Advanced Methods of Coating Adhesion Testing

    Volume 2, Issue 9 (October 2005)

    ISSN: 1546-962X

    CODEN: JAIOAD

    Page Count: 5


    Gitis, NV
    President, Center for Tribology, Inc., Campbell, CA

    Xiao, J
    Applications Manager, Center for Tribology, Inc., Campbell, CA

    Vinogradov, M
    Engineering Manager, Center for Tribology, Inc., Campbell, CA

    (Received 4 October 2004; accepted 8 April 2005)

    Abstract

    Adhesion of coatings from 1 nm to 0.1 mm was successfully evaluated with multi-sensing technology, based on simultaneous high-resolution force, electrical, and acoustic measurements. Sharp changes in the signals were indicative of the thresholds of adhesion and delamination for various thin and thick coatings during scratching and indenting with several test tools, both sharp (diamond tips) and dull (balls).


    Paper ID: JAI12958

    DOI: 10.1520/JAI12958

    ASTM International is a member of CrossRef.

    Author
    Title Advanced Methods of Coating Adhesion Testing
    Symposium Advances in Adhesives, Adhesion Science, and Testing, 2004-10-06
    Committee D14