ISSN: 0884-6804
CODEN: JCTRER
Page Count: 7

Deformation of a Metal-Matrix Tensile Coupon with a Central Slot: An Experimental Study
Joh, D
Professor, assistant professor, and graduate assistants, Virginia Polytechnic Institute and State University, VA

Post, D
Professor, assistant professor, and graduate assistants, Virginia Polytechnic Institute and State University, VA

Jo, J
Professor, assistant professor, and graduate assistants, Virginia Polytechnic Institute and State University, VA

Czarnek, R
Professor, assistant professor, and graduate assistants, Virginia Polytechnic Institute and State University, VA

Guo, Y
Professor, assistant professor, and graduate assistants, Virginia Polytechnic Institute and State University, VA

Abstract

A metal-matrix specimen was investigated using high-sensitivity moire interferometry. The specimen was a 6-ply [0/±45]^s boron-aluminum tensile coupon with a central slot. In-plane displacement fields were analyzed at various load levels from 15 to 95% of the failure load. Normal and shear strains were determined from displacement gradients. Highly localized plastic slip zones occurred in the ductile aluminum matrix tangent to the ends of the slot. Shear strains in the slip zone were an order of magnitude greater than the largest normal strains in the specimen. The shear-strain concentration factor γ^xy/ϵff rose dramatically with the onset of plastic slip and continued to rise gradually with load to 95% of the failure load. Upon unloading, shear strains in the slip zone remained precariously high. The maximum normal strain occurred at the end of the slot, where the normal-strain concentration factor ϵy/ϵff diminished as the load increased.

Keywords:
composites, metal-matrix composites, boron-aluminum, central slot, elastic-plastic, deformation fields, plastic slip, strain concentration factors, moire interferometry, experimental analysis, micromechanics

Paper ID: CTR10420J
DOI: 10.1520/CTR10420J
ASTM International is a member of CrossRef.