|
SEDL / Journal of ASTM International (JAI) / First Look Papers
First Look Papers
Note to users: The section First Look Papers contains peer reviewed and accepted articles to be published in this journal. When the final article is assigned to an issue of the journal, the First Look Papers version will be removed from this section and will appear in the associated journal issue.
31 Year Evolution of the Rotating-Platform Total Knee Replacment: Coping With “Spinout” and Wear
Buechel F., Buechel F., Helbig T., Pappas M.
Page Count: 14
Published Online: 07 November 2011
Abstract
Download PDF
Paper ID: JAI103329
DOI: 10.1520/JAI103329
5083 Aluminum Alloy Welded Joints: Measurements of Mechanical Properties by DIC
Rivolta B., Silvestri A., Zappa E., Garghentini A.
Page Count: 9
Published Online: 20 December 2011
Abstract
Download PDF
Paper ID: JAI104307
DOI: 10.1520/JAI104307
A Method to Test Anterior-Posterior Construct Shear Fatigue Based on the Vertebrectomy Model
M. Jensen L., M. Dawson J.
Page Count: 7
Published Online: 12 December 2011
Abstract
Download PDF
Paper ID: JAI103505
DOI: 10.1520/JAI103505
A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
White C., Hunston D., Tean Tan K.
Page Count: 8
Published Online: 01 December 2011
Abstract
Download PDF
Paper ID: JAI104090
DOI: 10.1520/JAI104090
Adhesion of Thermally Sprayed Metallic Coating
Varavallo R., Manfrinato M., Rossino L., Maluf O., Camargo F.
Page Count: 11
Published Online: 04 January 2012
Abstract
Download PDF
Paper ID: JAI103414
DOI: 10.1520/JAI103414
ASTM F2624—Evaluating Alternate Fixtures for Flexion/Extention, Lateral Bending, and Axial Rotation Testing of Extra Discal Motion Preserving Implants
Anderson M., Lissy D.
Page Count: 9
Published Online: 12 December 2011
Abstract
Download PDF
Paper ID: JAI103510
DOI: 10.1520/JAI103510
Beryllium Measurement by Optical Fluorescence in Samples Contaminated by Strongly Fluorescent Impurities
Agrawal A., Adams L., Agrawal A., Cronin J., Lopez Tonazzi J., Duran B.
Page Count: 10
Published Online: 14 July 2011
Abstract
Download PDF
Paper ID: JAI103411
DOI: 10.1520/JAI103411
CFD-Simulation of Film Boiling at Steel Cooling Process
Kulju T., Pyykkönen J., Martin D., Muurinen E., Keiski R.
Page Count: 12
Published Online: 12 July 2011
Abstract
Download PDF
Paper ID: JAI103382
DOI: 10.1520/JAI103382
Characteristics of PAG Based Bio-Hydraulic Fluid
Khemchandani G., Greaves M.
Page Count: 6
Published Online: 03 October 2011
Abstract
Download PDF
Paper ID: JAI103605
DOI: 10.1520/JAI103605
Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years
Miehlke R., Miehlke R., Geyer R., Clemens U., Thiel B.
Page Count: 7
Published Online: 02 November 2011
Abstract
Download PDF
Paper ID: JAI103630
DOI: 10.1520/JAI103630
Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation
Marônek M., Bárta J., Bártová K.
Page Count: 10
Published Online: 10 November 2011
Abstract
Download PDF
Paper ID: JAI103375
DOI: 10.1520/JAI103375
Compressive Creep of Reinforced Polymeric Piling
Bozorg-Haddad A., Iskander M.
Page Count: 12
Published Online: 21 December 2011
Abstract
Download PDF
Paper ID: JAI103668
DOI: 10.1520/JAI103668
Correlating Accelerated Laboratory, Field, and Thermal Aging TPO Membranes
Xing L., Taylor T.
Page Count: 14
Published Online: 12 July 2011
Abstract
Download PDF
Paper ID: JAI103743
DOI: 10.1520/JAI103743
Crack Closure Behavior on a Variety of Materials under High Stress Ratios and Kmax Test Conditions
Yamada Y., Newman J.
Page Count: 12
Published Online: 21 October 2011
Abstract
Download PDF
Paper ID: JAI103973
DOI: 10.1520/JAI103973
Cracking Resistance and Impact Wear of Thin and Thick Hard Coatings Under Cyclic Loading
Kulu P., Saarna M., Sergejev F., Surženkov A., Sivitski A.
Page Count: 11
Published Online: 02 February 2012
Abstract
Download PDF
Paper ID: JAI104108
DOI: 10.1520/JAI104108
Creep Fatigue Behavior of Creep Strength Enhanced Ferritic Steels
Parker J.
Page Count: 11
Published Online: 04 August 2011
Abstract
Download PDF
Paper ID: JAI103888
DOI: 10.1520/JAI103888
Deflection Lag, Load Lag, and Time Lag of Buried Flexible Pipe
Howard A.
Page Count: 5
Published Online: 26 July 2011
Abstract
Download PDF
Paper ID: JAI102888
DOI: 10.1520/JAI102888
Design and Performance of Plastic Drainage Pipes in Environmental Containment Facilities
Brachman R.
Page Count: 13
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI102852
DOI: 10.1520/JAI102852
Detector Tube Method for Ammonia Compared to Ion Selective Electrode for Selected Class C and Class F Fly Ash
Butler S.
Page Count: 13
Published Online: 27 July 2011
Abstract
Download PDF
Paper ID: JAI103643
DOI: 10.1520/JAI103643
Developing Acceptable Surface Limits for Occupational Exposure to Pharmaceutical Substances
Kimmel T., Sussman R., Ku R., Ader A.
Page Count: 6
Published Online: 02 August 2011
Abstract
Download PDF
Paper ID: JAI103480
DOI: 10.1520/JAI103480
Discussion on “Mesothelioma in Drywall Finishing Workers,” by McCoy, M. J., Wolter, M. E., and Anderson, K. E.
Brodkin C., Cullen M., Balmes J., Redlich C., Hammar S.
Page Count: 3
Published Online: 26 July 2011
Abstract
Download PDF
Paper ID: JAI103829
DOI: 10.1520/JAI103829
Dynamic Behavior of Sand/Rubber Mixtures, Part II: Effect of Rubber Content on G/GO-γ-DT Curves and Volumetric Threshold Strain
Senetakis K., Anastasiadis A., Pitilakis K., Souli A.
Page Count: 12
Published Online: 25 October 2011
Abstract
Download PDF
Paper ID: JAI103711
DOI: 10.1520/JAI103711
Dynamic Behavior of Sand/Rubber Mixtures. Part I: Effect of Rubber Content and Duration of Confinement on Small-Strain Shear Modulus and Damping Ratio
Anastasiadis A., Senetakis K., Pitilakis K., Gargala C., Karakasi I.
Page Count: 19
Published Online: 25 October 2011
Abstract
Download PDF
Paper ID: JAI103680
DOI: 10.1520/JAI103680
Early Instability with Mobile Bearing Total Knee Arthroplasty: A Series of Twenty-Five Cases
Moskal J., Ridgeway S., Williams V.
Page Count: 9
Published Online: 12 December 2011
Abstract
Download PDF
Paper ID: JAI103130
DOI: 10.1520/JAI103130
Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
Kobasko N.
Page Count: 12
Published Online: 08 December 2011
Abstract
Download PDF
Paper ID: JAI104173
DOI: 10.1520/JAI104173
Effect of Chemical Modification of Al-Si Alloys on Thermal Diffusivity and Contact Heat Transfer at the Casting–Chill Interface
Prabhu K., Hegde S.
Page Count: 10
Published Online: 20 October 2011
Abstract
Download PDF
Paper ID: JAI104057
DOI: 10.1520/JAI104057
Effect of Creep and Oxidation on the Isothermal and Thermomechanical Fatigue Behavior of an Austenitic Stainless Steel
Christ H., Bauer V.
Page Count: 14
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI103557
DOI: 10.1520/JAI103557
Engineering Properties of Cement–Treated Granular Soil for Geotechnical Application
Dong P., Hayano K., Morikawa Y., Takahashi H.
Page Count: 15
Published Online: 17 January 2012
Abstract
Download PDF
Paper ID: JAI103733
DOI: 10.1520/JAI103733
Evaluation of Plasma Transferred Arc Fe-Al Alloyed Coatings
Sippel J., D’Oliveira A.
Page Count: 11
Published Online: 09 January 2012
Abstract
Download PDF
Paper ID: JAI103454
DOI: 10.1520/JAI103454
Groundwater Impacts from Leaching of Coal Combustion Products in Roadway Embankment Constructions
Li L., Peng B., Santos F., Li Y., Amini F.
Page Count: 12
Published Online: 26 July 2011
Abstract
Download PDF
Paper ID: JAI103659
DOI: 10.1520/JAI103659
How to Crawl Through a Pipe—Terminology
Howard A.
Page Count: 5
Published Online: 25 August 2011
Abstract
Download PDF
Paper ID: JAI102851
DOI: 10.1520/JAI102851
Improving the Confidence Level in Lead Clearance Examination Results through Modifications to Dust Sampling Protocols
Cox D., Dewalt F., White K., Schmehl R., Friedman W., Pinzer E.
Page Count: 12
Published Online: 02 August 2011
Abstract
Download PDF
Paper ID: JAI103469
DOI: 10.1520/JAI103469
Influence of Edge Restraint on Clip Fastener Loads of Standing Seam Metal Roof Panels
Dixon C., Prevatt D., Datin P.
Page Count: 16
Published Online: 12 July 2011
Abstract
Download PDF
Paper ID: JAI103704
DOI: 10.1520/JAI103704
Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement
Hossain Z., Solanki P., Zaman M., Lewis S., Hobson K.
Page Count: 18
Published Online: 21 September 2011
Abstract
Download PDF
Paper ID: JAI103679
DOI: 10.1520/JAI103679
Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
Kobasko N., Moskalenko A., Dobryvechir V., Protsenko L.
Page Count: 18
Published Online: 21 October 2011
Abstract
Download PDF
Paper ID: JAI104072
DOI: 10.1520/JAI104072
Kinematic Stability Evaluation of Spinal Fusion Devices by Synthetic FSU Model
Hansen T.
Page Count: 8
Published Online: 23 November 2011
Abstract
Download PDF
Paper ID: JAI103496
DOI: 10.1520/JAI103496
Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material
Nazarian S., Yuan D., Hoyos L., Puppala A.
Page Count: 12
Published Online: 01 November 2011
Abstract
Download PDF
Paper ID: JAI103714
DOI: 10.1520/JAI103714
Layer Growth Kinetics during Post-Discharge Nitriding
Oseguera J., Castillo F.
Page Count: 11
Published Online: 14 October 2011
Abstract
Download PDF
Paper ID: JAI103568
DOI: 10.1520/JAI103568
Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals
Antunes P., Corrêa E., Barbedo N., Souza P., Gonçalves J., Diacenco A.
Page Count: 9
Published Online: 04 January 2012
Abstract
Download PDF
Paper ID: JAI103436
DOI: 10.1520/JAI103436
Mechanical Characteristics of Degraded Silicone Bonded Point Supports
Hagl A.
Page Count: 14
Published Online: 24 October 2011
Abstract
Download PDF
Paper ID: JAI104061
DOI: 10.1520/JAI104061
Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades
Totten G., Casteletti L., Fernandes F., Gallego J.
Page Count: 11
Published Online: 12 December 2011
Abstract
Download PDF
Paper ID: JAI103564
DOI: 10.1520/JAI103564
Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching
Kobasko N., Guseynov S.
Page Count: 12
Published Online: 15 July 2011
Abstract
Download PDF
Paper ID: JAI103525
DOI: 10.1520/JAI103525
Modeling of Hardness of Low Alloy Steels by Means of Neural Networks
Penha R., Canale L., Canale A.
Page Count: 10
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI103299
DOI: 10.1520/JAI103299
Moisture and Rutting Resistances of Foamed Asphalt Mixtures Containing Recycled Coal Ash or Shingles With Moist Aggregates
Shivaprasad P., Xiao F., Amirkhanian S.
Page Count: 11
Published Online: 18 October 2011
Abstract
Download PDF
Paper ID: JAI103660
DOI: 10.1520/JAI103660
Moisture Sensitive Adhesives and Flooring Adhesive Failures
Nelson P., Hopps E.
Page Count: 6
Published Online: 19 September 2011
Abstract
Download PDF
Paper ID: JAI104092
DOI: 10.1520/JAI104092
Morphology of γ′ Precipitates in a First Stage Low Pressure Turbine Blade of a Ni-Based Superalloy after Service and after Following Aging
Miura N., Kondo Y.
Page Count: 9
Published Online: 04 October 2011
Abstract
Download PDF
Paper ID: JAI103463
DOI: 10.1520/JAI103463
Point Load Weight Functions for Semi-Elliptical Cracks in Finite Thickness Plate
Jin Z., Wang X.
Page Count: 14
Published Online: 14 October 2011
Abstract
Download PDF
Paper ID: JAI103962
DOI: 10.1520/JAI103962
Polyamide 12 Natural Gas Distribution Systems Operating at Pressures Greater Than 125 Psig
Wolf R.
Page Count: 7
Published Online: 24 August 2011
Abstract
Download PDF
Paper ID: JAI102862
DOI: 10.1520/JAI102862
Response to Discussion of “Mesothelioma in Drywall Finishing Workers” by McCoy, M. J., Wolter, M. E., and Anderson, K. E.
Anderson K.
Page Count: 4
Published Online: 01 August 2011
Abstract
Download PDF
Paper ID: JAI104059
DOI: 10.1520/JAI104059
Roller Profile Development for an Axially Loaded, Single Row Spherical Roller Bearing in an Oscillating Application
Cowles J., Houle C.
Page Count: 17
Published Online: 06 December 2011
Abstract
Download PDF
Paper ID: JAI103891
DOI: 10.1520/JAI103891
Round-Robin Evaluation of ASTM Standard Test Method E2798 for Spray Drift Reduction Adjuvants
Elsik C.
Page Count: 14
Published Online: 14 July 2011
Abstract
Download PDF
Paper ID: JAI103719
DOI: 10.1520/JAI103719
Sawdust Ash Stabilization of Reclaimed Asphalt Pavement
Osinubi K., Edeh J., Onoja W.
Page Count: 10
Published Online: 13 December 2011
Abstract
Download PDF
Paper ID: JAI103751
DOI: 10.1520/JAI103751
Service Life Assessment of a Low-Slope 55 % Al–Zn Alloy-Coated Steel Standing Seam Roof System
Haddock R., Dutton R.
Page Count: 19
Published Online: 14 July 2011
Abstract
Download PDF
Paper ID: JAI103745
DOI: 10.1520/JAI103745
Stability of Metallic Glasses: Criteria and Prediction of Ductile-Brittle Transition and Crystallization
Zaichenko S., Glezer A., Filippova V.
Page Count: 17
Published Online: 21 December 2011
Abstract
Download PDF
Paper ID: JAI103936
DOI: 10.1520/JAI103936
Standard Testing Methods for Mobile Bearing Knees
Walker P., Haider H.
Page Count: 8
Published Online: 19 December 2011
Abstract
Download PDF
Paper ID: JAI104299
DOI: 10.1520/JAI104299
Sustainable Use of Oil Sands for Geotechnical Construction and Road Building
Anochie-Boateng J., Tutumluer E.
Page Count: 15
Published Online: 23 December 2011
Abstract
Download PDF
Paper ID: JAI103651
DOI: 10.1520/JAI103651
Symposium on Static and Dynamic Spinal Implants: Are We Evaluating Them Appropriately? Effect of Tightening Torque on ASTM F1798 Axial Gripping Capacity
Vadapalli S., Woods D.
Page Count: 6
Published Online: 02 January 2012
Abstract
Download PDF
Paper ID: JAI103502
DOI: 10.1520/JAI103502
Technical Considerations When Fabricating PVC Pressure Fittings
Franzen T., Fisher C., Rahman S.
Page Count: 8
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI102856
DOI: 10.1520/JAI102856
The Effects of Dwell on the LCF Behavior of IN617
Shinde S., Gravett P.
Page Count: 11
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI103617
DOI: 10.1520/JAI103617
The Occurrence Mechanism of Periodicity of Creep Crack Path for P92
Nagumo Y., Yokobori A., Sugiura R., Matsuzaki T.
Page Count: 11
Published Online: 05 August 2011
Abstract
Download PDF
Paper ID: JAI103818
DOI: 10.1520/JAI103818
The Use of a Single-Level Construct Model to Evaluate Nonmetallic “Flexible” Rods
de la Borbolla I., Prevost J., Scifert C., Turner J.
Page Count: 13
Published Online: 19 January 2012
Abstract
Download PDF
Paper ID: JAI103500
DOI: 10.1520/JAI103500
Use of the ASTM Inter-Laboratory Studies (ILS) Program in Developing Precision Data for ASTM D5755 – Asbestos in Dust by Microvacuum Sampling
Millette J.
Page Count: 5
Published Online: 11 July 2011
Abstract
Download PDF
Paper ID: JAI103509
DOI: 10.1520/JAI103509
Vertebrectomy Model for the Mechanical Assessment of Fusionless Scoliosis Growth Rods
Shorez J.
Page Count: 7
Published Online: 01 October 2011
Abstract
Download PDF
Paper ID: JAI103493
DOI: 10.1520/JAI103493
Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications
Vandereecken P., Maton I.
Page Count: 7
Published Online: 25 July 2011
Abstract
Download PDF
Paper ID: JAI103960
DOI: 10.1520/JAI103960
Wear of Mobile Bearing Knees: Is It Necessarily Less?
Haider H., Kaddick C.
Page Count: 10
Published Online: 08 December 2011
Abstract
Download PDF
Paper ID: JAI104453
DOI: 10.1520/JAI104453
Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters
Hyde P., Vicars R., Fisher J., Hall R.
Page Count: 10
Published Online: 04 November 2011
Abstract
Download PDF
Paper ID: JAI103497
DOI: 10.1520/JAI103497
|