SEDL / Journal of ASTM International (JAI) / Table of Contents

2006 Volume 3, Issue 5 (May 2006)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Comparison of the Corrosion Fatigue Characteristics of 23Mn-21Cr-1Mo Low Nickel, 22Cr-13Ni-5Mn, and 18Cr-14Ni-2.5Mo Stainless Steels
Roach M., Williamson R., Zardiackas L.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (564K)
Paper ID: JAI100504
DOI: 10.1520/JAI100504

Simulative Performance Test for Hot Mix Asphalt Using Asphalt Pavement Analyzer
Kandhal P., Cooley L.
Page Count: 9
Published: 01 May 2006
Abstract
Download PDF PDF (152K)
Paper ID: JAI12255
DOI: 10.1520/JAI12255

Dynamic Finite Element Modeling of Fracture in Charpy V-Notch Specimens of Weld Material 72W
McCoy J., Kumar A.
Page Count: 12
Published: 01 May 2006
Abstract
Download PDF PDF (264K)
Paper ID: JAI12451
DOI: 10.1520/JAI12451

The Importance of Integrating Flashing and the Water Resistive Barrier in the Exterior Wall Systems of Residential Buildings
Dorin L.
Page Count: 6
Published: 01 May 2006
Abstract
Download PDF PDF (64K)
Paper ID: JAI12489
DOI: 10.1520/JAI12489

Durability Testing of Polyurethane Foam Sealant in the Window-Wall Interface
Braun R., Garcia J.
Page Count: 6
Published: 01 May 2006
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI12497
DOI: 10.1520/JAI12497

Thermal Residual Stress Relaxation in Powder Metal IN100 Superalloy
Buchanan D., John R., Ashbaugh N.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (344K)
Paper ID: JAI12552
DOI: 10.1520/JAI12552

Modeling the Formation and Growth of Cracks from Cold-Worked Holes
Fujimoto W.
Page Count: 19
Published: 01 May 2006
Abstract
Download PDF PDF (628K)
Paper ID: JAI12559
DOI: 10.1520/JAI12559

The Use of Digital Image Correlation to Verify the Behavior of Fiber Metal Laminate Cylinders under Torsional Loading
Backman D., Jodoin A., Poon C., Mendis Y.
Page Count: 9
Published: 01 May 2006
Abstract
Download PDF PDF (312K)
Paper ID: JAI12763
DOI: 10.1520/JAI12763

Prediction of Effective Stiffness of a Cross-Ply Laminate with Transverse Matrix Cracks
Zhang H., Minnetyan L.
Page Count: 14
Published: 01 May 2006
Abstract
Download PDF PDF (152K)
Paper ID: JAI12822
DOI: 10.1520/JAI12822

Analysis of Error in Pavement Ground Truth Indicators for Evaluating the Accuracy of Automated Image Collection and Analysis System
Lee H., Kim J.
Page Count: 15
Published: 01 May 2006
Abstract
Download PDF PDF (304K)
Paper ID: JAI13093
DOI: 10.1520/JAI13093

Volumetric and Surface Positron Annihilation Studies of Fatigue Damage Accumulation in a Steel Alloy
Glancey C., Stephens R.
Page Count: 10
Published: 01 May 2006
Abstract
Download PDF PDF (324K)
Paper ID: JAI13181
DOI: 10.1520/JAI13181

Application of the Reference Temperature to the Evaluation of Cleavage Fracture in HSLA-100 Steel
Graham S., Mercier G., L'Heureux B.
Page Count: 12
Published: 01 May 2006
Abstract
Download PDF PDF (468K)
Paper ID: JAI13191
DOI: 10.1520/JAI13191

Creep Crack Growth Predictions in Component Using a Damage Based Approach
Yatomi M., Nikbin K.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (260K)
Paper ID: JAI13198
DOI: 10.1520/JAI13198

Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel
Tabuchi M., Hongo H., Watanabe T., Yokobori A.
Page Count: 9
Published: 01 May 2006
Abstract
Download PDF PDF (180K)
Paper ID: JAI13226
DOI: 10.1520/JAI13226

Residue Analysis on Implants
Luginbuehl R., Gasser B., Frauchiger V.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (224K)
Paper ID: JAI13390
DOI: 10.1520/JAI13390

Validation of a Gravimetric Procedure for Recovery of Processing Materials from Porous Coated Metal Implants
Moseley J., Hooper M., Bible S.
Page Count: 7
Published: 01 May 2006
Abstract
Download PDF PDF (316K)
Paper ID: JAI13392
DOI: 10.1520/JAI13392

Attenuation of Radiation Damage and Neutron Field in Reactor Pressure Vessel Wall
Brumovsky M., Marek M., Zerola L., Viererbl L., Golovanov V., Lichadeyev V., Raetsky B., Petelin A.
Page Count: 6
Published: 01 May 2006
Abstract
Download PDF PDF (144K)
Paper ID: JAI13487
DOI: 10.1520/JAI13487

Evaluation and Comparison Between Oxidation Stability Test Methods for Turbine Oils
Pach M., Zobel H., Norrby T.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (344K)
Paper ID: JAI13507
DOI: 10.1520/JAI13507

Water Conditioner Adjuvant and Fertilizer Formulation Effect on Micronutrient-Glyphosate Tank Mixtures
Bernards M., Penner D., Michael J.
Page Count: 8
Published: 01 May 2006
Abstract
Download PDF PDF (92K)
Paper ID: JAI13525
DOI: 10.1520/JAI13525

Wind Tunnel Evaluation of Drift Reduction Potential and Spray Characteristics with Drift Retardants at High Operating Pressure
Guler H., Zhu H., Ozkan E., Derksen R., Krause C.
Page Count: 9
Published: 01 May 2006
Abstract
Download PDF PDF (312K)
Paper ID: JAI13527
DOI: 10.1520/JAI13527

Ignition of a Composite Cylinder with Plastic Liner
Barthélémy H.
Page Count: 4
Published: 01 May 2006
Abstract
Download PDF PDF (148K)
Paper ID: JAI13531
DOI: 10.1520/JAI13531

Combustion Tests Under High Pressure Oxygen: Promoted Ignition Combustion Test Versus Metallic Disk Ignition Test
Binder C., Kasch T., Lehné S., Beck U., Weise M., Sahre M.
Page Count: 5
Published: 01 May 2006
Abstract
Download PDF PDF (144K)
Paper ID: JAI13532
DOI: 10.1520/JAI13532

Mechanical Impact of Aluminum Alloy Gas Cylinder Pressurized with Oxygen
Chiffoleau G., Newton B., Holroyd N., Havercroft S.
Page Count: 11
Published: 01 May 2006
Abstract
Download PDF PDF (164K)
Paper ID: JAI13534
DOI: 10.1520/JAI13534

Surface Ignition of Aluminum in Oxygen
Chiffoleau G., Newton B., Holroyd N., Havercroft S.
Page Count: 12
Published: 01 May 2006
Abstract
Download PDF PDF (332K)
Paper ID: JAI13536
DOI: 10.1520/JAI13536

Analysis Tools Used to Evaluate Oxygen Hazards and the Oxygen Compatibility of Metals
Forsyth E., Newton B., Chiffoleau G.
Page Count: 12
Published: 01 May 2006
Abstract
Download PDF PDF (424K)
Paper ID: JAI13540
DOI: 10.1520/JAI13540

Proficiency Testing for Evaluating Aerospace Materials Test Anomalies
Hirsch D., Motto S., Peyton G., Beeson H.
Page Count: 6
Published: 01 May 2006
Abstract
Download PDF PDF (68K)
Paper ID: JAI13547
DOI: 10.1520/JAI13547

Investigation of Oxygen-Acetylene Flashback Reactions in Welding Hoses
Newton B., Pryor D., Chiffoleau G., Beeson H.
Page Count: 13
Published: 01 May 2006
Abstract
Download PDF PDF (688K)
Paper ID: JAI13550
DOI: 10.1520/JAI13550

Materials Compatibility with Nitrogen Trifluoride (NF₃)
Newton B., Chiffoleau G.
Page Count: 16
Published: 01 May 2006
Abstract
Download PDF PDF (440K)
Paper ID: JAI13552
DOI: 10.1520/JAI13552

A Metallurgist's Views on the Selection of Engineering Alloys for Applications Involving Oxygen-Enriched Atmospheres: Keynote Address
Zawierucha R.
Page Count: 10
Published: 01 May 2006
Abstract
Download PDF PDF (116K)
Paper ID: JAI13573
DOI: 10.1520/JAI13573

Application of Low Plasticity Burnishing (LPB) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems
Hornbach D., Prevey P., Loftus E.
Page Count: 10
Published: 01 May 2006
Abstract
Download PDF PDF (312K)
Paper ID: JAI13580
DOI: 10.1520/JAI13580

Simulation of Heat Transfer and Residual Stresses from Cooling Curves Obtained in Quenching Studies
Penha R., Canale L., Totten G., Sarmiento G., Ventura J.
Page Count: 14
Published: 01 May 2006
Abstract
Download PDF PDF (728K)
Paper ID: JAI13614
DOI: 10.1520/JAI13614

On Piste Fatalities in Recreational Snow Sports in the U.S
Shealy J., Johnson R., Ettlinger C.
Page Count: 8
Published: 01 May 2006
Abstract
Download PDF PDF (184K)
Paper ID: JAI13893
DOI: 10.1520/JAI13893

Evaluation Procedures of Nonmetallic Inclusions in Steel for Highly Reliable Bearings
Unigame Y., Hiraoka K., Takasu I., Kato Y.
Page Count: 8
Published: 01 May 2006
Abstract
Download PDF PDF (332K)
Paper ID: JAI14030
DOI: 10.1520/JAI14030

Study on Flaking Process in Bearings by White Etching Area Generation
Hiraoka K., Nagao M., Isomoto T.
Page Count: 7
Published: 01 May 2006
Abstract
Download PDF PDF (380K)
Paper ID: JAI14059
DOI: 10.1520/JAI14059

Micro-Plastic Material Model and Residual Fields in Rolling Contacts
Popescu G., Gabelli A., Espejel G., Wemekamp B.
Page Count: 12
Published: 01 May 2006
Abstract
Download PDF PDF (124K)
Paper ID: JAI14063
DOI: 10.1520/JAI14063

Development of a Supermartensitic Stainless Steel Microalloyed with Niobium
Rodrigues C., Lorenzo P., Sokolowski A., Barbosa A., Rollo J.
Page Count: 5
Published: 01 May 2006
Abstract
Download PDF PDF (140K)
Paper ID: JAI14086
DOI: 10.1520/JAI14086

Effect of Coatings-Orientants on Antifriction Properties of Lubricants in Tribounits under Boundary Lubrication
Levchenko V., Buyanovsky I., Ignatieva Z., Matveenko V.
Page Count: 10
Published: 01 May 2006
Abstract
Download PDF PDF (204K)
Paper ID: JAI14105
DOI: 10.1520/JAI14105

Sports Activity after Total Knee Arthroplasty
Yamagishi T., Suzuki H., Shizuka M., Kikuchi T.
Page Count: 5
Published: 01 May 2006
Abstract
Download PDF PDF (84K)
Paper ID: JAI14198
DOI: 10.1520/JAI14198

Observational Study on Fall Trends in Snowboarders
Cooper N., Cooper N., Greenwald R.
Page Count: 7
Published: 01 May 2006
Abstract
Download PDF PDF (128K)
Paper ID: JAI14201
DOI: 10.1520/JAI14201

Explanation of the Origin of Distortion and Residual Stress in Water Quenched Cylinders Using Computer Simulation
Arimoto K., Horino T., Ikuta F., Jin C., Tamura S., Narazaki M.
Page Count: 22
Published: 01 May 2006
Abstract
Download PDF PDF (944K)
Paper ID: JAI14204
DOI: 10.1520/JAI14204