SEDL / Journal of ASTM International (JAI) / Table of Contents


2005
Volume 2, Issue 1 (January 2005)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


Flexible Crumb Tire Rubber-Filled Cement Mortars as a Protective System for Buried Infrastructure
Nehdi M., Khan A., Sumner J.
Page Count: 15
Published: 01 January 2005
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI10933
DOI: 10.1520/JAI10933


The Role of Friction in Post-Crack Energy Absorption of Fiber Reinforced Concrete in the Round Panel Test
Bernard E.
Page Count: 12
Published: 01 January 2005
Abstract
Download PDF PDF (412K)
Paper ID: JAI11771
DOI: 10.1520/JAI11771


Contrast Enhancing Filters in Ski Sports
Lingelbach B., Jendrusch G.
Page Count: 8
Published: 01 January 2005
Abstract
Download PDF PDF (712K)
Paper ID: JAI11972
DOI: 10.1520/JAI11972


Evaluation of the Effect of Crack Tip Constraint on Fatigue Crack Growth Rate in Inconel 718
Joyce J.
Page Count: 18
Published: 01 January 2005
Abstract
Download PDF PDF (6.8M)
Paper ID: JAI11991
DOI: 10.1520/JAI11991


Effect of Periodic Overloads on Threshold Fatigue Crack Growth in Al-Alloys
Sunder R.
Page Count: 16
Published: 01 January 2005
Abstract
Download PDF PDF (1.7M)
Paper ID: JAI12004
DOI: 10.1520/JAI12004


Evaluation of the Effect of Biaxial Loading on the To Reference Temperature Using a Cruciform Specimen Geometry
Joyce J., Link R., Gaies J.
Page Count: 18
Published: 01 January 2005
Abstract
Download PDF PDF (1004K)
Paper ID: JAI12022
DOI: 10.1520/JAI12022


Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth
Forth S., Herman D., James M., Johnston W.
Page Count: 14
Published: 01 January 2005
Abstract
Download PDF PDF (320K)
Paper ID: JAI12026
DOI: 10.1520/JAI12026


Sensitivity of Creep Crack Initiation and Growth in Plates to Material Properties Variations
Wasmer K., Nikbin K., Webster G.
Page Count: 15
Published: 01 January 2005
Abstract
Download PDF PDF (368K)
Paper ID: JAI12030
DOI: 10.1520/JAI12030


Microstructural Influences on the Development and Growth of Small Fatigue Cracks in the Near Threshold Regime
Schneider J., Kenik E.
Page Count: 11
Published: 01 January 2005
Abstract
Download PDF PDF (1.4M)
Paper ID: JAI12050
DOI: 10.1520/JAI12050


Development of a Cooling Capability Test Method for Liquid-Cooled Textile System
Cao H., Branson D., Nam J., Peksoz S., Farr C.
Page Count: 10
Published: 01 January 2005
Abstract
Download PDF PDF (236K)
Paper ID: JAI12100
DOI: 10.1520/JAI12100


Effects of Thermal Properties on Skin Burn Predictions in Longer Duration Protective Clothing Tests
Torvi D.
Page Count: 13
Published: 01 January 2005
Abstract
Download PDF PDF (252K)
Paper ID: JAI12115
DOI: 10.1520/JAI12115


Simplified Thermal Analysis of Asynchronous Machine
Okoro O.
Page Count: 20
Published: 01 January 2005
Abstract
Download PDF PDF (1.1M)
Paper ID: JAI12154
DOI: 10.1520/JAI12154


Density Compensation of TDR Calibration for Geotechnical Applications
Yu X., Drnevich V.
Page Count: 16
Published: 01 January 2005
Abstract
Download PDF PDF (324K)
Paper ID: JAI12190
DOI: 10.1520/JAI12190


The Correlation Between Microstructures and in-BWR Corrosion Behavior of Highly Irradiated Zr-based Alloys
Takagawa Y., Ishimoto S., Etoh Y., Kubo T., Ogata K., Kubota O.
Page Count: 16
Published: 01 January 2005
Abstract
Download PDF PDF (2.0M)
Paper ID: JAI12357
DOI: 10.1520/JAI12357


Plutonium-238 Alpha-Decay Damage Study of A Glass-Bonded Sodalite Ceramic Waste Form
Frank S., DiSanto T., Goff M., Johnson S., Jue J., Barber T., Noy M., O'Holleran T., Giglio J.
Page Count: 11
Published: 01 January 2005
Abstract
Download PDF PDF (1.1M)
Paper ID: JAI12421
DOI: 10.1520/JAI12421


ASTM C 88 Test on Soundness of Aggregate Using Sodium Sulfate or Magnesium Sulfate: A Study of the Mechanisms of Damage
Haynes H.
Page Count: 17
Published: 01 January 2005
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI12517
DOI: 10.1520/JAI12517


The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 1: Evaluation of Pure Forms
Redman-Furey N., Dicks M., Godlweski J., Vaughn D., Collins W.
Page Count: 10
Published: 01 January 2005
Abstract
Download PDF PDF (388K)
Paper ID: JAI12791
DOI: 10.1520/JAI12791


The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 2: Evaluation of Mixed Forms
Redman-Furey N., Dicks M., Godlweski J., Vaughn D., Collins W.
Page Count: 9
Published: 01 January 2005
Abstract
Download PDF PDF (372K)
Paper ID: JAI12792
DOI: 10.1520/JAI12792


Estimating Unsaturated Hydraulic Conductivity of Fine-Grained Soils Using Electrical Resistivity Measurements
Sreedeep S., Singh D.
Page Count: 11
Published: 01 January 2005
Abstract
Download PDF PDF (264K)
Paper ID: JAI12823
DOI: 10.1520/JAI12823


A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete
Montes F., Valavala S., Haselbach L.
Page Count: 13
Published: 01 January 2005
Abstract
Download PDF PDF (228K)
Paper ID: JAI12931
DOI: 10.1520/JAI12931


Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel
Martins M., Casteletti L.
Page Count: 14
Published: 01 January 2005
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI13037
DOI: 10.1520/JAI13037