Effect of Dither on Strain-Controlled Fatigue and Tensile Results Obtained with a Closed-Loop Servohydraulic Testing Machine

    Volume 13, Issue 6 (November 1985)

    ISSN: 0090-3973

    CODEN: JTEOAD

    Page Count: 4


    Bush, RW
    Research Assistant and Associate Professor, University of Rochester, Rochester, NY

    Quesnel, DJ
    Research Assistant and Associate Professor, University of Rochester, Rochester, NY

    Abstract

    The flow stress of alpha brass was found to decrease during strain-controlled tension tests when the dither amplitude was increased. It is suggested that when conducting such tests using specimens requiring low deformation loads that alternative means of preventing silting be used.


    Paper ID: JTE10973J

    DOI: 10.1520/JTE10973J

    ASTM International is a member of CrossRef.

    Author
    Title Effect of Dither on Strain-Controlled Fatigue and Tensile Results Obtained with a Closed-Loop Servohydraulic Testing Machine
    Symposium , 0000-00-00
    Committee E08