ASTM Standards Source (Online):
    Petroleum Collection


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    C515 Standard Specification for Chemical-Resistant Ceramic Tower Packings

    C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

    C560 Standard Test Methods for Chemical Analysis of Graphite

    C561 Standard Test Method for Ash in a Graphite Sample

    C562 Standard Test Method for Moisture in a Graphite Sample

    C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

    C611 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

    C625 Standard Practice for Reporting Irradiation Results on Graphite

    C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

    C662 Standard Specification for Impervious Graphite Pipe and Threading

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C709 Standard Terminology Relating to Manufactured Carbon and Graphite

    C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

    C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

    C748 Standard Test Method for Rockwell Hardness of Graphite Materials

    C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

    C769 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young's Modulus

    C781 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

    C783 Standard Practice for Core Sampling of Graphite Electrodes

    C808 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

    C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

    C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

    C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

    C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

    C1039 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

    C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

    C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

    D91 Standard Test Method for Precipitation Number of Lubricating Oils

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D94 Standard Test Methods for Saponification Number of Petroleum Products

    D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

    D97 Standard Test Method for Pour Point of Petroleum Products

    D127 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

    D128 Standard Test Methods for Analysis of Lubricating Grease

    D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D187 Standard Test Method for Burning Quality of Kerosine

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D217 Standard Test Methods for Cone Penetration of Lubricating Grease

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D341 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D396 Standard Specification for Fuel Oils

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D482 Standard Test Method for Ash from Petroleum Products

    D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

    D566 Standard Test Method for Dropping Point of Lubricating Grease

    D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

    D612 Standard Test Method for Carbonizable Substances in Paraffin Wax

    D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D721 Standard Test Method for Oil Content of Petroleum Waxes

    D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

    D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893 Standard Test Method for Insolubles in Used Lubricating Oils

    D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

    D910 Standard Specification for Aviation Gasolines

    D937 Standard Test Method for Cone Penetration of Petrolatum

    D938 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

    D942 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

    D943 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

    D972 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration

    D975 Standard Specification for Diesel Fuel Oils

    D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels

    D1015 Standard Test Method for Freezing Points of High-Purity Hydrocarbons

    D1016 Standard Test Method for Purity of Hydrocarbons from Freezing Points

    D1018 Standard Test Method for Hydrogen In Petroleum Fractions

    D1025 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

    D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

    D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D1094 Standard Test Method for Water Reaction of Aviation Fuels

    D1157 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D1159 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

    D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D1217 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

    D1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

    D1250 Standard Guide for Use of the Petroleum Measurement Tables

    D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

    D1265 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D1321 Standard Test Method for Needle Penetration of Petroleum Waxes

    D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

    D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

    D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

    D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1465 Standard Test Method for Blocking and Picking Points of Petroleum Wax

    D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

    D1480 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

    D1481 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1550 Standard ASTM Butadiene Measurement Tables

    D1552 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

    D1655 Standard Specification for Aviation Turbine Fuels

    D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

    D1662 Standard Test Method for Active Sulfur in Cutting Oils

    D1742 Standard Test Method for Oil Separation from Lubricating Grease During Storage

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1744 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent

    D1747 Standard Test Method for Refractive Index of Viscous Materials

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D1831 Standard Test Method for Roll Stability of Lubricating Grease

    D1833 Standard Test Method for Odor of Petroleum Wax

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1837 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

    D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

    D2001 Standard Test Method for Depentanization of Gasoline and Naphthas

    D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

    D2008 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2070 Standard Test Method for Thermal Stability of Hydraulic Oils

    D2155 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

    D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

    D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

    D2158 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

    D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

    D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2163 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

    D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

    D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

    D2268 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

    D2269 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

    D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

    D2273 Standard Test Method for Trace Sediment in Lubricating Oils

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2392 Standard Test Method for Color Of Dyed Aviation Gasolines

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

    D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

    D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System

    D2423 Standard Test Method for Surface Wax on Waxed Paper or Paperboard

    D2425 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

    D2426 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2427 Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography

    D2500 Standard Test Method for Cloud Point of Petroleum Products

    D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

    D2502 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

    D2503 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

    D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

    D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

    D2509 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

    D2510 Standard Test Method for Adhesion of Solid Film Lubricants

    D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

    D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2534 Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

    D2549 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

    D2593 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

    D2596 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

    D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

    D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

    D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

    D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2650 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry

    D2669 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

    D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

    D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

    D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

    D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)

    D2714 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

    D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum

    D2717 Standard Test Method for Thermal Conductivity of Liquids

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D2766 Standard Test Method for Specific Heat of Liquids and Solids

    D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

    D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

    D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D2786 Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

    D2789 Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

    D2878 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

    D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

    D2880 Standard Specification for Gas Turbine Fuel Oils

    D2881 Standard Classification for Metalworking Fluids and Related Materials

    D2883 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

    D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

    D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

    D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

    D2889 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

    D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

    D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

    D2893 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

    D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2962 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

    D2981 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

    D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

    D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3115 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231 Standard Test Method for Phosphorus in Gasoline

    D3233 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

    D3235 Standard Test Method for Solvent Extractables in Petroleum Waxes

    D3236 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

    D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3238 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

    D3239 Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

    D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3336 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

    D3343 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

    D3344 Standard Test Method for Total Wax Content of Corrugated Paperboard

    D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3427 Standard Test Method for Air Release Properties of Petroleum Oils

    D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3521 Standard Test Method for Surface Wax Coating On Corrugated Board

    D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

    D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

    D3525 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

    D3527 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3606 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

    D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D3610 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

    D3663 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

    D3699 Standard Specification for Kerosine

    D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

    D3705 Standard Test Method for Misting Properties of Lubricating Fluids

    D3707 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method

    D3708 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation

    D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

    D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

    D3712 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

    D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

    D3766 Standard Terminology Relating to Catalysts and Catalysis

    D3825 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

    D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D3906 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

    D3907/D3907M Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D3908 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

    D3942 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

    D3943 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

    D3944 Standard Test Method for Solidification Point of Petroleum Wax

    D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D4006 Standard Test Method for Water in Crude Oil by Distillation

    D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4042 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D4051 Standard Practice for Preparation of Low-Pressure Gas Blends

    D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

    D4170 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    D4171 Standard Specification for Fuel System Icing Inhibitors

    D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D4174 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

    D4175 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4178 Standard Practice for Calibrating Moisture Analyzers

    D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

    D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

    D4222 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

    D4284 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

    D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

    D4291 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4293 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4296 Standard Practice for Sampling Pitch

    D4304 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

    D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4307 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

    D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

    D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D4418 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

    D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4423 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

    D4424 Standard Test Method for Butylene Analysis by Gas Chromatography

    D4425 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)

    D4438 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

    D4463/D4463M Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

    D4464 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering

    D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D4486 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

    D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4625 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)

    D4626 Standard Practice for Calculation of Gas Chromatographic Response Factors

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4636 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

    D4641 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms

    D4642 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

    D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C

    D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D4699 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D4742 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

    D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4780 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

    D4781 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

    D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

    D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

    D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D4871 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893 Standard Test Method for Determination of Pitch Volatility

    D4898 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

    D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction

    D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D4950 Standard Classification and Specification for Automotive Service Greases

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

    D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

    D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5134 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

    D5153 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

    D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

    D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5186 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

    D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

    D5234 Standard Guide for Analysis of Ethylene Product

    D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

    D5273 Standard Guide for Analysis of Propylene Concentrates

    D5274 Standard Guide for Analysis of 1,3–Butadiene Product

    D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5292 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

    D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5°C and –35°C Using Cold-Cranking Simulator

    D5303 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

    D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    D5357 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

    D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

    D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

    D5443 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

    D5483 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

    D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

    D5598 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D5599 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

    D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5623 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

    D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

    D5758 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

    D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants

    D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5763 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

    D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

    D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

    D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

    D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5799 Standard Test Method for Determination of Peroxides in Butadiene

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

    D5846 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

    D5853 Standard Test Method for Pour Point of Crude Oils

    D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

    D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D5864 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

    D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

    D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6022 Standard Practice for Calculation of Permanent Shear Stability Index

    D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D6046 Standard Classification of Hydraulic Fluids for Environmental Impact

    D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

    D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

    D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

    D6158 Standard Specification for Mineral Hydraulic Oils

    D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

    D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

    D6175 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

    D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

    D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

    D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

    D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6203 Standard Test Method for Thermal Stability of Way Lubricants

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

    D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

    D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

    D6296 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

    D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6335 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

    D6351 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

    D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

    D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

    D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6384 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

    D6417 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

    D6421 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

    D6423 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)

    D6424 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

    D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

    D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6439 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

    D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

    D6514 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

    D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

    D6547 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

    D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

    D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

    D6553 Standard Test Method for Coolant Compatibility of Way Lubricants

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6584 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

    D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

    D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6596 Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

    D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

    D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

    D6666 Standard Guide for Evaluation of Aqueous Polymer Quenchants

    D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

    D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6729 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

    D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

    D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

    D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

    D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6?h) Heating Time

    D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

    D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

    D6812 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

    D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

    D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

    D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

    D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6839 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

    D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

    D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

    D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D6897 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

    D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

    D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D6971 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

    D6975 Standard Test Method for Cummins M11 EGR Test

    D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

    D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

    D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

    D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

    D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

    D7059 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

    D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

    D7085 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

    D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

    D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT

    D7098 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

    D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

    D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

    D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

    D7152 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

    D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

    D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

    D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

    D7169 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

    D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7206/D7206M Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography

    D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

    D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

    D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

    D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7219 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

    D7235 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

    D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

    D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

    D7278 Standard Guide for Prediction of Analyzer Sample System Lag Times

    D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7301 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

    D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

    D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

    D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

    D7342 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)

    D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method

    D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

    D7347 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

    D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7373 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

    D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

    D7398 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography

    D7412 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7415 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

    D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

    D7418 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

    D7419 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

    D7420 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

    D7442 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy

    D7450 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

    D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

    D7452 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

    D7453 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

    D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

    D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7468 Standard Test Method for Cummins ISM Test

    D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

    D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7500 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7524 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

    D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

    D7527 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

    D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

    D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

    D7544 Standard Specification for Pyrolysis Liquid Biofuel

    D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

    D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7548 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    D7563 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography

    D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

    D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

    D7590 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

    D7591 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7593 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

    D7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

    D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

    D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7624 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7646 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

    D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

    D7665 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

    D7666 Standard Specification for Triglyceride Burner Fuel

    D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

    D7668 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

    D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis

    D7670 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

    D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

    D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

    D7684 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

    D7685 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

    D7686 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7688 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

    D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

    D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7717 Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

    D7718 Standard Practice for Obtaining In-Service Samples of Lubricating Grease

    D7719 Standard Specification for High-Octane Unleaded Fuel

    D7720 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    D7721 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

    D7739 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

    D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7752 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

    D7753 Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

    D7754 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

    D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7775 Standard Guide for Measurements on Small Graphite Specimens

    D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories

    D7777 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

    D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    D7794 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7798 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC)

    D7806 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy

    D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

    D7808 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

    D7825 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer

    D7826 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

    D7828 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

    D7829 Standard Guide for Sediment and Water Determination in Crude Oil

    D7843 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

    D7844 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

    D7845 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry

    D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    D7863 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

    D7872 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

    D7873 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)

    D7874 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

    D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    D7889 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

    D7898 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

    D7899 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

    D7900 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

    D7901 Standard Specification for Dimethyl Ether for Fuel Purposes

    D7915 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set

    D7919 Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

    D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    700 ASTM petroleum standards. Available as one-time collection, collection with quarterly updates, or LAN version with quarterly updates.