WK52 Practice for Unit Masonry Workmanship
WK828 Precast Concrete Burial Vaults and Graveliners
WK933 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
Proposed Revision of
D6348-98
WK1663 Standard Terminology of Building Seals and Sealants
Proposed Revision of
C717-03a
WK1680 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
WK1902 Standard Test Method for Blast-Resistant Doors
WK2423 Standard Test Method for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
WK3150 Standard Test Method for Resistance of Adhesive Bonds to Chemical Reagents
Proposed Revision of
D896-97
WK3243 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
Proposed Revision of
D3636-00
WK3551 Guide for the Assessment of Demineralized Bone Without Excipient
WK3819 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
Proposed Revision of
C474-02
WK3822 Repeated Direct Shear Test of Soils Under Consolidated Drained Conditions
WK4052 Determination of Total Phosphorus in Water, Waste Water by Suppressed Ion Chromatography
WK4193 Determination of Turbidity Above 1 TU in the In-Situ Mode
WK4291 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Proposed Revision of
D6890-03a
WK4345 Standard Terminology Relating to Thermophysical Properties
Proposed Revision of
E1142-97(2003)
WK5325 Practice for Spacecraft Hardware Thermal Vacuum Bakeouts
WK5436 Guide for Extension of Data from Fire Tests Conducted in Accordance with ASTM E 814
WK5710 /Guide for Friction Measurements of Aerodrome Runways
WK6920 Test Method for Fatigue Resistance of Structural Silicone
WK6936 Fire Resistive HVAC Duct Systems
WK7251 Hydraulically Applied 100% Wood fiber Mulches
WK7252 Hydraulically Applied 100% Cellulose Fiber Mulches
WK7253 Hydraulically Applied Blended Fiber Mulches
WK7604 Archiving ITS-Generated Traffic Monitoring Data
WK7731 Measurement of Ground-Borne Vibration
WK7774 Building Enclosure System Materials, Assemblies, and Systems
WK8124 Determining PM2.5 and PM10 Mass in Stack Gases
WK8279 Standard Terminology Relating to Vascular Stents
WK8435 Measuring and Tracking Sensory Descriptive Panel and Assessor Performance
WK8601 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
Proposed Revision of
E408-71(2002)
WK8631 Standard Practice for On-Site Inspection of Installed Fire Stops
Proposed Revision of
E2174-04
WK8908 School Preparedness and All Hazard Response
WK9048 STANDARD CLASSIFICATION FOR LIQUID APPLIED PROTECTIVE COATINGS USED IN SPRAY POLYURETHANE FOAM ROOFING
WK9106 Practice for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials
WK9245 STM for Determination of Relative Crystallinity of Mordenite Zeolite by X-ray Diffraction
WK9258 Practice for Design and Performance of Supported Glass Walkways
WK9302 Standard Test Method for the Critical Stress Intensity Factor and Fracture Tougneness of Graphite
WK9352 Standard Practice for Conducting a Measurement Systems Analysis
WK9783 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-01
WK9805 Fire Testing of School Bus Seat Assemblies
WK9866 Test Method for Analysis of Tin-Based Solder Alloys for Lead, Cadmium, Mercury, Antimony and Bismuth (and others) Using Inductively Coupled Plasma Atomic Emission Spectrometry
WK10176 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting (Withdrawn 2008)
Proposed Revision of
D2092-95(2001)e1
WK10193 Recommended Practice for GASKET CONSTANTS FOR BOLTED JOINT DESIGN
WK10209 Test Method for Exposure of Fire Stop Materials to Severe Environmental Conditions.
WK10401 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
Proposed Revision of
F1055-98e1
WK10741 Determination of Methanol in Propane by Gas Chromatography and Flame Ionization Detection
WK10803 To Determine the Dry and Wet Tensile Strength of Hydraulically Applied Fiber Matrix Products
WK10811 Standard Specification for Cork Tile Flooring
WK10816 Time Evaluation of Forced Entry Resistant Assemblies
WK11080 Standard Guide for Environmentally Sound Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
WK11197 Air Barrier Materials--Medium-Density Closed-Cell Rigid Spray Polyurethane Foam
WK11377 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
D2846/D2846M-06
WK11411 Test Method for Metering Slip Resistance of Walkway Surfaces with Variable Angle Tribometers
WK11425 Private Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous
WK11705 In-Place Determination of Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
WK11706 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
Proposed Revision of
C418-05
WK11707 Obtaining Measurements with Articulated Strut Tribometers (AST)
WK11775 Use of Drainage System Media with Waterproofing Systems
WK11776 Determining Particle Size Distribution of Soil Using Hydrometer (Sedimentation) or Combined Hydrometer and Sieve Analysis Procedures
WK11865 Standard Guide for Testing Coil Coatings (Withdrawn 2009)
Proposed Revision of
D3794-00
WK11958 Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
WK12008 Estimating the Function of Gap Junction Intercellular Communications (GJIC) for Detecting the Tumor-Promoting Activity by the Scrape Loading Dye Transfer Assay
WK12052 Evaluating the Under-Deck Fire Test Response of Deck Structures
WK12215 tandard Test Method for Foaming Characteristics of Lubricating Oils
Proposed Revision of
D892-05
WK12373 Evaluation of Relative Range Error for Medium-Range 3D Imaging Systems
WK12395 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
Proposed Revision of
D2979-01
WK12744 Flexible Aerogel Insulation
WK12802 Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
WK12892 Standard Guide for Process Sampling
WK13012 MFDD Multi Functioal Distribution Device
WK13067 Major and Minor Elements in Cement by X-Ray Fluorescence
WK13074 Standard Test Method for Testing of Low Speed Barriers for Errant Vehicles
WK13229 Determination of Hydraulically Applied Erosion Control Product (HECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
WK13560 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-06
WK13659 Test Evaluation Procedures for Coating QualificationIntended for Use on High-Strength Structural Bolts
WK13689 Standard Test Method for Permeability of Granular Soils (Constant Head)
Proposed Revision of
D2434-68(2006)
WK13834 Performance of Below-Grade Waterproofing Membranes
WK13918 Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
WK13946 Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-Ray Tubes
WK14100 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Proposed Revision of
D36-06
WK14256 Geogrid Junction Strength
WK14355 Evaluating Hot Tire Pick-Up of Coatings applied to Concrete
WK14401 Evaluating the Fire Test Response of Deck Structures to Burning Brands
WK14462 Standard Test Method for Yarn Number Based on Short-Length Specimens
Proposed Revision of
D1059-01
WK14502 Standard Specification for Tub and Shower Enclosures
WK14774 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
Proposed Revision of
D3465-00
WK14899 Determination of Firmness and Stability for the Accessibility of Surface Systems Under and Around Playground Equipment Using a Rotational Penetrometer
WK15152 Guide for Characterization of Ceramic- and Mineral-Based Scaffolds Used for Tissue-Engineered Medical Products (TEMPs) and as Medical Devices for Surgical Implant Applications
WK15155 Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method
Proposed Revision of
D3161-06
WK15177 Thermocouple Verification
WK15291
WK15356 Standard Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces
Proposed Revision of
F485-02
WK15434 Test Method for Analysis of Tin-based Solder Alloys Using Optical Emission Spectrometry
WK15489 Standard Test Method for Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
Proposed Revision of
C156-05
WK15744 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07
WK15778 Guide for Science-based and Risk-based Cleaning Process Development and Validation
WK15810 Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
WK15812 Test Methods for Determination of Trace Elements in Graphite by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP OES) and Electrothermal Vaporization-ICP OES (ETV-ICP OES)
WK15822 Characterizing Performance Properties of Synthetic Turf Systems
WK15864 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK15919 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
Proposed Revision of
C348-02
WK15920 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
Proposed Revision of
C349-02
WK15922 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
Proposed Revision of
C109/C109M-05
WK16104 CONSTRUCTION OF ASPHALT-RUBBER CAPE SEAL
WK16109 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
Proposed Revision of
F1055-98(2006)
WK16326 Hydraulically Applied Erosion Control Products (HECP)
WK16329 To Determine Degredation of Hydraulically Applied Fiber Matrix Products
WK16340 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
Proposed Revision of
D4753-02
WK16355 Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
Proposed Revision of
D6581-00(2005)
WK16539 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Proposed Revision of
F1216-07b
WK16700 Evaluating the Dry-Through Time of Traffic Paints
WK16854 Test Method for Measuring the Energy Absorption Properties of Polymer Matrix Composites Using the Flat Coupon Crush Method
WK16953 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A688/A688M-04
WK16958 Fluid-Applied Air Barrier MaterialsStandard Specification for Carbon Steel Tee Rails
WK16964 Guide for Security Design Criteria Development
WK16966 Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
Proposed Revision of
E2171-02
WK16990 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
Proposed Revision of
E1348-02(2007)
WK16994 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
Proposed Revision of
C1059-99
WK17007 Continuous Measurement of Turbidity
WK17055 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
Proposed Revision of
D5594-98(2004)
WK17119 Test Method for Acid Site Characterization on Zeolites by Dynamic Flow Method
WK17122 Test Method for Carbon Monoxide on Supported Platinum on Alumina Catalysts using Manometric Method
WK17123 Test Method for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Catalysts using Dynamic Flow Method
WK17124 Test Method for Determination of Sludging Formation of Inhibited Oils Without the Inclusion of Water (Dry TOST Method)
WK17170 Determination of Asbestos in Soil
WK17177 Examination of Fungal Structures on Tape Lift Samples by Optical Microscopy
WK17330 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
Proposed Revision of
E2368-04e1
WK17338 Standard Specification for Gypsum Board
Proposed Revision of
C1396/C1396M-06a
WK17397 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
Proposed Revision of
B565-04
WK17404 Standard Guide for Inspection of Amusement Rides and Devices
Proposed Revision of
F893-05a
WK17412 Standard Practice for Maintenance Procedures for Amusement Rides and Devices
Proposed Revision of
F853-05
WK17449 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
Proposed Revision of
D2565-99
WK17454 In-Vivo Arterial Deformations and Cycles
WK17533 Pre-Cclinical in vivo Evaluation of Spinal Fusion
WK17580 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
Proposed Revision of
F1735-02e1
WK17587 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-07
WK17588 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
Proposed Revision of
E2102-04a
WK17605
WK17626 Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
WK17642 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
Proposed Revision of
D7372-07
WK17659 Precast Concrete Products Used for Stormwater Management
WK17663 Hydraulic Capacity Evaluation of Hydrodynamic Separators and Underground Settling Devices
WK17665 Assessment of Suspended Solids Removal Efficiency of Hydrodynamic Separators and Underground Settling Devices
WK17748 Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
WK17751 Determining Biodegradation of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
WK17758 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
Proposed Revision of
F1470-02
WK17785 qualifying all acrylic heated windshields
WK17790 Concrete Floor Tile
WK17791 Guide for Installation Methods for Concrete Floor Tile Products
WK17794 Standard Terminology for Paint, Related Coatings, Materials, and Applications
Proposed Revision of
D16-07
WK17797 Human Impact on commercial skylights
WK17830 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Proposed Revision of
E648-06a
WK17836 Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
WK17843 Copper Clad Steel Wire in Tracer Wire Applications
WK17912 Automatic Particle Counting below 4 microns in Lubricating and Hydraulic Fluids
WK17916 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Proposed Revision of
D3948-07
WK17918 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
Proposed Revision of
D7224-07
WK17919 THE USE OF COAL COMBUSTION PRODUCTS FOR UNDERGROUND MINE FILL
WK18018 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets (Withdrawn 2002)
C785-93e1
WK18019 Standard Specification for Nuclear-Grade Zirconium Oxide Powder (Withdrawn 1994)
C1065-93
WK18020 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
C1098-93
WK18134 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
Proposed Revision of
D5444-05
WK18162 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-06a
WK18182 Hydraulically Applied Straw
WK18217 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Proposed Revision of
E1601-98(2003)e1
WK18241 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK18250 Standard Terminology Relating to Pesticides
Proposed Revision of
E609-05
WK18293 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
Proposed Revision of
E598-96(2002)
WK18327 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
Proposed Revision of
E2176-01
WK18329 Standard Specification for Seamless Copper Tube
Proposed Revision of
B75-02
WK18366 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
Proposed Revision of
E1709-00e1
WK18399 Standard Guide for Structural Sealant Glazing
Proposed Revision of
C1401-07
WK18405 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
Proposed Revision of
F2306/F2306M-07
WK18432 Standard Guide for Sampling Fluvial Sediment in Motion
Proposed Revision of
D4411-03
WK18434 Standard Terminology Relating to Gaseous Fuels
Proposed Revision of
D4150-03
WK18446 Standard Practice for Computing the Colors of Objects by Using the CIE System
Proposed Revision of
E308-06
WK18448 Determination of Additive Elements in Lubricating Oils by Energy Dispersive X-Ray Fluorescence (EDXRF)
WK18481 Delphastus catalinae (Horn) (Coleoptera:Coccinellidae).
WK18508 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
Proposed Revision of
D3291-97(2003)
WK18535 Standard Practice for Automatic Sampling of Gaseous Fuels
Proposed Revision of
D5287-97(2002)
WK18549 Standard Specification for Concrete Aggregates
Proposed Revision of
C33-07
WK18571 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
Proposed Revision of
E377-96(2002)
WK18576 Sampling of gaseous UF6
WK18635
Proposed Revision of
D4829-07
WK18675 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK18687 Evaluating Air Performance Characteristics of Battery Powered Vacuum Cleaners
WK18689 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK18718 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
Proposed Revision of
D228-06
WK18772 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK18774 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK18883 Performing Constructability Evaluations
WK18885 Harmonized Amusement Ride and Device Standard for Canada
WK18900 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
Proposed Revision of
E2492-07
WK18919 Cummins ISM Test
WK18947 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
Proposed Revision of
D7219-05
WK18958 Standard Specification for Aboveground Portable Pools for Residential Use
Proposed Revision of
F2666-07
WK18962 Standard Specification for Ladders, Fixed, Vertical, Steel, Ship's (Withdrawn 2008)
F840-83(2003)
Replacement with F1166
WK18964 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
Proposed Revision of
D5994-98(2003)
WK18965 the Case Review of Forensic Document Examinations
WK18978 relating to precast concrete products
WK19042 UPS SYSTEMS SHIPBOARD
WK19049 Consistence and Reproducibility of Sputter Rate Measurements
WK19063 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19069 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19071 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19073 Poured-In-Place Playground Surface Under and Around Playground Equipment
WK19074 Standard Terminology for Waste and Waste Management
Proposed Revision of
D5681-98a(2004)e1
WK19089 Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectroscopy
WK19097 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
Proposed Revision of
D559-03
WK19098 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
Proposed Revision of
D560-03
WK19105 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Proposed Revision of
D5453-08
WK19130 Lead Content in Polyvinyl Chloride (PVC) Plastics Used in Childrens Consumer Products
WK19206 Standard Terminology Relating to Resilient Floor Coverings
Proposed Revision of
F141-04
WK19241 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK19253 Certification of Personnel Engaged in Construction Inspection and/or Testing
WK19262 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK19271 Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure
Proposed Withdrawal of
D5733-99
WK19307 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-07
WK19311 Standard Terminology for Unmanned Air Vehicle Systems
Proposed Revision of
F2395-07
WK19312 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
Proposed Revision of
E2584-07
WK19315 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-06a
WK19318 Standard Test Method for Abrasion of Ambidextrous Medical Examination Gloves
WK19346 Standard Specification for Styrene Monomer
Proposed Revision of
D2827-04
WK19363 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
Proposed Revision of
E2388-05
WK19372 Analysis of impurities in refined Silver by ICP
WK19373 Analysis of platinum and palladium at 4% in PGM alloys by ICP
WK19398 Examination of Counterfeit Documents.
WK19415 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK19430 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-07a
WK19431 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-07b
WK19471 Thermoplastic Pavement Marking Material for Use in Non-Snow Plow Areas
WK19509 Installation of Water-Resistive Barriers
WK19510 Water Resistance of Water-Resistive Barriers
WK19543 Flame Resistance of Leather
WK19571 Requirements for New Pipe and Fitting Materials for Gas Distribution Systems
WK19618 Industrial Thermal Insulation Systems
WK19624 Application of Heat Weldable Styrene Butadiene Styrene (SBS) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
WK19640 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil Impregnated)
Proposed Revision of
B439-07
WK19660 Developing and Using Appropriate Scales
WK19715 Standard Test Methods for Archery Bowstring Component-Serving String Material
Proposed Revision of
F1648-95(2003)
WK19731 Standard Guide for General Design Considerations for Hot Cell Equipment
Proposed Revision of
C1533-02
WK19743 Heats and Temperatures Calibration of Differential Scanning Calorimetry and Differential Thermal Analyzers Using High Rates
WK19776 Cloud Point of Petroleum Products (Automated Method)
WK19796 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
Proposed Revision of
D3749-95(2002)
WK19806 Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)
WK19820 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
Proposed Revision of
A505-00(2005)
WK19858 Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires (Withdrawn 2009)
Proposed Revision of
F551-89(2000)
WK19859 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys (Withdrawn 2008)
E35-88(2002)
Replacement with B0954
WK19864 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
Proposed Revision of
B311-93(2002)e1
WK19876 Bicycle Handlebar Grips
WK19883 Conducting and Evaluating Galvanic Corrosion Tests of Medical Implant Devices
WK19905 Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
Proposed Revision of
F1426-94(2003)
WK19927 Specification for Nuclear-Grade Beryllium Oxide Powder (Withdrawn 1991)
C708-87
WK19961 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK19965 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
Proposed Revision of
C1308-95(2001)
WK19968 Specification for Nuclear-Grade Beryllium Oxide Powder (Withdrawn 1991)
C708-87
WK19979 Standard Specification for Cast Iron Soil Pipe and Fittings
Proposed Revision of
A74-06
WK19987 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D5036-99(2005)
WK19989 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D5082-99(2005)
WK20008 Block Resistance of Inks and Coatings Using the I.C. Block Tester
WK20018 Standard Specification for Refined Benzene-535
Proposed Revision of
D2359-07
WK20022 Standard Specification for Refined Benzene-545
Proposed Revision of
D4734-07
WK20023 Standard Specification for Benzene for Cyclohexane Feedstock
Proposed Revision of
D5871-07
WK20024 Standard Specification for Benzene for Use with Zeolite Based Catalysts
Proposed Revision of
D7124-07
WK20025 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
Proposed Revision of
D7185-07
WK20067 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
Proposed Revision of
E907-96(2004)
WK20071 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
Proposed Revision of
C1105-08
WK20072 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
Proposed Revision of
C1293-08a
WK20073 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
Proposed Revision of
C1293-08a
WK20075 Determination of Higher Molecular Weight Components in Fuel Corrosion Inhibitors by Gel Permeation Chromatography
WK20101 Standard Terminology Relating to Declarable Substances in Materials
Proposed Revision of
F2576-07a
WK20103 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Proposed Revision of
D3241-08a
WK20129 Evaluating Limestone for Use in Wet Flue Gas Desulfuization Applications by Reactivity
WK20133 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-08a
WK20139 Standard Practice for Modified Salt Spray (Fog) Testing
Proposed Revision of
G85-02e1
WK20166 Standard Specification for Headed Steel Bars for Concrete Reinforcement
Proposed Revision of
A970/A970M-07
WK20176 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
Proposed Revision of
E855-90(2000)
WK20184 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
Proposed Revision of
D5491-03
WK20189 Evaluating the Attributes of a Forest Management Plan
WK20241 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-07
WK20263 Standard Specification for Application of Gypsum Sheathing
Proposed Revision of
C1280-07
WK20273 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-08
WK20330 Describing and Specifying Inductively Coupled Plasma Mass Spectrometers
WK20334 Determination of Analyzer Site Precision
WK20337 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
Proposed Revision of
E126-05a
WK20339 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Proposed Revision of
D7151-05
WK20341 Standard Test Method for Shear Testing of Aluminum Alloys
Proposed Revision of
B769-07
WK20348 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
Proposed Revision of
D7148-07
WK20355 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Proposed Revision of
C518-04
WK20356 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Proposed Revision of
D130-04e1
WK20360 Standard Practice for Strain-Controlled Fatigue Testing
Proposed Revision of
E606-04e1
WK20369 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
Proposed Revision of
E2287-03
WK20371 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
Proposed Revision of
D4643-08
WK20373 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
Proposed Revision of
D4959-07
WK20375 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
Proposed Revision of
D1556-07
WK20377 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
Proposed Revision of
D6938-08
WK20380 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
Proposed Revision of
D6780-05
WK20384 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
Proposed Revision of
D5969-05e2
WK20385 Determination of Total Glycerin in Biodiesel (B-100) by Liquid Chromatography
WK20409 Standard Test Method for Staining of Porous Substrate by Joint Sealants
Proposed Revision of
C1248-08
WK20417 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
Proposed Revision of
D2489-02
WK20437
Proposed Revision of
WK20439 Interface of Active Vehicle Barriers and Automated Access Control Systems.
WK20443 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-08a
WK20461 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
Proposed Revision of
D6142-03
WK20466 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
Proposed Revision of
D3549-03
WK20474 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Proposed Revision of
D6222-02e2
WK20480 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
Proposed Revision of
A888-08
WK20492 Measuring the Time-Dependent Modulus of Sealant Using Stress Relaxation
WK20494 Guide for the Evaluation of Installed Joint Sealants
WK20522 Standard Specification for Functional Additions for Use in Hydraulic Cements
Proposed Revision of
C688-00(2005)
WK20534 Standard Specification for Geosynthetic Alternate Daily Covers
Proposed Revision of
D7008-03
WK20536 Emergency Preparedness of Private-Sector-Owned Public Assembly Venues
WK20543 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Proposed Revision of
C430-96(2003)
WK20549 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
Proposed Revision of
D5506-98(2003)
WK20560 Standard Practice for Mechanical Collection and Within-System Preparation of a Gross Sample of Coal from Moving Streams (Withdrawn 2008)
Proposed Withdrawal of
D7256/D7256M-08
WK20561 Standard Practice for Mechanical Auger Sampling (Withdrawn 2008)
Proposed Withdrawal of
D4916-04
WK20562 Standard Practice for Quality Management of Mechanical Coal Sampling Systems (Withdrawn 2008)
Proposed Withdrawal of
D4702-07
WK20563 Standard Practice for Bias Testing a Mechanical Coal Sampling System (Withdrawn 2008)
Proposed Withdrawal of
D6518-07
WK20564 Adventitious agent safety in xenogeneic TEMPs
WK20571 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
Proposed Revision of
E1188-05
WK20609 Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring and Vapor Intrusion Evaluations1
WK20631 Estimation of Breaking Energy for a Tire Deformed by a Slow-Moving Plunger
WK20633 Standard Test Method for Cell Size of Rigid Cellular Plastics
Proposed Revision of
D3576-04
WK20641 Cautionary Labeling of Inflatable Air Mattresses
WK20642 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20644 Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
Proposed Revision of
D4822-88(2003)
WK20645 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
Proposed Revision of
D3975-93(2003)
WK20665 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
Proposed Revision of
D6243-06
WK20674 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
Proposed Revision of
F2007-07a
WK20677 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-07a
WK20683 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
Proposed Revision of
C361-05e1
WK20692 Standard Test Method for Measurement of Fracture Toughness
Proposed Revision of
E1820-08
WK20693 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
Proposed Revision of
D3381-05
WK20696 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
Proposed Revision of
D6186-98(2003)e1
WK20728 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
Proposed Revision of
D847-04
WK20753 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
Proposed Revision of
C1609/C1609M-07
WK20770 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20786 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK20807 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
Proposed Revision of
D6794-02(2007)
WK20808 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
Proposed Revision of
D6795-02(2007)
WK20827 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
Proposed Revision of
D6894-03
WK20830 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
Proposed Revision of
D4682-87(2002)
WK20831 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
Proposed Revision of
D4858-02
WK20832 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
Proposed Revision of
D4859-97(2003)
WK20833 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
Proposed Revision of
D4863-02
WK20834 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
Proposed Revision of
D7216-08
WK20838 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
Proposed Revision of
D6121-08
WK20840 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
Proposed Revision of
D4857-03
WK20863 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
Proposed Revision of
C871-08
WK20864 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
Proposed Revision of
C871-08
WK20865 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F2657-07
WK20867 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
Proposed Revision of
F137-03(2007)
WK20868 Standard Test Method for Deflection of Resilient Floor Tile
Proposed Revision of
F1304-03
WK20871 Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
Proposed Revision of
D5171-00(2006)
WK20933 Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
Proposed Revision of
C950-05
WK20949 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
Proposed Revision of
D3228-05
WK20960 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
Proposed Revision of
D1552-07
WK20979 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK21001 Size of Aggregate Used as Ballast for Single-ply Membrane Roof Systems
WK21017 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Proposed Revision of
F1446-08
WK21020 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
Proposed Revision of
C1325-08
WK21039 Standard Specification for Stainless Steel Billets and Bars for Forging
Proposed Revision of
A314-97(2002)
WK21060 Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
Proposed Revision of
D6064-03
WK21121 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2008)
Proposed Withdrawal of
C982-03
WK21132 Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
Proposed Revision of
C1456-00
WK21141 Compacted, Mineral-Insulated, Metal-Sheathed Cable used in Industrial Resistance Thermometers
WK21147 Standard Guide for Marine Vessel Structural Inspection Considerations
Proposed Revision of
F1754-97(2004)
WK21149 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
Proposed Revision of
D5278-98(2004)
WK21151 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
Proposed Revision of
D3776-07
WK21162 Standard Test Method for the Characterization of Particles from Hydrogen Fuel Streams by Scanning Electron Microscope
WK21167 Standard Terminology for Membrane Switches
Proposed Revision of
F2112-02
WK21170 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
Proposed Revision of
F2187-02
WK21171 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
Proposed Revision of
F2188-02
WK21174 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
Proposed Revision of
C1129-89(2001)
WK21178 Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
Proposed Revision of
E1715-01
WK21191 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Proposed Revision of
C231-08b
WK21196 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
WK21201 Measurement of Initiation Toughness in Surface Cracks under Tension and Bending
WK21202 Standard Test Method for Air Release Properties of Petroleum Oils
Proposed Revision of
D3427-07
WK21203 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
Proposed Revision of
F2132-01(2008)e1
WK21221 indication of early-age mechanical properties by thermal measurement.
WK21223 Precast Concrete Tanks by the Negative Air Pressure (Vacuum) Test Prior to Backfill
WK21239 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21241 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21261 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
Proposed Revision of
D7043-04a
WK21266 Standard Test Method for Recovery of Asphalt From Solution by Abson Method
Proposed Revision of
D1856-95a(2003)
WK21267 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
Proposed Revision of
D3542-92(2007)
WK21271 Standard Specification for Refined Lead
Proposed Revision of
B29-03
WK21283 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
Proposed Revision of
F2373-08
WK21285 Standard Guide for Modeling the Colorimetric Properties of a Visual Display Unit
Proposed Revision of
E1682-05
WK21305 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
Proposed Revision of
D6413-08
WK21327 the Attachment of Roof Mounted Photovoltaic Arrays on Steep- Slope Roofs
WK21341 Assessing the Uncertainty of Measurements to Determine Volatile Organic Compound Emissions from Indoor Materials/Products
WK21342 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
Proposed Revision of
F480-06b
WK21343 Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Flames Resulting from Wildfire
WK21346 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
Proposed Revision of
D6434-04
WK21350 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
Proposed Revision of
F2579-06e1
WK21353 Standard Test Methods for Fire Testing of Components and Composites of Upholstered Furniture Using Flaming Ignition Sources
WK21382 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
Proposed Revision of
D7349-08
WK21383 Fabricating Test Specimens With Self-Consolidating Concrete
WK21388 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08a
WK21389 Standard Test Method for Brinell Hardness of Metallic Materials
Proposed Revision of
E10-07a
WK21392 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
Proposed Revision of
F1111-08
WK21396 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
Proposed Revision of
F2215-05e2
WK21400 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK21423 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
Proposed Revision of
B229-04
WK21456 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
Proposed Revision of
C534/C534M-08
WK21460 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
Proposed Revision of
C1618-05
WK21461 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric]
Proposed Revision of
C1618M-05
WK21475 Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
Proposed Revision of
C1571-03
WK21484 Nuclear Surface Moisture and Density Gauge Calibration
WK21499 Custom Machine Wound Glass-Fiber-Reinforced Thermosetting Resin (Fiberglass) Corrosion-Resistant Pipe
WK21501 Standard Test Method for Burning Quality of Kerosine
Proposed Revision of
D187-94(2003)e1
WK21507 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4806-08
WK21508 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4806-08
WK21515 Standard for Qualitative Classification of Surfactants by Infrared Absorption
Proposed Revision of
D2357-74(2003)
WK21516 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
Proposed Revision of
F2471-05
WK21517 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
Proposed Revision of
F1516-03
WK21518 Standard Terminology Relating to Resilient Floor Coverings
Proposed Revision of
F141-04
WK21531 Standard Practice for Subsampling of Uranium Hexafluoride
Proposed Revision of
C1689-08
WK21542 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
Proposed Revision of
D2156-94(2003)
WK21565 Standard Specification for Fuel Oils
Proposed Revision of
D396-08a
WK21567 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
Proposed Revision of
D529-04
WK21573 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
Proposed Revision of
D4449-90(2004)
WK21579 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-08a
WK21591
Proposed Revision of
WK21616 Standard Test Method for Oxidation Induction Time of Natural Ester Insulating Fluids by Pressure (PDSC) or Regular Differential Scanning Calorimetry (DSC)
WK21626 Standard Specification for Spill Resistant Fueling Systems for Portable Fuel Containers for Consumer Use
Proposed Withdrawal of
F2234-08
WK21646 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
Proposed Revision of
D2163-07
WK21657 Characterization and Assessment of Vascular Graft Tissue-Engineered Medical Products (TEMPS)
WK21678 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
Proposed Revision of
C1005-05
WK21706 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
Proposed Revision of
D7467-08
WK21726 Standard Guide for Implementation of a Fleet Management System Network
Proposed Withdrawal of
F1756-97a(2008)
WK21737 Dual Drain Systems for Swimming Pools, Spas and Hot Tubs
WK21738 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
Proposed Revision of
C390-08e1
WK21753 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK21758 Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
Proposed Revision of
F2517-05
WK21759 Standard Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use
Proposed Revision of
F839-83(2006)
WK21780 Minimum Structural Design Loading for Precast Concrete Burial Vaults and graveliners
WK21784 Assessing Flavor of Drinking Water
WK21807 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
Proposed Revision of
F1921-98(2004)
WK21810 Integration of Climate Change Risk Management into Sustainability and Greening Programs
WK21811 Using Renewable Energy Projects on Brownfields in Climate Risk Management Strategies
WK21812 Adaptation and Mitigation for Climate Change Risk
WK21815 Evaluating Emergency Response Robot Capabilities: Manipulation: Gasping Dexterity Tasks in Confined Area Shelves : Open Access
WK21819 Evaluating Emergency Response Robot Capabilities: Energy/Power: Endurance Tasks: Confined Area Terrains: Continuous Pitch/Roll Ramps
WK21829 Calcium-Based Bone Void Fillers
WK21830 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
Proposed Revision of
E995-04
WK21836 Large Scale Germination, Vegetation Establishment and Measurement
WK21887 Evaluating the Oxidative Resistance of Polypropylene (PP) Piping and Systems to Hot Chlorinated Water
WK21901 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
Proposed Revision of
D6779-08a
WK21909 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
Proposed Revision of
E2133-03
WK21915 Practice/Guide for measurement of electrophoretic mobility and zeta potential of biological materials
WK21925 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
Proposed Revision of
A967-05e1
WK21957 Identification and quantification of lead in paint and other coatings using energy dispersive x-ray spectrometry (EDXRF)
WK21977 Standard Practice for Packaging/Packing of Plastics
Proposed Revision of
D3892-93(2003)
WK21988 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
Proposed Revision of
E2617-08a
WK21996 Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
Proposed Revision of
F355-01
WK21997 Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
Proposed Revision of
F2117-01
WK22009 Reporting Photovoltaic Non-Concentrator System Performance
WK22010 Testing Performances, Weathering and Aging of Photovoltaic Modules
WK22020 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
Proposed Revision of
D5017-96(2003)e1
WK22022 Determination of elemental composition in masterbatches and compounds by X-ray Fluorescence Spectrometry
WK22024 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Proposed Revision of
D3950-07
WK22025 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-08a
WK22026 Reinforced Thermoplastic Composite Pipe for Conveyance of Fluids Under High Pressure
WK22032 Standard Practice for Ultrasonic Examination of Steel Forgings
Proposed Revision of
A388/A388M-08
WK22033 Standard Guide for the Practice of Forensic Engineering
WK22056 Standard Practice for the Evaluation and Selection of Hotel and Meeting Accommodations related to meetings, events, conferences, conventions and trade shows.
WK22058 Evaluating the adhesion (pull off) strength of repair materials in a laboratory
WK22064 Standard Specification for Cold-Weather Admixture Systems
Proposed Revision of
C1622/C1622M-06
WK22067 Standard Test Methods for Screening of pH in Waste
Proposed Withdrawal of
D4980-89(2003)
WK22069 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
Proposed Revision of
D6712-01
WK22077 Rubber Marine Fenders
WK22116 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
Proposed Revision of
D6350-98(2003)
WK22129 Distillation of Biodiesel Products (Micro Distillation Method)
WK22130 Distillation of Biodiesel (Mini Distillation Method)
WK22138 Standard Test Method for Fretting Wear Protection by Lubricating Greases
Proposed Revision of
D4170-97(2002)e1
WK22142 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
Proposed Revision of
C769-98(2005)
WK22143 Rapid Assessment of Gamma-Ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
WK22144 Total Fluorine, Chlorine and Sulfur in Graphite and Carbon by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
WK22145 3 pt bend strength of carbon and graphite
WK22146 Proper Sample Collection, Handling and Preparation for Automatic Particle Counting
WK22149 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
Proposed Revision of
D3764-06e1
WK22155 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
Proposed Revision of
D494-04
WK22156 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
Proposed Revision of
D6645-01
WK22157 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
Proposed Revision of
D5508-94a(2001)e1
WK22163 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009)
D5524-94(2001)e1
Replacement with D6953-03
WK22176 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
Proposed Revision of
F2648/F2648M-07
WK22177 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
Proposed Revision of
E2336-04
WK22209 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK22229 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
Proposed Revision of
D5321-08
WK22244 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
Proposed Revision of
C684-99(2003)
WK22253 Evaluating Compatibility of Mixtures of Hydraulic Fluids
WK22263 Determining Enamel Holdout
WK22268 Standard Guide for Two-Sample Acceptance and Preference Testing with Consumers
WK22309 Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
WK22312 Drum and Tote Sampling of Waterborne Traffic Paint
WK22325 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-07
WK22326 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-07
WK22331 Simultaneous Determination of Oxygen, Nitrogen, and Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
WK22332 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
Proposed Revision of
D6601-02(2008)
WK22333 The Determination of Titanium Dioxide and Lead Chromate in Thermoplastic Pavement Marking Materials Using Instrumental X-ray Florescent (XRF) Techniques
WK22334 Consumer Safety for Glass Furniture
WK22343 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
Proposed Withdrawal of
E1260-03
WK22344 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
Proposed Withdrawal of
E799-03
WK22347 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-07
WK22359 Laboratory Endurance And High Speed Evaluation Of A Pneumatic Commercial Radial Truck - Bus Tire
WK22361 Standard Guide for Use of Joint Sealants
Proposed Revision of
C1193-05a
WK22372 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-08b
WK22379 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-08b
WK22382 Standard Test Methods for Evaluation of Innersprings and Boxsprings
Proposed Revision of
F1566-99(2004)
WK22393 Standard Test Methods for Mechanical Testing of Steel Products—Metric
Proposed Revision of
A1058-08
WK22394 Evaluating Paint Pad Pick Up And Release
WK22395 Filling material shedding of paint brushes
WK22406 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
Proposed Revision of
D4889-04
WK22437 Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine
Proposed Revision of
D5620-94(2004)
WK22456 Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
Proposed Revision of
D7425-08
WK22463 Standard Test Method for the Rapid Sequential Alpha Spectrometric Determination of Isotopes of Americium, Curium, Plutonium, and Uranium in Environmental Water Samples
WK22464 Standard Test Method for Energy Measurement for Dynamic Penetrometers
Proposed Revision of
D4633-05
WK22480 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
Proposed Revision of
E803-91(2008)
WK22482 Clinical Care Classification
WK22525 Standard Test Method for Prebored Pressuremeter Testing in Soils
Proposed Revision of
D4719-07
WK22558 Measuring Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings made from Them
WK22565 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
Proposed Revision of
D2239-03
WK22569 Standard Test Method for the Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation.
WK22587 Personal Protective Equipment for the Handling of Flat Glass
WK22601 Standard Test Method for Slump of Hydraulic-Cement Concrete
Proposed Revision of
C143/C143M-08
WK22607 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
Proposed Revision of
D7091-05
WK22619 Specifications for Recycled Asphalt Shingles (RAS) Derived from tear-off roofing scrap
WK22660 Fire Performance of Vented Construction Systems
WK22690 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
Proposed Revision of
F1108-04
WK22698 evaluation of paint pick-up and release of a roller cover
WK22702 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
Proposed Revision of
D6066-96(2004)
WK22705 Analysis, Interpretation and Reporting of Test Data for the Determination of Stability for Flexible Channel Liners
WK22707 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
Proposed Revision of
D6027-96(2004)
WK22714 Biodegradability of Lubricants using the Biokinetic Model
WK22761 Selecting Test Methods for Geomembrane Seams
WK22828 Determining the Flow Rate of Suspended Solids from a Geosynthetic Bag
WK22847 Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
Proposed Revision of
D7291/D7291M-07
WK22862 Standard Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials
Proposed Revision of
E338-03
WK22872 Collection of Total Airborne Fungal Spores via Inertial Impaction Methodology
WK22876 Standard Table of Body Measurements Relating to Women's Plus Size Figure Type, Sizes 14W-32W
Proposed Revision of
D6960-04
WK22879 measurement of remaining antioxidant content in in-service industrial lubricants oils by linear sweep voltammetry
WK22895 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-08d
WK22896 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Proposed Revision of
F1852-08
WK22908 Standard Specification for Solid Concrete Interlocking Paving Units
Proposed Revision of
C936-08
WK22911 DETERMINING THE AMOUNT OF DEVITRIFICATION IN A NUCLEAR WASTE GLASS AND FOR CONSTRUCTING TIME-TEMPERATURE-TRANSFORMATION (TTT) DIAGRAMS
WK22912 Laboratory Testing to Support Predictions of the Long-Term Behavior of Waste Forms Used for Geological Disposal of High-Level Radioactive Waste1
WK22933 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50-1000 uS/cm (Withdrawn 2009)
D6529-00
WK22936 Determination of Sulfur Forms in Coal by ICP-AES
WK22949 Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites Using the End-Notched Flexure (ENF) Test
WK23008 Standard Test Method for Misting Properties of Lubricating Fluids
Proposed Revision of
D3705-86(2003)e1
WK23009 Case Review of Forensic Examinations
WK23029 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
D3309-96a(2002)
WK23032 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Proposed Revision of
A792/A792M-08
WK23037 Determination of Hydraulically Applied Erosion Control Products (HECPs) Ability to Encourage Seed Germination and Plant Growth Under Bench Scale Conditions
WK23047 existing standards relating to sustainable construction materials.
WK23099 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
Proposed Revision of
C127-07
WK23100 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
Proposed Revision of
C128-07a
WK23106 Standard Specification for Molded Saddle Heat Fusion Fittings for Outside Diameter Controlled Polyethylene Pipe
WK23118 Determination of Shear Wave Velocity by Bender Element
WK23123 Standard Specification for Laboratory Weights And Precision Mass Standards
Proposed Revision of
E617-97(2003)
WK23124 Preformed Silicone Joint Seals for Bridges
WK23125 Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
Proposed Revision of
E898-88(2005)
WK23145 Standard Guide for the Document Destruction Mobile Equipment and Facilities-Safety Requirements
WK23154 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
Proposed Revision of
F2331-04e1
WK23210 Standard Test Method for pH of Peat Materials
Proposed Revision of
D2976-71(2004)
WK23220 Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
Proposed Revision of
A946-95(2004)
WK23226 MULTILAYER POLYETHYLENE-POLYAMIDE (PE-PA), POLYAMIDE-POLYETHYLENE (PA-PE), and POLYAMIDE-POLYETHYLENE-POLYAMIDE (PA-PE-PA) PIPE FOR PRESSURE-PIPING APPLICATIONS
WK23245 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
Proposed Revision of
E2121-08
WK23258 Standard Practice for Using the Fricke Reference-Standard Dosimetry System
Proposed Revision of
E1026-04e1
WK23260 Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System
Proposed Revision of
E2304-03
WK23262 Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
Proposed Revision of
F1885-04
WK23264 Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
Proposed Revision of
E386-90(2004)
WK23265 Analytical Information Markup Language
WK23275 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK23292 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK23320 Low Temperaure Fischer-Tropsch Derived Paraffinic Diesel Fuel Oils
WK23328 Standard Practice for the Collection of Settled Fungal Spores via Surface Tape-Lift Technique
WK23330 in Vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
WK23333 Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
WK23334 the Collection of Fungal Material From Surfaces by Swab
WK23356 Development of Product Category Rules for Use in Development of Environmental Declarations for Building Products and Systems
WK23367 Evaluating the Surface Durability Potential of a Pervious Concrete Mixture
WK23371 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
Proposed Revision of
D7042-04
WK23393 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
WK23397 Standard Test Method for Determination of Strontium-89 and Strontium-90 in Water by erenkov Counting
WK23402 Standard Test Method for Ductility Testing of Metallic Foil (Withdrawn 2009)
E796-94(2000)
WK23415 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
Proposed Revision of
F2720/F2720M-08
WK23424 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK23441 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Proposed Revision of
D86-08a
WK23455 Abrasion Resistance of Flexible Packaging Films
WK23458 Standard Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding
Proposed Withdrawal of
F979-86(2003)
WK23459 Standard Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages
Proposed Withdrawal of
F816-83(2003)
WK23460 Standard Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes
Proposed Withdrawal of
F1-03
WK23469 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
Proposed Withdrawal of
F1261M-96(2003)
WK23470 Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric]
Proposed Withdrawal of
F1260M-96(2003)
WK23471 Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]
Proposed Withdrawal of
F1259M-96(2003)
WK23486 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
Proposed Revision of
E1086-08
WK23495 Incorporating Sustainable Objectives Into Cleanup
WK23496 Differential pressure for a medical face mask
WK23531 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
Proposed Revision of
C1445-07
WK23556 Minimum Environmental, Social and Economic Requirements for a Building Promoting Sustainability.
WK23563 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0)
Proposed Revision of
E706-02
WK23570 Standard Terminology of Building Seals and Sealants
Proposed Revision of
C717-09
WK23572 Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System
Proposed Revision of
E2304-03
WK23579 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Proposed Revision of
C39/C39M-05e2
WK23592 Standard Practice for Estimating Application Rate of Bituminous Distributors
Proposed Revision of
D2995-99(2004)
WK23594 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08b
WK23603 Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
Proposed Revision of
C1597M-04
WK23605 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Proposed Revision of
F477-08
WK23632 Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
WK23657
Proposed Revision of
E1401
WK23663 Standard Test Method for Inspection and Verification of Thermometers
Proposed Revision of
E77-07
WK23670 Determination of Fiber Length Percentages in Hydraulically Applied Erosion Control Products
WK23671 Determination of Boron Content of Hydraulically-Applied Erosion Control Products
WK23672 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Proposed Revision of
A479/A479M-08
WK23689 Cold Food Counters
WK23690 Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements
D5535-98(2003)
Replacement with D0008
WK23696 Standard Specification for Graded Trinidad Lake Modified Asphalt Binder
Proposed Revision of
D6626-01
WK23700 Evaluating Roof Field Vent Response to Wind Blown Flame and Burning Ember Exposure
WK23711 Design of Waterproofing Details
WK23728 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK23729 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK23730 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK23731 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
Proposed Revision of
E1009-95(2006)
WK23733 Standard Guide to Assist PPE User Groups in Establishing an OSHA Compliant Respiratory Protection Program and on Respirator and PPE Selection, Use and Maintenance
WK23738 Measuring the Adhesion of Aerosol Foam Sealant
WK23739 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
Proposed Revision of
C1290-06e1
WK23755 Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
Proposed Withdrawal of
D995-95b(2002)
WK23766 Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
WK23786 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
Proposed Revision of
F1483-05
WK23787 Acrylic Dispersion Ground
WK23796 Standard Specification for Rapid Hardening Hydraulic Cement
Proposed Revision of
C1600/C1600M-08
WK23800 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
Proposed Revision of
A901-03(2008)
WK23809 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
Proposed Revision of
D7234-05
WK23815 Determination of Total Halocarbons Contained in Hydrogen and Other Gaseous Fuels
WK23816 Quantification of Mycobacterium immunogenum in Metal Working Fluids by Quantitative Polymerase Chain Reaction (PCR)
WK23817 Characterization of Smokeless Powder
WK23819 Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
Proposed Revision of
D3173-03(2008)
WK23820 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
Proposed Revision of
D3174-04
WK23821 Tunnel Fire Resistance
WK23822 Standard Test Method for Total Moisture in Coal
Proposed Revision of
D3302-07ae1
WK23823 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
Proposed Revision of
D4239-08
WK23827 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-07a
WK23835 Environmental, Operational and Logistical Requirements for Medical Equipment Used in Mass Casualty Events
WK23840 Determination of Biodiesel (Fatty Acid Methyl Esters) in Diesel Fuel Oil Using Mid Infrared Spectroscopy
WK23858 Insulated Vinyl Siding
WK23859 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
Proposed Revision of
E1618-06e1
WK23862 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
Proposed Revision of
D6098-97(2003)
WK23869 The Design, Manufacture, and Installation of Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers According to AASHTO LFD or AASHTO LRFD
WK23875 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
Proposed Revision of
C177-04
WK23882 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Proposed Revision of
F1281-07
WK23883 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
Proposed Revision of
F1282-06
WK23885 Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
WK23890 STRUCTURAL-GRADE PLASTIC LUMBER FOR OUTDOOR APPLICATIONS
WK23891 Standard Guide for PDD Examination Standards of Practice
Proposed Revision of
E2062-07
WK23896 Quantitative Research
WK23911 Assessing the Airtightness of Joints Between Air-tight Assemblies
WK23935 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
Proposed Revision of
D1599-99(2005)
WK23937 Renewal of Existing Potable Water Pipes with Polyurea and Polyurethane Linings
WK23938 Shrinkage Reducing Admixtures
WK23940 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Proposed Revision of
C518-04
WK23967 Evaluating Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
WK23968 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
Proposed Revision of
D6307-05
WK23971 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
Proposed Revision of
D4125-05
WK23975 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
Proposed Revision of
E1050-08
WK23979 Determination of Oxidation in Plastics by FT-IR analysis
WK23983 Inspection of (The Application of) Exterior Insulation and Finish Systems (EIFS) During (in) the Construction of New Non-Residential Buildings
WK23993 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
Proposed Revision of
D5589-97(2002)
WK23995 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F2019-03
WK24000 Flexible Cellular Materials Made from Polyamide Polymers
WK24020 Mixing and Installation of Hydraulically Applied Mulch and Fiber Matrix Products
WK24023 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
Proposed Revision of
D2321-08
WK24039 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09
WK24040 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09
WK24041 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
Proposed Revision of
D7083-04
WK24051 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
Proposed Revision of
D6953-03
WK24056 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
Proposed Revision of
D3124-98(2003)
WK24057 Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
WK24059 Method of Test for Biochemical Oxygen Demand of Industrial Water and Industrial Waste Water (Withdrawn 1971)
D2329-68
WK24070 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
Proposed Revision of
D5147-07b
WK24071 Determining Resistance of Roofing Systems to Simulated Hail by Impact with Propelled Ice Balls
WK24072 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
Proposed Revision of
E179-96(2003)
WK24074 Installation of Machine Spiral Wound High-Density Polyethylene (HDPE) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
WK24075 High-Density Polyethylene (HDPE) Profile Strip for Machine Spiral Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
WK24076 Maintenance of Athletic Fencing and Safety Inspection Check List
WK24085 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-09
WK24087 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
Proposed Revision of
D7467-09
WK24088 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-09
WK24089 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-09
WK24091 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-09
WK24095 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-08
WK24098 Standard Guide for Sensory Claim Substantiation
Proposed Revision of
E1958-07e1
WK24099 Calibration and Testing Unleaded Material with a minimum 100 Octane rating
WK24101 Standard Practice for Calibration of Laboratory Volumetric Apparatus
Proposed Revision of
E542-01(2007)
WK24110 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-08
WK24118 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
Proposed Revision of
D1160-06
WK24125 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
Proposed Revision of
D6459-07
WK24126 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
Proposed Revision of
D6460-07
WK24127 Fluid Transfer/Containment Components and Systems for use in Remote handled areas
WK24171 Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
WK24191 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
Proposed Revision of
A484/A484M-08
WK24199 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
Proposed Revision of
D1275-06
WK24201 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
Proposed Revision of
D5837-99(2005)
WK24202 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
Proposed Revision of
D3612-02e1
WK24205 Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
Proposed Revision of
F1892-06
WK24211 Determination of Hg Adsorption Capacity of Powdered Activated Carbons Used for Removal of Hg from Flue Gas
WK24216 Benzotriazole (BTA) and Irgamet 39 in Electrical Insulating oil by High Performance Liquid Chromatography (HPLC)
WK24217 The Determination of Copper and Copper Sulfide Deposition Using the Covered Conductor Deposition (CCD) Test
WK24220 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Proposed Revision of
F1554-07a
WK24226 Standard Consumer Safety Specification for Articles Intended to be used by Children
WK24235 Standard Test Method for Determination of Moisture Content of Hot Mix Asphalt
WK24242 Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
Proposed Withdrawal of
D1827-92(2002)e1
WK24243 Handling, Transportation, and Storage of Frozen Soil and Rock Samples
WK24244 Lateral Bend Test for Polyethylene (pe) butt fusion joints
WK24251 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
Proposed Revision of
E1557-05e1
WK24254 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
Proposed Revision of
E1557-05e1
WK24259 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
Proposed Revision of
E74-06
WK24260 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-09
WK24263 Installation Methods for Adhered Manufactured Stone Masonry Veneer Products
WK24266 Standard Specification for Gypsum Veneer Plaster
Proposed Revision of
C587-04
WK24285 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
Proposed Revision of
D3965-05
WK24290 Screws, Alloy Steel, Heat Treated, 170-ksi Minimum Tensile Strength
WK24293 Screws, Alloy Steel, Heat Treated, 1170-MPa Minimum Tensile Strength [Metric]
WK24327 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
Proposed Revision of
A340-03a
WK24332 Standard Specification for Brass Rod, Bar, and Shapes
Proposed Revision of
B927/B927M-08a
WK24334 Standard Test Method for Energy Measurement for Dynamic Penetrometers
Proposed Revision of
D4633-05
WK24335 Standard Test Method for Energy Measurement for Dynamic Penetrometers
Proposed Revision of
D4633-05
WK24336 Preparation of Frozen Soil and Rock Samples for Laboratory Testing
WK24337 Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
Proposed Withdrawal of
F616M-96(2003)
WK24338 Standard Test Method for Measuring Unsaturated TTL Sink Current
Proposed Withdrawal of
F676-97(2003)
WK24339 Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]
Proposed Withdrawal of
F1259M-96(2003)
WK24341 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
Proposed Withdrawal of
F1261M-96(2003)
WK24343 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material
Proposed Revision of
E839-05
WK24357 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
Proposed Revision of
D2167-08
WK24361 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK24364 Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
WK24374 determining Darcy permeability coefficients for porous tissue scaffolds.
WK24386 Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
Proposed Revision of
D5115-90(2004)
WK24387 Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel
Proposed Revision of
E856-83(2004)
WK24403 Stabilized Mulch Matrix
WK24404 Cementitious Fiber Matrix
WK24410 Zinc-Rich Corrosion Protection Coatings for Fasteners.
WK24421 Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array-Based Mid-Infrared Spectroscopy
WK24425 Standard Consumer Safety Specification for Toy Chests
F834-84(2008)
Replacement with F963-08
WK24427 Determining Suitability for use of Roofing materials in Cold-Weather Climates
WK24431 Standard Test Methods for Permeability of Feebly Magnetic Materials
Proposed Revision of
A342/A342M-04
WK24433 Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Withdrawn 2002)
A851-96
WK24436 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
Proposed Revision of
D6886-03
WK24443 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
Proposed Revision of
E2371-04
WK24458 Acidity of Fuel Ethanol
WK24470 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
Proposed Revision of
D7344-08
WK24471 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
Proposed Revision of
D7345-08
WK24472 Determination of Elemental Sulfur in Natural Gas Using Sulfur Chemiluminescence Detector
WK24511 Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
WK24514 Determination of Boiling Range Distribution of Hydrocarbons and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
WK24524 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
Proposed Revision of
C1285-02(2008)
WK24532 C-513 - Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for compressive StrengthStandard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength (Withdrawn 2004)
C513-89(1995)
WK24533 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
Proposed Revision of
C495-07
WK24536 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
Proposed Revision of
C1315-08
WK24538 Speciated Organic Volatile Content of Multi-Component Coatings by Gas Chromatography
WK24544 Determining Cross-Section Averaged Liquid Drop Size Characteristics in a Spray Using Laser Diffraction Instruments
WK24548 Addition of a note referencing ISO 5725-6 to ASTM D05 Precision Statements
WK24561 Measuring the Effectiveness of Self-Decontaminating Surfaces for Protective Clothing Materials
WK24567 Evaluation of Silicate-Based Liquid Floor Treatments for Use on Concrete
WK24574 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836-06
WK24578 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
Proposed Revision of
D4186-06
WK24589 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-09a
WK24593 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
Proposed Revision of
E1409-08
WK24598 Hybrid K-edge Densitometry for uranium and plutonium in solutions
WK24600 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
Proposed Revision of
D3080-04
WK24604 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
Proposed Revision of
B338-09
WK24605 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK24606 Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
WK24607 The Design and Use of Vessel-Mounted Camera Systems for Oil Spill Response
WK24609 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836-06
WK24614 Recycling Practices & Reporting Methodology
WK24618 Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
WK24621 Measurement of Aggregate Resistivity Using the Two-Electrode Soil Box Method
WK24622 the use of Foundry Sand in Bituminous Mixtures
WK24625 Standard Test Method for Determining Visual Acuity and Field of View of On-Board Video Systems for Teleoperation of Robots for Urban Search and Rescue Applications
Proposed Revision of
E2566-08
WK24630 Credentialing for Access to a Disaster Scene
WK24635 Determining the Aperture Stability Modulus of Geogrids
WK24641 Evaluation and Repair of Lock Strip Glazing Gaskets
WK24650 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
Proposed Revision of
D665-06
WK24678 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
Proposed Revision of
D6103-04
WK24680 Paired Testing
WK24685 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
Proposed Revision of
D5239-04
WK24686 Assessment of Co28Cr6Mo Metal-on-Metal and Alumina/Alumina Matrix Composite Ceramic-on-Ceramic Total Hip Replacement Devices
WK24687 the Alpha Spectrometric Determination of Radium 226 in Environmental Water Samples
WK24688 Standard Specification for Ornamental Fences Employing Vertical Steel Pales
WK24695 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
Proposed Revision of
D4609-08
WK24696 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
Proposed Revision of
D7207-05
WK24699 Training for Land SAR as a Level I Out-of-Area Disaster Responder
WK24706 Selection of Passive Technologies for Sampling Ground Water Monitoring Wells
WK24711 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
Proposed Revision of
F976-08
WK24716 Safe Design and Installation of Suction-Limiting Gravity Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools
WK24717 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
Proposed Revision of
E1721-01
WK24719 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
Proposed Revision of
D5873-05
WK24726 Generating a Product Quality Value through the Application of a Process Stream Analyzer
WK24730 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
Proposed Revision of
C769-98(2005)
WK24738 Standard Test Method for Engler Specific Viscosity of Tar Products
Proposed Withdrawal of
D1665-98(2003)
WK24745 Measuring Friction and Adhesive Wear Properties of Lubricated and Unlubricated Materials Using the Twist Compression Test
WK24748 validating measurement results for non-conforming specimen sizes obtained from Materials Test Reactor or reactor core sampling programs
WK24757
WK24784 Standard Specification for Copper Trolley Wire
Proposed Revision of
B47-95a(2007)
WK24791 Standard Specification for Ductile Iron Castings
Proposed Revision of
A536-84(2004)e1
WK24807 Strength Index of Soils by Handheld Shear Vane
WK24817 Specifying Color by the Natural Color System(NCS)
WK24827 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK24828 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK24829 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK24830 Standard Test Method for Measurement of Oxidation Drying Rate of Sheetfed Inks and Overprint Varnishes by a Manual Method
WK24833 Using Calorimetry for Emergency Relief System Design
WK24836 Active Area, Multi-Purpose Flooring
WK24841 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Proposed Revision of
C231-08c
WK24850 Student general discussion on proposed sustainability standards Please see two documents currently out for ballot in the related documents area below. If you have any comments, please send them to the group using the comment tool in the collaboration area. These proposals will be reballoted, so please offer your revisions.
WK24853 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Proposed Revision of
D6751-09
WK24854 Creation of Terminology for Sediment Control Task Group
WK24855 Classification for product reclamation, including product takeback.
WK24856 Chain of Custody
WK24858 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
Proposed Revision of
D4239-08
WK24874 The Determination of Moisture Vapor Concentration in Natural Gas and by Tunable Diode Laser Spectroscopy (TDLAS)
WK24875 On-line Determination of Siloxanes in Biogas and Other Gaseous Fuels by FTIR
WK24876 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
Proposed Revision of
C1483-04
WK24878 Assessment of Good Lab Practices in Petroleum Products and Lubricant Testing Laboratories
WK24879 Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
Proposed Revision of
C740-97(2004)
WK24893 Standard Guide for Radiographic Examination
Proposed Revision of
E94-04
WK24905 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
Proposed Revision of
E431-96(2007)
WK24906 Standard Practices for Preserving and Transporting Soil Samples
Proposed Revision of
D4220-95(2007)
WK24908 Determination of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
WK24926 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK24941 Standard Test Method for Sampling and Testing Grout
Proposed Revision of
C1019-09
WK24943 Standard Guide for Biopharmaceutical Facilities Architectural Design Considerations
Proposed Revision of
E1567-93(2001)
WK24969 Conducting Martial Arts Schools
WK24970 Blending Mid Level Ethanol Fuel Blends
WK24978 Standard Guide to Speech Recognition Technology Products in Health Care
Proposed Revision of
E2364-04
WK24979 Standard Guide for Data Capture through the Dictation Process
Proposed Revision of
E2344-04
WK25045 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-07a
WK25046 Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
WK25049 Standard Specification for Phosphor Bronze Wire
Proposed Revision of
B159/B159M-05
WK25059 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-08
WK25063 Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field- Portable X-Ray Fluorescence (XRF) Devices
WK25064 the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
WK25065 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
Proposed Revision of
E1726-01
WK25076 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
Proposed Revision of
B902-04a
WK25077 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Proposed Revision of
D6890-08
WK25079 Standard Specification for Heavy Vehicular Paving Brick
Proposed Revision of
C1272-07
WK25081 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Proposed Revision of
D6890-08
WK25095 Standard Specification for Reactive and Refractory Metal Clad Plate
Proposed Revision of
B898-05e1
WK25097 Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
WK25108 Standard Practice for Measurement of Apparent Viscosity of Asphalt-Rubber or Other High Viscosity Binders by Using a Rotational Viscotester (Field Method)
WK25110 Standard Viscosity-Temperature Chart for Asphalts
Proposed Revision of
D2493-01e1
WK25126 Recirculating Hood System for Cooking Appliances
WK25128 Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
WK25150 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
Proposed Revision of
D1169-09
WK25209 Standard Test Method for Prerinse Spray Valves
Proposed Revision of
F2324-03
WK25210 Determination of Thermal Resistance of Loose-Fill Insulation for Sidewall Applications
WK25226 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
Proposed Revision of
C227-03
WK25232 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Proposed Revision of
C618-08a
WK25294 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
Proposed Revision of
D6354-98(2008)
WK25296 Electron Beam Melting (EBM) Titanium 6Al-4V
WK25298 Standard Test Method for Total Moisture in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize with Determination of Air-Drying Loss by Microwave Oven
WK25302 Collection of Request Writing
WK25308 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
Proposed Revision of
E1190-95(2007)
WK25309 Field Strength Testing of Anchors in Concrete and Masonry Elements1
WK25362 Accelerated Life Testing of Photovoltaic Modules
WK25383 Standard Test Method for Determining Apparent Opening Size of a Geotextile
Proposed Revision of
D4751-04
WK25385 Green Roof Systems
WK25386 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
Proposed Revision of
F1807-08
WK25387 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Proposed Revision of
F1960-09
WK25388 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
Proposed Revision of
F2080-08
WK25389 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
Proposed Revision of
F2080-08
WK25390 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
Proposed Revision of
F1807-08
WK25400 Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core, the Core Containing Postconsumer Recycled ABS Plastics
WK25404 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
Proposed Revision of
F2483-05
WK25411 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
Proposed Revision of
E2093-05
WK25442 Standard Terminology Relating to Surface Imperfections on Ceramics
Proposed Revision of
F109-04(2009)
WK25458 for the analysis of Total Fluorine, Chlorine, Bromine and Sulfur in Plastics and solid waste materials by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
WK25466 Standard Terminology and Acronyms Relating to Corrosion
Proposed Revision of
NACE/ASTMG193-09
WK25467 Flexible Cellular Materials - Closed Cell Urethane Foams
WK25468 Standard Specification for Design and Performance of a Light Sport Glider
Proposed Revision of
F2564-06
WK25479 Conditioning of machines and performance metrics of metal laser sintering systems.
WK25490 E05 Long Range Plan
WK25494 Standard Terminology Relating to Manufactured Carbon and Graphite
Proposed Revision of
C709-06
WK25500 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008)
E2052-99
WK25502 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices (Withdrawn 2009)
E2119-00
WK25507 Standard Terminology Relating to Polishes and Related Materials
Proposed Revision of
D2825-02(2008)
WK25508 Standard Practices for Verification and Calibration of Polarimeters
Proposed Revision of
C1426-99(2004)
WK25515 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
Proposed Revision of
C898/C898M-09
WK25520 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
Proposed Revision of
F748-06
WK25522 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
Proposed Revision of
D4018-99(2008)
WK25529 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
Proposed Revision of
E1780-04
WK25530 Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
Proposed Withdrawal of
E1779-96a(2004)
WK25531 Control of Respiratory Health Hazards in the Wet Metal Removal Fluid Environment
WK25539 Standard Test Method for Chronic Oral Toxicity Study in Rats
Proposed Revision of
E1619-95(2003)
WK25541 Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
Proposed Revision of
E981-04
WK25567 Methods for Chemical Analysis of Silica Refractories (Withdrawn 1995)
C575-81
WK25571 Mulch Section
WK25577 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Proposed Revision of
A615/A615M-09
WK25578 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
Proposed Revision of
A706/A706M-09
WK25579 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
Proposed Revision of
A955/A955M-09
WK25580 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
Proposed Revision of
A996/A996M-09
WK25581 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-07
WK25592 Structural Renovation of Existing Lateral and Mainline Connection by Robotic Repair, Ambient Curing Resin
WK25593 Performance Testing and Assessment
WK25604 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
Proposed Revision of
E220-07a
WK25635 Additional Human Tracker Skill Levels
WK25695 Standard Guideline for Installation of Exterior Windows, Doors and Skylights in New Construction
WK25700 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
Proposed Revision of
D5504-08
WK25709 Describing Conditions Observed while Conducting Facade Inspections
WK25715 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
Proposed Revision of
D5501-09
WK25724 Standard Practice for Physical Inventory of Durable, Moveable Property
Proposed Revision of
E2132-01(2007)
WK25729 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK25734 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
Proposed Withdrawal of
D5036-99(2005)
WK25736 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
Proposed Withdrawal of
D5082-99(2005)
WK25737 Correlation of particle Measurement Instruments to Sieve
WK25738 Analysis of Titanium and Titanium Alloys by Spark-Atomic Emission / Glow Discharge-Atomic Emission Spectrometry
WK25749 Measuring Layered Materials Using Optical Microscopy of Cross-Sectional Samples
WK25757 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK25759 Determination of low levels of Phthalates in Poly(Vinyl Chloride)products
WK25760 Quantification of Fire Exposures
WK25761 for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Green Roof Systems
WK25762 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
Proposed Revision of
E2393-09
WK25797 Trace Metals in Aviation Turbine Fuel by ICP-AES
WK25809 Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mock Ups in New Construction
WK25812 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
Proposed Revision of
E2485-06
WK25814 Standard Test Method for Air Permeance of Building Materials
Proposed Revision of
E2178-03
WK25816 Standard Test Method for Air Permeance of Building Materials
Proposed Revision of
E2178-03
WK25820 Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric]
Proposed Withdrawal of
F1260M-96(2003)
WK25823 Assessing the Airtightness of Penetrations through Air-tight Assemblies
WK25838 Standard Specification for Titanium and Titanium Alloy Welded Pipe
Proposed Revision of
B862-09
WK25842 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
Proposed Revision of
D409/D409M-09
WK25844 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
Proposed Revision of
D2307-07a
WK25846 Forensic Evaluation of HMA Pavements
WK25855 Standard Specification for Application of Portland Cement-Based Plaster
Proposed Revision of
C926-06
WK25858 Anchor Systems Used for Detention Hollow Metal Vision Systems and Door Assemblies
WK25863 Standard Specification for Refined Benzene-535
Proposed Revision of
D2359-09
WK25864 Standard Specification for Nitration Grade Toluene
Proposed Revision of
D841-02(2008)e1
WK25869 Standard Specification for Refined Benzene-545
Proposed Revision of
D4734-08
WK25870 Standard Specification for Benzene for Cyclohexane Feedstock
Proposed Revision of
D5871-08
WK25874 Establishing the Efficacy of Solid, Non-Food, Contact Surfaces, as Self-Sanitizing Surfaces
WK25875 Establishing the Residual Self-Sanitizing Activity of Solid, Non-Food, Contact Surfaces
WK25876 Establishing the Continuous Reduction of Bacterial Contamination on Solid, Non-Food, Contact Surfaces
WK25881 Corrosion Test for Extended Life Coolants in Glassware
WK25882 The enumeration of halophilic and proteolytic bacteria in raceway brine, brine cured hides and skins.
WK25883 The enumeration of yeast and mold in raceway brine, brine-cured hides and skins.
WK25888 Simulated Service Corrosion Testing of Extended Service Engine Coolants
WK25889 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
Proposed Revision of
F2006-08
WK25890 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
Proposed Revision of
F2090-08
WK25896 Determining the change in performance of a Vacuum Cleaner after a Single loading of the Dirt Receptacle and Filters
WK25903 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
Proposed Revision of
F2719-09
WK25913 Acoustical Forensics
WK25935 High-Strength Materials Used in Ballistic-Resistant Applications
WK25938 Cross Reference - ASTM E41 to ISO TC48 for Glass Laboratory Apparatus
WK25943 Immunological Assay to Quantify Guayule Proteins.
WK25945 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK25952 Standard Specification for Natural Cement
C10/C10M-09
Replacement with C1157/C1157M-09
WK25957 Antimicrobial and Antiviral Agents
WK25965 Liquid Threat Sprayed on a Mannequin
WK25975 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
Proposed Revision of
D7155-06
WK25977 Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules (Withdrawn 2008)
E1596-99
WK25979 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
Proposed Revision of
D7345-08
WK25980 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Proposed Revision of
D86-09e1
WK25995 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
Proposed Revision of
D4013-09
WK26007 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
Proposed Revision of
F1387-99(2005)
WK26025 Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
WK26027 Enclosure Commissioning
WK26028 Conducting Facade Inspections for Unsafe Conditions
WK26043 General Principles of Sustainability
WK26050 Standard Test Method for Ink Absorption of Blotting Paper
Proposed Withdrawal of
D2177-99(2003)
WK26056 Standard Terminology Relating to Nuclear Materials
Proposed Revision of
C859-09
WK26062 Working Principles to Guide Standards Development
WK26063 Use of Conductive Geotextiles in Leak Location Surveys
WK26064 Hot Blowout and Thermal Cycling Performance for Polytetrafluoroethylene (PTFE) Sheet or Sheet-Like Gaskets
WK26065 AGED RELAXATION LEAKAGE ADHESION PERFORMANCE of Gaskets
WK26068 Standard Guide for General Principles of Sustainability Relative to Buildings
Proposed Revision of
E2432-05
WK26069 Liquid Applied, Two Component, Polymethyl Methacrylate (PMMA) Roof Membranes
WK26070 Testing Self-Adhesive Modied Bituminous Sheet Material
WK26071 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09
WK26072 Screening Buildings for Sulfur Corrosion
WK26073 Performance of Cook-and-Hold Ovens
WK26082 Determining the Peel Resistance of Adhesive Applied Roofing Systems
WK26083 DETERMINING THE PULLOUT RESISTANCE OF ADHESIVE APPLIED ROOFING SYSTEMS
WK26085 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK26099 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-09
WK26100 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
Proposed Revision of
E595-07
WK26102 Metrics for Initial Conditioning of Machines &/or Performance Metrics for Metal Deposition
WK26105 Material Traceability for Additive Processes
WK26106 Material Qualification for Additive Processes
WK26109 Standard Terminology Relating to Fatigue and Fracture Testing
Proposed Revision of
E1823-09b
WK26115 Water Absorption by Immersion of Thermal Insulation Materials
WK26127 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK26145
Proposed Revision of
WK26154 Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
Proposed Revision of
E1879-00(2004)e1
WK26158 Hazard Awareness for Search and Rescue Personnel
WK26172 Tension Testing of Additive Manufactured Materials
WK26174 Additively Manufactured Titanium-6Aluminum-4Vanadium Alloy
WK26179 Standard Terminology Relating to Laser Printers
Proposed Revision of
F1457-94b(2006)
WK26184 Sampling of Lead and Lead Alloys for Optical Emission
WK26195 Standard Specification for Pig Tin
Proposed Revision of
B339-00(2005)
WK26214 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
Proposed Revision of
D2444-99(2005)
WK26216 Standard Specification for Structural Silicone Sealants
Proposed Revision of
C1184-05
WK26219 Guide for Use of ASTM standards in Compliance with USP Chapter 31
WK26229 Standard Specification for Welded Stainless Steel Mechanical Tubing
Proposed Revision of
A554-08a
WK26233 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Proposed Revision of
D445-09
WK26235 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
Proposed Revision of
D7548-09
WK26241 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK26242 Compatibility of Engine Coolants and Residual Fused Flux Using Corrosion of Heat Rejecting Aluminum and Corrosion in Glassware Test Equipment.
WK26243 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
Proposed Revision of
A977/A977M-07
WK26249 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
Proposed Revision of
C474-05
WK26262 Standard for Profilograph Simulation for Airfield Pavements
WK26268 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
Proposed Revision of
D6713-01(2009)
WK26269 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
Proposed Revision of
D7293-06
WK26275 Measurement of Hydraulic Conductivity of Scrap Tires Using a Rigid Wall Permeameter
WK26291 Standard Practice for Conditioning Plastics for Testing
Proposed Revision of
D618-08
WK26296 Determination of Lead in Copper Alloys by ICP-AES
WK26300 Phenolics for Instrument Bearings
WK26301 Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
WK26305 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-09
WK26307 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-09
WK26310 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
Proposed Revision of
D6261-98(2003)
WK26311 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
Proposed Revision of
D6263-98(2003)
WK26314 Standard Specification for Polyethylene (PE) Plastic Tubing
Proposed Revision of
D2737-03
WK26321 Measurement of particle size distribution of nanomaterials in suspension by nanoparticle tracking analysis (NTA)
WK26326 Characterization and Assessment of Heart Valve Tissue Engineered Medical Products
WK26329 Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe with SI units
WK26332 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
Proposed Revision of
F2355-05a(2008)
WK26349 Selecting Tests for Determining Neurotoxicity of Materials
WK26351 Determination of the Slope in the Linear Region of a Test Record
WK26352 Sports and Recreation Facility Surface Systems Flammability
WK26353 Standard Test Methods for Measuring Adhesion by Tape Test
Proposed Revision of
D3359-09
WK26354 Standard Practice for Generic Marking of Plastic Products
Proposed Revision of
D1972-97(2005)
WK26357 Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe in SI units
WK26358 Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
WK26362 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
Proposed Revision of
D2839-05
WK26363 High Efficiency Detergent Sudsing Characteristics
WK26367 Lattice Structures
WK26379 Standard Terminology Relating to Solar Energy Conversion
Proposed Revision of
E772-05
WK26393 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
Proposed Revision of
D1203-94(2003)
WK26396 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
Proposed Revision of
A380-06
WK26405 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
Proposed Revision of
D1596-97(2003)
WK26418 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
Proposed Revision of
F136-08e1
WK26424 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
Proposed Revision of
F2063-05
WK26433 Directed Energy Deposition Additive Manufacturing Technologies
WK26441 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
Proposed Revision of
A924/A924M-09
WK26442 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
Proposed Revision of
D2774-08
WK26444 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
Proposed Revision of
F1537-08
WK26449 Standard Practices for Infrared Multivariate Quantitative Analysis
Proposed Revision of
E1655-05
WK26451 Installing a Centrifugally Cast Concrete Pipe Liner inside Storm and Sanitary Sewer Pipes
WK26472 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
Proposed Revision of
A890/A890M-99(2007)
WK26473 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
Proposed Revision of
C1171-05
WK26485 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
Proposed Revision of
E1915-07a
WK26489
A10
WK26505 Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Water Service Pipe and Tubing
WK26533 Determining Color Differences between Color Laser Beam Printer Cartridges in Unprofiled Printers
WK26536 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
Proposed Revision of
E2339-08
WK26550 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
Proposed Revision of
A325M-09
WK26551 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
Proposed Revision of
A490M-09
WK26558 Calculation Method for custom designed, site built Masonry Heaters. One off Kachelogrundofen/Putzgrundofen (tiled/mortared stoves)
WK26560 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
Proposed Revision of
D5985-02(2008)
WK26565 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D4434/D4434M-09
WK26568 In-Field Tensile Testing of Polyethylene (MDPE and HDPE) Butt-Fused Joints
WK26571 the Determination of Water Immersion Compressive Heat Resistance (WICHR) of Protective Clothing Systems
WK26581 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
Proposed Revision of
E2618-09
WK26593 Gas Phase Flare Gas Flow Metering
WK26595 Roof System Durability
WK26596 Roof System Life Cycle Assessment
WK26598 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
Proposed Revision of
D7445-09
WK26599 Design of Sustainable, Low-Slope Roofing Systems
WK26605 Installation of Nonmetallic Plaster Bases (Lath) Used with Portland-Cement-Based Plaster
WK26606 Digital radiography for medical implants
WK26609 Nonmetallic Plaster Bases (Lath) Used with Portland-Cement-Based Plaster
WK26619 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
Proposed Revision of
C42/C42M-04
WK26624 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Proposed Revision of
D664-09
WK26627 Evaluating Properties for Water Absorption, Water Vapor Transmission and Chloride Ion Intrusion of Sealers & Coatings used on Concrete
WK26629 Measuring Nonvolatile Residue Dry Contact Transfer in Polymer Materials
WK26641 Standard Test Method for Ignition Loss of Cured Reinforced Resins
Proposed Revision of
D2584-08
WK26648 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Proposed Revision of
D3350-08
WK26668 Standard Test Method to Quantify the Bonding Capacity of Steel Strand, Uncoated Seven-Wire for Prestressed Concrete.
WK26669 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-07
WK26676 Standard Test Method for Acid and Base Number by Color-Indicator Titration
Proposed Revision of
D974-08
WK26678 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
Proposed Revision of
D6941-05e1
WK26698 Standard Practice for Reducing Samples of Aggregate to Testing Size
Proposed Revision of
C702-98(2003)
WK26700 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
Proposed Revision of
D4161-01(2005)
WK26705 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
Proposed Revision of
D7313-07a
WK26719 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
Proposed Revision of
D7322-07
WK26721 Metal Injection Molded Titanium-6Aluminum-4Vanadium Net or Near Net Parts for Surgical Implant Applications.
WK26724 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
Proposed Revision of
D7208-06
WK26741 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
Proposed Revision of
D6816-02
WK26744 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
Proposed Revision of
D4460-97(2005)
WK26745 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
Proposed Revision of
D6607-00(2005)
WK26754 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
Proposed Revision of
D945-06
WK26774 Sampling Bituminous Paving Material from a Truck by Means of a Mechanical Sampling Device
WK26788 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
Proposed Revision of
D6667-04
WK26789 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
Proposed Revision of
E1355-05a
WK26791 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
Proposed Withdrawal of
D6991-05
WK26792 the identification of restricted substances in plastic and polymer materials
WK26798 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
Proposed Revision of
B855-06
WK26800 Asphalt Mixture Shear Measurement by the Gyratory Pressure Distribution Analyzer GPDA Method
WK26813 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
Proposed Revision of
F1790-05
WK26816 Determining the Susceptibility of Bituminous Mixtures to Fatigue or Reflective Cracking Using the Overlay Tester
WK26823 Standard Guide for Recycled Aggregates As Unbound Roadbase
WK26824 Standard Specifications for Recycled Asphalt Pavement Materials for Base or Subbase for Highway or Airports
WK26828 Utilization of Commercially Available Calibration Solutions for test methods
WK26829 Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for tention Applications1
F1916-98
WK26830 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Proposed Revision of
C955-09a
WK26851 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
Proposed Revision of
E2323-04
WK26854 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
Proposed Revision of
E2269-05
WK26869 Standard Test Method for Flow Rate of Metal Powders
Proposed Revision of
B213-03
WK26874 Minimum Geospatial Data for Representing Coal Spoil and Refuse Structures
WK26875 Minimum Geospatial Data for Postmining Land Uses
WK26877 Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
WK26885 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
Proposed Revision of
D5619-00(2005)
WK26896 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device Using Site-Specific Soil
Proposed Revision of
D5141-09
WK26898 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
Proposed Revision of
F2562/F2562M-08
WK26907 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
Proposed Revision of
D4378-08
WK26926 Standard Terminology of Masonry
Proposed Revision of
C1232-09a
WK26927 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-08
WK26941 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D4434/D4434M-09
WK26945 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
Proposed Revision of
F2026-08
WK26949 Determining pick-up velocity in dilute-phase pneumatic conveying
WK26951 Field Measurement of Performance Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
WK26952 Standard Specification for Cast and Sintered Alnico Permanent Magnets
WK26953 Neodymium-Iron-Boron (NdFeB) Permanent Magnets
WK26954 Standard Specification for Samarium-Cobalt (SmCo) Permanent Magnets
WK26955 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
Proposed Revision of
D4739-08e1
WK26956 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
Proposed Revision of
C1254-99(2005)
WK26958 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)
Proposed Revision of
F2363-06
WK26967 For Evaluating Cleaning Performance of Products Intended for Use on Kitchen Surfaces Found in the Home.
WK26973 Standard Test Method for Salts in Crude Oil (Electrometric Method)
Proposed Revision of
D3230-09
WK26974 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK26981 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
Proposed Revision of
C1707-09
WK27000 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
Proposed Revision of
C696-99(2005)
WK27013 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK27015 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
Proposed Revision of
F959M-07
WK27027 Evaluation of Travel Time Data Quality
WK27028 Evaluating Travel Time Data Quality
WK27031 Shrinkage Temperature of Wet Blue and Wet White
WK27042 Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
Proposed Revision of
F2318-04
WK27043 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
Proposed Revision of
F2319-04
WK27052 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
Proposed Revision of
E2253-08
WK27055 the Registration and Marking of Unmanned Aircraft Systems
WK27066 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
Proposed Revision of
F136-08e1
WK27075 Standard Test Method for Total Water in Cotton by Oven Evaporation Combined With Volumetric Karl Fischer Titration
WK27076 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
Proposed Revision of
D3142-05
WK27085 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
Proposed Revision of
D2872-04
WK27105 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-09c
WK27106 Digital and Multimedia Evidence Examination
WK27109 Standard Terminology Relating to Molecular Spectroscopy
Proposed Revision of
E131-05
WK27132 Effectiveness of Field Applied Water Repellent Treatments Using a Water Uptake Tube
WK27146 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
Proposed Revision of
D3549-03
WK27148 /Guide for Shelf Life on Endovascular Devices
WK27154 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-09c
WK27162 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
Proposed Revision of
F2588-07
WK27166 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
Proposed Revision of
E1349-06
WK27167 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
Proposed Revision of
G24-05
WK27169 Estimating Uncertainty of Test Results Derived from Spectrophotometry
WK27179 Non-Specular (NS32) Surface Finish on Overhead Aluminum Electrical Conductors1
WK27188 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-09a
WK27197 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
Proposed Revision of
F2132-01(2008)e1
WK27198 Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
WK27200 Alkali Resistance of Fiber-Reinforced Polymer (FRP) Matrix Composite Bars Used in Concrete Construction
WK27202 Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes
Proposed Revision of
D5637-05
WK27208 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
Proposed Revision of
D7363-07
WK27212 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
Proposed Revision of
D1075-07
WK27214 Standard Specification for Mortar for Unit Masonry
Proposed Revision of
C270-08a
WK27216 Standard Test Methods for Male Condoms Made from Polyurethane
Proposed Revision of
D6324-08
WK27220 Standard Practice for the Operation of the Tetrapod Walker Drum Tester
Proposed Revision of
D5251-05
WK27222 Designing Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channels
WK27225 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
Proposed Revision of
A955/A955M-09b
WK27233 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
Proposed Revision of
C999-05
WK27240 Standard Guide for Determination of Neptunium-237 in Soil
Proposed Revision of
C1475-05
WK27246 Eye Protective Devices for Airsoft Sports
WK27247 Designing Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability Under Wave Attack
WK27255 Glycerin Base Engine Coolant for Automobile and Light-Duty Service1
WK27256 Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
WK27257 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK27258 Standard Specifications for a Hydraulcially Applied Bonded Fiber Matrix
WK27259 Standard Specification for Hydraulically Applied Fiber Reinforced Matrix
WK27266 Standard Specification for Artists' Colored Pencils
Proposed Revision of
D6901-06
WK27268 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
Proposed Revision of
D2396-94(2004)
WK27277 Finite Element Analysis (FEA) of Nonmodular Metallic Orthopaedic Hip Implants
WK27281 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
Proposed Revision of
C1601-09
WK27282 Standard Test Method for Water Penetration and Leakage Through Masonry
Proposed Revision of
E514/E514M-09
WK27288 Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
WK27289 Nitrite-Nitrate in Water by Nitrate Reductase
WK27291 Determining the Ergonomic Impact of Protective Clothing Ensembles
WK27292 Nondestructive Assay of Special Nuclear Material Holdup Using Neutron Measurement Methods
WK27293 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
Proposed Revision of
D5882-07
WK27302 the selection of Hydraulically-applied Erosion Control Product (HECP)
WK27308 The Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
WK27311 Measurement of Cement Paste Consistency Using a Mini-Slump Cone
WK27319 Determination of effective boron-10 areal density in aluminum neutron absorbers using neutron attenuation measurements
WK27322 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
Proposed Revision of
E545-05
WK27330 Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
Proposed Revision of
E2349-09
WK27337 Pocket Penetrometer Test
WK27340 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
Proposed Revision of
D772-86(2005)
WK27347 Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
WK27352 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
Proposed Revision of
E580/E580M-09a
WK27355 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
Proposed Revision of
C173/C173M-09
WK27356 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
Proposed Revision of
C173/C173M-09
WK27357 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
Proposed Revision of
C173/C173M-09
WK27363 Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method
Proposed Withdrawal of
D5661-95(2001)
WK27364 Preparation of Oil-Based Ink Resin Solutions Using the Thermotronic II Varnish Cooker
WK27365 Methanol Number
WK27366 Accelerated storage stability of energy curable vehicles
WK27375 Definitions of key terms commonly used in selecting and describing erosion control tackifiers.
WK27380
WK27393 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
Proposed Revision of
E2194-09
WK27394 Standard Practice for Multiangle Color Measurement of Interference Pigments
Proposed Revision of
E2539-08
WK27406 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
Proposed Revision of
B768-99(2004)
WK27408 Standard Test Method for Evaluating Degree of Blistering of Paints
Proposed Revision of
D714-02(2009)
WK27409 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
Proposed Revision of
D4214-07
WK27418 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
Proposed Revision of
E1719-05
WK27420 Standard Test Method for Galling Resistance of Materials
Proposed Revision of
G98-02
WK27421 Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
Proposed Revision of
E103-84(2002)
WK27422 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-08
WK27423 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-08
WK27426 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-08
WK27433
Proposed Revision of
WK27438 Antimicrobial Medical Gloves
WK27440 Standard Guide for Examination of Altered Documents
Proposed Revision of
E2331-04
WK27443 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
Proposed Revision of
D1092-05
WK27444 Standard Specification for Shipboard Oil Pollution Abatement System
Proposed Revision of
F2283-04(2009)
WK27448 Brush Paint Application Tools
WK27449 Paint Roller Appication Tools
WK27452 Reporting Results of Weathering Tests and Coatings Defects on Paints
WK27456 Strategic Management of F37 with Respect to Light Sport Aircraft Industry Issues
WK27457 Standard Test Methods for pH of Water
Proposed Revision of
D1293-99(2005)
WK27458 Presentation of End User Labeling Information for Orthopedic Implants Used in Total Joint Arthroplasty
WK27466 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
Proposed Revision of
D5765-05
WK27467 Standard Practice for Preparation of Sediment Samples for Chemical Analysis
Proposed Revision of
D3976-92(2005)
WK27475 Standard Consumer Safety Specification for Bedside Sleepers
WK27478 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-09
WK27479 Standard Consumer Safety Specification for Bassinets and Cradles
Proposed Revision of
F2194-07ae1
WK27485 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK27504 Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments
Proposed Revision of
E2450-06
WK27505 ASTM Low-Hazard Liquid Thermohydrometers
WK27510 Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
Proposed Revision of
E958-93(2005)
WK27511 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
Proposed Revision of
F1962-05
WK27519 Standard Specification for Grout for Masonry
Proposed Revision of
C476-09
WK27522 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
Proposed Revision of
E935-00(2006)
WK27540 Axial compression test of vertical members
WK27541 Standard Guide for Indentation Examinations
Proposed Revision of
E2291-03
WK27545 Standard Specification for Free-Machining Stainless Steel Bars
Proposed Revision of
A582/A582M-05
WK27546 Acquisition Distance of Low Frequency RFID Transponders
WK27550 Performance-Graded Asphalt Binder Graded By Nonrecoverable Creep Compliance (Jnr)
WK27555 Standard Terminology of Powder Metallurgy
Proposed Revision of
B243-09
WK27562 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
Proposed Revision of
E2339-08
WK27563 Measurement of Seebeck Coefficient for Thermoelectric Materials
WK27571 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
Proposed Revision of
D2624-07a
WK27572 Elastic Properties of Textile Materials
WK27581 Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants (Withdrawn 2010)
D3912-95(2001)
WK27586 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-09
WK27589 Standard Terminology Relating to Veneer and Plywood
Proposed Revision of
D1038-83(2005)
WK27592
WK27602 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)
Proposed Revision of
D6437-05
WK27605 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols
Proposed Revision of
D4671-05
WK27610 Elemental Analysis of Biofuels
WK27612 Organizing/Training a Community/Private Sector Awareness & Preparedness Program
WK27613 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Proposed Revision of
E50-00(2005)
WK27614 the Determination of Flame Shrinkage of Flame Resistant Materials
WK27615 the Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Ciruclating Oven
WK27616 for a Product Certification Process
WK27619 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
Proposed Revision of
F405-05
WK27622 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
Proposed Revision of
D470-05
WK27664 Standard Guide for the Evaluation of New Fuels and New Fuel Additives for use in Aviation Spark-ignition Engines and Associated Aircraft Installations
WK27665 Calibration and Accuracy Verification of Wideband Infrared Thermometers
WK27666 Electrical Conductance Methods for Locating Leaks in Exposed or Covered Waterproof Membranes
WK27704
A104
WK27707 IEEE/ASTM SI 10 American National Standard for Use of the International System of Units (SI): The Modern Metric System
Proposed Revision of
SI10-02
WK27739 Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane
Proposed Revision of
D6747-04
WK27752 Laser Sintered Polyamides
WK27764 Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
Proposed Revision of
E1967-98(2003)
WK27765 Standard Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Proposed Revision of
E2330-04
WK27767 Standard Practice for Conditioning and Testing Textiles
Proposed Revision of
D1776-08e1
WK27773 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
Proposed Revision of
D3273-00(2005)
WK27781 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
Proposed Revision of
F1867-06
WK27810 Sustainability Criteria for Biomass and Biomass Products
WK27824 Standard Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2-20 (Withdrawn 2010)
D5585-95(2001)
WK27829 Minimum Communication of Marketing and Product Claims Related to Sustainable Building Products
WK27845 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-09
WK27848 Standard Specification for Grade 82 Unleaded Aviation Gasoline
Proposed Revision of
D6227-04a
WK27849 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
Proposed Revision of
D4306-07
WK27851 Evaluating Emergency Response Robot Capabilities: Manipulation: Directed Inspection Tasks in Confined Area Shelves : Open Access
WK27852 Evaluating Emergency Response Robot Capabilities: Manipulation: Door Opening and Traversal Tasks
WK27857 Standard Terminology of Packaging and Distribution Environments
Proposed Revision of
D996-04
WK27875 Establishment of Calibration Cottons for Cotton Classification Instruments
WK27876 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
Proposed Revision of
F2023-09
WK27877 Thoroughbred Horse Racing Surfaces
WK27885 REMOTE CONTROL DEVICES SHIPBOARD
WK27886 COLD IRONING
WK27887 VENTILATION OF BATTERIES SYSTEMS
WK27889 Standard Test Method for High-Strain Dynamic Testing of Piles
Proposed Revision of
D4945-08
WK27891 Standard Terminology Relating to Building and Environmental Acoustics
Proposed Revision of
C634-09
WK27892 Standard Test Method for Mechanical Cone Penetration Tests of Soil
Proposed Revision of
D3441-05
WK27894 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
Proposed Revision of
E1105-00(2008)
WK27914 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
Proposed Revision of
D2977-03
WK27935 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
Proposed Revision of
D6931-07
WK27947 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
Proposed Revision of
F1999-00(2006)
WK27949 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
Proposed Revision of
D4083-89(2007)
WK27950 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
Proposed Revision of
D7525-09
WK27957 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F1743-08
WK27964 Test method for paintability of sealants
WK27973 Environmental Performance of Medical Equipment for use on Fixed and Rotary-Wing Aircraft
WK27974 Pilots Operating Handbook for small UAS (sUAS)
WK27976 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
Proposed Revision of
D3753-05e1
WK27984 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-09b
WK27986 Rapid Screening of Human Urine for Sr-90 Contamination
WK27989 Ruggedness Requirements for HAZMAT Instrumentation
WK27990 The Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
WK27999 Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
Proposed Revision of
E516-95a(2005)
WK28004 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
Proposed Revision of
D6082-06
WK28005 the Definition of 3D Image Data Requirements Necessary to Meet Project Objectives
WK28012 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK28014 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
Proposed Revision of
D4683-09
WK28019 Selecting sUAS Launch and Recovery
WK28028 IEEE/ASTM SI 10 American National Standard for Use of the International System of Units (SI): The Modern Metric System
Proposed Revision of
SI10-02
WK28036 Chromatography
WK28047 Design and Construction of Group III small UAS
WK28049 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
Proposed Withdrawal of
D117-02
WK28053 Standard Specification for Coded Values Used in the Electronic Health Record
Proposed Revision of
E1633-08a
WK28057 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
Proposed Revision of
E1014-08
WK28069 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
Proposed Revision of
E1503-06
WK28071 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
Proposed Revision of
F1924-05
WK28072 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-09a
WK28074 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
Proposed Revision of
E840-95(2005)
WK28075 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
Proposed Revision of
D5084-03
WK28083 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
Proposed Revision of
C474-05
WK28087 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
Proposed Revision of
E685-93(2005)
WK28091 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
Proposed Revision of
D2855-96(2002)
WK28092 Standard Test Method for Gas Content of Cable and Capacitor Oils
Proposed Revision of
D831-94(2004)
WK28094 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
Proposed Revision of
C1496-09
WK28095 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Proposed Revision of
D5453-09
WK28097 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
Proposed Revision of
D3606-07
WK28098 Determining and Expressing Precision of Measurement Results as Relative Standard Deviation Utilizing DQCALC Software
WK28099 Deployable Affiliated Volunteer (DAV) Program Development
WK28102 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
Proposed Revision of
D1586-08a
WK28111 Standard Test Method for Fiber Analysis of Paper and Paperboard
Proposed Withdrawal of
D1030-95(2007)
WK28118 Standard Test Methods for Dissolved Oxygen in Water
Proposed Revision of
D888-09
WK28126 Conducting Field Maintenance of a Small Unmanned Aircraft System (sUAS)
WK28137 Minimum Training of Search and Rescue (SAR) Coordinators
WK28138 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene pressure system of metric sizes
WK28141 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
Proposed Revision of
D5771-05
WK28144 Standard Specification for Mortars for the Repair of Historic Masonry
Proposed Revision of
C1713-10
WK28149 Residual Stress Measurement by X-Ray Diffraction for Aerospace Bearing Materials
WK28152 Small Unmanned Aircraft System Command and Command and Control Links
WK28153 Measuring the minimum fluidization velocities of Geldart Group A powders and complete fluidization velocities of Geldart Group B powders
WK28154 Measuring caking strength of powders and other bulk solids
WK28155 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
Proposed Revision of
F2723-08
WK28180 Standard Test Method for Load Testing Refractory Shapes at High Temperatures
Proposed Revision of
C16-03(2008)e1
WK28181 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
Proposed Revision of
C133-97(2008)e1
WK28186 Selecting Softball/Baseball Playing Field Facility Components Formerly (WK12692)
WK28190 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
Proposed Revision of
F568M-07
WK28192 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
Proposed Revision of
D5778-07
WK28198 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
Proposed Revision of
G48-03(2009)
WK28202 Standard Specification for Application of Portland Cement-Based Plaster
Proposed Revision of
C926-06
WK28203 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK28206 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
Proposed Revision of
E110-10
WK28207 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
Proposed Revision of
F1717-09
WK28214 Fretting and Corrosion Testing of Modular Femoral Heads on Hip Stem Tapers
WK28226 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
Proposed Revision of
C1714/C1714M-09
WK28230 Determination of Total Cycloparaffins and Total Aromatics in Synthetic Paraffinic Kerosene Fuels by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection
WK28231 Elbow Prosthesis
WK28244 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
Proposed Revision of
E2371-04
WK28248 Design and Performance of Group 1 sUAS
WK28249 Design, COnstruction, and Test of a Group II SmallUnmanned Aircraft System (sUAS)
WK28253 Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
WK28254 The Determination of the Storage Modulus and Flow Point Stress of Lubricating Greases Using an Oscillatory Amplitude Sweep Technique
WK28259 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
Proposed Revision of
D3244-07a
WK28261 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
Proposed Revision of
E322-96(2004)
WK28264 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by the Inert Gas Fusion Thermal Conductivity Method1
WK28269 The Analysis of Cast Iron by X-ray Fluorescence Spectrometry (Performance Based Method)
WK28275 Assessing Environmental Performance Improvements of Electric Power Generation Facilities and Infrastructure
WK28276 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
Proposed Revision of
E2050-99(2004)
WK28277 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration
Proposed Revision of
E815-04
WK28278 Standard Test Method for Determination of Phosphorus in Iron Ores by the Phosphometric Method
Proposed Revision of
E1070-00(2005)
WK28282 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration
Proposed Revision of
E316-00(2005)
WK28283 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration
Proposed Revision of
E465-00(2005)
WK28285 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
Proposed Revision of
E738-00(2005)
WK28286 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
Proposed Revision of
E878-01(2005)
WK28289 Design, Operation, Inspection and Maintenance of Oil Spill Response Vessels (OSRV)
WK28294 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectroscopy
Proposed Revision of
E841-04
WK28302 The determination of cleaning efficacy of hard surface cleaning wipes.
WK28303 Standard Practice for Data Collection for Sustainability Assessment of Building Products
Proposed Revision of
E2129-05
WK28305 Identification Marking of Copper and Copper Alloy Mill and Foundry Products
WK28307 Standard Consumer Safety Specification for Non-Powered Scooters
Proposed Revision of
F2264-09a
WK28309 Image Processing
WK28312 for Quantitation of Powder on Dental Dams
WK28313 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence
Proposed Revision of
D7184-07
WK28318 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
Proposed Revision of
D5385-93(2006)
WK28320 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
Proposed Revision of
D5602-98(2006)
WK28321 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
Proposed Revision of
D5635-04a
WK28325 Estimating Inhalation Exposure Concentrations in Low-rise Residential Buildings Resulting from Volatile Organic Compounds Emitted by New Building Products and Furnishings and from Use of Consumer Products
WK28327 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Green Roof Systems
Proposed Revision of
E2396-05
WK28328 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems
Proposed Revision of
E2398-05
WK28329 Standard Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems
Proposed Revision of
E2397-05
WK28333 Determining Airtightness of Large and Multi-zone Buildings Using an Orifice Blower Door
WK28337 Committee Bylaws
WK28338 Standard Specification for Aviation Turbine Fuels
Proposed Revision of
D1655-09
WK28346 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
Proposed Revision of
F2023-09
WK28348 Determination of Hydrogen in Steel, Nickel, and Cobalt Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
WK28349 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Proposed Revision of
D86-09e1
WK28350 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
Proposed Revision of
D2892-05
WK28353 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
Proposed Revision of
D7344-08
WK28357 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-08
WK28362 Standard Specification for the Design and Performance of a Ground Based Sense and Avoid System
WK28363 Standard Digital Reference Images for Inspection of Aluminum Castings
Proposed Revision of
E2422-05
WK28364 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
Proposed Revision of
E2445-05
WK28365 Standard Practice for Classification of Computed Radiology Systems
Proposed Revision of
E2446-05
WK28387 Traditional Artists Oil and Resin-Oil Paints
WK28388 Traditional Artists Watercolor Paints
WK28395 Determination of Hydrogen in Aluminum and Aluminum Alloys by the Inert Gas Fusion Thermal Conductivity Method1
WK28396 Standard Specification for Application and Finishing of Gypsum Board
Proposed Revision of
C840-08
WK28405 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
Proposed Revision of
E1012-05
WK28421 Standard Specification for Industrial and Commercial Swing Gates
Proposed Revision of
F900-05
WK28425 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-09
WK28428 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK28429 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
Proposed Revision of
C1441-04
WK28445 Zinc-Aluminum (Hot-Dip) Coatings on Iron and Steel Products
WK28454 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-09
WK28455 Assessment of Continued Applicability of Fire Test Reports
WK28465 In vitro to assess anti-viral efficacy of medical gloves against transmission of pathogens during a simulated puncture
WK28466 Standard Method for 5-DAY BIOCHEMICAL OXYGEN DEMAND OF WATER
WK28468 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-09b
WK28473 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
Proposed Revision of
D2121-07
WK28474 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
Proposed Revision of
E2556/E2556M-09
WK28482 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
Proposed Revision of
D2872-04
WK28485 Standard Practice for Assessment of Certification Programs for Environmental Professionals: Accreditation Criteria (Withdrawn 2007)
E1929-98
WK28487 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-09
WK28488 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-09a
WK28492 Standard Terminology for Property and Asset Management
Proposed Revision of
E2135-07e1
WK28493 Standard Practice for Equipment Management Process Maturity (EMPM) Model
Proposed Revision of
E2452-05e1
WK28494 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
Proposed Revision of
F2736-10
WK28496 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Proposed Revision of
A403/A403M-09
WK28497 Preparing Consumer Electronic Devices (CEDs) Containing Liquid Crystal Displays (LCDs) For Waste-Leaching Tests
WK28498 Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
Proposed Revision of
E2385-04
WK28499 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
Proposed Revision of
E2141-06
WK28500 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
Proposed Revision of
D2983-09
WK28501 Applying Aerosolized Bacillus Spores to Surfaces
WK28502 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
Proposed Revision of
D5133-05
WK28503 Aerosolizating and Sampling of microbial agents
WK28504 Selection of Waterproofing Membranes for Green Roofs
WK28514 Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
Proposed Revision of
D3856-95(2006)
WK28519 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
Proposed Revision of
C1374-03(2009)
WK28528 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
Proposed Revision of
B687-99(2005)e1
WK28537 Asbestos Fiber Presence in Vermiculite as Determined by Transmission Electron Microscopy Direct Transfer(TEM)
WK28538 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
Proposed Revision of
D5374-93(2005)
WK28548 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
Proposed Revision of
D3835-08
WK28552 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Proposed Revision of
D445-09
WK28558 Sizing and Counting Particulates in Light and Middle Distillate fuels, Using Off-line and On-line Particle Counters
WK28559 Assessment of Metal-on-Metal Total Hip Replacement Devices
WK28561 Airborne Carbon Nanotube Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
WK28563 Standard Practice for Determining Surface Temperature of Molds for Plastics
Proposed Revision of
D957-06
WK28564 Standard Terminology Relating to Declarable Substances in Materials
Proposed Revision of
F2576-09
WK28565 Collection of Culturable Airborne Fungi by inertial impaction systems
WK28567 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
Proposed Revision of
D495-99(2004)
WK28568 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
Proposed Revision of
D2303-97(2004)
WK28569 Standard Test Method for Performance Testing of Excess Flow Valves
Proposed Revision of
F1802-04
WK28572 The enumeration of proteolytic bacteria on fresh (uncured) hides and skins
WK28573 The enumeration of yeast and mold on fresh (uncured) hides and skins
WK28575 Sampling and Analysis of Asbestos
WK28578 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
Proposed Withdrawal of
D3525-04
WK28580 Livestock Meat and Poultry Marketing Claims
WK28587 Tacticity Index Measurements Of Polypropylene by Time Domain Magnetic Resonance (TD-NMR)
WK28596 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
Proposed Revision of
F714-08
WK28601 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
Proposed Revision of
E2148-06
WK28604 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
Proposed Revision of
C1423-98(2003)
WK28606 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
Proposed Revision of
D4976-06
WK28607 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
Proposed Revision of
D6474-99(2006)
WK28608 Demonstrating Capability to Comply with USP Test for Uniformity of Dosage Units
WK28618 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
Proposed Revision of
C665-06
WK28621 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
Proposed Revision of
C1714/C1714M-09
WK28623 Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
WK28624 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836/C836M-10
WK28626 Central Vacuum Hose Inlet Valve Socket Dimensions1
WK28627 Laboratory Determination on the Reduction of Lightness or Solar Reflectivity or Both of Light-Colored Roofing Materials
WK28628 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK28631 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
Proposed Revision of
D5587-08
WK28636 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK28639 Standard Specification for Naval Brass Rod, Bar, and Shapes
Proposed Revision of
B21/B21M-06
WK28645 Standard Test Method for Distillation of Emulsified Asphalt
Proposed Revision of
D6997-04
WK28646 Standard Terminology Relating to Electrical Insulation
Proposed Revision of
D1711-08
WK28647 Single Tube Extraction Method (STEM) for Sporicidal Fumigants and Liquid Disinfectants
WK28652 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
Proposed Revision of
D412-06ae2
WK28654 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Proposed Revision of
F439-09
WK28655 Standard Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic)
Proposed Revision of
D4856-99(2004)
WK28656 Standard Classification System for Liquid Crystal Polymers (LCP)
Proposed Revision of
D5138-06
WK28665 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
Proposed Revision of
A757/A757M-00(2004)
WK28668 Loose-fill Rubber for Use as a Playground Safety Surface Under and Around Playground Equipment1
WK28683 Site to facilitate ASTM work related to the ICC International Green Construction Code (IgCC).
WK28684 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
Proposed Revision of
D543-06
WK28688 Standard Practice for Fabrication of Fiberboard Shipping Boxes
Proposed Revision of
D5118/D5118M-05ae1
WK28694 Type A Durometer Hardness Testing of Road-Marking Materials at Elevated Temperatures
WK28696 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-10
WK28698 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-10
WK28699 Standard Specification for Mineral Fiber Roof Insulation Board
Proposed Revision of
C726-05e1
WK28703 Test Method for Determination of Moisture in Plastics by Loss in Weight
Proposed Revision of
D6980-09
WK28712 Determining Wear Resistance of Ceramic Tile via the Neel Method
WK28713 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK28716 Long-Term Evaluation of Thermoplastic Pipe Joints
WK28731 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
Proposed Revision of
C1577-10
WK28735 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
Proposed Revision of
D5478-09
WK28736 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-09
WK28737 Electrical Overhead Conductor Code Word Names
WK28739 Electron Beam Melting (EBM) Titanium 6Al-4V, Hot Isostatic Pressed Optional or As Specified
WK28740 Electron Beam Melting (EBM) Titanium 6Al-4 V ELI, Hot Isostatic Pressed Optional or When Spedified
WK28741 Electron Beam Melting (EBM) Titanium 6Al-4 V ELI
WK28744 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
Proposed Revision of
F561-05a
WK28745 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
Proposed Revision of
F2737-10
WK28746 Design, Construction, Maintenance, Use, and Safety of Ice Hockey Rinks
WK28748 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Proposed Revision of
D6751-09a
WK28758 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
Proposed Revision of
D6822-02(2008)
WK28759 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
Proposed Revision of
D1657-02(2007)
WK28760 durability and reliability issues of glass and coated glass used in solar energy products.
WK28762 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
Proposed Revision of
D1176-98(2008)
WK28763 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
Proposed Revision of
D287-92(2006)
WK28764 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
Proposed Revision of
D1298-99(2005)
WK28765 Standard Specification for Solder Metal
Proposed Revision of
B32-08
WK28766 Standard Specification for Refined Anode Grade Lead
WK28776 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
Proposed Revision of
D6130-97a(2009)
WK28778 Determination of Friction Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator
WK28779 Single Tube Extraction Method (STEM) for Sporicidal Fumigants and Liquid Disinfectants
WK28780 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
Proposed Revision of
F2033-05
WK28781 Standard Specification for Flat Glass
Proposed Revision of
C1036-06
WK28782 Standard Specification for Architectural Flat Glass Clad Polycarbonate
Proposed Revision of
C1349-04
WK28783 Pre-clinical in vivo evaluation of TEMPs for use in rotator cuff repair
WK28784 Use of Statistics in the Evaluation of Instrumental Analytical Data
WK28787 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
Proposed Revision of
B831-05
WK28803 Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus
Proposed Revision of
E1676-04
WK28814 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress at Low Temperature
Proposed Revision of
D7150-05
WK28816 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
Proposed Revision of
D6802-02
WK28823 Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
Proposed Revision of
D167-93(2004)e1
WK28824 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
Proposed Revision of
D5263-93(2008)
WK28840 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants
Proposed Revision of
F2624-07
WK28841 Durability testing of non-articulating intervertebral disc prostheses
WK28844 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
Proposed Revision of
B841-99(2009)
WK28845 Standard Specification for Electrodeposited Coatings of Tin
Proposed Revision of
B545-97(2009)
WK28850 the Measurement of Surface pH of Concrete Floor Slabs.
WK28851 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
Proposed Revision of
C1583/C1583M-04e1
WK28852 Pre-clinical in vivo evaluation in critical size metaphyseal bone defects
WK28853 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1018/A1018M-09
WK28854 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
Proposed Revision of
A635/A635M-09b
WK28855 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
Proposed Revision of
E1179-07
WK28856 Corrugated Steel Reinforced Manhole Structures
WK28857 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
Proposed Revision of
A510-08
WK28858 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
Proposed Revision of
A752-04(2010)
WK28859 Standard Guide for Expression of Temperature
Proposed Revision of
E1594-06
WK28863 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
Proposed Revision of
D1635-00(2006)
WK28866 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
Proposed Revision of
D4223-99(2006)
WK28868 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
Proposed Revision of
D6276-99a(2006)e1
WK28872 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
Proposed Revision of
E238-84(2008)
WK28876 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
Proposed Revision of
D1248-05
WK28879 Chemical Analysis of Pig Lead by Instrumental Analysis
WK28880 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
Proposed Revision of
E1560-06
WK28882 Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
Proposed Revision of
F1820-97(2009)
WK28883 Environmental Fatigue Testing of Acetabular Devices for Total Hip Replacement
WK28886 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
Proposed Revision of
A841/A841M-03a(2007)
WK28887 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
Proposed Revision of
A414/A414M-10
WK28888 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
Proposed Revision of
D6780-05
WK28890 In vitro mineralization
WK28891 Standard Terminology Relating to Resilient Floor Coverings
Proposed Revision of
F141-08a
WK28892 Standard Specification for Aluminum-Alloy Sand Castings
Proposed Revision of
B26/B26M-09
WK28893 Standard Specification for Aluminum-Alloy Permanent Mold Castings
Proposed Revision of
B108/B108M-08
WK28900 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
Proposed Revision of
A307-07b
WK28902 Crystalline Phase Quantification of calcium phosphates, calcium sulphates, and calcium carbonates by X-ray Diffraction
WK28904 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
Proposed Revision of
D5947-06
WK28905 Evaluation of the Solubility of Calcium Phosphate Granules, Fabricated Forms, and Coatings
WK28908 Platelet Leukocyte Count--An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials
WK28911 Standard Test Method for Explosibility of Dust Clouds
Proposed Revision of
E1226-10
WK28912 Standard Test Method for Expansion Index of Soils
Proposed Revision of
D4829-08a
WK28919 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
Proposed Revision of
F2096-04
WK28928 Measuring Bulk Density and Mass per Unit Area of Dusts
WK28933 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
Proposed Revision of
B891-98(2004)
WK28936 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
Proposed Revision of
D7027-05e1
WK28938 Whole Building LCA
WK28939 Laboratory Mix Design for Soil Stabilization with Fly Ash
WK28940 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
Proposed Revision of
D3505-96(2006)
WK28941 Determination of Strontium Concentration in Gypsum by Field Portable X-Ray Fluorescence
WK28944 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
Proposed Revision of
E1488-09
WK28948 /Guide for Use of Fluorescent Materials for Tagging Cells
WK28953 Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposist Stress Analyzer Method)
WK28960 Measurement of Bulk Resisivity in Powders
WK28961 Standard Specification for Nitration Grade Toluene
Proposed Revision of
D841-10
WK28963 Total Moisture in Coke
WK28964 Establishing Sampling Density Units for Computer-Vision-Based Laser Pipe-Profiling Robots
WK28965 Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
Proposed Revision of
D6172-98(2004)
WK28966 Standard Test Method for Expansion Index of Soils
Proposed Revision of
D4829-08a
WK28968 Flanged Steel U-Channel Posts
WK28971 Standard Specification for Metal, Expanded, Steel
Proposed Revision of
F1267-07
WK28974 A Standard File Format For the Submission and Exchange of Data on Nanomaterials and Characterizations
WK28980 Masonry Chimney Repair & Resurfacing
WK28987 Eddy Current Detection of Surface Cracks
WK28988 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
Proposed Revision of
E2181/E2181M-06e1
WK28994 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
Proposed Revision of
D6499-07
WK28995 the Minimum Safety Requirements for the Investigation of Incidents/Accidents in the Railroad Industry
WK29003 Standard Specification for Benzene for Use with Zeolite Based Catalysts
Proposed Revision of
D7124-08
WK29005
Proposed Revision of
WK29006 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
Proposed Revision of
D7185-08
WK29007 Standard Practice for Spacecraft Hardware Thermal Vacuum Bake-outs
WK29010 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
Proposed Revision of
D4811-06
WK29011 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
Proposed Revision of
D409/D409M-09a
WK29012 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-08e1
WK29017 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A957/A957M-09a
WK29018 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
Proposed Revision of
A985/A985M-08
WK29020 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
Proposed Revision of
A703/A703M-08a
WK29021 Tennis Court Playing Areas and Safety Zones
WK29032 Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheresres
WK29034 Examination of the Composite Overwrap in Filament Wound Pressure Vessels Used in Aerospace Applications by Nondestructive Testing
WK29042 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-10
WK29044 Standard Practice for Estimating Critical Surface Tensions
Proposed Revision of
D7541-09
WK29045 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-10
WK29046 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
Proposed Revision of
D1653-03(2008)
WK29057 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
Proposed Revision of
A796/A796M-06
WK29061 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
Proposed Revision of
D5062-09
WK29066 Standard Test Method for Relative Mileage of News Ink on Newsprint
Proposed Revision of
D7189-05
WK29067 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
Proposed Revision of
F68-10
WK29068 Examination of the Metallic Thin-Walled Liners in Filament Wound Pressure Vessels Used in Aerospace Applications by Nondestructive Testing
WK29075 Standard Specification for Application of Gypsum Sheathing
Proposed Revision of
C1280-09
WK29081 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
Proposed Revision of
D6323-98(2003)
WK29083 A Global Forum for Civil Aviation Authority Coordination on LSA Issues
WK29085 Helmet Shop Practices
WK29092 Standard Terminology for Nondestructive Examinations
Proposed Revision of
E1316-10a
WK29093 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
Proposed Revision of
D2487-10
WK29097 Temporary Fence Applications for Construction Sites
WK29100 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
Proposed Revision of
D5969-08
WK29130 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
Proposed Revision of
A531/A531M-91(2006)
WK29131 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
Proposed Revision of
A745/A745M-94(2009)
WK29134 Hydraulically-applied Erosion Control Product (HECP)
WK29144 Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
Proposed Revision of
C1295-05
WK29145 Guide for the Evaluation of Dry Shake Hardeners
WK29163 Standard Test Methods for Tensile Testing of Aramid Yarns
Proposed Revision of
D7269-08
WK29166 Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
Proposed Revision of
F1295-05
WK29173 Standard Specification for Mortars for the Repair of Historic Masonry
Proposed Revision of
C1713-10
WK29174 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
Proposed Revision of
D7001-06
WK29178 Protective Clothing Material Resistance to Sharp-tipped (Blade) Puncture
WK29183 for D19 and D34 Committee Merger
WK29190 Standard Practice for Sampling Bituminous Materials
Proposed Revision of
D140/D140M-09
WK29191 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
Proposed Revision of
D5101-01(2006)
WK29192 Chip Retention in Bituminous Surface Treatments
WK29196 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
Proposed Revision of
A352/A352M-06
WK29198 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
Proposed Revision of
D5260-04
WK29199 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
Proposed Revision of
D4495-00(2005)
WK29201 Flexural Rigidity of Geogrids, Geotextiles, and Related Products
WK29203 Rethermalization Ovens
WK29206 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836/C836M-10
WK29207 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
Proposed Revision of
D5520-94(2006)e1
WK29208 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
Proposed Revision of
D5918-06
WK29209 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
Proposed Revision of
D7300-06
WK29210 Standard Practice for Strain-Controlled Fatigue Testing
Proposed Revision of
E606-04e1
WK29212 Hardened Density of Pervious Concrete
WK29213 Compressive Strength of Pervious Concrete
WK29215 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
Proposed Revision of
C1313/C1313M-10
WK29217 Standard Practices for the Measurement of Radioactivity
Proposed Revision of
D3648-04
WK29218 Standard Test Method for Beta Particle Radioactivity of Water
Proposed Revision of
D1890-05
WK29219 Standard Test Method for Alpha Particle Radioactivity of Water
Proposed Revision of
D1943-05
WK29220 Standard Practice for Alpha-Particle Spectrometry of Water
Proposed Revision of
D3084-05
WK29222 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
Proposed Revision of
C1662-07
WK29225 Standard Guide for design and execution of sensory-instrumental correlation studies
WK29228 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
Proposed Revision of
E2301-03
WK29229 Standard Practice for Certification of Pilots, Visual Observers, Instructor Pilots, and Training Courses for Small Unmanned Aircraft System (sUAS)
WK29237 the design calculations of close-fit liners
WK29242 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
Proposed Revision of
E2353-06
WK29245 Standard Test Method for Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
Proposed Revision of
D7237-06
WK29249 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
Proposed Withdrawal of
D6611-00(2007)
Replacement with None
WK29250 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
Proposed Revision of
F964-09
WK29253 Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
Proposed Revision of
D865-99(2005)
WK29254 Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
Proposed Withdrawal of
F595-01(2005)
Replacement with F450-09
WK29256 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
Proposed Withdrawal of
C1137-05
Replacement with None
WK29257 Standard Test Methods for Rubber Products-Chemical Analysis
Proposed Revision of
D297-93(2006)
WK29258 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
Proposed Revision of
F1249-06
WK29264 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
Proposed Revision of
D5199-01(2006)
WK29269 Standard Test Methods for Constituent Content of Composite Materials
Proposed Revision of
D3171-09
WK29275 Homeland Security Applications
WK29277 Flexural Fatigue Properties of Plastics
WK29278 Uniaxial Fatigue Properties of Plastics
WK29280 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
Proposed Revision of
C1577-10
WK29283 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Proposed Revision of
E23-07ae1
WK29284 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Proposed Revision of
A53/A53M-07
WK29285 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10
WK29288 Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
Proposed Revision of
C272-01(2007)
WK29291 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
Proposed Revision of
C1433-10
WK29292 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
Proposed Revision of
C1433M-10
WK29293 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
Proposed Revision of
C1577-10
WK29294 Measurement of Gases Present or Generated During Fire Tests Using Fourier Transform Infrared (FTIR) Spectroscopy
WK29296 Standard Specification for Blended Supplementary Cementitious Materials
Proposed Revision of
C1697-10
WK29297 Safety Requirements for Railroad Construction, Maintenance, and Demolition
WK29298 Cold Formed Carbon Structural Steel Tubing Made From Precoated Sheet Steel
WK29302 Cure Behavior of Thermosetting Resins on Fibers by Dynamic Mechanical Procedures Using an Encapsulated Specimen Rheometer
WK29304 Selection of Roofing/Waterproofing Membrane Systems for Vegetative (Green) Roof Systems
WK29320 Digital Contact Thermometers
WK29322 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
Proposed Revision of
E608/E608M-06
WK29324 Weathering of Coal Overburden in a Column
WK29325 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
Proposed Revision of
E2551-07
WK29329 Standard Test Method for Distortion of Yarn in Woven Fabrics
Proposed Withdrawal of
D1336-07
Replacement with None
WK29331 Methods of Sampling Ferro-Alloys (Withdrawn March 1939)
A103-27
WK29332
A114
WK29336 Standard Terminology Used with Ion-Selective Electrodes
Proposed Revision of
D4127-06
WK29338 Standard Test Method for Rubber Chemicals—Density
Proposed Revision of
D1817-05
WK29341 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
Proposed Revision of
D6737-01(2006)
WK29351 ISO TC 160 Repository
WK29353 Fly Ash Masonry Units
WK29376 Protection from Formosan Termites
WK29379 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
Proposed Revision of
D5778-07
WK29381 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
Proposed Revision of
D7423-09
WK29383 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
Proposed Revision of
F2503-08
WK29388 Typewritten Text
WK29391 Standard Practice for Application of Hose Stream
Proposed Revision of
E2226-10
WK29395 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
Proposed Revision of
B221M-07
WK29396 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
Proposed Revision of
B221-08
WK29399 Standard Test Methods for Analysis of Wood Fuels
Proposed Revision of
E870-82(2006)
WK29400 Standard Test Method for Moisture Analysis of Particulate Wood Fuels
Proposed Revision of
E871-82(2006)
WK29401 Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
Proposed Revision of
E872-82(2006)
WK29403 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
Proposed Revision of
E873-82(2006)
WK29405 Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
Proposed Revision of
E1534-93(2006)
WK29406 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
Proposed Revision of
E1358-97(2006)
WK29407 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
Proposed Revision of
D3527-07e1
WK29409 Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
WK29410 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Proposed Revision of
C1522-05
WK29411 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836/C836M-10
WK29412 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
Proposed Revision of
D6074-08
WK29413 Inductive Metallic Wear Particle Sensor for Gearbox Applications
WK29414 Standard Specification for Welded Wire Lath
Proposed Revision of
C933-09
WK29420 Standard Test Methods for Tension Testing of Metallic Materials
Proposed Revision of
E8/E8M-09
WK29463 Standard Specification for Magnesium-Alloy Sheet and Plate
Proposed Revision of
B90/B90M-07
WK29464 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
Proposed Revision of
B951-10
WK29466 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
Proposed Revision of
D1014-09
WK29468 Standard Specification for Galvanic Protection of Steel using a Nanostructured Coating of 95% Zinc
WK29480 Size Measurement of Nanoparticles Using Atomic Force Microscopy (AFM)
WK29481 Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
Proposed Revision of
D4627-92(2007)
WK29482 [ASTM Research Report supporting] Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
WK29483 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
Proposed Revision of
D7043-04a
WK29485 Determining concentration .count and sizing distribution of Solid Particles, Water and gas in Fuel . The test method will cover off-line (lab),in-line and on-line measurement .It based on Dynamic Digital imaging with a microscopic lens.
WK29489 Standard Test Method for Oil Content of Petroleum Waxes
Proposed Revision of
D721-06
WK29495 the Classification of Conventional Printing Processes
WK29496 Examination of Sequence of Intersections on Documents
WK29497 the Examination of Documents Produced with Thermal Printing Technology.
WK29498 the Minimum Requirements For Forensic Document Examination Notes
WK29500 Standard Specification for Uniform Test Methods and Frequency
Proposed Revision of
B830-97(2003)
WK29514 The measure particle concentration, particle size, shape and color in liquid paints . The method uses light microscopy and dynamic imaging with high intensity cold lighting to back illuminate a lab or continuous liquid paint slurry to determine particle characteristics
WK29531 Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
WK29532 Evaluation of Carpet Wear Associated with the Use of Household/Commercial Vacuum Cleaners and Extraction Cleaners
WK29536 Standard Test Method for Foaming Characteristics of Lubricating Oils
Proposed Revision of
D892-06e1
WK29539 Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
Proposed Revision of
E2097-00(2006)
WK29560 Perminate Gases in C2 and C3 Products by Capillary Gas Chromatography and Pulse Discharge Helium Ionization Detector
WK29562 Production Acceptance of sUAS (multi-copy production)
WK29570 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Proposed Revision of
E648-10
WK29572 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
Proposed Revision of
D2784-06
WK29573 Standard Test Method for Phosphorus in Gasoline
Proposed Revision of
D3231-07
WK29574 Multielement analysis of crude oils using ICP-AES
WK29575 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Proposed Revision of
D664-09a
WK29576 Standard Test Method for Acid and Base Number by Color-Indicator Titration
Proposed Revision of
D974-08
WK29577 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Proposed Revision of
D2896-07a
WK29578 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
Proposed Revision of
D3339-08
WK29583 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
Proposed Withdrawal of
C684-99(2003)
Replacement with None
WK29584 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
Proposed Revision of
D4761-05
WK29588 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK29596 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
Proposed Revision of
E1571-06
WK29608 Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
Proposed Revision of
C740/C740M-97(2009)
WK29609 Thermal Performance Testing of Cryogenic Insulation Systems
WK29615 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
Proposed Revision of
D1265-05
WK29630 Standard Specification for Helmets Used for Recreational Snow Sports
Proposed Revision of
F2040-06
WK29631 Probability of Detection Analysis for Manual Inspection Hit/Miss Data
WK29632 Classification of Conventional Printing Processes
WK29633 Forensic Examination of Intersections on Documents
WK29634 Examination of Documents Produced with Thermal Printing Technology
WK29635 The Minimum Requirements For Forensic Document Examination Notes
WK29636 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
Proposed Revision of
C294-05
WK29637 Assessment of Absorbable Polymeric Implants
WK29646 Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
Proposed Revision of
C1048-04
WK29655 Standard Classification for Bridge Elements and Related Approach Work
Proposed Revision of
E2103-06
WK29686 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
Proposed Revision of
D660-93(2005)
WK29687 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Proposed Revision of
C618-08a
WK29688 Cleaning Architectural Flat Glass
WK29690 Fatigue to Fracture And Beyond
WK29697 Convective-Thermal Protective Performance (C-TPP)
WK29700 Standard Specification for Alloy Steel Socket Set Screws
Proposed Revision of
F912-04e1
WK29701 Standard Specification for Alloy Steel Socket Set Screws [Metric]
Proposed Revision of
F912M-04e1
WK29704 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Proposed Revision of
C618-08a
WK29706 Standard Terminology Relating to Soil, Rock, and Contained Fluids
Proposed Revision of
D653-09
WK29710 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-09
WK29716 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
Proposed Revision of
D6392-08
WK29717 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
Proposed Revision of
D4833-07
WK29718 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-09a
WK29719 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-09a
WK29720 Standard Test Method for Leeb Hardness Testing of Steel Products
Proposed Revision of
A956-06
WK29727 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
Proposed Revision of
C311-07
WK29734 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
Proposed Revision of
D7309-07a
WK29735 Laboratory Immersion Procedures for Evaluating the Microbial Degradation of Geomembranes
WK29737 Identification, Storage, and Handling of Geomembrane Rolls
WK29739 Standard Test Methods for Fire Tests of Roof Coverings
Proposed Revision of
E108-10a
WK29740 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-09
WK29741 Standard Terminology for Copper and Copper Alloys
Proposed Revision of
B846-09a
WK29753
WK29758 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-10
WK29760 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
Proposed Revision of
C652-10
WK29772 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
Proposed Revision of
D7501-09b
WK29775 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
Proposed Revision of
C1691-09
WK29782 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK29785 Sampling of Fabricated and Cast Aluminum Product for Compositional Analysis
WK29787 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
Proposed Revision of
C780-09
WK29793 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
WK29794 Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup
WK29796 Standard Test Method for Total Moisture in Coal
Proposed Revision of
D3302/D3302M-10
WK29799 Determining the Resistance of Ceramic Tile to Increased Freeze-Thaw Cycling
WK29802 Aerobically Biodegradable Plastics in Soil Environment
WK29804 Standard Specification for Copper-Beryllium Alloy Seamless Tube
Proposed Revision of
B643-00(2005)
WK29805 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
Proposed Revision of
B813-10
WK29806 Determination of the Polycyclic Aromatic Hydrocarbon (PAH) Content in Carbon Black
WK29813 Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
Proposed Revision of
A1034/A1034M-10
WK29814 Standard Specification for Plastic (Stucco) Cement
Proposed Revision of
C1328-05
WK29817 Standard Specification for Automated Vehicular Gate Construction
Proposed Revision of
F2200-05
WK29818 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Proposed Revision of
A490-10
WK29819 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
Proposed Revision of
A490M-09a
WK29820 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
Proposed Revision of
A354-07a
WK29825 Standard Specification for Stainless Steel Billets and Bars for Forging
Proposed Revision of
A314-08
WK29828 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
Proposed Revision of
C14-07
WK29829 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
Proposed Revision of
C14M-07
WK29830 Standard Specification for Concrete Pipe for Irrigation or Drainage
Proposed Revision of
C118-05a
WK29831 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
Proposed Revision of
C118M-05a
WK29832 Standard Specification for Concrete Drain Tile
Proposed Revision of
C412-05a
WK29833 Standard Specification for Concrete Drain Tile (Metric)
Proposed Revision of
C412M-05a
WK29834 Standard Specification for Porous Concrete Pipe
Proposed Revision of
C654-05a
WK29835 Standard Specification for Porous Concrete Pipe (Metric)
Proposed Revision of
C654M-05a
WK29836 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
Proposed Revision of
C505-05a
WK29837 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
Proposed Revision of
C505M-05a
WK29840 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
Proposed Revision of
D7532-09
WK29844 Classifying and Measuring Pavement Cracking from the Image Collected by Automated Pavement Condition Survey Equipment
WK29849 Standard Practice for Sampling Cotton Fibers for Testing
Proposed Revision of
D1441-06
WK29850 Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
Proposed Revision of
D5866-05
WK29852 Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
Proposed Revision of
D1445-05
WK29865 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site-A Site Contaminated With Chemicals of Interest
Proposed Revision of
D7294-06
WK29867 Standard Test Method for Carbon Black—Iodine Adsorption Number
Proposed Revision of
D1510-09b
WK29877 Standard Test Method for Breaking Strength of Yarn in Skein Form
Proposed Revision of
D1578-93(2006)e1
WK29879 The Laboratory Evaluation of Dirt Track Soil Material Used for Horse Racing
WK29881 Use of an Impact Analyzer to Evaluate Turfgrass Tracks Used for Horse Racing
WK29887 Standard Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
Proposed Revision of
F2651-08b
WK29895 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-10
WK29909 Standard Test Methods for Measuring High-Speed Bat Performance
Proposed Revision of
F2219-10
WK29923 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
Proposed Revision of
D4927-10
WK29924 Standard Practice for Preparing Coal Samples for Analysis
Proposed Revision of
D2013/D2013M-09
WK29931 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
Proposed Revision of
C882/C882M-05e1
WK29933
Proposed Revision of
WK29934 Evaluation of Organic Bonding Systems in Flexure Using Simple Beam with Third-Point Loading
WK29936 June 2011 Committee Meeting Schedule
WK29938 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
Proposed Revision of
D7448-09
WK29947 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-10
WK29948
Proposed Revision of
WK29961 Round Robin testing of CBV zeolites
WK29996 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
Proposed Revision of
D3060-94(2005)
WK29997 Standard Test Method for Delivery Rate of Aerosol Products
Proposed Revision of
D3069-94(2005)
WK30000 Preparation and Use of Dry-Well Calibrators for Temperature Calibration
WK30005 The Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
WK30009 Standard Terminology for Sustainability Relative to the Performance of Buildings
Proposed Revision of
E2114-08
WK30013 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Proposed Revision of
A182/A182M-10
WK30014 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
Proposed Revision of
A350/A350M-07
WK30016 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
Proposed Revision of
A727/A727M-09
WK30019 Standard Test Method for pH of Peat Materials
Proposed Revision of
D2976-71(2004)
WK30023 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
Proposed Revision of
D6743-06
WK30024 Standard Method for Polarized Light Microscopy (PLM) Analysis of Cosmetic and Pharmaceutical Talc for Asbestos Content
WK30028 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
Proposed Revision of
D2885-10
WK30038 Terminology Relating to Thermometry and Hydrometry
Proposed Revision of
E344-08
WK30039 Transmission electron microscopy (TEM) analysis of cosmetic and pharmaceutical talc for asbestos
WK30048
Proposed Revision of
WK30056 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
Proposed Revision of
B417-00(2006)e1
WK30077 Standard Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge
Proposed Withdrawal of
D6180-05
Replacement with None
WK30081 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
Proposed Revision of
D4093-95(2005)e1
WK30088 Those Requesting New Fuels Standards Under Subcommittee D02.E0 (NEW TITLE) Fit for Purpose Considerations for Compression Ignition Distillate Fuel (Diesel Fuel) (OLD TITLE)
WK30091 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
Proposed Revision of
D2711-10
WK30105 Standard Specification for Hardened Steel Washers
Proposed Revision of
F436-10
WK30106 Standard Specification for Hardened Steel Washers [Metric]
Proposed Revision of
F436M-10
WK30107 Standard Practice for Reporting Results of Testing of Specimens Prepared by Additive Manufacturing
WK30108
Proposed Revision of
WK30114 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
Proposed Revision of
G134-95(2006)
WK30116 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
Proposed Revision of
C1435/C1435M-08
WK30118 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment
Proposed Revision of
F1292-09
WK30119 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
Proposed Revision of
F2479-10
WK30126 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
Proposed Revision of
D6866-10
WK30150 Spray-Applied Open Cellular Polyurethane Thermal Insulation
WK30159 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
Proposed Revision of
F2620-09e1
WK30161 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Proposed Revision of
E135-10
WK30164 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
Proposed Revision of
A912/A912M-04
WK30167 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK30178 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-10
WK30188 Standard Specification for Machine Made
Proposed Revision of
D4024-05
WK30189 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Proposed Revision of
D3350-10
WK30190 Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
Proposed Revision of
F2419-05
WK30194 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Proposed Revision of
D3350-10
WK30195 Particle analysis Applications in Pharmaceutical Processes including SUB-Visible particle analysis
WK30196 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Proposed Revision of
D3350-10
WK30199 Validating Analytical Methods
WK30203 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
Proposed Revision of
E1354-10a
WK30211 Butanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
WK30222 Specification for Methods of Measurement and Acceptable Error for Surrogate Silica Sediments Used for the Evaluation of Stormwater Treatment Devices
WK30225 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
Proposed Revision of
D3035-08
WK30226 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
Proposed Revision of
F714-08
WK30227 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK30231 Damage Resistance Testing of Sandwich Constructions
WK30232 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK30233
WK30234 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
Proposed Revision of
F2137-09
WK30235 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK30239 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene
Proposed Revision of
D7194-05
WK30240 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-09a
WK30242 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK30243 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK30246 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
Proposed Revision of
C1602/C1602M-06
WK30248 Standard Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction
Proposed Revision of
F802-83(2003)
WK30250 Wale and Course Count of Weft Knit Fabrics
WK30253 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-08
WK30255 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-10a
WK30256 Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
WK30257 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
Proposed Revision of
D6010-96(2006)
WK30259 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
Proposed Revision of
F606-10
WK30260 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
Proposed Revision of
F606M-10
WK30263 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
Proposed Revision of
D5728-00(2006)
WK30264 Standard Specification for Design and Performance of a Light Sport Glider
Proposed Revision of
F2564-10
WK30270 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
Proposed Revision of
E292-09
WK30271 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08b
WK30272 Determining Porosity and Interconnectivity using Micro-Computed Tomography (CT) in Poly(methylmethacrylate) (PMMA) Bone Cement
WK30274
Proposed Revision of
WK30278 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-09
WK30280 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
Proposed Revision of
E997-01(2009)
WK30284 Standard Terminology Relating to Tissue Engineered Medical Products
Proposed Revision of
F2312-10
WK30285 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
Proposed Revision of
F2212-09
WK30286 Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
Proposed Revision of
F2664-07
WK30288 Standard Terminology Relating to Tissue Engineered Medical Products
Proposed Revision of
F2312-10
WK30290 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
Proposed Revision of
F2212-09
WK30297 Utilization of Mobile, Automated Cured-in-Place Pipe Manufacturing Systems
WK30299 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
Proposed Revision of
F2787-09
WK30311 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-10
WK30313 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
Proposed Revision of
D1785-06
WK30314 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
Proposed Revision of
D2241-09
WK30316 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
Proposed Revision of
E1663-03(2010)
WK30317 Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
Proposed Revision of
D7220-06
WK30318 Determination of Aluminum and Silicon in Heavy Fuel Oils by Monochromatic Energy Dispersive X-ray Fluorescence
WK30331 Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
Proposed Revision of
F2664-07
WK30332 Organizing and Training the Private Sector Citizens and Businesses for Community Emergency Preparedness
WK30335 Certification of Walkway Tribometers
WK30337 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK30339 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
Proposed Revision of
D1122-08
WK30341 Scope of New Subcommittee on Liquid Applied Polymeric Materials Used for Roofing and Waterproofing Membranes
WK30342 Standard Classification of Wall Covering by Use Characteristics
Proposed Revision of
F793-10
WK30343 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
Proposed Revision of
D1160-06
WK30346 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
Proposed Revision of
D4505-05
WK30347 Standard Specification for Elastomeric Seals for Joining Concrete Structures
Proposed Revision of
C1619-05
WK30349 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
Proposed Revision of
D4592-05
WK30352 XRD analhysis of cosmetic and pharmaceutical talc for asbestos
WK30354 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Proposed Revision of
C1064/C1064M-08
WK30356 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
Proposed Revision of
D1840-07
WK30358 Light Sport Aircraft Manufacturers Quality Assurance System
WK30359 Continued Airworthiness System for Light Sport Aircraft
WK30360 DEEP FOUNDATIONS UNDER BI-DIRECTIONAL STATIC AXIAL COMPRESSIVE LOAD
WK30361 Warnings on Paintball Marker Accessories Used In the Sport of Paintball1
WK30363 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Proposed Revision of
D3950-10a
WK30364 Standard Guide for Selection and Use of Flat Strapping Materials
Proposed Revision of
D4675-09
WK30366 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
Proposed Revision of
D5368-93(2006)
WK30375 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Proposed Revision of
C231/C231M-09b
WK30379 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-10c
WK30380 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-10c
WK30382 Digital Imagery Method for the quantification of fugitive dust plumes in the ambient atmosphere.
WK30383 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
Proposed Revision of
D6560-00(2005)
WK30390 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
Proposed Revision of
C877-08
WK30391 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
Proposed Revision of
C877M-02(2009)
WK30392 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
Proposed Revision of
D3241-09e1
WK30394 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
Proposed Revision of
D2774-08
WK30397 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
Proposed Revision of
D5001-10
WK30401 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-09
WK30402 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-09
WK30405 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
Proposed Revision of
D6138-07
WK30408 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
Proposed Revision of
D662-93(2005)
WK30410 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
Proposed Revision of
F2178-08
WK30419 the Use of Agricultural Fiber in Construction
WK30430 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-09
WK30439 Standard Specification for Mortar for Unit Masonry
Proposed Revision of
C270-10
WK30440 Standard Specification for Masonry Cement
Proposed Revision of
C91-05
WK30441 Standard Specification for Plastic (Stucco) Cement
Proposed Revision of
C1328-05
WK30442 Standard Specification for Mortar Cement
Proposed Revision of
C1329-05
WK30448 Standard Consumer Safety Specification for Toddler Beds
Proposed Revision of
F1821-09
WK30450 Standard Specification for Shelter, Tactical, Nonexpandable
Proposed Revision of
E1976-05
WK30451 Standard Specification for Shelter, Tactical, Expandable, One-Side
Proposed Revision of
E1977-05
WK30452 Standard Specification for Shelter, Tactical, Expandable, Two-Side
Proposed Revision of
E1978-05
WK30454 Standard Specification for Methyl n-Amyl Ketone
Proposed Revision of
D4360-03
WK30455 Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
Proposed Revision of
F590-05
WK30457 Standard Terminology Relating to Textiles
Proposed Revision of
D123-09e1
WK30466 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
Proposed Revision of
D4660-06
WK30467 Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
Proposed Revision of
D4672-00(2006)e1
WK30468 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
Proposed Revision of
D4890-06
WK30469 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
Proposed Revision of
D7252-06
WK30470 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
Proposed Revision of
D7253-06
WK30472 Standard Specification and Test Methods for Intramedullary Fixation Devices
Proposed Revision of
F1264-03(2007)e2
WK30481 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
Proposed Revision of
D3960-05
WK30494 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-10a
WK30499 Standard Guide for Identification and/or Segregation of Mixed Lots of Metals
Proposed Revision of
E1916-97(2004)
WK30501 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
Proposed Revision of
E634-05
WK30502 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
Proposed Revision of
E1659-05
WK30504 Standard Guide for Ice Hockey Playing Facilities
Proposed Revision of
F1703-04
WK30507 Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
Proposed Revision of
E1507-98(2003)
WK30509 Specification for PVC Jacketing for Thermal Insulation
WK30511 Standard Terminology of Powder Metallurgy
Proposed Revision of
B243-10
WK30512 Sling Carriers
WK30519 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
Proposed Revision of
D4065-06
WK30520 Standard Specification for Underground Precast Concrete Utility Structures
Proposed Revision of
C858-10
WK30522 Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Process
WK30523 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
Proposed Revision of
C592-10
WK30526 Installations of Thermal Insulation Systems for Childed Water Applications Exposed to Humid Environments.
WK30527 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
Proposed Revision of
D7042-04
WK30528 Standard Test Method for Efficacy of Antimicrobial Agents Against Viruses in Suspension
Proposed Revision of
E1052-96(2002)
WK30530 Standard Test Method for Density of Glass by the Sink-Float Comparator
Proposed Revision of
C729-05
WK30532 MICROBIAL CONTACT TRANSFER: SKIN-TO-SURFACE TRANSFER
WK30533 Evaluating the Relative Effectiveness of Hand Hygiene Formulations Using the Palmar Surface and Mechanical Hand Sampling
WK30536 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
Proposed Revision of
D7511-09e2
WK30537 Outreach/Inreach Strategy
WK30538 Issues to consider for E60 Bylaws
WK30549 Standard Specification for Sodium Chloride (Withdrawn 2010)
D632-01
WK30553 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
Proposed Revision of
A668/A668M-04(2009)
WK30557 Standard Specification for Laser Sintering Moderately Conductive High Melt Temperature Polymers for Non-Structural Aerospace Components
WK30563 Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
WK30565 Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players
Proposed Revision of
F513-00(2007)
WK30567 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
Proposed Revision of
D4595-09
WK30569 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
Proposed Revision of
C1071-05e1
WK30571 Standard Terminology for Nondestructive Examinations
Proposed Revision of
E1316-10b
WK30580 Development of Benchmark Solutions for Composite Delamination Growth Analysis
WK30583 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK30584 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
Proposed Revision of
A320/A320M-10
WK30585 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
Proposed Revision of
A962/A962M-10
WK30587 Standard Guide for Classification of Therapeutic Skin Substitutes
Proposed Revision of
F2311-08
WK30591 Standard Terminology of Adhesives
Proposed Revision of
D907-08b
WK30592 Standard Terminology of Adhesives
Proposed Revision of
D907-08b
WK30594 Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
Proposed Withdrawal of
D686-93(2007)
Replacement with None
WK30595 Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
Proposed Withdrawal of
D727-96(2006)
Replacement with None
WK30600 Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas
Proposed Withdrawal of
D5626-94(2006)
Replacement with None
WK30602 Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
Proposed Withdrawal of
D4949-94(2002)
Replacement with None
WK30604 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
Proposed Revision of
A1014/A1014M-10
WK30606 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
Proposed Revision of
D3164M-03
WK30607 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK30608 Standard Guide for Assessing the Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
Proposed Revision of
E1981-98(2004)
WK30609 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
Proposed Revision of
B151/B151M-05
WK30611 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
Proposed Revision of
C1373-03
WK30613 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
Proposed Revision of
D7520-09
WK30616 Standard Test Method for Air Permeance of Building Materials
Proposed Revision of
E2178-03
WK30617 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-10a
WK30620 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
Proposed Revision of
D4966-98(2007)e1
WK30622 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-10b
WK30624 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
Proposed Withdrawal of
D6069-01(2006)
Replacement with D7184-07
WK30625 the Use of Digital Detector Arrays and Computed Radiology for Aerospace Casting Inspections
WK30626 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
Proposed Revision of
A354-07a
WK30627 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
Proposed Revision of
A484/A484M-10
WK30633 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
Proposed Revision of
D2798-09a
WK30634 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
Proposed Revision of
D2797/D2797M-09
WK30640 Standard Guide for Neutron Irradiation of Unbiased Electronic Components
Proposed Revision of
F1190-99(2005)
WK30641 Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
Proposed Revision of
F528-99(2005)
WK30642 Standard Test Method for Carbon Black-Tint Strength
Proposed Revision of
D3265-07
WK30647 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
Proposed Revision of
A1039/A1039M-09a
WK30649 Steel Ship Structure Repair Doubler Plate Design
WK30651 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Proposed Revision of
E162-09
WK30653 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
Proposed Revision of
E74-06
WK30654 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
Proposed Revision of
E331-00(2009)
WK30655 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
Proposed Revision of
E547-00(2009)
WK30656 Determining the Fire Resistance of Building Perimeter Containment Systems Due to External Spread of Fire
WK30657 Standard Guide for Using Statistical Process Control Princiles for Routine Dosimetry in Radiation Processing
WK30659 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
Proposed Revision of
D7279-08
WK30660 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
Proposed Revision of
C1365-06
WK30666 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
Proposed Revision of
D6138-07
WK30668 Standard Test Method for Determination of Carbon Residue (Micro Method)
Proposed Revision of
D4530-07
WK30671 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
Proposed Revision of
D5434-09
WK30674 Preparation of Plastic Packagings Containing Liquids for UN Drop Testing
WK30676 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Proposed Revision of
D3948-08
WK30685 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
Proposed Withdrawal of
D5337-04
Replacement with None
WK30686 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
Proposed Revision of
F2106-03(2010)
WK30687 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
Proposed Revision of
F2277-03(2010)
WK30688 Standard Specification for Motorized Treadmills
Proposed Revision of
F2115-05
WK30691 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
Proposed Revision of
D3147-06
WK30692 Measuring the Flow Rate of Aerosol Foam Sealant
WK30693 Movement Capability for Aerosol Foam Sealant
WK30697 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK30698 Standard Specification for Copper-Silicon Alloy Wire for General Applications
Proposed Revision of
B99/B99M-06
WK30699 Standard Specification for Carbon Steel Lifting Eyes
Proposed Revision of
A489-04e1
WK30700 Standard Specification for Alloy Steel Eyebolts
Proposed Revision of
F541-04e1
WK30702 Determination of Fire-resistive Wall Continuity Terminating at Non-fire-resistance Rated Floor or Roof Assemblies.
WK30703 Standard Test Method for Fire Tests of Penetration Firestop Systems
Proposed Revision of
E814-10
WK30704 Standard Test Method for Airflow Resistance of Acoustical Materials
Proposed Revision of
C522-03(2009)e1
WK30705 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
Proposed Revision of
E1050-08
WK30707 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
Proposed Revision of
D1413-07e1
WK30712 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
Proposed Revision of
B232/B232M-09
WK30713 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
Proposed Revision of
B401-04
WK30714 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
Proposed Revision of
B524/B524M-99(2005)
WK30715 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
Proposed Revision of
B701/B701M-06
WK30716 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
Proposed Revision of
B711-05
WK30717 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
Proposed Revision of
B779-03(2009)
WK30718 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
Proposed Revision of
B609/B609M-99(2004)
WK30719 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
Proposed Revision of
B911/B911M-05
WK30720 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
Proposed Revision of
A307-07b
WK30723 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK30724 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
Proposed Revision of
F959M-07
WK30741 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
Proposed Revision of
D7266-07e1
WK30745 Zinc Alloys for Spin Casting
WK30747 Additive Manufacturing--Coordinate Systems and Nomenclature
WK30751 Carbon Black--Nondispersible Matter by Mechanical Flushing (NDM)
WK30760 Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
WK30761 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
Proposed Revision of
B944-06
WK30762 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
Proposed Revision of
B929-05
WK30765 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
Proposed Revision of
G126-00(2008)
WK30766 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Proposed Revision of
E1996-09
WK30768 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
Proposed Revision of
D2915-03
WK30769 Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing
Proposed Revision of
F655-06
WK30771 Impermeability of Flexible Barrier Materials to the Passage of Air
WK30772 Standard Guide for Selection and Use of Firestops
WK30777 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Proposed Revision of
F1281-07
WK30780 Analysis of Data Obtained from Replicated Forced-Choice Discrimination Tests
WK30783 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Proposed Revision of
A403/A403M-10
WK30788 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-10
WK30800 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
Proposed Revision of
C692-08
WK30801 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
Proposed Revision of
C795-08
WK30807 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
Proposed Revision of
C1242-10
WK30808 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-09
WK30809 Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers
Proposed Revision of
F2172-02
WK30810 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
Proposed Revision of
E477-06a
WK30811 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
Proposed Revision of
E1450-09
WK30813 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
Proposed Revision of
C1617-09
WK30818 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
Proposed Revision of
D2532-10
WK30820 Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics
Proposed Revision of
F996-10
WK30822 Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
Proposed Revision of
D5798-10
WK30823 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
Proposed Revision of
C203-05a
WK30824 Standard Specification for Aviation Gasolines
Proposed Revision of
D910-07a
WK30825 Standard Specification for Grade 82 Unleaded Aviation Gasoline
Proposed Revision of
D6227-04a
WK30826 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-09
WK30827 Standard Specification for Aviation Turbine Fuels
Proposed Revision of
D1655-10
WK30829 Standard Specification for Aviation Turbine Fuels
Proposed Revision of
D1655-10
WK30836 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
Proposed Revision of
D1006-01(2006)
WK30837 Standard Specification for Selectorized Strength Equipment
Proposed Revision of
F2216-05
WK30839 Geospatial Data for Mining and Mine Reclamation
WK30842 SERIAL PASSAGE RESISTANCE ASSESSMENT
WK30844 Sampling of Product for Evaluation
WK30845 Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
Proposed Revision of
E2348-06
WK30847 Selection of Assessors for Sensory Testing
WK30848 Qualitative Manual
WK30854 Standard Practice for Petrographic Examination of Hardened Concrete
Proposed Revision of
C856-04
WK30855 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
Proposed Revision of
C686-90(2007)
WK30856 Production, Testing, and Certification of Metals, Ores and other Metal-Related Internal Analytical Reference Materials
WK30857 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand
Proposed Withdrawal of
E2011-09
Replacement with None
WK30858 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
Proposed Revision of
D4727/D4727M-07
WK30859 Torque Retention for Packages with CT Closures Using Automated Torque Instruments
WK30865 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Proposed Revision of
F1852-08
WK30866 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Proposed Revision of
F2280-08e1
WK30867 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Proposed Revision of
A325-10
WK30868 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-10
WK30869 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-10
WK30871 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
Proposed Revision of
E2248-09
WK30872 Third Party Training Entities for Amusement Industry Ride Operators, Ride Maintenance Technicians, and Ride Inspectors
WK30873 Standard Practice for Sampling for Particulate Contamination by Tape Lift
Proposed Revision of
E1216-06
WK30875 Standard Specification for Round Timber Piles
Proposed Revision of
D25-99(2005)
WK30876 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
Proposed Revision of
G63-99(2007)
WK30877 Calibration of Liquid Penetrant and Magnetic Particle Testing Equipment
WK30879 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
Proposed Revision of
B265-10
WK30882 Standard Specification for Steel or Aluminum Slotted Angle Crates
Proposed Revision of
D6255/D6255M-05
WK30883 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A781/A781M-08
WK30884 Standard Test Method for Measurement of Backpack Capacity
Proposed Revision of
F2153-07
WK30885 Rubber Property - Macro-Dispersion of Fillers in Compounds
WK30886 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
Proposed Withdrawal of
D6459-07
Replacement with None
WK30887 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283-10
WK30891 determining dezincification depth of copper alloys
WK30894 The Description of Polymer Pellet Defects
WK30908 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
Proposed Revision of
B210-04
WK30909 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
Proposed Revision of
B210M-05
WK30910 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
Proposed Revision of
B807/B807M-06
WK30913 Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement
Proposed Withdrawal of
E1501-99(2004)
Replacement with None
WK30914 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
Proposed Revision of
F1642-04(2010)
WK30915 Standard Practice for Security Engineering Symbols
Proposed Revision of
F967-03
WK30916 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
Proposed Revision of
F2248-09
WK30917 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-09
WK30920 Corrosion Test Panel Preparation and Rating of Coil-Coated Building Products
WK30921 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-10
WK30922 Determination of Carbon and Sulfur in Steel, Nickel and Cobalt Alloys by Combustion - Infrared Detection
WK30924 Determination of Nitrogen and Oxygen in Steel, Nickel and Cobalt Alloys by Fusion Thermal Conductivity and Infrared Detection
WK30925 Wear Assessment of Articulating Total Disc Prostheses
WK30926 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
Proposed Revision of
C533-09
WK30930 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
Proposed Revision of
B744/B744M-05
WK30931 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
Proposed Revision of
B745/B745M-97(2005)
WK30936 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
Proposed Revision of
E1709-09
WK30938 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
Proposed Revision of
D4289-03(2008)
WK30941 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
Proposed Revision of
A216/A216M-08
WK30942 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
Proposed Revision of
A217/A217M-10
WK30943 Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids
Proposed Withdrawal of
E1544-99(2004)e1
Replacement with None
WK30945 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
Proposed Revision of
A1013-00(2005)
WK30948 Standard test method for the determination of Methanol in insulating liquids of petroleum origin by Headspace Gas Chromatography (HS-GC)
WK30950 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK30951 Standard Specification for Tool Steels Alloy
Proposed Revision of
A681-08
WK30960 Determination of volatile organic compounds, diisocyanates, oligomeric isocyanates, and amine catalysts emitted from spray polyurethane foam insulation (SPFI) products designed for on-site application in buildings
WK30964 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
Proposed Revision of
D5927-09
WK30965 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Proposed Revision of
A941-10a
WK30966 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Proposed Revision of
A941-10a
WK30973 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
Proposed Revision of
D2565-99(2008)
WK30974 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
Proposed Revision of
D4364-05
WK30975 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Proposed Revision of
A182/A182M-10
WK30976 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
Proposed Revision of
A924/A924M-10
WK30978 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
Proposed Revision of
D1499-05
WK30979 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
Proposed Revision of
E967-08
WK30980 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
Proposed Revision of
E968-02(2008)
WK30981 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
Proposed Revision of
E468-90(2004)e1
WK30983 Cyclic Pressure Time to Failure for Thermoplastic Pipe
WK30984 Polyamide 612 piping system for fuel gas applications
WK30985 Polyamide 612 electrofusion fittings for fuel gas applications
WK30986 Polyamide 612 transition fittings and meter risers
WK30987 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
Proposed Revision of
A356/A356M-07
WK30989 Density and Unit Weight of Topsoil and Blended Soils in Place by the Core Displacement Method
WK30990 Installation of Corrugated Plastic Pipe for Agricultural Drainage
WK30991 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
Proposed Revision of
A351/A351M-10
WK30992 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
Proposed Revision of
A351/A351M-10
WK30993 Standard Specification for Emulsified Asphalt
Proposed Revision of
D977-05
WK30994 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
Proposed Revision of
D6869-03
WK30995 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
Proposed Revision of
D5420-10
WK30996 Standard Specification for Castings, Nickel and Nickel Alloy
Proposed Revision of
A494/A494M-09e1
WK30997 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
Proposed Revision of
D3641-10
WK31011 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
Proposed Revision of
D3675-09a
WK31012 Standard Test Method for Performance Testing of Excess Flow Valves
Proposed Revision of
F1802-04(2010)
WK31013 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
Proposed Revision of
F2620-09e1
WK31014 Standard Method using Goat for in vivo Testing Articular Cartilage Repair or Regeneration
WK31015 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Proposed Revision of
F1807-10e1
WK31018 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
Proposed Revision of
F2634-07
WK31019 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Proposed Revision of
A106/A106M-10
WK31020 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
Proposed Revision of
D2412-10
WK31024 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
Proposed Revision of
B111/B111M-09
WK31025 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
F2785-09e1
WK31029 Standard Specification for Alloy Steel Socket-Head Cap Screws
Proposed Revision of
A574-08
WK31031 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
Proposed Revision of
A574M-08
WK31038 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
Proposed Revision of
B790/B790M-00(2006)
WK31039 Standard Test Methods for Physical Testing of Gypsum Panel Products
Proposed Revision of
C473-10
WK31040 Standard Specification for Gypsum Board
Proposed Revision of
C1396/C1396M-09a
WK31044 Standard Specification for Steel Forgings, General Requirements
Proposed Revision of
A788/A788M-08a
WK31045 Micrometer Thickness Measurement of Sheet Steel, Metallic Coated
WK31050 11/2010 CHANGE IN INTENT: NO LONGER TO BE A SEPARATE TEST METHOD But to be included in an existing Standard
WK31052 Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems
Proposed Revision of
F2772-09
WK31065 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
Proposed Withdrawal of
F568M-07
Replacement with None
WK31066 Standard Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications
Proposed Revision of
E235-06
WK31067 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
Proposed Revision of
F645-04
WK31068 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
Proposed Revision of
F645-04
WK31069 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
Proposed Revision of
F645-04
WK31071 Analysis of High Purity Lead Using Spark Atomic Emission Spectrometry
WK31072 Standard Specification for Nonstructural Steel Framing Members
Proposed Revision of
C645-09a
WK31073 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
Proposed Revision of
C754-09a
WK31078 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
Proposed Revision of
A447/A447M-10
WK31081 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
Proposed Revision of
F1986-01(2006)
WK31087 Film Permeability Determination Using Static Permeability Cells
WK31089 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
Proposed Revision of
D7147-05
WK31090 Standard Guide for Installation of Geosynthetic Clay Liners
Proposed Revision of
D6102-06
WK31091 Standard Test Method for Performance of Griddles
Proposed Revision of
F1275-03(2008)
WK31092 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
Proposed Revision of
D4304-06a
WK31093 Standard Test Methods for Performance of Steam Cookers
Proposed Revision of
F1484-05
WK31098 Standard Test Method for Performance of Water-Bath Rethermalizers
Proposed Revision of
F2473-05
WK31101 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
Proposed Revision of
D2765-01(2006)
WK31102 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
Proposed Revision of
E2248-09
WK31103 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
Proposed Revision of
F1760-01(2005)e1
WK31111 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
Proposed Revision of
E1549-06
WK31121 Unified Incident Command and Decision Support (UICDS) Middleware
WK31123 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
Proposed Revision of
A29/A29M-05
WK31124 Standard Practice for Fluorescent UV Exposure of Plastics
Proposed Revision of
D4329-05
WK31125 Standard Specification for Nonstructural Steel Framing Members
Proposed Revision of
C645-09a
WK31126 Measuring N-heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an optical device
WK31128 Physiological durability testing standard - Testing for knee activities of daily living
WK31129 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK31135 Standard Specification for Titanium Sponge
Proposed Revision of
B299-08
WK31141 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
Proposed Revision of
E1551-08
WK31142 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
Proposed Revision of
C1264-05
WK31149 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
Proposed Revision of
C747-93(2010)e1
WK31150 Standard Test Method for Bow and Skew over a Specified Distance using a Measuring Tool
WK31152 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
Proposed Revision of
F2007-07a
WK31154 Standard Specification for Nonstructural Steel Framing Members
Proposed Revision of
C645-09a
WK31157 Standard Test Methods for Paper Used for Vacuum Cleaner Filter Bags
Proposed Revision of
F430-05
WK31158 Standard Specification for Application and Finishing of Gypsum Board
Proposed Revision of
C840-08
WK31160 Analyzers used in Exhaust Gas Cleaning Systems
WK31161 Standard Test Methods of Static Tests of Lumber in Structural Sizes
Proposed Revision of
D198-09
WK31162 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
Proposed Revision of
E2649-09
WK31170 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
Proposed Revision of
A266/A266M-03a(2008)
WK31172 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
Proposed Revision of
D3455-02
WK31173 Standard Guide for Selection of Dimension Stone for Exterior Use
Proposed Revision of
C1528-10
WK31174 Guide for the Selection and Integration of Active Vehicle Barrier Safety Devices
WK31176 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
Proposed Revision of
D4020-05
WK31177 manufacturers for labeling and care instructions for wrestling mats
WK31179 Dimension Stone Test Specimen Preparation
WK31180 Standard Guide for Selection of Dimension Stone for Exterior Use
Proposed Revision of
C1528-10
WK31181 Standard Guide for Selection of Dimension Stone for Exterior Use
Proposed Revision of
C1528-10
WK31183 Standard Practice for Sampling Bituminous Paving Mixtures
Proposed Revision of
D979-01(2006)e1
WK31185 Amusement Ride Steam Locomotives
WK31186 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
Proposed Revision of
D6304-07
WK31187 Standard Practice for Sampling Bituminous Paving Mixtures
Proposed Revision of
D979-01(2006)e1
WK31191 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
Proposed Revision of
F606-10
WK31197 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK31200 Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
Proposed Revision of
E1075-85(2004)
WK31202 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
Proposed Revision of
A595/A595M-06
WK31203 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK31204 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK31205 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK31206 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-09a
WK31207 Standard Safety Specification for Consumer Trampoline Enclosures
Proposed Revision of
F2225-09b
WK31209 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836/C836M-10
WK31216 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
Proposed Revision of
D3364-99(2004)
WK31217 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
Proposed Revision of
D4791-10
WK31222 Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615C by Ultra-Fast Gas Chromatography (UFGC)
WK31223 Selection of Digital and Network Video Recording (DVR and NVR) Equipment for Security Applications
WK31224 Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
Proposed Revision of
D7319-09
WK31225 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
Proposed Revision of
C610-09e1
WK31228 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
Proposed Revision of
C335/C335M-10
WK31229 Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
WK31231 Re-refined; reclaimed or recycled mineral oil
WK31233 Oxidation Resistance of Biodegradable Lubricating Fluids Without the Addition of Water (DRY TOST)
WK31234 Biodegradable Hydraulic Fluids
WK31236 Standard Practice for Visual Inspection of Asbestos Abatement Projects
Proposed Revision of
E1368-05e1
WK31237 Standard Guide for Prediction of Analyzer Sample System Lag Times
Proposed Revision of
D7278-06
WK31238 Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
WK31239 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Proposed Revision of
E23-07ae1
WK31240 Micrometer Thickness Measurement of Sheet Steel, Bare or Metallic Coated
WK31241 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
Proposed Revision of
C1107/C1107M-08
WK31242 Standard Specification for Hydrogen Thermophysical Property Tables
Proposed Revision of
D7265-06
WK31245 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
Proposed Revision of
D7175-08
WK31247 Structural Steel with Improved Yield Strength at High Temperature for use in Buildings
WK31249 Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
WK31261 Standard Specification for Alloy Structural Steel Plates
Proposed Revision of
A829/A829M-06
WK31263 Standard Specification for Precast Concrete Septic Tanks
Proposed Revision of
C1227-10a
WK31264 Particle counting in support of condition monitoring
WK31272 Unit Masonry Construction Tolerance
WK31273 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK31276 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Proposed Revision of
C109/C109M-08
WK31277 Standard Test Method for Lightweight Particles in Aggregate
Proposed Revision of
C123-04
WK31278 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
Proposed Revision of
E385-07
WK31282 Standard Test Method for Surface Moisture in Fine Aggregate
Proposed Revision of
C70-06
WK31283 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
Proposed Revision of
D4561-96(2006)
WK31284 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
Proposed Revision of
D4469-01(2006)
WK31285 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-09a
WK31288 Standard Terminology Relating to Materials for Roads and Pavements
Proposed Revision of
D8-02
WK31289 Metric-Sized Crosslinked Polyethylene (PEX) Line Pipe, Fittings, and Joining Methods
WK31294 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
Proposed Revision of
B409-06e1
WK31298 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
Proposed Revision of
E136-09b
WK31299 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
Proposed Revision of
D6284-09
WK31300 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Proposed Revision of
C117-04
WK31301 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Proposed Revision of
C566-97(2004)
WK31302 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates
Proposed Revision of
D5711-03
WK31318 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Proposed Revision of
F1216-09
WK31319 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
Proposed Revision of
B853-07
WK31320 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Proposed Revision of
E23-07ae1
WK31321 Task group to investigate heater tube surface finish effects on rating tubes
WK31322 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
Proposed Revision of
D1140-00(2006)
WK31323 Standard Practice for Standardized Aquatic Microcosms: Fresh Water
Proposed Revision of
E1366-02(2007)
WK31328 SBS and APP Modified Bitumen Cold Adhesive Systems
WK31330 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
Proposed Revision of
D6354-98(2008)
WK31335 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
Proposed Revision of
E1388-05
WK31336 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
Proposed Revision of
G113-09
WK31337 Standard Consumer Safety Specification for Portable Bed Rails
Proposed Revision of
F2085-10a
WK31338 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
Proposed Revision of
D7027-05e1
WK31342 Standard Specification for Outdoor Wall Padding
WK31345 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
Proposed Revision of
C1067-00(2007)
WK31346 Wear Test of Unitary Surfaces under and around Playground Equipment
WK31348 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
Proposed Revision of
A741-98(2009)e1
WK31350 Standard Specification for Centrifugal Pump, Shipboard Use
Proposed Revision of
F998-10
WK31360 Standard Specification for Seamless Stainless Steel Mechanical Tubing
Proposed Revision of
A511/A511M-08
WK31361 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
Proposed Revision of
D661-93(2005)
WK31363 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK31364 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK31365 Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
Proposed Withdrawal of
D5115-90(2004)
Replacement with None
WK31374 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
Proposed Revision of
D4554-02(2006)
WK31376 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
Proposed Revision of
C672/C672M-03
WK31377 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
Proposed Revision of
C672/C672M-03
WK31378 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
Proposed Revision of
C672/C672M-03
WK31381 Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
WK31382 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
Proposed Revision of
D847-08
WK31383 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
Proposed Revision of
D848-09
WK31385 Standard Test Method for Rubber Property—Effect of Liquids
Proposed Revision of
D471-10
WK31386 Standard Terminology Relating to Concrete and Concrete Aggregates
Proposed Revision of
C125-10a
WK31391 Testing of a Small Unmanned Aircraft System (sUAS)
WK31394 Standard Specification for Cast Iron Soil Pipe and Fittings
Proposed Revision of
A74-09
WK31396 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
Proposed Revision of
A888-09
WK31397 Standard Specification for Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4814-10b
WK31398 Standard Practice for Sampling Yarn for Testing
Proposed Revision of
D2258-99(2005)
WK31399 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
Proposed Revision of
E1509-04
WK31401 Standard Test Method for Hydrostatic Leak Testing
Proposed Revision of
E1003-05
WK31402 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK31403 Standard Test Methods for Determining the Inclusion Content of Steel
Proposed Revision of
E45-10
WK31404 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
Proposed Revision of
A352/A352M-06
WK31406 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
Proposed Revision of
A995/A995M-09
WK31412 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
Proposed Revision of
D5988-03
WK31413 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
Proposed Revision of
D5003-06a
WK31414 Standard Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
Proposed Revision of
D6336-98(2004)
WK31420 Establishment of Adequate Infrastructure into the Development of Building Sites Promoting Sustainability
WK31422 Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
D4750-87(2001)
WK31423 Establishment of Neighborhood Assets into the Development of Building Sites Promoting Sustainability
WK31424 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
Proposed Revision of
F1970-05
WK31425 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Proposed Revision of
F1807-10e1
WK31426 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
Proposed Revision of
F512-06
WK31429 Incorporating Street Connectivity Provisions into the Development of Building Sites Promoting Sustainability
WK31430 Incorporating Transit Access into the Development of Building Sites Promoting Sustainability
WK31433 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
Proposed Revision of
E2515-10
WK31435 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
Proposed Revision of
E2558-09
WK31443 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
Proposed Revision of
F2105-06
WK31444 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
Proposed Revision of
F820-06
WK31447 Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
Proposed Revision of
D2639-08
WK31448 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
Proposed Revision of
F558-06
WK31449 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
Proposed Revision of
D1990-07
WK31450 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK31451 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
Proposed Revision of
C1383-04
WK31452 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
Proposed Revision of
C1383-04
WK31453 Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
Proposed Revision of
D4962-02(2009)
WK31455 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-10b
WK31457 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
Proposed Revision of
E2102-09
WK31458 Standard Guide for The Installation of Operable Partitions
Proposed Revision of
E557-00(2006)e1
WK31459 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
Proposed Revision of
B344-01
WK31462 Standard Test Method for Slump of Hydraulic-Cement Concrete
Proposed Revision of
C143/C143M-10a
WK31463 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
Proposed Revision of
C1636-06a
WK31464 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
Proposed Revision of
D3737-09
WK31465 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
Proposed Revision of
D3737-09
WK31466 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK31467 Standard Specification for Structural Cementitious Panels
Proposed Revision of
C1705/C1705M-09
WK31468 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK31469 Standard Specification for Performance Graded Asphalt Binder
Proposed Revision of
D6373-07e1
WK31470 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-10a
WK31471 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
Proposed Revision of
D5311-92(2004)e1
WK31474 Standard Guide for Sensory Evaluation of Products by Children
Proposed Revision of
E2299-03
WK31478 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
Proposed Revision of
E910-07
WK31479 Standard Practice for Use of a Radiochromic Film Dosimetry System
Proposed Revision of
E1275
WK31480 Standard Practice for Use of the Alanine-EPR Dosimetry System
Proposed Revision of
E1607
WK31481 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
Proposed Revision of
E1608
WK31482 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
Proposed Revision of
E1649
WK31483 Standard Practice for Use of Cellulose Acetate Dosimetry Systems
Proposed Revision of
E1650
WK31484 Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
Proposed Revision of
E1707
WK31485 Standard Practice for Blood Irradiation Dosimetry
Proposed Revision of
E1939
WK31487 Standard Terminology of Ceramic Whitewares and Related Products
Proposed Revision of
C242-01(2007)
WK31496 Standard Specification for Shock Attenuation Properties of Fencing Surfaces
Proposed Revision of
F1543-96(2007)
WK31499 Standard Practice for Outdoor Weathering of Plastics
Proposed Revision of
D1435-05
WK31501 Standard Practice for Collection of Floor Dust for Chemical Analysis
Proposed Revision of
D5438-05
WK31504 Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium.
WK31505 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-10
WK31506 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK31507 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Proposed Revision of
C535-09
WK31508 Ornamental Fences Employing Aluminum Tubular Pickets
WK31509 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
Proposed Revision of
F2170-09
WK31511 batteries used for small UAS
WK31512 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
Proposed Revision of
D7483-08
WK31513 Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) With Variable Mesh Patterns or Meshes Greater Than 6 Square inches (3,871 mm2) in Panels
WK31514 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
Proposed Revision of
D7611/D7611M-10
WK31515 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
Proposed Revision of
D5511-02
WK31516 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
Proposed Revision of
D5526-94(2002)
WK31517 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
Proposed Revision of
A656/A656M-10
WK31521 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
Proposed Revision of
D6391-06
WK31525 Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
WK31526 Elevated Temperature Solid Particle Erosion
WK31531 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
Proposed Revision of
F2561-06
WK31532 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
Proposed Revision of
F2599-06
WK31537 Position, Altitude and Airspeed reporting of small Unmanned Aircraft Systems
WK31538 Weighing a Bicycle
WK31539 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
Proposed Revision of
C401-91(2005)
WK31541 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
Proposed Revision of
D1176-98(2008)
WK31543 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
Proposed Revision of
D7618-10
WK31544 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK31549 Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air
Proposed Withdrawal of
D4947-05
Replacement with None
WK31550 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
Proposed Withdrawal of
D6332-99(2005)
Replacement with None
WK31551 Standard Terminology Relating to Sensory Evaluation of Materials and Products
Proposed Revision of
E253-10
WK31553 Standard Terminology Relating to Amusement Rides and Devices
Proposed Revision of
F747-06
WK31554 Standard Terminology for Engine Coolants
Proposed Revision of
D4725-08a
WK31555 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
Proposed Revision of
F2544-06e1
WK31557 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
Proposed Revision of
C806-04
WK31558 Standard Specification for Expansive Hydraulic Cement
Proposed Revision of
C845-04
WK31562 Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
Proposed Revision of
B611-85(2005)
WK31563 Determination of Flare Efficiency using Narrow Field Passive Fourier Transform Infrared Spectroscopy
WK31564 Standard Test Method for Load Testing Refractory Shapes at High Temperatures
Proposed Revision of
C16-03(2008)e1
WK31565 Standard Terminology Relating to Refractories
Proposed Revision of
C71-08
WK31566 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
Proposed Revision of
C92-95(2010)
WK31567 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
Proposed Revision of
E1582-04
WK31568 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
Proposed Revision of
D3487-09
WK31569 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
Proposed Revision of
E2380/E2380M-09
WK31570 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
Proposed Revision of
E2157-09
WK31577 Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
Proposed Revision of
A1034/A1034M-10a
WK31584 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
Proposed Revision of
C550-10
WK31585 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK31586 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK31588 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
Proposed Revision of
C780-10
WK31589 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
Proposed Revision of
C1303/C1303M-10
WK31590 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-10c
WK31591 Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
Proposed Revision of
F1192-00(2006)
WK31595 Standard Test Method for Retroreflectance of Horizontal Coatings
Proposed Revision of
D4061-94(2006)
WK31607 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK31608 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
Proposed Revision of
E2244-05
WK31610 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
Proposed Revision of
E2245-05
WK31611 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
Proposed Revision of
E2246-05
WK31614 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
Proposed Revision of
D346-04(2010)
WK31615 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
Proposed Revision of
D3561-02(2007)e1
WK31616 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
Proposed Revision of
D3651-07
WK31617 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
Proposed Revision of
D3986-07
WK31618 Standard Test Method for Sulfate Ion in Water
Proposed Revision of
D516-07
WK31619 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
Proposed Revision of
D1976-07
WK31620 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
Proposed Revision of
D4309-02(2007)
WK31621 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
Proposed Revision of
D4638-03(2007)
WK31622 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
Proposed Revision of
D4691-02(2007)
WK31623 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
Proposed Revision of
D6800-02(2007)e1
WK31624 the Classification, Design, Manufacture, Construction, and Operation of Standing Wave Systems
WK31629 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-10c
WK31630 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-10c
WK31631 Corrective Action Through a Comprehensive and Integrated Consideration of Remediation Process Optimization (RPO) Techniques
WK31632 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-10b
WK31633 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-10a
WK31638 Evaluating Static Pose Measurement Systems
WK31639 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
Proposed Revision of
D3574-08
WK31640 Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
Proposed Revision of
F2432-04
WK31641 Standard Specification for Dispensers, Powdered Iced Tea
Proposed Revision of
F1023-99(2004)
WK31643 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
Proposed Revision of
C887-05(2010)
WK31644 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK31645 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
Proposed Revision of
D7241-06
WK31646 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
Proposed Revision of
D788-06
WK31649 Standard Terminology of Masonry
Proposed Revision of
C1232-10c
WK31651 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
Proposed Revision of
C62-10
WK31653 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
Proposed Revision of
C652-10
WK31656 Standard Specification for Pedestrian and Light Traffic Paving Brick
Proposed Revision of
C902-10
WK31657 Standard Terminology Relating to Carbon Black
Proposed Revision of
D3053-10
WK31662 Standard Test Method for Compressive Strength of Dimension Stone
Proposed Revision of
C170/C170M-09
WK31663 Design and Construction of Welded Wire Fence systems for Security Purposes
WK31671 Calculation of the Resource Depletion Potential of Mineral Commodities
WK31672 Standard Test Method for Bromine in Chlorine
Proposed Revision of
E649-00(2005)e1
WK31673 Standard Practice for Recovery of Enteroviruses from Waters
Proposed Revision of
D5244-92(2004)
WK31674 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water
Proposed Revision of
D5246-92(2004)
WK31675 Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
Proposed Revision of
D5465-93(2004)
WK31678 Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure
Proposed Revision of
E2709-10
WK31679 Process for Inactivation of Retrovirus by pH
WK31680 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-10
WK31689 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
Proposed Revision of
D6358-06
WK31691 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-10
WK31692 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality (Withdrawn 2010)
D3862-80(2001)
WK31696 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
Proposed Revision of
D5296-05
WK31703 Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures using AASHTO LRFD Design
WK31704 Standard Specification for Welded Wire Lath
Proposed Revision of
C933-09
WK31705 Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
Proposed Revision of
F2609-07
WK31706 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
Proposed Revision of
D1816-04
WK31710 resistance heating element alloy with a nominal composition of 38Ni-22Cr-1.7Si-0.006La.
WK31711 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
Proposed Revision of
E1111-07
WK31712 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
Proposed Revision of
D7679-10
WK31718 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
Proposed Revision of
C780-10
WK31719 Standard Test Method for Compressive Strength of Masonry Prisms
Proposed Revision of
C1314-10
WK31720 Standard Test Method of Sampling Processed Peat Materials
Proposed Revision of
D2944-71(2008)
WK31721 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
Proposed Revision of
D2974-07a
WK31723 Standard Practice for Estimating Peat Deposit Thickness
Proposed Revision of
D4544-86(2008)
WK31724 Standard Test Method for pH of Soils
Proposed Revision of
D4972-01(2007)
WK31725 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
Proposed Revision of
D5435-03(2008)
WK31726 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
Proposed Revision of
D5715-00(2006)
WK31727 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
Proposed Revision of
D5883-96(2008)
WK31742 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
F877-07
WK31743 Standard Terminology Relating to Electrical Protective Equipment for Workers
Proposed Revision of
F819-10
WK31744 Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
Proposed Revision of
E171-94(2007)
WK31746 Standard Terminology of Advanced Ceramics
Proposed Revision of
C1145-06
WK31747 Standard Practices for Sampling Metal Powders
Proposed Revision of
B215-08
WK31748 Standard Practices for Sampling Metal Powders
Proposed Revision of
B215-08
WK31750 Standard Specification for Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4814-10b
WK31755 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
Proposed Revision of
D4678-04(2009)
WK31757 Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
Proposed Revision of
F2321-05
WK31759 Factory-Laminated Gypsum Panel Products
WK31760 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
Proposed Revision of
F1114-06
WK31761 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-10b
WK31763 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-10b
WK31764 Standard Test Methods for Identification of Fibers in Textiles
Proposed Revision of
D276-00a(2008)
WK31765 Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy
Proposed Revision of
F31-05(2010)
WK31766 Pressure Rate of Rise Leak Test
WK31767 Interior Finish
WK31769 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
Proposed Revision of
D5379/D5379M-05
WK31770 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
Proposed Revision of
D7078/D7078M-05
WK31777 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Proposed Revision of
C138/C138M-10b
WK31779 Standard Test Method for Foaming Characteristics of Lubricating Oils
Proposed Revision of
D892-10
WK31780 US position on N1703-1707 ISO CD 16486 Parts 1-6
WK31781 Standard Test Method for Foaming Characteristics of Lubricating Oils
Proposed Revision of
D892-10
WK31785 Standard Practice for Evaluating Phased Array Transducers for Manufacture
WK31786 Determination of Total Nitrogen by Persulfate Digestion with Nitrophenol Enrichment and Colorimetric Detection
WK31790 Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
Proposed Revision of
F1467-99(2005)e1
WK31799 Designing Medical Devices for Cleanability
WK31800 Standard Specification for Solid Concrete Interlocking Paving Units
Proposed Revision of
C936/C936M-09
WK31801 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
Proposed Revision of
C1645/C1645M-09
WK31802 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
Proposed Revision of
A732/A732M-09
WK31803 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
Proposed Revision of
A747/A747M-07
WK31804 Testing and Optimal Selection of Radiological Protection Garments
WK31805 Standard Specification for Determining the Rating Velocities of an Archery Bow
Proposed Revision of
F1544-09
WK31806 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
Proposed Revision of
F1150-06
WK31813 for Air Soft Game Field Operation
WK31815 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-10
WK31816 Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
Proposed Revision of
C1438-99(2005)e1
WK31817 Standard Test Method for Distillation Range of Volatile Organic Liquids
Proposed Revision of
D1078-05
WK31818 Standard Test Method for Protective Clothing Material Resistance to Puncture
Proposed Revision of
F1342-05
WK31819 Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
Proposed Revision of
D3864-06
WK31820 Measuring the Field Performance of Commercial Kitchen Ventilation Systems
WK31823 Standard Test Method for Thermal Diffusivity by the Flash Method
Proposed Revision of
E1461-07
WK31824 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
Proposed Revision of
E1530-06
WK31825 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
Proposed Revision of
F1202-06
WK31827 High Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y-TZP) for Cylindrical Roller Blanks for Roller Bearings
WK31829 Standard Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
Proposed Revision of
F1203-06
WK31830 Determination of Loose and Tapped Bulk Density of Plutonium Oxide
WK31831 How to Measure Apparel,
WK31832 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK31833 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK31834 International Sizing Conversion
WK31835 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
Proposed Revision of
D6866-10
WK31836 Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
Proposed Revision of
F2762-11
WK31846 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
Proposed Revision of
A90/A90M-09
WK31848 Standard Practice for Accreditation of Testing Agencies for Masonry
Proposed Revision of
C1093-09
WK31849 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
Proposed Revision of
A754/A754M-08
WK31851 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
Proposed Revision of
A755/A755M-03(2008)
WK31856 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
Proposed Revision of
C1556-04
WK31857 INSPECTION OF X-RAY PROTECTIVE GARMENTS
WK31858 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
Proposed Revision of
D7439-08
WK31861 Standard Test Methods for Quantitative Analysis of Textiles
Proposed Revision of
D629-08
WK31862 Standard Practice for Preservation of Waterborne Oil Samples
Proposed Revision of
D3325-90(2006)
WK31863 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
Proposed Revision of
D3328-06
WK31864 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
Proposed Revision of
D3414-98(2004)
WK31866 Standard Test Method for Permeability of Granular Soils (Constant Head)
Proposed Revision of
D2434-68(2006)
WK31868 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
Proposed Revision of
D4511-00(2006)
WK31869 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
Proposed Revision of
D5739-06
WK31874 Standard Specification for Fuel Oils
Proposed Revision of
D396-10
WK31875 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
Proposed Revision of
D4015-07
WK31876 Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
WK31883 Integral Motor Pumps
WK31886 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-10
WK31890 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
Proposed Revision of
B733-04(2009)
WK31897 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
Proposed Revision of
E181-10
WK31900 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
Proposed Revision of
E1921-10e1
WK31901 Measuring Antibacterial Activity on Textiles
WK31902 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
Proposed Revision of
D3999-91(2003)
WK31910 Standard Guide for Design and Construction of Chain Link Security Fencing
Proposed Revision of
F2611-06
WK31912 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
Proposed Revision of
D7248/D7248M-08
WK31913 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
Proposed Revision of
D6953-03
WK31914 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
Proposed Revision of
E1767-04
WK31915 Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
Proposed Revision of
F1587-99(2005)
WK31916 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Proposed Revision of
D129-00(2005)
WK31917 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
Proposed Revision of
D808-05
WK31918 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
Proposed Revision of
D6522-00(2005)
WK31919 Standard Test Method for Reflection Haze of High-Gloss Surfaces
Proposed Revision of
D4039-09
WK31922 Tensile Testing of Aramid Paper
WK31924 Fiber Reinforced Plastic (FRP) Gratings Used in Marine Construction and Shipbuilding
WK31925 Creep Testing of Fibers
WK31929 Areal Density Measurement of an Armour Panel
WK31930 Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
Proposed Withdrawal of
D4393/D4393M-10
Replacement with None
WK31958 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
Proposed Revision of
D713-90(2004)
WK31961 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
Proposed Revision of
D3160-07
WK31966 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
Proposed Revision of
C1231/C1231M-10a
WK31971 Standard Guide for ASTM Standards on Playground Surfacing
Proposed Revision of
F2223-10
WK31972 Mechanical and Electrical Testing of Insulating Links for Lifting Equipment
WK31984 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
Proposed Revision of
D4798/D4798M-11
WK31985 Certification of Walkway Tribometers
WK31988 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
Proposed Revision of
C968-06
WK31991 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
Proposed Revision of
A1057/A1057M-08
WK31992 Standard Practice for Sampling Freshly Mixed Concrete
Proposed Revision of
C172/C172M-10
WK31993 Communication of Sustainable Attributes of Products
WK31995 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
Proposed Revision of
D3300-00(2006)
WK31998 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
Proposed Revision of
D4819-96(2005)
WK32005 Standard Practice for the Determination of Analytical Performance Specifications for Sensors with Field Applications
WK32006 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-09
WK32021 Determining the Damage Characteristic Curve of Asphalt Concrete from Direct Tension Cyclic Fatigue Tests
WK32028 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-10a
WK32033 the Dating of Documents
WK32034 the Classification of Writing Instruments
WK32035 Standard Terminology for Three-Dimensional (3D) Imaging Systems
Proposed Revision of
E2544-10
WK32041 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test method
WK32046 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
Proposed Revision of
F1632-03(2010)
WK32060 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
Proposed Revision of
D4417-03
WK32061 Standard Test Method for Differential Dyeing Behavior of Cotton
Proposed Revision of
D1464-07
WK32062 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
Proposed Revision of
C796-04
WK32063 Standard Test Methods for Bend Testing of Material for Ductility
Proposed Revision of
E290-09
WK32064 Determination of Thiodiglycol on Wipes by Solvent Extraction followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
WK32065 Coring Testing of Huber Needles
WK32066 Standard Performance Specification for Woven Napery and Tablecloth Fabrics Household and Institutional (Withdrawn 2011)
D4111-02
WK32067 Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories (Withdrawn 2009)
D4721-89(2000)
WK32068 Standard Specification for Woven and Warp Knitted Comforter Fabrics (Withdrawn 2009)
D4769-88(2000)
WK32069 Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use (Withdrawn 2009)
D5378-93(2000)
WK32070 Standard Performance Specification for Blanket Products for Institutional and Household Use (Withdrawn 2009)
D5432-93(2000)e1
WK32071 Standard Performance Specification for Towel Products for Institutional and Household Use (Withdrawn 2009)
D5433-00
WK32072 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
Proposed Revision of
B212-09
WK32074 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
Proposed Revision of
D6038-05e1
WK32075 Standard Test Methods for Screening of Reactive Sulfides in Waste
Proposed Revision of
D4978-95(2007)
WK32076 Installation of Insulating Concrete Forms
WK32079 Determination of Mold Growth on Building Products Designed for Exterior Applications using an Environmental chamber and Direct Inoculation.
WK32096 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Proposed Revision of
E23-07ae1
WK32097 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
Proposed Revision of
D5055-10
WK32098 Standard Guide for Preparation of Aluminum Alloys for Electroplating
Proposed Revision of
B253-87(2010)
WK32110 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
Proposed Revision of
D3201-08ae1
WK32111 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
Proposed Revision of
C470/C470M-09
WK32112 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
Proposed Revision of
E336-10
WK32113 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
Proposed Revision of
D2872-04
WK32114 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
Proposed Revision of
F1043-10
WK32117 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
Proposed Withdrawal of
D6582-00(2005)e1
Replacement with None
WK32120 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
Proposed Withdrawal of
D3345-08
Replacement with None
WK32121 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
Proposed Revision of
D5516-09
WK32122 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
Proposed Withdrawal of
E69-02(2007)
Replacement with None
WK32126 the Qualitative Determination of Polymer in Latices Recovered from Asphalt Emulsions
WK32127 FIBER SHEDDING OF PAINT ROLLER COVERS
WK32133 Emergency Operations Center Management
WK32134 Standard Specification for Seamless Copper Tube [Metric]
B75M-99(2005)
Replacement with B75-02(2010)
WK32135 Standard Test Methods for Impact Testing of Cast Irons
Proposed Revision of
A327-91(2006)
WK32136 Standard Test Methods for Impact Testing of Cast Irons (Metric)
Proposed Withdrawal of
A327M-91(2006)
Replacement with None
WK32139 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) (Withdrawn 2011)
D5477-02
WK32140 Standard Guide for Terminology Relating to Candles and Associated Accessory Items
Proposed Revision of
F1972-05
WK32141 Standard Specification for Fire Safety for Candles
Proposed Revision of
F2417-09
WK32142 Standard Specification for Fire Safety for Candle Accessories
Proposed Revision of
F2601-09
WK32143 Visual Assessment of Water Beading on Horizontal Coatings
WK32144 Standard Guide for Disposal of Laboratory Chemicals and Samples
Proposed Revision of
D4447-06
WK32151 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
Proposed Revision of
D1037-06a
WK32154 Collection of Volatile Organic Compounds Emitted During Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
WK32155 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
Proposed Revision of
D4383-05e1
WK32159 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
Proposed Revision of
E1077-01(2005)
WK32173 Standard Consumer Safety Specification for Portable Bed Rails
Proposed Revision of
F2085-10a
WK32176 Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
Proposed Revision of
D5240-04
WK32177 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
Proposed Revision of
D5312-04
WK32178 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
Proposed Revision of
D5313-04
WK32179 Standard Digital Reference Images for Inspection of Magnesium Castings
WK32180 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
Proposed Revision of
E2783-10
WK32182 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
Proposed Revision of
F2648/F2648M-10
WK32184 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
Proposed Revision of
F1004-10
WK32185 Standard Consumer Safety Specification for High Chairs
Proposed Revision of
F404-10
WK32186 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
Proposed Revision of
F1917-08
WK32187 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
Proposed Revision of
D1384-05e1
WK32188 Calculating the Superimposed Load on Wood-Frame Floor-Ceiling Assemblies for Standard Fire-Endurance Tests
WK32191 Standard Terminology Relating to Water
Proposed Revision of
D1129-10
WK32192 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection
Proposed Revision of
D6591-06
WK32195 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
Proposed Revision of
D7611/D7611M-10
WK32196 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
Proposed Revision of
C592-10
WK32197 Consumer Product Safety for Childrens Jewelry
WK32199 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
Proposed Revision of
D7611/D7611M-10
WK32201 Cross-Linked Polyethylene (PEX) Tubing for Radiant Heating
WK32203 Determining The Reactivity of Concrete Aggregates and The Selection of Appropriate Measures For The Prevention of Deleterious Expansion In Concrete Construction
WK32204 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
Proposed Revision of
E1369-07e2
WK32209 Standard Guide on Metallographic Laboratory Safety
Proposed Revision of
E2014-99(2005)
WK32211 Standard Guide for Physical Evidence Labeling and Related Documentation
Proposed Revision of
E1459-92(2005)
WK32212 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B121/B121M-01(2006)
WK32213 Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B592-01(2006)
WK32214 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B465-09
WK32215 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
Proposed Revision of
C1178/C1178M-08
WK32216 Standard Specification for Glass Mat Gypsum Panels
Proposed Revision of
C1658/C1658M-06
WK32231 Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
Proposed Revision of
F1813-06
WK32234 Standard Guide for Evaluating Water Leakage of Building Walls
Proposed Revision of
E2128-01a(2009)
WK32245 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32246 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
Proposed Withdrawal of
D4313-03(2010)
Replacement with None
WK32247 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
Proposed Withdrawal of
D4363-98(2010)
Replacement with None
WK32248 Standard Specification for Reflective Insulation for Building Applications
Proposed Revision of
C1224-09
WK32249 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
Proposed Revision of
C1668-10
WK32254 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
Proposed Revision of
D7566-10a
WK32267 Standard Specification for Rubber Surgical Gloves
Proposed Revision of
D3577-09e1
WK32268 Standard Specification for Rubber Examination Gloves
Proposed Revision of
D3578-05(2010)
WK32271 Evaluation of Foaming Tendency of Liquid Inks and Ink Vehicles
WK32272 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
Proposed Revision of
D6459-07
WK32276 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
Proposed Revision of
E2169-01(2007)
WK32288 Standard Practice for Sampling Liquids in Tanks
WK32290 Standard Practice for Sampling Waste Streams on Conveyors
Proposed Revision of
D7204-07
WK32291 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
Proposed Revision of
D7353-07
WK32292 Standard Test Methods for Flammability Potential Screening Analysis of Waste
Proposed Revision of
D4982-95(2007)
WK32293 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
Proposed Revision of
A426/A426M-10
WK32294 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
Proposed Revision of
C387/C387M-11
WK32297 Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
Proposed Revision of
D3853-08e1
WK32301 Standard Terminology Relating to Rubber
Proposed Revision of
D1566-10e1
WK32304 Standard Guide for Installation of Geosynthetic Clay Liners
Proposed Revision of
D6102-06
WK32307 Standard Test Method for Carbon Black Content in Olefin Plastics
Proposed Revision of
D1603-06
WK32308 Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion
Proposed Withdrawal of
F1612-95(2005)
Replacement with None
WK32309 Measurement of Flow Properties of Lubricating Grease by Die Extrusion
WK32310 Standard Test Method for Yarn Number Based on Short-Length Specimens (Withdrawn 2010)
D1059-01
WK32319 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
Proposed Revision of
D5483-05(2010)
WK32320 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
Proposed Revision of
D7369-09
WK32321 Standard Test Methods for Performance of Steam Cookers
Proposed Revision of
F1484-05
WK32326 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
Proposed Revision of
E2548-07
WK32327 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
Proposed Revision of
E1412-07
WK32328 Determining the Dynamic Modulus for Bituminous Mixtures using the Indirect Tension Testing Method
WK32329 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
Proposed Revision of
D7514-09
WK32330 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
Proposed Revision of
E1217-05
WK32331 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
Proposed Revision of
E984-06
WK32333 Standard Specification for Total Knee Prosthesis
Proposed Revision of
F2083-10
WK32335 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
Proposed Revision of
D5135-07
WK32336 Poly(Vinyl Chloride) (PVC) Gasketed Sanitary and Storm Drainage Sewer Basins and Fittings
WK32337 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications with Recycled Resins
WK32338 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications with Virgin Resins
WK32339 Standard Specification for Tensile Testing Machines for Textiles
Proposed Revision of
D76-99(2005)
WK32340 Standard Specification for
Proposed Revision of
D3262-06
WK32341 Standard Specification for
Proposed Revision of
D3517-06
WK32342 Standard Specification for
Proposed Revision of
D3754-06
WK32343 Standard Practice for Testing Pultruded Composites
WK32344 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
Proposed Revision of
E2149-10
WK32345 the Measurement of Composition, Energy Content and Indices for Liquid Light Hydrocarbons Such as LNG, LPG and NGL
WK32346 On-line Analysis of Liquified Natural Gas (LNG) by Raman Spectroscopy
WK32353 Standard Specification for High-Purity Dense Aluminum Oxide for Surgical Implant Application (Withdrawn 2009)
F603-00
WK32355 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A957/A957M-09a
WK32356 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
Proposed Revision of
A985/A985M-08
WK32357 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
Proposed Revision of
E2699-10
WK32360 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
Proposed Revision of
E2738-10
WK32361 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
Proposed Revision of
E2767-10
WK32362 Biorationals
WK32363 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
Proposed Revision of
F1436-07
WK32364 MEASURING STRAIN AND COMPRESSION (OR TENSION) IN DEEP FOUNDATIONS UNDER STATIC AXIAL COMPRESSIVE OR TENSILE LOAD
WK32365 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
Proposed Revision of
G5-94(2004)
WK32366 Standard Practice for Laboratory Immersion Corrosion Testing of Metals
Proposed Revision of
G31-72(2004)
WK32367 Standard Specification for Titanium and Titanium Alloy Wire
Proposed Revision of
B863-10
WK32368 Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
Proposed Revision of
F2010/F2010M-10
WK32369 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
Proposed Revision of
D4280-08
WK32373 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
Proposed Revision of
A1038-10a
WK32376 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
Proposed Revision of
D6583-04(2010)
WK32378 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-10
WK32381 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
Proposed Revision of
A229/A229M-99(2005)
WK32382 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-10
WK32388 Flammability Requirements for absorptive padding used in amusement ride vehicles
WK32391 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
Proposed Revision of
D5839-96(2006)
WK32392 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
Proposed Revision of
D5188-10a
WK32393 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
Proposed Revision of
D5188-10a
WK32396 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
Proposed Revision of
E1155-96(2008)
WK32397 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
Proposed Revision of
E1486-98(2010)
WK32398 Standard Test Method for Measuring Floor Flatness & Pavement Smoothness Using a Straightedge
WK32399 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-10a
WK32403 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-09
WK32405 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
Proposed Revision of
D7239-06
WK32406 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
F877-07
WK32407 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
Proposed Revision of
C1244-05ae1
WK32408 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
Proposed Revision of
C1244M-05ae1
WK32409 Standard Specification for Precast Reinforced Concrete Manhole Sections
Proposed Revision of
C478-09
WK32410 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
Proposed Revision of
C478M-09
WK32414
WK32425 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
Proposed Revision of
D1838-07
WK32426 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
Proposed Revision of
B167-08
WK32427 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
Proposed Revision of
B168-08
WK32430 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
Proposed Revision of
D3612-02(2009)
WK32431 for Sales of Personal Property
WK32432 Standard Test Method for Brinell Hardness of Metallic Materials
Proposed Revision of
E10-10
WK32433 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
Proposed Revision of
E140-07
WK32434 Standard Test Method for Leaching Solid Material in a Column Apparatus
Proposed Revision of
D4874-95(2006)
WK32445 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
Proposed Revision of
C1536-10
WK32449 Evaluating Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm Grown in the CDC Biofilm Reactor using the Single Tube Method
WK32455 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
Proposed Revision of
E2453-05
WK32459 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Proposed Revision of
A213/A213M-10a
WK32464 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
Proposed Revision of
A335/A335M-10b
WK32467 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
Proposed Revision of
A333/A333M-10
WK32468 Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
WK32469 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
Proposed Revision of
A385/A385M-09
WK32474 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Proposed Revision of
D92-05a(2010)
WK32476 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Proposed Revision of
D5453-09
WK32477 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
Proposed Revision of
D6728-01(2006)
WK32478 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
Proposed Revision of
C457/C457M-10a
WK32479 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
Proposed Revision of
C457/C457M-10a
WK32480 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
Proposed Revision of
A369/A369M-10
WK32485 Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
Proposed Revision of
F18-64(2006)
WK32486 Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
Proposed Revision of
F16-67(2006)
WK32487 Standard Specification for Brazing Filler Metals for Electron Devices
Proposed Revision of
F106-06
WK32489 Developing and Performing a Sampling Strategy to Collect Meaningful Data during the Assessment of Fungal Growth in Buildings
WK32492 Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting
Proposed Revision of
D5238-10
WK32496 Standard Specification for Seamless Copper Tube for Medical Gas Systems
Proposed Revision of
B819-00(2006)
WK32497 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
Proposed Revision of
E1413-07
WK32498 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
Proposed Revision of
C1202-10
WK32499 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Proposed Revision of
C109/C109M-08
WK32501 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
Proposed Revision of
D5498-09
WK32502 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
Proposed Revision of
D4537-04a
WK32503 Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
Proposed Revision of
D5161-04a
WK32504 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
Proposed Revision of
D5139-10
WK32505 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
Proposed Revision of
D4619-96(2004)
WK32506 Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
Proposed Withdrawal of
D6137-97(2004)
Replacement with None
WK32507 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Proposed Revision of
D92-05a(2010)
WK32513 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-10a
WK32514 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Proposed Revision of
D93-10a
WK32516 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres (Withdrawn 2005)
E903-96
WK32530 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
Proposed Revision of
F792-08
WK32531 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
Proposed Revision of
D5229/D5229M-92(2010)
WK32534 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
Proposed Revision of
D1837-02a(2007)
WK32535 Establishing Limit Values for Residues on Single use Implants
WK32536 Standard Test Method for Determining Filter Blocking Tendency
Proposed Revision of
D2068-10
WK32537 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
Proposed Revision of
C497-05
WK32538 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
Proposed Revision of
C497M-05
WK32539 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
Proposed Revision of
C1103-03(2009)
WK32540 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
Proposed Revision of
C1103M-03(2009)
WK32541 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
Proposed Revision of
C1214-02(2009)
WK32542 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
Proposed Revision of
C1214M-02(2009)
WK32543 Corn Starch Fermentation
WK32544 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
Proposed Revision of
C457/C457M-10a
WK32545 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-10
WK32546 Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
D4750-87(2001)
WK32547 4-to 60-in. [100- to 1500-mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe Containing Recycled PE and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications
WK32552 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
Proposed Revision of
C685/C685M-10
WK32553 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
Proposed Revision of
C1513-10
WK32554 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
Proposed Revision of
C1513-10
WK32555 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
Proposed Revision of
C1513-10
WK32556 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
Proposed Revision of
G65-04(2010)
WK32557 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
Proposed Revision of
E971-88(2003)
WK32558 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
Proposed Revision of
B166-08
WK32559 Standard Specification for Nickel Alloy Forgings
Proposed Revision of
B564-10
WK32562 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-10c
WK32564 Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots
WK32565 Guide For the Use of Non Parametric Statistical Methods - Part 1
WK32566 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK32567 Recovering the Aqueous Phase from Asphalt Emulsions
WK32568 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
Proposed Revision of
D7042-10
WK32569 for Designated and Non-Designated Snow Sliding/Coasting Slopes
WK32570 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
Proposed Revision of
C311-07
WK32571 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
Proposed Revision of
C490/C490M-10
WK32572 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
Proposed Revision of
D5705-03(2008)
WK32573 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
Proposed Revision of
D6021-06
WK32574 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
Proposed Revision of
D7621-10
WK32576 Standard Test Method for Autoignition Temperature of Liquid Chemicals
Proposed Revision of
E659-78(2005)
WK32582 Pole vault box
WK32583 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
Proposed Revision of
C511-09
WK32585 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
Proposed Revision of
B96/B96M-06
WK32586 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
Proposed Revision of
C361-08
WK32587 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
Proposed Revision of
E582-07
WK32588 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
Proposed Revision of
A923-08
WK32589 Standard Terminology Relating to Forensic Science
Proposed Revision of
E1732-09
WK32590 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ISO/ASTM51204-04
Replacement with ISO/ASTM51702-04
WK32591 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
Proposed Revision of
A1039/A1039M-10
WK32595 Standard Guide for Use of Joint Sealants
Proposed Revision of
C1193-09
WK32597 Activity of Fluid Cracking Catalyst in A Fluid Bed Reactor
WK32607 Standard Test Method for Pier Test for Refractory Mortars
Proposed Revision of
C199-84(2005)
WK32608 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
Proposed Revision of
C1453-00(2006)
WK32612 Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
Proposed Revision of
D1568-05
WK32613 Minimum Performance Requirements of Glove-type Metal Detector Standard for Use in Safety and Security
WK32615 Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
Proposed Withdrawal of
F745-07
Replacement with None
WK32617 Black, Metric-Sized Crosslinked Polyethylene (PEX) Pipe
WK32618 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
Proposed Revision of
D2950/D2950M-10
WK32621 EVALUATING POTENTIAL HAZARD DUE TO METHANE IN THE VADOSE ZONE
WK32626 Backscatter X-ray Radiography
WK32628 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
Proposed Withdrawal of
E902-05
Replacement with None
WK32629 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
Proposed Revision of
A1063/A1063M-10
WK32630 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Proposed Revision of
A653/A653M-10
WK32631 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
Proposed Revision of
E582-07
WK32632 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
Proposed Revision of
E1162-06
WK32633 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
Proposed Revision of
E1438-06
WK32634 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
Proposed Revision of
E1504-06
WK32635 Standard Guide for Performing Sputter Crater Depth Measurements
Proposed Revision of
E1634-02(2007)
WK32637 Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through LoadRange E
WK32638 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
Proposed Revision of
E2627-10
WK32643 Standard Test Method for Silica—n-Dibutyl Phthalate Absorption Number
Proposed Revision of
D6854-03(2008)
WK32645 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
Proposed Revision of
D6845-02(2008)
WK32646 Standard Specification for Medical Screwdriver Bits
Proposed Revision of
F116-00(2009)
WK32647 Standard Specification and Test Methods for Metallic Medical Bone Screws
Proposed Revision of
F543-07e1
WK32649 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32650 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32651 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32652 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32653 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK32654 Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
WK32657 Determination of Adjusted Compliance Ratio-Based Stress-Intensity Factor Range
WK32658 Testing the Shear Bond Strength of a Stone Tile
WK32659 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
Proposed Revision of
D6119-05
WK32661 Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
Proposed Revision of
D6283-05
WK32662 Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
Proposed Revision of
D6540-05
WK32663 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
Proposed Revision of
D6962-05
WK32664 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
Proposed Revision of
C76-11
WK32665 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
Proposed Revision of
C76M-11
WK32666 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
Proposed Revision of
C506-11
WK32667 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
Proposed Revision of
C506M-11
WK32668 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
Proposed Revision of
C507-11
WK32669 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
Proposed Revision of
C507M-11
WK32672 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
Proposed Revision of
C924-02(2009)
WK32673 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
Proposed Revision of
C40-04
WK32674 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
Proposed Revision of
C924M-02(2009)
WK32675 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A510M-08
Replacement with A510-08
WK32676 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752-04(2010)
Replacement with A510-08
WK32677 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A752M-04(2010)
Replacement with A510-08
WK32680 Standard Guide for Selection of Security Control Systems
Proposed Revision of
F1465-03
WK32681 Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
Proposed Revision of
E1810-96(2004)
WK32686 Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
Proposed Withdrawal of
D1641-04
Replacement with None
WK32688 Evaluating Structural Composite Lumber Binder Adhesives
WK32740 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
Proposed Revision of
A820/A820M-06
WK32742 Standard Specification for Steel Wire for Masonry Joint Reinforcement
Proposed Revision of
A951/A951M-06
WK32743 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
Proposed Revision of
A1060/A1060M-10
WK32753 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
Proposed Revision of
A965/A965M-10
WK32756 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
Proposed Revision of
D6243-09
WK32757 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
Proposed Revision of
D1413-07e1
WK32759 Standard Specification for Ureteral Stents
Proposed Revision of
F1828-97(2006)
WK32760 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
Proposed Revision of
D1238-10
WK32763 Standard Test Method for Ash Content in Plastics
Proposed Revision of
D5630-06
WK32764 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Samples by Using Hydrostatic Pore Pressure
WK32765 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
Proposed Revision of
D7454-08
WK32766 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
Proposed Revision of
D4637/D4637M-10
WK32767 Monotonic Axial Tensile Properties of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
WK32768 Standard Practice for Using Significant Digits in Geotechnical Data
Proposed Revision of
D6026-06
WK32769 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Proposed Revision of
D3828-09
WK32774 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
Proposed Revision of
E831-06
WK32776 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
Proposed Revision of
D6080-10
WK32779 Standard Specification for Mineral Hydraulic Oils
Proposed Revision of
D6158-10
WK32780 Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
Proposed Revision of
F1447-06
WK32781 Standard Specification for Helmets Used in Pole Vaulting
Proposed Revision of
F2400-06
WK32782 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Proposed Revision of
D3950-10b
WK32783 Standard Terminology for Paint, Related Coatings, Materials, and Applications
Proposed Revision of
D16-11
WK32784 Standard Specification for Compostable Plastics
Proposed Revision of
D6400-04
WK32788 Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products
Proposed Revision of
D6525-00(2006)
WK32789 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
Proposed Revision of
D6566-00(2006)
WK32790 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
Proposed Revision of
D6567-00(2006)
WK32791 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
Proposed Revision of
D6575-00(2006)
WK32792 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-10
WK32793 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK32794 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
Proposed Revision of
D1586-08a
WK32795 Evaluating the Performance of Electrochromic Devices in Sealed Insulating Glass Units
WK32796 Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area in Inhalation Exposure Chambers Using Gas Adsorption
WK32797 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
Proposed Revision of
C387/C387M-11
WK32798 Standard Guide for Communication of Assessor and Panel Performance
WK32800 Personnel Decontamination System to be Used During a Biological Event
WK32802 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
Proposed Revision of
F2897-11
WK32803 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11e1
WK32804 Personnel Decontamination System to be Used During a Radiological Event
WK32805 Disintegration of compostable plastics and products in a pilot scale aerobic composting system
WK32806 Standard Specification for Portland Cement
Proposed Revision of
C150/C150M-09
WK32809 Standard Guide for Cell Culture Analysis with SIMS
Proposed Revision of
E1881-06
WK32810 Standard Practice for Tissue Cryosection Analysis with SIMS
Proposed Revision of
E1880-06
WK32818 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK32822 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
Proposed Revision of
D6708-08
WK32823 In vitro production of Clostridium difficile spores
WK32827 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
Proposed Revision of
E2144-01(2007)
WK32829 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
Proposed Revision of
E2148-11a
WK32833 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
Proposed Revision of
D4052-09
WK32834 Standard Practice for Competence of Air Emission Testing Bodies
Proposed Revision of
D7036-04(2011)
WK32835 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
Proposed Revision of
E499-95(2006)
WK32837 Determination of Titanium Treatment Weight or Thickness on Metal Substrates by Energy Dispersive X-Ray Fluorescence Spectrometry
WK32839 Standard Practice for Conditioning Electrical Insulating Materials for Testing
Proposed Revision of
D6054-97(2004)
WK32840 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
Proposed Revision of
D3426-97(2004)
WK32841 Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
Proposed Revision of
C1604/C1604M-05
WK32845 Determination of Benzo-a-Pyrene (BaP) Content in Carbon Black
WK32848 Determination of the number Average molecular weight of PET yarns based on a relative viscosity value
WK32850 Analysis of extractable components of polymeric compounds
WK32853 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2011)
D6723-02
WK32854 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
Proposed Revision of
D6063-96(2006)
WK32855 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
Proposed Revision of
D95-05(2010)
WK32858 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-08
WK32859 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
Proposed Revision of
D2561-95(2005)
WK32860 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
Proposed Revision of
D2659-95(2005)
WK32861 Standard Specification for Total Knee Prosthesis
Proposed Revision of
F2083-10
WK32862 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
Proposed Revision of
C387/C387M-11
WK32864 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
Proposed Revision of
D6930-10
WK32865 Determination of the 99%/95% Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
WK32866 Within-laboratory Quantitation Estimate (WQE)
WK32868 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
Proposed Revision of
D7202-06
WK32870 Standard Practice for Quality Control of Geosynthetic Clay Liners
Proposed Revision of
D5889-97(2008)
WK32874 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK32887 Determining Antifungal Activity of Natural or Synthetic Substrates Treated with Bound or Leaching Antimicrobial Agents
WK32888 Determination of the resistance of marble to thermal and moisture cycling
WK32889 Assessing the Toxicity of the Water Accommodating Extracts From Lubricants Using A Luminescent Marine Bacteria Test
WK32890 Standard Test Methods for Water Vapor Transmission of Materials
Proposed Revision of
E96/E96M-10
WK32891 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
Proposed Revision of
B706-00(2006)
WK32892 Standard Specification for Seamless Copper Alloy Pipe and Tube
Proposed Revision of
B315-06
WK32893 Training for Level II Rope Rescue (R2) Operations level Endorsement
WK32894 Training for Level III Rope Rescue (R3) Technician Level Endorsement
WK32895 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
Proposed Revision of
D5397-07
WK32896 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
Proposed Revision of
D6388-99(2005)
WK32897 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
Proposed Revision of
D5819-05
WK32899 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
Proposed Revision of
D5885-06
WK32900 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
Proposed Revision of
D6389-99(2005)
WK32901 Heat Flow Calibration of Differential Scanning Calorimeters Using High Rates
WK32902 Temperatures Calibration of Differential Scanning Calorimetry and Differential Thermal Analyzers Using High Rates
WK32903 Standard Test Method for Determining Ignition Temperature of Plastics
Proposed Revision of
D1929-10
WK32905 Standard Test Methods for Mechanical Fasteners in Wood
Proposed Revision of
D1761-06
WK32906 Wood Timber Pegs
WK32908 Quantitative Petri Plate Method (QPM) for Testing Antimicrobial Towelette Products
WK32909 Standard Guide for Sampling Wastewater With Automatic Samplers
Proposed Revision of
D6538-10
WK32910 Standard Terminology for Waste and Waste Management
Proposed Revision of
D5681-09
WK32912 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK32913 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
Proposed Revision of
D4944-04
WK32915 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Proposed Revision of
A194/A194M-10a
WK32916 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
Proposed Revision of
D1593-09
WK32917 Standard Test Method for Color Determination of Plastic Pellets
Proposed Revision of
D6290-05e1
WK32918 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
Proposed Revision of
E2567-11
WK32919 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
Proposed Revision of
B228-04
WK32920 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
Proposed Revision of
D3030-95(2006)
WK32921 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
Proposed Revision of
D2287-96(2010)
WK32922 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
Proposed Revision of
B163-08
WK32923 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
Proposed Revision of
B423-05(2009)
WK32924 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
Proposed Revision of
B424-05(2009)
WK32925 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
Proposed Revision of
B425-99(2009)
WK32928 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
Proposed Withdrawal of
D4314-05
Replacement with None
WK32929 Radiation Thermometer Manual
WK32930 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
Proposed Revision of
D1042-06
WK32932 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
Proposed Revision of
D4496-04e1
WK32933 Standard Test Methods for Thickness of Solid Electrical Insulation
Proposed Revision of
D374-99(2004)
WK32934 Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
Proposed Revision of
D374M-99(2005)
WK32935 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
Proposed Revision of
D7698-11
WK32936 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK32937 Determining Acceptable Non-hazardous Filling Substances for Packagings Subjected to the United Nations Performance Tests
WK32940 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
Proposed Revision of
F1473-07
WK32941 Index Test for the Resistance to Initiation of Fast Fracture in Plastic Pipes
WK32942 Standard Test Method for Determining Ignition Temperature of Plastics
Proposed Revision of
D1929-10
WK32943 Standard Test Method for Determining Ignition Temperature of Plastics
Proposed Revision of
D1929-10
WK32944 Standard Specification for Calcium Phosphate Coatings for Implantable Materials
Proposed Revision of
F1609-08
WK32945 Geospatial Data for Representing Coal Mining Features
WK32956 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method)
Proposed Revision of
D7255-06e1
WK32957 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-10
WK32958 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
Proposed Revision of
E2063-05(2011)
WK32959 Standard Terminology Relating to Concrete Pipe and Related Products
Proposed Revision of
C822-10
WK32960 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11e1
WK32963 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
Proposed Revision of
D1758-06
WK32966 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
Proposed Revision of
D4417-03
WK32967 Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
Proposed Revision of
E1697-05
WK32968 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
Proposed Revision of
F1336-07
WK32969 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-10
WK32970 Water Resitance of Paper-based Water-resistive barriers
WK32972 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
Proposed Revision of
D2017-05
WK32975 Standard Specification for Rigid Cellular Polystyrene Geofoam
Proposed Revision of
D6817-07
WK32977 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
Proposed Revision of
A789/A789M-10a
WK32978 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Proposed Revision of
A790/A790M-10
WK32979 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
Proposed Revision of
F2695-07
WK32980 Sensory Analysis-Tetrad Test
WK32981 Analysis of Ethyl Tertiary-Butyl Ether By Gas Chromatography
WK32982 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
Proposed Revision of
D6413-08
WK32983 Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
Proposed Revision of
F585-94(2007)
WK32988 Standard Practice for Extensometers Used in Rock
Proposed Revision of
D4403-84(2005)
WK32989 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
Proposed Revision of
D6230-98(2005)
WK32990 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
Proposed Revision of
D6598-07
WK32991 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
Proposed Revision of
D7299-06
WK32992 Standard Practice for Pre-installation Acceptance Testing of Vibrating Wire Piezometers
WK32993 Standard Test Methods for Hookup Wire Insulation
Proposed Revision of
D3032-10
WK32994 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
Proposed Revision of
D3850-94(2006)
WK32995 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
Proposed Revision of
D635-10
WK32998 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
Proposed Revision of
E2029-99(2004)
WK32999 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
Proposed Revision of
E1677-05
WK33000 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Proposed Revision of
E2357-05
WK33001 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
Proposed Revision of
D2655-00(2006)
WK33002 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
Proposed Revision of
D2308-07
WK33003 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
Proposed Revision of
D3554-07
WK33004 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
Proposed Revision of
D3349-06
WK33005 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation
Proposed Revision of
D3555-07
WK33006 Impingement Testing of Lumbar Total Disc Prostheses
WK33008 the mechanical characterization of cervical and lumbar total disc prostheses
WK33010 Standard Guide for Annual Review of Test Methods and Specifications for Plastics
Proposed Revision of
D4968-09
WK33012 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-11
WK33013 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
Proposed Revision of
B354-05
WK33015 Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission
Proposed Revision of
E2478-06a
WK33016 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
Proposed Revision of
E1106-07
WK33017 Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
WK33018 Acoustic Emission Examination of Steam Piping
WK33019 Structural Health Monitoring Using Acoustic Emission
WK33020 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-10a
WK33021 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-10a
WK33022 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
Proposed Revision of
C1335-04(2009)
WK33025 Standard Terminology Relating to Forensic Psychophysiology
Proposed Revision of
E2035-10a
WK33026 Standard Consumer Safety Specification for Crib Mattresses
WK33027 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
Proposed Revision of
F2787-09
WK33028 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
Proposed Revision of
F2418-09a
WK33029 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
Proposed Revision of
D6489-99(2006)
WK33030 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
Proposed Revision of
D6490-99(2006)
WK33031 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
Proposed Revision of
D6532-00(2006)
WK33035 Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
Proposed Withdrawal of
E1507-98(2003)
Replacement with None
WK33036 Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
Proposed Revision of
D1442-06
WK33037 Standard Guide for X-Ray Emission Spectrometric Analysis
Proposed Revision of
E1621-05
WK33042 Standard Terminology and Acronyms Relating to Corrosion
Proposed Revision of
NACE/ASTMG193-11
WK33059 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-10
WK33060 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK33061 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK33068 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
Proposed Revision of
D1611-00(2010)
WK33069 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
Proposed Revision of
D7408-08
WK33070 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
Proposed Revision of
B543-07e1
WK33073 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
Proposed Revision of
F1667-11
WK33074 Standard Specification for Threadless Copper Pipe, Standard Sizes
Proposed Revision of
B302-07
WK33077 Standard Specification for Nitration Grade Toluene
Proposed Revision of
D841-10
WK33080 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Proposed Revision of
F1216-09
WK33081 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F1743-08
WK33082 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F2019-03(2009)
WK33083 A Segmental Panel System for the Grout-in-Place-Liner (GIPL)Rehabilitation Method of Existing Man-Entry Sewers, Culverts, and Conduits
WK33088 Installation of a Segmental Panel System and Cementitious Grout for Rehabilitation of Existing Sewers, Culverts, and Conduits
WK33089 The Design of Close-Fit Liners in a Pressure Application
WK33090 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
Proposed Revision of
A700-05
WK33091 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
Proposed Revision of
D4306-07
WK33092 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
Proposed Revision of
D2624-09
WK33093 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
Proposed Revision of
D3241-09e1
WK33094 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Proposed Revision of
D6751-11a
WK33095 Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
Proposed Revision of
F718-07
WK33096 Field Test Determination of Aqueous Urea-Based Diesel Exhaust Fluid Concentration
WK33097 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-09
WK33098 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
Proposed Revision of
E741-00(2006)e1
WK33099 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
Proposed Revision of
E1554-07
WK33100 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
Proposed Revision of
E1827-96(2007)
WK33101 Standard Test Method for Pour Point of Petroleum Products
Proposed Revision of
D97-09
WK33102 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
Proposed Revision of
E1998-02(2007)
WK33103 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
Proposed Revision of
D2270-10e1
WK33104 Standard Test Method for Cloud Point of Petroleum Products
Proposed Revision of
D2500-09
WK33105 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Proposed Revision of
D445-11
WK33106 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
Proposed Revision of
D446-07
WK33107 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
Proposed Revision of
D5771-10
WK33108 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
Proposed Revision of
D5773-10
WK33109 Standard Test Method for Pour Point of Crude Oils
Proposed Revision of
D5853-09
WK33110 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
Proposed Revision of
D7153-05(2010)
WK33111 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
Proposed Revision of
D7154-05(2010)
WK33112 Standard Specification for Seamless Stainless Steel Mechanical Tubing
Proposed Revision of
A511/A511M-08
WK33115 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
Proposed Revision of
D4944-04
WK33116 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
Proposed Revision of
F1930-11
WK33117 Standard Guide for Cathodic Protection of Polyethylene Encased Ductile Iron Pipe
WK33119 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
Proposed Revision of
D5744-07e1
WK33120 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
Proposed Revision of
E2368-10
WK33121 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
Proposed Revision of
D494-04(2010)e1
WK33124 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
Proposed Revision of
C1691-09
WK33125 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
Proposed Revision of
C1692-10
WK33128 Standard Practice for Handling, Transportation and Storage of Halon 1211 (CF2BrCl)
WK33129 Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)
Proposed Revision of
D5632-08
WK33132 Chocks, Panama, Mooring Cast Steel
WK33133 Chocks, Ship Mooring, Cast Steel
WK33134 Standard Test Method for Determination of Cyclohexane Extinction of Carbon Black
WK33135 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
Proposed Revision of
D7225-06
WK33136 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
Proposed Revision of
D2501-91(2005)
WK33137 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
Proposed Revision of
E2061-09a
WK33138 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
Proposed Revision of
E2660-10
WK33139 Standard Digital Reference Images for Titanium Castings
Proposed Revision of
E2669-10
WK33141 Standard Specification for Agencies Performing Nondestructive Testing
Proposed Revision of
E543-09
WK33142 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
Proposed Revision of
E1212-09
WK33143 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
Proposed Revision of
E1359-09
WK33144 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
Proposed Revision of
F1926/F1926M-10
WK33148 Eddy-Current Testing of Conducting Materials Using Conformable Sensor Arrays
WK33149 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
Proposed Revision of
C441-05
WK33150 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
Proposed Revision of
C586-05
WK33151 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-11
WK33152 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
Proposed Revision of
D7310-07
WK33154 Standard Specification for Stationary Outdoor Fitness Equipment
WK33155 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
Proposed Revision of
C1585-04e1
WK33156 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-11
WK33157 Standard Specification for Blended Hydraulic Cements
Proposed Revision of
C595/C595M-10
WK33158 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
Proposed Revision of
F739-07
WK33159 Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
Proposed Revision of
F1359-07
WK33162 Standard Practice for Chemical Protective Clothing Program
Proposed Revision of
F1461-07
WK33163 Standard Specification for Plastic (Stucco) Cement
Proposed Revision of
C1328-05
WK33166 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
Proposed Revision of
C1359-05
WK33170 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
Proposed Revision of
D5745-09
WK33171 Standard Classification System for Specifying Plastic Materials
Proposed Revision of
D4000-11
WK33172 Standard Guide for Writing Material Standards in the Classification D4000 Format
Proposed Revision of
D5740-09
WK33173 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
Proposed Revision of
D4634-11
WK33174 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
Proposed Revision of
D6358-06
WK33175 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
Proposed Revision of
D7292-06
WK33176 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
Proposed Revision of
D7293-06
WK33177 Standard Specification for Sulfone Plastics (SP)
Proposed Revision of
D6394-10
WK33178 Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
Proposed Revision of
F1159-03a
WK33185 Standard Specification for Copper Alloys in Ingot Form
Proposed Revision of
B30-10
WK33186 Standard Specification for Copper Alloy Sand Castings for General Applications
Proposed Revision of
B584-09a
WK33188 Standard Terminology Relating to Plastic Piping Systems
Proposed Revision of
F412-09
WK33191 Standard Test Method for Total Ash in Leather
Proposed Revision of
D2617-06
WK33192 Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
Proposed Revision of
C1425-05
WK33193 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
Proposed Revision of
F1178-01(2007)
WK33195 Standard Specification for Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4814-10b
WK33196 Standard Test Method for Paired Preference Test
Proposed Revision of
E2263-04
WK33197 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
Proposed Revision of
C1358-05
WK33198 Standard Specification for Welded Copper-Alloy Pipe
Proposed Revision of
B608-07
WK33199 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
Proposed Revision of
C1358-05
WK33201 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
Proposed Revision of
C534/C534M-08
WK33205 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
Proposed Revision of
F2855-11
WK33206 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
D2846/D2846M-09be1
WK33207 61-11-05 Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDRPR)
WK33209 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
Proposed Revision of
B249/B249M-11
WK33210 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
Proposed Revision of
B944-06(2011)
WK33211 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
Proposed Revision of
B640-07
WK33213 Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
Proposed Revision of
E879-01(2007)
WK33219 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
Proposed Revision of
C1482-10
WK33220 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
Proposed Revision of
D4754-98(2003)
WK33221 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
Proposed Revision of
F628-08
WK33224 Bearing Steels for High Load Applications
WK33225 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
Proposed Revision of
C665-06
WK33226 Standard Specification for Design and Performance of a Light Sport Glider
Proposed Revision of
F2564-10
WK33227 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-10c
WK33228 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
Proposed Revision of
D2132-03
WK33230 Standard Practice for Installation of Chain-Link Fence
Proposed Revision of
F567-11
WK33231 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
Proposed Revision of
C443-10
WK33232 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
Proposed Revision of
C443M-10
WK33233
Proposed Revision of
WK33234 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A781/A781M-08
WK33235 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils - Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
Proposed Revision of
D7668-10
WK33236 Calibration of hand-held moisture meters for use on gypsum boards and panels
WK33239 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
Proposed Revision of
E2663-08
WK33240 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
Proposed Revision of
E2699-10
WK33241 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
Proposed Revision of
E2738-10
WK33242 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
Proposed Revision of
E2767-10
WK33244 Standard Performance Specification for Hydraulic Cement
Proposed Revision of
C1157/C1157M-10
WK33245 the Identification of Gypsum Panels Emitting Sulfide Gasses
WK33246 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-11a
WK33247 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
Proposed Revision of
C384-04
WK33249 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D4806-11
WK33250 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
Proposed Revision of
D5983-06(2011)
WK33256 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements (Withdrawn 2011)
B344-01
WK33257 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Proposed Revision of
D2726-10
WK33258 Standard Practice for Pictorial Markings for Handling of Goods
Proposed Revision of
D5445-05
WK33259 Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
WK33260 Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Navigation Tasks: Random Mazes with Complex Terrain
WK33261 Evaluating Emergency Response Robot Capabilities: Sensors: Video: Pan, Tilt, and Zoom Tasks: Complete
WK33262 Evaluating Emergency Response Robot Capabilities: Safety and Environmental: Decontamination/Washdown for FEMA Urban Search and Rescue Teams
WK33263 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
Proposed Revision of
C1202-10
WK33264 Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
Proposed Revision of
F1001-99a(2006)
WK33266 Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
Proposed Revision of
F2061-08
WK33267 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
Proposed Revision of
F2130-09
WK33268 Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
Proposed Revision of
F2669-09
WK33269 Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
Proposed Revision of
C1629/C1629M-06
WK33270 Recording Occupational Injuries and Illnesses
WK33276 Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
Proposed Revision of
E128-99(2005)
WK33280 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-10
WK33284 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Proposed Revision of
D6890-11
WK33290 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
Proposed Revision of
C1165-90(2005)
WK33291 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
Proposed Revision of
E1818
WK33293 Standard Specification for Grades UL82 and UL87 Unleaded Aviation Gasoline
Proposed Revision of
D6227-10
WK33294 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
Proposed Revision of
D3241-09e1
WK33296 Standard Practice for Preparation of Fire-Test-Response Standards
Proposed Revision of
E535-09
WK33300 Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
Proposed Withdrawal of
D2741-95(2005)
Replacement with None
WK33301 Standard Specification for Climbing Harnesses
Proposed Revision of
F1772-99(2005)
WK33302 Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates1
WK33304 Standard Test Method for Total Moisture in Coal
Proposed Revision of
D3302/D3302M-10
WK33309 Statistical Treatment of Ties, No Preference and No Difference Counts
WK33311 Use of Foundry Sand in Structural Fill and Embankments
WK33312 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-11a
WK33313 non-sterile isolation gowns intended for use in health care facilities
WK33314 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
Proposed Revision of
E1123-86(2009)
WK33323 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
Proposed Revision of
D7243-06a
WK33324 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
Proposed Revision of
D7100-06
WK33325 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
Proposed Revision of
D4511-00(2006)
WK33326 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
Proposed Revision of
D4381-06
WK33327 Standard Test Method for Density of Bentonitic Slurries
Proposed Revision of
D4380-84(2006)
WK33328 Standard Practice for Liquid Penetrant Testing
Proposed Revision of
E1417-05e1
WK33330 Standard Terminology Relating to Roofing and Waterproofing
Proposed Revision of
D1079-10
WK33331 Standard Specification for Powder Metallurgy (PM) Titanium Metal and Alloy Structural Components
WK33343 Total Fluorine and Chlorine in Coal, Coke, and their Residues by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
WK33345 Standard Specification for Heavy Vehicular Paving Brick
Proposed Revision of
C1272-10
WK33346 Standard Specification for Heavy Vehicular Paving Brick
Proposed Revision of
C1272-10
WK33347 Standard Specification for Cartridge Brass Cartridge Case Cups
Proposed Revision of
B129-07
WK33348 Standard Specification for Copper Alloy Bullet Jacket Cups
Proposed Revision of
B131-07
WK33349 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
Proposed Revision of
B747-07
WK33350 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
Proposed Revision of
A350/A350M-10
WK33351 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
Proposed Revision of
C799-99(2005)
WK33352 Metric-Sized Crosslinked Polyethylene (PEX) Pipe, Fittings, and Joints For Gas Applications
WK33353 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
Proposed Revision of
F68-10
WK33354 Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range
WK33355 Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range
WK33356 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
Proposed Revision of
F318-06
WK33357 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-08
WK33358 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
Proposed Revision of
B101-07
WK33359 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B248-07
WK33360 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
Proposed Revision of
B248M-07
WK33361 Bulk Electrical Conductivity of Hardened Concrete
WK33362 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
Proposed Revision of
B967/B967M-10a
WK33363 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
Proposed Revision of
B124/B124M-11
WK33365 Standard Specification for Polyoxymethylene (Acetal) for Medical Applications
Proposed Revision of
F1855-00(2005)
WK33366 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-10
WK33369 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-10
WK33370 Standard Terminology of Powder Metallurgy
Proposed Revision of
B243-10
WK33371 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
Proposed Revision of
D3531-99(2009)
WK33372 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
Proposed Revision of
F67-06
WK33373 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
Proposed Revision of
E1221-10
WK33374 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
Proposed Revision of
D3532-99(2009)
WK33375 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
Proposed Revision of
A312/A312M-11
WK33376 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
Proposed Revision of
A312/A312M-11
WK33377 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
Proposed Revision of
B265-10
WK33378 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Proposed Revision of
A790/A790M-10
WK33380 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK33381 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
Proposed Revision of
E2554-07
WK33382 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
Proposed Revision of
D5448/D5448M-93(2006)
WK33383 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
Proposed Revision of
D5449/D5449M-93(2006)
WK33384 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Proposed Revision of
D5450/D5450M-93(2006)
WK33392 Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors using Jet Impingement Apparatus1
WK33393 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
Proposed Revision of
F2082-06
WK33394 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
Proposed Revision of
F2390-07
WK33395 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
Proposed Revision of
A234/A234M-11
WK33396 Specifying, Measuring, and Managing Impact Attenuation of Synthetic Turf Playing Systems.
WK33398 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
Proposed Revision of
G124-10
WK33399 Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
Proposed Revision of
F91-06
WK33400 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
Proposed Revision of
E2088-06
WK33401 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
Proposed Revision of
E2090-06
WK33402 Standard Specification for Copper Alloy Continuous Castings
Proposed Revision of
B505/B505M-10
WK33406 Standard Safety and Performance Specification for Soccer Goals
WK33407 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
Proposed Revision of
E1600-07
WK33408 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
Proposed Revision of
E1805-07
WK33409 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
Proposed Revision of
E1898-07
WK33410 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
Proposed Revision of
E2242-07
WK33411 Hot Isostatic Pressing of Steel and Alloy Castings
WK33414 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
Proposed Revision of
B646-06a
WK33416 Specification for Stainless Chromium-Nickel Steel-Clad Plate
Proposed Revision of
A264-09
WK33417 Statistical Equivalence Testing
WK33418 Detecting Sulfates in Construction Soil Materials
WK33419 The Calibration and Testing of Contact Surface Temperature Sensors.
WK33421 Gravity or Patron Controlled Non-mechanical Spherical Devices
WK33423 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
Proposed Revision of
E574-06
WK33424 Standard test method for detecting detrimental intermetallic phases in lean duplex austenitic/ferritic stainless steels
WK33425 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Proposed Revision of
D3666-09a
WK33426 Standard Specification for Industrial Woven Wire Cloth
Proposed Revision of
E2016-06
WK33427 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
Proposed Revision of
D5404/D5404M-11
WK33432 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
Proposed Revision of
A20/A20M-10
WK33433 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-10
WK33434 Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Epifluorescence Microscopy
WK33442 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
Proposed Revision of
A450/A450M-10
WK33443 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
Proposed Revision of
A530/A530M-04a(2010)
WK33445 Standard Consumer Safety Specification for Full-Size Baby Cribs
Proposed Revision of
F1169-10a
WK33446 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
Proposed Revision of
C764-07
WK33448 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
Proposed Revision of
D7089-06
WK33449 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
Proposed Revision of
D7682-10
WK33450 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
Proposed Revision of
C1710-09
WK33451 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
Proposed Revision of
C1534-07e1
WK33452 Performance of Demand Control Ventilation Systems for Commercial Kitchen Exhaust Systems
WK33453 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
Proposed Revision of
E585/E585M-09
WK33454 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
Proposed Revision of
C1040/C1040M-08
WK33455 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
Proposed Revision of
C1277-09a
WK33456 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
Proposed Revision of
C564-09a
WK33458 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
Proposed Revision of
C1589-05
WK33460 Standard Specification for General Requirements for Horizontally Centrifugal Cast Carbon, Alloy, and Stainless Steel Pipe
WK33461 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Proposed Revision of
A1003/A1003M-11
WK33463 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
Proposed Revision of
D5498-09
WK33464 Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
Proposed Revision of
F2393-10
WK33466 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
Proposed Revision of
F835-04e1
WK33467 Standard Specification for Alloy Steel Socket Set Screws
Proposed Revision of
F912-04e1
WK33468 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
Proposed Revision of
D1882-96(2006)
WK33469 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
Proposed Revision of
D5931-96(2007)
WK33470 Standard Test Methods for Microcellular Urethane Materials
Proposed Revision of
D3489-06
WK33471 Standard Test Method for Microcellular Urethanes-Flexural Recovery
Proposed Revision of
D3768-06
WK33472 Standard Practice for Probability Sampling Of Materials
Proposed Revision of
E105-10
WK33473 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
Proposed Revision of
D3679-09a
WK33474 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
Proposed Revision of
D4226-10
WK33477 Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
Proposed Revision of
D4179-01(2006)
WK33487 Standard Practice for Installing Piezoelectric Highway Traffic Sensors
Proposed Revision of
E2415-05
WK33488 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
Proposed Revision of
D7582-10
WK33490 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
Proposed Revision of
F86-04(2009)
WK33492 Standard Practice for Conducting Ruggedness Tests
Proposed Revision of
E1169-07
WK33493 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
Proposed Revision of
E1921-10e1
WK33494 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
Proposed Revision of
E1256-11
WK33505 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK33511 Standard Specification for Heavy Duty Sheathed Wood Crates
Proposed Revision of
D7478/D7478M-08e1
WK33512 Standard Specification for Open and Covered Wood Crates
Proposed Revision of
D6039/D6039M-08
WK33513 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Proposed Revision of
C518-10
WK33518 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK33519 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
Proposed Revision of
B372-11
WK33521 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A688/A688M-11
WK33522 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A803/A803M-11
WK33523 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
Proposed Revision of
B950-11
WK33524 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A688/A688M-11
WK33525 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
Proposed Revision of
F1334-08
WK33526 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
Proposed Revision of
F441/F441M-09
WK33527 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
Proposed Revision of
F442/F442M-09
WK33528 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
Proposed Revision of
E350-95(2005)e1
WK33529 Standard Test Methods for Chemical Analysis of Cast Iron-All Types
Proposed Revision of
E351-93(2006)
WK33530 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
Proposed Revision of
E352-93(2006)
WK33531 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
Proposed Revision of
E353-93(2006)
WK33532 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
Proposed Revision of
E2472-06e1
WK33533 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
Proposed Revision of
E354-93(2006)
WK33534 Automated Colony Forming Unit (CFU) Assays Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture
WK33535 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
Proposed Revision of
D4812-06
WK33536 Standard Specification for General Requirements for Copper Alloy Castings
Proposed Revision of
B824-11
WK33537 Operating the Severe Wastewater Analysis Testing Apparatus
WK33538 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
Proposed Revision of
B453/B453M-08
WK33539 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
Proposed Revision of
E1306-07
WK33541 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
Proposed Revision of
D4819-96(2005)
WK33543 Use of SiC as a Temperature Monitor for Reactor Vessel Surveillance
WK33544 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
Proposed Revision of
F2373-08
WK33546 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
Proposed Revision of
A664-06e1
WK33556 Standard Practice for Installing Clay Flue Lining
Proposed Revision of
C1283-07a
WK33558 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-09
WK33561 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
Proposed Revision of
D3524-04
WK33562 Standard Terminology Relating to Clay Products
Proposed Revision of
C896-04(2009)
WK33563 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
Proposed Revision of
C393/C393M-06
WK33564 Standard Test Method for Shear Properties of Sandwich Core Materials
Proposed Revision of
C273/C273M-07a
WK33567 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
WK33568 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
Proposed Revision of
A416/A416M-10
WK33569 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
Proposed Revision of
F645-04
WK33570 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
Proposed Revision of
D4647-06e1
WK33571 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
Proposed Revision of
D6572-06
WK33572 Standard Practice for Radiological Emergency Response
Proposed Revision of
E2601-08
WK33575 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK33578 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
Proposed Revision of
E2540-08
WK33579 Standard Practice for Calculating and Using Basic Statistics
Proposed Revision of
E2586-10a
WK33581 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
Proposed Revision of
A513-08a
WK33582 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
Proposed Revision of
D2166-06
WK33583 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-10
WK33585 Standard Practice for Radiography of Cast Metallic Surgical Implants
Proposed Revision of
F629-02(2007)e1
WK33586 ASTM DXXXX API MPMS Chapter 8.1.2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products - Part 1 Manual Sampling for Crude Oil
WK33587 ASTM DXXXX, API MPMS Chapter 8.1.3 Standard Practice for Manual Sampling of Petroleum and Petroleum Products - Part 3 Manual Sampling for Liquid Petroleum Products
WK33588 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
Proposed Revision of
D4177-95(2010)
WK33589 ASTM DXXXX - API MPMS Chapter 8.2.3 Standard Practice for Automatic Sampling of Petroleum and Petroleum products- Part 3 Automatic Sampling for Liquid Petroelum Products
WK33590 In-Service Inspection, Maintenance, and Electrical Testing of Insulating Tools (Fiberglass-Reinforced Plastic [FRP] and Wooden Live-Line Tools)
WK33592 ASTM DXXX - API MPMS Chapter 8.2.2 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products - Part 2 Automatic Sampling for Crude Oil
WK33593 Standard Practice for Calculating and Using Basic Statistics
Proposed Revision of
E2586-10a
WK33596 Test method to determine the flammability of mattress sets.
WK33597 Standard Test Method for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
WK33598 Training for Land Search and Rescue (SAR) Strike Team Leader/Task Force Leader
WK33599 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK33600 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK33601 Standard Practice for Making and Curing Concrete Test Specimens in the Field
Proposed Revision of
C31/C31M-10
WK33602 Standard Test Method for Rapid Determination of Carbonate Content of Soils
Proposed Revision of
D4373-02(2007)
WK33603 Walkway Auditor Qualifications
WK33604 Standard Practice for Radiography of Cast Metallic Surgical Implants
Proposed Revision of
F629-02(2007)e1
WK33605 Standard Specification for Elastomeric Joint Sealants
Proposed Revision of
C920-11
WK33611 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
E1155M-96(2008)
Replacement with E1155-96(2008)
WK33612 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1486M-98(2010)
Replacement with E1486-98(2010)
WK33613 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
Proposed Revision of
E1793-05
WK33614 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10a
WK33615 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10a
WK33616 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10a
WK33617 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10a
WK33619 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-10a
WK33620 Standard Practice for Physical Characterization of Knitted Paint Applicator Fabrics
WK33621 Selection of Walking Surface Treatments When Considering Aggressive Contaminant Conditions
WK33622 Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2009)
D295-99(2004)
WK33623 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
Proposed Revision of
A950/A950M-99(2007)
WK33624 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
Proposed Revision of
D7422-10a
WK33625 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
Proposed Revision of
C1512-10
WK33626 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
Proposed Revision of
D6475-06
WK33627 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
Proposed Revision of
E2463-05
WK33628 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
Proposed Revision of
D7367-07
WK33629 Standard Specification for Shelter, Electrical Equipment S-250/G
Proposed Revision of
E1974-06
WK33630 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/ 2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/ 2 Ton LMTV Trailer)
Proposed Revision of
E2517-06
WK33631 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)
Proposed Revision of
E2518-06
WK33632 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
Proposed Revision of
D3212-07
WK33633 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
Proposed Revision of
D3139-98(2005)
WK33634 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C
Proposed Revision of
D1412-07
WK33635 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
Proposed Revision of
D1401-10
WK33640 Standard Test Method for Surface Moisture in Fine Aggregate
Proposed Revision of
C70-06
WK33641 Standard Guide for Selection and Use of Flame-Resistant Garments for Protection Against Combustible Dust Deflagrations
WK33642 Measurement of Rotational Viscosity of Paints, Inks or Related Liquid Materials as a Function of Temperature
WK33644 Compliance with Light Sport Aircraft Standards
WK33646 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
Proposed Revision of
F406-10b
WK33648 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
Proposed Revision of
D5759-95(2005)
WK33649 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
Proposed Revision of
E1266-88(2005)
WK33650 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-08
WK33652 Standard Test Method for Pocket Reinforcement
Proposed Revision of
D7506/D7506M-09
WK33653 Lee-Type portable hardness testing ILS#302
WK33654 Shrinkage of Carpet Backing Fabrics
WK33655 Determining the Effect of Sample Conditioning on test Results (population comparison)
WK33656 Biaxial Tension Testing of Geosynthetics
WK33657 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
Proposed Revision of
C1594-10
WK33658 Characterizing Gripping Performance of Gloves Using a Torque Meter
WK33659
WK33660 Standard guide for validating clean lines for medical devices
WK33661 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
Proposed Revision of
E1268-01(2007)
WK33663 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
Proposed Revision of
A304-05(2011)
WK33664 Analysis of Water-Soluble Nitrite in Hardened Concrete
WK33665 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
Proposed Revision of
E853-01(2008)
WK33666 Standard Guide for Standard Details for Adhered Sheet Waterproofing
Proposed Revision of
D5898-96(2005)
WK33669 Standard Specification for Carbon Steel Forgings for Piping Applications
Proposed Revision of
A105/A105M-10a
WK33671 Body Measurements for Adult Misses Petite Figure Type
WK33672 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
Proposed Revision of
C1305-08
WK33673 Standard Practice for Determining NeutronExposures for Nuclear Reactor Vessel Support Structures
Proposed Revision of
E1035-08
WK33678 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
Proposed Revision of
C1471-05
WK33679 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
Proposed Revision of
F2329-05
WK33680 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
Proposed Revision of
F2674-07
WK33681 Standard for Handheld Chemical Vapor Point Detectors (HCVPD)
WK33682 Preparation, Compaction, and Density Determination of Roller-Compacted Concrete Specimens by Means of the Superpave Gyratory Compactor
WK33683 Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
Proposed Revision of
D7605-10
WK33684 Standard for Stationary Monitoring Chemical Vapor Point Detector
WK33685 Characterizing Charged-Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
WK33686 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Proposed Revision of
C110-10
WK33687 Normal force calibration for Rotational Rheometers
WK33688 Guide For Fibers Sustainability
WK33689 Exposure and Retrieval of Samples to Evaluate Installation Damage of Polymer Coated Steel Wire Mesh
WK33690 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
Proposed Revision of
D6037-96(2008)
WK33691 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
Proposed Revision of
C1170/C1170M-08
WK33692 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
Proposed Revision of
C1152/C1152M-04e1
WK33694 Standard Specification for Tin Mill Products, General Requirements
Proposed Revision of
A623-10
WK33696 Standard Specification for Tin Mill Products, General Requirements [Metric]
Proposed Revision of
A623M-10
WK33698 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
Proposed Revision of
D7301-08
WK33702 Determination of Common Index Properties of a Rolled Erosion Control Product (RECP).
WK33704 Standard Specification for Performance of Engine Oils
Proposed Revision of
D4485-11
WK33705 Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods
WK33706 Standard Classification of Peat Samples by Laboratory Testing
Proposed Revision of
D4427-07
WK33707 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
Proposed Revision of
E874-10a
WK33708 Standard Guide for Non-destructive Examination of Paper
Proposed Revision of
E2325-05e1
WK33710 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B122/B122M-08
WK33711 Auditing Amusement Rides and Devices
WK33713 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
Proposed Revision of
E668-10
WK33714 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
Proposed Revision of
A962/A962M-11
WK33715 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-11
WK33716 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Proposed Revision of
A194/A194M-10a
WK33717 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
Proposed Revision of
A320/A320M-11
WK33718 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
Proposed Revision of
A437/A437M-10a
WK33719 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
Proposed Revision of
A453/A453M-10
WK33720 Standard Specification for Alloy-Steel Bolting for Special Applications
Proposed Revision of
A540/A540M-10a
WK33721 the Viscosity of in-service lubricant analysis
WK33722 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
Proposed Revision of
D806-00(2006)
WK33723 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
Proposed Revision of
D4223-99(2006)
WK33726 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
Proposed Revision of
D1907-07
WK33727 Standard Tolerances for Yarns Spun on the Woolen System
Proposed Revision of
D2644-02(2007)
WK33729 Standard Terminology for Yarn Spinning Systems
Proposed Revision of
D3888-07
WK33730 Standard Specification for Rigid Cellular Polystyrene Geofoam
Proposed Revision of
D6817-07
WK33731 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
Proposed Revision of
D6690-07
WK33732 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
Proposed Revision of
D5167-10
WK33733 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
Proposed Revision of
D2961-02(2007)
WK33734 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
Proposed Revision of
D1073-07
WK33735 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
Proposed Revision of
C1245/C1245M-11
WK33736 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
Proposed Revision of
D5958-99(2005)e1
WK33737 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
Proposed Revision of
D6348-03(2010)
WK33738 Standard Specification for Masonry Cement
Proposed Revision of
C91-05
WK33739 Standard Specification for Plastic (Stucco) Cement
Proposed Revision of
C1328-05
WK33740 Standard Specification for Mortar Cement
Proposed Revision of
C1329-05
WK33741 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Proposed Revision of
E23-07ae1
WK33742 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
Proposed Revision of
C443-10
WK33743 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
Proposed Revision of
C443M-10
WK33744 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
Proposed Revision of
C1628-06
WK33745 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
Proposed Revision of
C1677-09
WK33746 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
Proposed Revision of
C877-08
WK33747 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
Proposed Revision of
C877M-02(2009)
WK33748 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
Proposed Revision of
C990-09
WK33749 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
Proposed Revision of
C990M-09
WK33750 Standard Specification for Elastomeric Seals for Joining Concrete Structures
Proposed Revision of
C1619-05
WK33751 Standard Test Method for Compressive Strength of Masonry Prisms
Proposed Revision of
C1314-10
WK33752 Determining the Critical Cracking Temperature (T critical) for Asphalt Mixtures using the Indirect Tensile Test
WK33755 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Proposed Revision of
C109/C109M-11
WK33756 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
Proposed Revision of
F2589-06
WK33757 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
Proposed Revision of
F2408-09
WK33758 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
Proposed Revision of
E721-07
WK33759 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
Proposed Revision of
D3965-05
WK33761 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
Proposed Withdrawal of
C1488-04e1
Replacement with None
WK33763 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
Proposed Revision of
A20/A20M-10
WK33764 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-09b
WK33766 Standard Guide for Understanding Cyanide Species
Proposed Revision of
D6696-10
WK33767 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
Proposed Revision of
D7237-10
WK33768 Standard Specification for Reflective Insulation for Building Applications
Proposed Revision of
C1224-09
WK33769 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
Proposed Revision of
D6675-01(2006)
WK33771 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
Proposed Revision of
D1142-95(2006)
WK33772 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
Proposed Revision of
E342-04
WK33773 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
Proposed Revision of
E247-01(2005)
WK33774 Standard Test Method for the Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
Proposed Revision of
E278-01(2005)
WK33775 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
Proposed Revision of
E279-97(2005)
WK33776 Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
WK33777 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
Proposed Revision of
D6906-11a
WK33778
Proposed Revision of
WK33779 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
Proposed Revision of
F1314-07
WK33781 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
Proposed Revision of
F1868-09
WK33782 Standard Practice for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons, Liquefied Petroleum Gases and Natural Gas by Oxidative Combustion, Purge and Trap and Ultraviolet Fluorescence Detection
WK33783 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
Proposed Revision of
D6425-05(2010)e1
WK33784 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
Proposed Revision of
D746-07
WK33785 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
Proposed Revision of
C687-07
WK33786 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D7421-08
WK33787 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
Proposed Revision of
D6624-06
WK33788 Determination of Hydrocarbons and Nonhydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
WK33794 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-11
WK33795 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
Proposed Revision of
F2737-10a
WK33796 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
Proposed Revision of
C823/C823M-07
WK33797 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle (Withdrawn 2010)
D5165-93(2004)
WK33798 Standard Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer (Withdrawn 2010)
D6336-98(2004)
WK33799 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
Proposed Revision of
D6528-07
WK33800 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D7420-10
WK33801 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D5706-05
WK33802 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D5707-05
WK33803 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D5706-05
WK33804 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
Proposed Revision of
B600-09
WK33805 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
Proposed Revision of
D2047-04
WK33806 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
Proposed Revision of
F2746-09
WK33807 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes
Proposed Revision of
C1738-11
WK33808 Standard Guide for Sensory Evaluation of Products by Children
Proposed Revision of
E2299-03
WK33809 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
Proposed Revision of
D4821-07
WK33810 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
Proposed Revision of
D7359-08
WK33815 Total KF Moisture in Liquefied Petroleum Gas (LPG) by Karl Fischer Titration and Liquefied Gas Vaporizer
WK33816 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
Proposed Revision of
E927-10
WK33817 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
Proposed Revision of
E810-03(2008)
WK33818 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
Proposed Revision of
E2152-01(2006)
WK33820 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
Proposed Revision of
E1247-03
WK33821 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
Proposed Revision of
D6477-11
WK33822 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
Proposed Revision of
C1630-06
WK33825 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-11
WK33826 Standard Guide for Selection of Tests for Traffic Paints
Proposed Revision of
D2205-85(2010)
WK33827 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors supported by a Polymer Matrix Composite Core
WK33828 Carbon Fiber Composite (CFCC) Core for Aluminum Conductors, Carbon Fiber Composite Supported (ACCFCS)
WK33829 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-10
WK33830 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-11
WK33831 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
Proposed Revision of
F2435-07
WK33832 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
Proposed Revision of
F2435-07
WK33833 Additive Manufacturing Cobalt-28 Chromium-6 Molybdenum with Powder Bed Fusion
WK33834 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
Proposed Revision of
D7463-08
WK33835 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
Proposed Revision of
D6637-10
WK33836 Standard Consumer Safety Specification for Children's Folding Chairs
Proposed Revision of
F2613-10
WK33837 Standard Terminology for Geosynthetics
Proposed Revision of
D4439-04
WK33838 Estimating NAPL Transmissivity1
WK33839 Guide for Training for Level II Rope Rescue (R2) Rescuer Endorsement
WK33840 Guide for Training for Level III Rope Rescue (R3) Rescuer Endorsement
WK33841 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
C1158-05
Replacement with C1744-10
WK33842 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
Proposed Revision of
A426/A426M-11
WK33843 Using ASTM E330 for Determining Wind Load Capacity of EIFS-Clad Wall Assemblies
WK33844 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
Proposed Revision of
A451/A451M-06(2010)
WK33845 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
Proposed Revision of
A608/A608M-06
WK33846 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
Proposed Revision of
A872/A872M-07a
WK33847 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
Proposed Revision of
A660-96(2010)
WK33848 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
Proposed Revision of
E2204-11
WK33849 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
Proposed Revision of
A751-08
WK33850 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-11
WK33851 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
Proposed Revision of
D2711-10
WK33852 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
Proposed Revision of
D6792-07
WK33853 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
Proposed Revision of
A6/A6M-11
WK33854 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Proposed Revision of
A1003/A1003M-11
WK33855 Standard Test Method for Normal Consistency of Hydraulic Cement
Proposed Revision of
C187-11
WK33856 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
Proposed Revision of
F76-08
WK33857 Specification for Stainless Chromium-Nickel Steel-Clad Plate
Proposed Revision of
A264-09
WK33858 Specification for Stainless Chromium-Nickel Steel-Clad Plate
Proposed Revision of
A264-09
WK33859 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
Proposed Revision of
C341/C341M-06
WK33860 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
Proposed Revision of
A928/A928M-09a
WK33861 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Proposed Revision of
A615/A615M-09b
WK33862 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
Proposed Revision of
A706/A706M-09b
WK33863 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
Proposed Revision of
A884/A884M-06
WK33864 Standard Terminology Relating to Quality and Statistics
Proposed Revision of
E456-08e3
WK33866 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
Proposed Revision of
A995/A995M-09
WK33879 Standard Test Method for Air-Entraining Admixtures for Concrete
Proposed Revision of
C233/C233M-10a
WK33880 Fire Prevention for Photovoltaic Panels, Modules, and Systems
WK33881 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
Proposed Revision of
E1680-95(2003)
WK33882 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
Proposed Revision of
A568/A568M-11a
WK33883 Standard Specification for Fuel Oils
Proposed Revision of
D396-10
WK33884 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
Proposed Revision of
D6987/D6987M-05a
WK33885 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
Proposed Revision of
D7422-10a
WK33886 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
Proposed Revision of
D6121-10
WK33887 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
Proposed Revision of
D7484-10a
WK33888 Standard Test Method for Cummins ISM Test
Proposed Revision of
D7468-10b
WK33889 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
Proposed Revision of
D5704-10
WK33890 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
Proposed Revision of
D7320-11
WK33891 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
Proposed Revision of
D7589-11
WK33892 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
Proposed Revision of
E1745-09
WK33893 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
Proposed Revision of
C1009-06
WK33896 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
Proposed Revision of
E1414/E1414M-11
WK33900 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
Proposed Revision of
F1924-05(2011)
WK33901 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
Proposed Revision of
F1948-05(2011)
WK33902 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
Proposed Revision of
F1973-08
WK33903 Standard Specification for Excess Flow Valves for Natural Gas Service
Proposed Revision of
F2138-09
WK33904 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Proposed Revision of
D3261-10a
WK33905 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
Proposed Revision of
F1055-11
WK33906 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
Proposed Revision of
D2683-10
WK33907 Standard Specification for Automated Vehicular Gate Construction
Proposed Revision of
F2200-11a
WK33908 Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction
Proposed Revision of
E329-11
WK33909 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
Proposed Revision of
E1643-10
WK33910 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
Proposed Revision of
E1745-09
WK33911 Standard Practice for Proximate Analysis of Coal and Coke
Proposed Revision of
D3172-07a
WK33912 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
Proposed Revision of
D4208-02(2007)
WK33913 Standard Classification of Coals by Rank
Proposed Revision of
D388-05
WK33915 Borehole Shear Test (BST) of Soils
WK33917 Standard Test Method for Radiographic Examination of Metallic Castings
Proposed Revision of
E1030-05(2011)
WK33927 Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide
Proposed Revision of
D4797-88(2007)
WK33930 Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
WK33931 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-08
WK33932 Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
Proposed Revision of
F895-84(2006)
WK33933 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
Proposed Revision of
D1461-85(2006)
WK33934 Mountain Search and Rescue Member Level I (Mtn SAR-LI)
WK33935 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
Proposed Revision of
C1260-07
WK33936 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
Proposed Revision of
C1260-07
WK33937 Force Attenuation Provided by Hip Protectors
WK33939 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
Proposed Revision of
D4966-10
WK33940 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11a
WK33941 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
Proposed Withdrawal of
E1301-95(2003)
Replacement with None
WK33942 Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation
Proposed Withdrawal of
E2028-99(2005)
Replacement with None
WK33946 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Proposed Revision of
D2726-10
WK33949 Standard Test Method for Aluminum in Water
Proposed Revision of
D857-07e1
WK33950 Standard Test Methods for Manganese in Water
Proposed Revision of
D858-07
WK33951 Standard Test Method for Hardness in Water
Proposed Revision of
D1126-02(2007)e1
WK33952 Standard Test Methods for Chromium in Water
Proposed Revision of
D1687-02(2007)e1
WK33953 Standard Test Methods for Zinc in Water
Proposed Revision of
D1691-02(2007)e1
WK33954 Standard Test Method for Total Mercury in Water
Proposed Revision of
D3223-02(2007)e1
WK33955 Standard Test Method for Molybdenum in Water
Proposed Revision of
D3372-02(2007)e1
WK33956 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Proposed Revision of
A194/A194M-10a
WK33957 Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction
Proposed Revision of
E329-11
WK33959 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11a
WK33960 Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
Proposed Withdrawal of
D4503-08
Replacement with None
WK33961 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
Proposed Revision of
D5055-11
WK33962 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-11
WK33963 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
Proposed Revision of
D6152-99(2005)
WK33964 Standard Test Method for Creep-Fatigue Crack Growth Testing
Proposed Revision of
E2760-10
WK33965 Standard Specification for Nonstructural Steel Framing Members
Proposed Revision of
C645-11
WK33966 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Proposed Revision of
C955-11
WK33967 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Proposed Revision of
A1003/A1003M-11
WK33968 Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing
Proposed Revision of
F1414-04
WK33969 Standard Specification for Leg Protection for Chain Saw Users
Proposed Revision of
F1897-08
WK33972 Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
Proposed Revision of
F1458-04(2008)
WK33973 Standard Specification for Foot Protection for Chain Saw Users
Proposed Revision of
F1818-04
WK33974 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
D5307-97(2007)
Replacement with D7169-05
WK33975 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
Proposed Revision of
E2013-06
WK33976 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
Proposed Revision of
E970-10
WK33977 Standard Specification for Gypsum Board
Proposed Revision of
C1396/C1396M-09a
WK33978 Standard Test Methods for Mechanical Testing of Steel Products—Metric
Proposed Revision of
A1058M-09
WK33979 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
Proposed Revision of
D6563-11a
WK33980 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
Proposed Revision of
D5917-09
WK33981 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11a
WK33982 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
Proposed Revision of
F2569-07
WK33983 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
Proposed Revision of
D5404/D5404M-11
WK33984 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
Proposed Revision of
A913/A913M-07
WK33985 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
Proposed Revision of
D7672-11
WK33986 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
Proposed Revision of
E1359-09
WK33987 Standard Specification for Stainless Steel Shielded Push On Type Couplings for Joining Hubless Cast Iron Soil Pipe and Fittings
WK33988 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D7217-05(2010)e1
WK33989 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D7421-08
WK33990 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
Proposed Revision of
D7594-10
WK33991 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
Proposed Revision of
F1977-04(2010)
WK33993 Determination of Fracture Toughness of Graphite at Ambient Temperature
WK33994 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
Proposed Revision of
E1212-09
WK33998 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
Proposed Revision of
A712-07
WK33999 Standard Test Method for Lamination Factor of Magnetic Materials
Proposed Revision of
A719/A719M-02(2007)
WK34000 Standard Test Method for Ductility of Nonoriented Electrical Steel
Proposed Revision of
A720/A720M-02(2007)
WK34001 Standard Test Method for Ductility of Oriented Electrical Steel
Proposed Revision of
A721/A721M-02(2007)
WK34002 Standard Specification for Agencies Performing Nondestructive Testing
Proposed Revision of
E543-09
WK34007 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
Proposed Revision of
F945-06
WK34008 Standard Specification for Welded Copper Tube
Proposed Revision of
B447-07
WK34009 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-11a
WK34010 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
Proposed Revision of
D3574-08
WK34011 Standard Specification for Wrought Stainless Steels for Surgical Instruments
Proposed Revision of
F899-11
WK34012 Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate
Proposed Revision of
D4374-06
WK34013 Standard Test Method for Neutralization of Virucidal Agents in Virucidal Efficacy Evaluations
Proposed Revision of
E1482-04
WK34014 Determining the Dry Fall (Fog) Properties of Protective Coatings
WK34015 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
Proposed Revision of
F620-06
WK34017 Standard Terminology Relating to Electrical Protective Equipment for Workers
Proposed Revision of
F819-10
WK34018 Determining Fiber Widths Using Image Analysis
WK34019 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
Proposed Revision of
C1741-11
WK34020 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
Proposed Revision of
C1741-11
WK34024 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
Proposed Revision of
A20/A20M-10
WK34026 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
Proposed Revision of
E262-08
WK34027 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
Proposed Revision of
E264-08
WK34028 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
Proposed Revision of
E526-08
WK34029 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
Proposed Revision of
E704-08
WK34030 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
Proposed Revision of
E705-08
WK34031 Standard Practice for Determining NeutronExposures for Nuclear Reactor Vessel Support Structures
Proposed Revision of
E1035-08
WK34032 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
Proposed Revision of
E1297-08
WK34033 for Snow and Ice Control for Walkway Surfaces
WK34034 Standard Practice for Descriptive Skinfeel Analysis of Creams and Lotions
Proposed Revision of
E1490-03
WK34037 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Proposed Revision of
A490-10ae1
WK34038 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
Proposed Revision of
A490M-10
WK34042 Standard Test Methods for Water Vapor Transmission of Materials
Proposed Revision of
E96/E96M-10
WK34044 Standard Test Method for Cetane Number of Diesel Fuel Oil
Proposed Revision of
D613-10a
WK34045 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
Proposed Revision of
C1017/C1017M-07
WK34047 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
Proposed Revision of
E1695-95(2006)e1
WK34048 Standard Test Method for Calibrating and Meausring CT Density
Proposed Revision of
E1935-97(2008)
WK34049 Special Requirements forZip Lines, Ropes Courses, and Challenge Courses
WK34061 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
Proposed Revision of
F2229-07
WK34062 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
Proposed Revision of
F2581-07
WK34063 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
Proposed Revision of
G42-96(2003)
WK34064 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
Proposed Revision of
G138-06
WK34065 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
Proposed Revision of
G130-06
WK34066 Standard Practice for Establishing Allowable Stresses for Round Timber Piles
Proposed Revision of
D2899-03
WK34067 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
Proposed Revision of
C311-11
WK34068 Determining Fracture Energy of Asphalt Mixtures Using Compact Tension Geometry
WK34069 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
Proposed Revision of
E1282-11
WK34077 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
Proposed Revision of
D4998-95(2003)e1
WK34078 Lightweight Aggregate for Internal Curing of Concrete
WK34079 Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
WK34080 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
Proposed Revision of
C780-10
WK34081 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-10b
WK34082 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
Proposed Revision of
E2573-07a
WK34083 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
Proposed Revision of
E2573-07a
WK34084 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
Proposed Revision of
E2573-07a
WK34085 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
Proposed Revision of
E2579-07
WK34086 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
Proposed Revision of
E2579-07
WK34087 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
Proposed Revision of
E2579-07
WK34088 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
Proposed Revision of
E2579-07
WK34089 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-10b
WK34091 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
Proposed Revision of
C67-11
WK34092 Standard Terminology for Additive Manufacturing Technologies
Proposed Revision of
F2792-10e1
WK34100 Standard Practice for Evaluating the Effects of Heat on Asphalts
Proposed Revision of
D3791/D3791M-04(2011)e1
WK34101 Standard Terminology Relating to Photovoltaic Solar Energy Conversion
E1328-05
Replacement with E772-05
WK34102 Standard Test method for measuring the Effect of Freeze-Thaw Cycling on a Thermoset Pultruded Composite
WK34103 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
Proposed Revision of
E1306-07
WK34107 Standard Specification for Cast Iron Soil Pipe and Fittings
Proposed Revision of
A74-09
WK34108 Standard Test Method for Measuring Softball Bat Performance Factor
Proposed Revision of
F1890-09
WK34109 Standard Test Method for Measuring Baseball Bat Performance Factor
Proposed Revision of
F1881-09
WK34111 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
Proposed Revision of
E646-07
WK34112 Ductility Testing of Metallic Foil
WK34113 Filter Debris Analysis (FDA) using both the Manual & Automated Processes
WK34114 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
Proposed Revision of
F2102-06e1
WK34115 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
Proposed Revision of
F648-10a
WK34120 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
Proposed Revision of
C882/C882M-05e1
WK34121 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
Proposed Revision of
C882/C882M-05e1
WK34127 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
Proposed Revision of
F384-06(2011)
WK34128 Standard Test Method for Determining Density of Structural Lightweight Concrete
Proposed Revision of
C567-05a
WK34129 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Proposed Revision of
A182/A182M-11
WK34130 Standard Specification for Aluminum Jacketing for Insulation
Proposed Revision of
C1729-10a
WK34131 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-11
WK34132 Standard Terminology of Building Seals and Sealants
Proposed Revision of
C717-11a
WK34133 Standard Specification for Industrial Floor Brick
Proposed Revision of
C410-10
WK34134 Standard Specification for Pedestrian and Light Traffic Paving Brick
Proposed Revision of
C902-10e1
WK34135 Standard Specification for Heavy Vehicular Paving Brick
Proposed Revision of
C1272-10
WK34136 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
Proposed Revision of
C67-11
WK34137 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
Proposed Revision of
C1088-11
WK34138 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
Proposed Revision of
A608/A608M-06
WK34139 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
Proposed Revision of
D6248-98(2004)
WK34140 Language Service Providers for Interpreting
WK34141 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
Proposed Revision of
D6926-10
WK34142 Standard Test Method for Rebound Number of Hardened Concrete
Proposed Revision of
C805/C805M-08
WK34143 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
Proposed Revision of
C1688/C1688M-10a
WK34144 Standard Specification for Solid Concrete Interlocking Paving Units
Proposed Revision of
C936/C936M-09
WK34147 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-10
WK34148 Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
Proposed Revision of
C1073-97a(2003)
WK34150 Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
Proposed Revision of
F1813-06
WK34151 Standard Terminology Relating to Concrete and Concrete Aggregates
Proposed Revision of
C125-11
WK34153 Interpreter working group for F2089
WK34155 Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
Proposed Revision of
B974/B974M-10
WK34156 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34157 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34158 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34159 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34160 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34161 Standard Test Method for Measurement of Masonry Flexural Bond Strength
Proposed Revision of
C1072-10
WK34163 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
Proposed Revision of
F2066-08
WK34164 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
Proposed Revision of
D1670-04
WK34168 Quantification and Characterization of Microbial Contamination in Liquid Fuels by Quantitative Polymerase Chain reaction (qPCR)
WK34170 Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
Proposed Revision of
E1834-09
WK34174 Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Withdrawn 2011)
D6041-97(2002)
WK34175 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
Proposed Revision of
E1462-00(2006)
WK34176 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
Proposed Revision of
E1021-06
WK34178 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
Proposed Revision of
C179-09
WK34179 Standard Guide for Language Interpretation Services
Proposed Revision of
F2089-01(2007)
WK34191 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
Proposed Revision of
D4871-06
WK34192 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
Proposed Revision of
D5763-95(2006)e1
WK34193 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
Proposed Revision of
D4057-06
WK34196 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
Proposed Withdrawal of
D7200-06
Replacement with None
WK34197 Standard Specification for Pyrolysis Liquid Biofuel
Proposed Revision of
D7544-10
WK34198 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK34200 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK34201
Proposed Revision of
WK34202 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
Proposed Revision of
D5337-04
WK34204 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
Proposed Revision of
B359/B359M-02(2006)
WK34205 Standard Specification for Seamless Copper Tube in Coils
Proposed Revision of
B743-06
WK34206 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
Proposed Revision of
B919-01(2006)
WK34207 Helicopter Land Operations Search and Rescue Technician
WK34208 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
Proposed Revision of
A1008/A1008M-11
WK34209 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-10
WK34210 Standard Consumer Safety Specification for Infant Swings
Proposed Revision of
F2088-11a
WK34212 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
Proposed Revision of
D1238-10
WK34214 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-11a
WK34215 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
Proposed Revision of
C139-10
WK34216 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-11
WK34217 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-11
WK34218 Standard Specification for Concrete Grid Paving Units
Proposed Revision of
C1319-01(2006)
WK34219 Standard Specification for Concrete Roof Pavers
Proposed Revision of
C1491-03(2009)
WK34220 Standard Specification for Manufactured Concrete Masonry Lintels
Proposed Revision of
C1623-06
WK34223 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
Proposed Revision of
D1093-04(2007)
WK34224 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
Proposed Revision of
D2982-07
WK34225 Standard Test Methods for Tension Testing of Metallic Materials
Proposed Revision of
E8/E8M-09
WK34227 Standard Guide for Measurement Systems Analysis (MSA)
Proposed Revision of
E2782-10
WK34228 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Proposed Revision of
A653/A653M-10
WK34229 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK34230 Standard Specification for Combination Oven Electric or Gas Fired
Proposed Revision of
F1495-05
WK34240 Standard Test Method for Gum Content in Fuels by Jet Evaporation
Proposed Revision of
D381-09
WK34241 Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials (Withdrawn 2011)
E103-84(2002)
WK34242 Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
Proposed Revision of
C1073-97a(2003)
WK34243 Standard Practice foReporting Opinions of Scientific or Technical Experts
Proposed Revision of
E620-11
WK34244 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
F2674-07
Replacement with F2329-05(2011)
WK34246 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Proposed Revision of
F477-10
WK34247 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
Proposed Revision of
D7672-11
WK34251 Standard Test Methods for Cellulosic Fiber Insulating Board
Proposed Revision of
C209-07ae1
WK34252 Standard Specification for Cellulosic Fiber Insulating Board
Proposed Revision of
C208-08a
WK34255 Standard Specification for Copper-Base Alloy Centrifugal Castings
Proposed Revision of
B271-08e1
WK34256 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
Proposed Revision of
D6831-05a
WK34257 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
Proposed Revision of
D6522-00(2005)
WK34258 Standard Test Method for Mar Resistance of Organic Coatings
Proposed Revision of
D5178-98(2008)
WK34259 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
Proposed Revision of
D2197-10
WK34260 Determination of Olefins in Gasoline by Raman Spectroscopy
WK34261 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
Proposed Revision of
D2556-93a(2005)
WK34262 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
Proposed Revision of
B811-02(2007)
WK34263 Standard Specification for Steel Forgings, General Requirements
Proposed Revision of
A788/A788M-10
WK34264 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
Proposed Revision of
D5776-07e1
WK34265 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-11
WK34266 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-11
WK34282 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
Proposed Revision of
E562-08
WK34283 Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
Proposed Revision of
F1805-06
WK34285 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK34286 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK34287 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK34288 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK34289 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-11
WK34308 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Proposed Revision of
A210/A210M-02(2007)
WK34309 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
Proposed Revision of
F667-06
WK34311 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11e1
WK34312 Standard Specification for Automated Vehicular Gate Construction
Proposed Revision of
F2200-11a
WK34314 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK34315 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK34316 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
Proposed Revision of
D5757-00(2006)
WK34321 Standard Consumer Safety Specification for Infant Bath Tubs
Proposed Revision of
F2670-10
WK34322 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
Proposed Revision of
D7039-07
WK34323 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
Proposed Revision of
A340-03a
WK34324 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
Proposed Revision of
G93-03(2011)
WK34325 Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
Proposed Revision of
E1336-96(2003)
WK34326 Integrity Testing of Concrete Deep Foundations by Thermal Profiling
WK34328 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
Proposed Revision of
F588-07
WK34329 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
Proposed Revision of
F842-04
WK34330 Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
Proposed Withdrawal of
D460-91(2005)
Replacement with None
WK34331 Standard Test Methods for Detergent Alkylate
Proposed Withdrawal of
D1569-05
Replacement with None
WK34332 Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
Proposed Withdrawal of
D5070-90(2005)
Replacement with None
WK34333 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
Proposed Withdrawal of
D800-05
Replacement with None
WK34334 Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
Proposed Withdrawal of
D1681-05
Replacement with None
WK34335 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
Proposed Withdrawal of
D6173-97(2005)
Replacement with None
WK34336 Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
Proposed Withdrawal of
D1568-05
Replacement with None
WK34337 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
Proposed Withdrawal of
D6174-01(2006)
Replacement with None
WK34343 Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular
Proposed Revision of
D6240-98(2006)
WK34349 THE APPLICATION OF CONTINUOUS PROCESSING IN THE PHARMACEUTICAL INDUSTRY
WK34352 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
Proposed Revision of
C1496-09
WK34353 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
Proposed Revision of
C1515-09
WK34354 Standard Specification for Paintball Markers
Proposed Revision of
F2272-11
WK34358 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
Proposed Revision of
E454-09
WK34359 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
Proposed Revision of
E454-09
WK34360 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
Proposed Revision of
E674-09
WK34361 Standard Specification for Perforated-Plate Sieves for Testing Purposes
Proposed Revision of
E323-09
WK34363 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
Proposed Revision of
D1121-07
WK34364 Standard Test Method for pH of Engine Coolants and Antirusts
Proposed Revision of
D1287-09
WK34365 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-11a
WK34366 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
Proposed Revision of
D4761-05
WK34368 MNL - 8; Manual on Maintenance Coatings for Nuclear Power Plants
WK34369 Standard Practice for Sampling of Geosynthetics for Testing
Proposed Revision of
D4354-99(2009)
WK34372 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
Proposed Revision of
F2855-11
WK34380 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
Proposed Revision of
B886-03(2008)
WK34386 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
Proposed Revision of
B887-03(2008)e1
WK34389 Standard Consumer Safety Performance Specification for Shopping Carts
Proposed Revision of
F2372-04
WK34390 portable x-ray systems used by bomb squads
WK34391 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
Proposed Revision of
D5457-10
WK34392 Standard Practice for Specifying Color by the Munsell System
Proposed Revision of
D1535-08e1
WK34393 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
Proposed Revision of
E466-07
WK34394 Standard Specification for PTFE Resin Skived Tape
Proposed Revision of
D3308-06
WK34395 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
Proposed Revision of
D6040-06
WK34396 Examination of Large Open Gear Teeth using Electromagnetic Methods
WK34397 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
Proposed Revision of
F442/F442M-09
WK34398 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
Proposed Revision of
F441/F441M-09
WK34399 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
Proposed Revision of
D5025-05
WK34402 Standard Test Method for Steady State and Dynamic Thermal Performance of Textile Materials
Proposed Revision of
D7024-04
WK34406 Standard Practice for Rotary Slag Testing of Refractory Materials
Proposed Revision of
C874-11
WK34407 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
Proposed Revision of
C181-09
WK34408 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
Proposed Revision of
C687-07
WK34417 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
Proposed Revision of
C684-99(2003)
WK34418 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
Proposed Revision of
E2680-09
WK34419 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
Proposed Revision of
C1550-10a
WK34420 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
Proposed Revision of
F1163-04a(2011)
WK34421 Safety Reins Used in Standardbred Racing.
WK34422 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
Proposed Revision of
D4745-11
WK34423 Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use
WK34424 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
Proposed Revision of
D7039-07
WK34425 Standard Guide for Labeling of UV-Protective Textiles
Proposed Revision of
D6603-11
WK34426 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
Proposed Revision of
D6544-11
WK34427 Nanotechnology Environment, Health, and Safety (EHS) Education and Training
WK34428 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
Proposed Revision of
D7042-11
WK34430 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
Proposed Revision of
D4449-08
WK34431 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
Proposed Revision of
B211-03
WK34432 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
Proposed Revision of
B211M-03
WK34433 Evaluating Emergency Response Robot Capabilities: Energy/Power: Endurance Tasks: Confined Area Terrains: Continuous Pitch/Roll Ramps
WK34434 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Space Voids with Complex Terrain
WK34435 Evaluating Emergency Response Robot Capabilities: Sensors: Audio: Speech Intelligibility (Two-Way)
WK34436 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) (Withdrawn 2010)
D6262-05
WK34437 Standard Specification for Cellular Polypropylene Thermal Insulation
Proposed Withdrawal of
C1631-08
Replacement with None
WK34440 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
Proposed Revision of
D7716-11
WK34441 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
Proposed Revision of
A890/A890M-10
WK34442 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
Proposed Revision of
C1609/C1609M-10
WK34444 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
Proposed Revision of
B633-07
WK34446 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
Proposed Revision of
B637-06(2011)
WK34447 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
Proposed Revision of
A372/A372M-10
WK34450
WK34451 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
Proposed Revision of
C1668-10
WK34454 Standard Method for Determining the Disintegration of Compostable Plastics and other Materials in Aerobic Industrial Composting Environments
WK34456 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Proposed Revision of
E691-09e1
WK34464 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-11
WK34466 Guide for Metallographic Identification of Microstructure in Cemented Carbides
Proposed Revision of
B657-05
WK34467 Standard Specification for Shoulder Prosthesis
Proposed Revision of
F1378-05(2010)
WK34468 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
Proposed Revision of
E381-01(2006)
WK34470 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
Proposed Withdrawal of
D5767-95(2004)
Replacement with None
WK34471 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
Proposed Revision of
E330-02(2010)
WK34473 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
Proposed Revision of
D1123-99(2009)
WK34474 Standard Specification for Concrete Pipe for Irrigation or Drainage
Proposed Withdrawal of
C118-05a
Replacement with None
WK34475 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
Proposed Revision of
E399-09e2
WK34476 Standard Specification for Arc and Flame Resistant Rainwear
Proposed Revision of
F1891-06
WK34477 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
Proposed Revision of
F2007-07a
WK34478 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-11
WK34479 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
Proposed Revision of
F1193-06
WK34480 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
Proposed Revision of
D3936-05
WK34482 Standard Practice for Job Productivity Measurement
Proposed Revision of
E2691-09
WK34483 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
Proposed Revision of
B488-01(2010)e1
WK34484 Terminology Relating to Measurements Taken on Thin, Reflecting Films
Proposed Revision of
E2444-05e1
WK34485 Standard Test Method for Float Test for Bituminous Materials
Proposed Revision of
D139-07
WK34486 Standard Practice for Paintball Field Operation
Proposed Revision of
F1777-11
WK34487 Standard Specification for Standard Sand
Proposed Revision of
C778-06
WK34488 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
Proposed Revision of
E136-11
WK34489 High Voltage Phasing Testers
WK34491 Standard Test Methods for Impact Testing of Cast Irons (Metric)
A327M-91(2006)
Replacement with A327-91(2006)
WK34494 Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing
Proposed Revision of
F2842-10
WK34495 A Performance-Based Instrumental Method for Monitoring Gaseous SO3/H2SO4 Concentrations in Effluent Streams from Fossil Fuel-Fired and Waste Combustion and Other Industrial Sources
WK34496 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
Proposed Revision of
F1602-07
WK34497 Standard Specification for Eye Protective Devices for Paintball Sports
Proposed Revision of
F1776-10
WK34498 Air Soft Player Safety Briefing
WK34499 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides
Proposed Revision of
E2111-05
WK34500 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
Proposed Revision of
C365/C365M-11
WK34501 Standard Test Method for Efficacy of Antimicrobial Agents Against Viruses in Suspension (Withdrawn 2011)
E1052-96(2002)
WK34502 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
Proposed Revision of
D2487-11
WK34503 Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides
WK34508 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
Proposed Revision of
D3638-07
WK34513 Standard Test Method for Epoxy Content of Epoxy Resins
Proposed Revision of
D1652-04
WK34514 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
Proposed Revision of
D3786/D3786M-09
WK34517 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Proposed Revision of
F468-10
WK34518 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
Proposed Revision of
C1609/C1609M-10
WK34519 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
Proposed Revision of
D1264-11
WK34522 Standard Specification for Automated Vehicular Gate Construction
Proposed Revision of
F2200-11a
WK34523 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
Proposed Revision of
C475/C475M-02(2007)
WK34524 Standard Practice for Transfilling and Safe Handling of Small Paintball Cylinders
Proposed Revision of
F2856-11
WK34525 Standard Specification for Alloy Steel Socket-Head Cap Screws
Proposed Revision of
A574-11
WK34527 Standard Guide for Classifying the Degrees of Ingression Protection Provided by a Membrane Switch
Proposed Revision of
F2865-11
WK34528 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
Proposed Withdrawal of
F2025-06
Replacement with None
WK34530 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-10
WK34531 Standard Test Method for Measurement of Collapse Potential of Soils
Proposed Withdrawal of
D5333-03
Replacement with None
WK34532 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
Proposed Revision of
D854-10
WK34533 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
Proposed Revision of
D698-07e1
WK34534 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
Proposed Revision of
D1557-09
WK34535 Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
WK34536 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
Proposed Revision of
C142/C142M-10
WK34537 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
Proposed Revision of
C78/C78M-10
WK34538 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Proposed Revision of
C293/C293M-10
WK34546 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres (Withdrawn 2005)
E903-96
WK34548 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
Proposed Revision of
D7663-11
WK34549 Intervertebral Body Fusion Devices with Integrated Fixation Components
WK34550 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres (Withdrawn 2005)
E903-96
WK34551 Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging
WK34552 Standard Specification for Isopropyl Alcohol
Proposed Revision of
D770-05
WK34553 Standard Specification for sec-Butyl Alcohol
Proposed Revision of
D1007-05
WK34554 Standard Specification for Isobutyl Alcohol
Proposed Revision of
D1719-05
WK34555 Standard Specification for 2-Ethoxyethanol
Proposed Revision of
D331-05
WK34556 Standard Specification for 1-Propanol (n-Propyl Alcohol)
Proposed Revision of
D3622-05
WK34557 Standard Specification for Ethyl Acetate (All Grades)
Proposed Revision of
D4614-05
WK34558 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
Proposed Revision of
D3829-02(2007)
WK34559 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
Proposed Revision of
D6821-02(2007)
WK34560 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
Proposed Revision of
D6896-03(2007)
WK34561 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
Proposed Revision of
D4684-08
WK34562 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
Proposed Revision of
B221M-07
WK34564 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
Proposed Revision of
B221M-07
WK34571 the Extraction and Analysis of Vegetable Oils from Fire Debris and Liquid Samples
WK34572 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
Proposed Revision of
D3203-05
WK34573 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
Proposed Revision of
F1948-05(2011)
WK34574 Standard Test Method for Determination of Trace Hydrogen Bromide, Hydrogen Chloride, Chlorine and Organic Halides in Hydrogen Fuel by Gas Chromatography (GC) withElectrolytic Conductivity Detector Cell (ELCDC) and Mass Spectrometer (MS)
WK34575 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
Proposed Revision of
F480-06be1
WK34577 Standard Consumer Safety Specification for Non-Powder Guns
Proposed Revision of
F589-06
WK34580 Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
WK34581 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
Proposed Revision of
D3638-07
WK34582 Standard Test Method for Ignition of Materials by Hot Wire Sources
Proposed Revision of
D3874-10
WK34583 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
Proposed Revision of
D4314-05
WK34584 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
Proposed Revision of
D4363-98(2010)
WK34586 Standard Test Method for Aggregate Durability Index
Proposed Revision of
D3744/D3744M-11
WK34587 Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
Proposed Revision of
F2839-11
WK34588 Operation of Low Impact Paintball Game Fields
WK34589 Standard Consumer Safety Specification for Bunk Beds
Proposed Revision of
F1427-07
WK34590 Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
WK34591 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
Proposed Revision of
E1527-05
WK34593 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Proposed Revision of
F1281-07
WK34594 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Proposed Revision of
F1281-07
WK34595 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Proposed Revision of
F1281-07
WK34596 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
Proposed Revision of
C932-06
WK34599 Standard Specification for Performance of Active API Service Category Engine Oils
Proposed Revision of
D4485-11a
WK34600 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
Proposed Revision of
D7619-10
WK34601 Penetration Testing of Needles Used in Surgical Sutures
WK34602 Standard Guide for Measuring Radial Loading of Balloon-Expandable and Self-Expandable Stents
WK34603 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
Proposed Revision of
F75-07
WK34604 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for
Proposed Revision of
D2992-06
WK34605 Standard Test Method for Chemical Resistance of
Proposed Revision of
D3681-06
WK34606 Standard Test Method for Long-Term Ring-Bending Strain of
Proposed Revision of
D5365-06
WK34607 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
Proposed Revision of
D2084-07
WK34609 Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
Proposed Revision of
D3853-08e1
WK34610 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
Proposed Revision of
F1732-96(2005)
WK34611 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
Proposed Revision of
F1803-06
WK34612 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
Proposed Revision of
E1877-00(2010)
WK34613 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
Proposed Revision of
D4678-04(2009)
WK34614 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
Proposed Revision of
E582-07
WK34615 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
Proposed Revision of
D1447-07e1
WK34622 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
Proposed Revision of
E2307-10
WK34623 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
WK34624 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
Proposed Revision of
D2414-09a
WK34627 Standard Specification for Unused Polypropylene Rope with Special Electrical Properties
Proposed Revision of
F1701-05
WK34630 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
Proposed Withdrawal of
D4281-95(2005)e1
Replacement with None
WK34633 Standard Specification for Resurfacing Patellar Prosthesis
Proposed Revision of
F1672-95(2011)
WK34634 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
Proposed Revision of
C177-10
WK34635 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
Proposed Revision of
C177-10
WK34636 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
Proposed Withdrawal of
F1335-04
Replacement with None
WK34637 for Abandoned/Inactive Mine Search and Rescue Technician Level I (Ab Mine SAR-LI)
WK34638 Standard Specification for n-Propyl Acetate (96 % Grade)
Proposed Revision of
D3130-03
WK34639 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
Proposed Revision of
C1140-03a
WK34640 Corrosion Protection Metals using Nanostructured Zinc-Nickel Alloys
WK34641 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
Proposed Revision of
E1025-05
WK34642 Standard Test Methods for Ethylcellulose
Proposed Revision of
D914-00(2006)
WK34647 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
Proposed Revision of
B124/B124M-11a
WK34648 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283/B283M-11a
WK34649 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
Proposed Revision of
B967/B967M-11
WK34650 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
Proposed Revision of
B249/B249M-11
WK34651 Low Leaded Brass Rod, Bar and Shapes
WK34652 Standard Specification for n-Butyl Alcohol (Butanol)
Proposed Revision of
D304-05
WK34653 Standard Specification for Methyl Ethyl Ketone
Proposed Revision of
D740-05
WK34654 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-11
WK34657 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
Proposed Revision of
D4674-02a(2010)
WK34658 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
Proposed Revision of
D5470-06(2011)
WK34660 Standard Terminology of Building Economics
Proposed Revision of
E833-09a
WK34661 Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing
Proposed Revision of
F655-06
WK34664 Vacuum Testing after Backfill
WK34667 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
Proposed Revision of
E2404-10
WK34668 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
Proposed Revision of
D4726-09
WK34670 Standard Specification for Wrought Stainless Steels for Surgical Instruments
Proposed Revision of
F899-11
WK34681 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
Proposed Revision of
D4313-03(2010)
WK34690 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
Proposed Revision of
A879/A879M-06
WK34691 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
Proposed Revision of
E2110-09e1
WK34692 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
Proposed Revision of
B345/B345M-11
WK34693 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
Proposed Revision of
E2657-09
WK34701 Evaluating the Flexural Properties of Fire-Resistant Structural Composite Panels Exposed to Elevated Temperatures1
WK34705 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
Proposed Revision of
D7736-11
WK34706 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
Proposed Revision of
E1886-05
WK34707 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Proposed Revision of
E1996-09
WK34708 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
Proposed Revision of
D5055-11
WK34709 Determining the Cleaning Efficacy of Floor Cleaning Steam Appliances
WK34710 Sustainable Dentistry
WK34711 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
Proposed Revision of
A980-97(2010)
WK34712 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
Proposed Revision of
F1407-11
WK34713 Preparation of Slab Samples for Use in Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
WK34718 Standard Specification for Silica Fume Used in Cementitious Mixtures
Proposed Revision of
C1240-11
WK34721 Standard Specification for Application of Portland Cement-Based Plaster
Proposed Revision of
C926-11
WK34722 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11b
WK34725 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-11
WK34726 Acrylic Molding Resins for Medical Applications
WK34727 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Proposed Revision of
C138/C138M-10b
WK34729 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Proposed Revision of
A1003/A1003M-11
WK34730 Standard Practice for Making and Curing Concrete Test Specimens in the Field
Proposed Revision of
C31/C31M-10
WK34731 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
Proposed Revision of
F2389-10
WK34732 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
Proposed Revision of
F2388-09
WK34733 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
Proposed Revision of
D7575-10e1
WK34734 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Proposed Revision of
C955-11a
WK34735 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
Proposed Revision of
C1222-09
WK34736
Proposed Revision of
WK34737 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
Proposed Revision of
D6669-01a(2007)e1
WK34738 Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable
Proposed Revision of
F1040-87(2007)
WK34739 Standard Specification for Rubber Insulating Blankets
Proposed Revision of
D1048-11
WK34740 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
Proposed Revision of
F2389-10
WK34741 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
Proposed Revision of
D7297-06
WK34742 Determination of Fungicides in Leather
WK34743 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
Proposed Revision of
D6245-07
WK34744 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Proposed Revision of
D92-05a(2010)
WK34745 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Proposed Revision of
D93-10a
WK34746 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
Proposed Revision of
E1012-05
WK34747 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
Proposed Revision of
E1918-06
WK34748 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
Proposed Revision of
C1577-10
WK34749 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11b
WK34750 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
Proposed Revision of
F667-06
WK34751 Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
WK34752 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
Proposed Revision of
D7339-07
WK34756 Standard Volume Correction Table for Road Tar
Proposed Revision of
D633-97(2005)
WK34759 The Relative Intensity Correction of Raman Spectrometers
WK34761 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)
Proposed Revision of
D5466-01(2007)
WK34762 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
Proposed Revision of
D6803-02(2007)
WK34763 Standard Practice for Firing Refractory Concrete Specimens
Proposed Revision of
C865-02(2007)
WK34764 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
Proposed Revision of
F667-06
WK34765 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
Proposed Revision of
D4952-09
WK34766 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
Proposed Revision of
D4629-10
WK34767 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
Proposed Revision of
D5762-11
WK34768 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
Proposed Revision of
D4177-95(2010)
WK34769 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
Proposed Revision of
D6670-01(2007)
WK34772 Sensory Evaluation of Oral care Products
WK34773 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
Proposed Revision of
C882/C882M-05e1
WK34774 Standard Test Method for 90 Degree Peel Resistance of Adhesives
Proposed Revision of
D6862-04
WK34776 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
Proposed Revision of
D7619-10
WK34777 Standard Test Method for Determining Filter Blocking Tendency
Proposed Revision of
D2068-10
WK34778 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Proposed Revision of
A182/A182M-11
WK34779 Standard Practice for Stitches and Seams
Proposed Revision of
D6193-11
WK34780 Plastic Materials that Degrade in Landfills
WK34781 Gel Tests for Polyurethane Non-Foam Formulations
WK34782 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-10
WK34783 Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
Proposed Revision of
C1073-97a(2003)
WK34784 Standard Test Method for Analyzing Stress in Glass
Proposed Revision of
F218-05
WK34786 Standard Specification for Application of Gypsum Sheathing
Proposed Revision of
C1280-09
WK34787 Standard Practice for Classification of Equipment Physical Location Information
Proposed Revision of
E2499-06
WK34789 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
Proposed Revision of
C727-01(2007)e1
WK34790 Standard Test Method for Windload Resistance of Rigid Plastic Siding
Proposed Revision of
D5206-06a
WK34791 Determination of Shot Coke in Green Petroleum Coke
WK34792 Standard Practice for Calculation of Equipment Movement Velocity (EMV)
Proposed Revision of
E2497-06
WK34794 Standard Practice for Radiological Emergency Response
Proposed Revision of
E2601-08
WK34796 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
Proposed Revision of
E2431-06
WK34797 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
Proposed Revision of
E2461-05
WK34798 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
Proposed Revision of
E998-05
WK34799 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
Proposed Revision of
E997-01(2009)
WK34800 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
Proposed Revision of
A416/A416M-10
WK34801 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
Proposed Revision of
A648-11
WK34802 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
Proposed Revision of
A779/A779M-10
WK34803 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
Proposed Revision of
C954-10
WK34804 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
Proposed Revision of
A910/A910M-10
WK34805 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
Proposed Revision of
A1035/A1035M-09
WK34806 Standard Classification for Machine-Made
Proposed Revision of
D2310-06
WK34807 Standard Test Method for External Pressure Resistance of
Proposed Revision of
D2924-01(2006)
WK34809 Resistance Thermometer Manual
WK34810 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Proposed Revision of
D882-10
WK34811 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
Proposed Revision of
D5191-10b
WK34813 High Demand Hip Simulator Wear Testing of Metal-on-Metal Articulations
WK34814 Collection and Evaluation of Metallic Corrosion Products from Environmental Tests
WK34831 Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel using Flow Analysis by Fourier Transform Infrared Spectroscopy - Rapid Screening Method
WK34832 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
Proposed Revision of
A376/A376M-06
WK34833 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-11
WK34834 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Proposed Revision of
A194/A194M-10a
WK34835 Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission
Proposed Revision of
E2478-06a
WK34836 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
Proposed Revision of
B418-09
WK34837 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
Proposed Revision of
B792-09
WK34838 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
Proposed Revision of
B793-10
WK34839 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
Proposed Revision of
B852-08
WK34840 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
Proposed Revision of
B960-08
WK34841 Standard Specification for Cadmium
Proposed Revision of
B440-11
WK34842 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
Proposed Revision of
F2509-06
WK34843 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
Proposed Revision of
D2008-09
WK34844 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
Proposed Revision of
D4819-96(2005)
WK34845 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
Proposed Revision of
A49-01(2006)
WK34846 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
Proposed Revision of
E971-88(2003)
WK34847 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
Proposed Revision of
E2266-11
WK34850 Standard Specification for Standard Sand
Proposed Revision of
C778-06
WK34851 Standard Test Method for Automated Heithaus Titrimetry
Proposed Revision of
D6703-07
WK34852 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08b
WK34853 Standard Test Method for Brinell Hardness of Metallic Materials
Proposed Revision of
E10-10
WK34855 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08b
WK34856 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
Proposed Revision of
C1481-11
WK34857 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
Proposed Revision of
B327-09a
WK34858 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
Proposed Revision of
B750-09
WK34859 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
Proposed Revision of
D2126-09
WK34860 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
Proposed Revision of
D4204-06
WK34861 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
Proposed Revision of
F2156-06
WK34862 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
Proposed Revision of
F735-06
WK34866 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
Proposed Revision of
D6335-09
WK34867 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
Proposed Revision of
D7097-09
WK34868 Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
Proposed Revision of
F2202-02(2007)
WK34869 New Standards and Subcommittee Ideas for E60
WK34870 Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids (Withdrawn 2011)
F862-93(2002)
WK34871 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
Proposed Revision of
B265-11
WK34872 Standard Specification for Titanium and Titanium Alloy Bars and Billets
Proposed Revision of
B348-11
WK34874 Epoxy-Coated Steel Dowels for Concrete Pavement
WK34875 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF)
Proposed Revision of
E900-02(2007)
WK34876 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
Proposed Revision of
A965/A965M-10
WK34877 Standard Guide for Petrographic Examination of Aggregates for Concrete
Proposed Revision of
C295/C295M-11
WK34878 Standard Test Methods for Compatibility of Screening Analysis of Waste
Proposed Revision of
D5058-90(2007)
WK34879 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
Proposed Revision of
E2820-11
WK34880 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
Proposed Revision of
F406-11b
WK34881 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
Proposed Revision of
D7621-10
WK34882 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
Proposed Revision of
F1470-09
WK34883 Standard Specification for Stainless Steel Wire
Proposed Revision of
A580/A580M-08
WK34884 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
Proposed Revision of
A358/A358M-08a
WK34885 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
Proposed Revision of
D7371-07
WK34886 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
Proposed Revision of
C1743-10
WK34887 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
Proposed Revision of
C1744-10
WK34888 Laminate Protective Jacket and Tape for Use over Thermal Insulation
WK34889 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
Proposed Revision of
F1383-11
WK34891 Standard Test Method for Automated Heithaus Titrimetry
Proposed Revision of
D6703-07
WK34892 Standard Test Method for No Flow Point of Petroleum Products
Proposed Revision of
D7346-07
WK34893 Measurement of Jet Cup Attrition Index of Fluid Catalytic Cracking Catalyst and Catalyst Additives
WK34894 Standard Specification for Concrete Aggregates
Proposed Revision of
C33/C33M-11a
WK34897 Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products
Proposed Withdrawal of
E1759-95(2003)
Replacement with None
WK34898 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
Proposed Revision of
D6352-04(2009)
WK34899 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Proposed Revision of
D3828-09
WK34900 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
Proposed Revision of
D7213-11
WK34901 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Proposed Revision of
D3828-09
WK34902 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography
Proposed Revision of
D7500-10
WK34903 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Proposed Revision of
D3828-09
WK34904 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Proposed Revision of
D3828-09
WK34906 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-08
WK34907 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-08
WK34910 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
Proposed Revision of
B150/B150M-08
WK34911 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
Proposed Revision of
B952/B952M-10
WK34912 Standard Specification for Zinc
Proposed Revision of
B6-09
WK34913 Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
Proposed Revision of
D281-95(2007)
WK34914 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
Proposed Revision of
D1483-95(2007)
WK34915 Standard Specification for Metal Lath
Proposed Revision of
C847-10a
WK34916 Standard Specification for Application of Interior Gypsum Plaster
Proposed Revision of
C842-05(2010)e1
WK34917 Standard Practice for Petrographic Examination of Hardened Concrete
Proposed Revision of
C856-11
WK34919 Standard Practice for Miscibility of Emulsified Asphalts
Proposed Revision of
D6999-04
WK34920 Water Slide Conveyors for rafts, tubes, and guests
WK34921 Standard Test Method for the Boiling Range Distribution of Petroleum Distillates With Final Boiling Points up to 535C by Ultra Fast Gas Chromatography (UFGC).1
WK34922 Acoustic Emission Noise
WK34925 Standard Test Method for Dryness of Propane (Valve Freeze Method)
Proposed Revision of
D2713-11
WK34927 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
Proposed Revision of
D6526-10
WK34930 Standard Test Method for Ammonia Colorimetric Leak Testing
Proposed Revision of
E1066-95(2006)
WK34933 Standard Specification for Filament-Wound
Proposed Revision of
D2996-01(2007)e1
WK34934 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
Proposed Revision of
D7566-11a
WK34935 Short Beam Fatigue Response of Polymer Matrix Composite Materials and Their Laminates
WK34936 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
Proposed Revision of
E2033-99(2006)
WK34937 Evaluation, Calibration, and Correlation of Continuous Friction Measurement Equipment (CFME)1
WK34941 Steel Fiber Reinforced Concrete Culvert, Storm Drain and Sewer Pipe
WK34942 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
Proposed Revision of
D665-06
WK34943 Chlorine in Coal and Coke by XRF
WK34944 Swell volume of psyllium.
WK34945 Standard Guide for Defining the Test Result of a Test Method
Proposed Revision of
E2282-09
WK34947 Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
Proposed Revision of
D2278-06
WK34948 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
Proposed Revision of
D3917-11
WK34949 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
Proposed Revision of
D4385-10
WK34950 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
Proposed Revision of
E1355-11
WK34951 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
Proposed Withdrawal of
D6789-02(2007)
Replacement with None
WK34952 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
Proposed Withdrawal of
D6819-02(2007)
Replacement with None
WK34953 Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus
Proposed Withdrawal of
D6833-02(2007)
Replacement with None
WK34954 Standard Consumer Safety Specification for Toddler Beds
Proposed Revision of
F1821-11a
WK34955 Standard Consumer Safety Specification for Infant Walkers
Proposed Revision of
F977-11a
WK34956 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
Proposed Revision of
A999/A999M-11
WK34957 Standard Terminology of Appearance
Proposed Revision of
E284-09a
WK34962 Limitations with the different Techniques for Electrical Detection of Potential Leaks Paths in Geomembranes
WK34964
Proposed Revision of
WK34965 Standard Specification for Data Format for Pavement Profile
Proposed Revision of
E2560-07
WK34966 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
Proposed Revision of
D7457-11e1
WK34967 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
Proposed Revision of
D7186-05
WK34968 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Proposed Revision of
C955-11a
WK34970 Optimize Scan Sequences for Clinical Diagnostic Evaluation of MoM Hip Arthroplasty Devices using MRI
WK34971 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
Proposed Revision of
D3679-11
WK34972 Standard Consumer Safety Performance Specification for Stationary Activity Centers
Proposed Revision of
F2012-08
WK34973 Standard Guide for Use of Joint Sealants
Proposed Revision of
C1193-11
WK34974 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
Proposed Revision of
B265-11
WK34978 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
Proposed Revision of
E2816-11
WK34979 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
Proposed Revision of
E2816-11
WK34980 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
Proposed Revision of
D7170-11
WK34981 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
Proposed Revision of
A530/A530M-04a(2010)
WK34982 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
Proposed Revision of
D7504-11
WK34983 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-11a
WK34984 Standard Consumer Safety Performance Specification for Shopping Carts
Proposed Revision of
F2372-04
WK34985 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
Proposed Revision of
D3700-07
WK34986 VISCOSITY OF GUAR GUM SOLUTIONS
WK34987 Thermal Conductivity of Liquids, Emulsions, Suspensions and Colloids by TCi Thermal Conductivity Analyzer
WK34988 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
Proposed Withdrawal of
D4864-90(2005)
Replacement with None
WK34990 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
Proposed Revision of
G187-05
WK34992 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
Proposed Revision of
D4741-06
WK34993 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
Proposed Revision of
D6278-07
WK34994 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
Proposed Revision of
D5950-02(2007)
WK34995 Interior Radiation Control Coatings (IRCC) for Building Applications
WK34996 Standard Test Method for Longitudinal Tensile Properties of
Proposed Revision of
D2105-01(2007)e1
WK34997 Standard Terminology Relating to Glass Fiber and Its Products
Proposed Revision of
D7018/D7018M-11
WK34998 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Proposed Revision of
C88-05
WK34999 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
Proposed Revision of
E2307-10
WK35000 Standard Specification for Centrifugally Cast
Proposed Revision of
D2997-01(2007)e1
WK35002 Standard Test Method for Crimp Frequency of manufactured Staple Fibers
Proposed Revision of
D3937-07
WK35032 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
Proposed Revision of
E1172-87(2003)
WK35033 Standard Specification For Commercial Coffee Maker, Electric, Automatic
WK35034 Standard Practice for Disposal of Personal Property
Proposed Revision of
E2306-11
WK35036 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
Proposed Revision of
D6413-11
WK35037 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-11a
WK35038 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
Proposed Revision of
D5917-09
WK35039 Post Remediation Verification of Fungal contamination in Buildings
WK35043 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
Proposed Revision of
C857-11
WK35045 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
Proposed Revision of
C1585-11
WK35051 150 to 1500 mm [6 to 60-inch] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
WK35052 Standard Specification for Medium-Hard-Drawn Copper Wire
Proposed Revision of
B2-08
WK35053 Permanent Linear Change of Refractory Castables
WK35054 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
Proposed Revision of
C1485-06
WK35060 Standard Test Method for Shear Fatigue of Sandwich Core Materials
Proposed Revision of
C394-00(2008)
WK35061 Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
Proposed Revision of
D3198-97(2007)
WK35062 Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
Proposed Revision of
D3470-97(2007)
WK35063 Standard Practice for the Evaluation of Machine Washable T-Shirts
Proposed Revision of
D6321-98(2004)
WK35064 Standard Test Method for Airport Pavement Condition Index Surveys
Proposed Revision of
D5340-11
WK35065 Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
Proposed Revision of
D3135-87(2005)
WK35066 Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics
Proposed Revision of
D7017-05
WK35067 Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear
Proposed Revision of
D7268-06
WK35068 Standard Practice for Dealing With Outlying Observations
Proposed Revision of
E178-08
WK35071 Standard Terminology Relating to Apparel
Proposed Revision of
D7022-04
WK35072 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007)
D2282-99(2005)
WK35073 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Proposed Revision of
D6648-08
WK35074 Standard Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired
Proposed Revision of
F1919-10
WK35075 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
Proposed Revision of
D7183-07e1
WK35076 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
Proposed Revision of
C739-11
WK35077 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
Proposed Revision of
F1160-05
WK35078 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
Proposed Revision of
D7716-11
WK35079 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
Proposed Revision of
D3676-07
WK35083 Standard Terminology Relating to Plastic Piping Systems
Proposed Revision of
F412-09
WK35084 Commercial Coffee Brewing Machines
WK35085 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
Proposed Revision of
A659/A659M-10
WK35086 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
Proposed Revision of
A794/A794M-09
WK35087 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
Proposed Revision of
A684/A684M-10a
WK35088 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
Proposed Revision of
A507-10
WK35089 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
Proposed Revision of
A1031/A1031M-10
WK35090 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
Proposed Revision of
A506-05
WK35091 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
Proposed Revision of
D7047-04
WK35092 Reinstatement of D779 Water Resistence of Paper, Paperboard and Other Sheet Materials by the Dry Indicator Method
WK35093 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
Proposed Revision of
D3321-94(2007)
WK35094 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
Proposed Revision of
F1951-09b
WK35095 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
Proposed Revision of
F1951-09b
WK35096 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
Proposed Revision of
F1951-09b
WK35097 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
Proposed Revision of
E1423-06
WK35098 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK35099 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK35100 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK35101 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Proposed Revision of
C1126-11e1
WK35102 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
Proposed Revision of
F2861-10
WK35103 Standard Test Method for pH of Engine Coolants and Antirusts
Proposed Revision of
D1287-09
WK35104 Measuring the Solar Heat Gain Coefficient of Fenestration Systems Using Calorimetry Hot Box Methods
WK35105 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
Proposed Revision of
C1303/C1303M-11a
WK35106 Standard Classification System for Rubber Products in Automotive Applications
Proposed Revision of
D2000-08
WK35107 Standard Specification for Stainless Steel Wire
Proposed Revision of
A580/A580M-08
WK35108 Standard Specification for Design and Performance of an Airborne Sense-and-Avoid System
Proposed Revision of
F2411-07
WK35109 Standard Consumer Safety Specification for Portable Bed Rails
Proposed Revision of
F2085-10a
WK35110 Standard Terminology of Adhesives
Proposed Revision of
D907-11
WK35111 Standard Terminology of Adhesives
Proposed Revision of
D907-11
WK35114 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
Proposed Revision of
B500/B500M-10
WK35115 Firestop Inspector Credentials
WK35116 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
Proposed Revision of
D1635-00(2006)
WK35117 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
Proposed Revision of
C1513-10
WK35118 Standard Test Method for Crimp Frequency of manufactured Staple Fibers
Proposed Revision of
D3937-07
WK35119 Standard Specification for Cellular Glass Thermal Insulation
Proposed Revision of
C552-07
WK35120 Standard Specification for Seamless Copper Water Tube (Metric)
Proposed Revision of
B88M-05(2011)
WK35121 Standard Specification for Copper Drainage Tube (DWV)
Proposed Revision of
B306-09
WK35122 Standard Specification for Seamless Copper Tube (Metric)
Proposed Withdrawal of
B75M-99(2011)
Replacement with None
WK35123 Standard Terminology of Powder Metallurgy
Proposed Revision of
B243-10
WK35124 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
Proposed Revision of
C652-11
WK35125 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
Proposed Revision of
C126-11
WK35126 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
Proposed Revision of
E1629-07
WK35127 Standard Guide for Sampling Waste Piles
Proposed Revision of
D6009-96(2006)
WK35128 Standard Test Methods for End-Joints in Structural Wood Products
Proposed Revision of
D7469-10
WK35131 Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
Proposed Revision of
F1603-07
WK35132 Standard Specification for Copper Alloys in Ingot Form
Proposed Revision of
B30-11
WK35133 Determination of Antibacterial Activity on Ceramic Surfaces
WK35134 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
Proposed Revision of
D7704-11
WK35135 Standard Specification for Copper Alloy Continuous Castings
Proposed Revision of
B505/B505M-10
WK35136 Standard Specification for Copper Alloy Sand Castings for Valve Applications
Proposed Revision of
B763-08a
WK35137 Standard Specification for Copper Alloy Sand Castings for General Applications
Proposed Revision of
B584-11
WK35140 Standard Test Method for Hydrazine in Water
Proposed Revision of
D1385-07
WK35141 Standard Test Method for On-line Determination of Sodium in Water
Proposed Revision of
D2791-07
WK35142 In-Plane Shear Properties of Sandwich Panels Using Picture Frame Fixture
WK35147 Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
Proposed Revision of
F1872-05
WK35148 Standard Guide for Visually Estimating Oil Spill Thickness on Water
Proposed Revision of
F2534-06
WK35149 Standard Safety Specification for Chests, Door Chests, and Dressers
Proposed Revision of
F2057-09b
WK35151 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
Proposed Revision of
D3625-96(2005)
WK35152 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
Proposed Revision of
E2261-07
WK35153 the Determination of Bactericidal Efficacy on the Surface of Medical Gloves
WK35154 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
Proposed Withdrawal of
E1991-05
Replacement with None
WK35155 Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
Proposed Revision of
F1862-07
WK35156 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
Proposed Revision of
D7015-07
WK35160 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
Proposed Revision of
D1335-11
WK35161 Greener Site Assessment and Cleanup (GSAC)
WK35163 Road Tunnel (Underground) Standard
WK35164 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
Proposed Revision of
E2149-10
WK35165 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
Proposed Revision of
C1012/C1012M-10
WK35166 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
Proposed Revision of
C1313/C1313M-10
WK35186 High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
WK35187 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
Proposed Revision of
E1185-07e1
WK35188 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
Proposed Revision of
E1121-07e1
WK35189 Through-Hardened Steel Washers for Pressure Boundary Flanges
WK35190 Standard Specification for Polypropylene Injection and Extrusion Materials
Proposed Revision of
D4101-11
WK35191 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK35192 Snow Acceleration Test for Truck-Bus Tires
WK35193 Standard Test Method for Gross Calorific Value of Coal and Coke
Proposed Revision of
D5865-10ae1
WK35194 Standard Guide for Use of Joint Sealants
Proposed Revision of
C1193-11a
WK35196 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
Proposed Revision of
D4669-07
WK35197 Standard Test Method for Polyurethane Raw Materials Determination of Suspended Matter In Polyols
Proposed Revision of
D4670-07
WK35198 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
Proposed Revision of
D4878-08
WK35199 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
Proposed Revision of
D6342-08
WK35200 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
Proposed Revision of
C1044-07
WK35201 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
Proposed Revision of
G74-08
WK35202 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
Proposed Revision of
B962-08
WK35203 Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
Proposed Revision of
F1159-03a
WK35204 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
Proposed Revision of
A717/A717M-06
WK35205 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
Proposed Revision of
E999-10
WK35206 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
Proposed Revision of
E965-96(2006)
WK35207 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
Proposed Revision of
F2617-08e1
WK35208 Stress-Strain and Creep Testing for Overhead Electrical Conductors
WK35210 High Temperature Characterization of Gypsum Boards and Panels
WK35211 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
Proposed Revision of
F2894-11
WK35212 Highway Transportation Elements and Related Sitework UNIFORMAT II
WK35213 Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Gravel
WK35214 Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Sand
WK35215 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
Proposed Withdrawal of
C1302-04(2011)
Replacement with None
WK35217 STANDARD TEST METHOD FOR HYDRAULIC PULLOUT RESISTANCE OF A GEOMEMBRANE WITH LOCKING EXTENSIONS EMBEDDED IN CONCRETE
WK35219 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
Proposed Revision of
E1613-04
WK35221 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
Proposed Revision of
E1795-04
WK35222 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
Proposed Revision of
E1797-04
WK35223 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
Proposed Revision of
E1979-04
WK35224 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
Proposed Revision of
E2252-04
WK35225 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
Proposed Revision of
E2255-04
WK35227 the Hotplate Digestion of Lead from Composited Wipe Samples
WK35228 the Ultrasonic Extraction of Lead from Composited Wipe Samples
WK35229 Indication of Early-age Mechanical Properties by Thermal Measurements
WK35230
WK35231 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
Proposed Revision of
C174/C174M-06
WK35232 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
Proposed Revision of
E1502-10
WK35234 Standard Terminology for Language Testing
WK35235 Standard Specification for Flexible Cellular Rubber Chemically Blown
Proposed Revision of
D6576-07
WK35236 Standard Practice for Heat Treatment of Magnesium Alloys
Proposed Revision of
B661-06
WK35237 Standard Practice for Determining the Flood Damage Resistance Rating of Materials and Assemblies
WK35238 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
Proposed Revision of
F2565-06
WK35241 Standard Guide for Construction and Maintenance of Warning Track Areas on Sports Fields
Proposed Revision of
F2270-04
WK35242 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
Proposed Revision of
D1056-07
WK35243 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
Proposed Revision of
D5837-99(2005)
WK35244 Determination of Water Content of Liquefied Petroleum Gases (LPG) Using Electronic Moisture Analyzers
WK35245 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
Proposed Revision of
D2421-02(2007)
WK35247 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
Proposed Revision of
D6778-06
WK35248 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B534-07
WK35249 Fabric Weave Identification and Performance Selection
WK35250 Standard Practice for Fiber Reinforced Concrete for Making and Curing Test Specimens in the Laboratory and Field
WK35251 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
Proposed Revision of
D3174-11
WK35252 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
Proposed Revision of
E255-07
WK35253 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
Proposed Revision of
F1499-01(2008)
WK35254 Standard Test Method for Acceptance by Performance Testing for Sieves
Proposed Revision of
E2427-11
WK35256 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
Proposed Revision of
F1717-11a
WK35259 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
Proposed Revision of
D3180-07
WK35260 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-11
WK35261 Laboratory Measurement of Acoustical Effectiveness for Naval and Marine Ship Bulkhead Treatments
WK35262 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities
Proposed Revision of
F1450-05
WK35263 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
Proposed Revision of
D1921-06e1
WK35264 Standard Test Method for Index of Refraction of Transparent Organic Plastics
Proposed Revision of
D542-00(2006)
WK35265 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
Proposed Revision of
D2457-08e1
WK35266 Permeation of Liquids and Gases through Protective Clothing Materials utilizing a Multi-Cell Test Fixture
WK35267 Standard Guide for Installation of Geosynthetic Clay Liners
Proposed Revision of
D6102-06
WK35268 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
Proposed Revision of
D6766-09
WK35269 Standard Specification for General Requirements for Wrought Copper Alloy Wire
Proposed Revision of
B250/B250M-07
WK35270 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
Proposed Revision of
B140/B140M-07
WK35271 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
Proposed Revision of
D2863-10
WK35272 Standard Specification for Mineral Fiber Pipe Insulation
Proposed Revision of
C547-11
WK35273 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
F2785-10a
WK35274 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
Proposed Revision of
F2767-09
WK35275 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
Proposed Revision of
F2145-09
WK35276 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
Proposed Revision of
F1973-08
WK35277 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
Proposed Revision of
F1733-07
WK35278 Standard Test Method on Evaluating Whole Glove Dexterity Tool Test
WK35279 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
Proposed Revision of
F2136-08
WK35280 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-11
WK35281 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
Proposed Revision of
F606M-11
WK35282 Quality Control Protocols Related to Natural Turf Athletic Field Rootzone Constructions
WK35283 Standard Test Methods for Friction Tapes
Proposed Revision of
D69-06
WK35284 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
Proposed Revision of
D3895-07
WK35285 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
Proposed Revision of
D7132-05
WK35286 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
Proposed Revision of
E248-07
WK35287 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
Proposed Revision of
E382-07
WK35288 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry
Proposed Revision of
E945-07
WK35289 Systems to Measure Sound Levels in Buildings
WK35291 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
Proposed Revision of
F1854-09
WK35292 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
Proposed Revision of
F1800-07
WK35293 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11a
WK35298 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
Proposed Revision of
D648-07
WK35300 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
Proposed Revision of
F2306/F2306M-11
WK35301 NCLS and Strain Determination in Thermoplastic Pipe Utilizing the Ring Compression Test
WK35302 Standard Specification for Aluminum-Alloy Sand Castings
Proposed Revision of
B26/B26M-09
WK35303 Standard Specification for Aluminum-Alloy Permanent Mold Castings
Proposed Revision of
B108/B108M-08
WK35304 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
Proposed Revision of
B917/B917M-11
WK35310 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
Proposed Revision of
D7582-10
WK35311 Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
Proposed Revision of
D5127-07
WK35312 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
Proposed Revision of
D2777-08e1
WK35313 Standard Test Method for Knoop and Vickers Hardness of Materials
Proposed Revision of
E384-11
WK35314 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
Proposed Revision of
D5168-09
WK35315 Calculating and reporting biobased content of complex products
WK35316 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
Proposed Revision of
F2146-07
WK35317 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
Proposed Revision of
B124/B124M-11b
WK35318 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283/B283M-11a
WK35319 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
Proposed Revision of
B967/B967M-11a
WK35320 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
Proposed Revision of
B249/B249M-11
WK35321 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
Proposed Revision of
A962/A962M-11
WK35322 Standard Specifications for Personal Climbing Equipment
Proposed Revision of
F887-11
WK35324 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
Proposed Revision of
A29/A29M-11a
WK35329 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
Proposed Revision of
F2620-09e1
WK35332 Standard Terminology Relating to Plastic Piping Systems
Proposed Revision of
F412-09
WK35333 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
Proposed Revision of
A574M-11
WK35334 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
Proposed Revision of
B124/B124M-11b
WK35335 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283/B283M-11a
WK35336 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
Proposed Revision of
B967/B967M-11a
WK35337 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Proposed Revision of
E1601-10
WK35338 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Proposed Revision of
A403/A403M-11
WK35339 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-11
WK35340 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
Proposed Revision of
D792-08
WK35341 tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
Proposed Revision of
A663/A663M-89(2006)
WK35342 Home Composting of Biodegradable Plastics
WK35343 Standard Specification for Carbons and Alloy Steel Nuts
Proposed Revision of
A563-07a
WK35344 Standard Specification for Stainless Steel Socket Head Cap Screws
Proposed Revision of
F837-08
WK35345 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
Proposed Revision of
F879-10
WK35346 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Proposed Revision of
F468-10
WK35347 analysis of piperylene, isoprene and other compounds in crude C5 hydrocarbon mixture by gas chromatography and flame ionization detector.
WK35348 Standard Specification for Stainless Steel Socket-Set Screws
Proposed Revision of
F880-02(2008)
WK35349 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
Proposed Revision of
C1104/C1104M-00(2006)
WK35350 Standard Test Method forn-Heptane Insolubles
Proposed Revision of
D3279-07
WK35351 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
Proposed Revision of
D1561-92(2005)e1
WK35352 Standard Specification for Friction Tape
Proposed Revision of
D4514-06
WK35353 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
Proposed Revision of
D902-06
WK35354 Standard Specification for Rubber Floor Tile
Proposed Revision of
F1344-10
WK35355 Standard Specification for Rubber Sheet Floor Covering Without Backing
Proposed Revision of
F1859-10
WK35356 Standard Specification for Rubber Sheet Floor Covering With Backing
Proposed Revision of
F1860-10
WK35357 Standard Specification for Resilient Stair Treads
Proposed Revision of
F2169-02(2008)
WK35358 Standard Test Methods for Mechanical Testing of Steel Products—Metric
Proposed Revision of
A1058M-09
WK35360 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
Proposed Revision of
F891-10
WK35361 Standard Specification for Aluminum-Alloy Sand Castings
Proposed Revision of
B26/B26M-09
WK35362 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
Proposed Revision of
F1760-01(2011)
WK35363 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
Proposed Revision of
F758-95(2007)e1
WK35364 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
Proposed Revision of
D2680-01(2009)
WK35365 Standard Terminology Relating to Metallic Coated Steel Products
Proposed Revision of
A902-09
WK35366 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-11ae1
WK35367 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-11ae1
WK35368 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-11ae1
WK35369 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)
Proposed Revision of
D7713-11
WK35370 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
Proposed Revision of
E399-09e2
WK35371 Screening Aviation Turbine Fuels for Selected Quality Properties using Mid-IR and Near-IR Multivariate Quantitative Analysis
WK35372 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Proposed Revision of
A53/A53M-10
WK35373 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
Proposed Revision of
D3237-06e1
WK35374 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
Proposed Revision of
D3831-01(2006)
WK35375 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
Proposed Revision of
D5184-01(2006)
WK35376 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
Proposed Revision of
A703/A703M-11
WK35377
Proposed Revision of
WK35378 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A957/A957M-11
WK35379 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
Proposed Revision of
D7303-06
WK35380 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
Proposed Revision of
A985/A985M-11
WK35381 Standard Test Method for Efficacy of Microbicides Used in Cooling Water Systems
Proposed Revision of
E645-07
WK35382 Standard Test Method for Efficacy of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
Proposed Revision of
E723-07
WK35383 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime
Proposed Revision of
E1839-07
WK35384 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Proposed Revision of
A941-10a
WK35385 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases
Proposed Revision of
D7572-11a
WK35386 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
Proposed Revision of
F606-11
WK35387 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
Proposed Revision of
F606M-11
WK35388 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
Proposed Revision of
E805-06
WK35389 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
Proposed Revision of
A962/A962M-11
WK35390 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
Proposed Revision of
C1620-05
WK35392 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
Proposed Revision of
F1995-00(2005)
WK35394 Standard Specification for Metal Injection Molded Commercially Pure Titanium Components for Surgical Implant Applications
WK35396 Standard Guide for Measuring the Presence of Planar Organic Compounds Which Induce CYP1A, Using Reporter Gene Test Systems
Proposed Withdrawal of
E1853M-04
Replacement with None
WK35397 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
Proposed Revision of
E1197-87(2004)
WK35399 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
Proposed Revision of
A742/A742M-03(2008)
WK35400 Amusement Railway Ride Tracks, Devices and Facilities
WK35401 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-11
WK35402 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
Proposed Revision of
A962/A962M-11
WK35403 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
Proposed Revision of
A453/A453M-10e1
WK35404 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
Proposed Revision of
A437/A437M-10a
WK35405 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
Proposed Revision of
E1197-87(2004)
WK35407 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Proposed Revision of
A615/A615M-09b
WK35410 The Analysis of Smokeless Powder by Gas Chromatography-Mass Spectromety and Fourier-transform Infrared Spectroscopy
WK35411 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
Proposed Revision of
A609/A609M-91(2007)
WK35412 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
Proposed Revision of
D1248-05
WK35413 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
Proposed Revision of
D1693-08
WK35414 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Proposed Revision of
D3350-10a
WK35415 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
Proposed Revision of
D4976-06
WK35416 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
Proposed Revision of
D2561-95(2005)
WK35417 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
Proposed Revision of
D3419-00(2006)
WK35418 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
Proposed Revision of
D5224-00(2006)
WK35419 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
Proposed Revision of
D6779-11
WK35422 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
Proposed Revision of
A531/A531M-91(2006)
WK35425 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
Proposed Revision of
D6992-03(2009)
WK35427 Standard Practice for Magnetic Particle Testing
Proposed Revision of
E1444/E1444M-11
WK35429 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
Proposed Revision of
A955/A955M-11e1
WK35433
WK35448 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
Proposed Revision of
E2593-11e1
WK35450 Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
Proposed Revision of
D4672-00(2006)e1
WK35451 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Proposed Revision of
D5821-01(2006)
WK35453 Standard Practice for Classifying Emulsified Recycling Agents
Proposed Revision of
D5505-06
WK35454 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
Proposed Revision of
C1252-06
WK35455 Standard Guide for Evaluating Stain Removal Performance in Home Laundering
Proposed Revision of
D4265-98(2007)e1
WK35456 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
Proposed Revision of
D3418-08
WK35457 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
Proposed Revision of
D5203-07
WK35458 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Proposed Revision of
F468-10
WK35459 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
Proposed Revision of
D5111-99(2006)
WK35460 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
Proposed Revision of
D6328-06
WK35463 Thin-Gauge Fully Processed Non-oriented Electrical Steel
WK35464 Roadmap for E55
WK35465 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11b
WK35466 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-11b
WK35467 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
Proposed Revision of
F2686-10
WK35468 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
D1248-05
WK35469 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
D2513-11b
WK35474 Standard Specification for Rubber Contraceptives (Male Condoms)
Proposed Revision of
D3492-08
WK35475 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectroscopy
Proposed Revision of
E841-04
WK35476 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
Proposed Revision of
D6608-00(2006)
WK35477 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
Proposed Revision of
E2239-04
WK35479 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
Proposed Revision of
D7418-07
WK35480 Condition Monitoring of Soot in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
WK35481 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
Proposed Revision of
E878-01(2005)
WK35482 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
Proposed Revision of
F2479-10
WK35485 Standard Test Methods for Crosshole Seismic Testing
Proposed Revision of
D4428/D4428M-07
WK35488 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
Proposed Revision of
A6/A6M-11
WK35489 Standard Specification for Carbon Structural Steel
Proposed Revision of
A36/A36M-08
WK35490 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
Proposed Revision of
A283/A283M-03(2007)
WK35491 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
Proposed Revision of
A572/A572M-07
WK35492 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
Proposed Revision of
A939-07
WK35493 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
Proposed Revision of
D5469-00(2005)
WK35494 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
Proposed Revision of
C1029-10
WK35496 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration
Proposed Revision of
D7375-08
WK35497 Standard Specification for Mortar for Unit Masonry
Proposed Revision of
C270-10
WK35498 Standard Terminology Relating to Safety and Traction for Footwear
Proposed Revision of
F1646-05e1
WK35499 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
Proposed Revision of
D4402-06
WK35501 Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
Proposed Revision of
F498-77(2006)
WK35502 Standard Test Method for Torsion Characteristic of Alpine Skis
Proposed Revision of
F779-93(2006)
WK35503 Evaluation of Convective Heat Transfer Coefficients of Liquids
WK35505 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
Proposed Revision of
A508/A508M-05b(2010)
WK35506 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Proposed Revision of
A1003/A1003M-11e1
WK35509 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-10
WK35510 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-10
WK35511 Consumer Safety Specification for Baby Monitors
WK35512 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-10
WK35513 Copper Electrode Wire used for Welding the Seams of Steel Cans
WK35514 Standard Test Methods for Rubber Thread
Proposed Withdrawal of
D2433-07
Replacement with None
WK35515 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
Proposed Withdrawal of
D3771-03(2007)
Replacement with None
WK35516 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
Proposed Withdrawal of
D3903-03(2007)
Replacement with None
WK35518 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-11
WK35519 evaluation of retroreflective composite optics for traffic markings
WK35520 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
Proposed Revision of
D7373-07e1
WK35521 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
Proposed Revision of
C127-07
WK35522 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
Proposed Revision of
C128-07a
WK35523 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35524 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35525 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35526 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35527 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35528 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35529 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35530 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
Proposed Revision of
E1352-08a
WK35531 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
Proposed Revision of
E1353-08ae1
WK35532 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-11
WK35533 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-11
WK35534 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-11
WK35535 Stainless Steel Jacketing for Insulation
WK35536 Initial pH of Engine Oils
WK35537 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
Proposed Revision of
D7474-08
WK35538 Mountain Search and Rescue Operator (Mtn SAR-LII)
WK35539 Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers
Proposed Revision of
F2050-09
WK35540 Standard Consumer Safety Specification for Infant Swings
Proposed Revision of
F2088-11b
WK35541 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
Proposed Revision of
C642-06
WK35542 Standard Specification for Precast Concrete Septic Tanks
Proposed Revision of
C1227-10a
WK35543 Standard Test Method for Toughness and Tenacity of Bituminous Materials
Proposed Revision of
D5801-95(2006)e1
WK35544 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
Proposed Revision of
C890-06(2011)
WK35545 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
Proposed Revision of
C890-06(2011)
WK35549 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
Proposed Revision of
D6602-03b(2010)e1
WK35552 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
Proposed Revision of
C890-06(2011)
WK35559 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
Proposed Revision of
D7304-06
WK35560 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
Proposed Revision of
F2479-10
WK35561 Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable
Proposed Withdrawal of
F1040-87(2007)
Replacement with None
WK35562 Research Report in Support of Revision to WK29409 modification to Automatic Counting of Oils using Direct Imaging
WK35563 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
Proposed Revision of
C1708-11
WK35564 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
Proposed Revision of
D2863-10
WK35581 Analysis of Clandestine Drug Laboratory Evidence
WK35582 pH and Resistivity Testing for Coarse Lightweight Aggregate
WK35583 Standard Test Method for Determining Density of Structural Lightweight Concrete
Proposed Revision of
C567-05a
WK35585 Data Collection and Resolving Test Result Differences Between Buyer and Seller.
WK35586 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
Proposed Revision of
E2177-11
WK35587 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
Proposed Revision of
C928/C928M-09
WK35588 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
Proposed Revision of
C928/C928M-09
WK35589 Standard Specification for Aluminum Jacketing for Insulation
Proposed Revision of
C1729-10a
WK35590 Standard Specification for Aluminum Jacketing for Insulation
Proposed Revision of
C1729-10a
WK35591 Standard Specification for Aluminum Jacketing for Insulation
Proposed Revision of
C1729-10a
WK35592 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
Proposed Revision of
C1410-10
WK35593 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
Proposed Revision of
C50-00(2006)
WK35596 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
Proposed Revision of
E1710-11
WK35597 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-10
WK35598 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
Proposed Revision of
C890-06(2011)
WK35599 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
Proposed Revision of
D1785-06
WK35600 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
Proposed Revision of
C833-01(2008)
WK35601 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
Proposed Revision of
A703/A703M-11
WK35602 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
Proposed Revision of
D2564-04(2009)e1
WK35603 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Proposed Revision of
C618-08a
WK35604 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
Proposed Revision of
F1917-08
WK35605 Standard Test Method for Air Content of Hydraulic Cement Mortar
Proposed Revision of
C185-08
WK35606 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
Proposed Revision of
F1917-08
WK35607 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-11
WK35608 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
Proposed Revision of
D6539-00(2006)e2
WK35609 Test Method for Consistency of Grouts
WK35610 Kinetic Parameters by Differential Scanning Calorimetry Using the Kissinger Method
WK35611 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
Proposed Revision of
D7012-10
WK35612 Standard Specification for Castings, Nickel and Nickel Alloy
Proposed Revision of
A494/A494M-09e1
WK35613 Measurement of Retroreflective Signs Using a Mobile Retroreflectometer
WK35614 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
Proposed Revision of
C1741-11
WK35615 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
Proposed Revision of
A6/A6M-11
WK35616 Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations
Proposed Revision of
E1174-06
WK35617 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Proposed Revision of
D93-11
WK35618 Standard Specification for Performance of Active API Service Category Engine Oils
Proposed Revision of
D4485-11b
WK35619
Proposed Revision of
WK35620 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
Proposed Revision of
C719-93(2010)
WK35621 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
Proposed Revision of
D2106-07e1
WK35622 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
Proposed Revision of
D2106-07e1
WK35627 Standard Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications
Proposed Revision of
E235-06
WK35645 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
Proposed Revision of
D3182-07
WK35649 Standard Terminology Relating to Wear and Erosion
Proposed Revision of
G40-10b
WK35650 Standard Specification for Uranium Ore Concentrate
Proposed Revision of
C967-08
WK35651 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
Proposed Revision of
D7704-11
WK35652 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans (Withdrawn 2004)
D5833-95e1
WK35653 Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)
D5834-95
WK35654 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
Proposed Revision of
A1053/A1053M-11
WK35655 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
Proposed Revision of
B601-09
WK35656 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
Proposed Revision of
F561-05a(2010)
WK35657 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Proposed Revision of
A53/A53M-10
WK35659 Standard Specification for Wirebound Pallet-Type Wood Boxes
Proposed Revision of
D6254/D6254M-07
WK35660 Standard Specification for General Purpose Wirebound Shipping Boxes
Proposed Revision of
D6573/D6573M-01(2007)
WK35661 Standard Practice for Using a Personal Computer Printer as a Test Instrument
Proposed Revision of
F1174-01(2006)
WK35665 Standard Specification for Fluoropolymer Micropowders
Proposed Revision of
D5675-04(2010)
WK35667 Insulation Rating and Temperature Rating of Sleeping Pads
WK35668 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
Proposed Revision of
C1482-11
WK35669 Triglyceride Fuel as a Blend Stock
WK35670 workshop for the forthcoming committee meeting- March 2012
WK35671 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
Proposed Revision of
F2638-07
WK35672 Standard Test Method for Blast Resistance of Trash Receptacles
Proposed Revision of
E2639-09a
WK35673 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
Proposed Revision of
E2740-10
WK35674 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
Proposed Revision of
D4175-09ae1
WK35675
Proposed Revision of
WK35676 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
Proposed Revision of
D6984-11
WK35677 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
Proposed Revision of
D7320-11a
WK35678 Standard Test Methods for Polariscopic Examination of Glass Containers
Proposed Revision of
C148-00(2011)
WK35679 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
Proposed Revision of
D6121-11
WK35680 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
Proposed Revision of
D7589-11a
WK35681 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
Proposed Revision of
D7452-10
WK35682 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
Proposed Revision of
D5704-11
WK35683 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
Proposed Revision of
D5662-10
WK35684 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
Proposed Revision of
D5967-11
WK35685 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
Proposed Revision of
D7422-11
WK35686 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
Proposed Revision of
A283/A283M-03(2007)
WK35687 Installation Acceptance of Thermoplastic Non-Pressure Sewer Lines Using a Joint Isolation Test
WK35688 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
Proposed Revision of
A572/A572M-07
WK35689 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
Proposed Revision of
A871/A871M-03(2007)
WK35690 Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
Proposed Withdrawal of
A1019/A1019M-01(2007)
Replacement with None
WK35693 Corrugated Polyethylene Pipe for Mine Leachate Applications
WK35695 Standard Terminology Relating to Plastic Piping Systems
Proposed Revision of
F412-09
WK35696 Standard Terminology Relating to Plastic Piping Systems
Proposed Revision of
F412-09
WK35697 Standard Test Method for Carbon Black-Tint Strength
Proposed Revision of
D3265-11
WK35698 Standard Guide for Measuring and Reporting Friction Coefficients
Proposed Revision of
G115-10
WK35700 Standard Practice for Application of Hose Stream
Proposed Revision of
E2226-11
WK35701 Standard Guide for Fire-Resistance Experiments
Proposed Revision of
E2748-11
WK35702 Materials and Energy Information Modeling for Sustainable Products
WK35703 Sustainable Manufacturing
WK35704 Printing Ink Vehicles and Related Materials
WK35705 Sustainability of Manufacturing Processes
WK35706 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
Proposed Revision of
D2837-11
WK35708 Standard Specification for Concrete Aggregates
Proposed Revision of
C33/C33M-11a
WK35710 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
Proposed Revision of
A217/A217M-11
WK35711 Standard Guide for Practical Lubricant Condition Data Trend Analysis
Proposed Revision of
D7669-11
WK35712 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
Proposed Revision of
C1129-89(2008)
WK35713
Proposed Revision of
WK35714 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
Proposed Revision of
C1594-10
WK35726 Defect Criteria for Bearing Balls
WK35727 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
Proposed Revision of
A710/A710M-02(2007)
WK35728 Standard Terminology Relating to Carbon Black
Proposed Revision of
D3053-10
WK35729 Pole Vault Box Collar
WK35730 Standard Specification for Expanded Metal Fence Systems for Security Purposes
Proposed Revision of
F2548-06
WK35731 Standard Specification for Admixtures for Masonry Mortars
Proposed Revision of
C1384-06a
WK35732 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
Proposed Revision of
C1601-10
WK35733 Standard Test Method for Water Penetration and Leakage Through Masonry
Proposed Revision of
E514/E514M-09
WK35734 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
Proposed Revision of
C1532-06
WK35735 Standard Terminology of Masonry
Proposed Revision of
C1232-10c
WK35736 Bonded Rubber Crumb Flooring
WK35737 Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
Proposed Revision of
E1494-92(2010)
WK35742 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
Proposed Revision of
C791-04
WK35745 Standard Test Method for Using Atmospheric Pressure Rotating Cage
Proposed Revision of
G202-09
WK35746 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
Proposed Revision of
D7296-06
WK35749 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
Proposed Revision of
D6742/D6742M-07
WK35750 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
Proposed Revision of
D7336/D7336M-07
WK35751 Standard Test Method for Water Migration in Honeycomb Core Materials
Proposed Revision of
F1645/F1645M-07
WK35752 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
Proposed Revision of
D6938-10
WK35753 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
Proposed Revision of
A656/A656M-10
WK35754 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
Proposed Revision of
D5800-10
WK35755 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
Proposed Revision of
E2050-99(2004)
WK35756 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
Proposed Revision of
D7200-06
WK35762 WaterfrontUNIFORMAT II
WK35763 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
Proposed Revision of
A817-07
WK35766 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
Proposed Revision of
F2206-11
WK35767 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
Proposed Revision of
D6521-08
WK35770 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-11b
WK35771 Standard Consumer Safety Specification for Bassinets and Cradles
Proposed Revision of
F2194-10
WK35772 Standard Specification for Miter-Bends (Elbows) Fabricated by Heat Fusion Joining Polyethylene Pressure Pipe Segments using Nominal Pipe Sizes 2-inch to 65-inch.
WK35773 Polyethylene Reducing Tee Massive Base Branch Saddles (MBBS) for Outlet Diameters in Nominal Pipe Sizes 2-inch to 36-inch, for Sidewall Heat-Fusion to Polyethylene Pipe Mains.
WK35774 Mechanical Joint (MJ) Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes (NPS) 2-inch to 60-inch (63mm to 1524mm).
WK35775 End Caps for Polyethylene Pressure pipe in Nominal Pipe Sizes (NPS) 2-inch to 54-inch ( 63mm to 1372mm)
WK35776 The Classification, Design, Manufacture, Installation, Operation and Maintenance of Trampoline Parks
WK35777 Equal Outlet Pipe Tees Fabricated by Heat Fusion Joining Polyethylene Pressure Pipe Segments of Nominal Pipe Sizes (NPS) 2-inch to 65-inch (63mm to 1651mm)
WK35778 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
Proposed Revision of
D6956-11
WK35779 Pipe WYES Fabricated by Heat-Fusion Joining Mitered Polyethylene Pressure Pipe Segments of Nominal Pipe Sizes (NPS) 2-inch to 65-inch, using Flat Heater Plates.
WK35780 Standard test Method for Resistance to Fuzzing of Loop Pile yarn Floor Covering
WK35784 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
Proposed Revision of
E1623-11
WK35785 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
Proposed Revision of
E1623-11
WK35786 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
Proposed Revision of
A961/A961M-11
WK35787 Standard Test Methods for Water Vapor Transmission of Materials
Proposed Revision of
E96/E96M-10
WK35788 Standard Test Methods for Water Vapor Transmission of Materials
Proposed Revision of
E96/E96M-10
WK35804 Standard Specification for Fuel Oils
Proposed Revision of
D396-10
WK35805 Standard Specification for Gas Turbine Fuel Oils
Proposed Revision of
D2880-03(2010)
WK35806 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Proposed Revision of
C1064/C1064M-08
WK35807 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
Proposed Revision of
E1529-10
WK35808 Standard Specification for Gas Turbine Fuel Oils
Proposed Revision of
D2880-03(2010)
WK35809 Standard Specification for Test Coupons for Steel Castings
Proposed Revision of
A1067-10
WK35812 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
Proposed Revision of
D525-05
WK35813 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
Proposed Revision of
E1956
WK35814 Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms
Proposed Revision of
E2449-05
WK35815 Standard Practice for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
Proposed Revision of
F1356-08
WK35816 Standard Guide for Use of Radiation-Sensitive Indicators
Proposed Revision of
E1539
WK35821 / Guide for Highway Classification Systems with User Requirements and Test Methods
WK35824 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
Proposed Revision of
F2831-11
WK35826 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
Proposed Revision of
F2459-05
WK35827 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
Proposed Revision of
D4239-11
WK35829 Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus
Proposed Revision of
D750-06
WK35831 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
Proposed Revision of
D873-02(2007)
WK35833 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
Proposed Revision of
D7715-11
WK35834 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
Proposed Withdrawal of
C1656-07
Replacement with None
WK35835 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35836 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35837 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35838 Standard Test Method for Fire Testing of Upholstered Furniture
Proposed Revision of
E1537-07
WK35839 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35840 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35841 Standard Test Method for Fire Testing of Mattresses
Proposed Revision of
E1590-07
WK35842
Proposed Revision of
WK35843 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK35844 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK35845 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK35846 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK35847 On-Line/At-Line Determination of Ammonia in Biogas and Other Gaseous Fuels by Chemiluminescence Detection.
WK35848 Standard Guide for Room Fire Experiments
Proposed Revision of
E603-07
WK35849 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
Proposed Revision of
E2257-08
WK35850 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
Proposed Revision of
E1352-08a
WK35851 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
Proposed Revision of
E1353-08ae1
WK35852 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
Proposed Revision of
E1352-08a
WK35853 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
Proposed Revision of
E1353-08ae1
WK35854 Standard Test Method for Plutonium by Controlled-Potential Coulometry
Proposed Revision of
C1108-99(2006)
WK35855 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
Proposed Revision of
E136-11
WK35856 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
Proposed Revision of
E136-11
WK35857 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
Proposed Revision of
E2652-09a
WK35858 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
Proposed Revision of
E2652-09a
WK35859 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
Proposed Revision of
B746/B746M-02(2007)
WK35860 Standard Practice for Care and Use of Athletic Mouth Protectors
Proposed Revision of
F697-00(2006)
WK35864 Standard Terminology Relating to Hydraulic Cement
Proposed Revision of
C219-07a
WK35865 Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
Proposed Revision of
F2856-11a
WK35866 Standard Test Methods for Carbon Black—Dispersion in Rubber
Proposed Revision of
D2663-08
WK35867 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
Proposed Revision of
D6108-09
WK35868 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
Proposed Revision of
D6109-10
WK35869 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
Proposed Revision of
D6111-09
WK35870 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
Proposed Revision of
D6112-10
WK35871 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
Proposed Revision of
D6117-10
WK35872 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)
Proposed Revision of
D6341-10
WK35873 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
Proposed Revision of
D6662-09
WK35883 Standard Test Method for Fire Tests of Penetration Firestop Systems
Proposed Revision of
E814-11a
WK35884 Standard Specification for Perlite Thermal Insulation Board
Proposed Revision of
C728-05(2010)
WK35887
Proposed Revision of
WK35888 Standard Specification for Additive Manufacturing File Format (AMF)
Proposed Revision of
F2915-11
WK35889 Standard Specification for Chemical Admixtures for Concrete
Proposed Revision of
C494/C494M-11
WK35892
Proposed Revision of
WK35894 Hydraulic Fluids Used in High Pressure Mobile Applications
WK35902 Body Armor Measurement and Fitting
WK35903 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
Proposed Revision of
A677-07
WK35904 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
Proposed Revision of
E1804-07
WK35905 Standard Practice for Measuring Cost Risk of Buildings and Building Systems
Proposed Revision of
E1946-07
WK35906 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
Proposed Revision of
G69-97(2009)
WK35907 Breakaway Helmet Accessories
WK35908 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D4434/D4434M-11
WK35909 Standard Guide to Testing of Absorbable Stents and Stent Grafts
WK35910 Mountain Search and Rescue Technician (Mtn SAR-LIII)
WK35911 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
Proposed Revision of
D7284-08
WK35913 Determining Airtightness of Large and Multi-zone Buildings Using an Orifice Blower Door
WK35914 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
Proposed Revision of
C226-07
WK35915 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
Proposed Revision of
C1012/C1012M-10
WK35916 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Proposed Revision of
F1446-11a
WK35917 Archiving Traffic Incident Characteristics and Management Data
WK35918 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
Proposed Revision of
D7249/D7249M-06
WK35925 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
Proposed Revision of
F2376-08
WK35926 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
Proposed Revision of
F50-07
WK35927 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
Proposed Revision of
F51-00(2007)
WK35928 Standard Practice for the Selection of Spacecraft Materials
Proposed Revision of
E1997-07
WK35929 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
Proposed Revision of
E2217-02(2007)
WK35930 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
Proposed Revision of
A722/A722M-07
WK35931 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
Proposed Revision of
D2162-06
WK35932 Standard Test Method for Freezing Point of Aqueous Engine Coolants
Proposed Revision of
D1177-07
WK35933 Standard Test Method for Freezing Point of Aqueous Engine Coolants
Proposed Revision of
D1177-07
WK35939 the Characterization of Wear from the Articulating Surfaces in Retrieved MoM Hip Prostheses
WK35940 Standard Specification for Chemical Admixtures for Concrete
Proposed Revision of
C494/C494M-11
WK35941 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35942 Standard Test Methods for Silicone Fluids Used for Electrical Insulation
Proposed Revision of
D2225-04
WK35943 Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
Proposed Revision of
D2296-01(2006)
WK35944 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
Proposed Revision of
C469/C469M-10
WK35945 Standard Test Methods for Synthetic Dielectric Fluids For Capacitors
Proposed Revision of
D3809-01(2006)
WK35946 Standard Specification for Silicone Fluid Used for Electrical Insulation
Proposed Revision of
D4652-05
WK35947 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
Proposed Revision of
D6871-03(2008)
WK35948 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35949 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
Proposed Revision of
D3241-11a
WK35951 Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
Proposed Withdrawal of
C970-87(2006)
Replacement with None
WK35953 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Proposed Revision of
D5450/D5450M-11
WK35954 Standard Test Methods for Crosshole Seismic Testing
Proposed Revision of
D4428/D4428M-07
WK35955 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Proposed Revision of
A123/A123M-09
WK35957 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
Proposed Revision of
C704/C704M-09e1
WK35958 Standard Test Method for Yarn Number Using Automatic Tester
Proposed Revision of
D6587-00(2006)e1
WK35959 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
Proposed Revision of
D2559-10a
WK35962 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35963 Standard Specification for Wrought Stainless Steels for Surgical Instruments
Proposed Revision of
F899-11
WK35964 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35965 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35966 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
Proposed Revision of
F1580-07
WK35967 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-10
WK35968 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
Proposed Revision of
F519-10
WK35970 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
Proposed Revision of
D1370-00(2007)
WK35971 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
Proposed Revision of
E1064-08
WK35972 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
Proposed Revision of
E202-10
WK35973 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils - Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
Proposed Revision of
D7668-10
WK35974 Standard Practice for Design and Performance of Supported Glass Walkways
Proposed Revision of
E2751-11
WK35975 Standard Guide for Cleaning of Various Oiled Shorelines and Habitats
Proposed Revision of
F2464-05
WK35976 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
Proposed Revision of
F1334-11
WK35977 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK35978 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK35980 Standard Test Method for Insolubles In Used Lubricating Oils
Proposed Revision of
D893-05a(2010)
WK35981 Standard Specification for Strapping, Flat Steel and Seals
Proposed Revision of
D3953-07a
WK35982 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
Proposed Revision of
C1497-04
WK35983 Standard Specification for Pole Vault Landing Systems (Withdrawn 2011)
F1162-02
WK35985 Sustainable Laundry Best Management Practices
WK35986 Field Inspection of Transmission Poles and Lattice Towers
WK35987 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
Proposed Revision of
D446-07
WK35988 Radiochemical Analysis
WK35990 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
Proposed Revision of
E531-76(2007)
WK35991 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
Proposed Revision of
E1253-07
WK35992 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
Proposed Revision of
F2376-08
WK35993 Analysis Of Aluminum And Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
WK35994 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
Proposed Revision of
D5972-05(2010)
WK35995 Standard Practice for Preparing Coal Samples for Analysis
Proposed Revision of
D2013/D2013M-11
WK35996 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
Proposed Revision of
D609-00(2006)
WK35997 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
Proposed Revision of
D788-06
WK35998 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
Proposed Withdrawal of
C930-05
Replacement with None
WK35999 Standard Practice for Preparing Coal Samples for Analysis
Proposed Revision of
D2013/D2013M-11
WK36002 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
Proposed Revision of
F959M-07
WK36003 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-11
WK36004 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
Proposed Revision of
G84-89(2005)
WK36005 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
Proposed Revision of
D409/D409M-11
WK36006 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
Proposed Revision of
D409/D409M-11
WK36007 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
Proposed Revision of
A203/A203M-97(2007)e1
WK36008 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
Proposed Revision of
A204/A204M-03(2007)
WK36009 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
Proposed Revision of
A225/A225M-03(2007)
WK36010 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
Proposed Revision of
A285/A285M-03(2007)
WK36011 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
Proposed Revision of
A662/A662M-03(2007)
WK36012 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
Proposed Revision of
A734/A734M-87a(2007)
WK36013 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
Proposed Revision of
A735/A735M-03(2007)
WK36014 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
Proposed Revision of
A738/A738M-07
WK36015 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
Proposed Revision of
A302/A302M-03(2007)
WK36018 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
Proposed Revision of
C1668-10
WK36019 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
Proposed Revision of
C1744-10
WK36020 Standard Specification for Guideline Elements Model version 2 (GEM II)-Document Model for Clinical Practice Guidelines
Proposed Revision of
E2210-06
WK36022 Standard Specification for Precast Reinforced Concrete Manhole Sections
Proposed Revision of
C478-11
WK36026 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
Proposed Revision of
E1638-11a
WK36027 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
Proposed Revision of
D5673-10
WK36028 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
Proposed Revision of
C478M-11
WK36029 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
Proposed Revision of
D4708-07
WK36031 Standard Consumer Safety Performance Specification for Commercial Cribs
Proposed Revision of
F2710-08
WK36032 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
Proposed Revision of
D5305-97(2007)
WK36033 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
Proposed Revision of
D6874-03(2009)e1
WK36034 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-11
WK36035 Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders
Proposed Revision of
E2080-06
WK36036 Standard Guide for Design and Construction of Coal Ash Structural Fills (Withdrawn 2012)
E2277-03
WK36037 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
Proposed Revision of
A985/A985M-11a
WK36038 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Proposed Revision of
A957/A957M-11a
WK36039 Standard Practice for Investigating Electrical Incidents
Proposed Revision of
E2345-04
WK36040 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
Proposed Revision of
A612/A612M-03(2007)
WK36041 Standard Specification for Cationic Emulsified Asphalt
Proposed Revision of
D2397-05
WK36042 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
Proposed Revision of
A736/A736M-03(2007)
WK36043 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
Proposed Revision of
A455/A455M-03(2007)
WK36044 Steel Sheet,Cold-Rolled, Commercial,Structural, High Strength Low Alloy, High Strength Low Alloy with Improved Formability, Produced by the Twin Roll Casting Process
WK36047 Standard Test Method for Water Absorption of Rigid Cellular Plastics
Proposed Revision of
D2842-06
WK36048 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
Proposed Revision of
D3453-07
WK36049 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
Proposed Revision of
B856-11
WK36051 Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity
Proposed Revision of
D5173-97(2007)
WK36052 Standard Test Method for Quantification of a Pseudomonas aeruginosa Biofilm Grown with Shear and Continuous Flow Using a Rotating Disk Reactor
Proposed Revision of
E2196-07
WK36053 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor
Proposed Revision of
E2562-07
WK36054 Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings
WK36055 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
Proposed Revision of
C1482-11
WK36058 Multivariate data analysis related to pharmaceutical development and manufacturing
WK36059 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
Proposed Revision of
E1007-11e1
WK36060 Guide for Science-based and Risk-based Cleaning Process Development and Validation
WK36062 Standard Practice for Determining Load Resistance of Glass in Buildings
Proposed Revision of
E1300-09a
WK36063 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
Proposed Revision of
D2872-04
WK36065 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Proposed Revision of
F1960-11e1
WK36066 Standard Test Method for Viscosity of Resin Solutions
Proposed Revision of
D1725-04
WK36067 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
Proposed Revision of
B139/B139M-07
WK36068 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
Proposed Revision of
B206/B206M-07
WK36069 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
Proposed Revision of
B272-07
WK36072 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
Proposed Revision of
D4332-01(2006)
WK36077 for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
WK36078 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
Proposed Revision of
E2580-07
WK36079 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
Proposed Revision of
E636-10
WK36081 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
Proposed Revision of
D7619-10
WK36082 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
Proposed Revision of
C1335-04(2009)
WK36083 Standard Practice for Use of Sealants in Acoustical Applications
Proposed Revision of
C919-08
WK36086 Particle analysis Applications in Pharmaceutical Processes including SUB-Visible particle analysis
WK36087 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-11
WK36088 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-11
WK36089 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
Proposed Revision of
C652-11
WK36093 Determination of Oxidation Stability and Insoluble Formation of Inhibited Turbine Oils at 120C Without the Inclusion of Water (Dry TOST method)
WK36094 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
Proposed Revision of
C183-08
WK36095 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
Proposed Revision of
C511-09
WK36097 Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water
Proposed Revision of
D3649-06
WK36098 Standard Test Method for Alpha- And Beta- Activity in Water By Liquid Scintillation Counting
Proposed Revision of
D7283-06
WK36099 Standard Test Methods for Identification of Fibers in Textiles
Proposed Revision of
D276-00a(2008)
WK36100 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Proposed Revision of
D445-11a
WK36109 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems (Withdrawn 2012)
F1649-96(2003)
WK36110 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications (Withdrawn 2012)
B483/B483M-03
WK36111 Heat exchanger tube inspection using Acoustic Pulse Reflectometry (APR)
WK36115 Standard Specification for Welded Stainless Steel Mechanical Tubing
Proposed Revision of
A554-11
WK36116 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
Proposed Revision of
E2775-11
WK36121 Determination of p-Toluic Acid and 4-Carboxybenzaldehyde in Purified Terephthalic Acid by High Performance Liquid Chromatography
WK36122 Determination of p-Toluic Acid and 4-Carboxybenzaldehyde in Purified Terephthalic Acid by High Performance Capillary Electrophoresis
WK36123 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
Proposed Revision of
D5069-07
WK36127 Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
WK36128 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
Proposed Revision of
D6446-01(2006)
WK36130 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
Proposed Revision of
C1077-11b
WK36131 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
Proposed Revision of
D6332-99(2005)
WK36132 Standard Practice for Establishing Allowable Stresses for Round Timber Piles
Proposed Revision of
D2899-11
WK36133 Determination of Yield Stress of Paints, Inks and Related Liquid Materials
WK36134 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
Proposed Revision of
C881/C881M-10
WK36135 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
Proposed Revision of
C612-10
WK36136 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
Proposed Revision of
C1393-11
WK36138 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
Proposed Revision of
C553-11
WK36139 Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
WK36140 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
Proposed Revision of
D1596-97(2011)
WK36141 Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation
Proposed Withdrawal of
D372-00(2006)
Replacement with None
WK36142 Standard Test Method for Moisture Expansion of Fired Whiteware Products
Proposed Revision of
C370-88(2006)
WK36143 Standard Test Method for Determination of
Proposed Revision of
C1607-06
WK36144 Nameplate, Datasheet and Sampling Requirements of Photovoltaic Modules
WK36145 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
Proposed Revision of
E1515-07
WK36146 Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay
Proposed Revision of
E2799-11
WK36147 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
Proposed Revision of
F838-05
WK36148 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
Proposed Revision of
C126-11
WK36149 Standard Specification for Glazed Brick (Single Fired, Brick Units)
Proposed Revision of
C1405-10
WK36150 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
Proposed Revision of
C62-10
WK36151 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
Proposed Revision of
C652-11
WK36152 Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular
Proposed Revision of
D6458-99(2006)
WK36153 Standard Tables of Body Measurements for Boys, Sizes 6 to 24 Husky
Proposed Revision of
D6860/D6860M-09
WK36154 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
Proposed Revision of
E2837-11
WK36155 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
Proposed Revision of
C670-10
WK36156 Standard Test Method for Bond Strength of Mortar to Masonry Units
Proposed Revision of
C952-02(2009)
WK36157 Maleic Acid in Maleic Anhydride by Potentiometric Titration
WK36158 Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
WK36160 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
Proposed Revision of
E2223-07
WK36161 Standard Performance Specification for Padlocks
Proposed Revision of
F883-09
WK36162 Resource Augmentation
WK36163 Standard Guide for Transport Packaging Design
Proposed Revision of
D6198-07
WK36164 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
Proposed Revision of
D3162-94(2005)
WK36166 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
Proposed Revision of
D3685/D3685M-98(2005)
WK36167 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
Proposed Revision of
D3267-91(2005)
WK36168 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
Proposed Revision of
D3824-95(2005)
WK36169 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
Proposed Revision of
D6331-98(2005)
WK36170 Standard Test Method for Rate of Water Absorption of Masonry Mortars
Proposed Revision of
C1403-06
WK36171 Standard Specification for Silica Fume Used in Cementitious Mixtures
Proposed Revision of
C1240-11
WK36172 Standard Practice for Accreditation of Testing Agencies for Masonry
Proposed Revision of
C1093-11
WK36180 Standard Classification of Child-Resistant Packages
Proposed Revision of
D3475-11
WK36181 Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
WK36182 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
Proposed Revision of
D642-00(2010)
WK36183 Standard Practice for Performance Testing of Shipping Containers and Systems
Proposed Revision of
D4169-09
WK36184 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
Proposed Revision of
D6653/D6653M-01(2010)e1
WK36185 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
Proposed Revision of
D7386-08
WK36186 Standard Practice for Organizing and Managing Building Data
Proposed Revision of
E2166-07
WK36187 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
Proposed Revision of
D7043-10
WK36188 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Proposed Revision of
D5185-09
WK36189 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF 3, CHF2 CF3, and CO2)
Proposed Revision of
D7326-06e1
WK36190 Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)
Proposed Revision of
D7327-07
WK36191 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Proposed Revision of
D92-11
WK36192 Standard Test Method for Bulk Density of Level Paintbrush Filaments
Proposed Revision of
D5959-96(2007)
WK36193 Standard Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)
Proposed Revision of
E2000-05
WK36198 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Proposed Revision of
D92-11
WK36199 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
Proposed Revision of
D6450-05(2010)
WK36200 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
Proposed Revision of
D7094-04(2009)
WK36201 Standard Specification for Gypsum Board
Proposed Revision of
C1396/C1396M-11
WK36202 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
Proposed Revision of
D2488-09a
WK36203 Standard Practice for X-Ray Radiography of Soil Samples
Proposed Revision of
D4452-06
WK36204 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
Proposed Revision of
G7/G7M-11
WK36205 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
Proposed Revision of
D2850-03a(2007)
WK36206 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
Proposed Revision of
D4767-11
WK36207 Standard Practice for
Capping Cylindrical Concrete Specimens
Proposed Revision of
C617/C617M-11
WK36208 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
Proposed Revision of
C1231/C1231M-10a
WK36209 Monitoring Failure Progression in Plain and Roller Bearing Failure Modes
WK36210 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
Proposed Revision of
D6927-06
WK36211 MEASUREMENT OF SYNTHETIC TURF SYSTEM INFILL DEPTHS IN THE LABORATORY AND FIELD
WK36212 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
Proposed Revision of
C1637-06
WK36213 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
Proposed Revision of
D6264/D6264M-07
WK36214 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
Proposed Revision of
D7136/D7136M-07
WK36215 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
Proposed Revision of
D7137/D7137M-07
WK36216 Standard Practice for the Selection of Spacecraft Materials
Proposed Revision of
E1997-07
WK36217 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
Proposed Revision of
F331-05
WK36218 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
Proposed Revision of
F51-00(2007)
WK36219 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
Proposed Revision of
E2088-06
WK36220 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
Proposed Revision of
F50-07
WK36221 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
Proposed Revision of
E693-01(2007)
WK36222 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
Proposed Revision of
E693-01(2007)
WK36223 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
Proposed Revision of
F331-05
WK36224 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
Proposed Revision of
D822-01(2006)
WK36225 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
Proposed Revision of
D3361-01(2006)
WK36226 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
Proposed Revision of
D5031-01(2006)
WK36227 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
Proposed Revision of
E1006-08
WK36230 Standard Specification for Mortars for the Repair of Historic Masonry
Proposed Revision of
C1713-11
WK36231 Standard Guide for Subsurface Injection of In-Situ Remedial Reagents
WK36232 Measuring Adhesion of Serially-Passaged Chondrocytes to Polystyrene Surfaces by a Centrifugation Assay
WK36235 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
Proposed Revision of
D4404-10
WK36241 Polyester Compostion Floor Tile
WK36242 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
Proposed Revision of
F2931-11
WK36243 Standard Table of Commercial Moisture Regains for Textile Fibers
Proposed Revision of
D1909-04
WK36245 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-11b
WK36246 Standard Specification for Cationic Emulsified Asphalt
Proposed Revision of
D2397-05
WK36247 Standard Guide for Calibrating a Groundwater Flow Model Application
Proposed Revision of
D5981-96(2008)
WK36248 Standard Specification for Slag Cement for Use in Concrete and Mortars
Proposed Revision of
C989-10
WK36249 Standard Test Methods for Downhole Seismic Testing
Proposed Revision of
D7400-08
WK36250 Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
Proposed Revision of
E265-07e1
WK36251 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
Proposed Revision of
F2437-11
WK36252 Standard Test Method for Performance of Conveyor Toasters
Proposed Revision of
F2380-04(2010)
WK36253 Standard Specification for Brass Rod, Bar, and Shapes
Proposed Revision of
B927/B927M-09
WK36254 Standard Test Method for Performance of Double-Sided Griddles
Proposed Revision of
F1605-95(2007)
WK36255 Standard Test Method for Performance of Braising Pans
Proposed Revision of
F1786-97(2010)
WK36256 Standard Test Methods for Chloride Ion In Water
Proposed Revision of
D512-10
WK36257 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
Proposed Revision of
D6477-11
WK36258 Tensile Testing of High Performance Polyethylene Fibers
WK36260 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
Proposed Revision of
F2418-11
WK36261 Selection of Exterior Intrusion Detection Sensors
WK36262 Tensile Testing of Aramid Paper
WK36264 Determining Long-Term Connection Strength Displacement (Creep) Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
WK36265 Portable Air Gun Shooting Range
WK36266 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
Proposed Revision of
D1492-08e1
WK36267 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
Proposed Revision of
D7566-11a
WK36268 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces
Proposed Revision of
F2508-11
WK36269 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
Proposed Revision of
E454-11
WK36270 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
Proposed Revision of
E674-11
WK36271 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
Proposed Revision of
E262-08
WK36272 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
Proposed Revision of
E1894-08
WK36273 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-11
WK36274 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
Proposed Revision of
D6562-06(2011)
WK36275 Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable
Proposed Withdrawal of
F1040-87(2007)
Replacement with None
WK36276 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-11
WK36277 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
Proposed Revision of
D5025-11
WK36281 Standard Consumer Safety Specification for Infant Walkers
Proposed Revision of
F977-11b
WK36282 Selection of Coating for Repair and Rehabilitation of Buried Pipe Coatings for Nuclear Power Plants.
WK36283 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-11
WK36284 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
Proposed Revision of
F1868-09
WK36287 Standard Specification for Concrete Building Brick
Proposed Revision of
C55-11
WK36288 Standard Specification for Loadbearing Concrete Masonry Units
Proposed Revision of
C90-11b
WK36289 Standard Specification for Nonloadbearing Concrete Masonry Units
Proposed Revision of
C129-11
WK36290 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
Proposed Revision of
C139-11
WK36291 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Proposed Revision of
C140-11a
WK36292 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
Proposed Withdrawal of
F1819-07
Replacement with None
WK36293 Standard Specification for Concrete Grid Paving Units
Proposed Revision of
C1319-11
WK36294 Standard Specification for Dry-Cast Segmental Retaining Wall Units
Proposed Revision of
C1372-11
WK36295 Standard Specification for Concrete Roof Pavers
Proposed Revision of
C1491-11
WK36296 Standard Specification for Manufactured Concrete Masonry Lintels
Proposed Revision of
C1623-11
WK36297 Standard Specification for Concrete Facing Brick
Proposed Revision of
C1634-11
WK36298 Long Term Efficiency of Drainage Geocomposites
WK36299 D3485, Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
WK36300 Standard Specification for Precision Electroformed Sieves
Proposed Revision of
E161-00(2010)
WK36301 Standard Practice for Sampling of Geosynthetics for Testing
Proposed Revision of
D4354-99(2009)
WK36302 SELECTION OF CHEMICAL FIELD SCREENING AND FIELD ANALYTICAL METHODS USED IN VADOSE ZONE INVESTIGATIONS
WK36303 Standard Practice for Measuring Curl in Paint Brush Filling Material
Proposed Revision of
D6957-08
WK36304 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
Proposed Withdrawal of
D6446-01(2006)
Replacement with None
WK36306 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
Proposed Revision of
D6698-07
WK36307 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
Proposed Revision of
D6855-10
WK36308 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
Proposed Revision of
E1164-09a
WK36309 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
Proposed Revision of
D7315-07a
WK36310 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova
Proposed Revision of
E1517-99(2006)
WK36311 Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
Proposed Revision of
E951-94(2006)
WK36316 Standard Test Method for Effectiveness of Liquid, Gel, or Cream Insecticides Against Adult Human Lice
Proposed Revision of
E938-05(2011)e1
WK36317 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
Proposed Revision of
D1267-02(2007)
WK36318 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
Proposed Revision of
D2598-02(2007)
WK36319 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK36320 Soluble Residues in LPG by GC
WK36324 Standard Test Methods for Bleeding of Concrete
Proposed Revision of
C232/C232M-09
WK36325 Standard Test Methods for Bleeding of Concrete
Proposed Revision of
C232/C232M-09
WK36326 Standard Specification for Emulsified Asphalt
Proposed Revision of
D977-05
WK36327 Standard Specification for Cationic Emulsified Asphalt
Proposed Revision of
D2397-05
WK36329 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
Proposed Revision of
D6066-11
WK36330 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
Proposed Revision of
C732-06
WK36331 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
Proposed Revision of
E411-05
WK36332 Standard Specification for Aviation Turbine Fuels
Proposed Revision of
D1655-11b
WK36333 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
Proposed Revision of
D3241-11a
WK36334 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
Proposed Revision of
D5452-08
WK36335 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-11
WK36336 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-11
WK36337 Standard Specification for Unleaded Aviation Gasoline
Proposed Revision of
D7547-11
WK36340 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
Proposed Revision of
F2550-06
WK36341 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
Proposed Revision of
A484/A484M-11
WK36342 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Proposed Revision of
D3261-10a