Journal of ASTM International (JAI) - 2004

SEDL / Journal of ASTM International (JAI) / Table of Contents

2004
Volume 1, Issue 1 (January 2004)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Transition Toughness Modeling of Steels Since RKR
Kirk M., Natishan M., Wagenhofer M.
Page Count: 17
Published: 01 January 2004
Abstract
Download PDF PDF (460K)
Paper ID: JAI10611
DOI: 10.1520/JAI10611

A Physics-Based Predictive Model for Fracture Toughness Behavior
Natishan M., Wagenhofer M., Rosinski S.
Page Count: 14
Published: 01 January 2004
Abstract
Download PDF PDF (332K)
Paper ID: JAI10614
DOI: 10.1520/JAI10614

Constraint Correction of Fracture Toughness CTOD for Fracture Performance Evaluation of Structural Components
Minami F., Arimochi K.
Page Count: 19
Published: 01 January 2004
Abstract
Download PDF PDF (1.2M)
Paper ID: JAI10615
DOI: 10.1520/JAI10615

On the Identification of Critical Damage Mechanisms Parameters to Predict the Behavior of Charpy Specimens on the Upper Shelf
Poussard C., Sainte Catherine C., Forget P., Marini B.
Page Count: 18
Published: 01 January 2004
Abstract
Download PDF PDF (1.4M)
Paper ID: JAI10617
DOI: 10.1520/JAI10617

Transferability Properties of Local Approach Modeling in the Ductile to Brittle Transition Region
Laukkanen A., Wallin K., Nevasmaa P., Tähtinen S.
Page Count: 26
Published: 01 January 2004
Abstract
Download PDF PDF (740K)
Paper ID: JAI10618
DOI: 10.1520/JAI10618

Interface Strength Evaluation of LSI Devices Using the Weibull Stress
Minami F., Takahara W., Nakamura T.
Page Count: 10
Published: 01 January 2004
Abstract
Download PDF PDF (480K)
Paper ID: JAI10624
DOI: 10.1520/JAI10624

Image-Based Characterization and Finite Element Analysis of Porous SMA Behavior
Qidwai M., DeGiorgi V., Everett R.
Page Count: 13
Published: 01 January 2004
Abstract
Download PDF PDF (656K)
Paper ID: JAI10626
DOI: 10.1520/JAI10626

Computational Estimation of Multiaxial Yield Surface Using Microyield Percolation Analysis
Geltmacher A., Everett R., Matic P., Dyka C.
Page Count: 15
Published: 01 January 2004
Abstract
Download PDF PDF (1.1M)
Paper ID: JAI10628
DOI: 10.1520/JAI10628

Development of a Model for Testing Third Body Wear of UHMWPE Acetabular Components
Bragdon C., O'Connor D., Muratoglu O., Harris W.
Page Count: 7
Published: 01 January 2004
Abstract
Download PDF PDF (172K)
Paper ID: JAI11207
DOI: 10.1520/JAI11207

The Effects of Raw Material, Irradiation Dose, and Irradiation Source on Crosslinking of UHMWPE
Greer K., King R., Chan F.
Page Count: 11
Published: 01 January 2004
Abstract
Download PDF PDF (576K)
Paper ID: JAI11217
DOI: 10.1520/JAI11217

Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature
Villarraga M., Edidin A., Herr M., Kurtz S.
Page Count: 19
Published: 01 January 2004
Abstract
Download PDF PDF (1.8M)
Paper ID: JAI11218
DOI: 10.1520/JAI11218

Measurement of Pore Size and Porosity of Tissue Scaffolds
Tomlins P., Grant P., Mikhalovsky S., James S., Mikhalovska L.
Page Count: 8
Published: 01 January 2004
Abstract
Download PDF PDF (872K)
Paper ID: JAI11510
DOI: 10.1520/JAI11510

Is There a Need for TEMP Standards? A Perspective from a Biomaterials Manufacturer
Dornish M., Dessen A.
Page Count: 13
Published: 01 January 2004
Abstract
Download PDF PDF (808K)
Paper ID: JAI11515
DOI: 10.1520/JAI11515

Biomolecules in Tissue Engineered Medical Products (TEMPs): A Case Study of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2)
Porter T., Rathore S., Rouse J., Denton M.
Page Count: 21
Published: 01 January 2004
Abstract
Download PDF PDF (516K)
Paper ID: JAI11517
DOI: 10.1520/JAI11517

Comparative Study of Bone Cell Culture Methods for Tissue Engineering Applications
Thomas C., Kellam J., Burg K.
Page Count: 17
Published: 01 January 2004
Abstract
Download PDF PDF (2.6M)
Paper ID: JAI11624
DOI: 10.1520/JAI11624