Journal of ASTM International (JAI) - 2011

SEDL / Journal of ASTM International (JAI) / Table of Contents

2011
Volume 8, Issue 2 (February 2011)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Performance Characteristics of a Dual Fuel Engine Operated with Mahua Biodiesel and Liquefied Petroleum Gas
Kapilan N., Babu T., Reddy R.
Page Count: 12
Published: 01 February 2011
Abstract
Download PDF PDF (432K)
Paper ID: JAI102590
DOI: 10.1520/JAI102590

Study on the Role of Second Phase Particles in Hydrogen Uptake Behavior of Zirconium Alloys
Yao M., Wang J., Peng J., Zhou B., Li Q.
Page Count: 17
Published: 01 February 2011
Abstract
Download PDF PDF (728K)
Paper ID: JAI102948
DOI: 10.1520/JAI102948

Effects of Secondary Phase Particle Dissolution on the In-Reactor Performance of BWR Cladding
Valizadeh S., Ledergerber G., Abolhassan S., Jädernäs D., Dahlbäck M., Mader E., Zhou G., Wright J., Hallstadius L.
Page Count: 16
Published: 01 February 2011
Abstract
Download PDF PDF (472K)
Paper ID: JAI103025
DOI: 10.1520/JAI103025

Damage Build-Up in Zirconium Alloys During Mechanical Processing: Application to Cold Pilgering
Gaillac A., Lemaignan C., Barberis P.
Page Count: 16
Published: 01 February 2011
Abstract
Download PDF PDF (692K)
Paper ID: JAI103026
DOI: 10.1520/JAI103026

A Test Protocol to Quantify the Peel Resistance of Adhesive Applied Low Slope Roofing Specimens Subjected to Shear Loading
Baskaran A., Wu J., Tanaka H.
Page Count: 23
Published: 01 February 2011
Abstract
Download PDF PDF (808K)
Paper ID: JAI103034
DOI: 10.1520/JAI103034

Vehicle Emissions and Fuel Economy Effects of 16 % Butanol and Various Ethanol Blended Fuels (E10, E20, and E85)
Schulz M., Clark S.
Page Count: 19
Published: 01 February 2011
Abstract
Download PDF PDF (864K)
Paper ID: JAI103068
DOI: 10.1520/JAI103068

Characterization of Oxygen Distribution in LOCA Situations
Duriez C., Guilbert S., Stern A., Grandjean C., Bělovský L., Desquines J.
Page Count: 19
Published: 01 February 2011
Abstract
Download PDF PDF (596K)
Paper ID: JAI103156
DOI: 10.1520/JAI103156

Acid Number Determination of Biodiesel by Potentiometric Titration Using Different Methods
Gonçalves M., Cunha K., Sobral S., Gonzaga F., Fraga I., Borges P.
Page Count: 7
Published: 01 February 2011
Abstract
Download PDF PDF (116K)
Paper ID: JAI103163
DOI: 10.1520/JAI103163

Damage and Wear: An Important Distinction in Rotating Platform Knee Bearings
Currier J., Porter E., Mayor M., Collier J., Van Citters D.
Page Count: 10
Published: 01 February 2011
Abstract
Download PDF PDF (412K)
Paper ID: JAI103164
DOI: 10.1520/JAI103164

Comparison of Mobile Bearing and Fixed Bearing Total Knee Arthroplasty Outcomes: A Review of the Literature
Sykes J., Snearly C., Benner R., Bernard M., Mihalko W.
Page Count: 9
Published: 01 February 2011
Abstract
Download PDF PDF (220K)
Paper ID: JAI103168
DOI: 10.1520/JAI103168

Surface Hardening of an AISI D6 Cold Work Steel Using a Fiber Laser
Goia F., de Lima M.
Page Count: 9
Published: 01 February 2011
Abstract
Download PDF PDF (268K)
Paper ID: JAI103210
DOI: 10.1520/JAI103210

Ti–Al–Si–C–N Hard Coatings Synthesized by Hybrid Arc-Enhanced Magnetron Sputtering
Wu G., Liu S., Ma S., Xu K., Ji V., Chu P.
Page Count: 9
Published: 01 February 2011
Abstract
Download PDF PDF (416K)
Paper ID: JAI103223
DOI: 10.1520/JAI103223

The New EU Directives Requirements and the Innovation in Pesticide Application Techniques
Balsari P., Marucco P.
Page Count: 21
Published: 01 February 2011
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI103252
DOI: 10.1520/JAI103252

Evaluation of Cutting Edges Made of Nanocrystalline Cemented Carbides Sintered by the Pulse Plasma Method
Kupczyk M., Michalski A., Siwak P., Rosinski M.
Page Count: 9
Published: 01 February 2011
Abstract
Download PDF PDF (496K)
Paper ID: JAI103258
DOI: 10.1520/JAI103258

Accurate Determination of System Compliance and Young’s Modulus for Single Fibers
Ash J., Cross W., Kellar J., Kjerengtroen L.
Page Count: 11
Published: 01 February 2011
Abstract
Download PDF PDF (192K)
Paper ID: JAI103273
DOI: 10.1520/JAI103273

Effect of the Thermo-Mechanical Processing Characteristics on the Recrystallization of CuZn34 Brass
Lopes W., Corrêa E., Campos H., Aguilar M., Cetlin P.
Page Count: 10
Published: 01 February 2011
Abstract
Download PDF PDF (408K)
Paper ID: JAI103284
DOI: 10.1520/JAI103284

Wear of a Mobile Bearing Uni-Compartmental Knee Replacement Prosthesis: A Comparison of In Vitro and In Vivo Wear Rates
Ellison P., Traynor A., Casey B., Collins S.
Page Count: 6
Published: 01 February 2011
Abstract
Download PDF PDF (208K)
Paper ID: JAI103328
DOI: 10.1520/JAI103328

Enhancement of Heat Transfer Characteristics of Transformer Oil by Addition of Aluminium Nanoparticles
Rajesh E., Prabhu K.
Page Count: 11
Published: 01 February 2011
Abstract
Download PDF PDF (420K)
Paper ID: JAI103354
DOI: 10.1520/JAI103354

The Effect of Prior Tempering on Sub-Zero Treatment to Reduce Retained Austenite
Stratton P.
Page Count: 8
Published: 01 February 2011
Abstract
Download PDF PDF (540K)
Paper ID: JAI103361
DOI: 10.1520/JAI103361

Forced Convective Boiling of Ethylene Glycol/Water Mixtures Inside a Small Tube
Yu W., France D., Routbort J.
Page Count: 18
Published: 01 February 2011
Abstract
Download PDF PDF (3.6M)
Paper ID: JAI103378
DOI: 10.1520/JAI103378

Improved Zr-2.5Nb Pressure Tubes for Reduced Diametral Strain in Advanced CANDU Reactors
Bickel G., Griffiths M., Douchant A., Douglas S., Woo O., Buyers A.
Page Count: 14
Published: 01 February 2011
Abstract
Download PDF PDF (424K)
Paper ID: JAI103521
DOI: 10.1520/JAI103521