ASTM Standards Source (Online):
    Paints and Related Coatings Collection


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A36/A36M Standard Specification for Carbon Structural Steel

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A536 Standard Specification for Ductile Iron Castings

    A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A623 Standard Specification for Tin Mill Products, General Requirements

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A1071/A1071M Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B75/B75M Standard Specification for Seamless Copper Tube

    B88 Standard Specification for Seamless Copper Water Tube

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B134/B134M Standard Specification for Brass Wire

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B160 Standard Specification for Nickel Rod and Bar

    B161 Standard Specification for Nickel Seamless Pipe and Tube

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

    B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

    B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

    B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

    B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar

    B449 Standard Specification for Chromates on Aluminum

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

    B464 Standard Specification for Welded UNS N08020 Alloy Pipe

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings

    B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

    B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

    B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

    B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B675 Standard Specification for UNS N08367 Welded Pipe

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B734 Standard Specification for Electrodeposited Copper for Engineering Uses

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B760 Standard Specification for Tungsten Plate, Sheet, and Foil

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

    B799 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B898 Standard Specification for Reactive and Refractory Metal Clad Plate

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

    B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C33/C33M Standard Specification for Concrete Aggregates

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C150/C150M Standard Specification for Portland Cement

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1431 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal

    C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603 Standard Test Method for Measurement of Solids in Water

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

    D34 Standard Guide for Chemical Analysis of White Pigments

    D49 Standard Test Methods of Chemical Analysis of Red Lead

    D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese

    D75/D75M Standard Practice for Sampling Aggregates

    D79 Standard Specification for Zinc Oxide Pigments

    D81 Standard Specification for Basic Carbonate White Lead Pigment

    D83 Standard Specification for Red Lead Pigment

    D85 Standard Specification for Ochre Pigment

    D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D153 Standard Test Methods for Specific Gravity of Pigments

    D154 Standard Guide for Testing Varnishes

    D185 Standard Test Methods for Coarse Particles in Pigments

    D209 Standard Specification for Lampblack Pigment

    D210 Standard Specification for Bone Black Pigment

    D211 Standard Specification for Chrome Yellow and Chrome Orange Pigments

    D233 Standard Test Methods of Sampling and Testing Turpentine

    D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D263 Standard Specification for Chrome Oxide Green Pigment

    D267 Standard Specification for Gold Bronze Powder

    D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

    D279 Standard Test Methods for Bleeding of Pigments

    D280 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments

    D281 Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out

    D283 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

    D304 Standard Specification for n-Butyl Alcohol (Butanol)

    D305 Standard Test Method for Solvent-Extractable Material in Black Pigments

    D329 Standard Specification for Acetone

    D330 Standard Specification for 2-Butoxyethanol

    D331 Standard Specification for 2-Ethoxyethanol

    D332 Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation

    D333 Standard Guide for Clear and Pigmented Lacquers

    D344 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts

    D358 Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings

    D360 Standard Specification for Shellac Varnishes

    D365 Standard Guide for Soluble Nitrocellulose Base Solutions

    D387 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller

    D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)

    D464 Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products

    D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

    D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products

    D478 Standard Specification for Zinc Yellow (Zinc Chromate) Pigments

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D509 Standard Test Methods of Sampling and Grading Rosin

    D520 Standard Specification for Zinc Dust Pigment

    D521 Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D523 Standard Test Method for Specular Gloss

    D561 Standard Specification for Carbon Black Pigment for Paint

    D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D564 Standard Test Methods for Liquid Paint Driers

    D600 Standard Specification for Liquid Paint Driers

    D602 Standard Specification for Barium Sulfate Pigments

    D605 Standard Specification for Magnesium Silicate Pigment (Talc)

    D607 Standard Specification for Wet Ground Mica Pigments

    D608 Standard Specification for Dibutyl Phthalate

    D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

    D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints

    D661 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints

    D662 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D711 Standard Test Method for No-Pick-Up Time of Traffic Paint

    D713 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

    D714 Standard Test Method for Evaluating Degree of Blistering of Paints

    D715 Standard Test Methods for Analysis of Barium Sulfate Pigment

    D716 Standard Test Methods for Evaluating Mica Pigment

    D717 Standard Test Methods for Analysis of Magnesium Silicate Pigment

    D718 Standard Test Methods for Analysis of Aluminum Silicate Pigment

    D740 Standard Specification for Methyl Ethyl Ketone

    D763 Standard Specification for Raw and Burnt Umber Pigments

    D765 Standard Specification for Raw and Burnt Sienna Pigments

    D768 Standard Specification for Yellow Iron Oxide Hydrated

    D769 Standard Specification for Black Synthetic Iron Oxide

    D770 Standard Specification for Isopropyl Alcohol

    D772 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

    D801 Standard Test Methods for Sampling and Testing Dipentene

    D802 Standard Test Methods for Sampling and Testing Pine Oils

    D803 Standard Test Methods for Testing Tall Oil

    D804 Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products

    D817 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

    D841 Standard Specification for Nitration Grade Toluene

    D843 Standard Specification for Nitration Grade Xylene

    D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

    D848 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

    D852 Standard Test Method for Solidification Point of Benzene

    D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D869 Standard Test Method for Evaluating Degree of Settling of Paint

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

    D871 Standard Test Methods of Testing Cellulose Acetate

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D889 Standard Test Method for Volatile Oil in Rosin

    D890 Standard Test Method for Water in Liquid Pine Chemicals

    D913 Standard Practice for Evaluating Degree of Traffic Paint Line Wear

    D914 Standard Test Methods for Ethylcellulose

    D962 Standard Specification for Aluminum Powder and Paste Pigments for Paints

    D964 Standard Specification for Metallic Copper Powder for Use in Antifouling Paints

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

    D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

    D1007 Standard Specification for sec-Butyl Alcohol

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1135 Standard Test Methods for Chemical Analysis of Blue Pigments

    D1141 Standard Practice for the Preparation of Substitute Ocean Water

    D1152 Standard Specification for Methanol (Methyl Alcohol)

    D1153 Standard Specification for Methyl Isobutyl Ketone1, 2

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1193 Standard Specification for Reagent Water

    D1199 Standard Specification for Calcium Carbonate Pigments

    D1200 Standard Test Method for Viscosity by Ford Viscosity Cup

    D1208 Standard Test Methods for Common Properties of Certain Pigments

    D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

    D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1240 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

    D1257 Standard Specification for High-Gravity Glycerin

    D1259 Standard Test Methods for Nonvolatile Content of Resin Solutions

    D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils

    D1280 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

    D1296 Standard Test Method for Odor of Volatile Solvents and Diluents

    D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments

    D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

    D1309 Standard Test Method for Settling Properties of Traffic Paints During Storage

    D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

    D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

    D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents

    D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

    D1348 Standard Test Methods for Moisture in Cellulose

    D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)

    D1363 Standard Test Method for Permanganate Time of Acetone and Methanol

    D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1366 Standard Practice for Reporting Particle Size Characteristics of Pigments

    D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

    D1394 Standard Test Methods for Chemical Analysis of White Titanium Pigments

    D1414 Standard Test Methods for Rubber O-Rings

    D1439 Standard Test Methods for Sodium Carboxymethylcellulose

    D1474/D1474M Standard Test Methods for Indentation Hardness of Organic Coatings

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1476 Standard Test Method for Heptane Miscibility of Lacquer Solvents

    D1483 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method

    D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

    D1535 Standard Practice for Specifying Color by the Munsell System

    D1544 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

    D1545 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method

    D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

    D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

    D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

    D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D1614 Standard Test Method for Alkalinity in Acetone

    D1617 Standard Test Method for Ester Value of Solvents and Thinners

    D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

    D1640 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

    D1644 Standard Test Methods for Nonvolatile Content of Varnishes

    D1648 Standard Specification for Basic Lead Silicochromate Pigment

    D1649 Standard Specification for Strontium Chromate Pigment

    D1652 Standard Test Method for Epoxy Content of Epoxy Resins

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

    D1695 Standard Terminology of Cellulose and Cellulose Derivatives

    D1696 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide

    D1718 Standard Specification for Isobutyl Acetate (95% Grade)

    D1719 Standard Specification for Isobutyl Alcoholl

    D1720 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions

    D1722 Standard Test Method for Water Miscibility of Water-Soluble Solvents

    D1725 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

    D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

    D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

    D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

    D1795 Standard Test Method for Intrinsic Viscosity of Cellulose

    D1836 Standard Specification for Commercial Hexanes

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1844 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate

    D1845 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment

    D1849 Standard Test Method for Package Stability of Paint

    D1926 Standard Test Methods for Carboxyl Content of Cellulose

    D1969 Standard Specification for 2-Ethylhexanol

    D1978 Standard Guide for Analysis of Electrocoat Bath Samples

    D1981 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids

    D1982 Standard Test Method for Titer of Fatty Acids

    D2010/D2010M Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique

    D2059/D2059M Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

    D2064 Standard Test Method for Print Resistance of Architectural Paints

    D2065 : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress

    D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

    D2086 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

    D2087 Standard Test Method for Iron in Formaldehyde Solutions

    D2091 Standard Test Method for Print Resistance of Lacquers

    D2119 Standard Test Method for Aldehydes in Styrene Monomer

    D2121 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)

    D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

    D2190 Standard Specification for Vinyl Acetate

    D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate

    D2192 Standard Test Method for Purity of Aldehydes and Ketones

    D2193 Standard Test Method for Hydroquinone in Vinyl Acetate

    D2194 Standard Test Method for Concentration of Formaldehyde Solutions

    D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

    D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

    D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

    D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2218 Standard Specification for Molybdate Orange Pigments

    D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D2245 Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2337 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers

    D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers

    D2340 Standard Test Method for Peroxides in Styrene Monomer

    D2349 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

    D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints

    D2351 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints

    D2352 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints

    D2354 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles

    D2359 Standard Specification for Refined Benzene-535

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D2363 Standard Test Methods for Hydroxypropyl Methylcellulose

    D2364 Standard Test Methods for Hydroxyethylcellulose

    D2369 Standard Test Method for Volatile Content of Coatings

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2371 Standard Test Method for Pigment Content of Solvent-Reducible Paints

    D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints

    D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method

    D2374 Standard Test Method for Lead in Paint Driers by EDTA Method

    D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method

    D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

    D2379 Standard Test Method for Acidity of Formaldehyde Solutions

    D2380 Standard Test Method for Methanol Content of Formaldehyde Solutions

    D2439 Standard Specification for Refined Phenol

    D2448 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment

    D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings

    D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

    D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

    D2572 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

    D2574 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

    D2613 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

    D2616 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale

    D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

    D2627 Standard Specification for Diacetone Alcohol

    D2634 Standard Specification for Methyl Amyl Acetate (95?% Grade)

    D2635 Standard Specification for Methyl Isobutyl Carbinol

    D2636 Standard Specification for Hexylene Glycol

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

    D2693 Standard Specification for Ethylene Glycol

    D2694 Standard Specification for Diethylene Glycol

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2698 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging

    D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2745 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements

    D2758 Standard Test Method for Engine Coolants by Engine Dynamometer

    D2792 Standard Test Method for Solvent and Fuel Resistance of Traffic Paint

    D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

    D2827 Standard Specification for Styrene Monomer

    D2832 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

    D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

    D2847 Standard Practice for Testing Engine Coolants in Car and Light Truck Service

    D2916 Standard Specification for Isophorone

    D2917 Standard Specification for Methyl Isoamyl Ketone

    D2921 Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products

    D2929 Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence

    D2967 Standard Test Method for Corner Coverage of Powder Coatings

    D3002 Standard Guide for Evaluation of Coatings Applied to Plastics

    D3003 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

    D3021 Standard Specification for Phthalocyanine Green Pigments

    D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill

    D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

    D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

    D3128 Standard Specification for 2-Methoxyethanol

    D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

    D3131 Standard Specification for Isopropyl Acetate (99?% Grade)

    D3134 Standard Practice for Establishing Color and Gloss Tolerances

    D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)

    D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints

    D3170 Standard Test Method for Chipping Resistance of Coatings

    D3193 Standard Specification for Ethylbenzene

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3256 Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments

    D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

    D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining

    D3260 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

    D3271 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

    D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

    D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

    D3276 Standard Guide for Painting Inspectors (Metal Substrates)

    D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    D3280 Standard Test Methods for Analysis of White Zinc Pigments

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3316 Standard Test Method for Stability of Perchloroethylene with Copper

    D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

    D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

    D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products

    D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride

    D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3456 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

    D3516 Standard Test Methods for Ashing Cellulose

    D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer

    D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

    D3545 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

    D3546 Standard Test Method for Formic Acid in Glacial Acetic Acid

    D3548 Standard Specification for Ethyl Acrylate

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3618 Standard Test Method for Detection of Lead in Paint and Dried Paint Films

    D3620 Standard Specification for Glacial Acetic Acid

    D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

    D3623 Standard Test Method for Testing Antifouling Panels in Shallow Submergence

    D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy

    D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy

    D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

    D3720 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction

    D3721 Standard Specification for Synthetic Red Iron Oxide Pigment

    D3722 Standard Specification for Natural Red and Brown Iron Oxide Pigments

    D3723 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

    D3724 Standard Specification for Synthetic Brown Iron Oxide Pigment

    D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3732 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

    D3734 Standard Specification for High-Flash Aromatic Naphthas

    D3735 Standard Specification for VM&P Naphthas

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

    D3794 Standard Guide for Testing Coil Coatings

    D3804 Standard Test Method for Iron in Paint Driers by EDTA Method

    D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

    D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities

    D3852 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid

    D3872 Standard Test Method for Ferrous Iron in Iron Oxides

    D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography

    D3891 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products

    D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

    D3911 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

    D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants

    D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

    D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

    D3926 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries

    D3928 Standard Test Method for Evaluation of Gloss or Sheen Uniformity

    D3934 Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus

    D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

    D3964 Standard Practice for Selection of Coating Specimens for Appearance Measurements

    D3969 Standard Test Method for Zirconium in Paint Driers by EDTA Method

    D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

    D3971 Standard Test Method for Dichloromethane-Soluble Matter in Cellulose

    D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method

    D3989 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

    D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

    D4039 Standard Test Method for Reflection Haze of High-Gloss Surfaces

    D4040 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4061 Standard Test Method for Retroreflectance of Horizontal Coatings

    D4062 Standard Test Method for Leveling of Paints by Draw-Down Method

    D4077 Standard Specification for Cumene (Isopropylbenzene)

    D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

    D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

    D4086 Standard Practice for Visual Evaluation of Metamerism

    D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

    D4139 Standard Guide for Determining Volatile and Nonvolatile Content of Pigments

    D4140 Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents

    D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

    D4142 Standard Guide for Testing Epoxy Resins

    D4143 Standard Guide for Testing Latex Vehicles

    D4144 Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing

    D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

    D4146 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

    D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar

    D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

    D4209 Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

    D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

    D4217 Standard Test Method for Gel Time of Thermosetting Coating Powder

    D4227 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

    D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

    D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

    D4242 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders

    D4258 Standard Practice for Surface Cleaning Concrete for Coating

    D4259 Standard Practice for Abrading Concrete

    D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete

    D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

    D4262 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces

    D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

    D4285 Standard Test Method for Indicating Oil or Water in Compressed Air

    D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities

    D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer

    D4288 Standard Specification for Calcium Borosilicate Pigments

    D4297 Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)

    D4301 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

    D4302 Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints

    D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

    D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

    D4340 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4360 Standard Specification for Methyl n-Amyl Ketone

    D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

    D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

    D4370 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath

    D4399 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths

    D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

    D4412 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits

    D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages

    D4416 Standard Specification for Acrylic Acid

    D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

    D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

    D4449 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance

    D4450 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment

    D4451 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing

    D4457 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph

    D4462 Standard Specification for Zinc Hydroxy Phosphite Pigment

    D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

    D4487 Standard Test Methods for Analysis of Calcium Borosilicate

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities

    D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4563 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

    D4584 Standard Test Method for Measuring Apparent pH of Electrocoat Baths

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D4610 Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings

    D4614 Standard Specification for Ethyl Acetate (All Grades)

    D4615 Standard Specification for n-Butyl Acetate (All Grades)

    D4618 Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application

    D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4640 Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins

    D4658 Standard Test Method for Sulfide Ion in Water

    D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

    D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings

    D4709 Standard Specification for Methyl Acrylate

    D4710 Standard Specification for Acetaldehyde

    D4713 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

    D4734 Standard Specification for Refined Benzene-545

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

    D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4764 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint

    D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

    D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

    D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4789 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals

    D4794 Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography

    D4795 Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4827 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography

    D4828 Standard Test Methods for Practical Washability of Organic Coatings

    D4834 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy

    D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate

    D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

    D4837 Standard Specification for Propylene Glycol Monomethyl Ether

    D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

    D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water

    D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

    D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

    D4941 Standard Practice for Preparing Drawdowns of Artists' Paste Paints

    D4942 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

    D4946 Standard Test Method for Blocking Resistance of Architectural Paints

    D4948 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D5007 Standard Test Method for Wet-to-Dry Hiding Change

    D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

    D5009 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

    D5010 Standard Guide for Testing Printing Inks and Related Materials

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5043 Standard Practice for Field Identification of Coatings

    D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

    D5062 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

    D5063 Standard Guide for Use of Certification of Coating Conformance Form

    D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

    D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

    D5067 Standard Specification for Artists' Watercolor Paints

    D5068 Standard Practice for Preparation of Paint Brushes for Evaluation

    D5069/D5069M Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

    D5087 Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

    D5098 Standard Specification for Artists' Acrylic Dispersion Paints

    D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

    D5108 Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

    D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D5136 Standard Specification for High Purity p-Xylene

    D5137 Standard Specification for Hexyl Acetate

    D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

    D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

    D5145 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants

    D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

    D5165 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

    D5166 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

    D5178 Standard Test Method for Mar Resistance of Organic Coatings

    D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

    D5181 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

    D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

    D5200 Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

    D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

    D5211 Standard Specification for Xylenes for p-Xylene Feedstock

    D5235 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products

    D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

    D5301 Standard Practice for Physical Characterization of Paint Brushes

    D5309 Standard Specification for Cyclohexane 999

    D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5325 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

    D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

    D5380 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis

    D5381 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

    D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings

    D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

    D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

    D5400 Standard Test Methods for Hydroxypropylcellulose

    D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials

    D5471 Standard Specification for O-Xylene 980

    D5478 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer

    D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

    D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

    D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

    D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D5517 Standard Test Method for Determining Extractability of Metals from Art Materials

    D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

    D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D5588 Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas

    D5589 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement

    D5590 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

    D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

    D5618 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

    D5682 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

    D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

    D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

    D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure

    D5723 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

    D5724 Standard Specification for Gouache Paints

    D5767 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces

    D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5794 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography

    D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus

    D5796 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

    D5861 Standard Guide for Significance of Particle Size Measurements of Coating Powders

    D5871 Standard Specification for Benzene for Cyclohexane Feedstock

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

    D5896 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials

    D5897 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method

    D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

    D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

    D5913 Standard Test Method for Evaluation of Cleanability of Paint Brushes

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions

    D5959 Standard Test Method for Bulk Density of Level Paintbrush Filaments

    D5965 Standard Test Methods for Specific Gravity of Coating Powders

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?°C

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

    D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D6073 Standard Test Method for Relative Setting of Heatset Printing Inks

    D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

    D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

    D6131 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments

    D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

    D6133 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

    D6137 Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6165 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials

    D6166 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

    D6188 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

    D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

    D6191 Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

    D6206 Standard Practice for Sampling of Coating Films

    D6208 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

    D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D6267/D6267M Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

    D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

    D6280 Standard Specification for Zinc Phosphate Pigments

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6336 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

    D6337 Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics

    D6367 Standard Specification for AMS (α-Methylstyrene)

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

    D6419 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

    D6438 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography

    D6440 Standard Terminology Relating to Hydrocarbon Resins

    D6441 Standard Test Methods for Measuring the Hiding Power of Powder Coatings

    D6442 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6486 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings

    D6487 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press

    D6488 Standard Terminology Relating to Print Problems

    D6489 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

    D6490 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

    D6491 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

    D6492 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

    D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M Standard Practice for Determination of Graffiti Resistance

    D6579 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

    D6580 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135? °C

    D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

    D6605 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

    D6606 Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

    D6619 Standard Practice for Incorporating Pigments by High Speed Dispersion

    D6621 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

    D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

    D6665 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6676/D6676M Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating

    D6677 Standard Test Method for Evaluating Adhesion by Knife

    D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

    D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof

    D6688 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

    D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D6736 Standard Test Method for Burnish Resistance of Latex Paints

    D6737 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments

    D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6801 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

    D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

    D6846 Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

    D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

    D6886 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography

    D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D6901 Standard Specification for Artists' Colored Pencils

    D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

    D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D6905 Standard Test Method for Impact Flexibility of Organic Coatings

    D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

    D6942 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments

    D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings

    D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling

    D6957 Standard Practice for Measuring Curl in Paint Brush Filling Material

    D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions

    D6990 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

    D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7054 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7087 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

    D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

    D7089 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

    D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

    D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts

    D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

    D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7163 Standard Test Method for Specular Gloss of Printed Matter

    D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

    D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

    D7188 Standard Terminology for Printing Inks, Materials, and Processes

    D7189 Standard Test Method for Relative Mileage of News Ink on Newsprint

    D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

    D7195 Standard Guide for Protocol for Setting Color Specifications for a Material

    D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates

    D7232 Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight

    D7233 Standard Test Method for Testing Fracture of Level Paintbrush Filaments

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7244 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

    D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

    D7271 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer

    D7305 Standard Test Method for Reflection Density of Printed Matter

    D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

    D7307 Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

    D7308 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

    D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

    D7354 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings

    D7355 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings

    D7356/D7356M Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

    D7357 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete

    D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

    D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

    D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration

    D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

    D7377 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

    D7378 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

    D7393 Standard Practice for Indicating Oil in Abrasives

    D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers

    D7395 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7488 Standard Test Method for Open Time of Latex Paints

    D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

    D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

    D7491 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

    D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    D7540 Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller

    D7541 Standard Practice for Estimating Critical Surface Tensions

    D7583 Standard Test Method for John Deere Coolant Cavitation Test

    D7588 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

    D7602 Standard Practice for Installation of Vulcanized Rubber Linings

    D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

    D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

    D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

    D7680 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

    D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

    D7733 Standard Specification for Acrylic Dispersion Ground

    D7734/D7734M Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method

    D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

    D7768 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

    D7786 Standard Test Method for Determining Enamel Holdout

    D7787/D7787M Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings

    D7801 Standard Terminology for Paint Brush Application Tools

    D7802 Standard Terminology for Paint Roller Application Tools

    D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7804 Standard Test Method for Fiber Shedding of Paint Roller Covers

    D7805 Standard Terminology for Printing Ink Vehicles and Related Materials

    D7834 Standard Test Method for Filling Material Shedding of Paint Brushes

    D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine

    D7836 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

    D7855/D7855M Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

    D7867 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

    D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings

    D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    D7893 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E28 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus

    E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E179 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials

    E259 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries

    E284 Standard Terminology of Appearance

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E312 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)

    E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

    E448 Standard Practice for Scleroscope Hardness Testing of Metallic Materials

    E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

    E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates

    E651/E651M Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building

    E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

    E712 Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems

    E745 Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems

    E805 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

    E808 Standard Practice for Describing Retroreflection

    E809 Standard Practice for Measuring Photometric Characteristics of Retroreflectors

    E810 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

    E811 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions

    E848 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates

    E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

    E1164 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation

    E1247 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry

    E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

    E1331 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

    E1336 Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry

    E1341 Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry

    E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements

    E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

    E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

    E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

    E1360 Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System

    E1455 Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters

    E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

    E1478 Standard Practice for Visual Color Evaluation of Transparent Sheet Materials

    E1499 Standard Guide for Selection, Evaluation, and Training of Observers

    E1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E1682 Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit

    E1708 Standard Practice for Electronic Interchange of Color and Appearance Data

    E1709 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle

    E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

    E1767 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials

    E1808 Standard Guide for Designing and Conducting Visual Experiments

    E2022 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration

    E2030 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings

    E2066 Standard Guide for Validation of Laboratory Information Management Systems

    E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

    E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

    E2152 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data

    E2153 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color

    E2159 Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts

    E2175 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers

    E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

    E2194 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials

    E2214 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

    E2301 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry

    E2302 Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer

    E2367 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter

    E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

    E2387 Standard Practice for Goniometric Optical Scatter Measurements

    E2466 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology

    E2480 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands

    E2501 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings

    E2539 Standard Practice for Multiangle Color Measurement of Interference Pigments

    E2540 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle

    E2545 Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras

    E2546 Standard Practice for Instrumented Indentation Testing

    E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source

    E2670 Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras

    E2729 Standard Practice for Rectification of Spectrophotometric Bandpass Differences

    E2832 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

    E2867 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

    F326 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

    F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

    F485 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F697 Standard Practice for Care and Use of Athletic Mouth Protectors

    F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

    F746 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

    F747 Standard Terminology Relating to Amusement Rides and Devices

    F770 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F853 Standard Practice for Maintenance Procedures for Amusement Rides and Devices

    F880 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F897 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

    F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

    F1089 Standard Test Method for Corrosion of Surgical Instruments

    F1110 Standard Test Method for Sandwich Corrosion Test

    F1111 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

    F1113 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

    F1159 Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

    F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F1801 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

    F1875 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness

    F2007 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities

    F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

    F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

    F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

    F2137 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

    F2291 Standard Practice for Design of Amusement Rides and Devices

    F2374 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices

    F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions

    F2376 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

    F2460 Standard Practice for Special Requirements for Bumper Boats

    F2461 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment

    F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

    G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)

    G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

    G4 Standard Guide for Conducting Corrosion Tests in Field Applications

    G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

    G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings

    G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

    G9 Standard Test Method for Water Penetration into Pipeline Coatings

    G10 Standard Test Method for Specific Bendability of Pipeline Coatings

    G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings

    G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel

    G13/G13M Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)

    G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)

    G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data

    G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

    G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines

    G20 Standard Test Method for Chemical Resistance of Pipeline Coatings

    G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

    G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

    G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

    G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

    G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

    G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

    G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

    G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

    G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

    G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

    G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures

    G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution

    G46 Standard Guide for Examination and Evaluation of Pitting Corrosion

    G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

    G48 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

    G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

    G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

    G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

    G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

    G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials

    G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

    G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

    G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

    G60 Standard Practice for Conducting Cyclic Humidity Exposures

    G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

    G62 Standard Test Methods for Holiday Detection in Pipeline Coatings

    G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

    G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

    G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

    G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

    G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

    G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

    G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

    G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

    G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

    G85 Standard Practice for Modified Salt Spray (Fog) Testing

    G87 Standard Practice for Conducting Moist SO2 Tests

    G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

    G92 Standard Practice for Characterization of Atmospheric Test Sites

    G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)

    G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)

    G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

    G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

    G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

    G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

    G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution

    G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

    G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

    G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

    G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

    G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

    G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

    G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

    G119 Standard Guide for Determining Synergism Between Wear and Corrosion

    G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

    G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

    G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet

    G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals

    G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

    G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

    G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

    G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

    G157 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

    G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks

    G161 Standard Guide for Corrosion-Related Failure Analysis

    G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils

    G165 Standard Practice for Determining Rail-to-Earth Resistance

    G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

    G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

    G180 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

    G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

    G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

    G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

    G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

    G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

    G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

    G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

    G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

    G199 Standard Guide for Electrochemical Noise Measurement

    G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

    G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage

    G205 Standard Guide for Determining Corrosivity of Crude Oils

    900 ASTM standards on paint, appearance, and aromatic hydrocarbons. Available as one-time collection, collection with quarterly updates, or LAN version with quarterly updates.