A Study on the Prediction of Roundness Variation in Honing Using Hone Dynamics

    Volume 25, Issue 6 (November 1997)

    ISSN: 0090-3973

    CODEN: JTEOAD

    Page Count: 9


    Kim, J-D
    Korea Advanced Institute of Science and Technology, Taejon,

    Choi, M-S
    Korea Advanced Institute of Science and Technology, Taejon,

    (Received 20 November 1997; accepted 15 February 1997)

    Abstract

    This paper describes the simulation for estimating roundness variation according to the process variables in the honing process based on hone dynamics. Honing experiments were carried out to confirm the simulation results. The mandrel rotation speed and the workpiece stroke speed were treated as the main parameters in the simulation and the experiment. The honing force, which varies dynamically in the contact between the honing tool and workpiece, is the main cause of roundness variation. Honing tool and workpiece were assumed as a second-order system, i.e., a spring, mass and damper system in the modeling and analysis.


    Paper ID: JTE11495J

    DOI: 10.1520/JTE11495J

    ASTM International is a member of CrossRef.

    Author
    Title A Study on the Prediction of Roundness Variation in Honing Using Hone Dynamics
    Symposium , 0000-00-00
    Committee E28