Digital Library / Journals / Journal of Testing and Evaluation (JTE) / Citation Page

ISSN: 0090-3973
Published Online: 1 January 2008
Page Count: 10

Sample Preparation and Testing Methods for the Evaluation of Microcrystalline Waxes for the Seismic Protection of Art Objects
Crowley Anne, Laefer Debra, Fanning Mairead

Abstract
Use of microcrystalline waxes for the protection of ceramic art objects from seismic events is an inexpensive and relatively popular technique. Unfortunately, because of the high porosity of some ceramics and the fragility of their glazes and paints, the surface of many art objects may be vulnerable to damage from the microcrystalline wax. Thus, a conservative application approach is neededapplying only as much as is actually required for predicted levels of ground movement. Determining this quantity and verifying the best application technique (e.g., hot versus cold) has yet to be established. This paper presents the development of testing techniques to optimize the application of microcrystalline waxes; specifically, the pioneering of tensile and shear sample preparation. These procedures were applied to 70 tensile and 175 shear tests on paraffin wax, beeswax, and four microcrystalline waxes. Static testing methods demonstrated the clear superiority of certain products and average performance capabilities of up to 167 kN/m in tension and 89 kN/m in shear, under light loading.

Keywords:
seismic protection, art objects, museums, microcrystalline wax, tension, shear, thermoplastic acrylic resin

Paper ID: JTE100202
DOI: 10.1520/JTE100202
ASTM International is a member of CrossRef.