Volume 18, Issue 3 (September 1995)

    Strain Rate Effects on Shear Modulus and Damping of Normally Consolidated Clay

    CODEN: GTJOAD

      Format Pages Price  
    PDF Version 11 $25   ADD TO CART


    Abstract

    A laboratory investigation into the effects of shear strain rate on shear modulus and hysteretic damping of normally consolidated clays was carried out. The effects of shear strain rate were examined at cyclic shear strain amplitudes between 10−6 and 10−3 in undrained cyclic torsion shear tests. When the frequency of loading was changed between 0.005 and 0.1 Hz, the equivalent shear modulus was insensitive to the rate of shear straining. On the other hand, the hysteretic damping increased according to the decrease in the shear strain rate. Furthermore, for shear strains less than about 2 × 10−5, the maximum stiffness was hardly influenced by the shear strain rate, type of loading, number of cycles, and the cyclic prestraining; it can therefore be characterized as pseudoelastic shear modulus. On the basis of the test results, it is concluded that when applying the results of laboratory cyclic loading tests to the analysis of in situ cyclic loading problems, the effects of shear strain rate on hysteretic damping should be properly evaluated to match the frequency of loading expected in the field.


    Author Information:

    Shibuya, S
    Associate professor, professor, and research associate, Hokkaido University, Sapporo,

    Mitachi, T
    Associate professor, professor, and research associate, Hokkaido University, Sapporo,

    Fukuda, F
    Associate professor, professor, and research associate, Hokkaido University, Sapporo,

    Degoshi, T
    Engineer, Tokyo Electric Power Company Ltd.,


    Stock #: GTJ11005J

    ISSN: 0149-6115

    DOI: 10.1520/GTJ11005J

    ASTM International is a member of CrossRef.

    Author
    Title Strain Rate Effects on Shear Modulus and Damping of Normally Consolidated Clay
    Symposium , 0000-00-00
    Committee D18