SEDL / Journal of ASTM International (JAI) / Table of Contents

2006 Volume 3, Issue 4 (April 2006)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Dynamic Modulus Testing of Thin Pavement Cores
Pellinen T., Xiao S., Raval S.
Page Count: 14
Published: 01 April 2006
Abstract
Download PDF PDF (208K)
Paper ID: JAI12258
DOI: 10.1520/JAI12258

Microstructure Evolution in ZrC Irradiated with Kr ions
Gan J., Meyer M., Birtcher R., Allen T.
Page Count: 7
Published: 01 April 2006
Abstract
Download PDF PDF (240K)
Paper ID: JAI12376
DOI: 10.1520/JAI12376

Review of Specific Local Fenestration Units, Building Envelope Interface Practices, and Materials Compared to ASTM E 2112, Current Acceptance Criteria, and Evaluation Practices
Ackerman D.
Page Count: 19
Published: 01 April 2006
Abstract
Download PDF PDF (900K)
Paper ID: JAI12487
DOI: 10.1520/JAI12487

Impact Fracture Behavior of Hollow Glass Bead-Filled ABS Composites
Liang J.
Page Count: 7
Published: 01 April 2006
Abstract
Download PDF PDF (248K)
Paper ID: JAI12509
DOI: 10.1520/JAI12509

Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions
Kingston E., Stefanescu D., Mahmoudi A., Truman C., Smith D.
Page Count: 12
Published: 01 April 2006
Abstract
Download PDF PDF (316K)
Paper ID: JAI12568
DOI: 10.1520/JAI12568

Full-field Laser Shearography Instrumentation for the Detection and Characterization of Fatigue Cracks in Titanium 10-2-3
Groves R., Furfari D., Barnes S., James S., Fu S., Irving P., Tatam R.
Page Count: 13
Published: 01 April 2006
Abstract
Download PDF PDF (244K)
Paper ID: JAI12757
DOI: 10.1520/JAI12757

The Development of Procedures for Charpy Impact Testing
Siewert T., McCowan C.
Page Count: 10
Published: 01 April 2006
Abstract
Download PDF PDF (84K)
Paper ID: JAI12868
DOI: 10.1520/JAI12868

International Standards for Blast Resistant Glazing
Johnson N.
Page Count: 16
Published: 01 April 2006
Abstract
Download PDF PDF (640K)
Paper ID: JAI12892
DOI: 10.1520/JAI12892

Twelve Common Deficiencies Found during Firestopping Inspections
Valiulis J., Phillips S.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (52K)
Paper ID: JAI13027
DOI: 10.1520/JAI13027

Analysis of Surface Inertial Profiles Measured on Jointed Portland Cement Pavements
Gagarin N., Mekemson J.
Page Count: 12
Published: 01 April 2006
Abstract
Download PDF PDF (804K)
Paper ID: JAI13047
DOI: 10.1520/JAI13047

Relationship Between Paste Volume and Cementitious Materials Content in Hardened Concrete
Cong D.
Page Count: 9
Published: 01 April 2006
Abstract
Download PDF PDF (196K)
Paper ID: JAI13057
DOI: 10.1520/JAI13057

Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Fine Thread Bolts for Multiple Preload Conditions
Bradley N., Stephens R., Horn N., Gradman J., Arkema J., Borgwardt C.
Page Count: 15
Published: 01 April 2006
Abstract
Download PDF PDF (316K)
Paper ID: JAI13069
DOI: 10.1520/JAI13069

Fatigue Strength in Presence of Inhomogeneities: Influence of Constraint
Beretta S., Carboni M., Madia M.
Page Count: 11
Published: 01 April 2006
Abstract
Download PDF PDF (348K)
Paper ID: JAI13199
DOI: 10.1520/JAI13199

Experimental Evaluation of the J or C^* Parameter for a Range of Cracked Geometries
Davies C., Kourmpetis M., O'Dowd N., Nikbin K.
Page Count: 20
Published: 01 April 2006
Abstract
Download PDF PDF (272K)
Paper ID: JAI13221
DOI: 10.1520/JAI13221

The Role of Applied Potential on Environment-Assisted Cracking of Zirconium Alloys
Roy A., Valliyil U., Govindaraj E.
Page Count: 11
Published: 01 April 2006
Abstract
Download PDF PDF (264K)
Paper ID: JAI13231
DOI: 10.1520/JAI13231

The Effect of Large Strain Cycling on the Fatigue Strength of Welded Joint
Okuya K., Kondo Y.
Page Count: 11
Published: 01 April 2006
Abstract
Download PDF PDF (200K)
Paper ID: JAI13232
DOI: 10.1520/JAI13232

Distribution and Ecology of Dreissena Polymorpha (Pallas) and Dreissena Bugensis (Andrusov) in the Upper Volga Basin
Shcherbina G., Buckler D.
Page Count: 11
Published: 01 April 2006
Abstract
Download PDF PDF (80K)
Paper ID: JAI13256
DOI: 10.1520/JAI13256

Parameters in Ultrasonic Cleaning for Implants and Other Critical Devices
Kanegsberg B., Kanegsberg E.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (172K)
Paper ID: JAI13387
DOI: 10.1520/JAI13387

Reducing Modulus of Sealants to Improve Durability
Klosowski J., Plott J.
Page Count: 6
Published: 01 April 2006
Abstract
Download PDF PDF (260K)
Paper ID: JAI13415
DOI: 10.1520/JAI13415

A Logical Pozzolanic Index and Its Use in Concrete Proportioning
Dunstan E., A Z.
Page Count: 12
Published: 01 April 2006
Abstract
Download PDF PDF (148K)
Paper ID: JAI13416
DOI: 10.1520/JAI13416

Reactor Dosimetry Issues During Justification of Extension of Service Life of Nonrestorable Equipment of Russian VVER
Borodkin G., Khrennikov N., Dmitriev A., Miroshnichenko M., Grivizirsky V.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (152K)
Paper ID: JAI13441
DOI: 10.1520/JAI13441

Retrospective Measurement of Neutron Activation within the Pressure Circuit Steelwork of a Magnox Reactor and Comparison with Prediction
Thornton D., Thiruarooran C., Allen D., Harris A., Holmes C., Harvey C.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (176K)
Paper ID: JAI13451
DOI: 10.1520/JAI13451

Deterministic and Monte Carlo Neutron Transport Calculation for Greifswald-1 and Comparison with Ex-vessel Measured Data
Borodkin G., Khrennikov N., Böhmer B., Noack K., Konheiser J.
Page Count: 7
Published: 01 April 2006
Abstract
Download PDF PDF (96K)
Paper ID: JAI13460
DOI: 10.1520/JAI13460

The Neutron Spectrum of NBS-1
Heimbach C.
Page Count: 7
Published: 01 April 2006
Abstract
Download PDF PDF (208K)
Paper ID: JAI13474
DOI: 10.1520/JAI13474

Sensitivity Analysis and Neutron Fluence Adjustment for VVER-440 RPV
Belousov S., Ilieva K., Matushko V.
Page Count: 7
Published: 01 April 2006
Abstract
Download PDF PDF (72K)
Paper ID: JAI13489
DOI: 10.1520/JAI13489

Oxidation Fundamentals and Its Application to Turbine Oil Testing
Gatto V., Moehle W., Cobb T., Schneller E.
Page Count: 20
Published: 01 April 2006
Abstract
Download PDF PDF (536K)
Paper ID: JAI13498
DOI: 10.1520/JAI13498

Mechanical Characterization of Cryogenically Treated Music Wire
Chen J., Seah K., Chew C.
Page Count: 16
Published: 01 April 2006
Abstract
Download PDF PDF (380K)
Paper ID: JAI13510
DOI: 10.1520/JAI13510

Promoted Combustion Testing of Pure and Ceramic-Coated Metals in High Pressure Oxygen by the Federal Institute of Materials Research and Testing (BAM)
Binder C., Kasch T., Brock T., Beck U., Weise M., Share M.
Page Count: 6
Published: 01 April 2006
Abstract
Download PDF PDF (120K)
Paper ID: JAI13533
DOI: 10.1520/JAI13533

Promoted Ignition of a Cylinder Valve in NF₃
Chiffoleau G., Newton B., Chou T., Wilson B.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (236K)
Paper ID: JAI13535
DOI: 10.1520/JAI13535

Filtration of Gaseous or Liquid Oxygen in Industrial Applications and Associated Fire Risks
Colson A., Fano E.
Page Count: 13
Published: 01 April 2006
Abstract
Download PDF PDF (320K)
Paper ID: JAI13537
DOI: 10.1520/JAI13537

Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft
Hay P., Burns D., Steinberg T.
Page Count: 13
Published: 01 April 2006
Abstract
Download PDF PDF (180K)
Paper ID: JAI13544
DOI: 10.1520/JAI13544

Effect of Sample Geometry on Regression Rate of the Melting Interface for Carbon Steel Burned in Oxygen
Suvorovs T., Ward N., Wilson R., Steinberg T.
Page Count: 9
Published: 01 April 2006
Abstract
Download PDF PDF (100K)
Paper ID: JAI13565
DOI: 10.1520/JAI13565

An Investigation of Regression Rate of the Melting Interface for Iron Burning in Normal Gravity and Reduced Gravity
Ward N., Suvorovs T., Steinberg T.
Page Count: 12
Published: 01 April 2006
Abstract
Download PDF PDF (248K)
Paper ID: JAI13569
DOI: 10.1520/JAI13569

The Adiabatic Compression Test for Type Approval of Components — History and Final Test Protocol
Barthélémy H.
Page Count: 9
Published: 01 April 2006
Abstract
Download PDF PDF (192K)
Paper ID: JAI13571
DOI: 10.1520/JAI13571

The Oxygen Index of Surgical Drape Materials
Serrao G., Micou M., Sidebotham G., Wolf G.
Page Count: 5
Published: 01 April 2006
Abstract
Download PDF PDF (92K)
Paper ID: JAI13574
DOI: 10.1520/JAI13574

A Thermal Analysis Method for Measuring Polymer Flammability
Lyon R., Walters R., Stoliarov S.
Page Count: 18
Published: 01 April 2006
Abstract
Download PDF PDF (352K)
Paper ID: JAI13895
DOI: 10.1520/JAI13895

A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels
Hénault E.
Page Count: 10
Published: 01 April 2006
Abstract
Download PDF PDF (104K)
Paper ID: JAI14032
DOI: 10.1520/JAI14032

Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications
Streit E., Brock J., Poulin P.
Page Count: 9
Published: 01 April 2006
Abstract
Download PDF PDF (456K)
Paper ID: JAI14049
DOI: 10.1520/JAI14049

Surface Texture Analysis of Artificial Disks Wear-Tested under Different Conditions and Comparison to a Retrieved Implant
Pare P., Chan F., Buchholz P., Kurtz S., McCombe P.
Page Count: 8
Published: 01 April 2006
Abstract
Download PDF PDF (216K)
Paper ID: JAI14173
DOI: 10.1520/JAI14173

Head Injury in Snowboarding: Evaluating the Protective Role of Helmets
Scher I., Scher I., Richards D., Carhart M., Carhart M.
Page Count: 9
Published: 01 April 2006
Abstract
Download PDF PDF (200K)
Paper ID: JAI14203
DOI: 10.1520/JAI14203