SEDL / Journal of ASTM International (JAI) / Table of Contents


2005
Volume 2, Issue 2 (February 2005)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


Effects of Vacuum Processing on Strength and Surface Hardness Properties of Concrete
Şimşek O.
Page Count: 8
Published: 01 February 2005
Abstract
Download PDF PDF (316K)
Paper ID: JAI11870
DOI: 10.1520/JAI11870


Winter Sports in an Indoor Facility—Accident and Injury Trends
Richter S., Jendrusch G., Henke H., Hermichen H., Heck H.
Page Count: 9
Published: 01 February 2005
Abstract
Download PDF PDF (308K)
Paper ID: JAI11969
DOI: 10.1520/JAI11969


Evaluating the Physiological Performance of a Liquid Cooling Garment Used to Control Heat Stress in Hazmat Protective Ensembles
Semeniuk K., Dionne J., Makris A., Bernard T., Ashley C., Medina T.
Page Count: 9
Published: 01 February 2005
Abstract
Download PDF PDF (268K)
Paper ID: JAI12103
DOI: 10.1520/JAI12103


Development of a Prototype Personal Cooling System for First Responders: User Feedback
Branson D., Farr C., Peksoz S., Nam J., Cao H.
Page Count: 11
Published: 01 February 2005
Abstract
Download PDF PDF (292K)
Paper ID: JAI12105
DOI: 10.1520/JAI12105


Comparison of Methods Used to Predict the Burn Injuries in Tests of Thermal Protective Fabrics
Song G., Barker R., Grimes D., Thompson D.
Page Count: 10
Published: 01 February 2005
Abstract
Download PDF PDF (332K)
Paper ID: JAI12117
DOI: 10.1520/JAI12117


Novel Approach to Soldier Flame Protection
Winterhalter C., Lomba R., Tucker D., Martin O.
Page Count: 8
Published: 01 February 2005
Abstract
Download PDF PDF (176K)
Paper ID: JAI12118
DOI: 10.1520/JAI12118


Silica Sampling and Analysis: Legal Issues Evolving from Regulatory Standards and the Role of ASTM E 1132
Abrams A.
Page Count: 16
Published: 01 February 2005
Abstract
Download PDF PDF (236K)
Paper ID: JAI12246
DOI: 10.1520/JAI12246


Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part I: Observed Variations
Chan C., Hover K., Folliard K.
Page Count: 17
Published: 01 February 2005
Abstract
Download PDF PDF (1.3M)
Paper ID: JAI12292
DOI: 10.1520/JAI12292


Creep-Fatigue Behavior in High Strength Copper Alloys
Li M., Stubbins J.
Page Count: 14
Published: 01 February 2005
Abstract
Download PDF PDF (544K)
Paper ID: JAI12380
DOI: 10.1520/JAI12380


Influence of Long Service Exposures on the Thermal-Mechanical Behavior of Zy-4 and M5™ Alloys in LOCA Conditions
Portier L., Bredel T., Brachet J., Maillot V., Mardon J., Lesbros A.
Page Count: 24
Published: 01 February 2005
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI12468
DOI: 10.1520/JAI12468


Effects of C3A and Mineral Admixtures on the Sulfate Attack Using ASTM C 1012
Ahn N.
Page Count: 20
Published: 01 February 2005
Abstract
Download PDF PDF (304K)
Paper ID: JAI12472
DOI: 10.1520/JAI12472


Hydration Behavior of Portland Cements with Different Hemihydrate/Gypsum Ratios in the Presence of Common Chemical Admixtures
Farrington S., Christensen B.
Page Count: 12
Published: 01 February 2005
Abstract
Download PDF PDF (224K)
Paper ID: JAI12478
DOI: 10.1520/JAI12478


Differentiation of Damage and Failure Mechanisms of Co-Cured Fiber-Reinforced Composite Joints Using Acoustic Emission
Cao C., Stefan Dancila D.
Page Count: 24
Published: 01 February 2005
Abstract
Download PDF PDF (444K)
Paper ID: JAI12772
DOI: 10.1520/JAI12772


Steel Superstrengthening Phenomenon
Kobasko N.
Page Count: 13
Published: 01 February 2005
Abstract
Download PDF PDF (724K)
Paper ID: JAI12824
DOI: 10.1520/JAI12824


Rheological 3-D Modeling of Scuffing for the EP-Additive Condition
Escobar Jaramillo E., Escobar López C.
Page Count: 24
Published: 01 February 2005
Abstract
Download PDF PDF (412K)
Paper ID: JAI12828
DOI: 10.1520/JAI12828


Tensile, Flexural, and Shear Properties of Neutron Irradiated SiC/SiC Composites with Different Fiber-Matrix Interfaces
Nozawa T., Ozawa K., Kondo S., Hinoki T., Katoh Y., Snead L., Kohyama A.
Page Count: 13
Published: 01 February 2005
Abstract
Download PDF PDF (440K)
Paper ID: JAI12884
DOI: 10.1520/JAI12884


Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part II: Sampling Considerations for Absorption Tests
Chan C., Hover K., Folliard K.
Page Count: 18
Published: 01 February 2005
Abstract
Download PDF PDF (360K)
Paper ID: JAI12939
DOI: 10.1520/JAI12939


ZIRLO™ — An Alloy Development Success
Sabol G.
Page Count: 22
Published: 01 February 2005
Abstract
Download PDF PDF (884K)
Paper ID: JAI12942
DOI: 10.1520/JAI12942


Ultrathin Films to Modify Mechanical and Tribological Behavior of MEMS Components
Rymuza Z.
Page Count: 16
Published: 01 February 2005
Abstract
Download PDF PDF (436K)
Paper ID: JAI12963
DOI: 10.1520/JAI12963


Zen and the Art (or Is It Science) of a Perfect Analysis
Nadkarni R.
Page Count: 13
Published: 01 February 2005
Abstract
Download PDF PDF (228K)
Paper ID: JAI12964
DOI: 10.1520/JAI12964


Trace Levels of Sulfur in the Fuels of the Future: Analytical Perspective
Nadkarni R.
Page Count: 13
Published: 01 February 2005
Abstract
Download PDF PDF (212K)
Paper ID: JAI12978
DOI: 10.1520/JAI12978


Sliding Wear Characteristics of Materials in Artificial Seawater
Kawazoe T., Okumura T., Morohoshi S., Sada H.
Page Count: 8
Published: 01 February 2005
Abstract
Download PDF PDF (660K)
Paper ID: JAI13051
DOI: 10.1520/JAI13051