Journal of ASTM International (JAI) - 2009

SEDL / Journal of ASTM International (JAI) / Table of Contents

2009
Volume 6, Issue 1 (January 2009)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Thermal Conductance of Ball Bearings in Vacuum: A Review
Takeuchi Y., Dickey J., Eby M., Davis S.
Page Count: 12
Published: 01 January 2009
Abstract
Download PDF PDF (408K)
Paper ID: JAI101217
DOI: 10.1520/JAI101217

Potential Risk Factors for Knee Injuries in Alpine Skiers
Burtscher M., Sommersacher R., Ruedl G., Nachbauer W.
Page Count: 4
Published: 01 January 2009
Abstract
Download PDF PDF (60K)
Paper ID: JAI101378
DOI: 10.1520/JAI101378

Evaporation of Pesticide Droplets on Surfaces Under Various Relative Humidity Conditions
Yu Y., Zhu H., Ozkan H.
Page Count: 8
Published: 01 January 2009
Abstract
Download PDF PDF (168K)
Paper ID: JAI101491
DOI: 10.1520/JAI101491

Soil Water Measurements Relevant to Agronomic and Environmental Functions of Chemically Treated Soil
Sojka R., Lehrsch G., Kostka S., Reed J., Koehn A., Foerster J.
Page Count: 20
Published: 01 January 2009
Abstract
Download PDF PDF (372K)
Paper ID: JAI101497
DOI: 10.1520/JAI101497

Effects of Contamination of Biobased Hydraulic Fluids with Mineral Oil
Theissen H.
Page Count: 9
Published: 01 January 2009
Abstract
Download PDF PDF (404K)
Paper ID: JAI101598
DOI: 10.1520/JAI101598

The Effects of Lubricant Ingredients on New Hydraulic Oil Cleanliness
Sander J., Mauritz S., Smith T., Turner J., Courtney S.
Page Count: 9
Published: 01 January 2009
Abstract
Download PDF PDF (76K)
Paper ID: JAI101622
DOI: 10.1520/JAI101622

Ski Bindings and Lower Leg Injuries, A Case Control Study in Flaine, 2006
Laporte J., Binet M., Fenet N., Constans D., Joubert P.
Page Count: 12
Published: 01 January 2009
Abstract
Download PDF PDF (272K)
Paper ID: JAI101625
DOI: 10.1520/JAI101625

Atomic Force Microscopy of Geroler Motor Wear Debris Ferrograms
Michael P., Bergesen A., Blazel B., Kimball A., Wanke T.
Page Count: 12
Published: 01 January 2009
Abstract
Download PDF PDF (460K)
Paper ID: JAI101628
DOI: 10.1520/JAI101628

Safer Ski Jump Landing Surface Design Limits Normal Impact Velocity
Hubbard M.
Page Count: 9
Published: 01 January 2009
Abstract
Download PDF PDF (288K)
Paper ID: JAI101630
DOI: 10.1520/JAI101630

Morpholine Amide Solvent: A New Inert
Stern A., Ferguson D.
Page Count: 5
Published: 01 January 2009
Abstract
Download PDF PDF (116K)
Paper ID: JAI101652
DOI: 10.1520/JAI101652

Engine Oil Volatility: Noack Evaporation Methods
Kishore Nadkarni R.
Page Count: 5
Published: 01 January 2009
Abstract
Download PDF PDF (64K)
Paper ID: JAI101691
DOI: 10.1520/JAI101691

Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels
Kobasko N.
Page Count: 13
Published: 01 January 2009
Abstract
Download PDF PDF (296K)
Paper ID: JAI101757
DOI: 10.1520/JAI101757

Heat Transfer During Quenching and Assessment of Quench Severity—A Review
Prabhu K., Fernandes P.
Page Count: 17
Published: 01 January 2009
Abstract
Download PDF PDF (316K)
Paper ID: JAI101784
DOI: 10.1520/JAI101784

An Investigation on Quenching Performance of Hot Alkaline Bath
Raygan S., Rassizadehghani J., Askari M.
Page Count: 10
Published: 01 January 2009
Abstract
Download PDF PDF (632K)
Paper ID: JAI101790
DOI: 10.1520/JAI101790

One More Discussion “What is Intensive Quenching Process?”
Kobasko N., Aronov M., Powell J., Totten G.
Page Count: 11
Published: 01 January 2009
Abstract
Download PDF PDF (252K)
Paper ID: JAI101792
DOI: 10.1520/JAI101792

Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA
MacKenzie D., Kumar A., Metwally H., Paingankar S., Li Z., Ferguson B.
Page Count: 10
Published: 01 January 2009
Abstract
Download PDF PDF (468K)
Paper ID: JAI101796
DOI: 10.1520/JAI101796

A Novel Approach to Model Moving Heat Sources
Fischer F., Krempaszky C., Očenášek J., Očenášek J., Werner E.
Page Count: 6
Published: 01 January 2009
Abstract
Download PDF PDF (736K)
Paper ID: JAI101815
DOI: 10.1520/JAI101815

Accurate Determination of Surface Heat Fluxes During Quenching Characterized by Boiling Water Heat Transfer
Wells M., Daun K.
Page Count: 17
Published: 01 January 2009
Abstract
Download PDF PDF (324K)
Paper ID: JAI101818
DOI: 10.1520/JAI101818

The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders
Frerichs F., Luebben T.
Page Count: 15
Published: 01 January 2009
Abstract
Download PDF PDF (292K)
Paper ID: JAI101852
DOI: 10.1520/JAI101852

Hydrogen-Related Degradation of Mechanical Properties of Titanium and Titanium Alloys
Asaoka K., Maejima K.
Page Count: 8
Published: 01 January 2009
Abstract
Download PDF PDF (276K)
Paper ID: JAI101853
DOI: 10.1520/JAI101853

An Expert System for Estimation of Fatigue Properties from Simple Tensile Data or Hardness
Lee K., Song J.
Page Count: 15
Published: 01 January 2009
Abstract
Download PDF PDF (600K)
Paper ID: JAI101855
DOI: 10.1520/JAI101855

A Comparison of Peak Linear and Angular Headform Accelerations Using Ice Hockey Helmets
Rousseau P., Post A., Hoshizaki T.
Page Count: 11
Published: 01 January 2009
Abstract
Download PDF PDF (288K)
Paper ID: JAI101877
DOI: 10.1520/JAI101877

Analysis of the Segerberg Hardening Power Equation
Chun-huai C., Jing-en Z.
Page Count: 8
Published: 01 January 2009
Abstract
Download PDF PDF (128K)
Paper ID: JAI101922
DOI: 10.1520/JAI101922