Digital Library / Journals / Journal of Testing and Evaluation (JTE) / Citation Page

ISSN: 0090-3973
Published Online: 1 March 2003
Page Count: 7

Testing of Protective Organic Coatings on Metals: Comparison of Salt Spray and Electrochemical Impedance Spectroscopy
Deflorian F, Rossi S, Fedrizzi L, Bonora PL

Abstract
Both electrochemical impedance spectroscopy (EIS) and the salt spray chamber are very popular techniques for testing the protective properties of organic coatings. It is common that the results obtained by the two methods often show significant differences and it is difficult to compare the performances.

This paper discusses some experimental results obtained on polyester-coated galvanized steel, analyzing the data dispersion of 36 identical samples tested both with EIS and salt spray. The morphology of degradation is very different because blisters develop in the salt spray chamber, but not in immersion. In order to quantify the degradation in the salt spray test, we propose a blister index (); the data dispersion of and the data dispersion of the parameters obtained by EIS are compared and discussed. A mechanism is proposed: only the double-layer capacitance can be compared with the development of blisters in the salt spray chamber while the barrier properties of the coating measured by EIS follow a completely different behavior.

Keywords:
electrochemical impedance spectroscopy, salt spray test, statistics, blistering, protective organic coating

Paper ID: JTE12416J
DOI: 10.1520/JTE12416J
ASTM International is a member of CrossRef.