Volume 31, Issue 5 (September 2008)

    Comparison of Averaging Procedures for Point Load Testing of Rock

    (Received 1 June 2007; accepted 17 February 2008)

    Published Online: 2008

    CODEN: GTJOAD

      Format Pages Price  
    PDF 5 $25   ADD TO CART


    Abstract

    This paper presents the experimental results of a laboratory point load testing program carried out to analyze the effect of two different point load mean value calculation procedures on the prediction accuracy of uniaxial compressive strength of rocks. Apart from the calculation procedure corresponding to the one suggested by ASTM and ISRM, a second calculation procedure involving the ordinary arithmetic mean value was used in the analyses. Axial point load tests were conducted on a total of 19 rocks having two different thickness-to-diameter ratios. Finally, the results of the point load tests were correlated with those of the standard uniaxial compressive strength tests, and some test statistics were employed to determine the relative effectiveness of the considered calculation procedures. Valid for axial testing method and the tested rock types, it was concluded that the suggested mean value calculation procedure by the ASTM and ISRM has no significant advantage compared with the traditional statistical procedure that involves ordinary arithmetic mean.


    Author Information:

    Karaca, Z.
    Dokuz Eylul University, Torbalı Vocational School, Dept. of Marble, Izmir,

    Yilmaz, N. Gunes
    Eskisehir Osmangazi University, Mining Engineering Department, Eskisehir,

    Goktan, R. M.
    Eskisehir Osmangazi University, Mining Engineering Department, Eskisehir,


    Stock #: GTJ101276

    ISSN: 0149-6115

    DOI: 10.1520/GTJ101276

    ASTM International is a member of CrossRef.

    Author
    Title Comparison of Averaging Procedures for Point Load Testing of Rock
    Symposium , 0000-00-00
    Committee D18