SEDL / Journal of ASTM International (JAI) / Table of Contents


2011
Volume 8, Issue 8 (September 2011)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


How to Crawl Through a Pipe—Terminology
Howard A.
Page Count: 5
Published: 01 September 2011
Abstract
Download PDF PDF (64K)
Paper ID: JAI102851
DOI: 10.1520/JAI102851


Design and Performance of Plastic Drainage Pipes in Environmental Containment Facilities
Brachman R.
Page Count: 13
Published: 01 September 2011
Abstract
Download PDF PDF (616K)
Paper ID: JAI102852
DOI: 10.1520/JAI102852


Technical Considerations When Fabricating PVC Pressure Fittings
Franzen T., Fisher C., Rahman S.
Page Count: 8
Published: 01 September 2011
Abstract
Download PDF PDF (1.6M)
Paper ID: JAI102856
DOI: 10.1520/JAI102856


Polyamide 12 Natural Gas Distribution Systems Operating at Pressures Greater Than 125 Psig
Wolf R.
Page Count: 7
Published: 01 September 2011
Abstract
Download PDF PDF (76K)
Paper ID: JAI102862
DOI: 10.1520/JAI102862


Deflection Lag, Load Lag, and Time Lag of Buried Flexible Pipe
Howard A.
Page Count: 5
Published: 01 September 2011
Abstract
Download PDF PDF (204K)
Paper ID: JAI102888
DOI: 10.1520/JAI102888


Modeling of Hardness of Low Alloy Steels by Means of Neural Networks
Penha R., Canale L., Canale A.
Page Count: 10
Published: 01 September 2011
Abstract
Download PDF PDF (1.9M)
Paper ID: JAI103299
DOI: 10.1520/JAI103299


CFD-Simulation of Film Boiling at Steel Cooling Process
Kulju T., Pyykkönen J., Martin D., Muurinen E., Keiski R.
Page Count: 12
Published: 01 September 2011
Abstract
Download PDF PDF (1.4M)
Paper ID: JAI103382
DOI: 10.1520/JAI103382


Beryllium Measurement by Optical Fluorescence in Samples Contaminated by Strongly Fluorescent Impurities
Agrawal A., Adams L., Agrawal A., Cronin J., Lopez Tonazzi J., Duran B.
Page Count: 10
Published: 01 September 2011
Abstract
Download PDF PDF (872K)
Paper ID: JAI103411
DOI: 10.1520/JAI103411


Improving the Confidence Level in Lead Clearance Examination Results through Modifications to Dust Sampling Protocols
Cox D., Dewalt F., White K., Schmehl R., Friedman W., Pinzer E.
Page Count: 12
Published: 01 September 2011
Abstract
Download PDF PDF (480K)
Paper ID: JAI103469
DOI: 10.1520/JAI103469


Developing Acceptable Surface Limits for Occupational Exposure to Pharmaceutical Substances
Kimmel T., Sussman R., Ku R., Ader A.
Page Count: 6
Published: 01 September 2011
Abstract
Download PDF PDF (72K)
Paper ID: JAI103480
DOI: 10.1520/JAI103480


Use of the ASTM Inter-Laboratory Studies (ILS) Program in Developing Precision Data for ASTM D5755 – Asbestos in Dust by Microvacuum Sampling
Millette J.
Page Count: 5
Published: 01 September 2011
Abstract
Download PDF PDF (68K)
Paper ID: JAI103509
DOI: 10.1520/JAI103509


Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching
Kobasko N., Guseynov S.
Page Count: 12
Published: 01 September 2011
Abstract
Download PDF PDF (964K)
Paper ID: JAI103525
DOI: 10.1520/JAI103525


Effect of Creep and Oxidation on the Isothermal and Thermomechanical Fatigue Behavior of an Austenitic Stainless Steel
Christ H., Bauer V.
Page Count: 14
Published: 01 September 2011
Abstract
Download PDF PDF (1.6M)
Paper ID: JAI103557
DOI: 10.1520/JAI103557


The Effects of Dwell on the LCF Behavior of IN617
Shinde S., Gravett P.
Page Count: 11
Published: 01 September 2011
Abstract
Download PDF PDF (3.2M)
Paper ID: JAI103617
DOI: 10.1520/JAI103617


Detector Tube Method for Ammonia Compared to Ion Selective Electrode for Selected Class C and Class F Fly Ash
Butler S.
Page Count: 13
Published: 01 September 2011
Abstract
Download PDF PDF (680K)
Paper ID: JAI103643
DOI: 10.1520/JAI103643


Groundwater Impacts from Leaching of Coal Combustion Products in Roadway Embankment Constructions
Li L., Peng B., Santos F., Li Y., Amini F.
Page Count: 12
Published: 01 September 2011
Abstract
Download PDF PDF (3.5M)
Paper ID: JAI103659
DOI: 10.1520/JAI103659


Influence of Edge Restraint on Clip Fastener Loads of Standing Seam Metal Roof Panels
Dixon C., Prevatt D., Datin P.
Page Count: 16
Published: 01 September 2011
Abstract
Download PDF PDF (4.1M)
Paper ID: JAI103704
DOI: 10.1520/JAI103704


Round-Robin Evaluation of ASTM Standard Test Method E2798 for Spray Drift Reduction Adjuvants
Elsik C.
Page Count: 14
Published: 01 September 2011
Abstract
Download PDF PDF (2.1M)
Paper ID: JAI103719
DOI: 10.1520/JAI103719


Correlating Accelerated Laboratory, Field, and Thermal Aging TPO Membranes
Xing L., Taylor T.
Page Count: 14
Published: 01 September 2011
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI103743
DOI: 10.1520/JAI103743


Service Life Assessment of a Low-Slope 55 % Al–Zn Alloy-Coated Steel Standing Seam Roof System
Haddock R., Dutton R.
Page Count: 19
Published: 01 September 2011
Abstract
Download PDF PDF (3.3M)
Paper ID: JAI103745
DOI: 10.1520/JAI103745


The Occurrence Mechanism of Periodicity of Creep Crack Path for P92
Nagumo Y., Yokobori A., Sugiura R., Matsuzaki T.
Page Count: 11
Published: 01 September 2011
Abstract
Download PDF PDF (2.1M)
Paper ID: JAI103818
DOI: 10.1520/JAI103818


Creep Fatigue Behavior of Creep Strength Enhanced Ferritic Steels
Parker J.
Page Count: 11
Published: 01 September 2011
Abstract
Download PDF PDF (2.6M)
Paper ID: JAI103888
DOI: 10.1520/JAI103888


Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications
Vandereecken P., Maton I.
Page Count: 7
Published: 01 September 2011
Abstract
Download PDF PDF (1.0M)
Paper ID: JAI103960
DOI: 10.1520/JAI103960


Response to Discussion of “Mesothelioma in Drywall Finishing Workers” by McCoy, M. J., Wolter, M. E., and Anderson, K. E.
Anderson K.
Page Count: 4
Published: 01 September 2011
Abstract
Download PDF PDF (56K)
Paper ID: JAI104059
DOI: 10.1520/JAI104059