PARSA Portable X-Ray Analyzer for Residual Stresses
James M, Cohen JB
Abstract
The design, operation, and testing of a 7 to 11-kg hand-held X-ray device for measuring residual stresses are described. The instrument is based on a miniature X-ray tube and generator and a position-sensitive detector. No motion of the detector is needed to record a peak, eliminating the expensive and heavy gearing characteristic of a conventional diffractometer; the only mechanical motion during a measurement is one change of the orientation of the device to the object. An entirely portable instrument is therefore available for use in the plant or in the field. Tests are reported in which the stress is measured to ±40 MPa (± 6 ksi) or better in 4 to 20 s, depending on the specimen.

Keywords:
residual stress, portable equipment, X ray stress analysis, position sensitive detector

Paper ID: JTE10925J
DOI: 10.1520/JTE10925J

ASTM International is a member of CrossRef.
Author James M, Cohen JB Title PARSA Portable X-Ray Analyzer for Residual Stresses Symposium , 0000-00-00 Committee E28