ASTM Standards Source (Online):
    ASTM Standards Source®


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    AIIMASTM Portable Document Format-Healthcare (PDF) A Best Practices Guide

    A1 Standard Specification for Carbon Steel Tee Rails

    A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A34/A34M Standard Practice for Sampling and Procurement Testing of Magnetic Materials

    A36/A36M Standard Specification for Carbon Structural Steel

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A65 Standard Specification for Steel Track Spikes

    A66 Standard Specification for Steel Screw Spikes

    A67 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A74 Standard Specification for Cast Iron Soil Pipe and Fittings

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A99 Standard Specification for Ferromanganese

    A100 Standard Specification for Ferrosilicon

    A101 Standard Specification for Ferrochromium

    A102 Standard Specification for Ferrovanadium

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A111 Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A125 Standard Specification for Steel Springs, Helical, Heat-Treated

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A128/A128M Standard Specification for Steel Castings, Austenitic Manganese

    A131/A131M Standard Specification for Structural Steel for Ships

    A132 Standard Specification for Ferromolybdenum

    A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A144 Specification for Ferrotungsten

    A146 Standard Specification for Molybdenum Oxide Products

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A159 Standard Specification for Automotive Gray Iron Castings

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A197/A197M Standard Specification for Cupola Malleable Iron

    A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A220/A220M Standard Specification for Pearlitic Malleable Iron

    A225/A225M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A255 Standard Test Methods for Determining Hardenability of Steel

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A263 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A299/A299M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

    A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

    A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A319 Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A322 Standard Specification for Steel Bars, Alloy, Standard Grades

    A323 Standard Specification for Ferroboron

    A324 Standard Specification for Ferrotitanium

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A327/A327M Standard Test Methods for Impact Testing of Cast Irons

    A328/A328M Standard Specification for Steel Sheet Piling

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A338 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)

    A340 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

    A341/A341M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

    A342/A342M Standard Test Methods for Permeability of Weakly Magnetic Materials

    A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

    A345 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

    A348/A348M Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

    A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A353/A353M Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A355 Standard Specification for Steel Bars, Alloys, for Nitriding

    A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A363 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

    A367 Standard Test Methods of Chill Testing of Cast Iron

    A368 Standard Specification for Stainless Steel Wire Strand

    A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A384/A384M Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

    A385/A385M Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

    A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A388/A388M Standard Practice for Ultrasonic Examination of Steel Forgings

    A389/A389M Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A400 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A413/A413M Standard Specification for Carbon Steel Chain

    A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A418/A418M Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

    A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A423/A423M Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

    A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A436 Standard Specification for Austenitic Gray Iron Castings

    A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

    A439 Standard Specification for Austenitic Ductile Iron Castings

    A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    A455/A455M Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

    A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape

    A460 Standard Specification for Copper-Clad Steel Wire Strand

    A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A466/A466M Standard Specification for Weldless Chain

    A467/A467M Standard Specification for Machine and Coil Chain

    A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A472/A472M Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

    A473 Standard Specification for Stainless Steel Forgings

    A474 Standard Specification for Aluminum-Coated Steel Wire Strand

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A481 Standard Specification for Chromium Metal

    A482/A482M Standard Specification for Ferrochrome-Silicon

    A483/A483M Standard Specification for Silicomanganese

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A485 Standard Specification for High Hardenability Antifriction Bearing Steel

    A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A492 Standard Specification for Stainless Steel Rope Wire

    A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A495 Standard Specification for Calcium-Silicon Alloys

    A498/A498M Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A502 Standard Specification for Rivets, Steel, Structural

    A503/A503M Standard Specification for Ultrasonic Examination of Forged Crankshafts

    A504/A504M Standard Specification for Wrought Carbon Steel Wheels

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A511/A511M Standard Specification for Seamless Stainless Steel Mechanical Tubing

    A512 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A522/A522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

    A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A531/A531M Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A533/A533M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A534 Standard Specification for Carburizing Steels for Anti-Friction Bearings

    A536 Standard Specification for Ductile Iron Castings

    A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications

    A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A550 Standard Specification for Ferrocolumbium

    A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A553/A553M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A556/A556M Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

    A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy

    A561 Standard Practice for Macroetch Testing of Tool Steel Bars

    A562/A562M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A577/A577M Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

    A580/A580M Standard Specification for Stainless Steel Wire

    A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A596/A596M Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

    A597 Standard Specification for Cast Tool Steel

    A598/A598M Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

    A599/A599M Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

    A600 Standard Specification for Tool Steel High Speed

    A601/A601M Standard Specification for Electrolytic Manganese Metal

    A602 Standard Specification for Automotive Malleable Iron Castings

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A604/A604M Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A609/A609M Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

    A610 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A612/A612M Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A623 Standard Specification for Tin Mill Products, General Requirements

    A623M Standard Specification for Tin Mill Products, General Requirements [Metric]

    A624/A624M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

    A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

    A626/A626M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

    A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

    A630 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

    A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A636 Standard Specification for Nickel Oxide Sinter

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A640 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

    A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

    A644 Standard Terminology Relating to Iron Castings

    A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A650/A650M Standard Specification for Tin Mill Products, Black Plate, Double Reduced

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A657/A657M Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

    A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A660/A660M Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

    A662/A662M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A663/A663M Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

    A664 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A667/A667M Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A677 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A681 Standard Specification for Tool Steels Alloy

    A683 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A686 Standard Specification for Tool Steel, Carbon

    A688/A688M Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A689 Standard Specification for Carbon and Alloy Steel Bars for Springs

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A694/A694M Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

    A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

    A697/A697M Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

    A698/A698M Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

    A701/A701M Standard Specification for Ferromanganese-Silicon

    A702 Standard Specification for Steel Fence Posts, Hot Wrought

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A707/A707M Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A711/A711M Standard Specification for Steel Forging Stock

    A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A716 Standard Specification for Ductile Iron Culvert Pipe

    A717/A717M Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

    A719/A719M Standard Test Method for Lamination Factor of Magnetic Materials

    A720/A720M Standard Test Method for Ductility of Nonoriented Electrical Steel

    A721/A721M Standard Test Method for Ductility of Oriented Electrical Steel

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A724/A724M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

    A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

    A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A729/A729M Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A732/A732M Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

    A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A734/A734M Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

    A735/A735M Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

    A736/A736M Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel

    A737/A737M Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

    A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A745/A745M Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

    A746 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A747/A747M Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A748/A748M Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

    A754/A754M Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A756 Standard Specification for Stainless Anti-Friction Bearing Steel

    A757/A757M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A758/A758M Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

    A759 Standard Specification for Carbon Steel Crane Rails

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A772/A772M Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

    A773/A773M Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs

    A774/A774M Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A787/A787M Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A799/A799M Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

    A800/A800M Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

    A801 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

    A802/A802M Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A803/A803M Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

    A804/A804M Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A811 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A827/A827M Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M Standard Specification for Alloy Structural Steel Plates

    A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A832/A832M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A836/A836M Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

    A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

    A839 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

    A841/A841M Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A842 Standard Specification for Compacted Graphite Iron Castings

    A844/A844M Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A848 Standard Specification for Low-Carbon Magnetic Iron

    A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A855/A855M Standard Specification for Zinc-5?% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

    A856/A856M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A858/A858M Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

    A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A860/A860M Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

    A861 Standard Specification for High-Silicon Iron Pipe and Fittings

    A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A866 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

    A867 Standard Specification for Iron-Silicon Relay Steels

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process

    A876 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A889/A889M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A892 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

    A893/A893M Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

    A894/A894M Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A896/A896M Standard Practice for Conducting Case Studies on Galvanized Structures

    A897/A897M Standard Specification for Austempered Ductile Iron Castings

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A899 Standard Specification for Steel Wire, Epoxy-Coated

    A900/A900M Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

    A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

    A902 Standard Terminology Relating to Metallic Coated Steel Products

    A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

    A904 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts

    A905 Standard Specification for Steel Wire, Pressure Vessel Winding

    A906/A906M Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

    A908 Standard Specification for Stainless Steel Needle Tubing

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A910/A910M Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A912/A912M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A914/A914M Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

    A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A917 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

    A918 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A920/A920M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

    A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

    A922 Standard Specification for Silicon Metal

    A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A925 Standard Specification for Zinc-5?% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

    A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

    A927/A927M Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

    A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

    A932/A932M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

    A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A937/A937M Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

    A938 Standard Test Method for Torsion Testing of Wire

    A939/A939M Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A942/A942M Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

    A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A956 Standard Test Method for Leeb Hardness Testing of Steel Products

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A964/A964M Standard Specification for Corrugated Steel Box Culverts

    A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A971/A971M Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

    A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

    A973/A973M Standard Specification for Grade 100 Alloy Steel Chain

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    A976 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

    A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

    A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

    A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    A980/A980M Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A987/A987M Standard Practice for Measuring Shape Characteristics of Tin Mill Products

    A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A990/A990M Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

    A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

    A992/A992M Standard Specification for Structural Steel Shapes

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A995/A995M Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A997 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

    A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1001 Standard Specification for High Strength Steel Castings in Heavy Sections

    A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

    A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

    A1007 Standard Specification for Carbon Steel Wire for Wire Rope

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1009 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications

    A1010/A1010M Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1012 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

    A1013 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

    A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

    A1015 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1020/A1020M Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

    A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

    A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1025/A1025M Standard Specification for Ferroalloys, General Requirements

    A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1030/A1030M Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

    A1033 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1036 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

    A1037/A1037M Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

    A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1046/A1046M Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

    A1047/A1047M Standard Test Method for Pneumatic Leak Testing of Tubing

    A1048/A1048M Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

    A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A1059/A1059M Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

    A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand

    A1062 Standard Specification for Steel Castings Sampling

    A1063/A1063M Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1065/A1065M Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

    A1066/A1066M Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    A1067/A1067M Standard Specification for Test Coupons for Steel Castings

    A1068 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A1071/A1071M Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys

    A1072/A1072M Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

    A1073/A1073M Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet

    A1074 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

    A1075 Standard Specification for Flanged Steel U-Channel Posts

    A1076/A1076M Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A1078/A1078M Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

    A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A1080 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    A1082/A1082M Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

    A1083/A1083M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1084 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

    A1087/A1087M Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

    A1088 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A1089/A1089M Standard Specification for Highly Loaded Anti-Friction Bearing Steel

    A1090/A1090M Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance

    B1 Standard Specification for Hard-Drawn Copper Wire

    B2 Standard Specification for Medium-Hard-Drawn Copper Wire

    B3 Standard Specification for Soft or Annealed Copper Wire

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

    B6 Standard Specification for Zinc

    B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

    B9 Standard Specification for Bronze Trolley Wire

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as Babbitt Metal)

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B29 Standard Specification for Refined Lead

    B30 Standard Specification for Copper Alloys in Ingot Form

    B32 Standard Specification for Solder Metal

    B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

    B39 Standard Specification for Nickel

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B47 Standard Specification for Copper Trolley Wire

    B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

    B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B63 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

    B66 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

    B67 Standard Specification for Car and Tender Journal Bearings, Lined

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B70 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

    B75/B75M Standard Specification for Seamless Copper Tube

    B76 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

    B77 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

    B78 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

    B80 Standard Specification for Magnesium-Alloy Sand Castings

    B84 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B88 Standard Specification for Seamless Copper Water Tube

    B90/B90M Standard Specification for Magnesium-Alloy Sheet and Plate

    B91 Standard Specification for Magnesium-Alloy  Forgings

    B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting

    B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    B94 Standard Specification for Magnesium-Alloy Die Castings

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

    B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B106 Standard Test Methods for Flexivity of Thermostat Metals

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B114 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

    B115 Standard Specification for Electrolytic Copper Cathode

    B116 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B134/B134M Standard Specification for Brass Wire

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B136 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

    B137 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B160 Standard Specification for Nickel Rod and Bar

    B161 Standard Specification for Nickel Seamless Pipe and Tube

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

    B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

    B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

    B176 Standard Specification for Copper-Alloy Die Castings

    B177/B177M Standard Guide for Engineering Chromium Electroplating

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

    B193 Standard Test Method for Resistivity of Electrical Conductor Materials

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B200 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B208 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B215 Standard Practices for Sampling Metal Powders

    B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

    B224 Standard Classification of Coppers

    B226 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors

    B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B229 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B237 Standard Specification for Refined Antimony

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating

    B243 Standard Terminology of Powder Metallurgy

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B246 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B252 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

    B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating

    B254 Standard Practice for Preparation of and Electroplating on Stainless Steel

    B258 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

    B263/B263M Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B267 Standard Specification for Wire for Use In Wire-Wound Resistors

    B271/B271M Standard Specification for Copper-Base Alloy Centrifugal Castings

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought

    B276 Standard Test Method for Apparent Porosity in Cemented Carbides

    B277 Standard Test Method for Hardness of Electrical Contact Materials

    B279 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B281 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

    B294 Standard Test Method for Hardness Testing of Cemented Carbides

    B296 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

    B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

    B299 Standard Specification for Titanium Sponge

    B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B319 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating

    B320 Standard Practice for Preparation of Iron Castings for Electroplating

    B322 Standard Guide for Cleaning Metals Prior to Electroplating

    B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

    B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

    B329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B339 Standard Specification for Pig Tin

    B343 Standard Practice for Preparation of Nickel for Electroplating with Nickel

    B344 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B349/B349M Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

    B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

    B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

    B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

    B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

    B354 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

    B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

    B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

    B362 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

    B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

    B364 Standard Specification for Tantalum and Tantalum Alloy Ingots

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B369 Standard Specification for Copper-Nickel Alloy Castings

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod

    B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

    B373 Standard Specification for Aluminum Foil for Capacitors

    B374 Standard Terminology Relating to Electroplating

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

    B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

    B388 Standard Specification for Thermostat Metal Sheet and Strip

    B389 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

    B391 Standard Specification for Niobium and Niobium Alloy Ingots

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

    B403 Standard Specification for Magnesium-Alloy Investment Castings

    B406 Standard Test Method for Transverse Rupture Strength of Cemented Carbides

    B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B413 Standard Specification for Refined Silver

    B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire

    B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

    B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

    B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B427 Standard Specification for Gear Bronze Alloy Castings

    B428 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

    B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

    B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B440 Standard Specification for Cadmium

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

    B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar

    B447 Standard Specification for Welded Copper Tube

    B449 Standard Specification for Chromates on Aluminum

    B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application

    B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B457 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

    B464 Standard Specification for Welded UNS N08020 Alloy Pipe

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B468 Standard Specification for Welded UNS N08020 Alloy Tubes

    B470 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

    B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B477 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy

    B478 Standard Test Method for Cross Curvature of Thermostat Metals

    B479 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

    B480 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

    B481 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

    B482 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

    B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B490 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings

    B494/B494M Standard Specification for Primary Zirconium

    B495 Standard Specification for Zirconium and Zirconium Alloy Ingots

    B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

    B497 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B500/B500M Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors

    B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

    B502/B502M Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

    B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B507 Standard Practice for Design of Articles to Be Electroplated on Racks

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

    B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

    B515 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

    B516 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes

    B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

    B520 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

    B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

    B522 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

    B527 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds

    B528 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B530 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

    B532 Standard Specification for Appearance of Electroplated Plastic Surfaces

    B533 Standard Test Method for Peel Strength of Metal Electroplated Plastics

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

    B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

    B540 Standard Specification for Palladium Electrical Contact Alloy

    B541 Standard Specification for Gold Electrical Contact Alloy

    B542 Standard Terminology Relating to Electrical Contacts and Their Use

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B548 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

    B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B556 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B558 Standard Practice for Preparation of Nickel Alloys for Electroplating

    B559 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

    B560 Standard Specification for Modern Pewter Alloys

    B561 Standard Specification for Refined  Platinum

    B562 Standard Specification for Refined Gold

    B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

    B564 Standard Specification for Nickel Alloy Forgings

    B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

    B566 Standard Specification for Copper-Clad Aluminum Wire

    B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B576 Standard Guide for Arc Erosion Testing of Electrical Contact Materials

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B578 Standard Test Method for Microhardness of Electroplated Coatings

    B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

    B580 Standard Specification for Anodic Oxide Coatings on Aluminum

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B587 Standard Specification for Welded Brass Tube

    B588 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

    B589 Standard Specification for Refined Palladium

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B593 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

    B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

    B595 Standard Specification for Sintered Aluminum Structural Parts

    B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material

    B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

    B601 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

    B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

    B603 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

    B604 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B607 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

    B611 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials

    B613 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

    B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

    B615 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

    B616 Standard Specification for Refined Rhodium

    B617 Standard Specification for Coin Silver Electrical Contact Alloy

    B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B628 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy

    B629 Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

    B630 Standard Practice for Preparation of Chromium for Electroplating with Chromium

    B631 Standard Specification for Silver-Tungsten Electrical Contact Materials

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B634 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

    B635 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

    B636 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B644 Standard Specification for Copper Alloy Addition Agents

    B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

    B646 Standard Practice for Fracture Toughness Testing of Aluminum Alloys

    B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots

    B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

    B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

    B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire

    B657 Guide for Metallographic Identification of Microstructure in Cemented Carbides

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B661 Standard Practice for Heat Treatment of Magnesium Alloys

    B662 Standard Specification for Silver-Molybdenum Electrical Contact Material

    B663 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material

    B664 Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

    B665 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

    B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products

    B667 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

    B668 Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube

    B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

    B671 Standard Specification for Refined Iridium

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B675 Standard Specification for UNS N08367 Welded Pipe

    B676 Standard Specification for UNS N08367 Welded Tube

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B678 Standard Test Method for Solderability of Metallic-Coated Products

    B679 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B682 Standard Specification for Standard Metric Sizes of Electrical Conductors

    B683 Standard Specification for Pure Palladium Electrical Contact Material

    B684 Standard Specification for Platinum-Iridium Electrical Contact Materials

    B685 Standard Specification for Palladium-Copper Electrical Contact Material

    B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B692 Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material

    B693 Standard Specification for Silver-Nickel Electrical Contact Materials

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B696 Standard Specification for Coatings of Cadmium Mechanically Deposited

    B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

    B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

    B699 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

    B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

    B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

    B702 Standard Specification for Copper-Tungsten Electrical Contact Material

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

    B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip

    B710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

    B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

    B712 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials

    B717 Standard Specification for Refined Ruthenium

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

    B723 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

    B727 Standard Practice for Preparation of Plastics Materials for Electroplating

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

    B731 Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

    B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

    B734 Standard Specification for Electrodeposited Copper for Engineering Uses

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B736 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

    B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

    B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

    B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B742 Standard Specification for Fine Silver Electrical Contact Fabricated Material

    B743 Standard Specification for Seamless Copper Tube in Coils

    B744/B744M Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

    B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

    B746/B746M Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B748 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B753 Standard Specification for Thermostat Component Alloys

    B754 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

    B760 Standard Specification for Tungsten Plate, Sheet, and Foil

    B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

    B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

    B763/B763M Standard Specification for Copper Alloy Sand Castings for Valve Applications

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B767 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B769 Standard Test Method for Shear Testing of Aluminum Alloys

    B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

    B771 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

    B772 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

    B774 Standard Specification for Low Melting Point Alloys

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

    B777 Standard Specification for Tungsten Base, High-Density Metal

    B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

    B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

    B780 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

    B781 Standard Guide for Silver-Cadmium Oxide Contact Material

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B784 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

    B786/B786M Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

    B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

    B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

    B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

    B790/B790M Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

    B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

    B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

    B794 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements

    B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B796 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications

    B797 Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts

    B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

    B799 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

    B806 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

    B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

    B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B816 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

    B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

    B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B830 Standard Specification for Uniform Test Methods and Frequency

    B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

    B832 Standard Guide for Electroforming with Nickel and Copper

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

    B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B839 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method

    B840 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

    B841 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

    B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B844 Standard Guide for Silver-Tin Oxide Contact Material

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B846 Standard Terminology for Copper and Copper Alloys

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

    B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

    B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

    B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B854 Standard Guide for Measuring Electrical Contact Intermittences

    B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

    B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

    B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B864/B864M Standard Specification for Corrugated Aluminum Box Culverts

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B867 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

    B868 Standard Practice for Contact Performance Classification of Electrical Connection Systems

    B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B871 Standard Test Method for Tear Testing of Aluminum Alloy Products

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B874 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

    B875 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

    B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B878 Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

    B879 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

    B880 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

    B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

    B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

    B885 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B890 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

    B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

    B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

    B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B896 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

    B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot

    B898 Standard Specification for Reactive and Refractory Metal Clad Plate

    B899 Standard Terminology Relating to Non-ferrous Metals and Alloys

    B900 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B902/B902M Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B904 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

    B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

    B908 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

    B909 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

    B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire

    B911/B911M Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B913 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

    B914 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

    B915 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

    B916 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

    B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

    B918/B918M Standard Practice for Heat Treatment of Wrought Aluminum Alloys

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

    B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

    B924 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B926 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

    B927/B927M Standard Specification for Brass Rod, Bar, and Shapes

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B930 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

    B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

    B932 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip

    B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

    B935 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

    B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials

    B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    B941 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

    B942 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

    B943 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers

    B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products

    B947 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate

    B949 Standard Specification for General Requirements for Zinc and Zinc Alloy Products

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

    B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

    B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

    B954 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry

    B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

    B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application

    B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    B965 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

    B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

    B970 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts

    B971 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

    B972 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application

    B973 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    B976 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)

    B977 Standard Specification for Titanium and Titanium Ingots

    B978/B978M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)

    B979 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors

    B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes

    B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

    B984 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use

    B985 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

    B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    B989 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings

    C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

    C5 Standard Specification for Quicklime for Structural Purposes

    C10/C10M Standard Specification for Natural Cement

    C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

    C12 Standard Practice for Installing Vitrified Clay Pipe Lines

    C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

    C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

    C16 Standard Test Method for Load Testing Refractory Shapes at High Temperatures

    C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

    C22/C22M Standard Specification for Gypsum

    C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

    C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

    C27 Standard Classification of Fireclay and High-Alumina Refractory Brick

    C28/C28M Standard Specification for Gypsum Plasters

    C29/C29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

    C33/C33M Standard Specification for Concrete Aggregates

    C34 Standard Specification for Structural Clay Load-Bearing Wall Tile

    C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

    C51 Standard Terminology Relating to Lime and Limestone (as used by the Industry)

    C55 Standard Specification for Concrete Building Brick

    C56 Standard Specification for Structural Clay Nonloadbearing Tile

    C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

    C61/C61M Standard Specification for Gypsum Keene's Cement

    C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

    C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

    C70 Standard Test Method for Surface Moisture in Fine Aggregate

    C71 Standard Terminology Relating to Refractories

    C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

    C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

    C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

    C90 Standard Specification for Loadbearing Concrete Masonry Units

    C91/C91M Standard Specification for Masonry Cement

    C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone

    C108 Standard Symbols for Heat Transmission

    C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C113 Standard Test Method for Reheat Change of Refractory Brick

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C115/C115M Standard Test Method for Fineness of Portland Cement by the Turbidimeter

    C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

    C118 Standard Specification for Concrete Pipe for Irrigation or Drainage

    C118M Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)

    C119 Standard Terminology Relating to Dimension Stone

    C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C121/C121M Standard Test Method for Water Absorption of Slate

    C123/C123M Standard Test Method for Lightweight Particles in Aggregate

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C129 Standard Specification for Nonloadbearing Concrete Masonry Units

    C131/C131M Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C133 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

    C134 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

    C135 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

    C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

    C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

    C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C144 Standard Specification for Aggregate for Masonry Mortar

    C146 Standard Test Methods for Chemical Analysis of Glass Sand

    C147 Standard Test Methods for Internal Pressure Strength of Glass Containers

    C148 Standard Test Methods for Polariscopic Examination of Glass Containers

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C150/C150M Standard Specification for Portland Cement

    C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement

    C155 Standard Classification of Insulating Firebrick

    C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C158 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

    C159 Standard Specification for Vitrified Clay Filter Blocks

    C162 Standard Terminology of Glass and Glass Products

    C163 Standard Practice for Mixing Thermal Insulating Cement Samples

    C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

    C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

    C168 Standard Terminology Relating to Thermal Insulation

    C169 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

    C170/C170M Standard Test Method for Compressive Strength of Dimension Stone

    C171 Standard Specification for Sheet Materials for Curing Concrete

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C179 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

    C181 Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

    C182 Standard Test Method for Thermal Conductivity of Insulating Firebrick

    C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

    C186 Standard Test Method for Heat of Hydration of Hydraulic Cement

    C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

    C188 Standard Test Method for Density of Hydraulic Cement

    C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar

    C199 Standard Test Method for Pier Test for Refractory Mortars

    C201 Standard Test Method for Thermal Conductivity of Refractories

    C202 Standard Test Method for Thermal Conductivity of Refractory Brick

    C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

    C206 Standard Specification for Finishing Hydrated Lime

    C207 Standard Specification for Hydrated Lime for Masonry Purposes

    C208 Standard Specification for Cellulosic Fiber Insulating Board

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C210 Standard Test Method for Reheat Change of Insulating Firebrick

    C212 Standard Specification for Structural Clay Facing Tile

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

    C217/C217M Standard Test Method for Weather Resistance of Slate

    C219 Standard Terminology Relating to Hydraulic Cement

    C220 Standard Specification for Flat Asbestos-Cement Sheets

    C221 Standard Specification for Corrugated Asbestos-Cement Sheets

    C222 Standard Specification for Asbestos-Cement Roofing Shingles

    C223 Standard Specification for Asbestos-Cement Siding

    C224 Standard Practice for Sampling Glass Containers

    C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C232/C232M Standard Test Method for Bleeding of Concrete

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C240 Standard Test Methods of Testing Cellular Glass Insulation Block

    C241/C241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C242 Standard Terminology of Ceramic Whitewares and Related Products

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

    C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C270 Standard Specification for Mortar for Unit Masonry

    C271/C271M Standard Test Method for Density of Sandwich Core Materials

    C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C274 Standard Terminology of Structural Sandwich Constructions

    C279 Standard Specification for Chemical-Resistant Masonry Units

    C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)

    C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

    C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C286 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

    C287 Standard Specification for Chemical-Resistant Sulfur Mortar

    C288 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

    C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete

    C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C301 Standard Test Methods for Vitrified Clay Pipe

    C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

    C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

    C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C315 Standard Specification for Clay Flue Liners and Chimney Pots

    C317/C317M Standard Specification for Gypsum Concrete

    C318/C318M Standard Specification for Gypsum Formboard

    C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars

    C322 Standard Practice for Sampling Ceramic Whiteware Clays

    C323 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays

    C324 Standard Test Method for Free Moisture in Ceramic Whiteware Clays

    C325 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays

    C326 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

    C329 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C336 Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation

    C338 Standard Test Method for Softening Point of Glass

    C341/C341M Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

    C346 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials

    C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

    C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

    C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

    C357 Standard Test Method for Bulk Density of Granular Refractory Materials

    C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

    C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

    C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

    C363/C363M Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

    C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

    C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

    C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores

    C367/C367M Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

    C368 Standard Test Method for Impact Resistance of Ceramic Tableware

    C370 Standard Test Method for Moisture Expansion of Fired Whiteware Products

    C371 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

    C372 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

    C373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles

    C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C375 Standard Classification of Water Used in Milling of Porcelain Enamel

    C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

    C385 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

    C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

    C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

    C394/C394M Standard Test Method for Shear Fatigue of Sandwich Core Materials

    C395 Standard Specification for Chemical-Resistant Resin Mortars

    C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

    C399 Standard Practice for Use of Chemical-Resistant Resin Mortars

    C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

    C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories

    C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C404 Standard Specification for Aggregates for Masonry Grout

    C406/C406M Standard Specification for Roofing Slate

    C408 Standard Test Method for Thermal Conductivity of Whiteware Ceramics

    C410 Standard Specification for Industrial Floor Brick

    C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

    C412 Standard Specification for Concrete Drain Tile

    C412M Standard Specification for Concrete Drain Tile (Metric)

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C414 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C416 Standard Classification of Silica Refractory Brick

    C417 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

    C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

    C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

    C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

    C424 Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C426 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units

    C428/C428M Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

    C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

    C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

    C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

    C444M Standard Specification for Perforated Concrete Pipe (Metric)

    C444 Standard Specification for Perforated Concrete Pipe

    C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

    C448 Standard Test Methods for Abrasion Resistance of Porcelain Enamels

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

    C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

    C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

    C454 Standard Test Method for Disintegration of Carbon Refractories by Alkali

    C455 Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick

    C456 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes

    C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

    C458/C458M Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

    C459/C459M Standard Test Methods for Asbestos-Cement Flat Products

    C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

    C467 Standard Classification of Mullite Refractories

    C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

    C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

    C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

    C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

    C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

    C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

    C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

    C476 Standard Specification for Grout for Masonry

    C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

    C478 Standard Specification for Precast Reinforced Concrete Manhole Sections

    C479 Standard Specification for Vitrified Clay Liner Plates

    C480/C480M Standard Test Method for Flexure Creep of Sandwich Constructions

    C481 Standard Test Method for Laboratory Aging of Sandwich Constructions

    C482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

    C484 Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile

    C485 Standard Test Method for Measuring Warpage of Ceramic Tile

    C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

    C490/C490M Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

    C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

    C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

    C499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

    C500/C500M Standard Test Methods for Asbestos-Cement Pipe

    C501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

    C502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile

    C503/C503M Standard Specification for Marble Dimension Stone

    C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

    C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

    C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

    C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

    C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C511 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C512/C512M Standard Test Method for Creep of Concrete in Compression

    C513 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

    C514 Standard Specification for Nails for the Application of Gypsum Board

    C515 Standard Specification for Chemical-Resistant Ceramic Tower Packings

    C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C520 Standard Test Methods for Density of Granular Loose Fill Insulations

    C522 Standard Test Method for Airflow Resistance of Acoustical Materials

    C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C536 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

    C537 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

    C538 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

    C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method

    C541/C541M Standard Specification for Linings for Asbestos-Cement Pipe

    C542 Standard Specification for Lock-Strip Gaskets

    C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain

    C545 Standard Classification of Zircon Refractories

    C547 Standard Specification for Mineral Fiber Pipe Insulation

    C549 Standard Specification for Perlite Loose Fill Insulation

    C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

    C551/C551M Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C554 Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

    C560 Standard Test Methods for Chemical Analysis of Graphite

    C561 Standard Test Method for Ash in a Graphite Sample

    C562 Standard Test Method for Moisture in a Graphite Sample

    C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C568/C568M Standard Specification for Limestone Dimension Stone

    C577 Standard Test Method for Permeability of Refractories

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    C583 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures

    C584 Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products

    C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

    C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

    C587 Standard Specification for Gypsum Veneer Plaster

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

    C597 Standard Test Method for Pulse Velocity Through Concrete

    C598 Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

    C600 Standard Test Method of Thermal Shock Test on Glass Pipe

    C601 Standard Test Method for Pressure Test on Glass Pipe

    C602 Standard Specification for Agricultural Liming Materials

    C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

    C607 Standard Practice for Coking Large Shapes of Carbon-Bearing Materials

    C609 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C611 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C613 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

    C614 Standard Test Method for Alkali Resistance of Porcelain Enamels

    C615/C615M Standard Specification for Granite Dimension Stone

    C616/C616M Standard Specification for Quartz-Based Dimension Stone

    C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C621 Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass

    C623 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

    C625 Standard Practice for Reporting Irradiation Results on Graphite

    C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester

    C629/C629M Standard Specification for Slate Dimension Stone

    C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

    C632 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

    C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

    C634 Standard Terminology Relating to Building and Environmental Acoustics

    C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

    C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C638 Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

    C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

    C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

    C645 Standard Specification for Nonstructural Steel Framing Members

    C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

    C648 Standard Test Method for Breaking Strength of Ceramic Tile

    C650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

    C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

    C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C654 Standard Specification for Porous Concrete Pipe

    C654M Standard Specification for Porous Concrete Pipe (Metric)

    C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C657 Standard Test Method for D-C Volume Resistivity of Glass

    C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

    C659 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels

    C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C662 Standard Specification for Impervious Graphite Pipe and Threading

    C663 Standard Specification for Asbestos-Cement Storm Drain Pipe

    C664 Standard Test Methods for Thickness of Diffusion Coating

    C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

    C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

    C668 Standard Specification for Asbestos-Cement Transmission Pipe

    C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

    C673 Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes

    C674 Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

    C675 Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

    C676 Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

    C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C688 Standard Specification for Functional Additions for Use in Hydraulic Cements

    C689 Standard Test Method for Modulus of Rupture of Unfired Clays

    C690 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique

    C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C693 Standard Test Method for Density of Glass by Buoyancy

    C694 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C696 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets

    C697 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

    C698 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)

    C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

    C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size

    C703 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

    C704/C704M Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

    C706 Standard Specification for Limestone for Animal Feed Use

    C708 Specification for Nuclear-Grade Beryllium Oxide Powder

    C709 Standard Terminology Relating to Manufactured Carbon and Graphite

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

    C715 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis

    C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C717 Standard Terminology of Building Seals and Sealants

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C721 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability

    C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile

    C724 Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass

    C725 Standard Specification for Semidense Mineral Fiber Siding

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

    C728 Standard Specification for Perlite Thermal Insulation Board

    C729 Standard Test Method for Density of Glass by the Sink-Float Comparator

    C730 Standard Test Method for Knoop Indentation Hardness of Glass

    C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C735 Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

    C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C737 Standard Specification for Limestone for Dusting of Coal Mines

    C738 Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C740/C740M Standard Guide for Evacuated Reflective Insulation In Cryogenic Service

    C743 Standard Test Method for Continuity of Porcelain Enamel Coatings

    C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C746 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading

    C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

    C748 Standard Test Method for Rockwell Hardness of Graphite Materials

    C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

    C750 Standard Specification for Nuclear-Grade Boron Carbide Powder

    C751 Standard Specification for Nuclear-Grade Boron Carbide Pellets

    C752 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy

    C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

    C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

    C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C756 Standard Test Method for Cleanability of Surface Finishes

    C757 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable

    C758 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal

    C759 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions

    C760 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys

    C761 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C767 Standard Test Method for Thermal Conductivity of Carbon Refractories

    C769 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young's Modulus

    C770 Standard Test Method for Measurement of Glass Stress—Optical Coefficient

    C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C773 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C776 Standard Specification for Sintered Uranium Dioxide Pellets

    C777 Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

    C778 Standard Specification for Standard Sand

    C779/C779M Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C781 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

    C782 Standard Test Method for Softness of Preformed Tape Sealants

    C783 Standard Practice for Core Sampling of Graphite Electrodes

    C784 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

    C785 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets

    C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

    C787 Standard Specification for Uranium Hexafluoride for Enrichment

    C788 Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals

    C791 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

    C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

    C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C799 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions

    C800 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C803/C803M Standard Test Method for Penetration Resistance of Hardened Concrete

    C805/C805M Standard Test Method for Rebound Number of Hardened Concrete

    C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

    C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

    C808 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

    C809 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets

    C810 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry

    C813 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

    C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

    C821 Standard Specification for Lime for Use with Pozzolans

    C822 Standard Terminology Relating to Concrete Pipe and Related Products

    C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

    C824 Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method

    C825 Standard Specification for Precast Concrete Barriers

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C828 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines

    C829 Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

    C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

    C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes?

    C832 Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

    C833 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets

    C834 Standard Specification for Latex Sealants

    C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

    C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

    C837 Standard Test Method for Methylene Blue Index of Clay

    C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

    C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

    C840 Standard Specification for Application and Finishing of Gypsum Board

    C841 Standard Specification for Installation of Interior Lathing and Furring

    C842 Standard Specification for Application of Interior Gypsum Plaster

    C843 Standard Specification for Application of Gypsum Veneer Plaster

    C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

    C845/C845M Standard Specification for Expansive Hydraulic Cement

    C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

    C847 Standard Specification for Metal Lath

    C848 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance

    C849 Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares

    C852 Standard Guide for Design Criteria for Plutonium Gloveboxes

    C856 Standard Practice for Petrographic Examination of Hardened Concrete

    C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C859 Standard Terminology Relating to Nuclear Materials

    C860 Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test

    C861 Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes

    C862 Standard Practice for Preparing Refractory Concrete Specimens by Casting

    C863 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C865 Standard Practice for Firing Refractory Concrete Specimens

    C866 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays

    C867 Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

    C870 Standard Practice for Conditioning of Thermal Insulating Materials

    C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

    C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces

    C873/C873M Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C874 Standard Test Method for Rotary Slag Testing of Refractory Materials

    C875 Standard Specification for Asbestos-Cement Conduit

    C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

    C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

    C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

    C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

    C879 Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C880/C880M Standard Test Method for Flexural Strength of Dimension Stone

    C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C884/C884M Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

    C885 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance

    C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

    C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C888 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C889 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

    C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures

    C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

    C895 Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile

    C896 Standard Terminology Relating to Clay Products

    C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

    C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

    C899 Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials

    C900 Standard Test Method for Pullout Strength of Hardened Concrete

    C901 Standard Specification for Prefabricated Masonry Panels

    C902 Standard Specification for Pedestrian and Light Traffic Paving Brick

    C903 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning

    C904 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

    C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908 Standard Test Method for Yield Strength of Preformed Tape Sealants

    C909 Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes

    C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

    C912 Standard Practice for Designing a Process for Cleaning Technical Glasses

    C913 Standard Specification for Precast Concrete Water and Wastewater Structures

    C914 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C916 Standard Specification for Adhesives for Duct Thermal Insulation

    C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

    C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants

    C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

    C922 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C925 Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders

    C926 Standard Specification for Application of Portland Cement-Based Plaster

    C927 Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel

    C930 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C933 Standard Specification for Welded Wire Lath

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units

    C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

    C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

    C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C941 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

    C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

    C944/C944M Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

    C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

    C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

    C949 Standard Test Method for Porosity  in  Vitreous  Whitewares  by  Dye  Penetration

    C950/C950M Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C952 Standard Test Method for Bond Strength of Mortar to Masonry Units

    C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

    C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

    C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

    C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

    C958 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation

    C961 Standard Test Method for Lap Shear Strength of Sealants

    C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C964 Standard Guide for Lock-Strip Gasket Glazing

    C965 Standard Practice for Measuring Viscosity of Glass Above the Softening Point

    C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

    C967 Standard Specification for Uranium Ore Concentrate

    C968 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C972 Standard Test Method for Compression-Recovery of Tape Sealant

    C973 Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing

    C974 Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting

    C975 Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing

    C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

    C978 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete

    C980 Standard Specification for Industrial Chimney Lining Brick

    C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

    C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)

    C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

    C987 Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

    C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

    C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

    C992 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C993 Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors

    C996 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U

    C998 Standard Practice for Sampling Surface Soil for Radionuclides

    C999 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

    C1000 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry

    C1001 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy

    C1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

    C1005 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

    C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units

    C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    C1009 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry

    C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

    C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1019 Standard Test Method for Sampling and Testing Grout

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1022 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate

    C1023 Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards

    C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

    C1026 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling

    C1027 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1030 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry

    C1031 Standard Specification for Nuclear-Grade Aluminum Oxide Powder

    C1032 Standard Specification for Woven Wire Plaster Base

    C1036 Standard Specification for Flat Glass

    C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

    C1039 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

    C1040/C1040M Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

    C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

    C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1052 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride

    C1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

    C1054 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens

    C1055 Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries

    C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1059/C1059M Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

    C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    C1062 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities

    C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1065 Standard Specification for Nuclear-Grade Zirconium Oxide Powder

    C1066 Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    C1067 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

    C1068 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

    C1069 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

    C1070 Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering

    C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength

    C1073 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1075 Standard Practices for Sampling Uranium-Ore Concentrate

    C1076 Standard Specification for Nuclear Grade Hafnium Oxide Pellets

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1080 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

    C1081 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

    C1082 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

    C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

    C1089 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

    C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

    C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1096/C1096M Standard Test Method for Determination of Wood Fiber in Asbestos Cement

    C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

    C1098 Standard Specification for Nuclear-Grade Hafnium Oxide Powder

    C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

    C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

    C1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C1103M Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1106 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick

    C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

    C1108 Standard Test Method for Plutonium by Controlled-Potential Coulometry

    C1109 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry

    C1111 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    C1113/C1113M Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1119/C1119M Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes

    C1120/C1120M Standard Test Method for Wash Test of Asbestos

    C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

    C1122/C1122M Standard Test Method for Wet Volume of Asbestos

    C1123/C1123M Standard Test Method for Compressibility and Recovery of Asbestos

    C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos

    C1125 Standard Test Method for Penetration Index of Asbestos

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

    C1128 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials

    C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems

    C1133/C1133M Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning

    C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

    C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

    C1138M Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

    C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

    C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1141/C1141M Standard Specification for Admixtures for Shotcrete

    C1142 Standard Specification for Extended Life Mortar for Unit Masonry

    C1144 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms

    C1145 Standard Terminology of Advanced Ceramics

    C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

    C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

    C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    C1154 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

    C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

    C1156 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete

    C1160 Standard Specification for Chemical-Resistant Carbon Brick

    C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1162/C1162M Standard Test Method for Loose Density of Asbestos

    C1163 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride

    C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

    C1165 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode

    C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C1167 Standard Specification for Clay Roof Tiles

    C1168 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis

    C1169 Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance

    C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

    C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

    C1172 Standard Specification for Laminated Architectural Flat Glass

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1174 Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste

    C1175 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

    C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

    C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

    C1180 Standard Terminology of Mortar and Grout for Unit Masonry

    C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

    C1182 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1184 Standard Specification for Structural Silicone Sealants

    C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

    C1186 Standard Specification for Flat Fiber-Cement Sheets

    C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1188 Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities

    C1189 Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors

    C1190 Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick

    C1193 Standard Guide for Use of Joint Sealants

    C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1195 Standard Test Method for Absorption of Architectural Cast Stone

    C1196 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

    C1197 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

    C1198 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1201/C1201M Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1203 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

    C1204 Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration

    C1205 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry

    C1206 Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration

    C1207 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting

    C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1210 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry

    C1211 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

    C1212 Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids

    C1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

    C1214M Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)

    C1215 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry

    C1216/C1216M Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1217 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1219 Standard Test Methods for Arsenic in Uranium Hexafluoride

    C1220 Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste

    C1221 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry

    C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

    C1223 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1225 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

    C1227 Standard Specification for Precast Concrete Septic Tanks

    C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

    C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

    C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1232 Standard Terminology of Masonry

    C1233 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

    C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    C1238 Standard Guide for Installation of Walk-Through Metal Detectors

    C1239 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

    C1243 Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc

    C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

    C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1252 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1254 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence

    C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy

    C1256 Standard Practice for Interpreting Glass Fracture Surface Features

    C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

    C1259 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1261 Standard Specification for Firebox Brick for Residential Fireplaces

    C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

    C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

    C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

    C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1267 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium

    C1268 Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry

    C1269 Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors

    C1270 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors

    C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

    C1272 Standard Specification for Heavy Vehicular Paving Brick

    C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

    C1274 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

    C1275 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

    C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel

    C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

    C1280 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1283 Standard Practice for Installing Clay Flue Lining

    C1284 Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry

    C1285 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)

    C1287 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry

    C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

    C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1295 Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution

    C1297 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials

    C1298 Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys

    C1300 Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method

    C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

    C1302 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

    C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane

    C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane

    C1307 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry

    C1308 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms

    C1309 Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors

    C1311 Standard Specification for Solvent Release Sealants

    C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory

    C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications

    C1314 Standard Test Method for Compressive Strength of Masonry Prisms

    C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C1316 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler

    C1318 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

    C1319 Standard Specification for Concrete Grid Paving Units

    C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

    C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

    C1322 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

    C1323 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

    C1324 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

    C1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

    C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

    C1327 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1331 Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

    C1332 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

    C1334 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide

    C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1336 Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions

    C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

    C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

    C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

    C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

    C1343 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence

    C1344 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method

    C1345 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry

    C1346 Standard Practice for Dissolution of UF6 from P-10 Tubes

    C1347 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis

    C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

    C1350M Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)

    C1351M Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

    C1352/C1352M Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

    C1353/C1353M Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

    C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites

    C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

    C1357 Standard Test Methods for Evaluating Masonry Bond Strength

    C1358 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures

    C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

    C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1364 Standard Specification for Architectural Cast Stone

    C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

    C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

    C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

    C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1370 Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1378 Standard Test Method for Determination of Resistance to Staining

    C1379 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry

    C1380 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry

    C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

    C1384 Standard Specification for Admixtures for Masonry Mortars

    C1385/C1385M Standard Practice for Sampling Materials for Shotcrete

    C1387 Standard Guide for the Determination of Technetium-99 in Soil

    C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1396/C1396M Standard Specification for Gypsum Board

    C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

    C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

    C1400 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls

    C1401 Standard Guide for Structural Sealant Glazing

    C1402 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples

    C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)

    C1407 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

    C1408 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method

    C1409 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1411 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis

    C1413 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry

    C1414 Standard Practice for The Separation of Americium from Plutonium by Ion Exchange

    C1415 Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry

    C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

    C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)

    C1419 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus

    C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass

    C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation

    C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

    C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

    C1426 Standard Practices for Verification and Calibration of Polarimeters

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1428 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method

    C1429 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer

    C1430 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration

    C1431 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal

    C1432 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis

    C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

    C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

    C1436 Standard Specification for Materials for Shotcrete

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1438 Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1439 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1441 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy

    C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1443 Standard Specification for Glasses, Portlight, Circular, Fully Tempered

    C1445 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

    C1446 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

    C1447/C1447M Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

    C1448/C1448M Standard Specification for Non-Asbestos Fiber-Cement Conduit

    C1449/C1449M Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

    C1450/C1450M Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

    C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

    C1453 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets

    C1454 Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel

    C1455 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods

    C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)

    C1457 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction

    C1458 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay

    C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

    C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

    C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1462 Standard Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U

    C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

    C1464 Standard Specification for Bent Glass

    C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

    C1466 Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware

    C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

    C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

    C1469 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1471/C1471M Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1473 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry

    C1474 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

    C1475 Standard Guide for Determination of Neptunium-237 in Soil

    C1477 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry

    C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

    C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

    C1480/C1480M Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1483/C1483M Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

    C1484 Standard Specification for Vacuum Insulation Panels

    C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

    C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1489 Standard Specification for Lime Putty for Structural Purposes

    C1490 Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel

    C1491 Standard Specification for Concrete Roof Pavers

    C1492 Standard Specification for Concrete Roof Tile

    C1493 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System

    C1494 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder

    C1495 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

    C1496 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

    C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

    C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

    C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1500 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1502 Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide

    C1503 Standard Specification for Silvered Flat Glass Mirror

    C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

    C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

    C1505 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1507 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil

    C1508 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy

    C1509 Standard Specification for Beaded Process Glass Pipe and Fittings

    C1510 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry

    C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)

    C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    C1514 Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle

    C1515 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

    C1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems

    C1517 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy

    C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1520 Standard Guide for Paintability of Latex Sealants

    C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1525 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

    C1526 Standard Specification for Serpentine Dimension Stone

    C1527/C1527M Standard Specification for Travertine Dimension Stone

    C1528 Standard Guide for Selection of Dimension Stone

    C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

    C1530/C1530M Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

    C1531 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index

    C1532/C1532M Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

    C1533 Standard Guide for General Design Considerations for Hot Cell Equipment

    C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

    C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1539 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting

    C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1541 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

    C1542/C1542M Standard Test Method for Measuring Length of Concrete Cores

    C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

    C1545 Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer

    C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

    C1547 Standard Classification for Fusion-Cast Refractory Blocks and Shapes

    C1548 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

    C1552 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

    C1553 Standard Guide for Drying Behavior of Spent Nuclear Fuel

    C1554 Standard Guide for Materials Handling Equipment for Hot Cells

    C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

    C1557 Standard Test Method for Tensile Strength and Young's Modulus of Fibers

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

    C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

    C1561 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry

    C1562 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems

    C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1565 Standard Test Method for Determination of Pack-Set Index of Portland Cement

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1568 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)

    C1569 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)

    C1570 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)

    C1571 Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment

    C1572 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities

    C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

    C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

    C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

    C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

    C1580 Standard Test Method for Water-Soluble Sulfate in Soil

    C1581/C1581M Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1583/C1583M Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

    C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

    C1586 Standard Guide for Quality Assurance of Mortars

    C1587 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

    C1589/C1589M Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C1590 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry

    C1592/C1592M Standard Guide for Making Quality Nondestructive Assay Measurements

    C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement

    C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603 Standard Test Method for Measurement of Solids in Water

    C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

    C1605 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry

    C1606 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

    C1607 Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware

    C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

    C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

    C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1614 Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry.

    C1615 Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities

    C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

    C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

    C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

    C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1621/C1621M Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

    C1622/C1622M Standard Specification for Cold-Weather Admixture Systems

    C1623 Standard Specification for Manufactured Concrete Masonry Lintels

    C1624 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

    C1625 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry

    C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

    C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

    C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    C1634 Standard Specification for Concrete Facing Brick

    C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1636 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride

    C1637 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis

    C1638 Standard Guide for the Determination of Iodine-129 In Uranium Oxide

    C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation

    C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    C1645/C1645M Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units

    C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

    C1647 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials

    C1648 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass

    C1649 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated

    C1650 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated

    C1651 Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass

    C1652/C1652M Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids

    C1655 Standard Classification of Fireclay and High-Alumina Mortars

    C1656 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile

    C1658/C1658M Standard Specification for Glass Mat Gypsum Panels

    C1660 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

    C1661 Standard Guide for Viewing Systems for Remotely Operated Facilities

    C1662 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method

    C1663 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test

    C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

    C1670/C1670M Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units

    C1671 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging

    C1672 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

    C1673 Standard Terminology of C26.10 Nondestructive Assay Methods

    C1674 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

    C1675 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1676 Standard Specification for Microporous Thermal Insulation

    C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets

    C1678 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses

    C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

    C1681 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1682 Standard Guide for Characterization of Spent Nuclear Fuel in Support of Geologic Repository Disposal

    C1683 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

    C1684 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength

    C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

    C1686 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

    C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

    C1689 Standard Practice for Subsampling of Uranium Hexafluoride

    C1691 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units

    C1692 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry

    C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1694 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

    C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

    C1696 Standard Guide for Industrial Thermal Insulation Systems

    C1697 Standard Specification for Blended Supplementary Cementitious Materials

    C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

    C1699 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

    C1701/C1701M Standard Test Method for Infiltration Rate of In Place Pervious Concrete

    C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

    C1703 Standard Practice for Sampling of Gaseous Uranium Hexafluoride

    C1704/C1704M Standard Test Method for Sampling and Testing Structural Cementitious Panels

    C1705/C1705M Standard Specification for Structural Cementitious Panels

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

    C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1713 Standard Specification for Mortars for the Repair of Historic Masonry

    C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

    C1715 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems

    C1716/C1716M Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

    C1717 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels

    C1718 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning

    C1719 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1720 Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses

    C1721 Standard Guide for Petrographic Examination of Dimension Stone

    C1722 Standard Guide for Repair and Restoration of Dimension Stone

    C1723 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

    C1725 Standard Guide for Hot Cell Specialized Support Equipment and Tools

    C1726/C1726M Standard Guide for Use of Modeling for Passive Gamma Measurements

    C1728 Standard Specification for Flexible Aerogel Insulation

    C1729 Standard Specification for Aluminum Jacketing for Insulation

    C1729M Standard Specification for Aluminum Jacketing for Insulation

    C1731 Standard Specification for Concrete Floor Tile

    C1733 Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C1737 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    C1738/C1738M Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

    C1740 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

    C1741 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

    C1742 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method

    C1743 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

    C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

    C1745/C1745M Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1746/C1746M Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

    C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

    C1750 Standard Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste

    C1751 Standard Guide for Sampling Radioactive Tank Waste

    C1752 Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges

    C1754/C1754M Standard Test Method for Density and Void Content of Hardened Pervious Concrete

    C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    C1757 Standard Test Method for ?Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

    C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    C1763 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

    C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1765 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C1766 Standard Specification for Factory-Laminated Gypsum Panel Products

    C1767 Standard Specification for Stainless Steel Jacketing for Insulation

    C1768/C1768M Standard Practice for Accelerated Curing of Concrete Cylinders

    C1770 Standard Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide

    C1771 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction

    C1773 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1775 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

    C1777 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

    C1780 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

    C1781/C1781M Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

    C1784 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    C1785 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

    C1787 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1788 Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1789 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels

    C1790 Standard Specification for Fly Ash Facing Brick

    C1791 Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems

    C1792 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes

    C1799/C1799M Standard Guide to Dimension Stone Test Specimen Sampling and Preparation

    D4 Standard Test Method for Bitumen Content

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

    D8 Standard Terminology Relating to Materials for Roads and Pavements

    D9 Standard Terminology Relating to Wood and Wood-Based Products

    D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

    D20 Standard Test Method for Distillation of Road Tars

    D25 Standard Specification for Round Timber Piles

    D34 Standard Guide for Chemical Analysis of White Pigments

    D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D41/D41M Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

    D43/D43M Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

    D49 Standard Test Methods of Chemical Analysis of Red Lead

    D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D69 Standard Test Methods for Friction Tapes

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D75/D75M Standard Practice for Sampling Aggregates

    D76/D76M Standard Specification for Tensile Testing Machines for Textiles

    D79 Standard Specification for Zinc Oxide Pigments

    D81 Standard Specification for Basic Carbonate White Lead Pigment

    D83 Standard Specification for Red Lead Pigment

    D85 Standard Specification for Ochre Pigment

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

    D88 Standard Test Method for Saybolt Viscosity

    D91 Standard Test Method for Precipitation Number of Lubricating Oils

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D94 Standard Test Methods for Saponification Number of Petroleum Products

    D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

    D97 Standard Test Method for Pour Point of Petroleum Products

    D98 Standard Specification for Calcium Chloride

    D113 Standard Test Method for Ductility of Bituminous Materials

    D115 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

    D116 Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications

    D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

    D120 Standard Specification for Rubber Insulating Gloves

    D121 Standard Terminology of Coal and Coke

    D123 Standard Terminology Relating to Textiles

    D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green

    D127 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

    D128 Standard Test Methods for Analysis of Lubricating Grease

    D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D139 Standard Test Method for Float Test for Bituminous Materials

    D140/D140M Standard Practice for Sampling Bituminous Materials

    D143 Standard Test Methods for Small Clear Specimens of Timber

    D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

    D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

    D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

    D153 Standard Test Methods for Specific Gravity of Pigments

    D154 Standard Guide for Testing Varnishes

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D167 Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke

    D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

    D178 Standard Specification for Rubber Insulating Matting

    D185 Standard Test Methods for Coarse Particles in Pigments

    D187 Standard Test Method for Burning Quality of Kerosine

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D197 Standard Test Method for Sampling and Fineness Test of Pulverized Coal

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D202 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

    D204 Standard Test Methods for Sewing Threads

    D209 Standard Specification for Lampblack Pigment

    D210 Standard Specification for Bone Black Pigment

    D211 Standard Specification for Chrome Yellow and Chrome Orange Pigments

    D217 Standard Test Methods for Cone Penetration of Lubricating Grease

    D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

    D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

    D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D229 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

    D233 Standard Test Methods of Sampling and Testing Turpentine

    D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D242/D242M Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D243/D243M Standard Test Method for Residue of Specified Penetration

    D244 Standard Test Methods and Practices for Emulsified Asphalts

    D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials

    D263 Standard Specification for Chrome Oxide Green Pigment

    D267 Standard Specification for Gold Bronze Powder

    D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

    D276 Standard Test Methods for Identification of Fibers in Textiles

    D279 Standard Test Methods for Bleeding of Pigments

    D280 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments

    D281 Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out

    D283 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

    D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

    D291 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal

    D293 Standard Test Method for the Sieve Analysis of Coke

    D295 Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D299/D299M Standard Specification for Asbestos Yarns

    D304 Standard Specification for n-Butyl Alcohol (Butanol)

    D305 Standard Test Method for Solvent-Extractable Material in Black Pigments

    D312 Standard Specification for Asphalt Used in Roofing

    D315/D315M Standard Specification for Woven Asbestos Tape

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D329 Standard Specification for Acetone

    D330 Standard Specification for 2-Butoxyethanol

    D331 Standard Specification for 2-Ethoxyethanol

    D332 Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation

    D333 Standard Guide for Clear and Pigmented Lacquers

    D341 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

    D344 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts

    D345 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

    D346/D346M Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

    D348 Standard Test Methods for Rigid Tubes Used for Electrical Insulation

    D349 Standard Test Methods for Laminated Round Rods Used for Electrical Insulation

    D350 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

    D351 Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

    D352 Standard Test Methods for Pasted Mica Used in Electrical Insulation

    D360 Standard Specification for Shellac Varnishes

    D365 Standard Guide for Soluble Nitrocellulose Base Solutions

    D374M Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)

    D375/D375M Standard Specification for Asbestos Roving

    D378 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

    D380 Standard Test Methods for Rubber Hose

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D387 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller

    D388 Standard Classification of Coals by Rank

    D395 Standard Test Methods for Rubber Property—Compression Set

    D396 Standard Specification for Fuel Oils

    D402/D402M Standard Test Method for Distillation of Cutback Asphalt

    D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

    D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

    D422 Standard Test Method for Particle-Size Analysis of Soils

    D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D430 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

    D440 Standard Test Method of Drop Shatter Test for Coal

    D441 Standard Test Method of Tumbler Test for Coal

    D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D449/D449M Standard Specification for Asphalt Used in Dampproofing and Waterproofing

    D450/D450M Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

    D451/D451M Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

    D452/D452M Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

    D454 Standard Test Method for Rubber Deterioration by Heat and Air Pressure

    D459 Standard Terminology Relating to Soaps and Other Detergents

    D460 Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products

    D464 Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products

    D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

    D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products

    D478 Standard Specification for Zinc Yellow (Zinc Chromate) Pigments

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D482 Standard Test Method for Ash from Petroleum Products

    D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D490 Standard Specification for Road Tar

    D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D495 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

    D500 Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils

    D501 Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

    D502 Standard Test Method for Particle Size of Soaps and Other Detergents

    D509 Standard Test Methods of Sampling and Grading Rosin

    D511 Standard Test Methods for Calcium and Magnesium In Water

    D512 Standard Test Methods for Chloride Ion In Water

    D513 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water

    D516 Standard Test Method for Sulfate Ion in Water

    D517 Standard Specification for Asphalt Plank

    D519 Standard Test Method for Length of Fiber in Wool Top

    D520 Standard Specification for Zinc Dust Pigment

    D521 Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D523 Standard Test Method for Specular Gloss

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D531 Standard Test Method for Rubber Property-Pusey and Jones Indentation

    D542 Standard Test Method for Index of Refraction of Transparent Organic Plastics

    D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D561 Standard Specification for Carbon Black Pigment for Paint

    D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D564 Standard Test Methods for Liquid Paint Driers

    D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

    D566 Standard Test Method for Dropping Point of Lubricating Grease

    D570 Standard Test Method for Water Absorption of Plastics

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D575 Standard Test Methods for Rubber Properties in Compression

    D578/D578M Standard Specification for Glass Fiber Strands

    D579/D579M Standard Specification for Greige Woven Glass Fabrics

    D580/D580M Standard Specification for Greige Woven Glass Tapes and Webbings

    D581/D581M Standard Specification for Glass Fiber Greige Braided Tubular Sleeving

    D584 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale

    D596 Standard Guide for Reporting Results of Analysis of Water

    D600 Standard Specification for Liquid Paint Driers

    D602 Standard Specification for Barium Sulfate Pigments

    D605 Standard Specification for Magnesium Silicate Pigment (Talc)

    D607 Standard Specification for Wet Ground Mica Pigments

    D608 Standard Specification for Dibutyl Phthalate

    D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

    D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

    D612 Standard Test Method for Carbonizable Substances in Paraffin Wax

    D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

    D618 Standard Practice for Conditioning Plastics for Testing

    D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

    D623 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D628/D628M Standard Specification for Asbestos Tubular Sleeving

    D629 Standard Test Methods for Quantitative Analysis of Textiles

    D632 Standard Specification for Sodium Chloride

    D633 Standard Volume Correction Table for Road Tar

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D638 Standard Test Method for Tensile Properties of Plastics

    D642 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

    D646 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

    D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints

    D661 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints

    D662 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D668 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

    D685 Standard Practice for Conditioning Paper and Paper Products for Testing

    D692/D692M Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D704 Standard Specification for Melamine-Formaldehyde Molding Compounds

    D705 Standard Specification for Urea-Formaldehyde Molding Compounds

    D706 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

    D707 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

    D709 Standard Specification for Laminated Thermosetting Materials

    D710 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation

    D711 Standard Test Method for No-Pick-Up Time of Traffic Paint

    D713 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

    D714 Standard Test Method for Evaluating Degree of Blistering of Paints

    D715 Standard Test Methods for Analysis of Barium Sulfate Pigment

    D716 Standard Test Methods for Evaluating Mica Pigment

    D717 Standard Test Methods for Analysis of Magnesium Silicate Pigment

    D718 Standard Test Methods for Analysis of Aluminum Silicate Pigment

    D720 Standard Test Method for Free-Swelling Index of Coal

    D721 Standard Test Method for Oil Content of Petroleum Waxes

    D731 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D737 Standard Test Method for Air Permeability of Textile Fabrics

    D740 Standard Specification for Methyl Ethyl Ketone

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D748 Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D751 Standard Test Methods for Coated Fabrics

    D763 Standard Specification for Raw and Burnt Umber Pigments

    D765 Standard Specification for Raw and Burnt Sienna Pigments

    D768 Standard Specification for Yellow Iron Oxide Hydrated

    D769 Standard Specification for Black Synthetic Iron Oxide

    D770 Standard Specification for Isopropyl Alcohol

    D772 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

    D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

    D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D800 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

    D801 Standard Test Methods for Sampling and Testing Dipentene

    D802 Standard Test Methods for Sampling and Testing Pine Oils

    D803 Standard Test Methods for Testing Tall Oil

    D804 Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D807 Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)

    D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D813 Standard Test Method for Rubber Deterioration—Crack Growth

    D814 Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids

    D816 Standard Test Methods for Rubber Cements

    D817 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

    D820 Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

    D831/D831M Standard Test Method for Gas Content of Cable and Capacitor Oils

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D841 Standard Specification for Nitration Grade Toluene

    D843 Standard Specification for Nitration Grade Xylene

    D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

    D848 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

    D852 Standard Test Method for Solidification Point of Benzene

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D857 Standard Test Method for Aluminum in Water

    D858 Standard Test Methods for Manganese in Water

    D859 Standard Test Method for Silica in Water

    D861 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns

    D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

    D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D869 Standard Test Method for Evaluating Degree of Settling of Paint

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

    D871 Standard Test Methods of Testing Cellulose Acetate

    D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D877/D877M Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

    D878 Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils

    D880 Standard Test Method for Impact Testing for Shipping Containers and Systems

    D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

    D883 Standard Terminology Relating to Plastics

    D885/D885M Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

    D887 Standard Practices for Sampling Water-Formed Deposits

    D888 Standard Test Methods for Dissolved Oxygen in Water

    D889 Standard Test Method for Volatile Oil in Rosin

    D890 Standard Test Method for Water in Liquid Pine Chemicals

    D891 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

    D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893 Standard Test Method for Insolubles in Used Lubricating Oils

    D896 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

    D897 Standard Test Method for Tensile Properties of Adhesive Bonds

    D899 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive

    D902 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D906 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

    D907 Standard Terminology of Adhesives

    D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

    D910 Standard Specification for Aviation Gasolines

    D913 Standard Practice for Evaluating Degree of Traffic Paint Line Wear

    D914 Standard Test Methods for Ethylcellulose

    D922 Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

    D923 Standard Practices for Sampling Electrical Insulating Liquids

    D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

    D925 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)

    D926 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)

    D928 Standard Specification for Sodium Bicarbonate

    D932 Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits

    D933 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits

    D934 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction

    D937 Standard Test Method for Cone Penetration of Petrolatum

    D938 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

    D942 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

    D943 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

    D945 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

    D946/D946M Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

    D950 Standard Test Method for Impact Strength of Adhesive Bonds

    D951 Standard Test Method for Water Resistance of Shipping Containers by Spray Method

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D953 Standard Test Method for Bearing Strength of Plastics

    D955 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

    D957 Standard Practice for Determining Surface Temperature of Molds for Plastics

    D962 Standard Specification for Aluminum Powder and Paste Pigments for Paints

    D964 Standard Specification for Metallic Copper Powder for Use in Antifouling Paints

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D971 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method

    D972 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration

    D975 Standard Specification for Diesel Fuel Oils

    D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels

    D977 Standard Specification for Emulsified Asphalt

    D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures

    D982 Standard Test Method for Organic Nitrogen in Paper and Paperboard

    D991 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products

    D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

    D996 Standard Terminology of Packaging and Distribution Environments

    D999 Standard Test Methods for Vibration Testing of Shipping Containers

    D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

    D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

    D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

    D1007 Standard Specification for sec-Butyl Alcohol

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1015 Standard Test Method for Freezing Points of High-Purity Hydrocarbons

    D1016 Standard Test Method for Purity of Hydrocarbons from Freezing Points

    D1018 Standard Test Method for Hydrogen In Petroleum Fractions

    D1025 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

    D1036 Standard Test Methods of Static Tests of Wood Poles

    D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    D1038 Standard Terminology Relating to Veneer and Plywood

    D1039 Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

    D1042 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1045 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

    D1047 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable

    D1048 Standard Specification for Rubber Insulating Blankets

    D1049 Standard Specification for Rubber Insulating Covers

    D1050 Standard Specification for Rubber Insulating Line Hose

    D1051 Standard Specification for Rubber Insulating Sleeves

    D1052 Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus

    D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1060 Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present

    D1061/D1061M Standard Specification for Asbestos Lap

    D1062 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

    D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1066 Standard Practice for Sampling Steam

    D1067 Standard Test Methods for Acidity or Alkalinity of Water

    D1068 Standard Test Methods for Iron in Water

    D1070 Standard Test Methods for Relative Density of Gaseous Fuels

    D1071 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples

    D1072 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

    D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1074 Standard Test Method for Compressive Strength of Bituminous Mixtures

    D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

    D1076 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

    D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids

    D1079 Standard Terminology Relating to Roofing and Waterproofing

    D1082 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica

    D1084 Standard Test Methods for Viscosity of Adhesives

    D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

    D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D1094 Standard Test Method for Water Reaction of Aviation Fuels

    D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

    D1102 Standard Test Method for Ash in Wood

    D1105 Standard Test Method for Preparation of Extractive-Free Wood

    D1106 Standard Test Method for Acid-Insoluble Lignin in Wood

    D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood

    D1108 Standard Test Method for Dichloromethane Solubles in Wood

    D1109 Standard Test Method for 1?% Sodium Hydroxide Solubility of Wood

    D1110 Standard Test Methods for Water Solubility of Wood

    D1113 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool

    D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

    D1119 Standard Test Method for Percent Ash Content of Engine Coolants

    D1120 Standard Test Method for Boiling Point of Engine Coolants

    D1121 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts

    D1122 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer

    D1123 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

    D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water

    D1126 Standard Test Method for Hardness in Water

    D1129 Standard Terminology Relating to Water

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1135 Standard Test Methods for Chemical Analysis of Blue Pigments

    D1139/D1139M Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

    D1141 Standard Practice for the Preparation of Substitute Ocean Water

    D1142 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1144 Standard Practice for Determining Strength Development of Adhesive Bonds

    D1146 Standard Test Method for Blocking Point of Potentially Adhesive Layers

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1151 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

    D1152 Standard Specification for Methanol (Methyl Alcohol)

    D1153 Standard Specification for Methyl Isobutyl Ketone1, 2

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1157 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D1159 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

    D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods

    D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials

    D1169 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1172 Standard Guide for pH of Aqueous Solutions of Soaps and Detergents

    D1173 Standard Test Method for Foaming Properties of Surface-Active Agents

    D1176 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

    D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants

    D1179 Standard Test Methods for Fluoride Ion in Water

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1184 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

    D1185 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping

    D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

    D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D1193 Standard Specification for Reagent Water

    D1195/D1195M Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1199 Standard Specification for Calcium Carbonate Pigments

    D1200 Standard Test Method for Viscosity by Ford Viscosity Cup

    D1201 Standard Specification for Thermosetting Polyester Molding Compounds

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

    D1208 Standard Test Methods for Common Properties of Certain Pigments

    D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

    D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1217 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

    D1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

    D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

    D1229 Standard Test Method for Rubber Property-Compression Set at Low Temperatures

    D1230 Standard Test Method for Flammability of Apparel Textiles

    D1234 Standard Test Method of Sampling and Testing Staple Length of Grease Wool

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1239 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

    D1240 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1243 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

    D1244 Standard Practice for Designation of Yarn Construction

    D1245 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy

    D1246 Standard Test Method for Bromide Ion in Water

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1250 Standard Guide for Use of the Petroleum Measurement Tables

    D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water

    D1253 Standard Test Method for Residual Chlorine in Water

    D1257 Standard Specification for High-Gravity Glycerin

    D1259 Standard Test Methods for Nonvolatile Content of Resin Solutions

    D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

    D1265 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

    D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils

    D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

    D1280 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

    D1282 Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool

    D1283 Standard Test Method for Alkali-Solubility of Wools

    D1287 Standard Test Method for pH of Engine Coolants and Antirusts

    D1290 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge

    D1291 Standard Practice for Estimation of Chlorine Demand of Water

    D1292 Standard Test Method for Odor in Water

    D1293 Standard Test Methods for pH of Water

    D1294 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length

    D1296 Standard Test Method for Odor of Volatile Solvents and Diluents

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments

    D1304 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

    D1305 Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type

    D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

    D1309 Standard Test Method for Settling Properties of Traffic Paints During Storage

    D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

    D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

    D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D1321 Standard Test Method for Needle Penetration of Petroleum Waxes

    D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

    D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

    D1329 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

    D1330 Standard Specification for Rubber Sheet Gaskets

    D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents

    D1334 Standard Test Method for Wool Content of Raw Wool-Commercial Scale

    D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

    D1336 Standard Test Method for Distortion of Yarn in Woven Fabrics

    D1337 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength

    D1338 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength

    D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

    D1348 Standard Test Methods for Moisture in Cellulose

    D1349 Standard Practice for Rubber—Standard Conditions for Testing

    D1351 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

    D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres

    D1357 Standard Practice for Planning the Sampling of the Ambient Atmosphere

    D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)

    D1363 Standard Test Method for Permanganate Time of Acetone and Methanol

    D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1366 Standard Practice for Reporting Particle Size Characteristics of Pigments

    D1369 Standard Practice for Quantities of Materials for Bituminous Surface Treatments

    D1370/D1370M Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

    D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

    D1385 Standard Test Method for Hydrazine in Water

    D1386 Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes

    D1387 Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes

    D1388 Standard Test Method for Stiffness of Fabrics

    D1394 Standard Test Methods for Chemical Analysis of White Titanium Pigments

    D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

    D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

    D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

    D1412 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C

    D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

    D1414 Standard Test Methods for Rubber O-Rings

    D1415 Standard Test Method for Rubber Property—International Hardness

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature

    D1422/D1422M Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method

    D1423 Standard Test Method for Twist in Yarns by Direct-Counting

    D1424 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus

    D1425/D1425M Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment

    D1426 Standard Test Methods for Ammonia Nitrogen In Water

    D1429 Standard Test Methods for Specific Gravity of Water and Brine

    D1430 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

    D1434 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

    D1435 Standard Practice for Outdoor Weathering of Plastics

    D1436 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes

    D1439 Standard Test Methods for Sodium Carboxymethylcellulose

    D1440 Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)

    D1441 Standard Practice for Sampling Cotton Fibers for Testing

    D1442 Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)

    D1445/D1445M Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)

    D1447 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement

    D1448 Standard Test Method for Micronaire Reading of Cotton Fibers

    D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1455 Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

    D1456 Standard Test Method for Rubber Property—Elongation at Specific Stress

    D1458 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation

    D1460 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion

    D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

    D1464 Standard Practice for Differential Dyeing Behavior of Cotton

    D1465 Standard Test Method for Blocking and Picking Points of Petroleum Wax

    D1474/D1474M Standard Test Methods for Indentation Hardness of Organic Coatings

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1476 Standard Test Method for Heptane Miscibility of Lacquer Solvents

    D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

    D1480 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

    D1481 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

    D1483 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method

    D1485 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

    D1488 Standard Test Method for Amylaceous Matter in Adhesives

    D1489 Standard Test Method for Nonvolatile Content of Aqueous Adhesives

    D1490 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions

    D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D1498 Standard Test Method for Oxidation-Reduction Potential of Water

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1506 Standard Test Methods for Carbon Black—Ash Content

    D1508 Standard Test Method for Carbon Black, Pelleted Fines and Attrition

    D1509 Standard Test Methods for Carbon Black—Heating Loss

    D1510 Standard Test Method for Carbon Black—Iodine Adsorption Number

    D1511 Standard Test Method for Carbon Black—Pellet Size Distribution

    D1512 Standard Test Methods for Carbon Black—pH Value

    D1513 Standard Test Method for Carbon Black, Pelleted—Pour Density

    D1514 Standard Test Method for Carbon Black - Sieve Residue

    D1516 Standard Test Method for Width of Leather

    D1517 Standard Terminology Relating to Leather

    D1518 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate

    D1519 Standard Test Method for Rubber Chemicals-Melting Range

    D1524 Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

    D1534 Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration

    D1535 Standard Practice for Specifying Color by the Munsell System

    D1544 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

    D1545 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method

    D1550 Standard ASTM Butadiene Measurement Tables

    D1552 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

    D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials

    D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

    D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

    D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D1560 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

    D1561/D1561M Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

    D1562 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

    D1566 Standard Terminology Relating to Rubber

    D1568 Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates

    D1569 Standard Test Methods for Detergent Alkylate

    D1570 Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates

    D1571/D1571M Standard Specification for Woven Asbestos Cloth

    D1573/D1573M Standard Test Method for Heat Aging of Asbestos Textiles

    D1574 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers

    D1575 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver

    D1576 Standard Test Method for Moisture in Wool by Oven-Drying

    D1577 Standard Test Methods for Linear Density of Textile Fibers

    D1578 Standard Test Method for Breaking Strength of Yarn in Skein Form

    D1579 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives

    D1582 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives

    D1583 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films

    D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1596 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

    D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

    D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

    D1600 Standard Terminology for Abbreviated Terms Relating to Plastics

    D1601 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1607 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)

    D1608 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)

    D1610 Standard Practice for Conditioning Leather and Leather Products for Testing

    D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

    D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D1614 Standard Test Method for Alkalinity in Acetone

    D1617 Standard Test Method for Ester Value of Solvents and Thinners

    D1618 Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract

    D1619 Standard Test Methods for Carbon Black—Sulfur Content

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622/D1622M Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1630 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

    D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1635/D1635M Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

    D1636 Standard Specification for Allyl Molding Compounds

    D1640 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

    D1644 Standard Test Methods for Nonvolatile Content of Varnishes

    D1646 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

    D1648 Standard Specification for Basic Lead Silicochromate Pigment

    D1649 Standard Specification for Strontium Chromate Pigment

    D1652 Standard Test Method for Epoxy Content of Epoxy Resins

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1655 Standard Specification for Aviation Turbine Fuels

    D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

    D1662 Standard Test Method for Active Sulfur in Cutting Oils

    D1665 Standard Test Method for Engler Specific Viscosity of Tar Products

    D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1668/D1668M Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

    D1669/D1669M Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings

    D1670/D1670M Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

    D1675 Standard Test Methods for Polytetrafluoroethylene Tubing

    D1676 Standard Test Methods for Film-Insulated Magnet Wire

    D1677 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

    D1681 Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure

    D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics

    D1684 Standard Practice for Lighting Cotton Classing Rooms for Color Grading

    D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

    D1687 Standard Test Methods for Chromium in Water

    D1688 Standard Test Methods for Copper in Water

    D1691 Standard Test Methods for Zinc in Water

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1695 Standard Terminology of Cellulose and Cellulose Derivatives

    D1696 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1710 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

    D1711 Standard Terminology Relating to Electrical Insulation

    D1712 Standard Practice for Resistance of Plastics to Sulfide Staining

    D1718 Standard Specification for Isobutyl Acetate (95% Grade)

    D1719 Standard Specification for Isobutyl Alcoholl

    D1720 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions

    D1722 Standard Test Method for Water Miscibility of Water-Soluble Solvents

    D1725 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

    D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

    D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1731 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting

    D1732 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

    D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D1739 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

    D1742 Standard Test Method for Oil Separation from Lubricating Grease During Storage

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1744 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent

    D1746 Standard Test Method for Transparency of Plastic Sheeting

    D1747 Standard Test Method for Refractive Index of Viscous Materials

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D1754/D1754M Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D1755 Standard Specification for Poly(Vinyl Chloride) Resins

    D1758 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes

    D1761 Standard Test Methods for Mechanical Fasteners in Wood

    D1762 Standard Test Method for Chemical Analysis of Wood Charcoal

    D1763 Standard Specification for Epoxy Resins

    D1765 Standard Classification System for Carbon Blacks Used in Rubber Products

    D1766 Standard Test Method for Rubber Chemicals - Solubility

    D1767 Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents

    D1768 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption

    D1770 Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top

    D1776 Standard Practice for Conditioning and Testing Textiles

    D1777 Standard Test Method for Thickness of Textile Materials

    D1779 Standard Specification for Adhesive for Acoustical Materials

    D1780 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1782 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials

    D1783 Standard Test Methods for Phenolic Compounds in Water

    D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

    D1786 Standard Specification for Toluene Diisocyanate

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1791 Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

    D1792 Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

    D1793 Standard Test Method for Water Spotting of Emulsion Floor Polishes

    D1795 Standard Test Method for Intrinsic Viscosity of Cellulose

    D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D1799 Standard Practice for Carbon Black—Sampling Packaged Shipments

    D1813 Standard Test Method for Measuring Thickness of Leather Test Specimens

    D1814 Standard Test Method for Measuring Thickness of Leather Units

    D1815 Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather

    D1816 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

    D1817 Standard Test Method for Rubber Chemicals—Density

    D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D1823 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D1826 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

    D1828 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures

    D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

    D1831 Standard Test Method for Roll Stability of Lubricating Grease

    D1833 Standard Test Method for Odor of Petroleum Wax

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1836 Standard Specification for Commercial Hexanes

    D1837 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

    D1844 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate

    D1845 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment

    D1849 Standard Test Method for Package Stability of Paint

    D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D1857/D1857M Standard Test Method for Fusibility of Coal and Coke Ash

    D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs

    D1864/D1864M Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

    D1865/D1865M Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

    D1867 Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring

    D1868 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D1871 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber

    D1874 Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases

    D1875 Standard Test Method for Density of Adhesives in Fluid Form

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1879 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation

    D1881 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware

    D1882 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

    D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

    D1886 Standard Test Methods for Nickel in Water

    D1890 Standard Test Method for Beta Particle Radioactivity of Water 

    D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

    D1895 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

    D1896/D1896M Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

    D1900 Standard Practice for Carbon Black - Sampling Bulk Shipments

    D1901 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures

    D1903 Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels

    D1907/D1907M Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method

    D1909 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers

    D1912 Standard Test Method for Cold-Crack Resistance of Upholstery Leather

    D1913 Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)

    D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

    D1917 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

    D1918/D1918M Standard Test Method for Asbestos Content of Asbestos Textiles

    D1921 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

    D1926 Standard Test Methods for Carboxyl Content of Cellulose

    D1929 Standard Test Method for Determining Ignition Temperature of Plastics

    D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

    D1933 Standard Specification for Nitrogen Gas as an Electrical Insulating Material

    D1934 Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method

    D1937 Standard Test Method for Carbon Black, Pelleted—Mass Strength

    D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

    D1941 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume

    D1943 Standard Test Method for Alpha Particle Radioactivity of Water 

    D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography

    D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography

    D1969 Standard Specification for 2-Ethylhexanol

    D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    D1971 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

    D1974/D1974M Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes

    D1975 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

    D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy

    D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

    D1978 Standard Guide for Analysis of Electrocoat Bath Samples

    D1981 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids

    D1982 Standard Test Method for Titer of Fatty Acids

    D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D1986 Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax

    D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters

    D1988 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

    D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

    D1991 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

    D1992 Standard Guide for Testing Synthetic Plasticizers Used in Rubber

    D1993 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

    D1994 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives

    D1995 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

    D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

    D1998 Standard Specification for Polyethylene Upright Storage Tanks

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2001 Standard Test Method for Depentanization of Gasoline and Naphthas

    D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

    D2008 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

    D2010/D2010M Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique

    D2013/D2013M Standard Practice for Preparing Coal Samples for Analysis

    D2014 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven

    D2022 Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches

    D2023 Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents

    D2024 Standard Test Method for Cloud Point of Nonionic Surfactants

    D2026/D2026M Standard Specification for Cutback Asphalt (Slow-Curing Type)

    D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2029 Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point

    D2035 Standard Practice for Coagulation-Flocculation Jar Test of Water

    D2036 Standard Test Methods for Cyanides in Water

    D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

    D2048 Standard Test Method for Powdering of Floor Polish Films

    D2050 Standard Terminology Relating to Fasteners and Closures Used with Textiles

    D2051 Standard Test Method for Durability of Finish of Zippers to Laundering

    D2052 Standard Test Method for Colorfastness of Zippers to Drycleaning

    D2053 Standard Test Method for Colorfastness of Zippers to Light

    D2054 Standard Test Method for Colorfastness of Zipper Tapes to Crocking

    D2057 Standard Test Method for Colorfastness of Zippers to Laundering

    D2058 Standard Test Method for Durability of Finish of Zippers to Drycleaning

    D2059/D2059M Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

    D2060 Standard Test Methods for Measuring Zipper Dimensions

    D2061 Standard Test Methods for Strength Tests for Zippers

    D2062 Standard Test Methods for Operability of Zippers

    D2063/D2063M Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

    D2064 Standard Test Method for Print Resistance of Architectural Paints

    D2065 : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress

    D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2070 Standard Test Method for Thermal Stability of Hydraulic Oils

    D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

    D2084 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

    D2086 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

    D2087 Standard Test Method for Iron in Formaldehyde Solutions

    D2091 Standard Test Method for Print Resistance of Lacquers

    D2093 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding

    D2094 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2096 Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather

    D2097 Standard Test Method for Flex Testing of Finish on Upholstery Leather

    D2098 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester

    D2099 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester

    D2100/D2100M Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes

    D2102 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)

    D2103 Standard Specification for Polyethylene Film and Sheeting

    D2105 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2106 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

    D2108 Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)

    D2109 Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

    D2110 Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures

    D2111 Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

    D2112 Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

    D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation

    D2115 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

    D2116 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

    D2118 Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its' Products

    D2119 Standard Test Method for Aldehydes in Styrene Monomer

    D2121 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)

    D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

    D2124 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

    D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2129 Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)

    D2130 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection

    D2131 Standard Classification for Natural Muscovite Mica Splittings

    D2132 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

    D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2140 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2144 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption

    D2148 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

    D2149 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C

    D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

    D2155 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

    D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

    D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

    D2158 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

    D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

    D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2163 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

    D2165 Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

    D2180 Standard Test Method for Active Oxygen in Bleaching Compounds

    D2187 Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins

    D2190 Standard Specification for Vinyl Acetate

    D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate

    D2192 Standard Test Method for Purity of Aldehydes and Ketones

    D2193 Standard Test Method for Hydroquinone in Vinyl Acetate

    D2194 Standard Test Method for Concentration of Formaldehyde Solutions

    D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

    D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

    D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

    D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

    D2202 Standard Test Method for Slump of Sealants

    D2203 Standard Test Method for Staining from Sealants

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2207 Standard Test Method for Bursting Strength of Leather by the Ball Method

    D2208 Standard Test Method for Breaking Strength of Leather by the Grab Method

    D2209 Standard Test Method for Tensile Strength of Leather

    D2210 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test

    D2211 Standard Test Method for Elongation of Leather

    D2212 Standard Test Method for Slit Tear Resistance of Leather

    D2213 Standard Test Method for Compressibility of Leather

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2218 Standard Specification for Molybdate Orange Pigments

    D2219 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation

    D2220 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation

    D2221 Standard Test Method for Creep Properties of Package Cushioning Materials

    D2222 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

    D2225 Standard Test Methods for Silicone Fluids Used for Electrical Insulation

    D2226 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

    D2227 Standard Specification for Natural Rubber (NR) Technical Grades

    D2228 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method

    D2229 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

    D2230 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds

    D2232 Test Method for Evaporation Residue of Naphthalene

    D2234/D2234M Standard Practice for Collection of a Gross Sample of Coal

    D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

    D2238 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

    D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D2245 Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2252 Standard Specification for Fineness of Types of Alpaca

    D2255/D2255M Standard Test Method for Grading Spun Yarns for Appearance

    D2256/D2256M Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method

    D2257 Standard Test Method for Extractable Matter in Textiles

    D2258 Standard Practice for Sampling Yarn for Testing

    D2259 Standard Test Method for Shrinkage of Yarns

    D2260 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems

    D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

    D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

    D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

    D2268 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

    D2269 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

    D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

    D2273 Standard Test Method for Trace Sediment in Lubricating Oils

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2275 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D2278 Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens

    D2281 Standard Test Method for Evaluation of Wetting Agents by the Skein Test

    D2284 Standard Test Method for Acidity of Sulfur Hexafluoride

    D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2290 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

    D2291 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

    D2293 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

    D2294 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

    D2295 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

    D2296 Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors

    D2300 Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)

    D2301 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

    D2303 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

    D2304 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

    D2305 Standard Test Methods for Polymeric Films Used for Electrical Insulation

    D2307 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire

    D2308 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2322 Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration

    D2331 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits

    D2332 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence

    D2337 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers

    D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers

    D2339 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

    D2340 Standard Test Method for Peroxides in Styrene Monomer

    D2343 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D2346 Standard Test Method for Apparent Density of Leather

    D2347 Standard Test Method for Measuring Area of Leather Test Specimens

    D2349 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

    D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints

    D2351 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints

    D2352 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints

    D2354 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles

    D2357 Standard for Qualitative Classification of Surfactants by Infrared Absorption

    D2358 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions

    D2359 Standard Specification for Refined Benzene-535

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D2363 Standard Test Methods for Hydroxypropyl Methylcellulose

    D2364 Standard Test Methods for Hydroxyethylcellulose

    D2369 Standard Test Method for Volatile Content of Coatings

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2371 Standard Test Method for Pigment Content of Solvent-Reducible Paints

    D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints

    D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method

    D2374 Standard Test Method for Lead in Paint Driers by EDTA Method

    D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method

    D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

    D2379 Standard Test Method for Acidity of Formaldehyde Solutions

    D2380 Standard Test Method for Methanol Content of Formaldehyde Solutions

    D2383 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

    D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2392 Standard Test Method for Color Of Dyed Aviation Gasolines

    D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

    D2395 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

    D2396 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

    D2397/D2397M Standard Specification for Cationic Emulsified Asphalt

    D2399 Standard Practice for Selection of Cutback Asphalts

    D2402 Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)

    D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    D2413 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric

    D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

    D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

    D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System

    D2423 Standard Test Method for Surface Wax on Waxed Paper or Paperboard

    D2425 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

    D2426 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2427 Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography

    D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2439 Standard Specification for Refined Phenol

    D2440 Standard Test Method for Oxidation Stability of Mineral Insulating Oil

    D2442 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

    D2444 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    D2448 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment

    D2449 Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings

    D2457 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

    D2460 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water

    D2462 Standard Test Method for Moisture in Wool by Distillation With Toluene

    D2463 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

    D2464 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

    D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2472 Standard Specification for Sulfur Hexafluoride

    D2475 Standard Specification for Felt

    D2477 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies

    D2484 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

    D2489/D2489M Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

    D2492 Standard Test Method for Forms of Sulfur in Coal

    D2493/D2493M Standard Viscosity-Temperature Chart for Asphalts

    D2494 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow

    D2495 Standard Test Method for Moisture in Cotton by Oven-Drying

    D2497 Standard Tolerances for Manufactured Organic-Base Filament Single Yarns

    D2500 Standard Test Method for Cloud Point of Petroleum Products

    D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

    D2502 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

    D2503 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

    D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

    D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

    D2509 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

    D2510 Standard Test Method for Adhesion of Solid Film Lubricants

    D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

    D2512 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)

    D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

    D2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC

    D2521/D2521M Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining

    D2522 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation

    D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

    D2524 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length

    D2525 Standard Practice for Sampling Wool for Moisture

    D2527 Standard Specification for Rubber Seals—Splice Strength

    D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2534 Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

    D2538 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

    D2549 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

    D2555 Standard Practice for Establishing Clear Wood Strength Values

    D2556 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry

    D2557 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D2561 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

    D2562 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

    D2563 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

    D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

    D2572 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

    D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

    D2574 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

    D2578 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

    D2580 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins

    D2589/D2589M Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

    D2590/D2590M Standard Test Method for Sampling Chrysotile Asbestos

    D2591 Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)

    D2593 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D2594 Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power

    D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

    D2596 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

    D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

    D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

    D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

    D2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

    D2612 Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)

    D2613 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

    D2616 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale

    D2617 Standard Test Method for Total Ash in Leather

    D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

    D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

    D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

    D2627 Standard Specification for Diacetone Alcohol

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D2633 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

    D2634 Standard Specification for Methyl Amyl Acetate (95?% Grade)

    D2635 Standard Specification for Methyl Isobutyl Carbinol

    D2636 Standard Specification for Hexylene Glycol

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2639/D2639M Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer

    D2643/D2643M Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)

    D2644 Standard Tolerances for Yarns Spun on the Woolen System

    D2645 Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems

    D2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings

    D2647 Standard Specification for Crosslinkable Ethylene Plastics

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2650 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry

    D2651 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

    D2652 Standard Terminology Relating to Activated Carbon

    D2653 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

    D2655 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

    D2656 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

    D2657 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

    D2658 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)

    D2659 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

    D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2663 Standard Test Methods for Carbon Black—Dispersion in Rubber

    D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2668 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption

    D2669 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

    D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

    D2673 Standard Specification for Oriented Polypropylene Film

    D2674 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum

    D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

    D2684 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

    D2685 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

    D2686 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

    D2687 Standard Practices for Sampling Particulate Ion-Exchange Materials

    D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

    D2692/D2692M Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns

    D2693 Standard Specification for Ethylene Glycol

    D2694 Standard Specification for Diethylene Glycol

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2698 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging

    D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D2702 Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

    D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

    D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)

    D2714 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

    D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum

    D2717 Standard Test Method for Thermal Conductivity of Liquids

    D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)

    D2719 Standard Test Methods for Structural Panels in Shear Through-the-Thickness

    D2720 Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions

    D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics

    D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2728 Standard Practice for Paving Uses and Application Temperatures for Road Tars

    D2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D2731 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

    D2732 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

    D2734 Standard Test Methods for Void Content of Reinforced Plastics

    D2737 Standard Specification for Polyethylene (PE) Plastic Tubing

    D2739 Standard Test Method for Volume Resistivity of Conductive Adhesives

    D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2745 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements

    D2746 Standard Test Method for Staining Tendency of Asphalt (Stain Index)

    D2749 Standard Symbols for Dimensions of Plastic Pipe Fittings

    D2752/D2752M Standard Test Methods for Air Permeability of Asbestos Fibers

    D2754 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape

    D2756 Standard Test Method for Weight Loss of Electrical Insulating Varnishes

    D2758 Standard Test Method for Engine Coolants by Engine Dynamometer

    D2759 Standard Practice for Sampling Gas from a Transformer Under Positive Pressure

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2766 Standard Test Method for Specific Heat of Liquids and Solids

    D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping

    D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

    D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

    D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

    D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D2786 Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

    D2789 Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

    D2791 Standard Test Method for On-line Determination of Sodium in Water

    D2792 Standard Test Method for Solvent and Fuel Resistance of Traffic Paint

    D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D2797/D2797M Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

    D2798 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal

    D2799 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal

    D2802 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D2807 Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)

    D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

    D2810 Standard Test Method for pH of Leather

    D2812 Standard Test Method for Non-Lint Content of Cotton

    D2813 Standard Practice for Sampling Leather for Physical and Chemical Tests

    D2816 Standard Test Method for Cashmere Coarse-Hair Content in Cashmere

    D2817 Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere

    D2821 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus

    D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing

    D2824/D2824M Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

    D2825 Standard Terminology Relating to Polishes and Related Materials

    D2827 Standard Specification for Styrene Monomer

    D2829 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

    D2832 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

    D2834 Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

    D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

    D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    D2838 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

    D2839 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

    D2847 Standard Practice for Testing Engine Coolants in Car and Light Truck Service

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2851 Standard Specification for Liquid Optical Adhesive

    D2852 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

    D2854 Standard Test Method for Apparent Density of Activated Carbon

    D2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

    D2857 Standard Practice for Dilute Solution Viscosity of Polymers

    D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    D2860/D2860M Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress

    D2861 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics

    D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D2864 Standard Terminology Relating to Electrical Insulating Liquids and Gases

    D2865M Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing

    D2866 Standard Test Method for Total Ash Content of Activated Carbon

    D2867 Standard Test Methods for Moisture in Activated Carbon

    D2868 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather

    D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D2875 Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather

    D2876 Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather

    D2878 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

    D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

    D2880 Standard Specification for Gas Turbine Fuel Oils

    D2881 Standard Classification for Metalworking Fluids and Related Materials

    D2883 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

    D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

    D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

    D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

    D2889 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

    D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

    D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

    D2893 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

    D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

    D2899 Standard Practice for Establishing Allowable Stresses for Round Timber Piles

    D2902 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

    D2903 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

    D2908 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography

    D2911 Standard Specification for Dimensions and Tolerances for Plastic Bottles

    D2913 Standard Test Method for Mercaptan Content of the Atmosphere

    D2914 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)

    D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

    D2916 Standard Specification for Isophorone

    D2917 Standard Specification for Methyl Isoamyl Ketone

    D2918 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel

    D2919 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

    D2921 Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products

    D2923 Standard Test Method for Rigidity of Polyolefin Film and Sheeting

    D2924 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2925 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

    D2929 Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence

    D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D2941 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)

    D2942 Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)

    D2943 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability

    D2944 Standard Practice of Sampling Processed Peat Materials

    D2946 Standard Terminology for Asbestos and Asbestos-Cement Products

    D2947/D2947M Standard Test Method for Screen Analysis of Asbestos Fibers

    D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D2959 Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants

    D2961 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize

    D2962 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

    D2967 Standard Test Method for Corner Coverage of Powder Coatings

    D2968 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection

    D2969 Standard Test Methods for Steel Tire Cords

    D2970/D2970M Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments

    D2972 Standard Test Methods for Arsenic in Water

    D2973 Standard Test Method for Total Nitrogen in Peat Materials

    D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2978 Standard Test Method for Volume of Processed Peat Materials

    D2979 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D2981 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

    D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

    D2985/D2985M Standard Test Method for Color of Asbestos

    D2987/D2987M Standard Test Method for Moisture Content of Asbestos Fiber

    D2988 Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures

    D2989 Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

    D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors

    D2996 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3002 Standard Guide for Evaluation of Coatings Applied to Plastics

    D3003 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

    D3004 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials

    D3005 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

    D3006 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape

    D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3013 Standard Specification for Epoxy Molding Compounds

    D3014 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3016 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

    D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

    D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

    D3021 Standard Specification for Phthalocyanine Green Pigments

    D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill

    D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

    D3025 Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards

    D3030 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

    D3032 Standard Test Methods for Hookup Wire Insulation

    D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

    D3038 Standard Test Method for Drop Shatter Test for Coke

    D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

    D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3043 Standard Test Methods for Structural Panels in Flexure

    D3044 Standard Test Method for Shear Modulus of Wood-Based Structural Panels

    D3045 Standard Practice for Heat Aging of Plastics Without Load

    D3048 Standard Test Method of Assay for Alkaline Protease

    D3049 Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration

    D3050 Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)

    D3052 Standard Practice for Rating Water-Emulsion Floor Polishes

    D3053 Standard Terminology Relating to Carbon Black

    D3056 Standard Test Method for Gel Time of Solventless Varnishes

    D3060 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products

    D3061 Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans

    D3064 Standard Terminology Relating To Aerosol Products

    D3065 Standard Test Methods for Flammability of Aerosol Products

    D3069 Standard Test Method for Delivery Rate of Aerosol Products

    D3070 Standard Test Method of Rapid Pressure Determination of Pressurized Products

    D3076 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers

    D3078 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

    D3079 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products

    D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D3082 Standard Test Method for Boron in Water

    D3084 Standard Practice for Alpha-Particle Spectrometry of Water

    D3087 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal

    D3089 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes

    D3090 Standard Practice for Storage Testing of Aerosol Products

    D3091 Standard Practice for Safe Filling of Low-Pressure Pressurized Products

    D3094 Standard Test Method for Seepage Rate of Aerosol Products

    D3103 Standard Test Method for Thermal Insulation Performance of Distribution Packages

    D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3105 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

    D3106 Standard Test Method for Permanent Deformation of Elastomeric Yarns

    D3107 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns

    D3108/D3108M Standard Test Method for Coefficient of Friction, Yarn to Solid Material

    D3111 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method

    D3115 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3121 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

    D3122 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

    D3123 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3124 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

    D3128 Standard Specification for 2-Methoxyethanol

    D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

    D3131 Standard Specification for Isopropyl Acetate (99?% Grade)

    D3134 Standard Practice for Establishing Color and Gloss Tolerances

    D3135 Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics

    D3136 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products

    D3137 Standard Test Method for Rubber Property—Hydrolytic Stability

    D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

    D3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    D3141/D3141M Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3144 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

    D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

    D3147 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants

    D3149 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

    D3150 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

    D3153 Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

    D3154 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3156 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

    D3157 Standard Test Method for Rubber from Natural Sources—Color

    D3159 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

    D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)

    D3161/D3161M Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

    D3162 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

    D3163 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

    D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

    D3165 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

    D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

    D3167 Standard Test Method for Floating Roller Peel Resistance of Adhesives

    D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints

    D3170/D3170M Standard Test Method for Chipping Resistance of Coatings

    D3171 Standard Test Methods for Constituent Content of Composite Materials

    D3172 Standard Practice for Proximate Analysis of Coal and Coke

    D3173 Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

    D3174 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

    D3175 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

    D3176 Standard Practice for Ultimate Analysis of Coal and Coke

    D3180 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

    D3181 Standard Guide for Conducting Wear Tests on Textiles

    D3182 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3184 Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

    D3185 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

    D3186 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

    D3187 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

    D3188 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

    D3189 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

    D3190 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)

    D3191 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

    D3192 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

    D3193 Standard Specification for Ethylbenzene

    D3194 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)

    D3195/D3195M Standard Practice for Rotameter Calibration

    D3198 Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures

    D3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles

    D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

    D3203/D3203M Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

    D3206 Standard Test Method for Soil Resistance of Floor Polishes

    D3207 Standard Test Method for Detergent Resistance of Floor Polish Films

    D3209 Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

    D3210 Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

    D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3217/D3217M Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations

    D3218 Standard Specification for Polyolefin Monofilaments

    D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3223 Standard Test Method for Total Mercury in Water

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231 Standard Test Method for Phosphorus in Gasoline

    D3233 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

    D3235 Standard Test Method for Solvent Extractables in Petroleum Waxes

    D3236 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

    D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3238 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

    D3239 Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

    D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3249 Standard Practice for General Ambient Air Analyzer Procedures

    D3251 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

    D3256 Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments

    D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

    D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining

    D3260 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

    D3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3265 Standard Test Method for Carbon Black—Tint Strength

    D3266 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)

    D3267 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

    D3268 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)

    D3270 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)

    D3271 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

    D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

    D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

    D3275 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

    D3276 Standard Guide for Painting Inspectors (Metal Substrates)

    D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    D3279 Standard Test Method for n-Heptane Insolubles

    D3280 Standard Test Methods for Analysis of White Zinc Pigments

    D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3283 Standard Specification for Air as an Electrical Insulating Material

    D3284 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters

    D3288/D3288M Standard Test Methods for Magnet-Wire Enamels

    D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D3291 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

    D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

    D3295 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

    D3296 Standard Specification for FEP-Fluorocarbon Tube

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3300 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions

    D3302/D3302M Standard Test Method for Total Moisture in Coal

    D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

    D3307 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

    D3308 Standard Specification for PTFE Resin Skived Tape

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

    D3312 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

    D3313 Standard Test Method for Carbon Black—Individual Pellet Hardness

    D3314 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

    D3316 Standard Test Method for Stability of Perchloroethylene with Copper

    D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

    D3321 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

    D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

    D3325 Standard Practice for Preservation of Waterborne Oil Samples

    D3326 Standard Practice for Preparation of Samples for Identification of Waterborne Oils

    D3328 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography

    D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

    D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

    D3332 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

    D3333 Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing

    D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

    D3336 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

    D3343 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

    D3344 Standard Test Method for Total Wax Content of Corrugated Paperboard

    D3345 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites

    D3346 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

    D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3349 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3352 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines

    D3353 Standard Test Methods for Fibrous-Insulated Magnet Wire

    D3354 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3367 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

    D3368 Standard Specification for FEP-Fluorocarbon Sheet and Film

    D3370 Standard Practices for Sampling Water from Closed Conduits

    D3372 Standard Test Method for Molybdenum in Water

    D3373 Standard Test Method for Vanadium in Water

    D3374/D3374M Standard Specification for Vinyl-Coated Glass Yarns

    D3375 Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials

    D3376 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

    D3377 Standard Test Method for Weight Loss of Solventless Varnishes

    D3380 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

    D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D3382 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D3393 Standard Specification for Coated Fabrics—Waterproofness

    D3394 Standard Test Methods for Sampling and Testing Electrical Insulating Board

    D3401 Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

    D3402/D3402M Standard Test Method for Tumbler Test for Coke

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers

    D3409 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces

    D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

    D3412/D3412M Standard Test Method for Coefficient of Friction, Yarn to Yarn

    D3414 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy

    D3415 Standard Practice for Identificaiton of Waterborne Oils

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3419 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

    D3420 Standard Test Method for Pendulum Impact Resistance of Plastic Film

    D3423/D3423M Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

    D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D3426 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves

    D3427 Standard Test Method for Air Release Properties of Petroleum Oils

    D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

    D3430 Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes

    D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

    D3434 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

    D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products

    D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

    D3440 Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

    D3443 Standard Test Method for Chloride in Trichlorotrifluoroethane

    D3444 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane

    D3448 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane

    D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3452 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography

    D3453 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

    D3454 Standard Test Method for Radium-226 in Water

    D3455 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

    D3456 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

    D3464 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer

    D3465 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

    D3466 Standard Test Method for Ignition Temperature of Granular Activated Carbon

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D3469 Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures

    D3470 Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures

    D3472 Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures

    D3474 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications

    D3475 Standard Classification of Child-Resistant Packages

    D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

    D3481 Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3483 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube

    D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

    D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

    D3489 Standard Test Methods for Microcellular Urethane Materials

    D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

    D3493 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)

    D3495 Standard Test Method for Hexane Extraction of Leather

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3499 Standard Test Method for Toughness of Wood-Based Structural Panels

    D3500 Standard Test Methods for Structural Panels in Tension

    D3501 Standard Test Methods for Wood-Based Structural Panels in Compression

    D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

    D3511/D3511M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester

    D3512/D3512M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester

    D3513 Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber

    D3514/D3514M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad

    D3516 Standard Test Methods for Ashing Cellulose

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3518/D3518M Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

    D3521 Standard Test Method for Surface Wax Coating On Corrugated Board

    D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

    D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

    D3525 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

    D3527 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

    D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

    D3529M Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg

    D3530 Standard Test Method for Volatiles Content of Composite Material Prepreg

    D3531/D3531M Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

    D3532/D3532M Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

    D3535 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

    D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer

    D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3543 Standard Test Method for Metal Glide Adhesion

    D3545 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

    D3546 Standard Test Method for Formic Acid in Glacial Acetic Acid

    D3548 Standard Specification for Ethyl Acrylate

    D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3552 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites

    D3554 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation

    D3555 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

    D3556 Standard Test Method for Deposition on Glassware During Mechanical Dishwashing

    D3557 Standard Test Methods for Cadmium in Water

    D3558 Standard Test Methods for Cobalt in Water

    D3559 Standard Test Methods for Lead in Water

    D3561 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

    D3562 Standard Performance Specification for Woven Drycleanable Coat Fabrics

    D3564 Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

    D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3568 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3576 Standard Test Method for Cell Size of Rigid Cellular Plastics

    D3577 Standard Specification for Rubber Surgical Gloves

    D3578 Standard Specification for Rubber Examination Gloves

    D3579 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

    D3580 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

    D3585 Standard Specification for ASTM Reference Fluid for Coolant Tests

    D3588 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels

    D3590 Standard Test Methods for Total Kjeldahl Nitrogen in Water

    D3591 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

    D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers

    D3595 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

    D3596 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

    D3597 Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked

    D3598 Standard Test Method for Citrate in Synthetic Detergents

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3606 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

    D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D3608 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction

    D3609 Standard Practice for Calibration Techniques Using Permeation Tubes

    D3610 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

    D3611 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes

    D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

    D3614 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions

    D3616 Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity

    D3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

    D3618 Standard Test Method for Detection of Lead in Paint and Dried Paint Films

    D3620 Standard Specification for Glacial Acetic Acid

    D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

    D3623 Standard Test Method for Testing Antifouling Panels in Shallow Submergence

    D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy

    D3625/D3625M Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

    D3628 Standard Practice for Selection and Use of Emulsified Asphalts

    D3631 Standard Test Methods for Measuring Surface Atmospheric Pressure

    D3632 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

    D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3634 Standard Test Method for Trace Chloride Ion in Engine Coolants

    D3635 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry

    D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

    D3638 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

    D3639/D3639M Standard Test Method for Classification of Asbestos by Quebec Standard Test

    D3641 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

    D3642 Standard Test Method for Softening Point of Certain Alkali-Soluble Resins

    D3643 Standard Test Method for Acid Number of Certain Alkali-Soluble Resins

    D3644 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins

    D3645 Standard Test Methods for Beryllium in Water

    D3647 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

    D3648 Standard Practices for the Measurement of Radioactivity

    D3649 Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water

    D3650 Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis

    D3651 Standard Test Method for Barium in Brackish Water, Seawater, and Brines

    D3652/D3652M Standard Test Method for Thickness of Pressure-Sensitive Tapes

    D3654/D3654M Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

    D3655 Standard Performance Specification for Men’s and Women’s Sliver Knitted Overcoat and Jacket Fabrics

    D3656/D3656M Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns

    D3657 Standard Specification for Zipper Dimensions

    D3658 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

    D3663 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

    D3664 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment

    D3665 Standard Practice for Random Sampling of Construction Materials

    D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3670 Standard Guide for Determination of Precision and Bias of Methods of Committee D22

    D3673 Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates

    D3675 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

    D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3677 Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry

    D3678 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3681 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

    D3682 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes

    D3683 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption

    D3685/D3685M Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases

    D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

    D3687 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

    D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3690 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor

    D3691/D3691M Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics

    D3692 Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings

    D3693 Standard Specification for Labeled Length per Holder of Sewing Thread

    D3694 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents

    D3695 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography

    D3697 Standard Test Method for Antimony in Water

    D3698 Standard Practice for Solvent Vapor Degreasing Operations

    D3699 Standard Specification for Kerosine

    D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

    D3705 Standard Test Method for Misting Properties of Lubricating Fluids

    D3707 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method

    D3708 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation

    D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

    D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

    D3712 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

    D3715/D3715M Standard Practice for Quality Assurance of Pressure-Sensitive Tapes

    D3716 Standard Test Methods for Use of Emulsion Polymers in Floor Polishes

    D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy

    D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

    D3720 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction

    D3721 Standard Specification for Synthetic Red Iron Oxide Pigment

    D3722 Standard Specification for Natural Red and Brown Iron Oxide Pigments

    D3723 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

    D3724 Standard Specification for Synthetic Brown Iron Oxide Pigment

    D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3731 Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters

    D3732 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

    D3734 Standard Specification for High-Flash Aromatic Naphthas

    D3735 Standard Specification for VM&P Naphthas

    D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

    D3738 Standard Specification for Rubber-Coated Cloth Hospital Sheeting

    D3739 Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis

    D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D3741 Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents

    D3744/D3744M Standard Test Method for Aggregate Durability Index

    D3745 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

    D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

    D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

    D3748 Standard Practice for Evaluating High-Density Rigid Cellular Plastics

    D3749 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

    D3751/D3751M Standard Practice for Evaluation of Furniture Polish

    D3752 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3755 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress

    D3756 Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields

    D3757 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes

    D3758 Standard Practice for Evaluation of Spray-Buff Products on Test Floors

    D3759/D3759M Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D3761 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

    D3762 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

    D3766 Standard Terminology Relating to Catalysts and Catalysis

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3768 Standard Test Method for Microcellular Urethanes—Flexural Recovery

    D3769 Standard Test Method for Microcellular Urethanes--High Temperature Sag

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3772 Standard Specification for Natural Rubber Finger Cots

    D3773/D3773M Standard Test Methods for Length of Woven Fabric

    D3774 Standard Test Method for Width of Textile Fabric

    D3775 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics

    D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric

    D3780 Standard Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics

    D3782 Standard Performance Specification for Men’s and Boys’ Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

    D3785 Standard Performance Specification for Woven Necktie and Scarf Fabrics

    D3786/D3786M Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method

    D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test

    D3790 Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying

    D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts

    D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

    D3794 Standard Guide for Testing Coil Coatings

    D3795 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3796 Standard Practice for Calibration of Type S Pitot Tubes

    D3800M Standard Test Method for Density of High-Modulus Fibers

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3803 Standard Test Method for Nuclear-Grade Activated Carbon

    D3804 Standard Test Method for Iron in Paint Driers by EDTA Method

    D3805/D3805M Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

    D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

    D3807 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

    D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion

    D3809 Standard Test Methods for Synthetic Dielectric Fluids For Capacitors

    D3810 Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures

    D3811/D3811M Standard Test Method for Unwind Force of Pressure-Sensitive Tapes

    D3813/D3813M Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

    D3815/D3815M Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus

    D3816/D3816M Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes

    D3822/D3822M Standard Test Method for Tensile Properties of Single Textile Fibers

    D3823 Standard Practice for Determining Ticket Numbers for Sewing Threads

    D3824 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method

    D3825 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

    D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

    D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D3832 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

    D3833/D3833M Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes

    D3835 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

    D3836 Standard Practice for Evaluation of Automotive Polish

    D3837 Standard Practice for Preparing a Solution of Alkali–Soluble Resins

    D3838 Standard Test Method for pH of Activated Carbon

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities

    D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

    D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

    D3848 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

    D3849 Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy

    D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

    D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials

    D3852 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

    D3853 Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding

    D3854 Standard Test Method for Rubber Thread-Resistance to Dry Heat

    D3855 Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment

    D3856 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water

    D3858 Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method

    D3859 Standard Test Methods for Selenium in Water

    D3860 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

    D3861 Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters

    D3862 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

    D3863 Standard Test Method for Retention Characteristics of 0.40 to 0.45-μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

    D3864 Standard Guide for On-Line Monitoring Systems for Water Analysis

    D3865 Standard Test Method for Plutonium in Water

    D3866 Standard Test Methods for Silver in Water

    D3867 Standard Test Methods for Nitrite-Nitrate in Water

    D3868 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines

    D3869 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines

    D3871 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling

    D3872 Standard Test Method for Ferrous Iron in Iron Oxides

    D3874 Standard Test Method for Ignition of Materials by Hot Wire Sources

    D3875 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines

    D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography

    D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

    D3878 Standard Terminology for Composite Materials

    D3880/D3880M Standard Test Method for Asbestos Strength Units

    D3882 Standard Test Method for Bow and Skew in Woven and Knitted Fabrics

    D3883 Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics

    D3884 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)

    D3885 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)

    D3886 Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)

    D3887 Standard Specification for Tolerances for Knitted Fabrics

    D3888 Standard Terminology for Yarn Spinning Systems

    D3889/D3889M Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature

    D3890 Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser

    D3891 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products

    D3892 Standard Practice for Packaging/Packing of Plastics

    D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D3896 Standard Practice for Rubber From Synthetic Sources—Sampling

    D3897 Standard Practice for Calculation of Basicity of Chrome Tanning Liquors

    D3898 Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors

    D3900 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

    D3902 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D3906 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

    D3907/D3907M Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D3908 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

    D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D3911 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

    D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants

    D3913 Standard Test Method for Acidity in Basic Chromium Tanning Liquors

    D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

    D3915 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications

    D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

    D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

    D3918 Standard Terminology Relating to Reinforced Plastic Pultruded Products

    D3919 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry

    D3920 Standard Test Method for Strontium in Water

    D3923 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices

    D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

    D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

    D3926 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries

    D3928 Standard Test Method for Evaluation of Gloss or Sheen Uniformity

    D3929 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

    D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

    D3931 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

    D3933 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)

    D3934 Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus

    D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

    D3937 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers

    D3938 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products

    D3939/D3939M Standard Test Method for Snagging Resistance of Fabrics (Mace)

    D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

    D3942 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

    D3943 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

    D3944 Standard Test Method for Solidification Point of Petroleum Wax

    D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)

    D3951 Standard Practice for Commercial Packaging

    D3953 Standard Specification for Strapping, Flat Steel and Seals

    D3954 Standard Test Method for Dropping Point of Waxes

    D3955 Standard Specification for Electrical Insulating Varnishes

    D3956 Standard Specification for Methane Thermophysical Property Tables

    D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

    D3958 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D3964 Standard Practice for Selection of Coating Specimens for Appearance Measurements

    D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D3968 Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures

    D3969 Standard Test Method for Zirconium in Paint Driers by EDTA Method

    D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

    D3971 Standard Test Method for Dichloromethane-Soluble Matter in Cellulose

    D3972 Standard Test Method for Isotopic Uranium in Water by Radiochemistry

    D3973 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water

    D3974 Standard Practices for Extraction of Trace Elements from Sediments

    D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments

    D3976 Standard Practice for Preparation of Sediment Samples for Chemical Analysis

    D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples

    D3978 Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata

    D3981 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

    D3982 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D3983 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

    D3984 Standard Specification for Ethane Thermophysical Property Tables

    D3985 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

    D3986 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D3987 Standard Practice for Shake Extraction of Solid Waste with Water

    D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method

    D3989 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

    D3990 Standard Terminology Relating to Fabric Defects

    D3991 Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade

    D3992 Standard Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade

    D3994 Standard Performance Specification for Woven Swimwear Fabrics

    D3995 Standard Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational

    D3996 Standard Performance Specification for Knit Swimwear Fabrics

    D3997/D3997M Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light

    D3999/D3999M Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

    D4000 Standard Classification System for Specifying Plastic Materials

    D4001 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering

    D4002 Standard Practice for Evaluation of Buffable Shoe Polish

    D4003 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems

    D4004 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis

    D4005 Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings

    D4006 Standard Test Method for Water in Crude Oil by Distillation

    D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4008 Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)

    D4009 Standard Guide for Foam Stability of Hand Dishwashing Detergents

    D4012 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

    D4016 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)

    D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

    D4018 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

    D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection

    D4026 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

    D4027 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

    D4028/D4028M Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn

    D4029/D4029M Standard Specification for Finished Woven Glass Fabrics

    D4030/D4030M Standard Specification for Glass Fiber Cord and Sewing Thread

    D4031 Standard Test Method for Bulk Properties of Textured Yarns

    D4032 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure

    D4035 Standard Performance Specification for Knitted Necktie and Scarf Fabrics

    D4037 Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics

    D4039 Standard Test Method for Reflection Haze of High-Gloss Surfaces

    D4040 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

    D4041/D4041M Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers

    D4042 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

    D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

    D4051 Standard Practice for Preparation of Low-Pressure Gas Blends

    D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

    D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4061 Standard Test Method for Retroreflectance of Horizontal Coatings

    D4062 Standard Test Method for Leveling of Paints by Draw-Down Method

    D4063 Standard Specification for Pressboard for Electrical Insulating Purposes

    D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

    D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4069 Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams

    D4070 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

    D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4073 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

    D4074/D4074M Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

    D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

    D4077 Standard Specification for Cumene (Isopropylbenzene)

    D4078 Standard Specification for Water Emulsion Floor Polish

    D4079 Standard Specification for Vapor-Degreasing Grade Methylene Chloride

    D4080 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade

    D4081 Standard Specification for Drycleaning-Grade Perchloroethylene

    D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

    D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

    D4084 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

    D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

    D4086 Standard Practice for Visual Evaluation of Metamerism

    D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties

    D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

    D4094 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers

    D4095 Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes

    D4096 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4102 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    D4103 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing

    D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4107 Standard Test Method for Tritium in Drinking Water

    D4111 Standard Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional

    D4112 Standard Performance Specification for Woven Umbrella Fabrics

    D4113 Standard Performance Specification for Woven Slipcover Fabrics

    D4114 Standard Performance Specification for Woven Flat Lining Fabrics for Women’s and Girls’ Apparel

    D4115 Standard Performance Specification for Women’s and Girls’ Knitted and Woven Dress Glove Fabrics

    D4116 Standard Performance Specification for Women’s and Girls’ Knitted and Woven Corset-Girdle-Combination Fabrics

    D4118 Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics

    D4119 Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics

    D4120 Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests

    D4122 Standard Practice for Carbon Black-Evaluation of an Industry Reference Black

    D4124 Standard Test Method for Separation of Asphalt into Four Fractions

    D4125/D4125M Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

    D4126 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane

    D4127 Standard Terminology Used with Ion-Selective Electrodes

    D4128 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry

    D4129 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection

    D4130 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines

    D4131 Standard Practice for Sampling Fish with Rotenone

    D4132 Standard Practice for Sampling Phytoplankton with Conical Tow Nets

    D4133 Standard Practice for Sampling Phytoplankton with Pumps

    D4134 Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler

    D4135 Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers

    D4136 Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles

    D4137 Standard Practice for Preserving Phytoplankton Samples

    D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

    D4139 Standard Guide for Determining Volatile and Nonvolatile Content of Pigments

    D4140 Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents

    D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

    D4142 Standard Guide for Testing Epoxy Resins

    D4143 Standard Guide for Testing Latex Vehicles

    D4144 Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing

    D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

    D4146 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

    D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar

    D4148 Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method

    D4149 Standard Classification for Sampling Phytoplankton in Surface Waters

    D4150 Standard Terminology Relating to Gaseous Fuels

    D4151 Standard Test Method for Flammability of Blankets

    D4153 Standard Performance Specification for Men’s, Women’s, and Children’s Woven Handkerchief Fabrics

    D4154 Standard Performance Specification for Men’s and Boys’ Knitted and Woven Beachwear and Sports Shirt Fabrics

    D4155 Standard Performance Specification for Women’s and Girls’ Woven Sportswear, Shorts, Slacks, and Suiting Fabrics

    D4156 Standard Performance Specification for Women’s and Girls’ Knitted Sportswear Fabrics

    D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

    D4158 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

    D4165 Standard Test Method for Cyanogen Chloride in Water 

    D4167 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

    D4168 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials

    D4169 Standard Practice for Performance Testing of Shipping Containers and Systems

    D4170 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    D4171 Standard Specification for Fuel System Icing Inhibitors

    D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D4174 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

    D4175 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4178 Standard Practice for Calibrating Moisture Analyzers

    D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

    D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

    D4185 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

    D4186/D4186M Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4188 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water

    D4189 Standard Test Method for Silt Density Index (SDI) of Water

    D4190 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D4191 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry

    D4192 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry

    D4193 Standard Test Method for Thiocyanate in Water

    D4194 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices

    D4195 Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application

    D4196 Standard Test Method for Confirming the Sterility of Membrane Filters

    D4198 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth

    D4199 Standard Test Methods for Autoclavability of Membrane Filters

    D4200 Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4204 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

    D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

    D4208 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

    D4209 Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

    D4211 Classification for Fish Sampling

    D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

    D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4217 Standard Test Method for Gel Time of Thermosetting Coating Powder

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

    D4220/D4220M Standard Practices for Preserving and Transporting Soil Samples

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4222 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

    D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4227 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

    D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

    D4230 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer

    D4231 Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts

    D4232 Standard Performance Specification for Men’s and Women’s Dress and Vocational Career Apparel Fabrics

    D4235 Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics

    D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

    D4239 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

    D4242 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders

    D4243 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

    D4245 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation

    D4246 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation

    D4251 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration

    D4252 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

    D4258 Standard Practice for Surface Cleaning Concrete for Coating

    D4259 Standard Practice for Abrading Concrete

    D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete

    D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

    D4262 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces

    D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

    D4265 Standard Guide for Evaluating Stain Removal Performance in Home Laundering

    D4266 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins

    D4267 Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers

    D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

    D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

    D4274 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

    D4275 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography

    D4276 Standard Practice for Confined Area Entry

    D4279 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods

    D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4282 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

    D4283 Standard Test Method for Viscosity of Silicone Fluids

    D4284 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

    D4285 Standard Test Method for Indicating Oil or Water in Compressed Air

    D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities

    D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer

    D4288 Standard Specification for Calcium Borosilicate Pigments

    D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

    D4291 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4293 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4295 Standard Classification for Rubber Compounding Materials—Zinc Oxide

    D4296 Standard Practice for Sampling Pitch

    D4297 Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)

    D4298 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

    D4300 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi

    D4301 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

    D4302 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints

    D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

    D4304 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

    D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4307 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

    D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water

    D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

    D4311/D4311M Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4313 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

    D4314 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable

    D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide

    D4316 Standard Specification for Elastomeric Water Bottles

    D4317 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

    D4321 Standard Test Method for Package Yield of Plastic Film

    D4323 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance

    D4325 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

    D4326 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence

    D4327 Standard Test Method for Anions in Water by Suppressed Ion Chromatography

    D4328 Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4330 Standard Practice for Evaluation of Fiberglass Boat Polish and Wax

    D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

    D4333/D4333M Test Method for the Compatibility of Mechanical Pump Dispenser Components

    D4334 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser

    D4335 Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser

    D4336 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser

    D4337 Standard Test Methods for Analysis of Linear Detergent Alkylates

    D4338 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend

    D4339 Standard Test Method for Determination of the Odor of Adhesives

    D4340 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

    D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4354 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing

    D4355/D4355M Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4360 Standard Specification for Methyl n-Amyl Ketone

    D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

    D4362 Standard Specification for Propane Thermophysical Property Tables

    D4363 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable

    D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

    D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

    D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

    D4370 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath

    D4371 Standard Test Method for Determining the Washability Characteristics of Coal

    D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4375 Standard Practice for Basic Statistics in Committee D-19 on Water

    D4376 Standard Specification for Vapor-Degreasing Grade Perchloroethylene

    D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D4380 Standard Test Method for Density of Bentonitic Slurries

    D4381/D4381M Standard Test Method for Sand Content by Volume of Bentonitic Slurries

    D4382 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

    D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4386 Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring

    D4388 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

    D4389/D4389M Standard Specification for Finished Glass Fabrics Woven From Rovings

    D4391 Standard Terminology Relating to The Burning Behavior of Textiles

    D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

    D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4396 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

    D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D4399 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths

    D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

    D4402/D4402M Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

    D4403 Standard Practice for Extensometers Used in Rock

    D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4409 Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters

    D4410 Terminology for Fluvial Sediment

    D4411 Standard Guide for Sampling Fluvial Sediment in Motion

    D4412 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits

    D4413 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology)

    D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages

    D4416 Standard Specification for Acrylic Acid

    D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

    D4418 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

    D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4423 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

    D4424 Standard Test Method for Butylene Analysis by Gas Chromatography

    D4425 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)

    D4426 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

    D4427 Standard Classification of Peat Samples by Laboratory Testing

    D4428/D4428M Standard Test Methods for Crosshole Seismic Testing

    D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

    D4430 Standard Practice for Determining the Operational Comparability of Meteorological Measurements

    D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

    D4435 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes

    D4438 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

    D4439 Standard Terminology for Geosynthetics

    D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

    D4441 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

    D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

    D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

    D4445 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)

    D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

    D4447 Standard Guide for Disposal of Laboratory Chemicals and Samples

    D4448 Standard Guide for Sampling Ground-Water Monitoring Wells

    D4449 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance

    D4450 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment

    D4451 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing

    D4452 Standard Practice for X-Ray Radiography of Soil Samples

    D4453 Standard Practice for Handling of High Purity Water Samples

    D4454 Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy

    D4455 Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure

    D4456 Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins

    D4457 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph

    D4458 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines

    D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4460 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

    D4462 Standard Specification for Zinc Hydroxy Phosphite Pigment

    D4463/D4463M Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

    D4464 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering

    D4465 Standard Performance Specification for Zippers for Denim Dungarees

    D4466 Standard Terminology Related to Multicomponent Textile Fibers

    D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

    D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

    D4470 Standard Test Method for Static Electrification

    D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

    D4472 Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems

    D4473 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

    D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

    D4476/D4476M Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4479/D4479M Standard Specification for Asphalt Roof Coatings - Asbestos-Free

    D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

    D4482 Test Method for Rubber Property - Extension Cycling Fatigue

    D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D4486 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D4487 Standard Test Methods for Analysis of Calcium Borosilicate

    D4489 Standard Practices for Sampling of Waterborne Oils

    D4490 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4494 Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

    D4495 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

    D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials

    D4497 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

    D4498 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives

    D4499 Standard Test Method for Heat Stability of Hot-Melt Adhesives

    D4501 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

    D4502 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

    D4504 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods

    D4505 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

    D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4508 Standard Test Method for Chip Impact Strength of Plastics

    D4510 Standard Test Method for Counting Partial Cleavages in Wool and Other Animal Fibers

    D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

    D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

    D4514 Standard Specification for Friction Tape

    D4516 Standard Practice for Standardizing Reverse Osmosis Performance Data

    D4517 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

    D4519 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity

    D4520 Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods

    D4522 Standard Performance Specification for Feather and Down Fillings for Textile Products

    D4524 Standard Test Method for Composition of Plumage

    D4525 Standard Test Method for Permeability of Rocks by Flowing Air

    D4526 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

    D4527 Standard Test Method for Carbon Black - Solvent Extractables

    D4528 Standard Classification for Rubber Compounding Materials—Sulfur

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4531 Standard Test Methods for Bulk Density of Peat and Peat Products

    D4532 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

    D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles

    D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities

    D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

    D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

    D4544 Standard Practice for Estimating Peat Deposit Thickness

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4547 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds

    D4548 Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins

    D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents

    D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

    D4559 Standard Test Method for Volatile Matter in Silicone Fluid

    D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

    D4563 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

    D4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

    D4566 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

    D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

    D4568 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials

    D4569 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

    D4570 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

    D4571 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

    D4572 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

    D4573 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

    D4574 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content

    D4575 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

    D4576 Standard Test Method for Mold Growth Resistance of Wet Blue

    D4577 Standard Test Method for Compression Resistance of a Container Under Constant Load

    D4578 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

    D4579 Standard Practice for Handling an Acid Degreaser or Still

    D4580/D4580M Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

    D4582 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis

    D4583 Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data

    D4584 Standard Test Method for Measuring Apparent pH of Electrocoat Baths

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4586/D4586M Standard Specification for Asphalt Roof Cement, Asbestos-Free

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D4591 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

    D4592 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

    D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles

    D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

    D4596 Standard Practice for Collection of Channel Samples of Coal in a Mine

    D4597 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers

    D4599 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

    D4600 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

    D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

    D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4603 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

    D4606 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method

    D4607 Standard Test Method for Determination of Iodine Number of Activated Carbon

    D4608 Standard Test Method for Citrate in Detergents

    D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

    D4610 Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings

    D4611 Standard Test Method for Specific Heat of Rock and Soil

    D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks

    D4614 Standard Specification for Ethyl Acetate (All Grades)

    D4615 Standard Specification for n-Butyl Acetate (All Grades)

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4618 Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application

    D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems

    D4620 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

    D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

    D4625 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)

    D4626 Standard Practice for Calculation of Gas Chromatographic Response Factors

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

    D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

    D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

    D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

    D4635 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications

    D4636 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4638 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

    D4640 Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins

    D4641 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms

    D4642 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

    D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method

    D4646 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments

    D4647/D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

    D4649 Standard Guide for Selection and Use of Stretch Wrap Films

    D4650 Standard Specification for Normal Butane Thermophysical Property Tables

    D4651 Standard Specification for Isobutane Thermophysical Property Tables

    D4652 Standard Specification for Silicone Fluid Used for Electrical Insulation

    D4653 Standard Test Method for Total Chlorides in Leather

    D4654 Standard Test Method for Sulfate Basicity in Leather

    D4655 Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)

    D4658 Standard Test Method for Sulfide Ion in Water

    D4659 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

    D4660 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

    D4661 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

    D4662 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

    D4663 Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates

    D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

    D4670 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols

    D4671 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols

    D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

    D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4675 Standard Guide for Selection and Use of Flat Strapping Materials1

    D4676 Standard Classification for Rubber Compounding Materials—Antidegradants

    D4677 Standard Classification for Rubber Compounding Materials—Titanium Dioxide

    D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

    D4679 Standard Specification for Rubber General Purpose, Household or Beautician Gloves

    D4680 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C

    D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4685 Standard Test Method for Pile Fabric Abrasion

    D4687 Standard Guide for General Planning of Waste Sampling

    D4688 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber

    D4689 Standard Specification for Adhesive, Casein-Type

    D4690 Standard Specification for Urea-Formaldehyde Resin Adhesives

    D4691 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry

    D4692 Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration

    D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695 Standard Guide for General Pavement Deflection Measurements

    D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

    D4698 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals

    D4699 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

    D4700 Standard Guide for Soil Sampling from the Vadose Zone

    D4701 Standard Specification for Technical Grade Methylene Chloride

    D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    D4704 Standard Test Method for Tearing Strength, Tongue Tear of Leather

    D4705 Standard Test Method for Stitch Tear Strength of Leather, Double Hole

    D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

    D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings

    D4709 Standard Specification for Methyl Acrylate

    D4710 Standard Specification for Acetaldehyde

    D4711 Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids

    D4713 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D4720 Standard Performance Specification for Soft Window Covering Fabrics for Household Use

    D4721 Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories

    D4723 Standard Classification Index of and Descriptions of Textile Flammability Test Methods

    D4724 Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion

    D4725 Standard Terminology for Engine Coolants and Related Fluids

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4727/D4727M Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

    D4728 Standard Test Method for Random Vibration Testing of Shipping Containers

    D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

    D4730 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

    D4731 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

    D4732 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

    D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes

    D4734 Standard Specification for Refined Benzene-545

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D4742 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

    D4745 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

    D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

    D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D4749 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size

    D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile

    D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

    D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

    D4755 Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures

    D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics

    D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

    D4762 Standard Guide for Testing Polymer Matrix Composite Materials

    D4763 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy

    D4764 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint

    D4765 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

    D4766 Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4768 Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography

    D4769 Standard Specification for Woven and Warp Knitted Comforter Fabrics

    D4771/D4771M Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture

    D4772 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)

    D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

    D4774 Standard Specification for User Applied Drug Labels in Anesthesiology

    D4775/D4775M Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)

    D4776/D4776M Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

    D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

    D4780 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

    D4781 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

    D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

    D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi

    D4784 Standard for LNG Density Calculation Models

    D4785 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water

    D4786 Standard Test Method for Stitch Tear Strength, Single Hole

    D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4788 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

    D4789 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals

    D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792/D4792M Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D4793 Standard Test Method for Sequential Batch Extraction of Waste with Water

    D4794 Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography

    D4795 Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

    D4799/D4799M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

    D4800 Standard Guide for Classifying and Specifying Adhesives

    D4801 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4810 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

    D4817 Standard Classification for Rubber Compounding Materials—Stearic Acid

    D4818 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

    D4819 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D4821 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias

    D4822 Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)

    D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

    D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

    D4827 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography

    D4828 Standard Test Methods for Practical Washability of Organic Coatings

    D4829 Standard Test Method for Expansion Index of Soils

    D4830/D4830M Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

    D4831 Standard Test Method for Buckle Tear Strength of Leather

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D4834 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy

    D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate

    D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

    D4837 Standard Specification for Propylene Glycol Monomethyl Ether

    D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

    D4839 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection

    D4840 Standard Guide for Sampling Chain-of-Custody Procedures

    D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents

    D4843 Standard Test Method for Wetting and Drying Test of Solid Wastes

    D4844 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

    D4845 Standard Terminology Relating to Wool

    D4846 Standard Test Method for Resistance to Unsnapping of Snap Fasteners

    D4847 Standard Performance Specification for Woven Awning and Canopy Fabrics

    D4848 Standard Terminology Related to Force, Deformation and Related Properties of Textiles

    D4849 Standard Terminology Related to Yarns and Fibers

    D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods

    D4851 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

    D4852 Standard Practice for Evaluation of Attached Upholstery Fabrics

    D4856 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

    D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4861 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

    D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

    D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

    D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D4871 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

    D4872 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds

    D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

    D4874 Standard Test Method for Leaching Solid Material in a Column Apparatus

    D4875 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

    D4877 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

    D4878 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

    D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock

    D4880 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

    D4881 Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

    D4882 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

    D4883 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D4884/D4884M Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

    D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method

    D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)

    D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

    D4888 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

    D4889 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

    D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

    D4891 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893 Standard Test Method for Determination of Pitch Volatility

    D4894 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

    D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

    D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

    D4898 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

    D4899 Standard Practice for Analysis of Vegetable Tanning Materials-General

    D4900 Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts

    D4901 Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts

    D4902 Standard Test Method for Evaporation and Drying of Analytical Solutions

    D4903 Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts

    D4904 Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts

    D4905 Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts

    D4906 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials

    D4907 Standard Test Method for Nitrocellulose in Finish on Leather

    D4910/D4910M Standard Tables of Body Measurements for Children, Infant Sizes—Preemie to 24 Months

    D4912/D4912M Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth

    D4913 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4919 Standard Specification for Testing of Hazardous Materials Packagings

    D4920 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties

    D4921 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature

    D4922 Standard Test Method for Determination of Radioactive Iron in Water

    D4924 Standard Classification for Petroleum Waxes for Use in Rubber Compounding

    D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction

    D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D4932/D4932M Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

    D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

    D4934 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

    D4935 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials

    D4936 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

    D4937 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

    D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water

    D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

    D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

    D4941 Standard Practice for Preparing Drawdowns of Artists' Paste Paints

    D4942 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4946 Standard Test Method for Blocking Resistance of Architectural Paints

    D4948 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid

    D4950 Standard Classification and Specification for Automotive Service Greases

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

    D4954 Standard Test Method for Determination of Nitrilotriacetates in Detergents

    D4955 Standard Practice for Field Evaluation of Automotive Polish

    D4956 Standard Specification for Retroreflective Sheeting for Traffic Control

    D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

    D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D4962 Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water

    D4963/D4963M Standard Test Method for Ignition Loss of Glass Strands and Fabrics

    D4964 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)

    D4966 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)

    D4967 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables

    D4968 Standard Guide for Annual Review of Test Methods and Specifications for Plastics

    D4969 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

    D4970/D4970M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester

    D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D4972 Standard Test Method for pH of Soils

    D4974 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven

    D4975 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D4977/D4977M Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

    D4978 Standard Test Methods for Screening of Reactive Sulfides in Waste

    D4979 Standard Test Method for Physical Description Screening Analysis in Waste

    D4981 Standard Test Method for Screening of Oxidizers in Waste

    D4982 Standard Test Methods for Flammability Potential Screening Analysis of Waste

    D4984 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

    D4985 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

    D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D4989/D4989M Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

    D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

    D4991 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

    D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D4993 Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis

    D4994 Standard Practice for Recovery of Viruses from Wastewater Sludges

    D4995 Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent

    D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

    D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    D5007 Standard Test Method for Wet-to-Dry Hiding Change

    D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

    D5009 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

    D5010 Standard Guide for Testing Printing Inks and Related Materials

    D5011 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards

    D5012 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition

    D5013 Standard Practices for Sampling Wastes from Pipes and Other Point Discharges

    D5015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

    D5016 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

    D5017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5023 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

    D5024 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

    D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5026 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

    D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

    D5029 Standard Test Method for Water Solubles in Activated Carbon

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5032 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

    D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

    D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

    D5040 Standard Test Methods for Ash Content of Adhesives

    D5041 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

    D5042 Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

    D5043 Standard Practice for Field Identification of Coatings

    D5044 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

    D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

    D5047 Standard Specification for Polyethylene Terephthalate Film and Sheeting

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5050 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

    D5051 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

    D5052 Standard Test Method for Permeability of Leather to Water Vapor

    D5053 Standard Test Method for Colorfastness of Crocking of Leather

    D5054 Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

    D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

    D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5057 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste

    D5058 Standard Practices for Compatibility of Screening Analysis of Waste

    D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

    D5061 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke

    D5062 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

    D5063 Standard Guide for Use of Certification of Coating Conformance Form

    D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

    D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

    D5067 Standard Specification for Artists' Watercolor Paints

    D5068 Standard Practice for Preparation of Paint Brushes for Evaluation

    D5069/D5069M Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

    D5070 Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations

    D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

    D5072 Standard Test Method for Radon in Drinking Water

    D5073 Standard Practice for Depth Measurement of Surface Water

    D5074 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

    D5075 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air

    D5076/D5076M Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

    D5077 Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

    D5078/D5078M Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

    D5079 Standard Practices for Preserving and Transporting Rock Core Samples

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5081/D5081M Standard Test Method for Aggregate Layer Hiding Power

    D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5085 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography

    D5086 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

    D5087 Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites

    D5089 Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

    D5090 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data

    D5091 Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications

    D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5094/D5094M Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

    D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

    D5096 Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

    D5098 Standard Specification for Artists' Acrylic Dispersion Paints

    D5099 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

    D5100/D5100M Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

    D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

    D5103 Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)

    D5105 Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

    D5108 Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

    D5109 Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards

    D5110 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

    D5111 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations

    D5112 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

    D5113 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam

    D5114 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell

    D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

    D5117 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

    D5118/D5118M Standard Practice for Fabrication of Fiberboard Shipping Boxes

    D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing

    D5124 Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation

    D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

    D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

    D5127 Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries

    D5128 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity

    D5129 Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions

    D5130 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method

    D5131 Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems

    D5132 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5134 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D5136 Standard Specification for High Purity p-Xylene

    D5137 Standard Specification for Hexyl Acetate

    D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

    D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

    D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

    D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

    D5145 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

    D5148 Standard Test Method for Centrifuge Kerosine Equivalent

    D5149 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5151 Standard Test Method for Detection of Holes in Medical Gloves

    D5153 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

    D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D5155 Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

    D5156 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

    D5157 Standard Guide for Statistical Evaluation of Indoor Air Quality Models

    D5158 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

    D5159 Standard Guide for Dusting Attrition of Granular Activated Carbon

    D5160 Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

    D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants

    D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

    D5165 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

    D5166 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

    D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

    D5168 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers

    D5169 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners

    D5170 Standard Test Method for Peel Strength (T Method) of Hook and Loop Touch Fasteners

    D5171 Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons

    D5172 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water

    D5173 Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity

    D5174 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry

    D5175 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography

    D5176 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection

    D5178 Standard Test Method for Mar Resistance of Organic Coatings

    D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

    D5181 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

    D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5186 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

    D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

    D5192 Standard Practice for Collection of Coal Samples from Core

    D5193/D5193M Standard Test Method for Coated Fabrics—Air Retention

    D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

    D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5196 Standard Guide for Bio-Applications Grade Water

    D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

    D5198 Standard Practice for Nitric Acid Digestion of Solid Waste

    D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5200 Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

    D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

    D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

    D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5204 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

    D5205 Standard Classification System for Polyetherimide (PEI) Materials

    D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5207 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5208 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5210 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5211 Standard Specification for Xylenes for p-Xylene Feedstock

    D5213 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

    D5215 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

    D5217 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials

    D5219 Standard Terminology Relating to Body Dimensions for Apparel Sizing

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5222 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils

    D5224 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

    D5225 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

    D5226 Standard Practice for Dissolving Polymer Materials

    D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

    D5228 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

    D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

    D5230 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

    D5231 Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

    D5232 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

    D5233 Standard Test Method for Single Batch Extraction Method for Wastes

    D5234 Standard Guide for Analysis of Ethylene Product

    D5235 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products

    D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

    D5237 Standard Guide for Evaluating Fabric Softeners

    D5238 Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5240/D5240M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

    D5241 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water

    D5242 Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

    D5243 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

    D5245 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses

    D5246 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water

    D5248 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane

    D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5250 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

    D5252 Standard Practice for the Operation of the Hexapod Tumble Drum Tester

    D5253 Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture

    D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site

    D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

    D5256 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits

    D5257 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

    D5258 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating

    D5259 Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure

    D5260 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles

    D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

    D5263 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

    D5264 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

    D5265 Standard Test Method for Bridge Impact Testing

    D5266 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

    D5267 Standard Test Method for Determination of Extrudability of Cartridge Adhesives

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5272 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

    D5273 Standard Guide for Analysis of Propylene Concentrates

    D5274 Standard Guide for Analysis of 1,3–Butadiene Product

    D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5276 Standard Test Method for Drop Test of Loaded Containers by Free Fall

    D5277 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester

    D5278/D5278M Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)

    D5279 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

    D5280 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions

    D5282 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation

    D5283 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation

    D5284 Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid

    D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

    D5287 Standard Practice for Automatic Sampling of Gaseous Fuels

    D5288 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

    D5289 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters

    D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5292 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

    D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5°C and –35°C Using Cold-Cranking Simulator

    D5295/D5295M Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

    D5296 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

    D5297 Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5299 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

    D5301 Standard Practice for Physical Characterization of Paint Brushes

    D5303 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

    D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    D5309 Standard Specification for Cyclohexane 999

    D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

    D5311/D5311M Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

    D5312/D5312M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

    D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone

    D5315 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization

    D5316 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography

    D5317 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5321/D5321M Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

    D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

    D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5325 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

    D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

    D5330/D5330M Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced

    D5331 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films

    D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5336 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

    D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

    D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

    D5340 Standard Test Method for Airport Pavement Condition Index Surveys

    D5341 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

    D5343 Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

    D5344 Standard Test Method for Extension Force of Partially Oriented Yarn

    D5346 Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds

    D5347 Standard Test Method for Determination of the Ash Content of Fats and Oils

    D5348 Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene

    D5349 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method

    D5350 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A

    D5351 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B

    D5352 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C

    D5353 Standard Test Method for Determination of Total Desulfated Fatty Matter

    D5354 Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils

    D5355 Standard Test Method for Specific Gravity of Oils and Liquid Fats

    D5356 Standard Test Method for PH of Chrome Tanning Solutions

    D5357 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

    D5358 Standard Practice for Sampling with a Dipper or Pond Sampler

    D5359 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

    D5360 Standard Practice for Design and Construction of Bituminous Surface Treatments

    D5361/D5361M Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

    D5362 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)

    D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

    D5365 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D5366 Standard Test Method for Determining the Dynamic Performance of a Wind Vane

    D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

    D5369 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction

    D5370 Standard Specification for Pozzolanic Blended Materials in Construction Applications

    D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D5373 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

    D5374 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

    D5375/D5375M Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

    D5376 Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

    D5377 Standard Classification for Rubber Compounding Materials—Ground Coal

    D5378 Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use

    D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

    D5380 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis

    D5381 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

    D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings

    D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

    D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5385/D5385M Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5387 Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments

    D5388 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method

    D5389 Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems

    D5390 Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes

    D5391 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

    D5392 Standard Test Method for Isolation and Enumeration ofEscherichia Coli in Water by the Two-Step Membrane Filter Procedure

    D5394 Standard Specification for Reclaimed 1,1,1-Trichloroethane

    D5395 Standard Specification for Reclaimed Methylene Chloride

    D5396 Standard Specification for Reclaimed Perchloroethylene

    D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

    D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

    D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

    D5400 Standard Test Methods for Hydroxypropylcellulose

    D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials

    D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

    D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

    D5406 Standard Practice for Rubber - Calculation of Producer's Process Performance Indexes

    D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors

    D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors

    D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors

    D5411 Standard Practice for Calculation of Average Energy Per Disintegration (E) for a Mixture of Radionuclides in Reactor Coolant

    D5412 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water

    D5413 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies

    D5414 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films

    D5415 Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing

    D5416 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing

    D5417 Standard Practice for Operation of the Vettermann Drum Tester

    D5418 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

    D5419 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5421 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5422 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5423 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

    D5424 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

    D5425 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

    D5426 Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints

    D5427 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics

    D5428 Standard Practice for Evaluating the Performance of Inflatable Restraint Modules

    D5430 Standard Test Methods for Visually Inspecting and Grading Fabrics

    D5431 Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use

    D5432 Standard Performance Specification for Blanket Products for Institutional and Household Use

    D5433 Standard Performance Specification for Towel Products for Institutional and Household Use

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

    D5436 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

    D5438 Standard Practice for Collection of Floor Dust for Chemical Analysis

    D5439 Standard Test Method for Determination of Sediment in Moellon

    D5440 Standard Test Method for Determining the Melting Point of Fats and Oils

    D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

    D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

    D5443 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography

    D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D5445 Standard Practice for Pictorial Markings for Handling of Goods

    D5446 Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints

    D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

    D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5451 Standard Practice for Sampling Using a Trier Sampler

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

    D5456 Standard Specification for Evaluation of Structural Composite Lumber Products

    D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

    D5458 Standard Test Method for Peel Cling of Stretch Wrap Film

    D5459 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

    D5460 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

    D5461 Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

    D5462 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water

    D5463 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water

    D5464 Standard Test Method for pH Measurement of Water of Low Conductivity

    D5465 Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods

    D5466 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

    D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

    D5468 Standard Test Method for Gross Calorific and Ash Value of Waste Materials

    D5469/D5469M Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

    D5470 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

    D5471 Standard Specification for O-Xylene 980

    D5472/D5472M Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

    D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

    D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations

    D5477 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

    D5478 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer

    D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

    D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

    D5483 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

    D5486/D5486M Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

    D5487 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines

    D5489 Standard Guide for Care Symbols for Care Instructions on Textile Products

    D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

    D5491 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

    D5492 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

    D5493 Standard Test Method for Permittivity of Geotextiles Under Load

    D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

    D5495 Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)

    D5496 Standard Practice for In Field Immersion Testing of Geosynthetics

    D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

    D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

    D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5503 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5505 Standard Practice for Classifying Emulsified Recycling Agents

    D5506 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials

    D5507 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

    D5508 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

    D5511 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

    D5513 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5515 Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

    D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

    D5517 Standard Test Method for Determining Extractability of Metals from Art Materials

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5521/D5521M Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

    D5523 Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

    D5526 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

    D5527 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means

    D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D5530 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

    D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

    D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D5536 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties

    D5537 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

    D5538 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations

    D5539 Standard Specification for Seed Starter Mix

    D5540 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis

    D5541 Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow

    D5542 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography

    D5543 Standard Test Methods for Low-Level Dissolved Oxygen in Water

    D5544 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

    D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D5547 Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption

    D5548 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)

    D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D5551 Standard Test Method for Determination of the Cloud Point of Oil

    D5552 Standard Test Method for Resistance of Colored Leather to Bleeding

    D5553 Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils

    D5554 Standard Test Method for Determination of the Iodine Value of Fats and Oils

    D5555 Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds

    D5556 Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds

    D5557 Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds

    D5558 Standard Test Method for Determination of the Saponification Value of Fats and Oils

    D5559 Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

    D5560 Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils

    D5562 Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps

    D5564 Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils

    D5565 Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

    D5566 Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils

    D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

    D5568 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies

    D5570/D5570M Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure

    D5571 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5573 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

    D5574 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

    D5575 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

    D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

    D5577 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

    D5578 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

    D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

    D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

    D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

    D5585 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00–20

    D5586/D5586M Standard Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)

    D5587 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure

    D5588 Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas

    D5589 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement

    D5590 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

    D5591 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester

    D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics

    D5594 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

    D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

    D5598 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D5599 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5604 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption

    D5605 Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values

    D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

    D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

    D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

    D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

    D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

    D5612 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program

    D5613 Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers

    D5614 Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

    D5615 Standard Test Method for Operating Characteristics of Home Reverse Osmosis Devices

    D5616 Standard Specification for Reclaimed Trichloroethylene

    D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics

    D5618 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

    D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

    D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5623 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

    D5624 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

    D5627 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins

    D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

    D5629 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

    D5630 Standard Test Method for Ash Content in Plastics

    D5631 Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)

    D5632/D5632M Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)

    D5633 Standard Practice for Sampling with a Scoop

    D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

    D5636/D5636M Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

    D5637 Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

    D5638 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

    D5639/D5639M Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

    D5640 Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

    D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber

    D5642 Standard Test Method for Sealed Tube Chemical Compatibility Test

    D5643/D5643M Standard Specification for Coal Tar Roof Cement, Asbestos Free

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5646 Standard Terminology Relating to Seams and Stitches Used in Home Sewing

    D5647 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus

    D5648 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

    D5649 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

    D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

    D5652 Standard Test Methods for Bolted Connections in Wood and Wood-Based Products

    D5656 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

    D5657 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

    D5658 Standard Practice for Sampling Unconsolidated Waste From Trucks

    D5659 Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC

    D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard

    D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

    D5665/D5665M Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

    D5666 Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

    D5667 Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

    D5668 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter

    D5670 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

    D5671 Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

    D5672 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique

    D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry

    D5674 Standard Guide for Operation of a Gaging Station

    D5675 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5678 Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

    D5679 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers

    D5680 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

    D5681 Standard Terminology for Waste and Waste Management

    D5682 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

    D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

    D5684 Standard Terminology Relating to Pile Floor Coverings

    D5685 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5687/D5687M Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

    D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D5710/D5710M Standard Specification for Trinidad Lake Modified Asphalt

    D5712 Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

    D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

    D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

    D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

    D5718 Standard Guide for Documenting a Groundwater Flow Model Application

    D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

    D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes

    D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

    D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure

    D5723 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

    D5724 Standard Specification for Gouache Paints

    D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

    D5727/D5727M Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

    D5728 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

    D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5737/D5737M Standard Guide for Methods for Measuring Well Discharge

    D5738 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses

    D5739 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry

    D5740 Standard Guide for Writing Material Standards in the Classification D4000 Format

    D5741 Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer

    D5742 Standard Test Method for Determination of Butane Activity of Activated Carbon

    D5743 Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers

    D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

    D5745 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

    D5746 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5748 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

    D5749 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

    D5750/D5750M Standard Guide for Width and Length of Pressure-Sensitive Tape

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5752 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

    D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging

    D5754 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses

    D5755 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

    D5756 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading

    D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

    D5758 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

    D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants

    D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5763 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

    D5764 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

    D5765 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating

    D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

    D5767 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces

    D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

    D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

    D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

    D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5774 Standard Test Methods for Rubber-Chemical Analysis of Extractables

    D5775 Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

    D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5779/D5779M Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control

    D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

    D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

    D5787 Standard Practice for Monitoring Well Protection

    D5788 Standard Guide for Spiking Organics into Aqueous Samples

    D5790 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry

    D5791 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

    D5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

    D5793 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings

    D5794 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography

    D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus

    D5796 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device

    D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

    D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5799 Standard Test Method for Determination of Peroxides in Butadiene

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D5805 Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches

    D5806 Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

    D5807 Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D5810 Standard Guide for Spiking into Aqueous Samples

    D5811 Standard Test Method for Strontium-90 in Water

    D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

    D5814 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

    D5817 Standard Practice for Carbon Black, Pelleted - Reduction, Blending, and Drying of Gross Samples for Testing

    D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics

    D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

    D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes

    D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D5822 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions

    D5823 Standard Test Method for Tuft Height of Pile Floor Coverings

    D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

    D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

    D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

    D5829 Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories

    D5830 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography

    D5831 Standard Test Method for Screening Fuels in Soils

    D5832 Standard Test Method for Volatile Matter Content of Activated Carbon Samples

    D5833 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans

    D5835 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations

    D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

    D5837 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)

    D5839 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry

    D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

    D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

    D5846 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

    D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis

    D5848 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings

    D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

    D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

    D5851 Standard Guide for Planning and Implementing a Water Monitoring Program

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D5853 Standard Test Method for Pour Point of Crude Oils

    D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

    D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

    D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

    D5857 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

    D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

    D5861 Standard Guide for Significance of Particle Size Measurements of Coating Powders

    D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D5864 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

    D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

    D5866 Standard Test Method for Neps in Cotton Fibers

    D5867 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments

    D5868 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

    D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

    D5870 Standard Practice for Calculating Property Retention Index of Plastics

    D5871 Standard Specification for Benzene for Cyclohexane Feedstock

    D5872/D5872M Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

    D5875/D5875M Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems

    D5880 Standard Guide for Subsurface Flow and Transport Modeling

    D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications

    D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

    D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners

    D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners

    D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

    D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

    D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

    D5896 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials

    D5897 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method

    D5898/D5898M Standard Guide for Standard Details for Adhered Sheet Waterproofing

    D5899 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

    D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

    D5902 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

    D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event

    D5904 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D5905 Standard Practice for the Preparation of Substitute Wastewater

    D5906 Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths

    D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

    D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

    D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

    D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5913 Standard Test Method for Evaluation of Cleanability of Paint Brushes

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D5919 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

    D5920 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method

    D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

    D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

    D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

    D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5927 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

    D5928 Standard Test Method for Screening of Waste for Radioactivity

    D5929 Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry

    D5930 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

    D5931 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

    D5932 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

    D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

    D5946 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

    D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

    D5948 Standard Specification for Molding Compounds, Thermosetting

    D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5952 Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)

    D5953M Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)

    D5954 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

    D5955 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM

    D5956 Standard Guide for Sampling Strategies for Heterogeneous Wastes

    D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations

    D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions

    D5959 Standard Test Method for Bulk Density of Level Paintbrush Filaments

    D5960 Standard Specification for Technical Grade Ethylene Dichloride

    D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

    D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

    D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

    D5965 Standard Test Methods for Specific Gravity of Coating Powders

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

    D5971/D5971M Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

    D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

    D5975 Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption

    D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

    D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems

    D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

    D5981 Standard Guide for Calibrating a Groundwater Flow Model Application

    D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

    D5987 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods

    D5988 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

    D5989 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

    D5991 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

    D5992 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

    D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

    D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane

    D5995 Standard Guide for Environmental Site Characterization in Cold Regions

    D5996 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography

    D5997 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D5998 Standard Specification for Molded Polyethylene Shipping and Storage Drums

    D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites

    D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

    D6004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

    D6005 Standard Test Method for Determining Slump Resistance of Carpet Adhesives

    D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6008 Standard Practice for Conducting Environmental Baseline Surveys

    D6009 Standard Guide for Sampling Waste Piles

    D6010 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices

    D6011 Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer

    D6012 Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer

    D6013 Standard Test Method for Determination of Area Stability of Leather to Laundering

    D6014 Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces

    D6015 Standard Test Method for Static Water Absorption of Leather

    D6016 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather

    D6017 Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather

    D6018 Standard Test Method for Determining the Presence of Lead Salts in Leather

    D6019 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)

    D6020 Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6022 Standard Practice for Calculation of Permanent Shear Stability Index

    D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes

    D6026 Standard Practice for Using Significant Digits in Geotechnical Data

    D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability

    D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

    D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

    D6035/D6035M Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

    D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

    D6039/D6039M Standard Specification for Open and Covered Wood Crates

    D6040 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6042 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

    D6044 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

    D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D6046 Standard Classification of Hydraulic Fluids for Environmental Impact

    D6047 Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

    D6048 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

    D6049 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

    D6050 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste

    D6051 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

    D6052 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence

    D6053 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

    D6055 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates

    D6056 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

    D6057 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

    D6058 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

    D6059 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

    D6060 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph

    D6061 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers

    D6062 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

    D6063 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

    D6064 Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

    D6065 Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

    D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6068 Standard Test Method for Determining J-R Curves of Plastic Materials

    D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D6070 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

    D6071 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

    D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners

    D6073 Standard Test Method for Relative Setting of Heatset Printing Inks

    D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6075 Standard Test Method for Cracking Resistance of Leather

    D6076 Standard Test Method for Shrinkage Temperature of Leather

    D6077 Standard Test Method for Trapezoid Tearing Strength of Leather

    D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

    D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

    D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6085 Standard Practice for Sampling in Rubber Testing - Terminology and Basic Concepts

    D6086 Standard Test Method for Carbon Black—Void Volume (VV)

    D6087 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

    D6088 Standard Practice for Installation of Geocomposite Pavement Drains

    D6089 Standard Guide for Documenting a Groundwater Sampling Event

    D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

    D6091 Standard Practice for 99?%/95?% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

    D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

    D6095 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

    D6096 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation

    D6097 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

    D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6099 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

    D6100 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

    D6102 Standard Guide for Installation of Geosynthetic Clay Liners

    D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

    D6105 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding

    D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers

    D6107 Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

    D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

    D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

    D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

    D6113 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

    D6114/D6114M Standard Specification for Asphalt-Rubber Binder

    D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6116 Standard Test Method for Blocking

    D6117 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

    D6119 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic

    D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    D6123/D6123M Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking

    D6124 Standard Test Method for Residual Powder on Medical Gloves

    D6126/D6126M Standard Specification for HFC-23 (Trifluoromethane, CHF3)

    D6127 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)

    D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6129 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

    D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    D6131 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments

    D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

    D6133 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

    D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

    D6136/D6136M Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

    D6137 Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

    D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

    D6141 Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6145 Standard Guide for Monitoring Sediment in Watersheds

    D6146 Standard Guide for Monitoring Aqueous Nutrients in Watersheds

    D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

    D6150 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

    D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D6153 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

    D6154 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

    D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6157 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release

    D6158 Standard Specification for Mineral Hydraulic Oils

    D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

    D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

    D6161 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

    D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

    D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6165 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials

    D6166 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

    D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

    D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6169/D6169M Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6170 Standard Guide for Selecting a Groundwater Modeling Code

    D6171 Standard Guide for Documenting a Groundwater Modeling Code

    D6172 Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures

    D6173 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

    D6174 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration

    D6175 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

    D6176 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors

    D6177 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets

    D6178 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

    D6179 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

    D6182 Standard Test Method for Flexibility and Adhesion of Finish on Leather

    D6183 Standard Test Method for Tackiness of Finish on Leather

    D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

    D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

    D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6188 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

    D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

    D6191 Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

    D6192 Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus

    D6193 Standard Practice for Stitches and Seams

    D6194 Standard Test Method for Glow-Wire Ignition of Materials

    D6195 Standard Test Methods for Loop Tack

    D6196 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

    D6197 Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests

    D6198 Standard Guide for Transport Packaging Design

    D6199 Standard Practice for Quality of Wood Members of Containers and Pallets

    D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

    D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6203 Standard Test Method for Thermal Stability of Way Lubricants

    D6204 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

    D6205 Standard Practice for Calibration of the James Static Coefficient of Friction Machine

    D6206 Standard Practice for Sampling of Coating Films

    D6207 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature

    D6208 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

    D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)

    D6210 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

    D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

    D6214/D6214M Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods

    D6216 Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6221/D6221M Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

    D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

    D6225/D6225M Standard Test Method for Granule Cover of Mineral Surfaced Roofing

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

    D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

    D6231 Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)

    D6232 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

    D6233 Standard Guide for Data Assessment for Environmental Waste Management Activities

    D6234 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure

    D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

    D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6238 Standard Test Method for Total Oxygen Demand in Water

    D6239 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry

    D6240/D6240M Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall

    D6241 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

    D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

    D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

    D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

    D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers

    D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6248 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

    D6250 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

    D6251/D6251M Standard Specification for Wood-Cleated Panelboard Shipping Boxes

    D6252/D6252M Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

    D6253 Standard Practice for Treatment and/or Marking of Wood Packaging Materials

    D6254/D6254M Standard Specification for Wirebound Pallet-Type Wood Boxes

    D6255/D6255M Standard Specification for Steel or Aluminum Slotted Angle Crates

    D6256/D6256M Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

    D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6263 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

    D6264/D6264M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

    D6265 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

    D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D6267/D6267M Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

    D6268 Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)

    D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications

    D6271 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol

    D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

    D6273 Standard Test Methods for Natural Gas Odor Intensity

    D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

    D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

    D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

    D6280 Standard Specification for Zinc Phosphate Pigments

    D6281 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

    D6282/D6282M Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations

    D6283 Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings

    D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

    D6285 Standard Guide for Locating Abandoned Wells

    D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6287 Standard Practice for Cutting Film and Sheeting Test Specimens

    D6288 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing

    D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

    D6290 Standard Test Method for Color Determination of Plastic Pellets

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6295/D6295M Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape

    D6296 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

    D6297 Standard Specification for Asphaltic Plug Joints for Bridges

    D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

    D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6301 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water

    D6302 Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins

    D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

    D6306 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

    D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

    D6311 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design

    D6312 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs

    D6316 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

    D6317 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D6318 Standard Practice for Calibrating a Fathometer Using a Bar Check Method

    D6319 Standard Specification for Nitrile Examination Gloves for Medical Application

    D6320/D6320M Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel

    D6321/D6321M Standard Practice for the Evaluation of Machine Washable T-Shirts

    D6322 Standard Guide to International Test Methods Associated with Textile Care Procedures

    D6323 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities

    D6324 Standard Test Methods for Male Condoms Made from Polyurethane

    D6325 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

    D6326 Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers

    D6327 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

    D6328 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition

    D6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

    D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

    D6331 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

    D6332 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

    D6333 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6335 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

    D6336 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

    D6337 Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics

    D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

    D6340 Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment

    D6341 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)

    D6342 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

    D6343 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

    D6344 Standard Test Method for Concentrated Impacts to Transport Packages

    D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

    D6346 Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs

    D6347/D6347M Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

    D6348 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

    D6349 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

    D6350 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

    D6351 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

    D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

    D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6355 Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

    D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

    D6357 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry

    D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

    D6360 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

    D6361/D6361M Standard Guide for Selecting Cleaning Agents and Processes

    D6362 Standard Practice for Certificates of Reference Materials for Water Analysis

    D6363 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

    D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics

    D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

    D6367 Standard Specification for AMS (α-Methylstyrene)

    D6368 Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

    D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes

    D6370 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)

    D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6372 Standard Practice for Design, Testing, and Construction of Micro-Surfacing

    D6373 Standard Specification for Performance Graded Asphalt Binder

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

    D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6380/D6380M Standard Specification for Asphalt Roll Roofing (Organic Felt)

    D6381/D6381M Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

    D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

    D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

    D6384 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

    D6385 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

    D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

    D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

    D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

    D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6394 Standard Specification for Sulfone Plastics (SP)

    D6395 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

    D6396 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees

    D6398 Standard Practice to Enhance Identification of Drug Names on Labels

    D6399 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

    D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6401 Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials

    D6402 Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials

    D6403 Standard Test Method for Determining Moisture in Raw and Spent Materials

    D6404 Standard Practice for Sampling Vegetable Materials Containing Tannin

    D6405 Standard Practice for Extraction of Tannins from Raw and Spent Materials

    D6406 Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials

    D6407 Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials

    D6408 Standard Test Method for Analysis of Tannery Liquors

    D6409 Standard Practice for Color Tests with Sheepskin Skiver

    D6410 Standard Test Method for Determining Acidity of Vegetable Tanning Liquors

    D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

    D6412/D6412M Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

    D6413/D6413M Standard Test Method for Flame Resistance of Textiles (Vertical Test)

    D6414 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

    D6415/D6415M Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

    D6416/D6416M Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

    D6417 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

    D6418 Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis

    D6419 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

    D6420 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

    D6421 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

    D6423 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)

    D6424 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

    D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

    D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6427/D6427M Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)

    D6429 Standard Guide for Selecting Surface Geophysical Methods

    D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation

    D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

    D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6436 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

    D6437 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)

    D6438 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography

    D6439 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

    D6440 Standard Terminology Relating to Hydrocarbon Resins

    D6441 Standard Test Methods for Measuring the Hiding Power of Powder Coatings

    D6442 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

    D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6451/D6451M Standard Guide for Application of Asphalt Based Protection Board

    D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations

    D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)

    D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

    D6456 Standard Specification for Finished Parts Made from Polyimide Resin

    D6457 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

    D6458 Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular

    D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D6461 Standard Specification for Silt Fence Materials

    D6462 Standard Practice for Silt Fence Installation

    D6463/D6463M Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

    D6464 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

    D6466 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6471 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service

    D6472 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service

    D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6474 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

    D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

    D6476 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics

    D6477 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

    D6478 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints

    D6479 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints

    D6480 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy

    D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

    D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

    D6485 Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

    D6486 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings

    D6487 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press

    D6488 Standard Terminology Relating to Print Problems

    D6489 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

    D6490 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

    D6491 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

    D6492 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

    D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

    D6494 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

    D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

    D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

    D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

    D6498 Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations

    D6499 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

    D6500 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser

    D6501 Standard Test Method for Phosphonate in Brines

    D6502 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)

    D6503 Standard Test Method for Enterococci in Water Using Enterolert

    D6504 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water

    D6505 Standard Test Method for Assay of normal-Propyl Bromide Content

    D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing

    D6507 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials

    D6508 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

    D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

    D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems

    D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds

    D6512 Standard Practice for Interlaboratory Quantitation Estimate

    D6513 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests

    D6514 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

    D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

    D6517 Standard Guide for Field Preservation of Groundwater Samples

    D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

    D6520 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds

    D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

    D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

    D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)

    D6525/D6525M Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D6529 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50–1000 μS/cm

    D6530 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)

    D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6534 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser

    D6535/D6535M Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser

    D6536/D6536M Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

    D6537 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance

    D6538 Standard Guide for Sampling Wastewater With Automatic Samplers

    D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6540 Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering

    D6541 Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH 2CF3)

    D6542 Standard Practice for Tonnage Calculation of Coal in a Stockpile

    D6543 Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers

    D6544 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing

    D6545 Standard Test Method for Flammability of Textiles Used in Children's Sleepwear

    D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

    D6547 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

    D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

    D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

    D6551/D6551M Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

    D6552 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

    D6553 Standard Test Method for Coolant Compatibility of Way Lubricants

    D6554/D6554M Standard Specification for 100?% Cotton Denim Fabrics

    D6555 Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies

    D6556 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6561 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

    D6562 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D6564 Standard Guide for Field Filtration of Groundwater Samples

    D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats

    D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)

    D6568 Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples

    D6569 Standard Test Method for On-Line Measurement of pH

    D6570 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6573/D6573M Standard Specification for General Purpose Wirebound Shipping Boxes

    D6574/D6574M Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

    D6575 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

    D6576 Standard Specification for Flexible Cellular Rubber Chemically Blown

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M Standard Practice for Determination of Graffiti Resistance

    D6579 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

    D6580 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

    D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6584 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

    D6585 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6586 Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests

    D6587 Standard Test Method for Yarn Number Using Automatic Tester

    D6588/D6588M Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)

    D6589 Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance

    D6590/D6590M Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans

    D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

    D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6596 Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

    D6597 Standard Practice for Assessment of Attaining Clean Up Level for Site Closure

    D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

    D6599 Standard Practice for Construction of Live Fascines on Slopes

    D6600 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

    D6601 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

    D6602 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

    D6603 Standard Specification for Labeling of UV-Protective Textiles

    D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

    D6605 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

    D6606 Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

    D6607 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

    D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6609 Standard Guide for Part-Stream Sampling of Coal

    D6611 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance

    D6612 Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester

    D6613 Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric

    D6614 Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

    D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

    D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6619 Standard Practice for Incorporating Pigments by High Speed Dispersion

    D6620 Standard Practice for Asbestos Detection Limit Based on Counts

    D6621 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

    D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

    D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

    D6625 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus

    D6626 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    D6627/D6627M Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

    D6628 Standard Specification for Color of Pavement Marking Materials

    D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion

    D6630 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

    D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

    D6633 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

    D6634/D6634M Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

    D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

    D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

    D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

    D6640 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

    D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

    D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

    D6643 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance

    D6644 Standard Test Method for Tension Strength of Sew-Through Flange Buttons

    D6645 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

    D6646 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

    D6647 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

    D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

    D6654 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

    D6655 Standard Terminology Relating to Mechanical Pump Dispensers

    D6656 Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)

    D6657 Standard Test Method for pH of Wet Blue

    D6658 Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying

    D6659 Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests

    D6660 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

    D6661 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

    D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

    D6663 Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use

    D6665 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

    D6666 Standard Guide for Evaluation of Aqueous Polymer Quenchants

    D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6669 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

    D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

    D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

    D6672 Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines

    D6673 Standard Practice for Sewn Products Pattern Data Interchange-Data Format

    D6674 Standard Guide for Proficiency Test Program for Fabrics

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6676/D6676M Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating

    D6677 Standard Test Method for Evaluating Adhesion by Knife

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

    D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)

    D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

    D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof

    D6688 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

    D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

    D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

    D6694/D6694M Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D6696 Standard Guide for Understanding Cyanide Species

    D6698 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

    D6699 Standard Practice for Sampling Liquids Using Bailers

    D6700 Standard Practice for Use of Scrap Tire-Derived Fuel

    D6703 Standard Test Method for Automated Heithaus Titrimetry

    D6704 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

    D6705/D6705M Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

    D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

    D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

    D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

    D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

    D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6713 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

    D6714 Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)

    D6715 Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests

    D6716 Standard Test Method for Total Ash in Wet Blue or Wet White

    D6717 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)

    D6719 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering

    D6720 Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)

    D6721 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

    D6722 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

    D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

    D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction

    D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron

    D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6729 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

    D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

    D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

    D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

    D6734 Standard Test Method for Low Levels of Coliphages in Water

    D6735 Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method

    D6736 Standard Test Method for Burnish Resistance of Latex Paints

    D6737 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments

    D6738 Standard Test Method for Precipitated Silica - Volatile Content

    D6739 Standard Test Method for Silica - pH Value

    D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

    D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

    D6742/D6742M Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

    D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

    D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

    D6753/D6753M Standard Specification for Coal Tar Adhesive

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

    D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6759 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

    D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

    D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

    D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6764 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

    D6765 Standard Practice for Live Staking

    D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

    D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

    D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners

    D6769/D6769M Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

    D6770 Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)

    D6772 Standard Test Method for Dimensional Stability of Sandwich Core Materials

    D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6774 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester

    D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material

    D6777 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

    D6778 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

    D6779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

    D6780/D6780M Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)

    D6781 Standard Guide for Carbon Reactivation

    D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

    D6783 Standard Specification for Polymer Concrete Pipe

    D6784 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

    D6785 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

    D6786 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters

    D6787/D6787M Standard Specification for Repositionable Note Pad

    D6788 Standard Specification for Repositionable Pressure-Sensitive Flags

    D6790/D6790M Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6?h) Heating Time

    D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

    D6796 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

    D6797 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test

    D6798 Standard Terminology Relating to Flax and Linen

    D6799 Standard Terminology Relating to Inflatable Restraints

    D6800 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

    D6801 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

    D6802 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry

    D6803 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers

    D6804 Standard Guide for Hand Hole Design in Corrugated Boxes

    D6805 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions

    D6806 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography

    D6807 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm

    D6808 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis

    D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

    D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

    D6812 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

    D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

    D6814 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

    D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

    D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

    D6818 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products

    D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

    D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

    D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D6825 Standard Guide for Placement of Riprap Revetments

    D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills

    D6827 Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)

    D6828 Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure

    D6829 Standard Tables of Body Measurements for Juniors, Sizes 0 to 19

    D6830 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

    D6831 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    D6832 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

    D6834 Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser

    D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

    D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6839 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

    D6840 Standard Test Method for Effect of Drycleaning on Buttons

    D6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

    D6842 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

    D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

    D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

    D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

    D6846 Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

    D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

    D6850 Standard Guide for QC of Screening Methods in Water

    D6851 Standard Test Method for Determination of Contact pH with Activated Carbon

    D6854 Standard Test Method for Silica-Oil Absorption Number

    D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode

    D6856/D6856M Standard Guide for Testing Fabric-Reinforced Textile Composite Materials

    D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

    D6860/D6860M Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky

    D6862 Standard Test Method for 90 Degree Peel Resistance of Adhesives

    D6864 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

    D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&

    D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6867 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

    D6868 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

    D6871 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

    D6873/D6873M Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

    D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

    D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

    D6877 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

    D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

    D6880/D6880M Standard Specification for Wood Boxes

    D6881/D6881M Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density

    D6883 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

    D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

    D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

    D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

    D6888 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D6889 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

    D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

    D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D6897 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

    D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D6901 Standard Specification for Artists' Colored Pencils

    D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

    D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D6905 Standard Test Method for Impact Flexibility of Organic Coatings

    D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

    D6907 Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers

    D6908 Standard Practice for Integrity Testing of Water Filtration Membrane Systems

    D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

    D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

    D6915 Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks

    D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

    D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

    D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

    D6919 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography

    D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6925 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

    D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

    D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

    D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D6929 Standard Practice for Freezing of Emulsified Asphalts

    D6930 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

    D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

    D6932/D6932M Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

    D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6937 Standard Test Method for Determining Density of Emulsified Asphalt

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D6942 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments

    D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings

    D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling

    D6945/D6945M Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

    D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

    D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

    D6948/D6948M Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

    D6950/D6950M Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

    D6951/D6951M Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    D6954 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

    D6956 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use

    D6957 Standard Practice for Measuring Curl in Paint Brush Filling Material

    D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

    D6959 Standard Practice for Data Exchange Format for Sewn Product Plotting Devices

    D6961/D6961M Standard Test Method for Color Measurement of Flax Fiber

    D6962 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings

    D6963 Standard Terminology Relating to Sewn Products Automation

    D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

    D6968 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

    D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D6971 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

    D6975 Standard Test Method for Cummins M11 EGR Test

    D6976 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms

    D6977 Standard Specification for Polychloroprene Examination Gloves for Medical Application

    D6978 Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

    D6979 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

    D6980 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

    D6982 Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns

    D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

    D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D6988 Standard Guide for Determination of Thickness of Plastic Film Test Specimens

    D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions

    D6990 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

    D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

    D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D6994 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

    D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

    D6997 Standard Test Method for Distillation of Emulsified Asphalt

    D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D6999 Standard Practice for Miscibility of Emulsified Asphalts

    D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

    D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

    D7002 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System

    D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

    D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

    D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

    D7006 Standard Practice for Ultrasonic Testing of Geomembranes

    D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials

    D7008 Standard Specification for Geosynthetic Alternate Daily Covers

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses

    D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

    D7016/D7016M Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame

    D7017 Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics

    D7018/D7018M Standard Terminology Relating to Glass Fiber and Its Products

    D7019 Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics

    D7020 Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics

    D7021 Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics

    D7022 Standard Terminology Relating to Apparel

    D7023 Standard Terminology Relating to Home Furnishings

    D7025 Standard Test Method for Assessing Clean Flax Fiber Fineness

    D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

    D7027 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

    D7028 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

    D7029 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]

    D7030 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

    D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

    D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

    D7033 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

    D7034 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations

    D7035 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7036 Standard Practice for Competence of Air Emission Testing Bodies

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

    D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

    D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

    D7045 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

    D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)

    D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

    D7049 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

    D7050 Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties

    D7051 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

    D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

    D7054 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

    D7059 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

    D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7064/D7064M Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

    D7065 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

    D7066 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

    D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

    D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7076 Standard Test Method for Measurement of Shives in Retted Flax

    D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

    D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

    D7083 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

    D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

    D7085 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

    D7087 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

    D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

    D7089 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

    D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

    D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

    D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT

    D7098 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

    D7099 Standard Terminology Relating to Frozen Soil and Rock

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7102 Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

    D7103 Standard Guide for Assessment of Medical Gloves

    D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

    D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

    D7107 Standard Test Method for Creep Measurement of Self-Lubricating Bushings

    D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

    D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

    D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

    D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

    D7113/D7113M Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

    D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

    D7120/D7120M Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application

    D7121 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

    D7122 Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)

    D7123 Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl2H, Ar, and CF4)

    D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts

    D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

    D7126 Standard Test Method for On-Line Colorimetric Measurement of Silica

    D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7129 Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator

    D7131 Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator

    D7132 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

    D7133 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

    D7134 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

    D7136/D7136M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

    D7137/D7137M Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

    D7138 Standard Test Method to Determine Melting Temperature of Synthetic Fibers

    D7139 Standard Terminology for Cotton Fibers

    D7140/D7140M Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials

    D7142 Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners

    D7143 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

    D7144 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

    D7145 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    D7148 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

    D7149 Standard Practice for Determining the Freeze Thaw Stability of Adhesives

    D7150 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress

    D7151 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7152 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

    D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

    D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

    D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

    D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

    D7160 Standard Practice for Determination of Expiration Dating for Medical Gloves

    D7161 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

    D7163 Standard Test Method for Specular Gloss of Printed Matter

    D7164 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography

    D7165 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

    D7166 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

    D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

    D7168 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk

    D7169 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

    D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7172 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared

    D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications

    D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes

    D7178 Standard Practice for Determining the Number of Constrictions m of Non-Woven Geotextiles as a Complementary Filtration Property

    D7179 Standard Test Method for Determining Geonet Breaking Force

    D7180/D7180M Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

    D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair

    D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

    D7188 Standard Terminology for Printing Inks, Materials, and Processes

    D7189 Standard Test Method for Relative Mileage of News Ink on Newsprint

    D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

    D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

    D7192 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

    D7193 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D7194 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

    D7195 Standard Guide for Protocol for Setting Color Specifications for a Material

    D7196 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

    D7197 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)

    D7198 Standard Specification for Disposable Embalming Gloves for Single-Use Applications

    D7199 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

    D7200 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

    D7201 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

    D7202 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

    D7203 Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor

    D7204 Standard Practice for Sampling Waste Streams on Conveyors

    D7205/D7205M Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

    D7206/D7206M Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals

    D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D7209 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products

    D7210 Standard Practice for Extraction of Additives in Polyolefin Plastics

    D7211 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography

    D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

    D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

    D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

    D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7219 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

    D7225 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors

    D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7227/D7227M Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

    D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    D7229 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

    D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates

    D7232 Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight

    D7233 Standard Test Method for Testing Fracture of Level Paintbrush Filaments

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7235 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

    D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

    D7237 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

    D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

    D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)

    D7241 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering

    D7242/D7242M Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers

    D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7244 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

    D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

    D7246 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves

    D7247 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

    D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

    D7249/D7249M Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

    D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

    D7251 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

    D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

    D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

    D7254 Standard Specification for Polypropylene (PP) Siding

    D7255 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)

    D7257 Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D7258 Standard Specification for Polymeric Piles

    D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

    D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7264/D7264M Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

    D7265 Standard Specification for Hydrogen Thermophysical Property Tables

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7267 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering

    D7268 Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear

    D7269/D7269M Standard Test Methods for Tensile Testing of Aramid Yarns

    D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

    D7271 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer

    D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods

    D7273/D7273M Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

    D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)

    D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)

    D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

    D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7278 Standard Guide for Prediction of Analyzer Sample System Lag Times

    D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes

    D7282 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements

    D7283 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting

    D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

    D7285 Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems

    D7290 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

    D7291/D7291M Standard Test Method for Through-Thickness Flatwise Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

    D7292 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

    D7293 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

    D7294 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest

    D7295 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources

    D7296 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

    D7297 Standard Practice for Evaluating Residential Indoor Air Quality Concerns

    D7298 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation

    D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

    D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

    D7301 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

    D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7304 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

    D7305 Standard Test Method for Reflection Density of Printed Matter

    D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

    D7307 Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

    D7308 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

    D7309 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    D7310 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors

    D7312 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

    D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7314 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling

    D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

    D7316 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions

    D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

    D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

    D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

    D7323 Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)

    D7324 Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2

    D7325 Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2

    D7326 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)

    D7327 Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)

    D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

    D7329 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

    D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales

    D7331 Standard Practice for Sewn Products Marker Data Interchange

    D7332/D7332M Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

    D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

    D7336/D7336M Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

    D7337/D7337M Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars

    D7338 Standard Guide for Assessment Of Fungal Growth in Buildings

    D7339 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography

    D7340 Standard Practice for Thermal Conductivity of Leather

    D7341 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

    D7342 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)

    D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method

    D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

    D7347 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

    D7348 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

    D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners

    D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

    D7353 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump

    D7354 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings

    D7355 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings

    D7356/D7356M Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

    D7357 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete

    D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

    D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

    D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

    D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7362 Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition

    D7363 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode

    D7365 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide

    D7366 Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods

    D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

    D7369 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

    D7370 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7373 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

    D7374 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

    D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration

    D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

    D7377 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

    D7378 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

    D7379 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7381 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7385 Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion

    D7386 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

    D7387 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)

    D7388 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

    D7389 Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes

    D7390 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

    D7391 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy

    D7392 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants

    D7393 Standard Practice for Indicating Oil in Abrasives

    D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers

    D7395 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

    D7398 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography

    D7399 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)

    D7400 Standard Test Methods for Downhole Seismic Testing

    D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7402 Standard Practice for Identifying Cationic Emulsified Asphalts

    D7403 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

    D7404 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

    D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

    D7407 Standard Guide for Determining The Transmission of Gases Through Geomembranes

    D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

    D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns

    D7410 Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing

    D7412 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7415 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

    D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

    D7418 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

    D7419 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

    D7420 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    D7427 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex

    D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7430 Standard Practice for Mechanical Sampling of Coal

    D7433 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels

    D7434 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads

    D7435 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers

    D7436 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

    D7437 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants

    D7438 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

    D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

    D7440 Standard Practice for Characterizing Uncertainty in Air Quality Measurements

    D7441 Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples

    D7442 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy

    D7444 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

    D7445 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    D7446 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

    D7447 Standard Practice for Symbolizing Adhesive Applications

    D7448 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke

    D7449/D7449M Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line

    D7450 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

    D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

    D7452 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

    D7453 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7459 Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources

    D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

    D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

    D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

    D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7468 Standard Test Method for Cummins ISM Test

    D7469 Standard Test Methods for End-Joints in Structural Wood Products

    D7470 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs

    D7471 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

    D7472 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

    D7473 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations

    D7474 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

    D7475 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions

    D7476 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins

    D7477 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water

    D7478/D7478M Standard Specification for Heavy Duty Sheathed Wood Crates

    D7480 Standard Guide for Evaluating the Attributes of a Forest Management Plan

    D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

    D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7485 Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7486 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

    D7487 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

    D7488 Standard Test Method for Open Time of Latex Paints

    D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

    D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

    D7491 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants

    D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems

    D7493 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

    D7495 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

    D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7497 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

    D7498/D7498M Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test

    D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness

    D7500 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7505/D7505M Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7506/D7506M Standard Test Method for Pocket Reinforcement

    D7507 Standard Specification for Woven High Stretch Fabrics Used in Apparel

    D7508/D7508M Standard Specification for Polyolefin Chopped Strands for Use in Concrete

    D7509 Standard Specification for Fluorocarbon Feedstock Grade Chloroform

    D7510 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water

    D7511 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

    D7512 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation

    D7513 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges

    D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

    D7515 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

    D7517 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines

    D7518 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

    D7519 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting

    D7520 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere

    D7521 Standard Test Method for Determination of Asbestos in Soil

    D7522/D7522M Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate

    D7524 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

    D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

    D7527 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

    D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

    D7530/D7530M Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7532 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives

    D7535 Standard Test Method for Lead-210 in Water

    D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    D7540 Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller

    D7541 Standard Practice for Estimating Critical Surface Tensions

    D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

    D7544 Standard Specification for Pyrolysis Liquid Biofuel

    D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

    D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7548 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    D7550 Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography

    D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

    D7552 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

    D7557/D7557M Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

    D7558 Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves

    D7559/D7559M Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions

    D7563 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

    D7564/D7564M Standard Practice for Construction of Asphalt-Rubber Cape Seal

    D7565/D7565M Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    D7567 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction

    D7568 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

    D7569 Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method

    D7570 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering

    D7571 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame

    D7572 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil

    D7573 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection

    D7574 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7575 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

    D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography

    D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

    D7580/D7580M Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads

    D7582 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    D7584 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber

    D7585/D7585M Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    D7586/D7586M Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies

    D7588 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

    D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

    D7590 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

    D7591 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7593 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

    D7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

    D7597 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro

    D7598 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry

    D7599 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Sp

    D7600 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry

    D7601 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation

    D7602 Standard Practice for Installation of Vulcanized Rubber Linings

    D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

    D7605 Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

    D7606 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

    D7607/D7607M Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)

    D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

    D7611/D7611M Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

    D7612 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources

    D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes

    D7614 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements

    D7615/D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

    D7616/D7616M Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

    D7617/D7617M Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

    D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7624 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

    D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7633 Standard Test Method for Carbon Black—Carbon Content

    D7634 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy

    D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

    D7636/D7636M Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

    D7637 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)

    D7638 Standard Test Method for Determination of Fatty Acids and Esters in Glycerin

    D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

    D7640 Standard Specification for Engine Coolant Grade Glycerin

    D7641 Standard Guide for Textile Fibers

    D7642 Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments

    D7643 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7644 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7645 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7646 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

    D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

    D7648 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment

    D7649 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis

    D7650 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter

    D7651 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel

    D7652 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection

    D7653 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy

    D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer

    D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

    D7659 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

    D7660 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

    D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

    D7662 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

    D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7665 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

    D7666 Standard Specification for Triglyceride Burner Fuel

    D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

    D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

    D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis

    D7670 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

    D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

    D7672 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies

    D7673/D7673M Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

    D7674 Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White

    D7675 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer

    D7677 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

    D7678 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

    D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils

    D7680 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

    D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

    D7684 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

    D7685 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

    D7686 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7688 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

    D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

    D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7699/D7699M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

    D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams

    D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag

    D7702/D7702M Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics

    D7703 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System

    D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

    D7705/D7705M Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

    D7706 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

    D7707 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

    D7708 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

    D7709 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters

    D7710 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials

    D7711 Standard Guide for Description of Polymer Pellet Defects

    D7712 Standard Terminology for Sampling and Analysis of Asbestos

    D7713 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)

    D7714 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

    D7715 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines

    D7716 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography

    D7717 Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

    D7718 Standard Practice for Obtaining In-Service Samples of Lubricating Grease

    D7719 Standard Specification for High-Octane Unleaded Fuel

    D7720 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    D7721 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

    D7722 Standard Terminology Relating to Industrial Textile Stitches and Seams

    D7723 Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds

    D7724 Standard Test Method for Carbon Black - Non-Dispersible Matter by Mechanical Flushing (NDM)

    D7725 Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)

    D7726 Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water

    D7727 Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant

    D7728 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance

    D7729 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software

    D7730 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7731 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7733 Standard Specification for Acrylic Dispersion Ground

    D7734/D7734M Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method

    D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    D7736 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

    D7737 Standard Test Method for Individual Geogrid Junction Strength

    D7739 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

    D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7741/D7741M Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

    D7742 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ n ≤ 12 in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spe

    D7743 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders

    D7744/D7744M Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

    D7745 Standard Practice for Testing Pultruded Composites

    D7746 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests

    D7747/D7747M Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

    D7748/D7748M Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products

    D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

    D7750 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7752 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

    D7753 Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

    D7754 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

    D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

    D7759/D7759M Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

    D7760 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter

    D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

    D7764 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

    D7765 Standard Practice for Use of Foundry Sand in Structural Fill and Embankments

    D7766/D7766M Standard Practice for Damage Resistance Testing of Sandwich Constructions

    D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

    D7768 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

    D7770 Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method

    D7771 Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

    D7772 Standard Test Method for Carbon Black Extractables - Absorbance of Cyclohexane Extract

    D7773 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography

    D7774 Standard Test Method for Flexural Fatigue Properties of Plastics

    D7775 Standard Guide for Measurements on Small Graphite Specimens

    D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories

    D7777 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

    D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features

    D7781 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase

    D7782 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

    D7783 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data

    D7784 Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry

    D7785 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration

    D7786 Standard Test Method for Determining Enamel Holdout

    D7787/D7787M Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings

    D7789 Standard Practice for Collection of Fungal Material from Surfaces by Swab

    D7790 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing

    D7791 Standard Test Method for Uniaxial Fatigue Properties of Plastics

    D7793 Standard Specification for Insulated Vinyl Siding

    D7794 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7798 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC)

    D7799 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings

    D7801 Standard Terminology for Paint Brush Application Tools

    D7802 Standard Terminology for Paint Roller Application Tools

    D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7804 Standard Test Method for Fiber Shedding of Paint Roller Covers

    D7805 Standard Terminology for Printing Ink Vehicles and Related Materials

    D7806 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy

    D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

    D7808 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

    D7811 Standard Test Method for Bow and Skew Using a Measuring Tool

    D7815 Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

    D7816 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins

    D7817 Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins

    D7818 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins

    D7819 Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins

    D7820 Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel

    D7821 Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)

    D7822 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

    D7823 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Chromatography

    D7825 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer

    D7826 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

    D7828 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

    D7829 Standard Guide for Sediment and Water Determination in Crude Oil

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

    D7831 Standard Practice for Sampling of Tanks by Field Personnel

    D7832/D7832M Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)

    D7833 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography

    D7834 Standard Test Method for Filling Material Shedding of Paint Brushes

    D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine

    D7836 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

    D7840 Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware

    D7841 Standard Practice for Sustainable Laundry Best Management Practices

    D7842/D7842M Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons

    D7843 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

    D7844 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

    D7845 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry

    D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    D7849 Standard Classification for Nomenclature of Reference Materials of Committee D24

    D7850 Standard Specification for Biological Properties of Industry Reference Materials (IRM)

    D7852 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys

    D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete

    D7854 Standard Test Method for Carbon Black-Void Volume at Mean Pressure

    D7855/D7855M Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

    D7856 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

    D7858 Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry

    D7859 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    D7863 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

    D7865 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels

    D7866 Standard Specification for Radiation Attenuating Protective Gloves

    D7867 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

    D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings

    D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

    D7870/D7870M Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7872 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

    D7873 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)

    D7874 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

    D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    D7877 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes

    D7878/D7878M Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P

    D7879 Standard Test Method for Determining Flax Fiber Widths Using Image Analysis

    D7880/D7880M Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    D7886 Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks

    D7887 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests

    D7888 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings

    D7889 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

    D7893 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

    D7896 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method

    D7898 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

    D7899 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

    D7900 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

    D7901 Standard Specification for Dimethyl Ether for Fuel Purposes

    D7903 Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges

    D7906 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

    D7907 Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves

    D7909 Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes

    D7910 Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift

    D7911 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test

    D7912 Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)

    D7915 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set

    D7919 Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

    D7934/D7934M Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions

    D7935/D7935M Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware

    D7940 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy

    D7941/D7941M Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer

    D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    D7953 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method

    D7954/D7954M Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners

    D7956/D7956M Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Fixture Specimen

    E1 Standard Specification for ASTM Liquid-in-Glass Thermometers

    E3 Standard Guide for Preparation of Metallographic Specimens

    E4 Standard Practices for Force Verification of Testing Machines

    E6 Standard Terminology Relating to Methods of Mechanical Testing

    E7 Standard Terminology Relating to Metallography

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E11 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

    E28 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

    E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E32 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

    E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E41 Terminology Relating to Conditioning

    E45 Standard Test Methods for Determining the Inclusion Content of Steel

    E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

    E69 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

    E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

    E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

    E73 Standard Practice for Static Load Testing of Truss Assemblies

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E77 Standard Test Method for Inspection and Verification of Thermometers

    E81 Standard Test Method for Preparing Quantitative Pole Figures

    E82/E82M Standard Test Method for Determining the Orientation of a Metal Crystal

    E83 Standard Practice for Verification and Classification of Extensometer Systems

    E84 Standard Test Method for Surface Burning Characteristics of Building Materials

    E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

    E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    E94 Standard Guide for Radiographic Examination

    E95 Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation

    E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

    E100 Standard Specification for ASTM Hydrometers

    E102/E102M Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

    E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

    E104 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

    E105 Standard Practice for Probability Sampling Of Materials

    E108 Standard Test Methods for Fire Tests of Roof Coverings

    E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E112 Standard Test Methods for Determining Average Grain Size

    E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E119 Standard Test Methods for Fire Tests of Building Construction and Materials

    E122 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E123 Standard Specification for Apparatus for Determination of Water by Distillation

    E124 Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis

    E125 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

    E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

    E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

    E128 Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

    E131 Standard Terminology Relating to Molecular Spectroscopy

    E132 Standard Test Method for Poisson's Ratio at Room Temperature

    E133 Standard Specification for Distillation Equipment

    E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

    E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

    E143 Standard Test Method for Shear Modulus at Room Temperature

    E144 Standard Practice for Safe Use of Oxygen Combustion Bombs

    E145 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens

    E147 Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method

    E154/E154M Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E161 Standard Specification for Precision Electroformed Sieves

    E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E168 Standard Practices for General Techniques of Infrared Quantitative Analysis

    E169 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

    E170 Standard Terminology Relating to Radiation Measurements and Dosimetry

    E171/E171M Standard Practice for Conditioning and Testing Flexible Barrier Packaging

    E175 Standard Terminology of Microscopy

    E176 Standard Terminology of Fire Standards

    E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E178 Standard Practice for Dealing With Outlying Observations

    E179 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials

    E181 Standard Test Methods for Detector Calibration and Analysis of Radionuclides

    E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E190 Standard Test Method for Guided Bend Test for Ductility of Welds

    E191 Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds

    E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

    E193 Standard Specification for Laboratory Glass Micropipets

    E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

    E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

    E200 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

    E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

    E203 Standard Test Method for Water Using Volumetric Karl Fischer Titration

    E205 Standard Specification for Glass and Oxygen Combustion Flask

    E207 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

    E208 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

    E209 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

    E210 Standard Specification for Microscope Objective Thread

    E211 Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy

    E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube

    E220 Standard Test Method for Calibration of Thermocouples By Comparison Techniques

    E222 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation

    E223 Standard Test Methods for Analysis of Sulfuric Acid

    E224 Standard Test Methods for Analysis of Hydrochloric Acid

    E228 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

    E230/E230M Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

    E235/E235M Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications

    E236 Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

    E237 Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)

    E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

    E243 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

    E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

    E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement

    E253 Standard Terminology Relating to Sensory Evaluation of Materials and Products

    E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

    E256 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition

    E258 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method

    E259 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries

    E260 Standard Practice for Packed Column Gas Chromatography

    E261 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

    E262 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques

    E263 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron

    E264 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel

    E265 Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32

    E266 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum

    E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

    E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E275 Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

    E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

    E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E284 Standard Terminology of Appearance

    E285 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

    E287 Standard Specification for Laboratory Glass Graduated Burets

    E288 Standard Specification for Laboratory Glass Volumetric Flasks

    E289 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry

    E290 Standard Test Methods for Bend Testing of Material for Ductility

    E291 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E295 Standard Test Method for Measured Speed of Oil Diffusion Pumps

    E296 Standard Practice for Ionization Gage Application to Space Simulators

    E298 Standard Test Methods for Assay of Organic Peroxides

    E299 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

    E300 Standard Practice for Sampling Industrial Chemicals

    E303 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

    E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

    E307 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E310 Standard Reference Radiographs for Tin Bronze Castings

    E312 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)

    E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

    E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

    E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

    E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E319 Standard Practice for the Evaluation of Single-Pan Mechanical Balances

    E321 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)

    E322 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E323 Standard Specification for Perforated-Plate Sieves for Testing Purposes

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E330/E330M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E334 Standard Practice for General Techniques of Infrared Microanalysis

    E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

    E337 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)

    E340 Standard Test Method for Macroetching Metals and Alloys

    E341 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance

    E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

    E344 Terminology Relating to Thermometry and Hydrometry

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E346 Standard Test Methods for Analysis of Methanol

    E349 Standard Terminology Relating to Space Simulation

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E355 Standard Practice for Gas Chromatography Terms and Relationships

    E359 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

    E377 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials

    E381 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

    E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E385 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique

    E386 Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy

    E387 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E388 Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E390 Standard Reference Radiographs for Steel Fusion Welds

    E393 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters

    E394 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E398 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E405 Standard Test Methods for Wear Testing Rotary Operators for Windows

    E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

    E407 Standard Practice for Microetching Metals and Alloys

    E408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

    E410 Standard Test Method for Moisture and Residue in Liquid Chlorine

    E411 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

    E413 Classification for Rating Sound Insulation

    E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

    E422 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

    E423 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

    E424 Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials

    E426 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

    E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

    E432 Standard Guide for Selection of a Leak Testing Method

    E433 Standard Reference Photographs for Liquid Penetrant Inspection

    E434 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation

    E436 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

    E438 Standard Specification for Glasses in Laboratory Apparatus

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E444 Standard Guide for Scope of Work of Forensic Document Examiners

    E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    E448 Standard Practice for Scleroscope Hardness Testing of Metallic Materials

    E449 Standard Test Methods for Analysis of Calcium Chloride

    E452 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer

    E454 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)

    E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

    E456 Standard Terminology Relating to Quality and Statistics

    E457 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

    E458 Standard Test Method for Heat of Ablation

    E459 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter

    E460 Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage

    E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

    E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

    E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

    E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

    E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

    E471 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

    E473 Standard Terminology Relating to Thermal Analysis and Rheology

    E475 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography

    E477 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E481 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver

    E482 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)

    E487 Standard Test Method for Constant-Temperature Stability of Chemical Materials

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E490 Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables

    E491 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft

    E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

    E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

    E494 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E496 Standard Test Method for Measuring Neutron Fluence and Average Energy from?3H(d,n) 4He Neutron Generators by Radioactivation Techniques

    E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

    E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

    E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

    E502 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

    E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

    E506 Standard Test Method for Mercury in Liquid Chlorine

    E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

    E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

    E509/E509M Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels

    E511 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer

    E512 Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation

    E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry

    E515 Standard Practice for Leaks Using Bubble Emission Techniques

    E516 Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

    E521 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation

    E523 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper

    E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

    E526 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

    E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

    E531 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials

    E534 Standard Test Methods for Chemical Analysis of Sodium Chloride

    E535 Standard Practice for Preparation of Fire-Test-Response Standards

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E537 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

    E538 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)

    E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

    E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

    E542 Standard Practice for Calibration of Laboratory Volumetric Apparatus

    E543 Standard Specification for Agencies Performing Nondestructive Testing

    E544 Standard Practices for Referencing Suprathreshold Odor Intensity

    E545 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

    E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

    E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E549 Standard Guide for Preparing Field Sprayer Calibration Procedures

    E550 Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures

    E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E557 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

    E561 Standard Test Method for K-R Curve Determination

    E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

    E563 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

    E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

    E566 Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals

    E569/E569M Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E570 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

    E571 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E573 Standard Practices for Internal Reflection Spectroscopy

    E574 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

    E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

    E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

    E578 Standard Test Method for Linearity of Fluorescence Measuring Systems

    E579 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

    E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E582 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

    E585/E585M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

    E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E588 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

    E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

    E594 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

    E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

    E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

    E598 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

    E601 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

    E603 Standard Guide for Room Fire Experiments

    E604 Standard Test Method for Dynamic Tear Testing of Metallic Materials

    E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E608/E608M Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

    E609 Standard Terminology Relating to Pesticides

    E611 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography

    E617 Standard Specification for Laboratory Weights and Precision Mass Standards

    E618 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

    E619 Standard Practice for Evaluating Foreign Odors in Paper Packaging

    E620 Standard Practice for Reporting Opinions of Scientific or Technical Experts

    E631 Standard Terminology of Building Constructions

    E633 Standard G