Journal of ASTM International (JAI) - 2011

SEDL / Journal of ASTM International (JAI) / Table of Contents

2011
Volume 8, Issue 5 (May 2011)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Size Effect Related to Composite Toughness Characterization
Yotte S., Breysse D.
Page Count: 18
Published: 01 May 2011
Abstract
Download PDF PDF (744K)
Paper ID: JAI102337
DOI: 10.1520/JAI102337

Hydrogen Absorption Mechanism of Zirconium Alloys Based on Characterization of Oxide Layer
Une K., Sakamoto K., Aomi M., Matsunaga J., Etoh Y., Takagi I., Miyamura S., Kobayashi T., Ito K.
Page Count: 21
Published: 01 May 2011
Abstract
Download PDF PDF (1008K)
Paper ID: JAI102950
DOI: 10.1520/JAI102950

Ultra Low Tin Quaternary Alloys PWR Performance—Impact of Tin Content on Corrosion Resistance, Irradiation Growth, and Mechanical Properties
Chabretou V., Hoffmann P., Trapp-Pritsching S., Garner G., Barberis P., Rebeyrolle V., Vermoyal J.
Page Count: 17
Published: 01 May 2011
Abstract
Download PDF PDF (652K)
Paper ID: JAI103013
DOI: 10.1520/JAI103013

Evaluation of Bias for Two Charpy Impact Machines with the Same Instrumented Striker
McCowan C., Lucon E., Santoyo R.
Page Count: 11
Published: 01 May 2011
Abstract
Download PDF PDF (320K)
Paper ID: JAI103239
DOI: 10.1520/JAI103239

Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels
Huber F., Bleck W.
Page Count: 11
Published: 01 May 2011
Abstract
Download PDF PDF (352K)
Paper ID: JAI103243
DOI: 10.1520/JAI103243

Corrosion Measurement Techniques in Steel Reinforced Concrete
Poursaee A.
Page Count: 15
Published: 01 May 2011
Abstract
Download PDF PDF (648K)
Paper ID: JAI103283
DOI: 10.1520/JAI103283

In Vitro Knee Wear, Kinematics, and Particle Morphology Among Different Bearing Geometries in a Mobile Bearing Knee System
Grupp T., Miehlke R., Hintner M., Schwiesau J., Kaddick C.
Page Count: 10
Published: 01 May 2011
Abstract
Download PDF PDF (396K)
Paper ID: JAI103304
DOI: 10.1520/JAI103304

Microstructural Characterization of an AISI D2 Tool Steel Submitted to Cryogenic Treatment
Farina P., Barbosa C., Goldenstein H.
Page Count: 8
Published: 01 May 2011
Abstract
Download PDF PDF (388K)
Paper ID: JAI103326
DOI: 10.1520/JAI103326

An Overview of Progress and New Developments in FTIR Lubricant Condition Monitoring Methodology
van de Voort F., Sedman J., Pinchuk D.
Page Count: 14
Published: 01 May 2011
Abstract
Download PDF PDF (288K)
Paper ID: JAI103344
DOI: 10.1520/JAI103344

Bubble Dynamics and Heat Transfer in Pool Boiling on Wires at Different Gravity
Zhao J., Wan S.
Page Count: 12
Published: 01 May 2011
Abstract
Download PDF PDF (536K)
Paper ID: JAI103379
DOI: 10.1520/JAI103379

Novel Formulations of an Organic Acid Herbicide
Penner D., Coleman R., Michael J.
Page Count: 5
Published: 01 May 2011
Abstract
Download PDF PDF (68K)
Paper ID: JAI103400
DOI: 10.1520/JAI103400

Laser Cladding and Heat Treatment of Ni–Co–Mo Maraging Steel
Zoran B., Marko S., Luis O., Janez G.
Page Count: 12
Published: 01 May 2011
Abstract
Download PDF PDF (900K)
Paper ID: JAI103435
DOI: 10.1520/JAI103435

Field Scale Evaluation of Spray Drift Reduction Technologies from Ground and Aerial Application Systems
Fritz B., Hoffmann W., Bagley W., Hewitt A.
Page Count: 11
Published: 01 May 2011
Abstract
Download PDF PDF (120K)
Paper ID: JAI103457
DOI: 10.1520/JAI103457

Bias in the Planimetric Procedure According to ASTM E112 and Corrected Method
Heping L., Xing Z.
Page Count: 6
Published: 01 May 2011
Abstract
Download PDF PDF (180K)
Paper ID: JAI103476
DOI: 10.1520/JAI103476

Evaluation of Asbestos in Dust on Surfaces by Micro-Vacuum and Wipe Sampling
Kominsky J., Millette J.
Page Count: 8
Published: 01 May 2011
Abstract
Download PDF PDF (284K)
Paper ID: JAI103477
DOI: 10.1520/JAI103477

Handwipe Method for Removing Lead from Skin
Esswein E., Boeniger M., Ashley K.
Page Count: 10
Published: 01 May 2011
Abstract
Download PDF PDF (224K)
Paper ID: JAI103527
DOI: 10.1520/JAI103527

Derivation of Clinically Relevant Boundary Conditions Suitable for Evaluation of Chronic Impingement of Lumbar Total Disk Replacement: Application to Standard Development
Rundell S., Rundell S., Day J., Day J., Isaza J., Siskey R., Siskey R., MacDonald D., Kurtz S., Kurtz S.
Page Count: 14
Published: 01 May 2011
Abstract
Download PDF PDF (244K)
Paper ID: JAI103556
DOI: 10.1520/JAI103556

Determination of Mercury in Crude Oil by Atomic Spectroscopy
Kishore Nadkarni R., Hwang J.
Page Count: 10
Published: 01 May 2011
Abstract
Download PDF PDF (88K)
Paper ID: JAI103559
DOI: 10.1520/JAI103559

Effects of the Environment on the Crack Propagation Behavior of IN718 in the Temperature Range of the Dynamic Embrittlement
Wackermann K., Krupp U., Christ H.
Page Count: 12
Published: 01 May 2011
Abstract
Download PDF PDF (332K)
Paper ID: JAI103569
DOI: 10.1520/JAI103569

Modeling Creep-Fatigue Deformation of Ni-Base Superalloys Using Crystal Viscoplasticity
Neu R., Smith D.
Page Count: 17
Published: 01 May 2011
Abstract
Download PDF PDF (428K)
Paper ID: JAI103674
DOI: 10.1520/JAI103674

Probabilistic Prediction of Crack Growth Based on Creep/Fatigue Damage Accumulation Mechanism
Wei Z., Yang F., Cheng H., Nikbin K.
Page Count: 15
Published: 01 May 2011
Abstract
Download PDF PDF (436K)
Paper ID: JAI103690
DOI: 10.1520/JAI103690

A Test Method for Evaluating Water Conditioning Adjuvants
Zollinger R., Bernards M., Peterson D., Young B., Dahl G., Gednalski J.
Page Count: 7
Published: 01 May 2011
Abstract
Download PDF PDF (236K)
Paper ID: JAI103729
DOI: 10.1520/JAI103729

Creep Crack Growth Under Complex Loading
Ainsworth R., Dean D., Budden P.
Page Count: 22
Published: 01 May 2011
Abstract
Download PDF PDF (528K)
Paper ID: JAI103847
DOI: 10.1520/JAI103847