ASTM Standards Source (Online):
    Metals Collection


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    A1 Standard Specification for Carbon Steel Tee Rails

    A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A34/A34M Standard Practice for Sampling and Procurement Testing of Magnetic Materials

    A36/A36M Standard Specification for Carbon Structural Steel

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A65 Standard Specification for Steel Track Spikes

    A66 Standard Specification for Steel Screw Spikes

    A67 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A74 Standard Specification for Cast Iron Soil Pipe and Fittings

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A99 Standard Specification for Ferromanganese

    A100 Standard Specification for Ferrosilicon

    A101 Standard Specification for Ferrochromium

    A102 Standard Specification for Ferrovanadium

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A111 Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A125 Standard Specification for Steel Springs, Helical, Heat-Treated

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A128/A128M Standard Specification for Steel Castings, Austenitic Manganese

    A131/A131M Standard Specification for Structural Steel for Ships

    A132 Standard Specification for Ferromolybdenum

    A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A144 Specification for Ferrotungsten

    A146 Standard Specification for Molybdenum Oxide Products

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A159 Standard Specification for Automotive Gray Iron Castings

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A197/A197M Standard Specification for Cupola Malleable Iron

    A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A220/A220M Standard Specification for Pearlitic Malleable Iron

    A225/A225M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A255 Standard Test Methods for Determining Hardenability of Steel

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A263 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A299/A299M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

    A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

    A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A319 Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A322 Standard Specification for Steel Bars, Alloy, Standard Grades

    A323 Standard Specification for Ferroboron

    A324 Standard Specification for Ferrotitanium

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A327/A327M Standard Test Methods for Impact Testing of Cast Irons

    A328/A328M Standard Specification for Steel Sheet Piling

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A338 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)

    A340 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

    A341/A341M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

    A342/A342M Standard Test Methods for Permeability of Weakly Magnetic Materials

    A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

    A345 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

    A348/A348M Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

    A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A353/A353M Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A355 Standard Specification for Steel Bars, Alloys, for Nitriding

    A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A363 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

    A367 Standard Test Methods of Chill Testing of Cast Iron

    A368 Standard Specification for Stainless Steel Wire Strand

    A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A384/A384M Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

    A385/A385M Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

    A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A388/A388M Standard Practice for Ultrasonic Examination of Steel Forgings

    A389/A389M Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A400 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A413/A413M Standard Specification for Carbon Steel Chain

    A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A418/A418M Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

    A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A423/A423M Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

    A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A436 Standard Specification for Austenitic Gray Iron Castings

    A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

    A439 Standard Specification for Austenitic Ductile Iron Castings

    A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    A455/A455M Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

    A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape

    A460 Standard Specification for Copper-Clad Steel Wire Strand

    A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A466/A466M Standard Specification for Weldless Chain

    A467/A467M Standard Specification for Machine and Coil Chain

    A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A472/A472M Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

    A473 Standard Specification for Stainless Steel Forgings

    A474 Standard Specification for Aluminum-Coated Steel Wire Strand

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A481 Standard Specification for Chromium Metal

    A482/A482M Standard Specification for Ferrochrome-Silicon

    A483/A483M Standard Specification for Silicomanganese

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A485 Standard Specification for High Hardenability Antifriction Bearing Steel

    A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A492 Standard Specification for Stainless Steel Rope Wire

    A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A495 Standard Specification for Calcium-Silicon Alloys

    A498/A498M Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A502 Standard Specification for Rivets, Steel, Structural

    A503/A503M Standard Specification for Ultrasonic Examination of Forged Crankshafts

    A504/A504M Standard Specification for Wrought Carbon Steel Wheels

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A511/A511M Standard Specification for Seamless Stainless Steel Mechanical Tubing

    A512 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A522/A522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

    A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A531/A531M Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A533/A533M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A534 Standard Specification for Carburizing Steels for Anti-Friction Bearings

    A536 Standard Specification for Ductile Iron Castings

    A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications

    A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A550 Standard Specification for Ferrocolumbium

    A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A553/A553M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A556/A556M Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

    A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy

    A561 Standard Practice for Macroetch Testing of Tool Steel Bars

    A562/A562M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A577/A577M Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

    A580/A580M Standard Specification for Stainless Steel Wire

    A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A596/A596M Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

    A597 Standard Specification for Cast Tool Steel

    A598/A598M Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

    A599/A599M Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

    A600 Standard Specification for Tool Steel High Speed

    A601/A601M Standard Specification for Electrolytic Manganese Metal

    A602 Standard Specification for Automotive Malleable Iron Castings

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A604/A604M Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A609/A609M Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

    A610 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A612/A612M Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A623 Standard Specification for Tin Mill Products, General Requirements

    A623M Standard Specification for Tin Mill Products, General Requirements [Metric]

    A624/A624M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

    A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

    A626/A626M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

    A630 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

    A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A636 Standard Specification for Nickel Oxide Sinter

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A640 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

    A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

    A644 Standard Terminology Relating to Iron Castings

    A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A650/A650M Standard Specification for Tin Mill Products, Black Plate, Double Reduced

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A657/A657M Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

    A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A660/A660M Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

    A662/A662M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A663/A663M Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

    A664 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A667/A667M Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A677 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A681 Standard Specification for Tool Steels Alloy

    A683 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A686 Standard Specification for Tool Steel, Carbon

    A688/A688M Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A689 Standard Specification for Carbon and Alloy Steel Bars for Springs

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A694/A694M Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

    A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

    A697/A697M Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

    A698/A698M Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

    A701/A701M Standard Specification for Ferromanganese-Silicon

    A702 Standard Specification for Steel Fence Posts, Hot Wrought

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A707/A707M Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A711/A711M Standard Specification for Steel Forging Stock

    A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A716 Standard Specification for Ductile Iron Culvert Pipe

    A717/A717M Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

    A719/A719M Standard Test Method for Lamination Factor of Magnetic Materials

    A720/A720M Standard Test Method for Ductility of Nonoriented Electrical Steel

    A721/A721M Standard Test Method for Ductility of Oriented Electrical Steel

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A724/A724M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

    A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

    A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A729/A729M Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A732/A732M Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

    A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A734/A734M Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

    A735/A735M Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

    A736/A736M Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel

    A737/A737M Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

    A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A745/A745M Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

    A746 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A747/A747M Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A748/A748M Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

    A754/A754M Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A756 Standard Specification for Stainless Anti-Friction Bearing Steel

    A757/A757M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A758/A758M Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

    A759 Standard Specification for Carbon Steel Crane Rails

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A772/A772M Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

    A773/A773M Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs

    A774/A774M Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A787/A787M Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A799/A799M Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

    A800/A800M Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

    A801 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

    A802/A802M Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A803/A803M Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

    A804/A804M Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A811 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A827/A827M Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M Standard Specification for Alloy Structural Steel Plates

    A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A832/A832M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A836/A836M Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

    A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

    A839 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

    A841/A841M Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A842 Standard Specification for Compacted Graphite Iron Castings

    A844/A844M Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A848 Standard Specification for Low-Carbon Magnetic Iron

    A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A855/A855M Standard Specification for Zinc-5?% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

    A856/A856M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A858/A858M Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

    A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A860/A860M Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

    A861 Standard Specification for High-Silicon Iron Pipe and Fittings

    A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A866 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

    A867 Standard Specification for Iron-Silicon Relay Steels

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process

    A876 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A889/A889M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A892 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

    A893/A893M Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

    A894/A894M Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A896/A896M Standard Practice for Conducting Case Studies on Galvanized Structures

    A897/A897M Standard Specification for Austempered Ductile Iron Castings

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A899 Standard Specification for Steel Wire, Epoxy-Coated

    A900/A900M Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

    A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

    A902 Standard Terminology Relating to Metallic Coated Steel Products

    A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

    A904 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts

    A905 Standard Specification for Steel Wire, Pressure Vessel Winding

    A906/A906M Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

    A908 Standard Specification for Stainless Steel Needle Tubing

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A910/A910M Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A912/A912M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A914/A914M Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

    A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A917 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

    A918 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A920/A920M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

    A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

    A922 Standard Specification for Silicon Metal

    A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A925 Standard Specification for Zinc-5?% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

    A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

    A927/A927M Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

    A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

    A932/A932M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

    A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A937/A937M Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

    A938 Standard Test Method for Torsion Testing of Wire

    A939/A939M Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A942/A942M Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

    A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A956 Standard Test Method for Leeb Hardness Testing of Steel Products

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A964/A964M Standard Specification for Corrugated Steel Box Culverts

    A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A971/A971M Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

    A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

    A973/A973M Standard Specification for Grade 100 Alloy Steel Chain

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    A976 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

    A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

    A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

    A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    A980/A980M Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A987/A987M Standard Practice for Measuring Shape Characteristics of Tin Mill Products

    A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A990/A990M Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

    A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

    A992/A992M Standard Specification for Structural Steel Shapes

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A995/A995M Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A997 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

    A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1001 Standard Specification for High Strength Steel Castings in Heavy Sections

    A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

    A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

    A1007 Standard Specification for Carbon Steel Wire for Wire Rope

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1009 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications

    A1010/A1010M Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1012 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

    A1013 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

    A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

    A1015 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1020/A1020M Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

    A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

    A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1025/A1025M Standard Specification for Ferroalloys, General Requirements

    A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1030/A1030M Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

    A1033 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1036 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

    A1037/A1037M Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

    A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1046/A1046M Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

    A1047/A1047M Standard Test Method for Pneumatic Leak Testing of Tubing

    A1048/A1048M Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

    A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A1059/A1059M Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

    A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand

    A1062 Standard Specification for Steel Castings Sampling

    A1063/A1063M Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1065/A1065M Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

    A1066/A1066M Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    A1067/A1067M Standard Specification for Test Coupons for Steel Castings

    A1068 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A1071/A1071M Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys

    A1072/A1072M Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

    A1073/A1073M Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet

    A1074 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

    A1075 Standard Specification for Flanged Steel U-Channel Posts

    A1076/A1076M Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A1078/A1078M Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

    A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A1080 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    A1082/A1082M Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

    A1083/A1083M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1084 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

    A1087/A1087M Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

    A1088 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A1089/A1089M Standard Specification for Highly Loaded Anti-Friction Bearing Steel

    A1090/A1090M Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance

    B1 Standard Specification for Hard-Drawn Copper Wire

    B2 Standard Specification for Medium-Hard-Drawn Copper Wire

    B3 Standard Specification for Soft or Annealed Copper Wire

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

    B6 Standard Specification for Zinc

    B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

    B9 Standard Specification for Bronze Trolley Wire

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as Babbitt Metal)

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B29 Standard Specification for Refined Lead

    B30 Standard Specification for Copper Alloys in Ingot Form

    B32 Standard Specification for Solder Metal

    B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

    B39 Standard Specification for Nickel

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B47 Standard Specification for Copper Trolley Wire

    B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

    B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B63 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

    B66 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

    B67 Standard Specification for Car and Tender Journal Bearings, Lined

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B70 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

    B75/B75M Standard Specification for Seamless Copper Tube

    B76 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

    B77 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

    B78 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

    B80 Standard Specification for Magnesium-Alloy Sand Castings

    B84 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B88 Standard Specification for Seamless Copper Water Tube

    B90/B90M Standard Specification for Magnesium-Alloy Sheet and Plate

    B91 Standard Specification for Magnesium-Alloy  Forgings

    B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting

    B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    B94 Standard Specification for Magnesium-Alloy Die Castings

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

    B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B106 Standard Test Methods for Flexivity of Thermostat Metals

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B114 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

    B115 Standard Specification for Electrolytic Copper Cathode

    B116 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B134/B134M Standard Specification for Brass Wire

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B136 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

    B137 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B160 Standard Specification for Nickel Rod and Bar

    B161 Standard Specification for Nickel Seamless Pipe and Tube

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

    B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

    B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

    B176 Standard Specification for Copper-Alloy Die Castings

    B177/B177M Standard Guide for Engineering Chromium Electroplating

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

    B193 Standard Test Method for Resistivity of Electrical Conductor Materials

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B200 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B208 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B215 Standard Practices for Sampling Metal Powders

    B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

    B224 Standard Classification of Coppers

    B226 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors

    B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B229 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B237 Standard Specification for Refined Antimony

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating

    B243 Standard Terminology of Powder Metallurgy

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B246 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B252 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

    B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating

    B254 Standard Practice for Preparation of and Electroplating on Stainless Steel

    B258 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

    B263/B263M Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B267 Standard Specification for Wire for Use In Wire-Wound Resistors

    B271/B271M Standard Specification for Copper-Base Alloy Centrifugal Castings

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought

    B276 Standard Test Method for Apparent Porosity in Cemented Carbides

    B277 Standard Test Method for Hardness of Electrical Contact Materials

    B279 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B281 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

    B294 Standard Test Method for Hardness Testing of Cemented Carbides

    B296 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

    B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

    B299 Standard Specification for Titanium Sponge

    B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B319 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating

    B320 Standard Practice for Preparation of Iron Castings for Electroplating

    B322 Standard Guide for Cleaning Metals Prior to Electroplating

    B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

    B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

    B329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B339 Standard Specification for Pig Tin

    B343 Standard Practice for Preparation of Nickel for Electroplating with Nickel

    B344 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B349/B349M Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

    B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

    B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

    B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

    B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

    B354 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

    B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

    B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

    B362 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

    B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

    B364 Standard Specification for Tantalum and Tantalum Alloy Ingots

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B369 Standard Specification for Copper-Nickel Alloy Castings

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod

    B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

    B373 Standard Specification for Aluminum Foil for Capacitors

    B374 Standard Terminology Relating to Electroplating

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

    B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

    B388 Standard Specification for Thermostat Metal Sheet and Strip

    B389 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

    B391 Standard Specification for Niobium and Niobium Alloy Ingots

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

    B403 Standard Specification for Magnesium-Alloy Investment Castings

    B406 Standard Test Method for Transverse Rupture Strength of Cemented Carbides

    B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B413 Standard Specification for Refined Silver

    B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire

    B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

    B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

    B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B427 Standard Specification for Gear Bronze Alloy Castings

    B428 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

    B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

    B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B440 Standard Specification for Cadmium

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

    B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar

    B447 Standard Specification for Welded Copper Tube

    B449 Standard Specification for Chromates on Aluminum

    B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application

    B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B457 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

    B464 Standard Specification for Welded UNS N08020 Alloy Pipe

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B468 Standard Specification for Welded UNS N08020 Alloy Tubes

    B470 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

    B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B477 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy

    B478 Standard Test Method for Cross Curvature of Thermostat Metals

    B479 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

    B480 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

    B481 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

    B482 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

    B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B490 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings

    B494/B494M Standard Specification for Primary Zirconium

    B495 Standard Specification for Zirconium and Zirconium Alloy Ingots

    B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

    B497 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B500/B500M Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors

    B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

    B502/B502M Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

    B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B507 Standard Practice for Design of Articles to Be Electroplated on Racks

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

    B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

    B515 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

    B516 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes

    B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

    B520 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

    B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

    B522 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

    B527 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds

    B528 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B530 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

    B532 Standard Specification for Appearance of Electroplated Plastic Surfaces

    B533 Standard Test Method for Peel Strength of Metal Electroplated Plastics

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

    B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

    B540 Standard Specification for Palladium Electrical Contact Alloy

    B541 Standard Specification for Gold Electrical Contact Alloy

    B542 Standard Terminology Relating to Electrical Contacts and Their Use

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B548 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

    B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B556 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B558 Standard Practice for Preparation of Nickel Alloys for Electroplating

    B559 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

    B560 Standard Specification for Modern Pewter Alloys

    B561 Standard Specification for Refined  Platinum

    B562 Standard Specification for Refined Gold

    B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

    B564 Standard Specification for Nickel Alloy Forgings

    B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

    B566 Standard Specification for Copper-Clad Aluminum Wire

    B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B576 Standard Guide for Arc Erosion Testing of Electrical Contact Materials

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B578 Standard Test Method for Microhardness of Electroplated Coatings

    B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

    B580 Standard Specification for Anodic Oxide Coatings on Aluminum

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B587 Standard Specification for Welded Brass Tube

    B588 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

    B589 Standard Specification for Refined Palladium

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B593 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

    B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

    B595 Standard Specification for Sintered Aluminum Structural Parts

    B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material

    B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

    B601 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

    B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

    B603 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

    B604 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B607 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

    B611 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials

    B613 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

    B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

    B615 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

    B616 Standard Specification for Refined Rhodium

    B617 Standard Specification for Coin Silver Electrical Contact Alloy

    B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B628 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy

    B629 Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

    B630 Standard Practice for Preparation of Chromium for Electroplating with Chromium

    B631 Standard Specification for Silver-Tungsten Electrical Contact Materials

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B634 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

    B635 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

    B636 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B644 Standard Specification for Copper Alloy Addition Agents

    B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

    B646 Standard Practice for Fracture Toughness Testing of Aluminum Alloys

    B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots

    B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

    B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

    B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire

    B657 Guide for Metallographic Identification of Microstructure in Cemented Carbides

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B661 Standard Practice for Heat Treatment of Magnesium Alloys

    B662 Standard Specification for Silver-Molybdenum Electrical Contact Material

    B663 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material

    B664 Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

    B665 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

    B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products

    B667 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

    B668 Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube

    B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

    B671 Standard Specification for Refined Iridium

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B675 Standard Specification for UNS N08367 Welded Pipe

    B676 Standard Specification for UNS N08367 Welded Tube

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B678 Standard Test Method for Solderability of Metallic-Coated Products

    B679 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B682 Standard Specification for Standard Metric Sizes of Electrical Conductors

    B683 Standard Specification for Pure Palladium Electrical Contact Material

    B684 Standard Specification for Platinum-Iridium Electrical Contact Materials

    B685 Standard Specification for Palladium-Copper Electrical Contact Material

    B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B692 Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material

    B693 Standard Specification for Silver-Nickel Electrical Contact Materials

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B696 Standard Specification for Coatings of Cadmium Mechanically Deposited

    B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

    B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

    B699 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

    B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

    B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

    B702 Standard Specification for Copper-Tungsten Electrical Contact Material

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

    B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip

    B710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

    B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

    B712 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials

    B717 Standard Specification for Refined Ruthenium

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

    B723 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

    B727 Standard Practice for Preparation of Plastics Materials for Electroplating

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

    B731 Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

    B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

    B734 Standard Specification for Electrodeposited Copper for Engineering Uses

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B736 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

    B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

    B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

    B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B742 Standard Specification for Fine Silver Electrical Contact Fabricated Material

    B743 Standard Specification for Seamless Copper Tube in Coils

    B744/B744M Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

    B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

    B746/B746M Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B748 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B753 Standard Specification for Thermostat Component Alloys

    B754 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

    B760 Standard Specification for Tungsten Plate, Sheet, and Foil

    B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

    B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

    B763/B763M Standard Specification for Copper Alloy Sand Castings for Valve Applications

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B767 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B769 Standard Test Method for Shear Testing of Aluminum Alloys

    B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

    B771 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

    B772 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

    B774 Standard Specification for Low Melting Point Alloys

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

    B777 Standard Specification for Tungsten Base, High-Density Metal

    B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

    B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

    B780 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

    B781 Standard Guide for Silver-Cadmium Oxide Contact Material

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B784 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

    B786/B786M Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

    B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

    B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

    B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

    B790/B790M Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

    B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

    B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

    B794 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements

    B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B796 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications

    B797 Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts

    B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

    B799 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

    B806 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

    B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

    B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B816 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

    B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

    B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B830 Standard Specification for Uniform Test Methods and Frequency

    B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

    B832 Standard Guide for Electroforming with Nickel and Copper

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

    B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B839 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method

    B840 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

    B841 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

    B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B844 Standard Guide for Silver-Tin Oxide Contact Material

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B846 Standard Terminology for Copper and Copper Alloys

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

    B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

    B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

    B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B854 Standard Guide for Measuring Electrical Contact Intermittences

    B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

    B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

    B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B864/B864M Standard Specification for Corrugated Aluminum Box Culverts

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B867 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

    B868 Standard Practice for Contact Performance Classification of Electrical Connection Systems

    B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B871 Standard Test Method for Tear Testing of Aluminum Alloy Products

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B874 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

    B875 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

    B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B878 Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

    B879 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

    B880 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

    B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

    B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

    B885 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B890 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

    B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

    B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

    B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B896 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

    B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot

    B898 Standard Specification for Reactive and Refractory Metal Clad Plate

    B899 Standard Terminology Relating to Non-ferrous Metals and Alloys

    B900 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B902/B902M Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B904 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

    B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

    B908 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

    B909 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

    B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire

    B911/B911M Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B913 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

    B914 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

    B915 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

    B916 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

    B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

    B918/B918M Standard Practice for Heat Treatment of Wrought Aluminum Alloys

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

    B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

    B924 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B926 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

    B927/B927M Standard Specification for Brass Rod, Bar, and Shapes

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B930 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

    B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

    B932 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip

    B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

    B935 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

    B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials

    B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    B941 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

    B942 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

    B943 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers

    B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products

    B947 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate

    B949 Standard Specification for General Requirements for Zinc and Zinc Alloy Products

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

    B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

    B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

    B954 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry

    B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

    B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application

    B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    B965 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

    B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes

    B970 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts

    B971 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

    B972 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application

    B973 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    B976 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)

    B977 Standard Specification for Titanium and Titanium Ingots

    B978/B978M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)

    B979 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors

    B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes

    B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

    B984 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use

    B985 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

    B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    B989 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings

    C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)

    C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

    C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C286 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

    C346 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials

    C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C375 Standard Classification of Water Used in Milling of Porcelain Enamel

    C385 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

    C448 Standard Test Methods for Abrasion Resistance of Porcelain Enamels

    C536 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

    C537 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

    C538 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

    C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C614 Standard Test Method for Alkali Resistance of Porcelain Enamels

    C632 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

    C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

    C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling

    C664 Standard Test Methods for Thickness of Diffusion Coating

    C694 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution

    C703 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

    C715 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis

    C743 Standard Test Method for Continuity of Porcelain Enamel Coatings

    C756 Standard Test Method for Cleanability of Surface Finishes

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C810 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry

    C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

    C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces

    C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

    C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1541 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

    C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1731 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting

    D1732 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

    E3 Standard Guide for Preparation of Metallographic Specimens

    E4 Standard Practices for Force Verification of Testing Machines

    E6 Standard Terminology Relating to Methods of Mechanical Testing

    E7 Standard Terminology Relating to Metallography

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

    E10 Standard Test Method for Brinell Hardness of Metallic Materials

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

    E32 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

    E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E45 Standard Test Methods for Determining the Inclusion Content of Steel

    E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E81 Standard Test Method for Preparing Quantitative Pole Figures

    E82/E82M Standard Test Method for Determining the Orientation of a Metal Crystal

    E83 Standard Practice for Verification and Classification of Extensometer Systems

    E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

    E94 Standard Guide for Radiographic Examination

    E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

    E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E112 Standard Test Methods for Determining Average Grain Size

    E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E125 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

    E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

    E131 Standard Terminology Relating to Molecular Spectroscopy

    E132 Standard Test Method for Poisson's Ratio at Room Temperature

    E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E143 Standard Test Method for Shear Modulus at Room Temperature

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E168 Standard Practices for General Techniques of Infrared Quantitative Analysis

    E169 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

    E175 Standard Terminology of Microscopy

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E190 Standard Test Method for Guided Bend Test for Ductility of Welds

    E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

    E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

    E208 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

    E209 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

    E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube

    E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

    E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

    E243 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

    E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

    E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement

    E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

    E260 Standard Practice for Packed Column Gas Chromatography

    E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

    E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E275 Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

    E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

    E290 Standard Test Methods for Bend Testing of Material for Ductility

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E310 Standard Reference Radiographs for Tin Bronze Castings

    E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

    E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

    E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E322 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E334 Standard Practice for General Techniques of Infrared Microanalysis

    E340 Standard Test Method for Macroetching Metals and Alloys

    E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E355 Standard Practice for Gas Chromatography Terms and Relationships

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

    E381 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

    E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

    E384 Standard Test Method for Knoop and Vickers Hardness of Materials

    E386 Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy

    E387 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E388 Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E390 Standard Reference Radiographs for Steel Fusion Welds

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

    E407 Standard Practice for Microetching Metals and Alloys

    E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

    E426 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

    E432 Standard Guide for Selection of a Leak Testing Method

    E433 Standard Reference Photographs for Liquid Penetrant Inspection

    E436 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    E448 Standard Practice for Scleroscope Hardness Testing of Metallic Materials

    E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

    E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

    E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

    E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

    E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

    E494 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

    E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

    E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

    E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

    E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

    E515 Standard Practice for Leaks Using Bubble Emission Techniques

    E516 Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

    E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

    E543 Standard Specification for Agencies Performing Nondestructive Testing

    E545 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

    E561 Standard Test Method for K-R Curve Determination

    E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

    E566 Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals

    E569/E569M Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E570 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

    E571 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E573 Standard Practices for Internal Reflection Spectroscopy

    E578 Standard Test Method for Linearity of Fluorescence Measuring Systems

    E579 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E588 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

    E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

    E594 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

    E604 Standard Test Method for Dynamic Tear Testing of Metallic Materials

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E618 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

    E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

    E634 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry

    E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates

    E650/E650M Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

    E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E682 Standard Practice for Liquid Chromatography Terms and Relationships

    E685 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

    E689 Standard Reference Radiographs for Ductile Iron Castings

    E690 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

    E697 Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography

    E703 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

    E709 Standard Guide for Magnetic Particle Testing

    E716 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis

    E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

    E739 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

    E740/E740M Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

    E746 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E748 Standard Practices for Thermal Neutron Radiography of Materials

    E749/E749M Standard Practice for Acoustic Emission Monitoring During Continuous Welding

    E750 Standard Practice for Characterizing Acoustic Emission Instrumentation

    E751/E751M Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

    E766 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

    E768 Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

    E797/E797M Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

    E801 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

    E802 Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness

    E803 Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams

    E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry

    E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

    E827 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy

    E837 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

    E840 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography

    E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

    E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

    E877 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

    E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

    E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

    E883 Standard Guide for Reflected–Light Photomicrography

    E908 Standard Practice for Calibrating Gaseous Reference Leaks

    E915 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

    E925 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

    E930 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

    E932 Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers

    E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry

    E958 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

    E963 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte

    E975 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

    E976 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

    E977 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials

    E983 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy

    E984 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy

    E986 Standard Practice for Scanning Electron Microscope Beam Size Characterization

    E995 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy

    E996 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

    E999 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

    E1000 Standard Guide for Radioscopy

    E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1002 Standard Practice for Leaks Using Ultrasonics

    E1003 Standard Practice for Hydrostatic Leak Testing

    E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

    E1009 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

    E1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

    E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

    E1016 Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers

    E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1030 Standard Test Method for Radiographic Examination of Metallic Castings

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1033 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

    E1049 Standard Practices for Cycle Counting in Fatigue Analysis

    E1065/E1065M Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

    E1066/E1066M Standard Practice for Ammonia Colorimetric LeakTesting

    E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

    E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

    E1077 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

    E1078 Standard Guide for Specimen Preparation and Mounting in Surface Analysis

    E1079 Standard Practice for Calibration of Transmission Densitometers

    E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1086 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

    E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

    E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

    E1118/E1118M Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

    E1127 Standard Guide for Depth Profiling in Auger Electron Spectroscopy

    E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

    E1139/E1139M Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

    E1140 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography

    E1151 Standard Practice for Ion Chromatography Terms and Relationships

    E1158 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

    E1161 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

    E1162 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)

    E1165 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

    E1172 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

    E1180 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

    E1181 Standard Test Methods for Characterizing Duplex Grain Sizes

    E1184 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

    E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

    E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

    E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

    E1211/E1211M Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

    E1212 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

    E1213 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

    E1217 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers

    E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

    E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

    E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

    E1237 Standard Guide for Installing Bonded Resistance Strain Gages

    E1245 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

    E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

    E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

    E1254 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

    E1255 Standard Practice for Radioscopy

    E1257 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

    E1268 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

    E1277 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

    E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1303 Practice for Refractive Index Detectors Used in Liquid Chromatography

    E1304 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

    E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

    E1311 Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

    E1312 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

    E1316 Standard Terminology for Nondestructive Examinations

    E1319 Standard Guide for High-Temperature Static Strain Measurement

    E1320 Standard Reference Radiographs for Titanium Castings

    E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

    E1338 Guide for Identification of Metals and Alloys in Computerized Material Property Databases

    E1351 Standard Practice for Production and Evaluation of Field Metallographic Replicas

    E1359 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies

    E1361 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

    E1382 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

    E1390 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

    E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

    E1411 Standard Practice for Qualification of Radioscopic Systems

    E1416 Standard Test Method for Radioscopic Examination of Weldments

    E1417/E1417M Standard Practice for Liquid Penetrant Testing

    E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

    E1419 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

    E1421 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests

    E1426 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress

    E1438 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS

    E1441 Standard Guide for Computed Tomography (CT) Imaging

    E1444/E1444M Standard Practice for Magnetic Particle Testing

    E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

    E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

    E1449 Standard Guide for Supercritical Fluid Chromatography Terms and Relationships

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1453 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

    E1457 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals

    E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

    E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

    E1476 Standard Guide for Metals Identification, Grade Verification, and Sorting

    E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

    E1495/E1495M Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

    E1504 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)

    E1508 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

    E1510 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs

    E1511 Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography

    E1523 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy

    E1543 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems

    E1552 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry

    E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens

    E1561 Standard Practice for Analysis of Strain Gage Rosette Data

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

    E1570 Standard Practice for Computed Tomographic (CT) Examination

    E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

    E1577 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis

    E1578 Standard Guide for Laboratory Informatics

    E1587 Standard Test Methods for Chemical Analysis of Refined Nickel

    E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry

    E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

    E1603/E1603M Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

    E1606 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

    E1614 Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems

    E1621 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E1629 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

    E1634 Standard Guide for Performing Sputter Crater Depth Measurements

    E1635 Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)

    E1636 Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function

    E1642 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis

    E1647 Standard Practice for Determining Contrast Sensitivity in Radioscopy

    E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

    E1653 Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

    E1654 Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy

    E1655 Standard Practices for Infrared Multivariate Quantitative Analysis

    E1657 Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography

    E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

    E1672 Standard Guide for Computed Tomography (CT) System Selection

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E1683 Standard Practice for Testing the Performance of Scanning Raman Spectrometers

    E1685 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

    E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

    E1698 Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography

    E1734 Standard Practice for Radioscopic Examination of Castings

    E1735 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

    E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

    E1742/E1742M Standard Practice for Radiographic Examination

    E1747 Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications

    E1763 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods

    E1770 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1774 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

    E1781/E1781M Standard Practice for Secondary Calibration of Acoustic Emission Sensors

    E1790 Standard Practice for Near Infrared Qualitative Analysis

    E1791 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

    E1813 Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy

    E1814 Standard Practice for Computed Tomographic (CT) Examination of Castings

    E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography

    E1816 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E1817 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

    E1820 Standard Test Method for Measurement of Fracture Toughness

    E1823 Standard Terminology Relating to Fatigue and Fracture Testing

    E1829 Standard Guide for Handling Specimens Prior to Surface Analysis

    E1832 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

    E1833 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

    E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

    E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

    E1840 Standard Guide for Raman Shift Standards for Spectrometer Calibration

    E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

    E1856 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

    E1862 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

    E1865 Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

    E1866 Standard Guide for Establishing Spectrophotometer Performance Tests

    E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

    E1876 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

    E1880 Standard Practice for Tissue Cryosection Analysis with SIMS

    E1881 Standard Guide for Cell Culture Analysis with SIMS

    E1888/E1888M Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

    E1897 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

    E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

    E1901 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

    E1916 Standard Guide for Identification of Mixed Lots of Metals

    E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

    E1920 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings

    E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

    E1922 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

    E1928 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

    E1930/E1930M Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

    E1931 Standard Guide for X-Ray Compton Scatter Tomography

    E1932 Standard Guide for Acoustic Emission Examination of Small Parts

    E1933 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

    E1934 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

    E1935 Standard Test Method for Calibrating and Measuring CT Density

    E1936 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

    E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

    E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

    E1942 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

    E1944 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

    E1947 Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data

    E1948 Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data

    E1949 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E1951 Standard Guide for Calibrating Reticles and Light Microscope Magnifications

    E1955 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs

    E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

    E1962 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E1982 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

    E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

    E2001 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E2002 Standard Practice for Determining Total Image Unsharpness in Radiology

    E2003 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators

    E2007 Standard Guide for Computed Radiography

    E2014 Standard Guide on Metallographic Laboratory Safety

    E2015 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

    E2023 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

    E2024/E2024M Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

    E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

    E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)

    E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

    E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

    E2066 Standard Guide for Validation of Laboratory Information Management Systems

    E2075/E2075M Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

    E2076/E2076M Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

    E2077 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data

    E2078 Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data

    E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    E2096/E2096M Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

    E2104 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

    E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)

    E2106 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses

    E2108 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer

    E2109 Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

    E2142 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

    E2143 Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons

    E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

    E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics

    E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

    E2208 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

    E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

    E2218 Standard Test Method for Determining Forming Limit Curves

    E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

    E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

    E2244 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2245 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2246 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

    E2261/E2261M Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

    E2283 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

    E2293 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

    E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

    E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

    E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

    E2297 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

    E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

    E2309/E2309M Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

    E2310 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy

    E2337/E2337M Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

    E2338 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards

    E2339 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

    E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

    E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

    E2373/E2373M Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

    E2374 Standard Guide for Acoustic Emission System Performance Verification

    E2375 Standard Practice for Ultrasonic Testing of Wrought Products

    E2382 Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy

    E2422 Standard Digital Reference Images for Inspection of Aluminum Castings

    E2426 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS

    E2428 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines

    E2443 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets

    E2444 Terminology Relating to Measurements Taken on Thin, Reflecting Films

    E2445 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems

    E2446 Standard Practice for Classification of Computed Radiology Systems

    E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

    E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E2472 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

    E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

    E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

    E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2492 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test

    E2529 Standard Guide for Testing the Resolution of a Raman Spectrometer

    E2530 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps

    E2533 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

    E2534 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2546 Standard Practice for Instrumented Indentation Testing

    E2567 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis

    E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys

    E2580 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2581 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications

    E2582 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

    E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)

    E2597/E2597M Standard Practice for Manufacturing Characterization of Digital Detector Arrays

    E2598/E2598M Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

    E2617 Standard Practice for Validation of Empirically Derived Multivariate Calibrations

    E2624 Standard Practice for Torque Calibration of Testing Machines and Devices

    E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

    E2627 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

    E2642 Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors

    E2658 Standard Practices for Verification of Speed for Material Testing Machines

    E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

    E2661/E2661M Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

    E2662 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2663 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

    E2669 Standard Digital Reference Images for Titanium Castings

    E2695 Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy

    E2698 Standard Practice for Radiological Examination Using Digital Detector Arrays

    E2699 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

    E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

    E2712 Standard Test Methods for Forming Superplastic Metallic Sheet

    E2714 Standard Test Method for Creep-Fatigue Testing

    E2719 Standard Guide for Fluorescence—Instrument Calibration and Qualification

    E2734/E2734M Standard Specification for Dimensions of Knife-Edge Flanges

    E2735 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments

    E2736 Standard Guide for Digital Detector Array Radiology

    E2737 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

    E2738 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

    E2760 Standard Test Method for Creep-Fatigue Crack Growth Testing

    E2767 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

    E2775 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

    E2789 Standard Guide for Fretting Fatigue Testing

    E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

    E2818 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

    E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)

    E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

    E2857 Standard Guide for Validating Analytical Methods

    E2860 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels

    E2861 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

    E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

    E2863 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

    E2868 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

    E2869 Standard Digital Reference Images for Magnesium Castings

    E2884 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

    E2899 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending

    E2903 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

    E2904 Standard Practice for Characterization and Verification of Phased Array Probes

    E2905/E2905M Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

    E2906/E2906M Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

    E2907/E2907M Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

    E2911 Standard Guide for Relative Intensity Correction of Raman Spectrometers

    E2928/E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

    E2929 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

    E2930 Standard Practice for Pressure Decay Leak Test Method

    E2934 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

    E2941 Standard Practice for Nitric Acid-Extraction of Elements from Ores and Related Metallurgical Materials by Closed Vessel Microwave Heating

    E2948 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

    E2971 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements

    E2977 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

    F432 Standard Specification for Roof and Rock Bolts and Accessories

    F436 Standard Specification for Hardened Steel Washers

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F467M Standard Specification for Nonferrous Nuts for General Use (Metric)

    F467 Standard Specification for Nonferrous Nuts for General Use

    F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

    F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F537 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

    F541 Standard Specification for Alloy Steel Eyebolts

    F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F552 Standard Terminology Relating to Chain Link Fencing

    F567 Standard Practice for Installation of Chain-Link Fence

    F592 Standard Terminology of Collated and Cohered Fasteners and Their Application Tools

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

    F626 Standard Specification for Fence Fittings

    F654 Standard Specification for Residential Chain Link Fence Gates

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F670 Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

    F680 Standard Test Methods for Nails

    F681 Standard Practice for Use of Branch Connections

    F682 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

    F683 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

    F704 Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints

    F707/F707M Standard Specification for Modular Gage Boards

    F708 Standard Practice for Design and Installation of Rigid Pipe Hangers

    F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

    F721 Standard Specification for Gage Piping Assemblies

    F722 Standard Specification for Welded Joints for Shipboard Piping Systems

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F765 Standard Specification for Wildcats, Ship Anchor Chain

    F782 Standard Specification for Doors, Furniture, Marine

    F783 Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

    F788 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

    F812 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

    F821/F821M Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

    F822 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

    F823 Standard Specification for Desk, Log, Marine, Steel, with Cabinet

    F824 Standard Specification for Tables, Mess, Marine, Steel

    F825 Standard Specification for Drawers, Furniture, Marine, Steel

    F826 Standard Specification for Tops, Furniture, Marine, Steel

    F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F837 Standard Specification for Stainless Steel Socket Head Cap Screws

    F841 Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F856 Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)

    F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F880M Standard Specification for Stainless Steel Socket Set Screws (Metric)

    F880 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F885 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2

    F900 Standard Specification for Industrial and Commercial Swing Gates

    F901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts

    F906 Standard Specification for Letters and Numerals for Ships

    F912 Standard Specification for Alloy Steel Socket Set Screws

    F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

    F940 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

    F941 Standard Practice for Inspection of Marine Surface Preparation and Coating Application

    F956 Standard Specification for Bell, Cast, Sound Signalling

    F957 Standard Specification for Gong, Sound Signaling

    F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

    F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

    F969 Standard Practice for Construction of Chain-Link Tennis Court Fence

    F985 Standard Specification for Panama Canal Pilot Platform

    F986 Standard Specification for Suction Strainer Boxes

    F987 Standard Specification for Portable Intermediate Flush Deck Stanchion

    F992 Standard Specification for Valve Label Plates

    F993 Standard Specification for Valve Locking Devices

    F994 Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

    F998 Standard Specification for Centrifugal Pump, Shipboard Use

    F1000 Standard Practice for Piping System Drawing Symbols

    F1003 Standard Specification for Searchlights on Motor Lifeboats

    F1005 Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

    F1006 Standard Specification for Entrainment Separators for Use in Marine Piping Applications

    F1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

    F1014 Standard Specification for Flashlights on Vessels

    F1018 Standard Specification for Steel Emergency Gear Stowage Locker

    F1019M Standard Specification for Steel Deck Gear Stowage Box [Metric]

    F1020 Standard Specification for Line-Blind Valves for Marine Applications

    F1030 Standard Practice for Selection of Valve Operators

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1068 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

    F1069 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

    F1070 Standard Specification for Doors, Non-Tight, for Marine Use

    F1071 Standard Specification for Expanded-Metal Bulkhead Panels

    F1072 Standard Specification for Expanded-Metal Doors

    F1073 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

    F1074 Standard Specification for Cleats, Welded Horn Type

    F1075 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

    F1076 Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1085 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

    F1092 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

    F1097 Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

    F1098 Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24

    F1099M Standard Specification for Rat Guards, Ship's (Metric)

    F1106 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

    F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

    F1121 Standard Specification for International Shore Connections for Marine Fire Applications

    F1122 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

    F1123 Standard Specification for Non-Metallic Expansion Joints

    F1130 Standard Practice for Inspecting the Coating System of a Ship

    F1134 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1138 Standard Specification for Spray Shields for Mechanical Joints

    F1139 Standard Specification for Steam Traps and Drains

    F1142 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

    F1143 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

    F1144 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

    F1145 Standard Specification for Turnbuckles, Swaged, Welded, Forged

    F1155 Standard Practice for Selection and Application of Piping System Materials

    F1166 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

    F1172 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

    F1173 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

    F1178 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

    F1179 Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1196 Standard Specification for Sliding Watertight Door Assemblies

    F1197 Standard Specification for Sliding Watertight Door Control Systems

    F1198 Standard Guide for Shipboard Fire Detection Systems

    F1199 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)

    F1200 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

    F1201 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

    F1207M Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]

    F1244 Standard Specification for Berths, Marine

    F1245 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

    F1267 Standard Specification for Metal, Expanded, Steel

    F1270 Standard Practice for Preparing and Locating Emergency Muster Lists

    F1271 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

    F1273 Standard Specification for Tank Vent Flame Arresters

    F1297 Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

    F1298 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

    F1309 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

    F1311 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

    F1312 Standard Specification for Brick, Insulating, High Temperature, Fire Clay

    F1321 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

    F1322 Standard Guide for Selection of Shipboard Incinerators

    F1323 Standard Specification for Shipboard Incinerators

    F1330 Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

    F1331 Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

    F1332 Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)

    F1333 Standard Specification for Construction of Fire and Foam Station Cabinets

    F1337 Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities

    F1338 Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1347 Standard Specification for Manually Operated Fueling Hose Reels

    F1348/F1348M Standard Specification for Pneumatic Rotary Descaling Machines

    F1370 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard

    F1379 Standard Terminology Relating to Barbed Tape

    F1385 Standard Practice for Platforms in Cargo Tanks

    F1386 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

    F1387 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

    F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1431 Standard Specification for Water Trap for Diesel Exhaust

    F1433 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner

    F1455 Standard Guide for Selection of Structural Details for Ship Construction

    F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

    F1470 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

    F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1503 Standard Practice for Machine/Process Capability Study Procedure

    F1507 Standard Specification for Surge Suppressors for Shipboard Use

    F1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

    F1510 Standard Specification for Rotary Positive Displacement Pumps, Ships Use

    F1511 Standard Specification for Mechanical Seals for Shipboard Pump Applications

    F1546M Standard Specification for Fire Hose Nozzles

    F1546 Standard Specification for Fire Hose Nozzles

    F1547 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding

    F1548 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

    F1553 Standard Guide for Specifying Chain Link Fence

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1565 Standard Specification for Pressure-Reducing Valves for Steam Service

    F1567 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

    F1575 Standard Test Method for Determining Bending Yield Moment of Nails

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1669M Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

    F1685 Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

    F1712 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications

    F1716 Standard Guide for Transition and Performance of Marine Software Systems Maintenance

    F1718 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

    F1755M Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]

    F1756 Standard Guide for Implementation of a Fleet Management System Network

    F1757 Standard Guide for Digital Communication Protocols for Computerized Systems

    F1789 Standard Terminology for F16 Mechanical Fasteners

    F1791 Standard Specification for Filters Used in Air or Nitrogen Systems

    F1792 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

    F1793 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

    F1794 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

    F1795 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

    F1799 Standard Guide for Shipboard Generated Waste Management Audits

    F1808 Standard Guide for Weight Control Technical Requirements for Surface Ships

    F1835 Standard Guide for Cable Splicing Installations

    F1836M Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

    F1837M Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F1878 Standard Guide for Escort Vessel Evaluation and Selection

    F1883 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

    F1908 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F1911 Standard Practice for Installation of Barbed Tape

    F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1985 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves

    F1994 Standard Test Method for Shipboard Fixed Foam Firefighting Systems

    F1999 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

    F2000 Standard Guide for Fences for Baseball and Softball Fields

    F2001 Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

    F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    F2015 Standard Specification for Lap Joint Flange Pipe End Applications

    F2016 Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

    F2017 Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

    F2039 Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program

    F2044 Standard Specification for Liquid Level Indicating Equipment, Electrical

    F2045 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

    F2046 Standard Specification for Tachometers, Various

    F2049 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

    F2070 Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic

    F2071 Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

    F2087 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick

    F2094/F2094M Standard Specification for Silicon Nitride Bearing Balls

    F2154 Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

    F2161 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils

    F2162 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

    F2163 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

    F2168 Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

    F2191/F2191M Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn

    F2192 Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

    F2200 Standard Specification for Automated Vehicular Gate Construction

    F2215 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

    F2218 Standard Guide for Hardware Implementation for Computerized Systems

    F2246 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

    F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2283 Standard Specification for Shipboard Oil Pollution Abatement System

    F2328 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

    F2328M Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)

    F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2332 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

    F2361 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower

    F2362 Standard Specification for Temperature Monitoring Equipment

    F2363/F2363M Standard Specification for Sewage and Graywater Flow Through Treatment Systems

    F2403 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength

    F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2409 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F2430 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

    F2431 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

    F2437 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

    F2443 Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End

    F2444 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques

    F2446 Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

    F2453/F2453M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2? [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

    F2482 Standard Specification for Load-Indicating Externally Threaded Fasteners

    F2488 Standard Terminology for Rolling Element Bearings

    F2489 Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases

    F2511 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

    F2548 Standard Specification for Expanded Metal Fence Systems for Security Purposes

    F2589 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

    F2590 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

    F2591 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)

    F2611 Standard Guide for Design and Construction of Chain Link Security Fencing

    F2630 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates

    F2631 Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities

    F2660 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

    F2661 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer

    F2688 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

    F2698 Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities

    F2699 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas

    F2730/F2730M Standard Specification for Silicon Nitride Cylindrical Bearing Rollers

    F2780 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers

    F2781 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

    F2798 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

    F2814 Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

    F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F2833 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F2876 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications

    F2877/F2877M Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

    F2882 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength

    F2882M Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]

    F2919/F2919M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels

    F2934 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications

    F2935 Standard Specification for Chocks, Panama, Mooring Cast Steel

    F2936 Standard Specification for Chocks, Ship Mooring, Cast Steel

    F2953 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    F2957 Standard Specification for Ornamental Aluminum Fence Systems

    F2991 Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures

    F3000/F3000M Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

    F3040/F3040M Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

    F3042 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws

    F3052 Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

    G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

    G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)

    G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

    G4 Standard Guide for Conducting Corrosion Tests in Field Applications

    G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

    G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data

    G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

    G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

    G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

    G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

    G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

    G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

    G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

    G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

    G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

    G40 Standard Terminology Relating to Wear and Erosion

    G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

    G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution

    G46 Standard Guide for Examination and Evaluation of Pitting Corrosion

    G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

    G48 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

    G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

    G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

    G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

    G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

    G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials

    G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

    G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

    G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

    G60 Standard Practice for Conducting Cyclic Humidity Exposures

    G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

    G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

    G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

    G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

    G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

    G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

    G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

    G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

    G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)

    G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

    G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

    G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

    G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test

    G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

    G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

    G85 Standard Practice for Modified Salt Spray (Fog) Testing

    G87 Standard Practice for Conducting Moist SO2 Tests

    G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

    G92 Standard Practice for Characterization of Atmospheric Test Sites

    G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)

    G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

    G98 Standard Test Method for Galling Resistance of Materials

    G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

    G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

    G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

    G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

    G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution

    G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

    G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

    G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

    G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

    G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

    G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

    G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

    G115 Standard Guide for Measuring and Reporting Friction Coefficients

    G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

    G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests

    G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases

    G119 Standard Guide for Determining Synergism Between Wear and Corrosion

    G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

    G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

    G132 Standard Test Method for Pin Abrasion Testing

    G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

    G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet

    G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals

    G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

    G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

    G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics

    G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

    G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

    G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

    G157 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

    G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks

    G161 Standard Guide for Corrosion-Related Failure Analysis

    G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils

    G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements

    G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs

    G165 Standard Practice for Determining Rail-to-Earth Resistance

    G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

    G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

    G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

    G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

    G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method

    G180 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

    G181 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

    G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings

    G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

    G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

    G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

    G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

    G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

    G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

    G190 Standard Guide for Developing and Selecting Wear Tests

    G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

    G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane

    G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

    G196 Standard Test Method for Galling Resistance of Material Couples

    G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

    G199 Standard Guide for Electrochemical Noise Measurement

    G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

    G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage

    G203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems

    G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

    G205 Standard Guide for Determining Corrosivity of Crude Oils

    G206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests

    G208 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus

    G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys

    G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus

    G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets

    NACE/ASTMG31 Standard Guide for Laboratory Immersion Corrosion Testing of Metals

    NACE/ASTMG193 Standard Terminology and Acronyms Relating to Corrosion

    2,300+ ASTM metals standards from Sections 1, 2, and 3 of the Annual Book of ASTM Standards (includes ferrous, nonferrous, NDT, corrosion, fasteners, piping, and sheet). Available as a one-time collection, collection with quarterly updates, or LAN version with quarterly updates.