ISSN: 0884-6804
Page Count: 10

Compressive Strength of Hybrid Composite Tubes After Low-Energy Impact
Liu, H-K
Associate professor, Feng-Chia University,

Tai, N-H
Associate professor, National Tsing-Hua University,

Lin, S-Y
Research assistant, Feng-Chia University,

Abstract

Hybrid composite tubes were wound with Kevlar fibers under three winding angles and sandwiched by either hoop carbon or glass fibers. The tubes subjected to low-energy impact using a drop-weight impact apparatus with a round-ended impactor have been investigated. Compression after impact (CAI) strengths were measured, and the damage tolerances of hybrid tubes were assessed by the residual strengths. Compared to compressive strengths of the tubes without low-energy impact, CAI strengths of hybrid tubes decreased significantly due to delamination generation and propagation from the impact site. The microstructure of CAI hybrid tubes were examined, and explanations for their damage modes through the thickness were proposed. We also studied the damage mechanisms that were induced by impact and compression, and their interaction, which was related to winding angle and hybrid fibers. In addition, the correlation among damage mechanisms, failure modes, and CAI strengths was also investigated.

Keywords:
hybrid, low-energy impact, filament winding, compression after impact, delamination

Paper ID: CTR10948J
DOI: 10.1520/CTR10948J
ASTM International is a member of CrossRef.