ASTM Standards Source (Online):
    Rubber Collection


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A36/A36M Standard Specification for Carbon Structural Steel

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A502 Standard Specification for Rivets, Steel, Structural

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A709/A709M Standard Specification for Structural Steel for Bridges

    A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A1082/A1082M Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

    B6 Standard Specification for Zinc

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

    B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C33/C33M Standard Specification for Concrete Aggregates

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C150/C150M Standard Specification for Portland Cement

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C514 Standard Specification for Nails for the Application of Gypsum Board

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603 Standard Test Method for Measurement of Solids in Water

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    D75/D75M Standard Practice for Sampling Aggregates

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D378 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

    D380 Standard Test Methods for Rubber Hose

    D395 Standard Test Methods for Rubber Property—Compression Set

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D430 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

    D454 Standard Test Method for Rubber Deterioration by Heat and Air Pressure

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D531 Standard Test Method for Rubber Property-Pusey and Jones Indentation

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D575 Standard Test Methods for Rubber Properties in Compression

    D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

    D623 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D751 Standard Test Methods for Coated Fabrics

    D813 Standard Test Method for Rubber Deterioration-Crack Growth

    D814 Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids

    D816 Standard Test Methods for Rubber Cements

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D925 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)

    D926 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)

    D945 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

    D991 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products

    D1052 Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus

    D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

    D1076 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

    D1141 Standard Practice for the Preparation of Substitute Ocean Water

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1193 Standard Specification for Reagent Water

    D1229 Standard Test Method for Rubber Property-Compression Set at Low Temperatures

    D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils

    D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

    D1280 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

    D1329 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

    D1330 Standard Specification for Rubber Sheet Gaskets

    D1349 Standard Practice for Rubber-Standard Temperatures for Testing

    D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

    D1414 Standard Test Methods for Rubber O-Rings

    D1415 Standard Test Method for Rubber Property—International Hardness

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature

    D1456 Standard Test Method for Rubber Property—Elongation at Specific Stress

    D1460 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion

    D1485 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

    D1506 Standard Test Methods for Carbon Black—Ash Content

    D1508 Standard Test Method for Carbon Black, Pelleted Fines and Attrition

    D1509 Standard Test Methods for Carbon Black—Heating Loss

    D1510 Standard Test Method for Carbon Black—Iodine Adsorption Number

    D1511 Standard Test Method for Carbon Black—Pellet Size Distribution

    D1512 Standard Test Methods for Carbon Black—pH Value

    D1513 Standard Test Method for Carbon Black, Pelleted—Pour Density

    D1514 Standard Test Method for Carbon Black - Sieve Residue

    D1519 Standard Test Method for Rubber Chemicals-Melting Range

    D1566 Standard Terminology Relating to Rubber

    D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

    D1618 Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract

    D1619 Standard Test Methods for Carbon Black—Sulfur Content

    D1630 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

    D1646 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1765 Standard Classification System for Carbon Blacks Used in Rubber Products

    D1766 Standard Test Method for Rubber Chemicals - Solubility

    D1799 Standard Practice for Carbon Black—Sampling Packaged Shipments

    D1817 Standard Test Method for Rubber Chemicals—Density

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D1900 Standard Practice for Carbon Black - Sampling Bulk Shipments

    D1917 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

    D1937 Standard Test Method for Carbon Black, Pelleted—Mass Strength

    D1991 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

    D1992 Standard Guide for Testing Synthetic Plasticizers Used in Rubber

    D1993 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2059/D2059M Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

    D2084 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2226 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

    D2227 Standard Specification for Natural Rubber (NR) Technical Grades

    D2228 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method

    D2230 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)

    D2449 Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

    D2527 Standard Specification for Rubber Seals—Splice Strength

    D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2663 Standard Test Methods for Carbon Black—Dispersion in Rubber

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

    D2702 Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

    D2758 Standard Test Method for Engine Coolants by Engine Dynamometer

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

    D2847 Standard Practice for Testing Engine Coolants in Car and Light Truck Service

    D3053 Standard Terminology Relating to Carbon Black

    D3137 Standard Test Method for Rubber Property—Hydrolytic Stability

    D3156 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

    D3157 Standard Test Method for Rubber from Natural Sources—Color

    D3182 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3184 Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

    D3185 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

    D3186 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

    D3187 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

    D3188 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

    D3189 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

    D3190 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)

    D3191 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

    D3192 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

    D3194 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)

    D3265 Standard Test Method for Carbon Black—Tint Strength

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3313 Standard Test Method for Carbon Black—Individual Pellet Hardness

    D3314 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

    D3316 Standard Test Method for Stability of Perchloroethylene with Copper

    D3346 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D3393 Standard Specification for Coated Fabrics-Waterproofness

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3452 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

    D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

    D3493 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)

    D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

    D3568 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

    D3577 Standard Specification for Rubber Surgical Gloves

    D3578 Standard Specification for Rubber Examination Gloves

    D3579 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3616 Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3677 Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry

    D3738 Standard Specification for Rubber-Coated Cloth Hospital Sheeting

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3772 Standard Specification for Natural Rubber Finger Cots

    D3832 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

    D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

    D3848 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

    D3849 Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy

    D3853 Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding

    D3854 Standard Test Method for Rubber Thread-Resistance to Dry Heat

    D3855 Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment

    D3896 Standard Practice for Rubber From Synthetic Sources—Sampling

    D3900 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

    D3902 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D3958 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

    D4004 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis

    D4005 Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings

    D4026 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

    D4122 Standard Practice for Carbon Black-Evaluation of an Industry Reference Black

    D4295 Standard Classification for Rubber Compounding Materials—Zinc Oxide

    D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide

    D4316 Standard Specification for Elastomeric Water Bottles

    D4340 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4482 Test Method for Rubber Property - Extension Cycling Fatigue

    D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    D4527 Standard Test Method for Carbon Black - Solvent Extractables

    D4528 Standard Classification for Rubber Compounding Materials—Sulfur

    D4569 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

    D4570 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

    D4571 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

    D4572 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

    D4573 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

    D4574 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content

    D4575 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

    D4578 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

    D4583 Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data

    D4620 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4676 Standard Classification for Rubber Compounding Materials—Antidegradants

    D4677 Standard Classification for Rubber Compounding Materials—Titanium Dioxide

    D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

    D4679 Standard Specification for Rubber General Purpose, Household or Beautician Gloves

    D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

    D4817 Standard Classification for Rubber Compounding Materials—Stearic Acid

    D4818 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

    D4821 Standard Guide for Carbon Black - Validation of Test Method Precision and Bias

    D4924 Standard Classification for Petroleum Waxes for Use in Rubber Compounding

    D4934 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

    D4936 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

    D4937 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

    D5044 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

    D5051 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

    D5054 Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

    D5099 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

    D5151 Standard Test Method for Detection of Holes in Medical Gloves

    D5193/D5193M Standard Test Method for Coated Fabrics—Air Retention

    D5230 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

    D5250 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

    D5289 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters

    D5297 Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography

    D5376 Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

    D5377 Standard Classification for Rubber Compounding Materials—Ground Coal

    D5406 Standard Practice for Rubber - Calculation of Producer's Process Performance Indexes

    D5460 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

    D5461 Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

    D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

    D5538 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5604 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption

    D5605 Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5666 Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

    D5667 Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

    D5668 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter

    D5670 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

    D5712 Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

    D5774 Standard Test Methods for Rubber-Chemical Analysis of Extractables

    D5775 Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

    D5805 Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches

    D5817 Standard Practice for Carbon Black, Pelleted - Reduction, Blending, and Drying of Gross Samples for Testing

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D5899 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

    D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

    D5902 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

    D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

    D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

    D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?°C

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5992 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

    D6047 Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

    D6048 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

    D6049 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

    D6085 Standard Practice for Sampling in Rubber Testing - Terminology and Basic Concepts

    D6086 Standard Test Method for Carbon Black—Void Volume (VV)

    D6124 Standard Test Method for Residual Powder on Medical Gloves

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

    D6204 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

    D6208 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

    D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6319 Standard Specification for Nitrile Examination Gloves for Medical Application

    D6324 Standard Test Methods for Male Condoms Made from Polyurethane

    D6355 Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

    D6370 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)

    D6499 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

    D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

    D6556 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135? °C

    D6600 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

    D6601 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

    D6602 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6738 Standard Test Method for Precipitated Silica - Volatile Content

    D6739 Standard Test Method for Silica - pH Value

    D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

    D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

    D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

    D6814 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

    D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

    D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

    D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

    D6854 Standard Test Method for Silica-Oil Absorption Number

    D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

    D6915 Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks

    D6976 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms

    D6977 Standard Specification for Polychloroprene Examination Gloves for Medical Application

    D6978 Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7050 Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7102 Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

    D7103 Standard Guide for Assessment of Medical Gloves

    D7121 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

    D7160 Standard Practice for Determination of Expiration Dating for Medical Gloves

    D7161 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

    D7198 Standard Specification for Disposable Embalming Gloves for Single-Use Applications

    D7246 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves

    D7329 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

    D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    D7427 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex

    D7558 Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves

    D7605 Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

    D7633 Standard Test Method for Carbon Black—Carbon Content

    D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

    D7662 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

    D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils

    D7723 Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds

    D7724 Standard Test Method for Carbon Black - Non-Dispersible Matter by Mechanical Flushing (NDM)

    D7771 Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

    D7772 Standard Test Method for Carbon Black Extractables - Absorbance of Cyclohexane Extract

    D7850 Standard Specification for Biological Properties of Industry Reference Materials (IRM)

    D7854 Standard Test Method for Carbon Black-Void Volume at Mean Pressure

    E3 Standard Guide for Preparation of Metallographic Specimens

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E112 Standard Test Methods for Determining Average Grain Size

    E122 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E340 Standard Test Method for Macroetching Metals and Alloys

    E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

    E381 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E456 Standard Terminology Relating to Quality and Statistics

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E566 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

    E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    E709 Standard Guide for Magnetic Particle Testing

    E712 Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems

    E745 Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems

    E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E1823 Standard Terminology Relating to Fatigue and Fracture Testing

    F36 Standard Test Method for Compressibility and Recovery of Gasket Materials

    F37 Standard Test Methods for Sealability of Gasket Materials

    F38 Standard Test Methods for Creep Relaxation of a Gasket Material

    F104 Standard Classification System for Nonmetallic Gasket Materials

    F112 Standard Test Method for Sealability of Enveloped Gaskets

    F118 Standard Definitions of Terms Relating to Gaskets

    F145 Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies

    F146 Standard Test Methods for Fluid Resistance of Gasket Materials

    F147 Standard Test Method for Flexibility of Non-Metallic Gasket Materials

    F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials

    F152 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

    F326 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

    F336 Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

    F363 Standard Test Method for Corrosion Testing of Gaskets

    F377 Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

    F408 Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

    F414 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger

    F421 Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires

    F432 Standard Specification for Roof and Rock Bolts and Accessories

    F433 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials

    F434 Standard Test Method for Blow-Out Testing of Preformed Gaskets

    F436 Standard Specification for Hardened Steel Washers

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F457 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation

    F467M Standard Specification for Nonferrous Nuts for General Use (Metric)

    F467 Standard Specification for Nonferrous Nuts for General Use

    F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

    F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

    F485 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

    F495 Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F538 Standard Terminology Relating to the Characteristics and Performance of Tires

    F541 Standard Specification for Alloy Steel Eyebolts

    F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F551/F551M Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires

    F559 Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

    F592 Standard Terminology of Collated and Cohered Fasteners and Their Application Tools

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

    F607 Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces

    F680 Standard Test Methods for Nails

    F724 Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

    F746 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

    F747 Standard Terminology Relating to Amusement Rides and Devices

    F762/F762M Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires

    F770 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

    F788 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

    F806 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

    F811 Standard Practice for Accelerometer Use in Vehicles for Tire Testing

    F812 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837 Standard Specification for Stainless Steel Socket Head Cap Screws

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F853 Standard Practice for Maintenance Procedures for Amusement Rides and Devices

    F868 Standard Classification for Laminated Composite Gasket Materials

    F870 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

    F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F880 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F897 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

    F901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts

    F912 Standard Specification for Alloy Steel Socket Set Screws

    F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)

    F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

    F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

    F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F1016 Standard Practice for Linear Tire Treadwear Data Analysis

    F1035 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System

    F1046 Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

    F1087 Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

    F1089 Standard Test Method for Corrosion of Surgical Instruments

    F1110 Standard Test Method for Sandwich Corrosion Test

    F1111 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

    F1112 Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

    F1113 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1159 Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

    F1276 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials

    F1277 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique

    F1315 Standard Test Method for Density of a Sheet Gasket Material

    F1364 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

    F1426 Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

    F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)

    F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

    F1470 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

    F1502 Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

    F1503 Standard Practice for Machine/Process Capability Study Procedure

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1572 Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces

    F1574 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures

    F1575 Standard Test Method for Determining Bending Yield Moment of Nails

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F1649 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

    F1650 Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

    F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1789 Standard Terminology for F16 Mechanical Fasteners

    F1801 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

    F1805 Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

    F1806 Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F1875 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface

    F1909 Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets

    F1922 Standard Test Method for Tires, Pneumatic, Vehicular, Highway

    F1923 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness

    F1971 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench

    F2007 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities

    F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

    F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

    F2137 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

    F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2291 Standard Practice for Design of Amusement Rides and Devices

    F2325 Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications

    F2328 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs

    F2328M Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs (Metric)

    F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2374 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices

    F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions

    F2376 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

    F2378 Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials

    F2437 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

    F2460 Standard Practice for Special Requirements for Bumper Boats

    F2461 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment

    F2466 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

    F2467 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications

    F2468 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications

    F2482 Standard Specification for Load-Indicating Externally Threaded Fasteners

    F2493 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

    F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers

    F2524 Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications

    F2663 Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR of 4536 kg (10 000 lb) or Less

    F2688 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

    F2716 Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam

    F2779 Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface

    F2803 Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels

    F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F2833 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F2837 Standard Test Method for Hot Compression Properties of Gasket Materials

    F2838 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation

    F2869 Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface

    F2870 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

    F2871 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

    F2872 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire

    F3015 Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E

    G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

    G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

    300+ ASTM standards on rubber, carbon black, gaskets, and tires. Available as one-time collection, collection with quarterly updates, or LAN version with quarterly updates.