ASTM Standards Source (DVD-ROM):
    ASTM Standards in Building Codes


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    A1 Standard Specification for Carbon Steel Tee Rails

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A36/A36M Standard Specification for Carbon Structural Steel

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A74 Standard Specification for Cast Iron Soil Pipe and Fittings

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A131/A131M Standard Specification for Structural Steel for Ships

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A197/A197M Standard Specification for Cupola Malleable Iron

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength

    A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

    A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A328/A328M Standard Specification for Steel Sheet Piling

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A342/A342M Standard Test Methods for Permeability of Weakly Magnetic Materials

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A413/A413M Standard Specification for Carbon Steel Chain

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A466/A466M Standard Specification for Weldless Chain

    A467/A467M Standard Specification for Machine and Coil Chain

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A492 Standard Specification for Stainless Steel Rope Wire

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501/A501M Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A536 Standard Specification for Ductile Iron Castings

    A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A580/A580M Standard Specification for Stainless Steel Wire

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

    A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A716 Standard Specification for Ductile Iron Culvert Pipe

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A746 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A759 Standard Specification for Carbon Steel Crane Rails

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A861 Standard Specification for High-Silicon Iron Pipe and Fittings

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process

    A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A899 Standard Specification for Steel Wire, Epoxy-Coated

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A992/A992M Standard Specification for Structural Steel Shapes

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    B1 Standard Specification for Hard-Drawn Copper Wire

    B2 Standard Specification for Medium-Hard-Drawn Copper Wire

    B3 Standard Specification for Soft or Annealed Copper Wire

    B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B29 Standard Specification for Refined Lead

    B30 Standard Specification for Copper Alloys in Ingot Form

    B32 Standard Specification for Solder Metal

    B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B75/B75M Standard Specification for Seamless Copper Tube

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B88 Standard Specification for Seamless Copper Water Tube

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B134/B134M Standard Specification for Brass Wire

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B160 Standard Specification for Nickel Rod and Bar

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

    B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

    B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

    B176 Standard Specification for Copper-Alloy Die Castings

    B177/B177M Standard Guide for Engineering Chromium Electroplating

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

    B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B447 Standard Specification for Welded Copper Tube

    B449 Standard Specification for Chromates on Aluminum

    B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B564 Standard Specification for Nickel Alloy Forgings

    B566 Standard Specification for Copper-Clad Aluminum Wire

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B587 Standard Specification for Welded Brass Tube

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

    B743 Standard Specification for Seamless Copper Tube in Coils

    B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

    B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B902/B902M Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

    C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

    C5 Standard Specification for Quicklime for Structural Purposes

    C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

    C12 Standard Practice for Installing Vitrified Clay Pipe Lines

    C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

    C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

    C22/C22M Standard Specification for Gypsum

    C27 Standard Classification of Fireclay and High-Alumina Refractory Brick

    C28/C28M Standard Specification for Gypsum Plasters

    C29/C29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

    C33/C33M Standard Specification for Concrete Aggregates

    C34 Standard Specification for Structural Clay Load-Bearing Wall Tile

    C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C55 Standard Specification for Concrete Building Brick

    C56 Standard Specification for Structural Clay Nonloadbearing Tile

    C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

    C61/C61M Standard Specification for Gypsum Keene's Cement

    C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

    C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

    C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

    C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

    C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C90 Standard Specification for Loadbearing Concrete Masonry Units

    C91/C91M Standard Specification for Masonry Cement

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone

    C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C119 Standard Terminology Relating to Dimension Stone

    C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C121/C121M Standard Test Method for Water Absorption of Slate

    C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C129 Standard Specification for Nonloadbearing Concrete Masonry Units

    C131/C131M Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C144 Standard Specification for Aggregate for Masonry Mortar

    C146 Standard Test Methods for Chemical Analysis of Glass Sand

    C147 Standard Test Methods for Internal Pressure Strength of Glass Containers

    C148 Standard Test Methods for Polariscopic Examination of Glass Containers

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C150/C150M Standard Specification for Portland Cement

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C158 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

    C162 Standard Terminology of Glass and Glass Products

    C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C168 Standard Terminology Relating to Thermal Insulation

    C169 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

    C170/C170M Standard Test Method for Compressive Strength of Dimension Stone

    C171 Standard Specification for Sheet Materials for Curing Concrete

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

    C188 Standard Test Method for Density of Hydraulic Cement

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C199 Standard Test Method for Pier Test for Refractory Mortars

    C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C206 Standard Specification for Finishing Hydrated Lime

    C207 Standard Specification for Hydrated Lime for Masonry Purposes

    C208 Standard Specification for Cellulosic Fiber Insulating Board

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C212 Standard Specification for Structural Clay Facing Tile

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

    C217/C217M Standard Test Method for Weather Resistance of Slate

    C219 Standard Terminology Relating to Hydraulic Cement

    C224 Standard Practice for Sampling Glass Containers

    C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C240 Standard Test Methods of Testing Cellular Glass Insulation Block

    C241/C241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C242 Standard Terminology of Ceramic Whitewares and Related Products

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C270 Standard Specification for Mortar for Unit Masonry

    C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C279 Standard Specification for Chemical-Resistant Masonry Units

    C287 Standard Specification for Chemical-Resistant Sulfur Mortar

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete

    C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C315 Standard Specification for Clay Flue Liners and Chimney Pots

    C317/C317M Standard Specification for Gypsum Concrete

    C318/C318M Standard Specification for Gypsum Formboard

    C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C336 Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation

    C338 Standard Test Method for Softening Point of Glass

    C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

    C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

    C373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles

    C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

    C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

    C395 Standard Specification for Chemical-Resistant Resin Mortars

    C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

    C399 Standard Practice for Use of Chemical-Resistant Resin Mortars

    C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories

    C404 Standard Specification for Aggregates for Masonry Grout

    C406/C406M Standard Specification for Roofing Slate

    C410 Standard Specification for Industrial Floor Brick

    C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

    C412 Standard Specification for Concrete Drain Tile

    C412M Standard Specification for Concrete Drain Tile (Metric)

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C428/C428M Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

    C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

    C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

    C444M Standard Specification for Perforated Concrete Pipe (Metric)

    C444 Standard Specification for Perforated Concrete Pipe

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

    C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

    C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

    C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

    C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

    C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

    C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

    C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

    C476 Standard Specification for Grout for Masonry

    C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

    C478 Standard Specification for Precast Reinforced Concrete Manhole Sections

    C481 Standard Test Method for Laboratory Aging of Sandwich Constructions

    C482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

    C485 Standard Test Method for Measuring Warpage of Ceramic Tile

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

    C501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

    C502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile

    C503/C503M Standard Specification for Marble Dimension Stone

    C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C514 Standard Specification for Nails for the Application of Gypsum Board

    C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C520 Standard Test Methods for Density of Granular Loose Fill Insulations

    C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C542 Standard Specification for Lock-Strip Gaskets

    C547 Standard Specification for Mineral Fiber Pipe Insulation

    C549 Standard Specification for Perlite Loose Fill Insulation

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C568/C568M Standard Specification for Limestone Dimension Stone

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

    C587 Standard Specification for Gypsum Veneer Plaster

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

    C598 Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

    C600 Standard Test Method of Thermal Shock Test on Glass Pipe

    C601 Standard Test Method for Pressure Test on Glass Pipe

    C602 Standard Specification for Agricultural Liming Materials

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C615/C615M Standard Specification for Granite Dimension Stone

    C616/C616M Standard Specification for Quartz-Based Dimension Stone

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C623 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

    C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester

    C629/C629M Standard Specification for Slate Dimension Stone

    C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

    C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

    C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

    C645 Standard Specification for Nonstructural Steel Framing Members

    C648 Standard Test Method for Breaking Strength of Ceramic Tile

    C650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

    C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

    C654 Standard Specification for Porous Concrete Pipe

    C654M Standard Specification for Porous Concrete Pipe (Metric)

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C657 Standard Test Method for D-C Volume Resistivity of Glass

    C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

    C675 Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

    C676 Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C693 Standard Test Method for Density of Glass by Buoyancy

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile

    C724 Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

    C728 Standard Specification for Perlite Thermal Insulation Board

    C729 Standard Test Method for Density of Glass by the Sink-Float Comparator

    C730 Standard Test Method for Knoop Indentation Hardness of Glass

    C735 Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

    C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C770 Standard Test Method for Measurement of Glass Stress—Optical Coefficient

    C777 Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C813 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

    C824 Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method

    C825 Standard Specification for Precast Concrete Barriers

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C829 Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

    C834 Standard Specification for Latex Sealants

    C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

    C840 Standard Specification for Application and Finishing of Gypsum Board

    C841 Standard Specification for Installation of Interior Lathing and Furring

    C842 Standard Specification for Application of Interior Gypsum Plaster

    C843 Standard Specification for Application of Gypsum Veneer Plaster

    C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

    C845/C845M Standard Specification for Expansive Hydraulic Cement

    C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

    C847 Standard Specification for Metal Lath

    C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

    C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

    C880/C880M Standard Test Method for Flexural Strength of Dimension Stone

    C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

    C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures

    C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

    C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

    C901 Standard Specification for Prefabricated Masonry Panels

    C902 Standard Specification for Pedestrian and Light Traffic Paving Brick

    C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C912 Standard Practice for Designing a Process for Cleaning Technical Glasses

    C913 Standard Specification for Precast Concrete Water and Wastewater Structures

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C916 Standard Specification for Adhesives for Duct Thermal Insulation

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants

    C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C926 Standard Specification for Application of Portland Cement-Based Plaster

    C927 Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C933 Standard Specification for Welded Wire Lath

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units

    C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

    C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

    C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C944/C944M Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

    C946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

    C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

    C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

    C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

    C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

    C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

    C965 Standard Practice for Measuring Viscosity of Glass Above the Softening Point

    C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

    C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

    C978 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

    C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

    C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

    C1002 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

    C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units

    C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1019 Standard Test Method for Sampling and Testing Grout

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1032 Standard Specification for Woven Wire Plaster Base

    C1036 Standard Specification for Flat Glass

    C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

    C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

    C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1059/C1059M Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

    C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

    C1089 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

    C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

    C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

    C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1141/C1141M Standard Specification for Admixtures for Shotcrete

    C1142 Standard Specification for Extended Life Mortar for Unit Masonry

    C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1167 Standard Specification for Clay Roof Tiles

    C1172 Standard Specification for Laminated Architectural Flat Glass

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

    C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

    C1180 Standard Terminology of Mortar and Grout for Unit Masonry

    C1184 Standard Specification for Structural Silicone Sealants

    C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

    C1186 Standard Specification for Flat Fiber-Cement Sheets

    C1193 Standard Guide for Use of Joint Sealants

    C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1195 Standard Test Method for Absorption of Architectural Cast Stone

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1201/C1201M Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1203 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1227 Standard Specification for Precast Concrete Septic Tanks

    C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

    C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

    C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1256 Standard Practice for Interpreting Glass Fracture Surface Features

    C1261 Standard Specification for Firebox Brick for Residential Fireplaces

    C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

    C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

    C1272 Standard Specification for Heavy Vehicular Paving Brick

    C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel

    C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

    C1280 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1283 Standard Practice for Installing Clay Flue Lining

    C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane

    C1311 Standard Specification for Solvent Release Sealants

    C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications

    C1314 Standard Test Method for Compressive Strength of Masonry Prisms

    C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C1319 Standard Specification for Concrete Grid Paving Units

    C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

    C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

    C1324 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

    C1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

    C1350M Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)

    C1351M Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

    C1353/C1353M Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

    C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites

    C1357 Standard Test Methods for Evaluating Masonry Bond Strength

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1364 Standard Specification for Architectural Cast Stone

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1384 Standard Specification for Admixtures for Masonry Mortars

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1396/C1396M Standard Specification for Gypsum Board

    C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

    C1401 Standard Guide for Structural Sealant Glazing

    C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)

    C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass

    C1426 Standard Practices for Verification and Calibration of Polarimeters

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1436 Standard Specification for Materials for Shotcrete

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1443 Standard Specification for Glasses, Portlight, Circular, Fully Tempered

    C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

    C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1464 Standard Specification for Bent Glass

    C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

    C1471/C1471M Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1483/C1483M Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

    C1489 Standard Specification for Lime Putty for Structural Purposes

    C1491 Standard Specification for Concrete Roof Pavers

    C1492 Standard Specification for Concrete Roof Tile

    C1503 Standard Specification for Silvered Flat Glass Mirror

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1509 Standard Specification for Beaded Process Glass Pipe and Fittings

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    C1515 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

    C1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems

    C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1526 Standard Specification for Serpentine Dimension Stone

    C1527/C1527M Standard Specification for Travertine Dimension Stone

    C1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

    C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

    C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1586 Standard Guide for Quality Assurance of Mortars

    C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

    C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1621/C1621M Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

    C1623 Standard Specification for Manufactured Concrete Masonry Lintels

    C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

    C1634 Standard Specification for Concrete Facing Brick

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    C1648 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass

    C1649 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

    C1650 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

    C1651 Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass

    C1652/C1652M Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids

    C1658/C1658M Standard Specification for Glass Mat Gypsum Panels

    C1660 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

    C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

    C1686 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

    C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

    C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1694 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

    C1701/C1701M Standard Test Method for Infiltration Rate of In Place Pervious Concrete

    C1704/C1704M Standard Test Method for Sampling and Testing Structural Cementitious Panels

    C1705/C1705M Standard Specification for Structural Cementitious Panels

    C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1713 Standard Specification for Mortars for the Repair of Historic Masonry

    C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

    C1719 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

    C1745/C1745M Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1746/C1746M Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1766 Standard Specification for Factory-Laminated Gypsum Panel Products

    C1787 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1788 Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1789 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels

    C1804 Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D9 Standard Terminology Relating to Wood and Wood-Based Products

    D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

    D25 Standard Specification for Round Timber Piles

    D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D41/D41M Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

    D43/D43M Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D75/D75M Standard Practice for Sampling Aggregates

    D76/D76M Standard Specification for Tensile Testing Machines for Textiles

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D97 Standard Test Method for Pour Point of Petroleum Products

    D113 Standard Test Method for Ductility of Bituminous Materials

    D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D140/D140M Standard Practice for Sampling Bituminous Materials

    D143 Standard Test Methods for Small Clear Specimens of Timber

    D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

    D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

    D187 Standard Test Method for Burning Quality of Kerosine

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D204 Standard Test Methods for Sewing Threads

    D217 Standard Test Methods for Cone Penetration of Lubricating Grease

    D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

    D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

    D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D229 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D242/D242M Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D312 Standard Specification for Asphalt Used in Roofing

    D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D348 Standard Test Methods for Rigid Tubes Used for Electrical Insulation

    D350 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

    D360 Standard Specification for Shellac Varnishes

    D380 Standard Test Methods for Rubber Hose

    D395 Standard Test Methods for Rubber Property—Compression Set

    D396 Standard Specification for Fuel Oils

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

    D422 Standard Test Method for Particle-Size Analysis of Soils

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D449/D449M Standard Specification for Asphalt Used in Dampproofing and Waterproofing

    D450/D450M Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

    D451/D451M Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

    D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D523 Standard Test Method for Specular Gloss

    D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D570 Standard Test Method for Water Absorption of Plastics

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D578/D578M Standard Specification for Glass Fiber Strands

    D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

    D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

    D618 Standard Practice for Conditioning Plastics for Testing

    D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D638 Standard Test Method for Tensile Properties of Plastics

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D668 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

    D692/D692M Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D709 Standard Specification for Laminated Thermosetting Materials

    D714 Standard Test Method for Evaluating Degree of Blistering of Paints

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D737 Standard Test Method for Air Permeability of Textile Fabrics

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D751 Standard Test Methods for Coated Fabrics

    D769 Standard Specification for Black Synthetic Iron Oxide

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D816 Standard Test Methods for Rubber Cements

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D841 Standard Specification for Nitration Grade Toluene

    D843 Standard Specification for Nitration Grade Xylene

    D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

    D848 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

    D852 Standard Test Method for Solidification Point of Benzene

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D858 Standard Test Methods for Manganese in Water

    D859 Standard Test Method for Silica in Water

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D877/D877M Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

    D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D923 Standard Practices for Sampling Electrical Insulating Liquids

    D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

    D946/D946M Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

    D950 Standard Test Method for Impact Strength of Adhesive Bonds

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D971 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration

    D975 Standard Specification for Diesel Fuel Oils

    D977 Standard Specification for Emulsified Asphalt

    D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures

    D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

    D996 Standard Terminology of Packaging and Distribution Environments

    D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

    D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    D1042 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1066 Standard Practice for Sampling Steam

    D1067 Standard Test Methods for Acidity or Alkalinity of Water

    D1068 Standard Test Methods for Iron in Water

    D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1079 Standard Terminology Relating to Roofing and Waterproofing

    D1126 Standard Test Method for Hardness in Water

    D1129 Standard Terminology Relating to Water

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1141 Standard Practice for the Preparation of Substitute Ocean Water

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

    D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D1193 Standard Specification for Reagent Water

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

    D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1253 Standard Test Method for Residual Chlorine in Water

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

    D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

    D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents

    D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

    D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)

    D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

    D1414 Standard Test Methods for Rubber O-Rings

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature

    D1429 Standard Test Methods for Specific Gravity of Water and Brine

    D1434 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

    D1435 Standard Practice for Outdoor Weathering of Plastics

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1524 Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

    D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

    D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

    D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

    D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

    D1600 Standard Terminology for Abbreviated Terms Relating to Plastics

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622/D1622M Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1644 Standard Test Methods for Nonvolatile Content of Varnishes

    D1652 Standard Test Method for Epoxy Content of Epoxy Resins

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1668/D1668M Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

    D1676 Standard Test Methods for Film-Insulated Magnet Wire

    D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics

    D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D1754/D1754M Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D1761 Standard Test Methods for Mechanical Fasteners in Wood

    D1777 Standard Test Method for Thickness of Textile Materials

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1816 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

    D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1929 Standard Test Method for Determining Ignition Temperature of Plastics

    D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

    D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    D1998 Standard Specification for Polyethylene Upright Storage Tanks

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

    D2050 Standard Terminology Relating to Fasteners and Closures Used with Textiles

    D2061 Standard Test Methods for Strength Tests for Zippers

    D2062 Standard Test Methods for Operability of Zippers

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2103 Standard Specification for Polyethylene Film and Sheeting

    D2105 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2119 Standard Test Method for Aldehydes in Styrene Monomer

    D2121 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)

    D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

    D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2132 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

    D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2232 Test Method for Evaporation Residue of Naphthalene

    D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

    D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

    D2275 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

    D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2290 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

    D2307 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2340 Standard Test Method for Peroxides in Styrene Monomer

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D2359 Standard Specification for Refined Benzene-535

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D2369 Standard Test Method for Volatile Content of Coatings

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

    D2397/D2397M Standard Specification for Cationic Emulsified Asphalt

    D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)

    D2439 Standard Specification for Refined Phenol

    D2444 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    D2464 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

    D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2472 Standard Specification for Sulfur Hexafluoride

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D2561 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

    D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

    D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings

    D2657 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

    D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

    D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D2737 Standard Specification for Polyethylene (PE) Plastic Tubing

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing

    D2824/D2824M Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

    D2827 Standard Specification for Styrene Monomer

    D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

    D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    D2860/D2860M Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2996 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3005 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

    D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

    D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

    D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

    D3045 Standard Practice for Heat Aging of Plastics Without Load

    D3122 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

    D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

    D3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    D3141/D3141M Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

    D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)

    D3161/D3161M Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

    D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

    D3170/D3170M Standard Test Method for Chipping Resistance of Coatings

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3193 Standard Specification for Ethylbenzene

    D3195/D3195M Standard Practice for Rotameter Calibration

    D3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles

    D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

    D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3251 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

    D3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

    D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

    D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

    D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

    D3345 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D3370 Standard Practices for Sampling Water from Closed Conduits

    D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products

    D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3597 Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked

    D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

    D3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

    D3638 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

    D3654/D3654M Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

    D3656/D3656M Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns

    D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3690 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor

    D3699 Standard Specification for Kerosine

    D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

    D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

    D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3759/D3759M Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric

    D3786/D3786M Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method

    D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test

    D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3805/D3805M Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

    D3852 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

    D3864 Standard Guide for On-Line Monitoring Systems for Water Analysis

    D3874 Standard Test Method for Ignition of Materials by Hot Wire Sources

    D3884 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D3902 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

    D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

    D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4073 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

    D4077 Standard Specification for Cumene (Isopropylbenzene)

    D4078 Standard Specification for Water Emulsion Floor Polish

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

    D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

    D4158 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

    D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4258 Standard Practice for Surface Cleaning Concrete for Coating

    D4259 Standard Practice for Abrading Concrete

    D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete

    D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

    D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

    D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

    D4297 Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4355/D4355M Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4388 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

    D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D4402/D4402M Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

    D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

    D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes

    D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

    D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

    D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4479/D4479M Standard Specification for Asphalt Roof Coatings - Asbestos-Free

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents

    D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4586/D4586M Standard Specification for Asphalt Roof Cement, Asbestos-Free

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

    D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

    D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4728 Standard Test Method for Random Vibration Testing of Shipping Containers

    D4734 Standard Specification for Refined Benzene-545

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

    D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile

    D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics

    D4789 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals

    D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4829 Standard Test Method for Expansion Index of Soils

    D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D4840 Standard Guide for Sampling Chain-of-Custody Procedures

    D4851 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

    D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

    D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

    D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

    D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4972 Standard Test Method for pH of Soils

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D4977/D4977M Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

    D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

    D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

    D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

    D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

    D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D5136 Standard Specification for High Purity p-Xylene

    D5149 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

    D5156 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

    D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

    D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

    D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5207 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5210 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5211 Standard Specification for Xylenes for p-Xylene Feedstock

    D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles

    D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5295/D5295M Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

    D5309 Standard Specification for Cyclohexane 999

    D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5321/D5321M Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

    D5359 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

    D5374 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

    D5385/D5385M Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5391 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5421 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5423 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

    D5456 Standard Specification for Evaluation of Structural Composite Lumber Products

    D5464 Standard Test Method for pH Measurement of Water of Low Conductivity

    D5466 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

    D5469/D5469M Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

    D5471 Standard Specification for O-Xylene 980

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5505 Standard Practice for Classifying Emulsified Recycling Agents

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

    D5539 Standard Specification for Seed Starter Mix

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

    D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

    D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

    D5642 Standard Test Method for Sealed Tube Chemical Compatibility Test

    D5643/D5643M Standard Specification for Coal Tar Roof Cement, Asbestos Free

    D5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard

    D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

    D5665/D5665M Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5685 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

    D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

    D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

    D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D5843/D5843M Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

    D5851 Standard Guide for Planning and Implementing a Water Monitoring Program

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

    D5871 Standard Specification for Benzene for Cyclohexane Feedstock

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

    D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

    D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations

    D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane

    D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6046 Standard Classification of Hydraulic Fluids for Environmental Impact

    D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

    D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

    D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

    D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

    D6117 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

    D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

    D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6196 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

    D6221/D6221M Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

    D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

    D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications

    D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

    D6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

    D6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

    D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

    D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

    D6367 Standard Specification for AMS (α-Methylstyrene)

    D6370 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)

    D6380/D6380M Standard Specification for Asphalt Roll Roofing (Organic Felt)

    D6381/D6381M Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing

    D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D6621 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

    D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion

    D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

    D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

    D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

    D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

    D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

    D6694/D6694M Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

    D6698 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

    D6705/D6705M Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

    D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

    D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6753/D6753M Standard Specification for Coal Tar Adhesive

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

    D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

    D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

    D6830 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

    D6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

    D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

    D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6871 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

    D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

    D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

    D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

    D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

    D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

    D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

    D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts

    D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

    D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

    D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair

    D7254 Standard Specification for Polypropylene (PP) Siding

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales

    D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

    D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

    D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7400 Standard Test Methods for Downhole Seismic Testing

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7611/D7611M Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

    D7612 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources

    D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    E1 Standard Specification for ASTM Liquid-in-Glass Thermometers

    E3 Standard Guide for Preparation of Metallographic Specimens

    E4 Standard Practices for Force Verification of Testing Machines

    E6 Standard Terminology Relating to Methods of Mechanical Testing

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E11 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

    E28 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

    E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

    E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E77 Standard Test Method for Inspection and Verification of Thermometers

    E83 Standard Practice for Verification and Classification of Extensometer Systems

    E84 Standard Test Method for Surface Burning Characteristics of Building Materials

    E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    E94 Standard Guide for Radiographic Examination

    E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

    E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

    E105 Standard Practice for Probability Sampling Of Materials

    E108 Standard Test Methods for Fire Tests of Roof Coverings

    E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E119 Standard Test Methods for Fire Tests of Building Construction and Materials

    E122 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E132 Standard Test Method for Poisson's Ratio at Room Temperature

    E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

    E143 Standard Test Method for Shear Modulus at Room Temperature

    E145 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens

    E154/E154M Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E161 Standard Specification for Precision Electroformed Sieves

    E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E176 Standard Terminology of Fire Standards

    E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E178 Standard Practice for Dealing With Outlying Observations

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E190 Standard Test Method for Guided Bend Test for Ductility of Welds

    E208 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

    E209 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

    E230/E230M Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

    E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

    E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E290 Standard Test Methods for Bend Testing of Material for Ductility

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

    E323 Standard Specification for Perforated-Plate Sieves for Testing Purposes

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E330/E330M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E405 Standard Test Methods for Wear Testing Rotary Operators for Windows

    E408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

    E413 Classification for Rating Sound Insulation

    E448 Standard Practice for Scleroscope Hardness Testing of Metallic Materials

    E454 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)

    E456 Standard Terminology Relating to Quality and Statistics

    E477 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

    E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E543 Standard Specification for Agencies Performing Nondestructive Testing

    E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

    E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E557 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

    E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

    E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

    E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

    E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

    E604 Standard Test Method for Dynamic Tear Testing of Metallic Materials

    E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

    E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

    E659 Standard Test Method for Autoignition Temperature of Liquid Chemicals

    E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

    E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

    E674 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)

    E681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

    E683 Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings

    E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    E695 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

    E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

    E709 Standard Guide for Magnetic Particle Testing

    E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

    E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

    E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

    E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

    E781 Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates

    E782 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode

    E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

    E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests

    E799 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis

    E814 Standard Test Method for Fire Tests of Penetration Firestop Systems

    E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

    E837 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

    E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

    E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

    E873 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels

    E881 Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode

    E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

    E903 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

    E906/E906M Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

    E915 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

    E927 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing

    E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

    E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E948 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

    E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements

    E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    E985 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings

    E987 Standard Test Methods for Deglazing Force of Fenestration Products

    E996 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

    E997 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

    E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

    E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

    E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

    E1021 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1036 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells

    E1038 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls

    E1040 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells

    E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

    E1110 Standard Classification for Determination of Articulation Class

    E1111 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

    E1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1142 Standard Terminology Relating to Thermophysical Properties

    E1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

    E1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)

    E1169 Standard Practice for Conducting Ruggedness Tests

    E1171 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

    E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

    E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

    E1233/E1233M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

    E1237 Standard Guide for Installing Bonded Resistance Strain Gages

    E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

    E1260 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments

    E1264 Standard Classification for Acoustical Ceiling Products

    E1300 Standard Practice for Determining Load Resistance of Glass in Buildings

    E1319 Standard Guide for High-Temperature Static Strain Measurement

    E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

    E1325 Standard Terminology Relating to Design of Experiments

    E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation

    E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

    E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

    E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

    E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

    E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

    E1355 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1362 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

    E1399/E1399M Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

    E1402 Standard Guide for Sampling Design

    E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

    E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

    E1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

    E1426 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress

    E1444/E1444M Standard Practice for Magnetic Particle Testing

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1458 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles

    E1462 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules

    E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings

    E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

    E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

    E1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type

    E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors

    E1514 Standard Specification for Structural Standing Seam Steel Roof Panel Systems

    E1527 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process

    E1528 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process

    E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

    E1537 Standard Test Method for Fire Testing of Upholstered Furniture

    E1557 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II

    E1561 Standard Practice for Analysis of Strain Gage Rosette Data

    E1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

    E1590 Standard Test Method for Fire Testing of Mattresses

    E1591 Standard Guide for Obtaining Data for Fire Growth Models

    E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

    E1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments

    E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

    E1612/E1612M Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

    E1617 Standard Practice for Reporting Particle Size Characterization Data

    E1620 Standard Terminology Relating to Liquid Particles and Atomization

    E1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

    E1638 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media

    E1643 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

    E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

    E1677 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

    E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems

    E1685 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

    E1686 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

    E1690 Standard Test Method for Determination of Ethanol Extractives in Biomass

    E1721 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

    E1725 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

    E1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

    E1755 Standard Test Method for Ash in Biomass

    E1758 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

    E1780 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

    E1783/E1783M Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

    E1799 Standard Practice for Visual Inspections of Photovoltaic Modules

    E1802 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules

    E1821 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

    E1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

    E1830 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules

    E1856 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

    E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

    E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

    E1876 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

    E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

    E1903 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process

    E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

    E1928 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

    E1949 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

    E1966 Standard Test Method for Fire-Resistive Joint Systems

    E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings

    E1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces

    E1993/E1993M Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

    E1994 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

    E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

    E2016 Standard Specification for Industrial Woven Wire Cloth

    E2030 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings

    E2047 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays

    E2067 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

    E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

    E2098/E2098M Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

    E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)

    E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

    E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings

    E2128 Standard Guide for Evaluating Water Leakage of Building Walls

    E2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products

    E2140 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

    E2173 Standard Guide for Disclosure of Environmental Liabilities

    E2174 Standard Practice for On-Site Inspection of Installed Firestops

    E2178 Standard Test Method for Air Permeance of Building Materials

    E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation

    E2218 Standard Test Method for Determining Forming Limit Curves

    E2226 Standard Practice for Application of Hose Stream

    E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

    E2234 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL

    E2238 Standard Guide for Evacuation Route Diagrams

    E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

    E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

    E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

    E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

    E2280 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

    E2281 Standard Practice for Process and Measurement Capability Indices

    E2282 Standard Guide for Defining the Test Result of a Test Method

    E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

    E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

    E2309/E2309M Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

    E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

    E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

    E2348 Standard Guide for Framework for a Consensus-based Environmental Decision-making Process

    E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

    E2359/E2359M Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

    E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

    E2396 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems

    E2397 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems

    E2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems

    E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems

    E2400 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems

    E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact

    E2427 Standard Test Method for Acceptance by Performance Testing for Sieves

    E2428 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines

    E2432 Standard Guide for General Principles of Sustainability Relative to Buildings

    E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

    E2484 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices

    E2485/E2485M Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings

    E2486/E2486M Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

    E2489 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

    E2492 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test

    E2511 Standard Guide for Detailing of EIFS-Clad Wall Assemblies

    E2513 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

    E2527 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight

    E2546 Standard Practice for Instrumented Indentation Testing

    E2554 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques

    E2555 Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection

    E2568 Standard Specification for PB Exterior Insulation and Finish Systems

    E2570/E2570M Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

    E2573 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

    E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

    E2586 Standard Practice for Calculating and Using Basic Statistics

    E2587 Standard Practice for Use of Control Charts in Statistical Process Control

    E2589 Standard Terminology Relating to Nonsieving Methods of Powder Characterization

    E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

    E2600 Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions

    E2624 Standard Practice for Torque Calibration of Testing Machines and Devices

    E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

    E2635 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation

    E2651 Standard Guide for Powder Particle Size Analysis

    E2652 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

    E2655 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

    E2658 Standard Practices for Verification of Speed for Material Testing Machines

    E2692 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

    E2696 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution

    E2709 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure

    E2712 Standard Test Methods for Forming Superplastic Metallic Sheet

    E2727 Standard Practice for Assessment of Rainwater Quality

    E2762 Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL

    E2782 Standard Guide for Measurement Systems Analysis (MSA)

    E2788 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems

    E2814 Standard Guide for Industrial Woven Wire Filter Cloth

    E2819 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL

    E2860 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels

    E2872 Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus

    E2910 Standard Guide for Preferred Methods for Acceptance of Product

    E2935 Standard Practice for Conducting Equivalence Testing in Laboratory Applications

    F14 Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal

    F36 Standard Test Method for Compressibility and Recovery of Gasket Materials

    F37 Standard Test Methods for Sealability of Gasket Materials

    F79 Standard Specification for Type 101 Sealing Glass

    F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials

    F105 Standard Specification for Type 58 Borosilicate Sealing Glass

    F140 Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

    F144 Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

    F146 Standard Test Methods for Fluid Resistance of Gasket Materials

    F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

    F218 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

    F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

    F402 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

    F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

    F409 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

    F436 Standard Specification for Hardened Steel Washers

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F437 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F438 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

    F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

    F442/F442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

    F444 Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas

    F445 Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas

    F446 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

    F449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

    F462 Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities

    F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

    F481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

    F493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

    F510/F510M Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

    F512 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

    F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F567 Standard Practice for Installation of Chain-Link Fence

    F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F626 Standard Specification for Fence Fittings

    F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

    F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

    F654 Standard Specification for Residential Chain Link Fence Gates

    F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

    F667 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F693 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

    F708 Standard Practice for Design and Installation of Rigid Pipe Hangers

    F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

    F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F793 Standard Classification of Wall Covering by Use Characteristics

    F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

    F834 Standard Consumer Safety Specification for Toy Chests

    F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F837 Standard Specification for Stainless Steel Socket Head Cap Screws

    F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F851 Standard Test Method for Self-Rising Seat Mechanisms

    F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing

    F877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

    F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F883 Standard Performance Specification for Padlocks

    F891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

    F894 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

    F900 Standard Specification for Industrial and Commercial Swing Gates

    F903 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

    F904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

    F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

    F949 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

    F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

    F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F963 Standard Consumer Safety Specification for Toy Safety

    F969 Standard Practice for Construction of Chain-Link Tennis Court Fence

    F970 Standard Test Method for Static Load Limit

    F976 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use

    F1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

    F1060 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

    F1066 Standard Specification for Vinyl Composition Floor Tile

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1090 Standard Classification for Bank and Mercantile Vault Construction

    F1105 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

    F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

    F1123 Standard Specification for Non-Metallic Expansion Joints

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1141 Standard Specification for Wallcovering

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1216 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

    F1233 Standard Test Method for Security Glazing Materials And Systems

    F1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

    F1267 Standard Specification for Metal, Expanded, Steel

    F1275 Standard Test Method for Performance of Griddles

    F1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

    F1282 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

    F1290 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

    F1292 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

    F1303 Standard Specification for Sheet Vinyl Floor Covering with Backing

    F1336 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1342/F1342M Standard Test Method for Protective Clothing Material Resistance to Puncture

    F1344 Standard Specification for Rubber Floor Tile

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1346 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

    F1361 Standard Test Method for Performance of Open Deep Fat Fryers

    F1379 Standard Terminology Relating to Barbed Tape

    F1412 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

    F1417 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

    F1427 Standard Consumer Safety Specification for Bunk Beds

    F1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

    F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)

    F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1484 Standard Test Methods for Performance of Steam Cookers

    F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

    F1488 Standard Specification for Coextruded Composite Pipe

    F1496 Standard Test Method for Performance of Convection Ovens

    F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

    F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

    F1521 Standard Test Methods for Performance of Range Tops

    F1545 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

    F1553 Standard Guide for Specifying Chain Link Fence

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1577 Standard Test Methods for Detention Locks for Swinging Doors

    F1578 Standard Test Method for Contact Closure Cycling of a Membrane Switch

    F1592 Standard Test Methods for Detention Hollow Metal Vision Systems

    F1595 Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

    F1596 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity

    F1598 Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

    F1605 Standard Test Method for Performance of Double-Sided Griddles

    F1637 Standard Practice for Safe Walking Surfaces

    F1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

    F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly

    F1647 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes

    F1661 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

    F1662 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

    F1663 Standard Test Method for Determining the Capacitance of a Membrane Switch

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe

    F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

    F1680 Standard Test Method for Determining Circuit Resistance of a Membrane Switch

    F1683 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component

    F1689 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

    F1695 Standard Test Method for Performance of Underfired Broilers

    F1696 Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines

    F1700 Standard Specification for Solid Vinyl Floor Tile

    F1704 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

    F1743 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F1758 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

    F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

    F1760 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

    F1762 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch

    F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F1812 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

    F1817 Standard Test Method for Performance of Conveyor Ovens

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing

    F1860 Standard Specification for Rubber Sheet Floor Covering With Backing

    F1861 Standard Specification for Resilient Wall Base

    F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

    F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

    F1870 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

    F1895 Standard Test Method for Submersion of a Membrane Switch

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F1911 Standard Practice for Installation of Barbed Tape

    F1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing

    F1915 Standard Test Methods for Glazing for Detention Facilities

    F1920 Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines

    F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

    F1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

    F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

    F1961 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

    F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

    F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

    F1974 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

    F1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

    F1995 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch

    F1996 Standard Test Method for Silver Migration for Membrane Switch Circuitry

    F2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows

    F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    F2034 Standard Specification for Sheet Linoleum Floor Covering

    F2055 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

    F2072 Standard Test Method for Hosedown of a Membrane Switch

    F2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment

    F2080 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe

    F2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms

    F2093 Standard Test Method for Performance of Rack Ovens

    F2098 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings

    F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

    F2140 Standard Test Method for Performance of Hot Food Holding Cabinets

    F2144 Standard Test Method for Performance of Large Open Vat Fryers

    F2158 Standard Specification for Residential Central-Vacuum Tube and Fittings

    F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F2165 Standard Specification for Flexible Pre-Insulated Piping

    F2169 Standard Specification for Resilient Stair Treads

    F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

    F2195 Standard Specification for Linoleum Floor Tile

    F2200 Standard Specification for Automated Vehicular Gate Construction

    F2206 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock

    F2208 Standard Safety Specification for Residential Pool Alarms

    F2233 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

    F2241 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft

    F2242 Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft

    F2243 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft

    F2244 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft

    F2245 Standard Specification for Design and Performance of a Light Sport Airplane

    F2262 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9

    F2285 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use

    F2295 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft

    F2303 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

    F2304 Standard Practice for Sealing of Sewers Using Chemical Grouting

    F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

    F2316 Standard Specification for Airframe Emergency Parachutes

    F2317/F2317M Standard Specification for Design of Weight-Shift-Control Aircraft

    F2324 Standard Test Method for Prerinse Spray Valves

    F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2339 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft

    F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems

    F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

    F2352 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft

    F2354 Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft

    F2355 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft

    F2356 Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft

    F2380 Standard Test Method for Performance of Conveyor Toasters

    F2387 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs

    F2389 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

    F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2414 Standard Practice for Sealing Sewer Manholes Using Chemical Grouting

    F2415 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft

    F2425 Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft

    F2426 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft

    F2427 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft

    F2434 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing

    F2447 Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft

    F2454 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting

    F2457 Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft

    F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

    F2483 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft

    F2506 Standard Specification for Design and Testing of Light Sport Aircraft Propellers

    F2507 Standard Specification for Recreational Airpark Design

    F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F2519 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

    F2538 Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft

    F2550 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall

    F2551 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes

    F2563 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation

    F2564 Standard Specification for Design and Performance of a Light Sport Glider

    F2592 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

    F2611 Standard Guide for Design and Construction of Chain Link Security Fencing

    F2623 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

    F2626 Standard Terminology for Light Sport Aircraft

    F2656 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers

    F2735 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

    F2745 Standard Specification for Required Product Information to be Provided with an Airplane

    F2746 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane

    F2769 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

    F2831 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

    F2839 Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft

    F2840 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft

    F2861 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes

    F2930 Standard Guide for Compliance with Light Sport Aircraft Standards

    F2972 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System

    F3035 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft

    F3079 Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities

    F3080 Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector and CCTV Camera System

    F3092 Standard Terminology Relating to Optical Fiber Sensing Systems

    F3095 Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System

    G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

    G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

    G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    G62 Standard Test Methods for Holiday Detection in Pipeline Coatings

    G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

    G87 Standard Practice for Conducting Moist SO2 Tests

    G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

    G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

    G166 Standard Guide for Statistical Analysis of Service Life Data

    G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data

    G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface

    Product Profile
    Get the tools you need to design and construct buildings that satisfy the international code requirements established by the International Code Council (ICC).

    Over 2,000 ASTM construction standards compiled from the Annual Book of ASTM Standards, enable you to:
    • Meet international code requirements
    • Stay informed and remain competitive
    • Specify the right material for the job

    Provides easy access to most of the LATEST VERSIONS of the ASTM standards referenced by:
    • The International Codes published by ICC®
    • National Building Code of Canada?National Research Council Canada
    • Uniform Plumbing Code and Uniform Mechanical Code?International Assn. of Plumbing and Mechanical Officials
    • MASTERSPEC®
    • BSD SpecLink®
    • NFPA5000®?Building Construction and Safety Code®
    • SPECTEXT® Master Guide Specifications
    • Green Standards: (Federal Green Construction Guide for Specifiers, International Green Construction Code (IgCC), Green Globes®)
    • American Welding Society: Structural Welding Code D1.1/D1M:2010
    • UL Global Standards
    • National Roofing Contractors Association (NRCA)

    Available DVD Options:
    Building Codes; Basic
    Building Codes; Basic with updates
    Building Codes; Network version, Basic with updates

    Basic allows access to active standards only; Plus allows access to active, redlined, historical, and withdrawn standards.

    System Requirements:
    PC (running Windows® 98 or later) equipped with a DVD drive and a minimum or 200 MB free hard disk space, an up-to-date Web browser, and Adobe Acrobat Reader (supplied).