ASTM Standards Source (Online):
    Building Codes/Construction Collection


    TABLE OF CONTENTS

    (Standards will be added, revised or withdrawn on an ongoing basis.)

    A1 Standard Specification for Carbon Steel Tee Rails

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A36/A36M Standard Specification for Carbon Structural Steel

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A74 Standard Specification for Cast Iron Soil Pipe and Fittings

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A131/A131M Standard Specification for Structural Steel for Ships

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A197/A197M Standard Specification for Cupola Malleable Iron

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

    A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A328/A328M Standard Specification for Steel Sheet Piling

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A342/A342M Standard Test Methods for Permeability of Feebly Magnetic Materials

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A413/A413M Standard Specification for Carbon Steel Chain

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A466/A466M Standard Specification for Weldless Chain

    A467/A467M Standard Specification for Machine and Coil Chain

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A492 Standard Specification for Stainless Steel Rope Wire

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A536 Standard Specification for Ductile Iron Castings

    A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A580/A580M Standard Specification for Stainless Steel Wire

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

    A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

    A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A716 Standard Specification for Ductile Iron Culvert Pipe

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A746 Standard Specification for Ductile Iron Gravity Sewer Pipe

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A759 Standard Specification for Carbon Steel Crane Rails

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A861 Standard Specification for High-Silicon Iron Pipe and Fittings

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process

    A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A899 Standard Specification for Steel Wire, Epoxy-Coated

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A992/A992M Standard Specification for Structural Steel Shapes

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    B1 Standard Specification for Hard-Drawn Copper Wire

    B2 Standard Specification for Medium-Hard-Drawn Copper Wire

    B3 Standard Specification for Soft or Annealed Copper Wire

    B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B29 Standard Specification for Refined Lead

    B30 Standard Specification for Copper Alloys in Ingot Form

    B32 Standard Specification for Solder Metal

    B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B69 Standard Specification for Rolled Zinc

    B75/B75M Standard Specification for Seamless Copper Tube

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B88 Standard Specification for Seamless Copper Water Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B134/B134M Standard Specification for Brass Wire

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B160 Standard Specification for Nickel Rod and Bar

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

    B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

    B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

    B176 Standard Specification for Copper-Alloy Die Castings

    B177/B177M Standard Guide for Engineering Chromium Electroplating

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

    B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B447 Standard Specification for Welded Copper Tube

    B449 Standard Specification for Chromates on Aluminum

    B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications

    B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B564 Standard Specification for Nickel Alloy Forgings

    B566 Standard Specification for Copper-Clad Aluminum Wire

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B587 Standard Specification for Welded Brass Tube

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

    B743 Standard Specification for Seamless Copper Tube in Coils

    B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

    B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B902/B902M Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

    C5 Standard Specification for Quicklime for Structural Purposes

    C10/C10M Standard Specification for Natural Cement

    C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

    C12 Standard Practice for Installing Vitrified Clay Pipe Lines

    C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

    C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

    C22/C22M Standard Specification for Gypsum

    C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

    C27 Standard Classification of Fireclay and High-Alumina Refractory Brick

    C28/C28M Standard Specification for Gypsum Plasters

    C29/C29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

    C33/C33M Standard Specification for Concrete Aggregates

    C34 Standard Specification for Structural Clay Load-Bearing Wall Tile

    C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

    C51 Standard Terminology Relating to Lime and Limestone (as used by the Industry)

    C55 Standard Specification for Concrete Building Brick

    C56 Standard Specification for Structural Clay Nonloadbearing Tile

    C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

    C61/C61M Standard Specification for Gypsum Keene's Cement

    C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

    C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

    C70 Standard Test Method for Surface Moisture in Fine Aggregate

    C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

    C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

    C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

    C90 Standard Specification for Loadbearing Concrete Masonry Units

    C91/C91M Standard Specification for Masonry Cement

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone

    C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C115/C115M Standard Test Method for Fineness of Portland Cement by the Turbidimeter

    C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

    C118 Standard Specification for Concrete Pipe for Irrigation or Drainage

    C118M Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)

    C119 Standard Terminology Relating to Dimension Stone

    C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C121/C121M Standard Test Method for Water Absorption of Slate

    C123/C123M Standard Test Method for Lightweight Particles in Aggregate

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

    C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C129 Standard Specification for Nonloadbearing Concrete Masonry Units

    C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

    C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

    C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

    C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C144 Standard Specification for Aggregate for Masonry Mortar

    C150/C150M Standard Specification for Portland Cement

    C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement

    C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C159 Standard Specification for Vitrified Clay Filter Blocks

    C163 Standard Practice for Mixing Thermal Insulating Cement Samples

    C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

    C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

    C168 Standard Terminology Relating to Thermal Insulation

    C170/C170M Standard Test Method for Compressive Strength of Dimension Stone

    C171 Standard Specification for Sheet Materials for Curing Concrete

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

    C186 Standard Test Method for Heat of Hydration of Hydraulic Cement

    C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

    C188 Standard Test Method for Density of Hydraulic Cement

    C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C199 Standard Test Method for Pier Test for Refractory Mortars

    C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

    C206 Standard Specification for Finishing Hydrated Lime

    C207 Standard Specification for Hydrated Lime for Masonry Purposes

    C208 Standard Specification for Cellulosic Fiber Insulating Board

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C212 Standard Specification for Structural Clay Facing Tile

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

    C217/C217M Standard Test Method for Weather Resistance of Slate

    C219 Standard Terminology Relating to Hydraulic Cement

    C220 Standard Specification for Flat Asbestos-Cement Sheets

    C221 Standard Specification for Corrugated Asbestos-Cement Sheets

    C222 Standard Specification for Asbestos-Cement Roofing Shingles

    C223 Standard Specification for Asbestos-Cement Siding

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C232/C232M Standard Test Method for Bleeding of Concrete

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C240 Standard Test Methods of Testing Cellular Glass Insulation Block

    C241/C241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C242 Standard Terminology of Ceramic Whitewares and Related Products

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

    C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C270 Standard Specification for Mortar for Unit Masonry

    C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C279 Standard Specification for Chemical-Resistant Masonry Units

    C287 Standard Specification for Chemical-Resistant Sulfur Mortar

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

    C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete

    C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C301 Standard Test Methods for Vitrified Clay Pipe

    C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

    C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

    C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C315 Standard Specification for Clay Flue Liners and Chimney Pots

    C317/C317M Standard Specification for Gypsum Concrete

    C318/C318M Standard Specification for Gypsum Formboard

    C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C341/C341M Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

    C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

    C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

    C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

    C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

    C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

    C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

    C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

    C367/C367M Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

    C373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products

    C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

    C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

    C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

    C395 Standard Specification for Chemical-Resistant Resin Mortars

    C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

    C399 Standard Practice for Use of Chemical-Resistant Resin Mortars

    C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

    C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories

    C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C404 Standard Specification for Aggregates for Masonry Grout

    C406/C406M Standard Specification for Roofing Slate

    C410 Standard Specification for Industrial Floor Brick

    C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

    C412 Standard Specification for Concrete Drain Tile

    C412M Standard Specification for Concrete Drain Tile (Metric)

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C414 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

    C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

    C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C426 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units

    C428/C428M Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

    C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

    C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

    C444M Standard Specification for Perforated Concrete Pipe (Metric)

    C444 Standard Specification for Perforated Concrete Pipe

    C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

    C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

    C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

    C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

    C458/C458M Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

    C459/C459M Standard Test Methods for Asbestos-Cement Flat Products

    C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

    C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

    C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

    C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

    C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

    C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

    C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

    C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

    C476 Standard Specification for Grout for Masonry

    C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

    C478 Standard Specification for Precast Reinforced Concrete Manhole Sections

    C479 Standard Specification for Vitrified Clay Liner Plates

    C481 Standard Test Method for Laboratory Aging of Sandwich Constructions

    C482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

    C485 Standard Test Method for Measuring Warpage of Ceramic Tile

    C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

    C490/C490M Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

    C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

    C499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

    C500/C500M Standard Test Methods for Asbestos-Cement Pipe

    C501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

    C502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile

    C503/C503M Standard Specification for Marble Dimension Stone

    C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

    C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

    C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

    C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

    C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C511 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C512/C512M Standard Test Method for Creep of Concrete in Compression

    C513 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

    C514 Standard Specification for Nails for the Application of Gypsum Board

    C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C520 Standard Test Methods for Density of Granular Loose Fill Insulations

    C522 Standard Test Method for Airflow Resistance of Acoustical Materials

    C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C541/C541M Standard Specification for Linings for Asbestos-Cement Pipe

    C542 Standard Specification for Lock-Strip Gaskets

    C547 Standard Specification for Mineral Fiber Pipe Insulation

    C549 Standard Specification for Perlite Loose Fill Insulation

    C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

    C551/C551M Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C568/C568M Standard Specification for Limestone Dimension Stone

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

    C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

    C587 Standard Specification for Gypsum Veneer Plaster

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

    C597 Standard Test Method for Pulse Velocity Through Concrete

    C602 Standard Specification for Agricultural Liming Materials

    C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C615/C615M Standard Specification for Granite Dimension Stone

    C616/C616M Standard Specification for Quartz-Based Dimension Stone

    C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester

    C629/C629M Standard Specification for Slate Dimension Stone

    C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

    C634 Standard Terminology Relating to Building and Environmental Acoustics

    C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

    C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C638 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete

    C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

    C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

    C645 Standard Specification for Nonstructural Steel Framing Members

    C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

    C648 Standard Test Method for Breaking Strength of Ceramic Tile

    C650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

    C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C654 Standard Specification for Porous Concrete Pipe

    C654M Standard Specification for Porous Concrete Pipe (Metric)

    C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

    C659 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C663 Standard Specification for Asbestos-Cement Storm Drain Pipe

    C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

    C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

    C668 Standard Specification for Asbestos-Cement Transmission Pipe

    C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

    C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C688 Standard Specification for Functional Additions for Use in Hydraulic Cements

    C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

    C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size

    C706 Standard Specification for Limestone for Animal Feed Use

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C717 Standard Terminology of Building Seals and Sealants

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile

    C725 Standard Specification for Semidense Mineral Fiber Siding

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

    C728 Standard Specification for Perlite Thermal Insulation Board

    C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C737 Standard Specification for Limestone for Dusting of Coal Mines

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C740/C740M Standard Guide for Evacuated Reflective Insulation In Cryogenic Service

    C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C746 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading

    C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

    C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C778 Standard Specification for Standard Sand

    C779/C779M Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C782 Standard Test Method for Softness of Preformed Tape Sealants

    C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

    C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

    C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C800 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C803/C803M Standard Test Method for Penetration Resistance of Hardened Concrete

    C805/C805M Standard Test Method for Rebound Number of Hardened Concrete

    C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

    C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

    C821 Standard Specification for Lime for Use with Pozzolans

    C822 Standard Terminology Relating to Concrete Pipe and Related Products

    C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

    C825 Standard Specification for Precast Concrete Barriers

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C828 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines

    C834 Standard Specification for Latex Sealants

    C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

    C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

    C840 Standard Specification for Application and Finishing of Gypsum Board

    C841 Standard Specification for Installation of Interior Lathing and Furring

    C842 Standard Specification for Application of Interior Gypsum Plaster

    C843 Standard Specification for Application of Gypsum Veneer Plaster

    C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

    C845/C845M Standard Specification for Expansive Hydraulic Cement

    C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

    C847 Standard Specification for Metal Lath

    C856 Standard Practice for Petrographic Examination of Hardened Concrete

    C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

    C870 Standard Practice for Conditioning of Thermal Insulating Materials

    C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

    C873/C873M Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C875 Standard Specification for Asbestos-Cement Conduit

    C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

    C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

    C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

    C879 Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C880/C880M Standard Test Method for Flexural Strength of Dimension Stone

    C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C884/C884M Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

    C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

    C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures

    C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

    C896 Standard Terminology Relating to Clay Products

    C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

    C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

    C900 Standard Test Method for Pullout Strength of Hardened Concrete

    C901 Standard Specification for Prefabricated Masonry Panels

    C902 Standard Specification for Pedestrian and Light Traffic Paving Brick

    C904 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

    C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908 Standard Test Method for Yield Strength of Preformed Tape Sealants

    C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

    C913 Standard Specification for Precast Concrete Water and Wastewater Structures

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C916 Standard Specification for Adhesives for Duct Thermal Insulation

    C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

    C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants

    C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C926 Standard Specification for Application of Portland Cement-Based Plaster

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel

    C930 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C933 Standard Specification for Welded Wire Lath

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units

    C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

    C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

    C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C941 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

    C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

    C944/C944M Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

    C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

    C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

    C950/C950M Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C952 Standard Test Method for Bond Strength of Mortar to Masonry Units

    C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

    C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

    C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

    C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

    C961 Standard Test Method for Lap Shear Strength of Sealants

    C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C964 Standard Guide for Lock-Strip Gasket Glazing

    C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

    C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C972 Standard Test Method for Compression-Recovery of Tape Sealant

    C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete

    C980 Standard Specification for Industrial Chimney Lining Brick

    C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

    C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)

    C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

    C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

    C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

    C1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

    C1005 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

    C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units

    C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

    C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1019 Standard Test Method for Sampling and Testing Grout

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1028 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1032 Standard Specification for Woven Wire Plaster Base

    C1036 Standard Specification for Flat Glass

    C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

    C1040/C1040M Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

    C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

    C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

    C1055 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries

    C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1059/C1059M Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

    C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1067 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

    C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength

    C1073 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1080 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

    C1081 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

    C1082 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

    C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

    C1089 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

    C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

    C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1096/C1096M Standard Test Method for Determination of Wood Fiber in Asbestos Cement

    C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

    C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

    C1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C1103M Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1106 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick

    C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1119/C1119M Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes

    C1120/C1120M Standard Test Method for Wash Test of Asbestos

    C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

    C1122/C1122M Standard Test Method for Wet Volume of Asbestos

    C1123/C1123M Standard Test Method for Compressibility and Recovery of Asbestos

    C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos

    C1125 Standard Test Method for Penetration Index of Asbestos

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

    C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems

    C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

    C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

    C1138M Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

    C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

    C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1141/C1141M Standard Specification for Admixtures for Shotcrete

    C1142 Standard Specification for Extended Life Mortar for Unit Masonry

    C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

    C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    C1154 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

    C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete

    C1160 Standard Specification for Chemical-Resistant Carbon Brick

    C1162/C1162M Standard Test Method for Loose Density of Asbestos

    C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

    C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C1167 Standard Specification for Clay Roof Tiles

    C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

    C1172 Standard Specification for Laminated Architectural Flat Glass

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

    C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

    C1180 Standard Terminology of Mortar and Grout for Unit Masonry

    C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1184 Standard Specification for Structural Silicone Sealants

    C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

    C1186 Standard Specification for Flat Fiber-Cement Sheets

    C1193 Standard Guide for Use of Joint Sealants

    C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1195 Standard Test Method for Absorption of Architectural Cast Stone

    C1196 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

    C1197 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1201/C1201M Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

    C1214M Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)

    C1216/C1216M Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1225 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

    C1227 Standard Specification for Precast Concrete Septic Tanks

    C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

    C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

    C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1232 Standard Terminology of Masonry

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

    C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

    C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1252 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1261 Standard Specification for Firebox Brick for Residential Fireplaces

    C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

    C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

    C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

    C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

    C1272 Standard Specification for Heavy Vehicular Paving Brick

    C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel

    C1280 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1283 Standard Practice for Installing Clay Flue Lining

    C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1298 Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys

    C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

    C1302 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

    C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane

    C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane

    C1311 Standard Specification for Solvent Release Sealants

    C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory

    C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications

    C1314 Standard Test Method for Compressive Strength of Masonry Prisms

    C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C1318 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

    C1319 Standard Specification for Concrete Grid Paving Units

    C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

    C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

    C1324 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

    C1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

    C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

    C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

    C1352/C1352M Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

    C1353/C1353M Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

    C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites

    C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

    C1357 Standard Test Methods for Evaluating Masonry Bond Strength

    C1362 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1364 Standard Specification for Architectural Cast Stone

    C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

    C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1370 Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

    C1384 Standard Specification for Admixtures for Masonry Mortars

    C1385/C1385M Standard Practice for Sampling Materials for Shotcrete

    C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1396/C1396M Standard Specification for Gypsum Board

    C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

    C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

    C1400 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls

    C1401 Standard Guide for Structural Sealant Glazing

    C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)

    C1409 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

    C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)

    C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass

    C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

    C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

    C1436 Standard Specification for Materials for Shotcrete

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1438 Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1439 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1447/C1447M Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

    C1448/C1448M Standard Specification for Non-Asbestos Fiber-Cement Conduit

    C1449/C1449M Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

    C1450/C1450M Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

    C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

    C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

    C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

    C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1464 Standard Specification for Bent Glass

    C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

    C1471 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

    C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

    C1480/C1480M Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1483/C1483M Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

    C1484 Standard Specification for Vacuum Insulation Panels

    C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1489 Standard Specification for Lime Putty for Structural Purposes

    C1491 Standard Specification for Concrete Roof Pavers

    C1492 Standard Specification for Concrete Roof Tile

    C1496 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

    C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

    C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1503 Standard Specification for Silvered Flat Glass Mirror

    C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

    C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)

    C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    C1515 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

    C1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems

    C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1520 Standard Guide for Paintability of Latex Sealants

    C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1526 Standard Specification for Serpentine Dimension Stone

    C1527/C1527M Standard Specification for Travertine Dimension Stone

    C1528 Standard Guide for Selection of Dimension Stone

    C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

    C1530/C1530M Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

    C1531 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index

    C1532/C1532M Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

    C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

    C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1542/C1542M Standard Test Method for Measuring Length of Concrete Cores

    C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

    C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

    C1552 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

    C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

    C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

    C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1565 Standard Test Method for Determination of Pack-Set Index of Portland Cement

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1568 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)

    C1569 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)

    C1570 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)

    C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

    C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

    C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

    C1580 Standard Test Method for Water-Soluble Sulfate in Soil

    C1581/C1581M Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1583/C1583M Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

    C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

    C1586 Standard Guide for Quality Assurance of Mortars

    C1587 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

    C1589/C1589M Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement

    C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603 Standard Test Method for Measurement of Solids in Water

    C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

    C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

    C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

    C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

    C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

    C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

    C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1621/C1621M Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

    C1622/C1622M Standard Specification for Cold-Weather Admixture Systems

    C1623 Standard Specification for Manufactured Concrete Masonry Lintels

    C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

    C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

    C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    C1634 Standard Specification for Concrete Facing Brick

    C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation

    C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    C1645/C1645M Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units

    C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

    C1658/C1658M Standard Specification for Glass Mat Gypsum Panels

    C1660 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

    C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

    C1670/C1670M Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units

    C1675 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1676 Standard Specification for Microporous Thermal Insulation

    C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets

    C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

    C1681 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

    C1686 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

    C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

    C1691 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units

    C1692 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry

    C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1694 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

    C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

    C1696 Standard Guide for Industrial Thermal Insulation Systems

    C1697 Standard Specification for Blended Supplementary Cementitious Materials

    C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

    C1699 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

    C1701/C1701M Standard Test Method for Infiltration Rate of In Place Pervious Concrete

    C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

    C1704/C1704M Standard Test Method for Sampling and Testing Structural Cementitious Panels

    C1705/C1705M Standard Specification for Structural Cementitious Panels

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

    C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1713 Standard Specification for Mortars for the Repair of Historic Masonry

    C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

    C1715 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems

    C1716/C1716M Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

    C1717 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels

    C1719 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1721 Standard Guide for Petrographic Examination of Dimension Stone

    C1722 Standard Guide for Repair and Restoration of Dimension Stone

    C1723 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

    C1728 Standard Specification for Flexible Aerogel Insulation

    C1729 Standard Specification for Aluminum Jacketing for Insulation

    C1729M Standard Specification for Aluminum Jacketing for Insulation

    C1731 Standard Specification for Concrete Floor Tile

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C1737 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    C1738/C1738M Standard Practice for High-Shear Mixing of Hydraulic Cement Paste

    C1740 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

    C1741 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

    C1743 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

    C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

    C1745/C1745M Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1746/C1746M Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

    C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

    C1754/C1754M Standard Test Method for Density and Void Content of Hardened Pervious Concrete

    C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    C1757 Standard Test Method for ?Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

    C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1765 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C1766 Standard Specification for Factory-Laminated Gypsum Panel Products

    C1767 Standard Specification for Stainless Steel Jacketing for Insulation

    C1768/C1768M Standard Practice for Accelerated Curing of Concrete Cylinders

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1775 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

    C1777 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

    C1780 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

    C1781/C1781M Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

    C1784 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    C1785 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

    C1789 Standard Test Method for Use and Calibration of Hand-Held Moisture Meters on Gypsum Panels

    D4 Standard Test Method for Bitumen Content

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

    D8 Standard Terminology Relating to Materials for Roads and Pavements

    D9 Standard Terminology Relating to Wood and Wood-Based Products

    D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

    D20 Standard Test Method for Distillation of Road Tars

    D25 Standard Specification for Round Timber Piles

    D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D41/D41M Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

    D43/D43M Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D75/D75M Standard Practice for Sampling Aggregates

    D76/D76M Standard Specification for Tensile Testing Machines for Textiles

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

    D88 Standard Test Method for Saybolt Viscosity

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D97 Standard Test Method for Pour Point of Petroleum Products

    D98 Standard Specification for Calcium Chloride

    D113 Standard Test Method for Ductility of Bituminous Materials

    D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D139 Standard Test Method for Float Test for Bituminous Materials

    D140/D140M Standard Practice for Sampling Bituminous Materials

    D143 Standard Test Methods for Small Clear Specimens of Timber

    D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

    D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

    D187 Standard Test Method for Burning Quality of Kerosine

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D204 Standard Test Methods for Sewing Threads

    D217 Standard Test Methods for Cone Penetration of Lubricating Grease

    D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

    D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

    D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D229 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D242/D242M Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D243 Standard Test Method for Residue of Specified Penetration

    D244 Standard Test Methods and Practices for Emulsified Asphalts

    D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D299/D299M Standard Specification for Asbestos Yarns

    D312 Standard Specification for Asphalt Used in Roofing

    D315/D315M Standard Specification for Woven Asbestos Tape

    D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D345 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

    D348 Standard Test Methods for Rigid Tubes Used for Electrical Insulation

    D350 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

    D360 Standard Specification for Shellac Varnishes

    D375/D375M Standard Specification for Asbestos Roving

    D380 Standard Test Methods for Rubber Hose

    D395 Standard Test Methods for Rubber Property—Compression Set

    D396 Standard Specification for Fuel Oils

    D402 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

    D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

    D422 Standard Test Method for Particle-Size Analysis of Soils

    D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D449/D449M Standard Specification for Asphalt Used in Dampproofing and Waterproofing

    D450/D450M Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

    D451/D451M Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

    D452/D452M Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

    D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D490 Standard Specification for Road Tar

    D517 Standard Specification for Asphalt Plank

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D523 Standard Test Method for Specular Gloss

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D570 Standard Test Method for Water Absorption of Plastics

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D578/D578M Standard Specification for Glass Fiber Strands

    D596 Standard Guide for Reporting Results of Analysis of Water

    D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

    D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

    D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

    D618 Standard Practice for Conditioning Plastics for Testing

    D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D628/D628M Standard Specification for Asbestos Tubular Sleeving

    D632 Standard Specification for Sodium Chloride

    D633 Standard Volume Correction Table for Road Tar

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D638 Standard Test Method for Tensile Properties of Plastics

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D668 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

    D692/D692M Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D709 Standard Specification for Laminated Thermosetting Materials

    D714 Standard Test Method for Evaluating Degree of Blistering of Paints

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D737 Standard Test Method for Air Permeability of Textile Fabrics

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D751 Standard Test Methods for Coated Fabrics

    D769 Standard Specification for Black Synthetic Iron Oxide

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D816 Standard Test Methods for Rubber Cements

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D858 Standard Test Methods for Manganese in Water

    D859 Standard Test Method for Silica in Water

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

    D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

    D877/D877M Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

    D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D923 Standard Practices for Sampling Electrical Insulating Liquids

    D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

    D946/D946M Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

    D950 Standard Test Method for Impact Strength of Adhesive Bonds

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D971 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration

    D975 Standard Specification for Diesel Fuel Oils

    D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels

    D977 Standard Specification for Emulsified Asphalt

    D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures

    D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

    D996 Standard Terminology of Packaging and Distribution Environments

    D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

    D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1036 Standard Test Methods of Static Tests of Wood Poles

    D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    D1038 Standard Terminology Relating to Veneer and Plywood

    D1042 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1061/D1061M Standard Specification for Asbestos Lap

    D1066 Standard Practice for Sampling Steam

    D1067 Standard Test Methods for Acidity or Alkalinity of Water

    D1068 Standard Test Methods for Iron in Water

    D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1074 Standard Test Method for Compressive Strength of Bituminous Mixtures

    D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

    D1079 Standard Terminology Relating to Roofing and Waterproofing

    D1102 Standard Test Method for Ash in Wood

    D1105 Standard Test Method for Preparation of Extractive-Free Wood

    D1106 Standard Test Method for Acid-Insoluble Lignin in Wood

    D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood

    D1108 Standard Test Method for Dichloromethane Solubles in Wood

    D1109 Standard Test Method for 1?% Sodium Hydroxide Solubility of Wood

    D1110 Standard Test Methods for Water Solubility of Wood

    D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

    D1126 Standard Test Method for Hardness in Water

    D1129 Standard Terminology Relating to Water

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1139/D1139M Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

    D1141 Standard Practice for the Preparation of Substitute Ocean Water

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods

    D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

    D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D1193 Standard Specification for Reagent Water

    D1195/D1195M Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

    D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1250 Standard Guide for Use of the Petroleum Measurement Tables

    D1253 Standard Test Method for Residual Chlorine in Water

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils

    D1280 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

    D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

    D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents

    D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

    D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)

    D1369 Standard Practice for Quantities of Materials for Bituminous Surface Treatments

    D1370/D1370M Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

    D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

    D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

    D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures

    D1414 Standard Test Methods for Rubber O-Rings

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature

    D1429 Standard Test Methods for Specific Gravity of Water and Brine

    D1434 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

    D1435 Standard Practice for Outdoor Weathering of Plastics

    D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1524 Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

    D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials

    D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D1560 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

    D1561/D1561M Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

    D1571/D1571M Standard Specification for Woven Asbestos Cloth

    D1573/D1573M Standard Test Method for Heat Aging of Asbestos Textiles

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

    D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

    D1600 Standard Terminology for Abbreviated Terms Relating to Plastics

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622 Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1635/D1635M Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

    D1644 Standard Test Methods for Nonvolatile Content of Varnishes

    D1652 Standard Test Method for Epoxy Content of Epoxy Resins

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1655 Standard Specification for Aviation Turbine Fuels

    D1665 Standard Test Method for Engler Specific Viscosity of Tar Products

    D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1668 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

    D1669/D1669M Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings

    D1670/D1670M Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

    D1676 Standard Test Methods for Film-Insulated Magnet Wire

    D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D1754/D1754M Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D1758 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes

    D1761 Standard Test Methods for Mechanical Fasteners in Wood

    D1762 Standard Test Method for Chemical Analysis of Wood Charcoal

    D1777 Standard Test Method for Thickness of Textile Materials

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D1816 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

    D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs

    D1864/D1864M Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

    D1865/D1865M Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

    D1918/D1918M Standard Test Method for Asbestos Content of Asbestos Textiles

    D1929 Standard Test Method for Determining Ignition Temperature of Plastics

    D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

    D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters

    D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

    D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

    D1998 Standard Specification for Polyethylene Upright Storage Tanks

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2017 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods

    D2026/D2026M Standard Specification for Cutback Asphalt (Slow-Curing Type)

    D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

    D2050 Standard Terminology Relating to Fasteners and Closures Used with Textiles

    D2059/D2059M Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

    D2061 Standard Test Methods for Strength Tests for Zippers

    D2062 Standard Test Methods for Operability of Zippers

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2100/D2100M Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes

    D2103 Standard Specification for Polyethylene Film and Sheeting

    D2105 Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation

    D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

    D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2132 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

    D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

    D2202 Standard Test Method for Slump of Sealants

    D2203 Standard Test Method for Staining from Sealants

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

    D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2275 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

    D2278 Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens

    D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2290 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

    D2307 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D2369 Standard Test Method for Volatile Content of Coatings

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

    D2395 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials

    D2397/D2397M Standard Specification for Cationic Emulsified Asphalt

    D2399 Standard Practice for Selection of Cutback Asphalts

    D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2444 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D2464 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

    D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2472 Standard Specification for Sulfur Hexafluoride

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

    D2489/D2489M Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

    D2493/D2493M Standard Viscosity-Temperature Chart for Asphalts

    D2500 Standard Test Method for Cloud Point of Petroleum Products

    D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

    D2521/D2521M Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining

    D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

    D2555 Standard Practice for Establishing Clear Wood Strength Values

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D2561 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

    D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

    D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2589/D2589M Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

    D2590/D2590M Standard Test Method for Sampling Chrysotile Asbestos

    D2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D2643/D2643M Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)

    D2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2657 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

    D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

    D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

    D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

    D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)

    D2719 Standard Test Methods for Structural Panels in Shear Through-the-Thickness

    D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2728 Standard Practice for Paving Uses and Application Temperatures for Road Tars

    D2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D2737 Standard Specification for Polyethylene (PE) Plastic Tubing

    D2746 Standard Test Method for Staining Tendency of Asphalt (Stain Index)

    D2752/D2752M Standard Test Methods for Air Permeability of Asbestos Fibers

    D2758 Standard Test Method for Engine Coolants by Engine Dynamometer

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping

    D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

    D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing

    D2823/D2823M Standard Specification for Asphalt Roof Coatings, Asbestos Containing

    D2824/D2824M Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

    D2829 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

    D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

    D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

    D2847 Standard Practice for Testing Engine Coolants in Car and Light Truck Service

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

    D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    D2860/D2860M Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D2880 Standard Specification for Gas Turbine Fuel Oils

    D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

    D2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

    D2899 Standard Practice for Establishing Allowable Stresses for Round Timber Piles

    D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

    D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D2944 Standard Practice of Sampling Processed Peat Materials

    D2946 Standard Terminology for Asbestos and Asbestos-Cement Products

    D2947/D2947M Standard Test Method for Screen Analysis of Asbestos Fibers

    D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D2973 Standard Test Method for Total Nitrogen in Peat Materials

    D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2978 Standard Test Method for Volume of Processed Peat Materials

    D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials

    D2985/D2985M Standard Test Method for Color of Asbestos

    D2987/D2987M Standard Test Method for Moisture Content of Asbestos Fiber

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors

    D2996 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3005 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

    D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

    D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

    D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

    D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3043 Standard Test Methods for Structural Panels in Flexure

    D3044 Standard Test Method for Shear Modulus of Wood-Based Structural Panels

    D3045 Standard Practice for Heat Aging of Plastics Without Load

    D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D3105 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3122 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

    D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

    D3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    D3141/D3141M Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3161/D3161M Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

    D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

    D3170 Standard Test Method for Chipping Resistance of Coatings

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3195/D3195M Standard Practice for Rotameter Calibration

    D3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles

    D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

    D3203/D3203M Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

    D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3251 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

    D3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

    D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

    D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    D3279 Standard Test Method for n-Heptane Insolubles

    D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

    D3316 Standard Test Method for Stability of Perchloroethylene with Copper

    D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

    D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

    D3345 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D3370 Standard Practices for Sampling Water from Closed Conduits

    D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D3398 Standard Test Method for Index of Aggregate Particle Shape and Texture

    D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers

    D3409 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3423/D3423M Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3499 Standard Test Method for Toughness of Wood-Based Structural Panels

    D3500 Standard Test Methods for Structural Panels in Tension

    D3501 Standard Test Methods for Wood-Based Structural Panels in Compression

    D3517 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3597 Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

    D3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

    D3625/D3625M Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

    D3628 Standard Practice for Selection and Use of Emulsified Asphalts

    D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3638 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

    D3639/D3639M Standard Test Method for Classification of Asbestos by Quebec Standard Test

    D3654/D3654M Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

    D3656/D3656M Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns

    D3665 Standard Practice for Random Sampling of Construction Materials

    D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D3670 Standard Guide for Determination of Precision and Bias of Methods of Committee D22

    D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3690 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor

    D3699 Standard Specification for Kerosine

    D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

    D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D3744/D3744M Standard Test Method for Aggregate Durability Index

    D3745 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

    D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

    D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

    D3752 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3759/D3759M Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric

    D3786/D3786M Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method

    D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test

    D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts

    D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3805/D3805M Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

    D3856 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water

    D3864 Standard Guide for On-Line Monitoring Systems for Water Analysis

    D3874 Standard Test Method for Ignition of Materials by Hot Wire Sources

    D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

    D3880/D3880M Standard Test Method for Asbestos Strength Units

    D3884 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D3902 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

    D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

    D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments

    D3999/D3999M Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

    D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)

    D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

    D4022/D4022M Standard Specification for Coal Tar Roof Cement, Asbestos Containing

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems

    D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4070 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

    D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

    D4073 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

    D4074/D4074M Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

    D4078 Standard Specification for Water Emulsion Floor Polish

    D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4124 Standard Test Method for Separation of Asphalt into Four Fractions

    D4125/D4125M Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

    D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

    D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

    D4158 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)

    D4161 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4186/D4186M Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4204 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

    D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

    D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

    D4220 Standard Practices for Preserving and Transporting Soil Samples

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4258 Standard Practice for Surface Cleaning Concrete for Coating

    D4259 Standard Practice for Abrading Concrete

    D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete

    D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

    D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

    D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

    D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4307 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

    D4311/D4311M Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4340 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4354 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing

    D4355 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4375 Standard Practice for Basic Statistics in Committee D-19 on Water

    D4380 Standard Test Method for Density of Bentonitic Slurries

    D4381/D4381M Standard Test Method for Sand Content by Volume of Bentonitic Slurries

    D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4388 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

    D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

    D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D4402/D4402M Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

    D4403 Standard Practice for Extensometers Used in Rock

    D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4427 Standard Classification of Peat Samples by Laboratory Testing

    D4428/D4428M Standard Test Methods for Crosshole Seismic Testing

    D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

    D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

    D4435 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes

    D4439 Standard Terminology for Geosynthetics

    D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

    D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

    D4445 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)

    D4452 Standard Practice for X-Ray Radiography of Soil Samples

    D4460 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

    D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4479/D4479M Standard Specification for Asphalt Roof Coatings - Asbestos-Free

    D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4505 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

    D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D4525 Standard Test Method for Permeability of Rocks by Flowing Air

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4531 Standard Test Methods for Bulk Density of Peat and Peat Products

    D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles

    D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

    D4544 Standard Practice for Estimating Peat Deposit Thickness

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents

    D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

    D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D4580/D4580M Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4586/D4586M Standard Specification for Asphalt Roof Cement, Asbestos-Free

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4592 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

    D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles

    D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

    D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

    D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

    D4611 Standard Test Method for Specific Heat of Rock and Soil

    D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks

    D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

    D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

    D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

    D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method

    D4647/D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695 Standard Guide for General Pavement Deflection Measurements

    D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

    D4700 Standard Guide for Soil Sampling from the Vadose Zone

    D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4728 Standard Test Method for Random Vibration Testing of Shipping Containers

    D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

    D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

    D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile

    D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

    D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics

    D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

    D4788 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

    D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792/D4792M Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

    D4799/D4799M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4821 Standard Guide for Carbon Black - Validation of Test Method Precision and Bias

    D4829 Standard Test Method for Expansion Index of Soils

    D4830 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D4840 Standard Guide for Sampling Chain-of-Custody Procedures

    D4851 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

    D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

    D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

    D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

    D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

    D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock

    D4884/D4884M Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

    D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method

    D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)

    D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

    D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4932/D4932M Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

    D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4956 Standard Specification for Retroreflective Sheeting for Traffic Control

    D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

    D4968 Standard Guide for Annual Review of Test Methods and Specifications for Plastics

    D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D4972 Standard Test Method for pH of Soils

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D4977/D4977M Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

    D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D4989/D4989M Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

    D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

    D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

    D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame

    D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

    D5076/D5076M Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

    D5078/D5078M Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

    D5079 Standard Practices for Preserving and Transporting Rock Core Samples

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5081/D5081M Standard Test Method for Aggregate Layer Hiding Power

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

    D5100/D5100M Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

    D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

    D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

    D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing

    D5124 Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation

    D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

    D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

    D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

    D5148 Standard Test Method for Centrifuge Kerosine Equivalent

    D5149 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

    D5156 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

    D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

    D5172 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water

    D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

    D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

    D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5207 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5210 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5240/D5240M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

    D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site

    D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

    D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles

    D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

    D5268 Standard Specification for Topsoil Used for Landscaping Purposes

    D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5295 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5299 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

    D5311/D5311M Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

    D5312/D5312M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

    D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5321/D5321M Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

    D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

    D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

    D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

    D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5340 Standard Test Method for Airport Pavement Condition Index Surveys

    D5359 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

    D5360 Standard Practice for Design and Construction of Bituminous Surface Treatments

    D5361/D5361M Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

    D5374 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

    D5385 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

    D5391 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

    D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

    D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

    D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

    D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors

    D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors

    D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5421 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

    D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5456 Standard Specification for Evaluation of Structural Composite Lumber Products

    D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

    D5464 Standard Test Method for pH Measurement of Water of Low Conductivity

    D5466 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

    D5469/D5469M Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

    D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

    D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations

    D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

    D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

    D5493 Standard Test Method for Permittivity of Geotextiles Under Load

    D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

    D5496 Standard Practice for In Field Immersion Testing of Geosynthetics

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5505 Standard Practice for Classifying Emulsified Recycling Agents

    D5506 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5521/D5521M Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

    D5536 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties

    D5539 Standard Specification for Seed Starter Mix

    D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

    D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

    D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

    D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

    D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

    D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

    D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

    D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics

    D5624 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

    D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

    D5636/D5636M Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

    D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber

    D5642 Standard Test Method for Sealed Tube Chemical Compatibility Test

    D5643/D5643M Standard Specification for Coal Tar Roof Cement, Asbestos Free

    D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

    D5652 Standard Test Methods for Bolted Connections in Wood and Wood-Based Products

    D5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard

    D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

    D5665 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

    D5685 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

    D5710/D5710M Standard Specification for Trinidad Lake Modified Asphalt

    D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

    D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

    D5718 Standard Guide for Documenting a Groundwater Flow Model Application

    D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

    D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes

    D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

    D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

    D5727/D5727M Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

    D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5737 Standard Guide for Methods for Measuring Well Discharge

    D5738 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging

    D5754 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses

    D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5764 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

    D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

    D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5779/D5779M Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control

    D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

    D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

    D5787 Standard Practice for Monitoring Well Protection

    D5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

    D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics

    D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

    D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes

    D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

    D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis

    D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

    D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

    D5851 Standard Guide for Planning and Implementing a Water Monitoring Program

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

    D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

    D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

    D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

    D5872/D5872M Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

    D5875/D5875M Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems

    D5880 Standard Guide for Subsurface Flow and Transport Modeling

    D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications

    D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

    D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners

    D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners

    D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

    D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

    D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D5898/D5898M Standard Guide for Standard Details for Adhered Sheet Waterproofing

    D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event

    D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

    D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

    D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

    D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

    D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

    D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?°C

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

    D5971/D5971M Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

    D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems

    D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

    D5981 Standard Guide for Calibrating a Groundwater Flow Model Application

    D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

    D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane

    D5995 Standard Guide for Environmental Site Characterization in Cold Regions

    D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites

    D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

    D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

    D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes

    D6026 Standard Practice for Using Significant Digits in Geotechnical Data

    D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability

    D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

    D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

    D6035/D6035M Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

    D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps

    D6046 Standard Classification of Hydraulic Fluids for Environmental Impact

    D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners

    D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6087 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

    D6088 Standard Practice for Installation of Geocomposite Pavement Drains

    D6089 Standard Guide for Documenting a Groundwater Sampling Event

    D6091 Standard Practice for 99?%/95?% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

    D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6102 Standard Guide for Installation of Geosynthetic Clay Liners

    D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

    D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers

    D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

    D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

    D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

    D6114/D6114M Standard Specification for Asphalt-Rubber Binder

    D6117 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

    D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

    D6135 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing

    D6136/D6136M Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

    D6141 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

    D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D6153 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

    D6154 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

    D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

    D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

    D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6169/D6169M Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6170 Standard Guide for Selecting a Groundwater Modeling Code

    D6171 Standard Guide for Documenting a Groundwater Modeling Code

    D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6196 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

    D6208 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

    D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

    D6214/D6214M Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6221 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

    D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6225/D6225M Standard Test Method for Granule Cover of Mineral Surfaced Roofing

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

    D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

    D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6241 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

    D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

    D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

    D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

    D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

    D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

    D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications

    D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6285 Standard Guide for Locating Abandoned Wells

    D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6297 Standard Specification for Asphaltic Plug Joints for Bridges

    D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

    D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

    D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

    D6312 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs

    D6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

    D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

    D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

    D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

    D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics

    D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

    D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes

    D6370 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)

    D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6372 Standard Practice for Design, Testing, and Construction of Micro-Surfacing

    D6373 Standard Specification for Performance Graded Asphalt Binder

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D6380/D6380M Standard Specification for Asphalt Roll Roofing (Organic Felt)

    D6381/D6381M Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

    D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

    D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

    D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

    D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

    D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6429 Standard Guide for Selecting Surface Geophysical Methods

    D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation

    D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

    D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6451 Standard Guide for Application of Asphalt Based Protection Board

    D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations

    D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)

    D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

    D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D6461 Standard Specification for Silt Fence Materials

    D6462 Standard Practice for Silt Fence Installation

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

    D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

    D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

    D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

    D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing

    D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

    D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems

    D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds

    D6512 Standard Practice for Interlaboratory Quantitation Estimate

    D6513 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests

    D6517 Standard Guide for Field Preservation of Groundwater Samples

    D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

    D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

    D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)

    D6525 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products

    D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6555 Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6564 Standard Guide for Field Filtration of Groundwater Samples

    D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method

    D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats

    D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)

    D6570 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6574/D6574M Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

    D6575 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

    D6584 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135? °C

    D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

    D6599 Standard Practice for Construction of Live Fascines on Slopes

    D6600 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods

    D6607 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

    D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

    D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

    D6626 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    D6627/D6627M Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

    D6628 Standard Specification for Color of Pavement Marking Materials

    D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion

    D6630 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

    D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

    D6634/D6634M Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

    D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

    D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

    D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

    D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

    D6643 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance

    D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

    D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

    D6674 Standard Guide for Proficiency Test Program for Fabrics

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

    D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)

    D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

    D6694/D6694M Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

    D6698 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

    D6703 Standard Test Method for Automated Heithaus Titrimetry

    D6704 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

    D6705/D6705M Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

    D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

    D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

    D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

    D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

    D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

    D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction

    D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron

    D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

    D6753/D6753M Standard Specification for Coal Tar Adhesive

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

    D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

    D6765 Standard Practice for Live Staking

    D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

    D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

    D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners

    D6769/D6769M Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

    D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6780/D6780M Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)

    D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6796 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

    D6805 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions

    D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

    D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

    D6818 Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats

    D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D6825 Standard Guide for Placement of Riprap Revetments

    D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills

    D6830 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

    D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

    D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

    D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6871 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

    D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

    D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

    D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

    D6886 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

    D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

    D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

    D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

    D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6925 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

    D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

    D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

    D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D6929 Standard Practice for Freezing of Emulsified Asphalts

    D6930 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

    D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

    D6932/D6932M Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

    D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6937 Standard Test Method for Determining Density of Emulsified Asphalt

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D6945/D6945M Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

    D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

    D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

    D6948/D6948M Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

    D6950/D6950 Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

    D6951/D6951M Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

    D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

    D6997 Standard Test Method for Distillation of Emulsified Asphalt

    D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D6999 Standard Practice for Miscibility of Emulsified Asphalts

    D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

    D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

    D7002 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System

    D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

    D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

    D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

    D7006 Standard Practice for Ultrasonic Testing of Geomembranes

    D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials

    D7008 Standard Specification for Geosynthetic Alternate Daily Covers

    D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses

    D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

    D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

    D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

    D7033 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7045 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

    D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)

    D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

    D7051 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

    D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

    D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

    D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7064/D7064M Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

    D7067 Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane

    D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

    D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7099 Standard Terminology Relating to Frozen Soil and Rock

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

    D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

    D7113/D7113M Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

    D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

    D7120/D7120M Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application

    D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

    D7172 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared

    D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications

    D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes

    D7178 Standard Practice for Determining the Number of Constrictions m of Non-Woven Geotextiles as a Complementary Filtration Property

    D7179 Standard Test Method for Determining Geonet Breaking Force

    D7180/D7180M Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair

    D7196 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

    D7199 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

    D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7227/D7227M Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

    D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    D7229 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

    D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

    D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

    D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)

    D7242/D7242M Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers

    D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7254 Standard Specification for Polypropylene (PP) Siding

    D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods

    D7273/D7273M Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

    D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)

    D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)

    D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

    D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes

    D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

    D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

    D7312 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

    D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

    D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales

    D7341 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

    D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners

    D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

    D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

    D7369 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

    D7370 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7374 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

    D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

    D7379 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7381 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7400 Standard Test Methods for Downhole Seismic Testing

    D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7402 Standard Practice for Identifying Cationic Emulsified Asphalts

    D7403 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

    D7404 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

    D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

    D7407 Standard Guide for Determining The Transmission of Gases Through Geomembranes

    D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

    D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7433 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels

    D7438 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

    D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7469 Standard Test Methods for End-Joints in Structural Wood Products

    D7470 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs

    D7480 Standard Guide for Evaluating the Attributes of a Forest Management Plan

    D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems

    D7495 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

    D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7497 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

    D7498/D7498M Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test

    D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7505/D7505M Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7519 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting

    D7530/D7530M Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7552 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

    D7557/D7557M Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

    D7564/D7564M Standard Practice for Construction of Asphalt-Rubber Cape Seal

    D7585/D7585M Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    D7586/D7586M Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies

    D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

    D7611/D7611M Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

    D7612 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources

    D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes

    D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

    D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

    D7636/D7636M Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

    D7643 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7648 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment

    D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer

    D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

    D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7672 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies

    D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7699/D7699M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

    D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams

    D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag

    D7702/D7702M Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics

    D7703 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System

    D7737 Standard Test Method for Individual Geogrid Junction Strength

    D7741/D7741M Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

    D7743 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders

    D7746 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests

    D7747/D7747M Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

    D7748/D7748M Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products

    D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

    D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

    D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

    D7760 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter

    D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

    D7764 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

    D7765 Standard Practice for Use of Foundry Sand in Structural Fill and Embankments

    D7770 Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method

    D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

    D7852 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys

    D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete

    D7865 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels

    D7870/D7870M Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

    D7880/D7880M Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag

    D7906 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

    E1 Standard Specification for ASTM Liquid-in-Glass Thermometers

    E3 Standard Guide for Preparation of Metallographic Specimens

    E4 Standard Practices for Force Verification of Testing Machines

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E11 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

    E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

    E28 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus

    E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E69 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

    E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

    E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

    E73 Standard Practice for Static Load Testing of Truss Assemblies

    E77 Standard Test Method for Inspection and Verification of Thermometers

    E84 Standard Test Method for Surface Burning Characteristics of Building Materials

    E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    E94 Standard Guide for Radiographic Examination

    E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

    E102/E102M Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

    E105 Standard Practice for Probability Sampling Of Materials

    E108 Standard Test Methods for Fire Tests of Roof Coverings

    E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E119 Standard Test Methods for Fire Tests of Building Construction and Materials

    E122 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

    E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

    E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

    E145 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens

    E154/E154M Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E176 Standard Terminology of Fire Standards

    E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E178 Standard Practice for Dealing With Outlying Observations

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

    E230/E230M Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E303 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

    E308 Standard Practice for Computing the Colors of Objects by Using the CIE System

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E330/E330M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

    E405 Standard Test Methods for Wear Testing Rotary Operators for Windows

    E408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

    E413 Classification for Rating Sound Insulation

    E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

    E456 Standard Terminology Relating to Quality and Statistics

    E477 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

    E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

    E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry

    E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

    E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

    E535 Standard Practice for Preparation of Fire-Test-Response Standards

    E543 Standard Specification for Agencies Performing Nondestructive Testing

    E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

    E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E557 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

    E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

    E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

    E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

    E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

    E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

    E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

    E603 Standard Guide for Room Fire Experiments

    E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E631 Standard Terminology of Building Constructions

    E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

    E659 Standard Test Method for Autoignition Temperature of Liquid Chemicals

    E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

    E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

    E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

    E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

    E681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

    E683 Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings

    E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    E695 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

    E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

    E709 Standard Guide for Magnetic Particle Testing

    E712 Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems

    E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

    E739 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

    E741 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

    E745 Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

    E756 Standard Test Method for Measuring Vibration-Damping Properties of Materials

    E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

    E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

    E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

    E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

    E781 Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates

    E782 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode

    E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

    E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests

    E799 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis

    E800 Standard Guide for Measurement of Gases Present or Generated During Fires

    E814 Standard Test Method for Fire Tests of Penetration Firestop Systems

    E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

    E833 Standard Terminology of Building Economics

    E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

    E864 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

    E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E867 Standard Terminology Relating to Vehicle-Pavement Systems

    E873 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels

    E874 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

    E881 Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode

    E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

    E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

    E903 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

    E906/E906M Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

    E917 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

    E927 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing

    E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

    E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E948 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

    E950/E950M Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

    E964 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

    E965 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

    E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements

    E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    E985 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings

    E987 Standard Test Methods for Deglazing Force of Fenestration Products

    E989 Standard Classification for Determination of Impact Insulation Class (IIC)

    E990 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

    E996 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

    E997 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods

    E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

    E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

    E1014 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels

    E1021 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1036 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells

    E1038 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls

    E1040 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells

    E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

    E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

    E1057 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

    E1074 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

    E1082 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

    E1091 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

    E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

    E1110 Standard Classification for Determination of Articulation Class

    E1111 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

    E1121 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

    E1123 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

    E1124 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

    E1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

    E1142 Standard Terminology Relating to Thermophysical Properties

    E1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

    E1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]

    E1166 Standard Guide for Network Level Pavement Management

    E1169 Standard Practice for Conducting Ruggedness Tests

    E1170 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

    E1171 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

    E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems

    E1185 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

    E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

    E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

    E1215 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

    E1222 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems

    E1233/E1233M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

    E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

    E1258 Standard Test Method for Airflow Calibration of Fan Pressurization Devices

    E1264 Standard Classification for Acoustical Ceiling Products

    E1265 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

    E1274 Standard Test Method for Measuring Pavement Roughness Using a Profilograph

    E1289 Standard Specification for Reference Specimen for Sound Transmission Loss

    E1300 Standard Practice for Determining Load Resistance of Glass in Buildings

    E1307 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

    E1317 Standard Test Method for Flammability of Marine Surface Finishes

    E1318 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods

    E1321 Standard Test Method for Determining Material Ignition and Flame Spread Properties

    E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

    E1325 Standard Terminology Relating to Design of Experiments

    E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation

    E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

    E1337 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

    E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements

    E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

    E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

    E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

    E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

    E1355 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1362 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

    E1364 Standard Test Method for Measuring Road Roughness by Static Level Method

    E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

    E1374 Standard Guide for Open Office Acoustics and Applicable ASTM Standards

    E1399/E1399M Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

    E1402 Standard Guide for Sampling Design

    E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

    E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

    E1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

    E1444/E1444M Standard Practice for Magnetic Particle Testing

    E1448/E1448M Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

    E1462 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules

    E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings

    E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

    E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

    E1480 Standard Terminology of Facility Management (Building-Related)

    E1481 Standard Terminology of Railing Systems and Rails for Buildings

    E1486 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

    E1486M Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]

    E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

    E1489 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

    E1503 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System

    E1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type

    E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors

    E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)

    E1514 Standard Specification for Structural Standing Seam Steel Roof Panel Systems

    E1527 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process

    E1528 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process

    E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

    E1537 Standard Test Method for Fire Testing of Upholstered Furniture

    E1546 Standard Guide for Development of Fire-Hazard-Assessment Standards

    E1551 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

    E1554/E1554M Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

    E1555 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

    E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

    E1557 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II

    E1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

    E1574 Standard Test Method for Measurement of Sound in Residential Spaces

    E1590 Standard Test Method for Fire Testing of Mattresses

    E1591 Standard Guide for Obtaining Data for Fire Growth Models

    E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

    E1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments

    E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

    E1605 Standard Terminology Relating to Lead in Buildings

    E1612/E1612M Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

    E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

    E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

    E1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

    E1643 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

    E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

    E1645 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

    E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

    E1656/E1656M Standard Guide for Classification of Automated Pavement Condition Survey Equipment

    E1660 Standard Classification for Serviceability of an Office Facility for Support for Office Work

    E1661 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

    E1662 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

    E1663 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

    E1664 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

    E1665 Standard Classification for Serviceability of an Office Facility for Facility Protection

    E1666 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

    E1667 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

    E1668 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

    E1669 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

    E1670 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

    E1671 Standard Classification for Serviceability of an Office Facility for Cleanliness

    E1677 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

    E1678 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis

    E1679 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed

    E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E1686 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

    E1690 Standard Test Method for Determination of Ethanol Extractives in Biomass

    E1692 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

    E1693 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

    E1694 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

    E1699 Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes

    E1700 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope

    E1701 Standard Classification for Serviceability of an Office Facility for Manageability

    E1703/E1703M Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

    E1704 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

    E1721 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

    E1725 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

    E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

    E1728 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

    E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

    E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

    E1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

    E1748 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

    E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

    E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

    E1755 Standard Test Method for Ash in Biomass

    E1758 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

    E1763 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods

    E1765 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems

    E1773 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

    E1775 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

    E1776 Standard Guide for Development of Fire-Risk-Assessment Standards

    E1777 Standard Guide for Prioritization of Data Needs for Pavement Management

    E1778 Standard Terminology Relating to Pavement Distress

    E1780 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

    E1783/E1783M Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

    E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

    E1793 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

    E1794 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1799 Standard Practice for Visual Inspections of Photovoltaic Modules

    E1800 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

    E1801 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

    E1802 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules

    E1803 Standard Test Methods for Determining Structural Capacities of Insulated Panels

    E1804 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

    E1821 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

    E1822 Standard Test Method for Fire Testing of Stacked Chairs

    E1825 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems

    E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

    E1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

    E1830 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules

    E1836/E1836M Standard Practice for Building Floor Area Measurements for Facility Management

    E1844 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

    E1845 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

    E1851 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

    E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

    E1859/E1859M Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

    E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

    E1889 Standard Guide for Pavement Management Implementation

    E1890 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

    E1903 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process

    E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

    E1911 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

    E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

    E1925 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures

    E1926 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

    E1927 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

    E1946 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E1957 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

    E1960 Standard Practice for Calculating International Friction Index of a Pavement Surface

    E1966 Standard Test Method for Fire-Resistive Joint Systems

    E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings

    E1974 Standard Specification for Shelter, Electrical Equipment S-250/G

    E1975 Standard Specification for Shelter, Electrical, Equipment S-280/G

    E1976 Standard Specification for Shelter, Tactical, Nonexpandable

    E1977 Standard Specification for Shelter, Tactical, Expandable, One-Side

    E1978 Standard Specification for Shelter, Tactical, Expandable, Two-Side

    E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

    E1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces

    E1993/E1993M Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

    E1995 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally

    E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

    E1998 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

    E2004 Standard Test Method for Facing Cleavage of Sandwich Panels

    E2013 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study

    E2016 Standard Specification for Industrial Woven Wire Cloth

    E2025 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies

    E2026 Standard Guide for Seismic Risk Assessment of Buildings

    E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

    E2029 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

    E2030 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings

    E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119

    E2034 Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

    E2047 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays

    E2058 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)

    E2061 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles

    E2067 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

    E2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

    E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

    E2083 Standard Classification for Building Construction Field Requirements, and Office Overhead Profit

    E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    E2098/E2098M Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

    E2099 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

    E2100 Standard Practice for Calculating the International Runway Friction Index

    E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater

    E2103/E2103M Standard Classification for Bridge Elements—UNIFORMAT II

    E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)

    E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

    E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings

    E2115 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities

    E2120 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

    E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

    E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

    E2127 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

    E2128 Standard Guide for Evaluating Water Leakage of Building Walls

    E2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products

    E2131 Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property

    E2132 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets

    E2133 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

    E2134 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)

    E2135 Standard Terminology for Property and Asset Management

    E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

    E2140 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

    E2141 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

    E2150 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

    E2151 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings

    E2156 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings

    E2157 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

    E2166 Standard Practice for Organizing and Managing Building Data

    E2167 Standard Guide for Selection and Use of Stone Consolidants

    E2168 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating

    E2173 Standard Guide for Disclosure of Environmental Liabilities

    E2174 Standard Practice for On-Site Inspection of Installed Fire Stops

    E2178 Standard Test Method for Air Permeance of Building Materials

    E2179 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

    E2187 Standard Test Method for Measuring the Ignition Strength of Cigarettes

    E2188 Standard Test Method for Insulating Glass Unit Performance

    E2189 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

    E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation

    E2202 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards

    E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2204 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects

    E2213 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

    E2226 Standard Practice for Application of Hose Stream

    E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material

    E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

    E2235 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

    E2238 Standard Guide for Evacuation Route Diagrams

    E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

    E2240 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

    E2241 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

    E2249 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

    E2252 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

    E2255/E2255M Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

    E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

    E2259 Standard Guide for Archiving and Retrieving ITS-Generated Data

    E2260 Standard Guide for Repointing (Tuckpointing) Historic Masonry

    E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

    E2265 Standard Terminology for Anchors and Fasteners in Concrete and Masonry

    E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

    E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality

    E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

    E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

    E2270 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions

    E2271 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

    E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

    E2279 Standard Practice for Establishing the Guiding Principles of Property Management

    E2280 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

    E2281 Standard Practice for Process and Measurement Capability Indices

    E2282 Standard Guide for Defining the Test Result of a Test Method

    E2300 Standard Specification for Highway Traffic Monitoring Devices

    E2306 Standard Practice for Disposal of Personal Property

    E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

    E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E2320 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions

    E2321 Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)

    E2322 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

    E2335 Standard Guide for Laboratory Monitors

    E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

    E2340/E2340M Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

    E2341/E2341M Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

    E2342 Standard Test Method for Durability Testing of Duct Sealants

    E2348 Standard Guide for Framework for a Consensus-based Environmental Decision-making Process

    E2351 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality

    E2353 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

    E2354 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units

    E2355 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

    E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

    E2358 Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

    E2359/E2359M Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

    E2377 Standard Specification for Shelter, Electrical Equipment, Lightweight

    E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property

    E2380/E2380M Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

    E2392/E2392M Standard Guide for Design of Earthen Wall Building Systems

    E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

    E2395 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact

    E2396 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems

    E2397 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems

    E2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems

    E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems

    E2400 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems

    E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact

    E2415 Standard Practice for Installing Piezoelectric Highway Traffic Sensors

    E2430/E2430M Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)

    E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

    E2432 Standard Guide for General Principles of Sustainability Relative to Buildings

    E2452 Standard Practice for Equipment Management Process Maturity (EMPM) Model

    E2453 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property

    E2459 Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

    E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

    E2462 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

    E2463 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

    E2467 Standard Practice for Developing Axle Count Adjustment Factors

    E2468 Standard Practice for Metadata to Support Archived Data Management Systems

    E2484 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices

    E2485/E2485M Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings

    E2486/E2486M Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

    E2489 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

    E2495 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition

    E2497 Standard Practice for Calculation of Asset Movement Velocity (AMV)

    E2499 Standard Practice for Classification of Asset Physical Location Information

    E2505 Standard Practice for Industrial Rope Access

    E2506 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities

    E2511 Standard Guide for Detailing of EIFS-Clad Wall Assemblies

    E2513 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

    E2514 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses

    E2515 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel

    E2516 Standard Classification for Cost Estimate Classification System

    E2517 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

    E2518 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)

    E2527 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight

    E2532 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

    E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

    E2554 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques

    E2556/E2556M Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

    E2557 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments

    E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces

    E2560 Standard Specification for Data Format for Pavement Profile

    E2561 Standard Practice for the Installation of Inductive Loop Detectors

    E2568 Standard Specification for PB Exterior Insulation and Finish Systems

    E2570 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

    E2573 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

    E2574/E2574M Standard Test Method for Fire Testing of School Bus Seat Assemblies

    E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

    E2583 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

    E2586 Standard Practice for Calculating and Using Basic Statistics

    E2587 Standard Practice for Use of Control Charts in Statistical Process Control

    E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

    E2600 Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions

    E2604 Standard Practice for Data Characteristics of Equipment Records

    E2605 Standard Practice for Receiving Assets

    E2606 Standard Practice for Receipt Notification as a Result of Tangible Asset Movement

    E2607 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements

    E2608 Standard Practice for Equipment Control Matrix (ECM)

    E2611 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method

    E2618 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances

    E2619/E2619M Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

    E2620 Standard Classification for Program and Project Estimate Summaries

    E2631 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label

    E2632/E2632M Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials

    E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

    E2635 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation

    E2637 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150

    E2638 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

    E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

    E2652 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

    E2653 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories

    E2665 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

    E2666 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

    E2667 Standard Practice for Acquiring Intersection Turning Movement Traffic Data

    E2671 Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property

    E2672 Standard Practice for Identification and Categorization of Tooling

    E2674 Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss

    E2675 Standard Practice for Property Management System Outcomes

    E2676 Standard Practice for Tangible Property Mobility Index (MI)

    E2688 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

    E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

    E2691 Standard Practice for Job Productivity Measurement

    E2692 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

    E2707 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure

    E2715 Standard Practice for Moveable Property Storage

    E2717 Standard Practice for Estimating the Environmental Load of Residential Wastewater

    E2726/E2726M Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

    E2727 Standard Practice for Assessment of Rainwater Quality

    E2728 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings

    E2741 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2742 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2743 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2745 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2746 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2747 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2748 Standard Guide for Fire-Resistance Experiments

    E2749 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

    E2750 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM

    E2751/E2751M Standard Practice for Design and Performance of Supported Laminated Glass Walkways

    E2759 Standard Practice for Highway Traffic Monitoring Truth-in-Data

    E2768 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

    E2772 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2773 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2774 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

    E2779 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters

    E2780 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters

    E2785 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

    E2786 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems

    E2788 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems

    E2793 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

    E2811 Standard Practice for Management of Low Risk Property (LRP)

    E2812 Standard Practice for Uniform Data Management in Asset Management Records Systems

    E2813 Standard Practice for Building Enclosure Commissioning

    E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

    E2817 Standard Test Method for Test Fueling Masonry Heaters

    E2835 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

    E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

    E2840 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

    E2841 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions

    E2858 Standard Practice for Sales of Personal Property

    E2883 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

    E2912 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction

    E2921 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems

    E2923 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

    E2936 Standard Guide for Contractor Self Assessment for U.S. Government Property Management Systems

    E2955 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

    F36 Standard Test Method for Compressibility and Recovery of Gasket Materials

    F37 Standard Test Methods for Sealability of Gasket Materials

    F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials

    F146 Standard Test Methods for Fluid Resistance of Gasket Materials

    F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

    F326 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

    F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

    F402 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

    F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

    F409 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

    F436 Standard Specification for Hardened Steel Washers

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F437 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F438 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

    F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

    F442/F442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

    F444 Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas

    F445 Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas

    F446 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

    F449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

    F462 Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities

    F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

    F481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

    F485 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

    F493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

    F510/F510M Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

    F512 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

    F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F567 Standard Practice for Installation of Chain-Link Fence

    F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F626 Standard Specification for Fence Fittings

    F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

    F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

    F654 Standard Specification for Residential Chain Link Fence Gates

    F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

    F667 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F693 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

    F708 Standard Practice for Design and Installation of Rigid Pipe Hangers

    F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

    F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F746 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

    F793 Standard Classification of Wall Covering by Use Characteristics

    F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

    F834 Standard Consumer Safety Specification for Toy Chests

    F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F837 Standard Specification for Stainless Steel Socket Head Cap Screws

    F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F851 Standard Test Method for Self-Rising Seat Mechanisms

    F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing

    F877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

    F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F883 Standard Performance Specification for Padlocks

    F891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

    F894 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

    F897 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

    F900 Standard Specification for Industrial and Commercial Swing Gates

    F903 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

    F904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

    F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

    F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

    F949 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

    F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

    F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F963 Standard Consumer Safety Specification for Toy Safety

    F969 Standard Practice for Construction of Chain-Link Tennis Court Fence

    F970 Standard Test Method for Static Load Limit

    F976 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use

    F1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

    F1060 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

    F1066 Standard Specification for Vinyl Composition Floor Tile

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1089 Standard Test Method for Corrosion of Surgical Instruments

    F1090 Standard Classification for Bank and Mercantile Vault Construction

    F1105 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

    F1110 Standard Test Method for Sandwich Corrosion Test

    F1111 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

    F1113 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

    F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

    F1123 Standard Specification for Non-Metallic Expansion Joints

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1141 Standard Specification for Wallcovering

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1216 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

    F1233 Standard Test Method for Security Glazing Materials And Systems

    F1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

    F1267 Standard Specification for Metal, Expanded, Steel

    F1275 Standard Test Method for Performance of Griddles

    F1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

    F1282 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

    F1290 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

    F1292 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

    F1303 Standard Specification for Sheet Vinyl Floor Covering with Backing

    F1336 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1342/F1342M Standard Test Method for Protective Clothing Material Resistance to Puncture

    F1344 Standard Specification for Rubber Floor Tile

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1346 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

    F1361 Standard Test Method for Performance of Open Deep Fat Fryers

    F1379 Standard Terminology Relating to Barbed Tape

    F1412 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

    F1417 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

    F1427 Standard Consumer Safety Specification for Bunk Beds

    F1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

    F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)

    F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

    F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1484 Standard Test Methods for Performance of Steam Cookers

    F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

    F1488 Standard Specification for Coextruded Composite Pipe

    F1496 Standard Test Method for Performance of Convection Ovens

    F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

    F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

    F1521 Standard Test Methods for Performance of Range Tops

    F1545 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

    F1553 Standard Guide for Specifying Chain Link Fence

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1577 Standard Test Methods for Detention Locks for Swinging Doors

    F1578 Standard Test Method for Contact Closure Cycling of a Membrane Switch

    F1592 Standard Test Methods for Detention Hollow Metal Vision Systems

    F1595 Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

    F1596 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity

    F1598 Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

    F1605 Standard Test Method for Performance of Double-Sided Griddles

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F1637 Standard Practice for Safe Walking Surfaces

    F1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

    F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly

    F1647 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes

    F1661 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

    F1662 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

    F1663 Standard Test Method for Determining the Capacitance of a Membrane Switch

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe

    F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

    F1680 Standard Test Method for Determining Circuit Resistance of a Membrane Switch

    F1683 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component

    F1689 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

    F1695 Standard Test Method for Performance of Underfired Broilers

    F1696 Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines

    F1700 Standard Specification for Solid Vinyl Floor Tile

    F1704 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

    F1743 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F1758 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

    F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

    F1760 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

    F1762 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch

    F1801 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

    F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F1812 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

    F1817 Standard Test Method for Performance of Conveyor Ovens

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing

    F1860 Standard Specification for Rubber Sheet Floor Covering With Backing

    F1861 Standard Specification for Resilient Wall Base

    F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

    F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

    F1870 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

    F1875 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface

    F1895 Standard Test Method for Submersion of a Membrane Switch

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F1911 Standard Practice for Installation of Barbed Tape

    F1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing

    F1915 Standard Test Methods for Glazing for Detention Facilities

    F1920 Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines

    F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

    F1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

    F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

    F1961 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

    F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

    F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

    F1974 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

    F1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

    F1995 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch

    F1996 Standard Test Method for Silver Migration for Membrane Switch Circuitry

    F2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows

    F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    F2034 Standard Specification for Sheet Linoleum Floor Covering

    F2055 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

    F2072 Standard Test Method for Hosedown of a Membrane Switch

    F2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment

    F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

    F2080 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe

    F2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms

    F2093 Standard Test Method for Performance of Rack Ovens

    F2098 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings

    F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

    F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

    F2140 Standard Test Method for Performance of Hot Food Holding Cabinets

    F2144 Standard Test Method for Performance of Large Open Vat Fryers

    F2158 Standard Specification for Residential Central-Vacuum Tube and Fittings

    F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F2165 Standard Specification for Flexible Pre-Insulated Piping

    F2169 Standard Specification for Resilient Stair Treads

    F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

    F2195 Standard Specification for Linoleum Floor Tile

    F2200 Standard Specification for Automated Vehicular Gate Construction

    F2206 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock

    F2208 Standard Safety Specification for Residential Pool Alarms

    F2233 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

    F2262 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9

    F2285 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use

    F2303 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

    F2304 Standard Practice for Sealing of Sewers Using Chemical Grouting

    F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

    F2324 Standard Test Method for Prerinse Spray Valves

    F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems

    F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

    F2380 Standard Test Method for Performance of Conveyor Toasters

    F2387 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs

    F2389 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

    F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2414 Standard Practice for Sealing Sewer Manholes Using Chemical Grouting

    F2434 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing

    F2454 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting

    F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

    F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F2519 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

    F2550 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall

    F2551 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes

    F2592 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

    F2611 Standard Guide for Design and Construction of Chain Link Security Fencing

    F2623 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

    F2656 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers

    F2735 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

    F2769 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

    F2831 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

    F2861 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes

    G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

    G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

    G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    G62 Standard Test Methods for Holiday Detection in Pipeline Coatings

    G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

    G87 Standard Practice for Conducting Moist SO2 Tests

    G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

    G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

    G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils

    G166 Standard Guide for Statistical Analysis of Service Life Data

    G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data

    G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface

    G190 Standard Guide for Developing and Selecting Wear Tests

    This combined collection includes 1,300+ building codes standards and 2,300 construction standards.