SEDL / Journal of ASTM International (JAI) / Table of Contents


2006
Volume 3, Issue 2 (February 2006)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


Electrochemical Impedance Spectroscopy as a Tool for Studying Steel Corrosion Inhibition in Simulated Concrete Environments—Red Mud Used as Rebar Corrosion Inhibitor
Collazo A., Cristóbal M., Nóvoa X., Pena G., Pérez M.
Page Count: 10
Published: 01 February 2006
Abstract
Download PDF PDF (156K)
Paper ID: JAI11785
DOI: 10.1520/JAI11785


A Numerical Method for the Recovery of Local Potentials and Currents Due to Corrosion of Steel in Concrete
Kranc S., Sagüés A.
Page Count: 11
Published: 01 February 2006
Abstract
Download PDF PDF (140K)
Paper ID: JAI11788
DOI: 10.1520/JAI11788


Service Life Extension of Virginia Bridge Decks Afforded by Epoxy-Coated Reinforcement
Brown M., Weyers R., Sprinkel M.
Page Count: 13
Published: 01 February 2006
Abstract
Download PDF PDF (156K)
Paper ID: JAI11793
DOI: 10.1520/JAI11793


Use of Electrochemical Techniques to Assess Performance of Corrosion Protection Systems for Reinforced Concrete Structures—A Review
Islam M., Daily S.
Page Count: 12
Published: 01 February 2006
Abstract
Download PDF PDF (288K)
Paper ID: JAI11797
DOI: 10.1520/JAI11797


Low Strain-Rate Microstructural Deformation Behavior in 316 Stainless Steel Irradiated in EBR-II
Cole J., Allen T., Tsai H., Yoshitake T., Yamagata I., Akasaka N., Nakamura Y.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (300K)
Paper ID: JAI12400
DOI: 10.1520/JAI12400


Mechanical Property Changes in Reactor Vessel Materials Thermally Aged for 209 000 H at 260°C
Gunawardane H., Hall J., Rosinski S.
Page Count: 9
Published: 00 February 2006
Abstract
Download PDF PDF (196K)
Paper ID: JAI12430
DOI: 10.1520/JAI12430


Use of Broken Charpy V-notch Specimens from a Surveillance Program for Fracture Toughness Determination
Scibetta M., Lucon E., Chaouadi R., van Walle E., Gérard R.
Page Count: 7
Published: 01 February 2006
Abstract
Download PDF PDF (72K)
Paper ID: JAI12450
DOI: 10.1520/JAI12450


The Effect of Joint Condition on Mechanical Properties of Irradiated Hot Isostatic Pressed Joints
Yamada H., Sato S., Kawamura H., Mohri K., Nagao Y., Takada F.
Page Count: 7
Published: 01 February 2006
Abstract
Download PDF PDF (328K)
Paper ID: JAI12482
DOI: 10.1520/JAI12482


An Integrated Approach to the Determination and Consequences of Residual Stress on the Fatigue Performance of Welded Aircraft Structures
Edwards L., Fitzpatrick M., Irving P., Sinclair I., Zhang X., Yapp D.
Page Count: 17
Published: 01 February 2006
Abstract
Download PDF PDF (436K)
Paper ID: JAI12547
DOI: 10.1520/JAI12547


Smoke Toxicity Data for Fire Hazard and Risk Assessment of Cable Products
Gann R., Peacock R., Averill J., Nyden M.
Page Count: 5
Published: 01 February 2006
Abstract
Download PDF PDF (40K)
Paper ID: JAI12852
DOI: 10.1520/JAI12852


The History of Instrumented Impact Testing
Manahan M., Siewert T.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (192K)
Paper ID: JAI12867
DOI: 10.1520/JAI12867


International Comparison of Impact Reference Materials (2004)
McCowan C., Roebben G., Yamaguchi Y., Lefrançois S., Splett J., Takagi S., Lamberty A.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (192K)
Paper ID: JAI12869
DOI: 10.1520/JAI12869


Development of a Dry Applied Dispersible Granular Pesticide Carrier
Anderson C., Birthisel T., Lynch J.
Page Count: 5
Published: 01 February 2006
Abstract
Download PDF PDF (132K)
Paper ID: JAI12909
DOI: 10.1520/JAI12909


Use of Carbodiimides as Stabilizing Agents to Deliver Water—Labile Active Ingredients in Liquid Systems Including Aqueous Medium—Amitraz as a Case Study
Narayanan K., Jon D., Beestman G.
Page Count: 7
Published: 01 February 2006
Abstract
Download PDF PDF (68K)
Paper ID: JAI12912
DOI: 10.1520/JAI12912


Relationship Between Indentation Hardness and Water to Cement Ratio of Hardened Mortar and Concrete
Cong D., Reed M., Powers L., Shotwell B., Brown B.
Page Count: 7
Published: 01 February 2006
Abstract
Download PDF PDF (188K)
Paper ID: JAI13060
DOI: 10.1520/JAI13060


Standards Development for Impermeable, Constructible, and Durable Waterproofing
Strong J., Kovach J., Eng V.
Page Count: 19
Published: 01 February 2006
Abstract
Download PDF PDF (552K)
Paper ID: JAI13117
DOI: 10.1520/JAI13117


Simulation on the Decrease in Threshold Stress Intensity Factor (SIF) Range due to High Maximum SIF
Meshii T., Ishihara K., Asakura T.
Page Count: 10
Published: 01 February 2006
Abstract
Download PDF PDF (160K)
Paper ID: JAI13195
DOI: 10.1520/JAI13195


Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels
Davies C., Mueller F., Nikbin K., O'Dowd N., Webster G.
Page Count: 20
Published: 01 February 2006
Abstract
Download PDF PDF (264K)
Paper ID: JAI13220
DOI: 10.1520/JAI13220


European Code of Practice for Creep Crack Initiation and Growth Testing of Industrially Relevant Specimens
Dogan B., Ceyhan U., Nikbin K., Petrovski B., Dean D.
Page Count: 20
Published: 01 February 2006
Abstract
Download PDF PDF (196K)
Paper ID: JAI13223
DOI: 10.1520/JAI13223


Prediction of Scatter in Creep Crack Growth Data from Creep Failure Strain Properties
Wasmer K., Nikbin K., Webster G.
Page Count: 13
Published: 01 February 2006
Abstract
Download PDF PDF (280K)
Paper ID: JAI13227
DOI: 10.1520/JAI13227


Trends in High Temperature Structural Integrity Assessment
Webster G.
Page Count: 18
Published: 01 February 2006
Abstract
Download PDF PDF (216K)
Paper ID: JAI13229
DOI: 10.1520/JAI13229


Methodology for Determination of Hygroscopic Moisture Content of Soils
Shah P., Singh D.
Page Count: 14
Published: 01 February 2006
Abstract
Download PDF PDF (144K)
Paper ID: JAI13376
DOI: 10.1520/JAI13376


ASTM Activities for Assessing Cleanliness of Medical Devices
Spiegelberg S.
Page Count: 4
Published: 01 February 2006
Abstract
Download PDF PDF (28K)
Paper ID: JAI13389
DOI: 10.1520/JAI13389


Cleanliness Testing and Identification of Residues on Polymer Medical Devices
Zurbrügg D.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (104K)
Paper ID: JAI13391
DOI: 10.1520/JAI13391


Reactor Dosimetry with Niobium
Wagemans J., Borms L., Willekens M., Oeyen J., Moens A., Kochkin V.
Page Count: 8
Published: 01 February 2006
Abstract
Download PDF PDF (60K)
Paper ID: JAI13439
DOI: 10.1520/JAI13439


Gas Production in Reactor Materials
Greenwood L.
Page Count: 6
Published: 01 February 2006
Abstract
Download PDF PDF (100K)
Paper ID: JAI13485
DOI: 10.1520/JAI13485


Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry
Ceschini L., Lanzoni E., Sambogna G., Bordiga V., Schild T.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (184K)
Paper ID: JAI13884
DOI: 10.1520/JAI13884


The Case for a Voluntary National Healthcare Identifier
Hieb B.
Page Count: 12
Published: 01 February 2006
Abstract
Download PDF PDF (124K)
Paper ID: JAI13891
DOI: 10.1520/JAI13891


The Challenge of Multiple Particles in Extreme Value Inclusion Rating
Beretta S., Anderson C.
Page Count: 8
Published: 01 February 2006
Abstract
Download PDF PDF (128K)
Paper ID: JAI14041
DOI: 10.1520/JAI14041


A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
Matsubara Y., Hamada H.
Page Count: 13
Published: 01 February 2006
Abstract
Download PDF PDF (384K)
Paper ID: JAI14048
DOI: 10.1520/JAI14048


Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents
Vincent A., Nelias D., Jacq C., Robin Y., Dudragne G.
Page Count: 11
Published: 01 February 2006
Abstract
Download PDF PDF (276K)
Paper ID: JAI14051
DOI: 10.1520/JAI14051


Continued Developments in Easily Carburizable High Speed Steel Alloys
Hetzner D.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (460K)
Paper ID: JAI14052
DOI: 10.1520/JAI14052


Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
Peissl S., Leitner H., Ebner R., Hutter H., Krecar D., Rabitsch R.
Page Count: 10
Published: 01 February 2006
Abstract
Download PDF PDF (420K)
Paper ID: JAI14055
DOI: 10.1520/JAI14055


Radioactivity Inspections Applied to the Steelmaking Industry
Buoro S., Giurgevich M.
Page Count: 6
Published: 01 February 2006
Abstract
Download PDF PDF (144K)
Paper ID: JAI14106
DOI: 10.1520/JAI14106


Reduce the Injuries, Change the Culture: Insights from Telemarking
Dickson T.
Page Count: 9
Published: 01 February 2006
Abstract
Download PDF PDF (148K)
Paper ID: JAI14138
DOI: 10.1520/JAI14138