Volume 7, Issue 2 (February 2010)

    Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media

    (Received 22 July 2009; accepted 1 December 2009)

    Published Online: 2010

    CODEN: JAIOAD

      Format Pages Price  
    PDF Version 10 $25   ADD TO CART


    Abstract

    Solutions of high molecular weight polymers are used widely in the heat treatment of metal alloys known as quenching. Water-soluble polymers offer a number of environmental, economic, and technical advantages, including eliminating the quench-oil fire hazard. The cooling power of water-soluble polymers such as polyethylene glycol (PEG) and salts aqueous solutions is studied with a cylindrical test probe of Inconel 600 by using a quenchometer. The dependences of the cooling rates, at each bath temperature, on polymer concentration and agitation are established. The present paper describes, through an understanding of the quenching mechanism, the effect that some parameters concerning the control of polymer quenchants have on their behavior. The effect of the salts on the quenching characteristics has also been studied. A study has been made of the relationship between the concentration of PEG, bath temperature, agitation, and cooling power in aqueous quenchants that contain up to 20 % of PEG. The presence of 5 % or less of the polymer in solution increased the cooling power of the quench in comparison with the water quenchant. However, increasing polymer concentration will decrease the cooling power as well as the maximum cooling rate because of the formation of the vapor blanket in the first phase of the quenching mechanism. The hardening power (HP) of the PEG quenchant solution was characterized on the cooling curve by the two critical points, CRF (the cooling rate at the ferrite/pearlite nose) and CRM (the cooling rate at the martensite start transformation), using an empirical relation giving HP in function of the measured polymer quenchant cooling characteristics. The highest HP was obtained in dilute solution of PEG having a concentration of 2.5 %, which reaches a value of 2051 at 20°C and 1951 at 45°C, under agitation.


    Author Information:

    Ikkene, Rafika
    Laboratoire d’Etudes Physico-Chimiques des Matériaux, Application à l’Environnement Faculté de Chimie, USTHB, Bab Ezzouar, Alger,

    Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques (CRAPC), Alger,

    Koudil, Zahia
    Laboratoire d’Etudes Physico-Chimiques des Matériaux, Application à l’Environnement Faculté de Chimie, USTHB, Bab Ezzouar, Alger,

    Mouzali, Mohamed
    Laboratoire d’Etudes Physico-Chimiques des Matériaux, Application à l’Environnement Faculté de Chimie, USTHB, Bab Ezzouar, Alger,


    Stock #: JAI102660

    ISSN: 1546-962X

    DOI: 10.1520/JAI102660

    ASTM International is a member of CrossRef.

    Author
    Title Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media
    Symposium , 0000-00-00
    Committee D01