|
A1-00(2010) - Standard Specification for Carbon Steel Tee Rails
|
|
A2-02(2008) - Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
|
|
A3-01(2012) - Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
|
|
A6/A6M-12a - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
|
|
A6/A6M-RUS-12a - Стандартная спецификация на толстолистовой, сортовой, фасонный прокат и шпунтовые сваи из конструкционной стали
|
|
A20/A20M-11 - Standard Specification for General Requirements for Steel Plates for Pressure Vessels
|
|
A20/A20M-RUS-11 - Стандартная спецификация на общие требования к толстолистовой стали для сосудов, работающих под давлением
|
|
A27/A27M-10 - Standard Specification for Steel Castings, Carbon, for General Application
|
|
A29/A29M-12 - Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
|
|
A36/A36M-12 - Standard Specification for Carbon Structural Steel
|
|
A36/A36M-SP-12 - Especificación Normalizada para Acero al Carbono Estructural
|
|
A49-12 - Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
|
|
A53/A53M-12 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
|
|
A53/A53M-SP-12 - Especificación Normalizada para Tubos de Acero Negro e Inmersos en Caliente, Galvanizados, Soldados y Sin Costura
|
|
A65-07(2013) - Standard Specification for Steel Track Spikes
|
|
A66-07(2013) - Standard Specification for Steel Screw Spikes
|
|
A67-00(2010) - Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
|
|
A82/A82M-07 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
|
|
A82/A82M-RUS-07 - Стандартная спецификация на гладкую стальную проволоку для бетонной арматуры
|
|
A82/A82M-SP-07 - Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto
|
|
A99-03(2009) - Standard Specification for Ferromanganese
|
|
A100-07(2012) - Standard Specification for Ferrosilicon
|
|
A101-04(2009) - Standard Specification for Ferrochromium
|
|
A102-04(2009) - Standard Specification for Ferrovanadium
|
|
A105/A105M-12 - Standard Specification for Carbon Steel Forgings for Piping Applications
|
|
A106/A106M-11 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
|
|
A106/A106M-RUS-11 - Стандартная спецификация на бесшовные трубы из углеродистой стали для применения при высоких температурах
|
|
A108-07 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
|
|
A109/A109M-08 - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
|
|
A125-96(2007) - Standard Specification for Steel Springs, Helical, Heat-Treated
|
|
A128/A128M-93(2012) - Standard Specification for Steel Castings, Austenitic Manganese
|
|
A131/A131M-08 - Standard Specification for Structural Steel for Ships
|
|
A132-04(2009) - Standard Specification for Ferromolybdenum
|
|
A134-96(2012) - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
|
|
A135/A135M-09 - Standard Specification for Electric-Resistance-Welded Steel Pipe
|
|
A139/A139M-04(2010) - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
|
|
A144-04(2009) - Specification for Ferrotungsten
|
|
A146-04(2009) - Standard Specification for Molybdenum Oxide Products
|
|
A148/A148M-08 - Standard Specification for Steel Castings, High Strength, for Structural Purposes
|
|
A167-99(2009) - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
|
A176-99(2009) - Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
|
|
A178/A178M-02(2012) - Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
|
|
A179/A179M-90a(2012) - Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
|
|
A181/A181M-12 - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
|
|
A182/A182M-12b - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
|
A183-03(2009) - Standard Specification for Carbon Steel Track Bolts and Nuts
|
|
A184/A184M-06(2011) - Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
|
|
A185/A185M-07 - Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
|
|
A185/A185M-RUS-07 - Стандартная спецификация на стальную сварную гладкую проволочную арматуру для бетона
|
|
A185/A185M-SP-07 - Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, para Concreto
|
|
A192/A192M-02(2012) - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
|
|
A193/A193M-12b - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
|
|
A194/A194M-12a - Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
|
|
A203/A203M-12 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
|
|
A204/A204M-12 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
|
|
A209/A209M-03(2012) - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
|
|
A210/A210M-02(2012) - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
|
|
A213/A213M-11a - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
|
|
A213/A213M-RUS-11a - Стандартная спецификация на бесшовные трубы из ферритной и аустенитной легированной стали для котлов, пароперегревателей и теплообменников
|
|
A214/A214M-96(2012) - Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
|
A216/A216M-12 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
|
|
A217/A217M-12 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
|
|
A225/A225M-12 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
|
|
A227/A227M-06(2011) - Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
|
|
A228/A228M-07 - Standard Specification for Steel Wire, Music Spring Quality
|
|
A229/A229M-12 - Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
|
|
A230/A230M-05(2011)e1 - Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
|
A231/A231M-10 - Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
|
|
A232/A232M-05(2011)e1 - Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
|
|
A234/A234M-11a - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
|
|
A240/A240M-12a - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
|
|
A242/A242M-04(2009) - Standard Specification for High-Strength Low-Alloy Structural Steel
|
|
A242/A242M-SP-04(2009) - Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación
|
|
A249/A249M-10a - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
|
|
A250/A250M-05(2009) - Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
|
|
A252-10 - Standard Specification for Welded and Seamless Steel Pipe Piles
|
|
A254/A254M-12 - Standard Specification for Copper-Brazed Steel Tubing
|
|
A255-10 - Standard Test Methods for Determining Hardenability of Steel
|
|
A255-RUS-10 - Стандартные методы определения закаливаемости стали
|
|
A262-10 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
|
A262-RUS-10 - Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей
|
|
A263-12 - Standard Specification for Stainless Chromium Steel-Clad Plate
|
|
A264-12 - Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
|
|
A265-12 - Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
|
|
A266/A266M-11 - Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
|
|
A268/A268M-10 - Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
|
A269-10 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
|
|
A270/A270M-10 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
|
|
A275/A275M-08(2013) - Standard Practice for Magnetic Particle Examination of Steel Forgings
|
|
A276-10 - Standard Specification for Stainless Steel Bars and Shapes
|
|
A276-RUS-10 - Стандартные технические условия на прутки и профили из нержавеющей стали
|
|
A283/A283M-12a - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
|
|
A285/A285M-12 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
|
|
A285/A285M-RUS-12 - Стандартные технические условия на плиты для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение
|
|
A288-91(2008) - Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
|
|
A289/A289M-97(2008) - Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
|
|
A290/A290M-05(2010) - Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
|
|
A291/A291M-05(2010) - Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
|
|
A295/A295M-09 - Standard Specification for High-Carbon Anti-Friction Bearing Steel
|
|
A297/A297M-10 - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
|
|
A299/A299M-09 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
|
|
A302/A302M-12 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
|
A304-11 - Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
|
|
A311/A311M-04(2010) - Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
|
|
A312/A312M-12a - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
|
|
A313/A313M-10e1 - Standard Specification for Stainless Steel Spring Wire
|
|
A314-08 - Standard Specification for Stainless Steel Billets and Bars for Forging
|
|
A320/A320M-11a - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
|
|
A320/A320M-RUS-11a - Стандартные технические условия на болтовые соединения из легированной и нержавеющей стали для эксплуатации в условиях низких температур
|
|
A322-07 - Standard Specification for Steel Bars, Alloy, Standard Grades
|
|
A322-RUS-07 - Стандартная спецификация на прутки из легированных сталей стандартных сортов
|
|
A323-05(2010) - Standard Specification for Ferroboron
|
|
A324-08(2013) - Standard Specification for Ferrotitanium
|
|
A328/A328M-07(2012) - Standard Specification for Steel Sheet Piling
|
|
A333/A333M-11 - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
|
|
A333/A333M-RUS-11 - Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур
|
|
A334/A334M-04a(2010) - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
|
|
A334/A334M-RUS-04a(2010) - Cтандартная спецификация на бесшовные и сварные трубы из углеродистой и легированной стали для использования при низких температурах
|
|
A335/A335M-11 - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
|
|
A335/A335M-RUS-11 - Стандартная спецификация на бесшовные трубы из ферритной легированной стали для высокотемпературных условий эксплуатации
|
|
A336/A336M-10a - Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
|
|
A350/A350M-12 - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
|
|
A350/A350M-RUS-12 - Стандартная спецификация на поковки из углеродистой и низколегированной стали, требующие испытаний на ударную вязкость для деталей трубопровода
|
|
A351/A351M-12b - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
|
|
A352/A352M-06(2012) - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
|
|
A353/A353M-09 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
|
|
A355-89(2012) - Standard Specification for Steel Bars, Alloys, for Nitriding
|
|
A356/A356M-11 - Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
|
|
A358/A358M-12 - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
|
|
A368-95a(2009) - Standard Specification for Stainless Steel Wire Strand
|
|
A369/A369M-11 - Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
|
|
A370-12a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
|
|
A370-RUS-12a - Стандартные методы испытаний и определения механических характеристик стальных изделий
|
|
A372/A372M-12 - Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
|
|
A376/A376M-12 - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
|
|
A380/A380M-13 - Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
|
|
A381-96(2012) - Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
|
|
A387/A387M-11 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
|
|
A388/A388M-11 - Standard Practice for Ultrasonic Examination of Steel Forgings
|
|
A388/A388M-RUS-11 - Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок
|
|
A389/A389M-10 - Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
|
|
A391/A391M-07(2012) - Standard Specification for Grade 80 Alloy Steel Chain
|
|
A400-69(2012) - Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
|
|
A401/A401M-10 - Standard Specification for Steel Wire, Chromium-Silicon Alloy
|
|
A403/A403M-12 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
|
|
A407-07(2013) - Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
|
|
A409/A409M-09 - Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
|
|
A413/A413M-07(2012) - Standard Specification for Carbon Steel Chain
|
|
A414/A414M-10 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
|
|
A416/A416M-12a - Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
|
|
A418/A418M-10 - Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
|
|
A420/A420M-10a - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
|
|
A420/A420M-RUS-10a - Стандартные технические условия на трубные фитинги из кованой углеродистой и легированной стали для эксплуатации в условиях низких температур
|
|
A421/A421M-10 - Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
|
|
A421/A421M-SP-10 - Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado
|
|
A423/A423M-09 - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
|
|
A424/A424M-09a - Standard Specification for Steel, Sheet, for Porcelain Enameling
|
|
A426/A426M-11a - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
|
|
A427/A427M-10 - Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
|
|
A434-06(2012) - Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
|
|
A435/A435M-90(2012) - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
|
|
A435/A435M-RUS-90(2012) - Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя
|
|
A437/A437M-12 - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
|
|
A447/A447M-11 - Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
|
|
A450/A450M-10 - Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
|
|
A451/A451M-06(2010) - Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
|
|
A453/A453M-12 - Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
|
|
A455/A455M-12a - Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
|
|
A456/A456M-08(2013) - Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
|
|
A466/A466M-07(2012) - Standard Specification for Weldless Chain
|
|
A467/A467M-07(2012) - Standard Specification for Machine and Coil Chain
|
|
A469/A469M-07(2012) - Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
|
|
A470/A470M-05(2010) - Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
|
|
A471/A471M-09 - Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
|
|
A472/A472M-07(2012) - Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
|
|
A473-01(2009) - Standard Specification for Stainless Steel Forgings
|
|
A478-97(2008) - Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
|
|
A479/A479M-13 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
|
|
A480/A480M-12 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
|
A480/A480M-RUS-12 - Стандартная спецификация на общие требования к плитам, листам и полосам, катанным из нержавеющей и жаропрочной стали
|
|
A481-05(2010) - Standard Specification for Chromium Metal
|
|
A482/A482M-11 - Standard Specification for Ferrochrome-Silicon
|
|
A483/A483M-10 - Standard Specification for Silicomanganese
|
|
A484/A484M-13 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
|
|
A485-09 - Standard Specification for High Hardenability Antifriction Bearing Steel
|
|
A487/A487M-93(2012) - Standard Specification for Steel Castings Suitable for Pressure Service
|
|
A488/A488M-12 - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
|
|
A492-95(2009) - Standard Specification for Stainless Steel Rope Wire
|
|
A493-09 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
|
A494/A494M-13 - Standard Specification for Castings, Nickel and Nickel Alloy
|
|
A495-06(2010) - Standard Specification for Calcium-Silicon Alloys
|
|
A496/A496M-07 - Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
|
|
A497/A497M-07 - Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
|
|
A497/A497M-SP-07 - Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero, Corrugado, para Concreto
|
|
A498-06 - Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
|
|
A499-89(2008) - Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
|
|
A500/A500M-10a - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
|
A500/A500M-RUS-10a - Стандартные технические условия на холодногнутые, сварные и бесшовные круглые и профильные конструкционные трубы из углеродистой стали
|
|
A500/A500M-SP-10a - Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular
|
|
A501-07 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
|
|
A501-SP-07 - Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura
|
|
A503/A503M-01(2011) - Standard Specification for Ultrasonic Examination of Forged Crankshafts
|
|
A504/A504M-08(2013) - Standard Specification for Wrought Carbon Steel Wheels
|
|
A505-12 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
|
A506-12 - Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
|
|
A507-12 - Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
|
|
A508/A508M-05b(2010) - Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
|
|
A510/A510M-13 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
|
|
A511/A511M-12 - Standard Specification for Seamless Stainless Steel Mechanical Tubing
|
|
A512-06(2012) - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
|
|
A513/A513M-12 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
|
|
A514/A514M-05(2009) - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
|
|
A515/A515M-10 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
|
|
A516/A516M-10 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
|
|
A516/A516M-RUS-10 - Стандартная спецификация на толстолистовую углеродистую сталь для сосудов, работающих под давлением для применения при умеренных и низких температурах
|
|
A517/A517M-10 - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
|
|
A519-06(2012) - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
|
|
A521/A521M-06(2011) - Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
|
|
A522/A522M-11 - Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
|
|
A523-96(2012) - Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
|
A524-96(2012) - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
|
|
A529/A529M-05(2009) - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
|
|
A529/A529M-RUS-05(2009) - Стандартные технические условия на высокопрочную марганцево-углеродистую сталь конструкционного качества
|
|
A530/A530M-12 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
|
|
A531/A531M-12 - Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
|
|
A533/A533M-09e1 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
|
A534-09 - Standard Specification for Carburizing Steels for Anti-Friction Bearings
|
|
A534-RUS-09 - Стандартная спецификация на науглероживание сталей для антифрикционных вкладышей подшипников
|
|
A537/A537M-08 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
|
|
A537/A537M-RUS-08 - Стандартная спецификация на толстолистовую марганцевокремнистоуглеродистую термообработанную сталь для сосудов, работающих под давлением
|
|
A540/A540M-11 - Standard Specification for Alloy-Steel Bolting for Special Applications
|
|
A541/A541M-05(2010) - Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
|
|
A542/A542M-09 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
|
|
A542/A542M-RUS-09 - Стандартные технические условия на плиты для сосудов под давлением, закаленные и отпущенные, из стали, легированной хромом и молибденом и хромом, молибденом и ванадием
|
|
A543/A543M-09 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
|
|
A550-06(2010) - Standard Specification for Ferrocolumbium
|
|
A551/A551M-08(2013) - Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
|
|
A553/A553M-10 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
|
|
A554-11 - Standard Specification for Welded Stainless Steel Mechanical Tubing
|
|
A555/A555M-05(2009) - Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
|
|
A556/A556M-96(2012) - Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
|
A560/A560M-12 - Standard Specification for Castings, Chromium-Nickel Alloy
|
|
A561-08 - Standard Practice for Macroetch Testing of Tool Steel Bars
|
|
A561-RUS-08 - Стандартная методика контроля макроструктуры травлением для сортового проката из инструментальной стали
|
|
A562/A562M-10 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
|
|
A564/A564M-10 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
|
|
A564/A564M-RUS-10 - Стандартная спецификация на горячекатаную и холоднотянутую сортовую и фасонную дисперсионно-твердеющую нержавеющую сталь
|
|
A565/A565M-10 - Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
|
|
A568/A568M-11b - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
|
A572/A572M-12a - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
|
|
A573/A573M-05(2009) - Standard Specification for Structural Carbon Steel Plates of Improved Toughness
|
|
A575-96(2007) - Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
|
|
A575-RUS-96(2007) - Стандартные технические условия на прутки из коммерческой углеродистой стали М-марок
|
|
A576-90b(2012) - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
|
|
A577/A577M-90(2012) - Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
|
|
A578/A578M-07(2012) - Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
|
|
A579/A579M-04a(2009) - Standard Specification for Superstrength Alloy Steel Forgings
|
|
A579/A579M-RUS-04a(2009) - Стандартная спецификация на поковки из сверхпрочной легированной стали
|
|
A580/A580M-13 - Standard Specification for Stainless Steel Wire
|
|
A581/A581M-95b(2009) - Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
|
A582/A582M-12e1 - Standard Specification for Free-Machining Stainless Steel Bars
|
|
A587-96(2012) - Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
|
|
A588/A588M-10 - Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
|
|
A588/A588M-SP-10 - Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosión Atmosférica
|
|
A589/A589M-06(2012) - Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
|
|
A592/A592M-10 - Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
|
|
A595/A595M-11 - Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
|
|
A597-87(2010) - Standard Specification for Cast Tool Steel
|
|
A599/A599M-07(2012) - Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
|
|
A600-92a(2010) - Standard Specification for Tool Steel High Speed
|
|
A601/A601M-10 - Standard Specification for Electrolytic Manganese Metal
|
|
A604/A604M-07(2012) - Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
|
|
A606/A606M-09a - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
|
|
A608/A608M-12 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
|
|
A609/A609M-12 - Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
|
|
A610-79(2009) - Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
|
|
A612/A612M-12 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
|
|
A615/A615M-12 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
|
|
A615/A615M-SP-12 - Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto
|
|
A618/A618M-04(2010) - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
|
|
A623-11 - Standard Specification for Tin Mill Products, General Requirements
|
|
A623M-11 - Standard Specification for Tin Mill Products, General Requirements [Metric]
|
|
A624/A624M-03(2008)e1 - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
|
|
A625/A625M-08 - Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
|
|
A626/A626M-03(2008)e1 - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
|
|
A630-03(2009) - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
|
|
A632-04(2009) - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
|
|
A633/A633M-01(2011) - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
|
|
A633/A633M-RUS-01(2011) - Стандартные технические условия на плиты из нормализованной высокопрочной низколегированной конструкционной стали
|
|
A635/A635M-09b - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
|
|
A635/A635M-RUS-09b - Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочную низколегированную с улучшенной формуемостью, общие требования
|
|
A636-08(2013) - Standard Specification for Nickel Oxide Sinter
|
|
A638/A638M-10 - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
|
|
A645/A645M-10 - Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
|
|
A646/A646M-06(2011) - Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
|
|
A648-12 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
|
|
A649/A649M-10 - Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
|
|
A650/A650M-03(2008) - Standard Specification for Tin Mill Products, Black Plate, Double Reduced
|
|
A656/A656M-12ae1 - Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
|
|
A657/A657M-03(2008)e1 - Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
|
|
A659/A659M-12 - Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
|
|
A660/A660M-11 - Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
|
|
A662/A662M-12 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
|
|
A663/A663M-12 - Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
|
|
A666-10 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
|
A668/A668M-04(2009) - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
|
|
A671/A671M-10 - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
|
|
A671/A671M-RUS-10 - Стандартные технические условия на стальную трубу, полученную электросваркой оплавлением, для температуры окружающей среды и пониженных температур
|
|
A672/A672M-09 - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
|
|
A673/A673M-07(2012) - Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
|
|
A673/A673M-RUS-07(2012) - Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость
|
|
A675/A675M-03(2009) - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
|
|
A675/A675M-RUS-03(2009) - Стандартная спецификация на горячедеформируемую углеродистую сортовую сталь специального качества. Механические свойства
|
|
A679/A679M-06(2012) - Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
|
|
A681-08 - Standard Specification for Tool Steels Alloy
|
|
A684/A684M-12 - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
|
|
A686-92(2010) - Standard Specification for Tool Steel, Carbon
|
|
A688/A688M-12 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
|
A689-97(2007)e1 - Standard Specification for Carbon and Alloy Steel Bars for Springs
|
|
A690/A690M-07(2012) - Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
|
|
A691/A691M-09 - Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
|
|
A691/A691M-RUS-09 - Стандартные технические условия на трубу из углеродистой и легированной стали, полученную электросваркой оплавлением, для эксплуатации в условиях высокого давления при высоких температурах
|
|
A693-06 - Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
|
A694/A694M-08 - Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
|
|
A696-90a(2012) - Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
|
|
A700-05 - Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
|
|
A700-RUS-05 - Стандартные методы упаковки, маркировки и погрузки стальных изделий при их отправке потребителю
|
|
A701/A701M-10 - Standard Specification for Ferromanganese-Silicon
|
|
A702-89(2006) - Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
|
|
A703/A703M-12b - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
|
|
A704/A704M-06(2011) - Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
|
|
A705/A705M-95(2009) - Standard Specification for Age-Hardening Stainless Steel Forgings
|
|
A706/A706M-09b - Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
|
|
A706/A706M-SP-09b - Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
|
|
A707/A707M-10 - Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
|
|
A709/A709M-11 - Standard Specification for Structural Steel for Bridges
|
|
A709/A709M-RUS-11 - Стандартная спецификация на конструкционную сталь для мостов
|
|
A710/A710M-02(2007) - Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
|
|
A710/A710M-RUS-02(2007) - Стандартные технические условия на плиты из дисперсноупрочненной низкоуглеродистой никель-медь-хром-молибден-ниобиевой легированной конструкционной стали
|
|
A711/A711M-07(2012) - Standard Specification for Steel Forging Stock
|
|
A713-04(2010) - Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
|
|
A713-RUS-04(2010) - Стандартная спецификация на стальную проволоку, пружины из высокоуглеродистой стали, для термообрабатываемых деталей
|
|
A714-99(2009)e1 - Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
|
|
A722/A722M-12 - Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
|
|
A723/A723M-10 - Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
|
|
A724/A724M-09 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
|
|
A727/A727M-11 - Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
|
|
A729/A729M-09e1 - Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
|
|
A732/A732M-09 - Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
|
|
A733-03(2009)e1 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
|
|
A734/A734M-12 - Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
|
|
A735/A735M-12 - Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
|
|
A736/A736M-12 - Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
|
|
A737/A737M-09 - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
|
|
A738/A738M-12a - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
|
|
A739-90a(2012) - Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
|
|
A743/A743M-12 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
|
|
A744/A744M-10e1 - Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
|
|
A745/A745M-12 - Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
|
|
A747/A747M-12 - Standard Specification for Steel Castings, Stainless, Precipitation Hardening
|
|
A749/A749M-08 - Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
|
|
A751-11 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
|
|
A751-RUS-11 - Стандартные методы испытаний, практические руководства и терминология для проведения химического анализа стальной продукции
|
|
A756-09 - Standard Specification for Stainless Anti-Friction Bearing Steel
|
|
A757/A757M-10 - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
|
|
A758/A758M-10 - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
|
|
A759-10 - Standard Specification for Carbon Steel Crane Rails
|
|
A763-93(2009) - Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
|
|
A765/A765M-07(2012) - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
|
|
A767/A767M-09 - Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
|
|
A767/A767M-SP-09 - Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto
|
|
A768/A768M-05(2010) - Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
|
|
A769/A769M-05(2010) - Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
|
|
A770/A770M-03(2012) - Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
|
|
A770/A770M-RUS-03(2012) - Стандартная спецификация по испытанию на растяжение в направлении толщины стальных листов для специального применения
|
|
A774/A774M-09 - Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
|
|
A775/A775M-07b - Standard Specification for Epoxy-Coated Steel Reinforcing Bars
|
|
A775/A775M-SP-07b - Especificación Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi
|
|
A778-01(2009)e1 - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
|
|
A779/A779M-12 - Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
|
|
A781/A781M-12b - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
|
|
A786/A786M-05(2009) - Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
|
|
A787/A787M-09 - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
|
|
A788/A788M-11 - Standard Specification for Steel Forgings, General Requirements
|
|
A789/A789M-10a - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
|
A789/A789M-RUS-10a - Стандартные технические условия на бесшовные и сварные стальные трубы общего назначения из ферритной/аустенитной нержавеющей стали
|
|
A790/A790M-12 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
|
|
A793-96(2009) - Standard Specification for Rolled Floor Plate, Stainless Steel
|
|
A794/A794M-12 - Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
|
|
A795/A795M-08(2012) - Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
|
|
A799/A799M-10 - Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
|
|
A800/A800M-10 - Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
|
|
A802/A802M-95(2010)e1 - Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
|
|
A803/A803M-12 - Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
|
|
A805/A805M-09 - Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
|
|
A813/A813M-09 - Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
|
|
A814/A814M-08 - Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
|
A815/A815M-10a - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
|
A820/A820M-11 - Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
|
|
A821/A821M-10 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
|
|
A822/A822M-04(2010) - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
|
A827/A827M-11 - Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
|
|
A829/A829M-11 - Standard Specification for Alloy Structural Steel Plates
|
|
A830/A830M-11 - Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
|
|
A832/A832M-10 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
|
|
A832/A832M-RUS-10 - Стандартные технические условия на плиты для сосудов под давлением из стали, легированной хромом, молибденом и ванадием
|
|
A833-08a - Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
|
|
A835/A835M-10 - Standard Specification for Sizes of Ferroalloys and Alloy Additives
|
|
A836/A836M-02(2007) - Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
|
|
A837/A837M-06(2011) - Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
|
|
A837/A837M-RUS-06(2011) - Стандартная спецификация на легированные стальные поковки, используемые для цементации
|
|
A841/A841M-03a(2007) - Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
|
|
A844/A844M-09 - Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
|
|
A847/A847M-12 - Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
|
|
A853-04(2010) - Standard Specification for Steel Wire, Carbon, for General Use
|
|
A857/A857M-07(2013) - Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
|
|
A858/A858M-10a - Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
|
|
A859/A859M-04(2009) - Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
|
|
A860/A860M-10 - Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
|
|
A865/A865M-06(2012) - Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
|
|
A866-09 - Standard Specification for Medium Carbon Anti-Friction Bearing Steel
|
|
A871/A871M-12 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
|
|
A872/A872M-07a(2012) - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
|
|
A877/A877M-10e1 - Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
|
|
A878/A878M-05(2011) - Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
|
|
A881/A881M-10 - Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties
|
|
A882/A882M-04a(2010) - Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
|
|
A884/A884M-12 - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
|
|
A884/A884M-SP-12 - Especificación Normalizada para Alambre y Refuerzo Electrosoldado de Alambre de Acero Recubierto con Epoxi
|
|
A886/A886M-12 - Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
|
|
A887-89(2009) - Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
|
|
A890/A890M-12a - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
|
|
A891/A891M-10 - Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
|
|
A892-09 - Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
|
|
A895-89(2009) - Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
|
|
A898/A898M-07(2012) - Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
|
|
A899-91(2007) - Standard Specification for Steel Wire, Epoxy-Coated
|
|
A903/A903M-99(2012) - Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
|
|
A905-04(2010) - Standard Specification for Steel Wire, Pressure Vessel Winding
|
|
A906/A906M-02(2010) - Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
|
|
A908-03(2008)e1 - Standard Specification for Stainless Steel Needle Tubing
|
|
A909/A909M-06(2011) - Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
|
|
A910/A910M-12 - Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
|
|
A911/A911M-11 - Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
|
|
A913/A913M-11 - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
|
|
A914/A914M-92(2011) - Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
|
|
A915/A915M-08(2013) - Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
|
|
A920/A920M-07 - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
|
|
A921/A921M-93(2011) - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
|
|
A922-05(2010) - Standard Specification for Silicon Metal
|
|
A923-08 - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
|
|
A928/A928M-11 - Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
|
|
A931-08(2013) - Standard Test Method for Tension Testing of Wire Ropes and Strand
|
|
A933/A933M-10 - Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement
|
|
A934/A934M-07 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
|
|
A934/A934M-SP-07 - Especificación Normalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas con Epoxi
|
|
A938-07(2013) - Standard Test Method for Torsion Testing of Wire
|
|
A939/A939M-12 - Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
|
|
A940/A940M-06(2011) - Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
|
|
A941-10a - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
|
|
A943/A943M-01(2009) - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
|
|
A944-10 - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
|
|
A945/A945M-06(2011) - Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
|
|
A949/A949M-01(2009) - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
|
|
A950/A950M-11 - Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
|
|
A951/A951M-11 - Standard Specification for Steel Wire for Masonry Joint Reinforcement
|
|
A952/A952M-02(2010) - Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
|
|
A955/A955M-12e1 - Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
|
|
A956-12 - Standard Test Method for Leeb Hardness Testing of Steel Products
|
|
A957/A957M-12a - Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
|
|
A958/A958M-10 - Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
|
|
A959-11 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
|
A960/A960M-10 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings
|
|
A960/A960M-RUS-10 - Стандартные технические условия на общие требования для трубных фитингов из ковкой стали
|
|
A961/A961M-12a - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
|
|
A962/A962M-12 - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
|
|
A965/A965M-12 - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
|
|
A966/A966M-08(2012) - Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
|
|
A967/A967M-13 - Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
|
|
A968/A968M-96(2009) - Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
|
|
A970/A970M-12 - Standard Specification for Headed Steel Bars for Concrete Reinforcement
|
|
A972/A972M-00(2010) - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
|
|
A973/A973M-07(2012) - Standard Specification for Grade 100 Alloy Steel Chain
|
|
A980/A980M-11 - Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
|
|
A981/A981M-11 - Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
|
|
A982/A982M-10 - Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
|
|
A983/A983M-06(2011) - Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
|
|
A984/A984M-03(2009) - Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
|
|
A985/A985M-12a - Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
|
|
A986/A986M-01(2011) - Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
|
|
A987/A987M-09 - Standard Practice for Measuring Shape Characteristics of Tin Mill Products
|
|
A988/A988M-11 - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
|
A989/A989M-11 - Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
|
A990/A990M-11e01 - Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
|
|
A991/A991M-10 - Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
|
|
A992/A992M-11 - Standard Specification for Structural Steel Shapes
|
|
A992/A992M-RUS-11 - Стандартные технические условия на профили из конструкционной стали
|
|
A992/A992M-SP-11 - Especificación Normalizada para Perfiles de Acero Estructural
|
|
A994-12 - Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
|
|
A995/A995M-12a - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
|
|
A996/A996M-09b - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
|
|
A997-08(2012) - Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
|
|
A999/A999M-12 - Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
|
|
A1000/A1000M-11 - Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
|
|
A1001-01(2010) - Standard Specification for High Strength Steel Castings in Heavy Sections
|
|
A1002-10 - Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
|
|
A1005/A1005M-00(2010) - Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
|
|
A1006/A1006M-00(2010) - Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
|
|
A1007-07 - Standard Specification for Carbon Steel Wire for Wire Rope
|
|
A1008/A1008M-12a - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
|
|
A1010/A1010M-01(2009) - Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
|
|
A1011/A1011M-12b - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
|
|
A1012-10 - Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
|
|
A1014/A1014M-10 - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
|
|
A1015-01(2009) - Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
|
|
A1016/A1016M-11a - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
|
|
A1016/A1016M-RUS-11a - Стандартные технические условия на трубы из ферритной легированной стали, аустенитной легированной стали и нержавеющей стали, общие требования
|
|
A1017/A1017M-11 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
|
|
A1018/A1018M-10 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
|
|
A1020/A1020M-02(2012) - Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
|
|
A1021/A1021M-05(2010) - Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
|
|
A1022/A1022M-07 - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
|
|
A1023/A1023M-09e1 - Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
|
|
A1024/A1024M-02(2012) - Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
|
|
A1025/A1025M-10 - Standard Specification for Ferroalloys, General Requirements
|
|
A1028-03(2009) - Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
|
|
A1031/A1031M-12 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
|
|
A1032-04(2010) - Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
|
|
A1033-10 - Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
|
|
A1034/A1034M-10a - Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
|
|
A1035/A1035M-11 - Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
|
|
A1037/A1037M-05(2012) - Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
|
|
A1038-10a - Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
|
|
A1039/A1039M-13 - Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
|
|
A1040-10 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
|
|
A1041/A1041M-04(2009) - Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
|
|
A1043/A1043M-05(2009) - Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
|
|
A1044/A1044M-05(2010) - Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
|
|
A1047/A1047M-05(2009) - Standard Test Method for Pneumatic Leak Testing of Tubing
|
|
A1048/A1048M-06(2011) - Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
|
|
A1049/A1049M-10 - Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
|
|
A1053/A1053M-12 - Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
|
|
A1055/A1055M-10e1 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
|
|
A1058-12b - Standard Test Methods for Mechanical Testing of Steel Products—Metric
|
|
A1060/A1060M-11e1 - Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
|
|
A1061/A1061M-09 - Standard Test Methods for Testing Multi-Wire Steel Strand
|
|
A1062-10 - Standard Specification for Steel Castings Sampling
|
|
A1064/A1064M-12 - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
|
|
A1065/A1065M-09 - Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
|
|
A1066/A1066M-11 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
|
|
A1067/A1067M-12a - Standard Specification for Test Coupons for Steel Castings
|
|
A1069/A1069M-11 - Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
|
|
A1075-12 - Standard Specification for Flanged Steel U-Channel Posts
|
|
A1076/A1076M-12 - Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
|
|
A1077/A1077M-12 - Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
|
|
A1078/A1078M-12 - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
|
|
A1080-12 - Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
|
|
A1081/A1081M-12 - Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
|
|
A1082/A1082M-12 - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
|
|
A1083/A1083M-12 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
|
|
A1085-13 - Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
|
|
E527-12 - Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
|
|
E588-03(2009) - Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
|
|
E618-07 - Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
|
|
F1267-12 - Standard Specification for Metal, Expanded, Steel
|