ISSN: 1546-962X
Page Count: 15

Effect of Heat Treatment and Tantalum on Microstructure and Mechanical Properties of Fe-9Cr-2W-0.25V Steel
Klueh, RL

Hashimoto, N

Sokolov, MA

Abstract

An Fe-9Cr-2W-0.25V-0.07Ta-0.1C (9Cr-2WVTa) steel has a smaller prior-austenite grain size than this same composition without tantalum (9Cr-2WV) when the steels are given a similar heat treatment. Except for prior-austenite grain size, the microstructures of the steels are similar before irradiation, and they develop similar changes in microstructure during irradiation. Nevertheless, the 9Cr-2WVTa shows less effect of irradiation on the Charpy behavior. To determine the effect of grain size on the Charpy properties of the 9Cr-2WV and 9Cr-2WVTa, specimens of the two steels were given various normalization heat treatments to produce different prior austenite grain sizes, and the tensile and impact properties were determined. For the smaller prior-austenite grain sizes, the 9Cr-2WV steel had impact properties similar to or better than those of the 9Cr-2WVTa steel. Differences in the microstructures of the steels were used to explain the observations and what they mean for developing steels with improved properties.

Keywords:
ferritic/martensitic steels, tensile properties, impact properties, prior-austenite grain size, heat treatment

Paper ID: JAI11337
DOI: 10.1520/JAI11337
ASTM International is a member of CrossRef.