ISSN: 0149-6123
Page Count: 7

Laboratory Assessment of the Potential Rate of ASR Expansion of Field Concrete
Pedneault, A
Project Engineer, Inspec-Sol Inc., QC

Frenette, J
Research Assistant, Universite Laval, QC

Berube, M-A
Full Professor, Universite Laval, QC

Rivest, M
Project Engineer, Direction Ingenierie, Hydro Quebec, QC

(Received 4 June 2001; accepted 9 January 2002)

Abstract

In-situ monitoring of concrete deformations and movements is the best way to assess the current expansion of concrete members affected by alkali-silica reactivity (ASR). However, laboratory tests on cores are less expensive and more rapid, and are commonly used to assess the potential for further expansion due to ASR. The risk of expansion and damage due to ASR can be reasonably assessed in the laboratory from: (1), the inherent expansivity of the concrete under study, which is determined by testing core samples in air at 100% RH and 38°C; (2), the residual absolute reactivity of the aggregates present in the concrete under study, which can be determined by testing core samples in 1N NaOH solution at 38°C or, even better for coarse aggregates, by testing aggregates extracted from cores through the concrete prism test CSA A23.2-14A or ASTM C 1293; (3), the amount of alkalies that are still active in the concrete, i.e. in the pore solution, which is estimated by a hot-water extraction method on ground concrete, and (4), humidity, (5), temperature, and (6), stress conditions (confinement, reinforcement, pretensioning, postensioning) in service. The individual risk indices corresponding to each of the above parameters are combined to determine the potential rate of ASR expansion of concrete members in service, either already affected by ASR or not.

Keywords:
Alkali-aggregate reaction, alkali-silica reaction, concrete cores, expansion tests, humidity, prognosis, soluble alkali content, stress conditions, temperature

Paper ID: CCA10486J
DOI: 10.1520/CCA10486J
ASTM International is a member of CrossRef.