|
SEDL / Journal of ASTM International (JAI) / Table of Contents
|
2012
Volume 9, Issue 2
(February 2012)
|
|
THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.
Early Instability with Mobile Bearing Total Knee Arthroplasty: A Series of Twenty-Five Cases
Moskal J., Ridgeway S., Williams V.
Page Count: 9
Published: 01 February 2012
Abstract
Download PDF PDF (272K)
Paper ID: JAI103130
DOI: 10.1520/JAI103130
31 Year Evolution of the Rotating-Platform Total Knee Replacment: Coping With “Spinout” and Wear
Buechel F., Buechel F., Helbig T., Pappas M.
Page Count: 14
Published: 01 February 2012
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI103329
DOI: 10.1520/JAI103329
Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation
Marônek M., Bárta J., Bártová K.
Page Count: 10
Published: 01 February 2012
Abstract
Download PDF PDF (5.1M)
Paper ID: JAI103375
DOI: 10.1520/JAI103375
Adhesion of Thermally Sprayed Metallic Coating
Varavallo R., Manfrinato M., Rossino L., Maluf O., Camargo F.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (11M)
Paper ID: JAI103414
DOI: 10.1520/JAI103414
Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals
Antunes P., Corrêa E., Barbedo N., Souza P., Gonçalves J., Diacenco A.
Page Count: 9
Published: 01 February 2012
Abstract
Download PDF PDF (2.2M)
Paper ID: JAI103436
DOI: 10.1520/JAI103436
Evaluation of Plasma Transferred Arc Fe-Al Alloyed Coatings
Sippel J., D’Oliveira A.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (4.6M)
Paper ID: JAI103454
DOI: 10.1520/JAI103454
Morphology of γ′ Precipitates in a First Stage Low Pressure Turbine Blade of a Ni-Based Superalloy after Service and after Following Aging
Miura N., Kondo Y.
Page Count: 9
Published: 01 February 2012
Abstract
Download PDF PDF (3.0M)
Paper ID: JAI103463
DOI: 10.1520/JAI103463
Vertebrectomy Model for the Mechanical Assessment of Fusionless Scoliosis Growth Rods
Shorez J.
Page Count: 7
Published: 01 February 2012
Abstract
Download PDF PDF (808K)
Paper ID: JAI103493
DOI: 10.1520/JAI103493
Kinematic Stability Evaluation of Spinal Fusion Devices by Synthetic FSU Model
Hansen T.
Page Count: 8
Published: 01 February 2012
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI103496
DOI: 10.1520/JAI103496
Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters
Hyde P., Vicars R., Fisher J., Hall R.
Page Count: 10
Published: 01 February 2012
Abstract
Download PDF PDF (868K)
Paper ID: JAI103497
DOI: 10.1520/JAI103497
The Use of a Single-Level Construct Model to Evaluate Nonmetallic “Flexible” Rods
de la Borbolla I., Prevost J., Scifert C., Turner J.
Page Count: 13
Published: 01 February 2012
Abstract
Download PDF PDF (3.5M)
Paper ID: JAI103500
DOI: 10.1520/JAI103500
Symposium on Static and Dynamic Spinal Implants: Are We Evaluating Them Appropriately? Effect of Tightening Torque on ASTM F1798 Axial Gripping Capacity
Vadapalli S., Woods D.
Page Count: 6
Published: 01 February 2012
Abstract
Download PDF PDF (2.1M)
Paper ID: JAI103502
DOI: 10.1520/JAI103502
A Method to Test Anterior-Posterior Construct Shear Fatigue Based on the Vertebrectomy Model
M. Jensen L., M. Dawson J.
Page Count: 7
Published: 01 February 2012
Abstract
Download PDF PDF (632K)
Paper ID: JAI103505
DOI: 10.1520/JAI103505
ASTM F2624—Evaluating Alternate Fixtures for Flexion/Extention, Lateral Bending, and Axial Rotation Testing of Extra Discal Motion Preserving Implants
Anderson M., Lissy D.
Page Count: 9
Published: 01 February 2012
Abstract
Download PDF PDF (2.3M)
Paper ID: JAI103510
DOI: 10.1520/JAI103510
Rationale of a Test Setup with a Defined COR for Extra-Discal Motion-Preserving Implants with a Low Implant Stiffness
Schilling C., Krüger S., Beger J., Wing C.
Page Count: 13
Published: 01 February 2012
Abstract
Download PDF PDF (2.2M)
Paper ID: JAI103537
DOI: 10.1520/JAI103537
Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades
Totten G., Casteletti L., Fernandes F., Gallego J.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (4.5M)
Paper ID: JAI103564
DOI: 10.1520/JAI103564
Layer Growth Kinetics during Post-Discharge Nitriding
Oseguera J., Castillo F.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (580K)
Paper ID: JAI103568
DOI: 10.1520/JAI103568
Characteristics of PAG Based Bio-Hydraulic Fluid
Khemchandani G., Greaves M.
Page Count: 6
Published: 01 February 2012
Abstract
Download PDF PDF (512K)
Paper ID: JAI103605
DOI: 10.1520/JAI103605
Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years
Miehlke R., Miehlke R., Geyer R., Clemens U., Thiel B.
Page Count: 7
Published: 01 February 2012
Abstract
Download PDF PDF (680K)
Paper ID: JAI103630
DOI: 10.1520/JAI103630
Sustainable Use of Oil Sands for Geotechnical Construction and Road Building
Anochie-Boateng J., Tutumluer E.
Page Count: 15
Published: 01 February 2012
Abstract
Download PDF PDF (1.4M)
Paper ID: JAI103651
DOI: 10.1520/JAI103651
Moisture and Rutting Resistances of Foamed Asphalt Mixtures Containing Recycled Coal Ash or Shingles With Moist Aggregates
Shivaprasad P., Xiao F., Amirkhanian S.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (1.7M)
Paper ID: JAI103660
DOI: 10.1520/JAI103660
Compressive Creep of Reinforced Polymeric Piling
Bozorg-Haddad A., Iskander M.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (1.1M)
Paper ID: JAI103668
DOI: 10.1520/JAI103668
Sustainable Piling Made of Recycled Polymers: State of the Art Review
Iskander M.
Page Count: 15
Published: 01 February 2012
Abstract
Download PDF PDF (2.8M)
Paper ID: JAI103677
DOI: 10.1520/JAI103677
Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement
Hossain Z., Solanki P., Zaman M., Lewis S., Hobson K.
Page Count: 18
Published: 01 February 2012
Abstract
Download PDF PDF (1.5M)
Paper ID: JAI103679
DOI: 10.1520/JAI103679
Dynamic Behavior of Sand/Rubber Mixtures. Part I: Effect of Rubber Content and Duration of Confinement on Small-Strain Shear Modulus and Damping Ratio
Anastasiadis A., Senetakis K., Pitilakis K., Gargala C., Karakasi I.
Page Count: 19
Published: 01 February 2012
Abstract
Download PDF PDF (1.6M)
Paper ID: JAI103680
DOI: 10.1520/JAI103680
Case Study to Promote the Use of Industrial Byproducts: The Relevance of Performance Tests
Gomes Correia A., Roque A., Reis Ferreira S., Fortunato E.
Page Count: 18
Published: 01 February 2012
Abstract
Download PDF PDF (2.1M)
Paper ID: JAI103705
DOI: 10.1520/JAI103705
Dynamic Behavior of Sand/Rubber Mixtures, Part II: Effect of Rubber Content on G/GO-γ-DT Curves and Volumetric Threshold Strain
Senetakis K., Anastasiadis A., Pitilakis K., Souli A.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (1.8M)
Paper ID: JAI103711
DOI: 10.1520/JAI103711
Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material
Nazarian S., Yuan D., Hoyos L., Puppala A.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (3.8M)
Paper ID: JAI103714
DOI: 10.1520/JAI103714
Engineering Properties of Cement–Treated Granular Soil for Geotechnical Application
Dong P., Hayano K., Morikawa Y., Takahashi H.
Page Count: 15
Published: 01 February 2012
Abstract
Download PDF PDF (4.3M)
Paper ID: JAI103733
DOI: 10.1520/JAI103733
Sawdust Ash Stabilization of Reclaimed Asphalt Pavement
Osinubi K., Edeh J., Onoja W.
Page Count: 10
Published: 01 February 2012
Abstract
Download PDF PDF (596K)
Paper ID: JAI103751
DOI: 10.1520/JAI103751
Feasibility Study on Building-Derived Concrete Debris for Use in Highway Construction
Melton J., Clark C., Regis P.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI103753
DOI: 10.1520/JAI103753
Use of Post-Consumer Corrugated Fiberboard as Fine Aggregate Replacement in Controlled Low-Strength Materials
Hanson J., Stone G., Yesiller N.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI103843
DOI: 10.1520/JAI103843
Roller Profile Development for an Axially Loaded, Single Row Spherical Roller Bearing in an Oscillating Application
Cowles J., Houle C.
Page Count: 17
Published: 01 February 2012
Abstract
Download PDF PDF (3.7M)
Paper ID: JAI103891
DOI: 10.1520/JAI103891
Stability of Metallic Glasses: Criteria and Prediction of Ductile-Brittle Transition and Crystallization
Zaichenko S., Glezer A., Filippova V.
Page Count: 17
Published: 01 February 2012
Abstract
Download PDF PDF (548K)
Paper ID: JAI103936
DOI: 10.1520/JAI103936
Point Load Weight Functions for Semi-Elliptical Cracks in Finite Thickness Plate
Jin Z., Wang X.
Page Count: 14
Published: 01 February 2012
Abstract
Download PDF PDF (1.6M)
Paper ID: JAI103962
DOI: 10.1520/JAI103962
Crack Closure Behavior on a Variety of Materials under High Stress Ratios and Kmax Test Conditions
Yamada Y., Newman J.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (2.7M)
Paper ID: JAI103973
DOI: 10.1520/JAI103973
Effect of Chemical Modification of Al-Si Alloys on Thermal Diffusivity and Contact Heat Transfer at the Casting–Chill Interface
Prabhu K., Hegde S.
Page Count: 10
Published: 01 February 2012
Abstract
Download PDF PDF (680K)
Paper ID: JAI104057
DOI: 10.1520/JAI104057
Mechanical Characteristics of Degraded Silicone Bonded Point Supports
Hagl A.
Page Count: 14
Published: 01 February 2012
Abstract
Download PDF PDF (3.9M)
Paper ID: JAI104061
DOI: 10.1520/JAI104061
Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
Kobasko N., Moskalenko A., Dobryvechir V., Protsenko L.
Page Count: 18
Published: 01 February 2012
Abstract
Download PDF PDF (3.3M)
Paper ID: JAI104072
DOI: 10.1520/JAI104072
A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
White C., Hunston D., Tean Tan K.
Page Count: 8
Published: 01 February 2012
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI104090
DOI: 10.1520/JAI104090
Moisture Sensitive Adhesives and Flooring Adhesive Failures
Nelson P., Hopps E.
Page Count: 6
Published: 01 February 2012
Abstract
Download PDF PDF (60K)
Paper ID: JAI104092
DOI: 10.1520/JAI104092
Cracking Resistance and Impact Wear of Thin and Thick Hard Coatings Under Cyclic Loading
Kulu P., Saarna M., Sergejev F., Surženkov A., Sivitski A.
Page Count: 11
Published: 01 February 2012
Abstract
Download PDF PDF (2.0M)
Paper ID: JAI104108
DOI: 10.1520/JAI104108
Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
Kobasko N.
Page Count: 12
Published: 01 February 2012
Abstract
Download PDF PDF (1.8M)
Paper ID: JAI104173
DOI: 10.1520/JAI104173
Standard Testing Methods for Mobile Bearing Knees
Walker P., Haider H.
Page Count: 8
Published: 01 February 2012
Abstract
Download PDF PDF (3.7M)
Paper ID: JAI104299
DOI: 10.1520/JAI104299
5083 Aluminum Alloy Welded Joints: Measurements of Mechanical Properties by DIC
Rivolta B., Silvestri A., Zappa E., Garghentini A.
Page Count: 9
Published: 01 February 2012
Abstract
Download PDF PDF (2.6M)
Paper ID: JAI104307
DOI: 10.1520/JAI104307
Wear of Mobile Bearing Knees: Is It Necessarily Less?
Haider H., Kaddick C.
Page Count: 10
Published: 01 February 2012
Abstract
Download PDF PDF (1.4M)
Paper ID: JAI104453
DOI: 10.1520/JAI104453
|