SEDL / Journal of ASTM International (JAI) / Table of Contents


2006
Volume 3, Issue 1 (January 2006)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


Crystalline Silica Analysis: A Comparison of Calibration Materials and Recent Coal Mine Dust Size Distributions
Page S.
Page Count: 14
Published: 01 January 2006
Abstract
Download PDF PDF (72K)
Paper ID: JAI12236
DOI: 10.1520/JAI12236


Modeling of the Simultaneous Evolution of Vacancy and Interstitial Dislocation Loops in hcp Metals Under Irradiation
Dubinko V., Turkin A., Abyzov A., Griffiths M.
Page Count: 18
Published: 01 January 2006
Abstract
Download PDF PDF (776K)
Paper ID: JAI12323
DOI: 10.1520/JAI12323


Phase Composition, Structure, and Plastic Deformation Localization in Zr1%Nb alloys
Zuev L., Zavodchikov S., Poletika T., Cheremnykh G., Filippov V., Belov V., Arzhakova V., Bocharov O., Shikov A.
Page Count: 11
Published: 01 January 2006
Abstract
Download PDF PDF (1.9M)
Paper ID: JAI12336
DOI: 10.1520/JAI12336


Radiation-Induced Stress Relaxation of Welded Type 304 Stainless Steel Evaluated by Neutron Diffraction
Obata M., Root J., Ishiyama Y., Nakata K., Sakamoto H., Anzai H., Asano K.
Page Count: 17
Published: 01 January 2006
Abstract
Download PDF PDF (296K)
Paper ID: JAI12348
DOI: 10.1520/JAI12348


Effect of Alloying Elements and Impurities on in-BWR Corrosion of Zirconium Alloys
Sell H., Trapp-Pritsching S., Garzarolli F.
Page Count: 14
Published: 01 January 2006
Abstract
Download PDF PDF (1.6M)
Paper ID: JAI12372
DOI: 10.1520/JAI12372


Comparison of the High Burn-Up Corrosion on M5 and Low Tin Zircaloy-4
Bossis P., Pêcheur D., Hanifi K., Thomazet J., Blat M.
Page Count: 32
Published: 01 January 2006
Abstract
Download PDF PDF (9.8M)
Paper ID: JAI12404
DOI: 10.1520/JAI12404


Thermal Creep of Irradiated Zircaloy Cladding
Tsai H., Billone M.
Page Count: 16
Published: 01 January 2006
Abstract
Download PDF PDF (4.8M)
Paper ID: JAI12425
DOI: 10.1520/JAI12425


Flow Localization Processes in Austenitic Alloys
Wu X., Pan X., Li M., Stubbins J.
Page Count: 14
Published: 01 January 2006
Abstract
Download PDF PDF (3.0M)
Paper ID: JAI12458
DOI: 10.1520/JAI12458


Performance Testing of Flashing Installation Methods for Brick Mold and Nonflanged Windows
Crowder-Moore B., Weston T., Katsaros J.
Page Count: 20
Published: 01 January 2006
Abstract
Download PDF PDF (356K)
Paper ID: JAI12490
DOI: 10.1520/JAI12490


Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions
Horn N., Stephens R.
Page Count: 21
Published: 01 January 2006
Abstract
Download PDF PDF (768K)
Paper ID: JAI12551
DOI: 10.1520/JAI12551


Zirconium and Niobium Affect Human Osteoblasts, Fibroblasts, and Lymphocytes in a Similar Manner to More Traditional Implant Alloy Metals
Hallab N., Anderson S., Caicedo M., Jacobs J.
Page Count: 12
Published: 01 January 2006
Abstract
Download PDF PDF (412K)
Paper ID: JAI12817
DOI: 10.1520/JAI12817


Enhanced Recovery and Real-Time PCR Based Quantification of Mycobacteria from Metalworking Fluids
Yadav J., Selvaraju S., Khan I.
Page Count: 18
Published: 01 January 2006
Abstract
Download PDF PDF (332K)
Paper ID: JAI12839
DOI: 10.1520/JAI12839


Field-Collected and AGDISP-Predicted Spray Flux from an Aerial Application
Hoffmann W.
Page Count: 12
Published: 01 January 2006
Abstract
Download PDF PDF (236K)
Paper ID: JAI12908
DOI: 10.1520/JAI12908


Suitable Adjuvant to Maximize Trifloxysulfuron Efficacy and Early Assessment of Herbicide Efficacy Using Chlorophyll Fluorescence
Singh S., Singh M.
Page Count: 12
Published: 01 January 2006
Abstract
Download PDF PDF (116K)
Paper ID: JAI12913
DOI: 10.1520/JAI12913


Surfactant-Enhanced Release of Permethrin from a Cellulosic Granular Carrier
Stern A.
Page Count: 6
Published: 01 January 2006
Abstract
Download PDF PDF (80K)
Paper ID: JAI12918
DOI: 10.1520/JAI12918


Flight Line Variability in Rotary Atomizer Drop Size Distribution
Teske M., Thistle H., Reardon R., Davies D., Cormier G., Cameron R., LeClerc M., Karipot A.
Page Count: 9
Published: 01 January 2006
Abstract
Download PDF PDF (264K)
Paper ID: JAI12922
DOI: 10.1520/JAI12922


Analysis of Fuels, Lubricants, and Greases Using X-ray Fluorescence Spectrometry
Wolska J., Vrebos B., Brouwer P.
Page Count: 10
Published: 01 January 2006
Abstract
Download PDF PDF (680K)
Paper ID: JAI12972
DOI: 10.1520/JAI12972


Mercury Measurements in Fossil Fuels, Particularly Petrochemicals
Stockwell P., Corns W., ryce D.
Page Count: 12
Published: 01 January 2006
Abstract
Download PDF PDF (600K)
Paper ID: JAI12988
DOI: 10.1520/JAI12988


Opportunities for Standardization of Beryllium Sampling and Analysis
Brisson M., Ekechukwu A., Ashley K., Jahn S.
Page Count: 12
Published: 01 January 2006
Abstract
Download PDF PDF (204K)
Paper ID: JAI13157
DOI: 10.1520/JAI13157


Sampling and Analysis of Beryllium at JET: Policy Cost and Impact
Campling D., Patel B.
Page Count: 10
Published: 01 January 2006
Abstract
Download PDF PDF (52K)
Paper ID: JAI13158
DOI: 10.1520/JAI13158


Opportunities for Development of Reference Materials for Beryllium
Watters R., Hoover M., Day G., Stefaniak A.
Page Count: 18
Published: 01 January 2006
Abstract
Download PDF PDF (276K)
Paper ID: JAI13171
DOI: 10.1520/JAI13171


Use of Electrically Enhanced Aerosol Plasma Spectroscopy for Real-Time Characterization of Beryllium Particles
Chen M., Smithwick R., Hinton R.
Page Count: 11
Published: 01 January 2006
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI13172
DOI: 10.1520/JAI13172


Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces
Lawrence T., Boyajian D.
Page Count: 16
Published: 01 January 2006
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI13188
DOI: 10.1520/JAI13188


Temperature Dependence and Variability of Fracture Toughness in the Transition Regime for A508 Grade 4N Pressure Vessel Steel
Leax T.
Page Count: 20
Published: 01 January 2006
Abstract
Download PDF PDF (1004K)
Paper ID: JAI13230
DOI: 10.1520/JAI13230


Use of Miniaturized Compact Tension Specimens for Fracture Toughness Measurements in the Upper Shelf Regime
Lucon E., Scibetta M., Chaouadi R., van Walle E.
Page Count: 16
Published: 01 January 2006
Abstract
Download PDF PDF (2.5M)
Paper ID: JAI13235
DOI: 10.1520/JAI13235


Analysis of Dynamic Fracture and Crack Arrest of an HSLA Steel in an SE(T) Specimen
Link R.
Page Count: 26
Published: 01 January 2006
Abstract
Download PDF PDF (1.9M)
Paper ID: JAI13236
DOI: 10.1520/JAI13236


Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation
Kim W., Yoon S., Ryu W., Kim S., Yi W.
Page Count: 10
Published: 01 January 2006
Abstract
Download PDF PDF (300K)
Paper ID: JAI13375
DOI: 10.1520/JAI13375


Modelling the Redistribution of Residual Stresses at Elevated Temperature in Components
Lee H., Nikbin K.
Page Count: 15
Published: 01 January 2006
Abstract
Download PDF PDF (608K)
Paper ID: JAI13411
DOI: 10.1520/JAI13411