2010 Volume 7, Issue 2 (February 2010)

    THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


    Comparison of Workability Test Methods for Self-Consolidating Concrete

    Koehler E., Fowler D.

    Page Count: 19

    Published: 01 February 2010

    View Abstract Buy PDF (828K) $25

    Paper ID: JAI101927

    DOI: 10.1520/JAI101927


    Kinetic Monte Carlo Simulation of Helium-Bubble Evolution in ODS Steels

    Takahashi A., Sharafat S., Nagasawa K., Ghoniem N.

    Page Count: 14

    Published: 01 February 2010

    View Abstract Buy PDF (456K) $25

    Paper ID: JAI101971

    DOI: 10.1520/JAI101971


    Using Directional Flame Thermometers for Measuring Thermal Exposure

    Keltner N., Beck J., Nakos J.

    Page Count: 12

    Published: 01 February 2010

    View Abstract Buy PDF (828K) $25

    Paper ID: JAI102280

    DOI: 10.1520/JAI102280


    Experimental Investigation of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 2: Engine Durability and Effect on Lubricating Oil

    Agarwal A., Dhar A.

    Page Count: 15

    Published: 01 February 2010

    View Abstract Buy PDF (660K) $25

    Paper ID: JAI102415

    DOI: 10.1520/JAI102415


    Characterization of Density of Biodiesel from Soybean, Sunflower, Canola, and Beef Tallow in Relation to Temperature, Using a Digital Density Meter with a Metrological Point of View

    Santo Filho D., de Abreu F., Pereira R., Siqueira J., dos Santos Júnior J., Daroda R.

    Page Count: 6

    Published: 01 February 2010

    View Abstract Buy PDF (88K) $25

    Paper ID: JAI102430

    DOI: 10.1520/JAI102430


    Determining the Air-Entraining Admixture Dosage Response for Concrete with a Single Concrete Mixture

    Ley M.

    Page Count: 11

    Published: 01 February 2010

    View Abstract Buy PDF (124K) $25

    Paper ID: JAI102463

    DOI: 10.1520/JAI102463


    Evaluation of Two Automated Methods for Air-Void Analysis of Hardened Concrete

    Ramezanianpour A., Hooton R.

    Page Count: 9

    Published: 01 February 2010

    View Abstract Buy PDF (212K) $25

    Paper ID: JAI102476

    DOI: 10.1520/JAI102476


    Low-Temperature Thermo-Cycling of FINEMET and Metglas Amorphous Alloys: Last Achievements in Theory and Experiments

    Zaichenko S., Perov N., Glezer A.

    Page Count: 11

    Published: 01 February 2010

    View Abstract Buy PDF (204K) $25

    Paper ID: JAI102479

    DOI: 10.1520/JAI102479


    A Weibull Stress Model to Predict Effects of Weld Strength Mismatch on Cleavage Fracture Toughness

    Ruggieri C.

    Page Count: 11

    Published: 01 February 2010

    View Abstract Buy PDF (248K) $25

    Paper ID: JAI102508

    DOI: 10.1520/JAI102508


    Microstructure and Fatigue Strength of the Bearing Steel 52100 after Shortened Bainitic Treatment

    Dong J., Vetters H., Hoffmann F., Zoch H.

    Page Count: 10

    Published: 01 February 2010

    View Abstract Buy PDF (304K) $25

    Paper ID: JAI102511

    DOI: 10.1520/JAI102511


    Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall

    Branch N., Arakere N., Svendsen V., Forster N.

    Page Count: 18

    Published: 01 February 2010

    View Abstract Buy PDF (980K) $25

    Paper ID: JAI102529

    DOI: 10.1520/JAI102529


    Quantitative Relationship between Degree of Center Segregation and Large Carbide Size in Continuously Cast Bloom of High Carbon Chromium Bearing Steel

    Kim K., Oh K., Lee J., Lee D.

    Page Count: 9

    Published: 01 February 2010

    View Abstract Buy PDF (412K) $25

    Paper ID: JAI102533

    DOI: 10.1520/JAI102533


    Importance of Residual Stresses and Surface Roughness regarding Fatigue of Titanium Forgings

    Oberwinkler B., Riedler M., Eichlseder W.

    Page Count: 11

    Published: 01 February 2010

    View Abstract Buy PDF (576K) $25

    Paper ID: JAI102534

    DOI: 10.1520/JAI102534


    The Role of Hydrogen on Rolling Contact Fatigue Response of Rolling Element Bearings

    Vegter R., Slycke J.

    Page Count: 12

    Published: 01 February 2010

    View Abstract Buy PDF (372K) $25

    Paper ID: JAI102543

    DOI: 10.1520/JAI102543


    Corrosion of Fe-Based Nanocrystalline Alloys with Soft Magnetic Properties

    Sousa C., Kiminami C.

    Page Count: 12

    Published: 01 February 2010

    View Abstract Buy PDF (184K) $25

    Paper ID: JAI102563

    DOI: 10.1520/JAI102563


    Characterization of Corn Grains for Dry-Grind Ethanol Production

    Srichuwong S., Gutesa J., Blanco M., Duvick S., Gardner C., Jane J.

    Page Count: 10

    Published: 01 February 2010

    View Abstract Buy PDF (284K) $25

    Paper ID: JAI102568

    DOI: 10.1520/JAI102568


    Glass Formation and Mechanical Properties of Ti–Cu–Ni Alloys with High Ti Content

    Zhang S., Hu G., Meng Q., Li J.

    Page Count: 8

    Published: 01 February 2010

    View Abstract Buy PDF (388K) $25

    Paper ID: JAI102569

    DOI: 10.1520/JAI102569


    Use of Fe–31Mn–7.5Al–1.3Si–0.9C Alloy for Fabrication of Resistive Elements

    Casteletti L., Lombardi Neto A., Totten G., Heck S., Fernandes F.

    Page Count: 4

    Published: 01 February 2010

    View Abstract Buy PDF (196K) $25

    Paper ID: JAI102605

    DOI: 10.1520/JAI102605


    Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue

    Tsunekage N., Hashimoto K., Fujimatsu T., Hiraoka K.

    Page Count: 9

    Published: 01 February 2010

    View Abstract Buy PDF (248K) $25

    Paper ID: JAI102612

    DOI: 10.1520/JAI102612


    Water Content Determination in Biodiesel: Optimization of Methodology in Coulometric Karl Fischer Titration

    Vicentim M., Barreto Sousa M., Fernandes da Silva V., Mateus V., Rodrigues J., Smarçaro da Cunha V.

    Page Count: 7

    Published: 01 February 2010

    View Abstract Buy PDF (140K) $25

    Paper ID: JAI102615

    DOI: 10.1520/JAI102615


    Recommendations for an ASTM Standardized Test for Determining GIIc of Unidirectional Laminated Polymeric Matrix Composites

    Davidson B., Teller S.

    Page Count: 11

    Published: 01 February 2010

    View Abstract Buy PDF (236K) $25

    Paper ID: JAI102619

    DOI: 10.1520/JAI102619


    Modeling the Influence of Microstructure in Rolling Contact Fatigue

    Alley E., Sawamiphakdi K., Anderson P., Neu R.

    Page Count: 20

    Published: 01 February 2010

    View Abstract Buy PDF (808K) $25

    Paper ID: JAI102629

    DOI: 10.1520/JAI102629


    Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape

    Liščić B., Singer S., Smoljan B.

    Page Count: 17

    Published: 01 February 2010

    View Abstract Buy PDF (1.1M) $25

    Paper ID: JAI102647

    DOI: 10.1520/JAI102647


    Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media

    Ikkene R., Ikkene R., Koudil Z., Mouzali M.

    Page Count: 10

    Published: 01 February 2010

    View Abstract Buy PDF (344K) $25

    Paper ID: JAI102660

    DOI: 10.1520/JAI102660


    Proposed Masonry Specified Compressive Strength Requirements

    Bennett R.

    Page Count: 7

    Published: 01 February 2010

    View Abstract Buy PDF (80K) $25

    Paper ID: JAI102663

    DOI: 10.1520/JAI102663