14001 - ANSI/ISO Environmental Management Systems--Specification with Guidance for Use
14004 - ANSI/ISO Environmental Management Systems--General Guidelines on Principles, Systems and Supporting Techniques
14010 - ANSI/ISO Guidelines for Environmental Auditing--General Principles
14011 - ANSI/ISO Guidelines for Environmental Auditing--Audit Procedures--Auditing of Environmental Management Systems
14012 - ANSI/ISO Guidelines for Environmental Auditing--Qualification Criteria for Environmental Auditors
A1 - Standard Specification for Carbon Steel Tee Rails
A2 - Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3 - Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M - Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A21 - Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use
A27/A27M - Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M - Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
A31 - Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M - Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M - Standard Specification for Carbon Structural Steel
A47/A47M - Standard Specification for Ferritic Malleable Iron Castings
A48M - Standard Specification for Gray Iron Castings [Metric]
A48 - Standard Specification for Gray Iron Castings
A49 - Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A65 - Standard Specification for Steel Track Spikes
A66 - Standard Specification for Steel Screw Spikes
A67 - Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74 - Standard Specification for Cast Iron Soil Pipe and Fittings
A82 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A99 - Standard Specification for Ferromanganese
A100 - Standard Specification for Ferrosilicon
A101 - Standard Specification for Ferrochromium
A102 - Standard Specification for Ferrovanadium
A105/A105M - Standard Specification for Carbon Steel Forgings for Piping Applications
A106 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108 - Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
A109/A109M - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111 - Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A116 - Standard Specification for Zinc-Coated (Galvanized) Steel Woven Wire Fence Fabric
A121 - Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
A123/A123M - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125 - Standard Specification for Steel Springs, Helical, Heat-Treated
A126 - Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M - Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M - Standard Specification for Structural Steel for Ships
A132 - Standard Specification for Ferromolybdenum
A134 - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135 - Standard Specification for Electric-Resistance-Welded Steel Pipe
A139 - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143 - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A146 - Standard Specification for Molybdenum Oxide Products
A148/A148M - Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159 - Standard Specification for Automotive Gray Iron Castings
A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176 - Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A178/A178M - Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M - Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M - Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183 - Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M - Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A185 - Standard Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement
A192/A192M - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M - Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
A194/A194M - Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
A197/A197M - Standard Specification for Cupola Malleable Iron
A202/A202M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
A203/A203M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M - Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
A217/A217M - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure- Containing Parts, Suitable for High-Temperature Service
A220/A220M - Standard Specification for Pearlitic Malleable Iron
A225/A225M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M - Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M - Standard Specification for Steel Wire, Music Spring Quality
A229/A229M - Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A230/A230M - Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M - Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M - Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239 - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M - Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
A242/A242M - Standard Specification for High-Strength Low-Alloy Structural Steel
A247 - Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M - Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A252 - Standard Specification for Welded and Seamless Steel Pipe Piles
A254 - Standard Specification for Copper-Brazed Steel Tubing
A255 - Standard Test Method for Determining Hardenability of Steel
A262 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263 - Standard Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip
A264 - Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip
A265 - Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M - Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M - Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A275/A275M - Standard Test Method for Magnetic Particle Examination of Steel Forgings
A276 - Standard Specification for Stainless Steel Bars and Shapes
A278M - Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 350°C
A278 - Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F
A285/A285M - Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288 - Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M - Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290 - Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291 - Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295 - Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304 - Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307 - Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308 - Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309 - Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M - Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
A313/A313M - Standard Specification for Stainless Steel Spring Wire
A314 - Standard Specification for Stainless Steel Billets and Bars for Forging
A319 - Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M - Standard Specification for Alloy Steel Bolting Materials for Low-Temperature Service
A321 - Standard Specification for Steel Bars, Carbon, Quenched and Tempered
A322 - Standard Specification for Steel Bars, Alloy, Standard Grades
A323 - Standard Specification for Ferroboron
A324 - Standard Specification for Ferrotitanium
A325M - Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
A325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A327M - Standard Test Methods for Impact Testing of Cast Irons (Metric)
A327 - Standard Test Methods for Impact Testing of Cast Irons
A331 - Standard Specification for Steel Bars, Alloy, Cold-Finished
A333/A333M - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M - Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338 - Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340 - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M - Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342 - Standard Test Methods for Permeability of Feebly Magnetic Materials
A343 - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345 - Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M - Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M - Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
A352/A352M - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M - Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A354 - Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355 - Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M - Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
A363 - Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A366/A366M - Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled
A367 - Standard Test Methods of Chill Testing of Cast Iron
A368 - Standard Specification for Stainless Steel Wire Strand
A369/A369M - Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M - Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377 - Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380 - Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381 - Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384 - Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M - Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
A389/A389M - Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390 - Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M - Standard Specification for Grade 80 Alloy Steel Chain
A392 - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394 - Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M - Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400 - Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M - Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407 - Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M - Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411 - Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M - Standard Specification for Carbon Steel Chain
A414/A414M - Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A416/A416M - Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A417 - Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
A418 - Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M - Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424 - Standard Specification for Steel, Sheet, for Porcelain Enameling
A426 - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427 - Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M - Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434 - Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436 - Standard Specification for Austenitic Gray Iron Castings
A437/A437M - Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A438 - Standard Test Method for Transverse Testing of Gray Cast Iron
A439 - Standard Specification for Austenitic Ductile Iron Castings
A447/A447M - Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449 - Standard Specification for Quenched and Tempered Steel Bolts and Studs
A450/A450M - Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
A451 - Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M - Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M - Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M - Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A459 - Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460 - Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M - Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M - Standard Specification for Weldless Chain
A467/A467M - Standard Specification for Machine and Coil Chain
A469 - Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470 - Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings For Turbine Rotors and Shafts
A471 - Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472 - Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473 - Standard Specification for Stainless Steel Forgings
A474 - Standard Specification for Aluminum-Coated Steel Wire Strand
A475 - Standard Specification for Zinc-Coated Steel Wire Strand
A476M - Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls [Metric]
A476 - Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478 - Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481 - Standard Specification for Chromium Metal
A482 - Standard Specification for Ferrochrome-Silicon
A483 - Standard Specification for Silicomanganese
A484/A484M - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485 - Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M - Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489 - Standard Specification for Carbon Steel Lifting Eyes
A490M - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A490 - Standard Specification for Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength
A491 - Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492 - Standard Specification for Stainless Steel Rope Wire
A493 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M - Standard Specification for Castings, Nickel and Nickel Alloy
A495 - Standard Specification for Calcium-Silicon Alloys
A496 - Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497 - Standard Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement
A498 - Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins
A499 - Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
A500 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A503/A503M - Standard Specification for Ultrasonic Examination of Large Forged Crankshafts
A504 - Standard Specification for Wrought Carbon Steel Wheels
A505 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Regular Quality and Structural Quality
A507 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Drawing Quality
A508/A508M - Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A510 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A511 - Standard Specification for Seamless Stainless Steel Mechanical Tubing
A512 - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M - Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519 - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A520 - Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction
A521 - Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M - Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523 - Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524 - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A530/A530M - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M - Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M - Standard Specification for Abrasion-Resistant Cast Irons
A533/A533M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534 - Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536 - Standard Specification for Ductile Iron Castings
A537/A537M - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A539 - Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
A540/A540M - Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A541/A541M - Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550 - Standard Specification for Ferrocolumbium
A551 - Standard Specification for Steel Tires
A553/A553M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M - Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M - Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M - Standard Specification for Castings, Chromium-Nickel Alloy
A561 - Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
A562/A562M - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563M - Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A563 - Standard Specification for Carbon and Alloy Steel Nuts
A564/A564M - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565 - Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service
A568/A568M - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A569/A569M - Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
A570/A570M - Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality
A571M - Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service [Metric]
A571 - Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M - Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574M - Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A574 - Standard Specification for Alloy Steel Socket-Head Cap Screws
A575 - Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M - Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M - Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A579 - Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M - Standard Specification for Stainless Steel Wire
A581/A581M - Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M - Standard Specification for Free-Machining Stainless Steel Bars
A583 - Standard Specification for Cast Steel Wheels for Railway Service
A584 - Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric
A585 - Standard Specification for Aluminum-Coated Steel Barbed Wire
A586 - Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
A587 - Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M - Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4 in. [100 mm] Thick
A589 - Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A591/A591M - Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
A592/A592M - Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A595 - Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
A596/A596M - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597 - Standard Specification for Cast Tool Steel
A598 - Standard Test Method for Magnetic Properties Of Magnetic Amplifier Cores
A599/A599M - Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600 - Standard Specification for Tool Steel High Speed
A601 - Standard Specification for Electrolytic Manganese Metal
A602 - Standard Specification for Automotive Malleable Iron Castings
A603 - Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604 - Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A607 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
A608 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M - Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610 - Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A611 - Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
A612/A612M - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M - Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A618 - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A620/A620M - Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled
A622/A622M - Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled
A623M - Standard Specification for Tin Mill Products, General Requirements [Metric]
A623 - Standard Specification for Tin Mill Products, General Requirements
A624/A624M - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M - Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A626/A626M - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627 - Standard Specification for Homogeneous Tool-Resisting Steel Bars for Security Applications
A629 - Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
A630 - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled
A636 - Standard Specification for Nickel Oxide Sinter
A638/A638M - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640 - Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M - Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644 - Standard Terminology Relating to Iron Castings
A645/A645M - Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646 - Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648 - Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M - Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M - Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M - Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M - Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M - Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660 - Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M - Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664 - Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M - Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671 - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672 - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M - Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674 - Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677M - Standard Specification for Nonoriented Electrical Steel, Fully Processed Types (Metric)
A677 - Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M - Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M - Standard Specification for Steel Wire, High Tensile Strength, Hard Drawn
A681 - Standard Specification for Tool Steels Alloy
A682/A682M - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A683/A683M - Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686 - Standard Specification for Tool Steel, Carbon
A688/A688M - Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689 - Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M - Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A691 - Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693 - Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M - Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A695 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications
A696 - Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697 - Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M - Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700 - Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A701 - Standard Specification for Ferromanganese-Silicon
A702 - Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M - Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M - Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M - Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A707/A707M - Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M - Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A710/A710M - Standard Specification for Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711 - Standard Specification for Steel Forging Stock
A712 - Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713 - Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A714 - Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A715 - Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability
A716 - Standard Specification for Ductile Iron Culvert Pipe
A717/A717M - Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719 - Standard Test Method for Lamination Factor of Magnetic Materials
A720 - Standard Test Method for Ductility of Nonoriented Electrical Steel
A721 - Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M - Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
A723/A723M - Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726/A726M - Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M - Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729 - Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A730 - Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
A732/A732M - Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A734/A734M - Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735/A735M - Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M - Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A737/A737M - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739 - Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740 - Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741 - Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M - Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M - Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M - Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746 - Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M - Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M - Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M - Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A750 - Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
A751 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A752 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A753 - Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M - Standard Test Method for Coated Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M - Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756 - Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759 - Standard Specification for Carbon Steel Crane Rails
A760/A760M - Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M - Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764 - Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M - Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A768 - Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M - Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
A770/A770M - Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A771/A771M - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
A772/A772M - Standard Test Method for ac Magnetic Permeability of Materials Using Sine Current
A773/A773M - Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A774/A774M - Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M - Standard Specification for Epoxy-Coated Reinforcing Steel Bars
A778 - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M - Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780 - Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A782/A782M - Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A786/A786M - Standard Specification for Rolled Steel Floor Plates
A787 - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788 - Standard Specification for Steel Forgings, General Requirements
A789/A789M - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M - Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793 - Standard Specification for Rolled Floor Plate, Stainless Steel
A794 - Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
A795 - Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M - Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M - Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M - Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M - Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801/A801M - Standard Specification for Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650
A802/A802M - Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A803/A803M - Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M - Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805 - Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M - Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A808/A808M - Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A809 - Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810 - Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811 - Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A813/A813M - Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M - Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817 - Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric
A818 - Standard Specification for Coppered Carbon Steel Wire
A820 - Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M - Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A822 - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823 - Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824 - Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A826/A826M - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
A827/A827M - Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M - Standard Specification for Alloy Structural Steel Plates
A830/A830M - Standard Specification for Plastes, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A831/A831M - Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
A832/A832M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833 - Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834 - Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835 - Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M - Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837 - Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838/A838M - Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications
A839/A839M - Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A840M - Standard Specification for Fully Processed Magnetic Lamination Steel (Metric)
A840 - Standard Specification for Fully Processed Magnetic Lamination Steel
A841/A841M - Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842 - Standard Specification for Compacted Graphite Iron Castings
A844/A844M - Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A845 - Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel
A846 - Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
A847 - Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848/A848M - Standard Specification for Low-Carbon Magnetic Iron
A849 - Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A851 - Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes
A852/A852M - Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A853 - Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M - Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M - Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M - Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M - Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M - Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A861 - Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M - Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865 - Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866 - Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867/A867M - Standard Specification for Iron-Silicon Relay Steels
A871/A871M - Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872 - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M - Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M - Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
A876/A876M - Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M - Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A878/A878M - Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879 - Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A880 - Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
A881/A881M - Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A882/A882M - Standard Specification for Epoxy-Coated Seven-Wire Prestressing Steel Strand
A883 - Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
A884/A884M - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
A885/A885M - Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A886/A886M - Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887 - Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888 - Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
A890/A890M - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891 - Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892 - Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893 - Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A894/A894M - Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A895 - Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896 - Standard Practice for Conducting Case Studies on Galvanized Structures
A897M - Standard Specification for Austempered Ductile Iron Castings [Metric]
A897 - Standard Specification for Austempered Ductile Iron Castings
A898/A898M - Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899 - Standard Specification for Steel Wire, Epoxy-Coated
A900 - Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901 - Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902 - Standard Terminology Relating to Metallic Coated Steel Products
A903/A903M - Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904 - Standard Specification for 50 Nickel M-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
A905 - Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M - Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A907/A907M - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality
A908 - Standard Specification for Stainless Steel Needle Tubing
A909 - Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M - Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M - Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A912 - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A914/A914M - Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M - Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918 - Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922 - Standard Specification for Silicon Metal
A923 - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
A924/A924M - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925 - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A926 - Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A927/A927M - Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M - Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M - Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930 - Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931 - Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A933/A933M - Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A934/A934M - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A935/A935M - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled
A936/A936M - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability
A937 - Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938 - Standard Test Method for Torsion Testing of Wire
A939 - Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940 - Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941 - Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942 - Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
A943/A943M - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944 - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M - Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A946 - Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A947M - Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M - Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951 - Standard Specification for Masonry Joint Reinforcement
A952/A952M - Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A953 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
A954 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A956 - Standard Test Method for Equotip Hardness Testing of Steel Products
A957 - Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958 - Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961 - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M - Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for use at Any Temperature from Cryogenic to the Creep Range
A963/A963M - Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled
A964/A964M - Standard Specification for Corrugated Steel Box Culverts
A965/A965M - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M - Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967 - Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968 - Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A969/A969M - Standard Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled
A970/A970M - Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement
A971 - Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M - Standard Specification for Grade 100 Alloy Steel Chain
A974 - Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975 - Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976 - Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A977 - Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M - Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M - Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980 - Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981 - Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A982 - Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M - Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A984/A984M - Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A985 - Standard Specification for Steel Investment Casting General Requirements, for Pressure-Containing Parts
A986/A986M - Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987 - Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
A988 - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989 - Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990 - Standard Specification for Chastings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled fo Pressur Retaining Parts for Corrosion Service
A991/A991M - Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M - Standard Specification for Steel for Structural Shapes For Use in Building Framing
A993 - Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
A994 - Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995 - Standard Specification for Casting, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A997 - Standard Practice for Investment Castings, Surfce Acceptance Standards, Visual Examination
A998/A998M - Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M - Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1000 - Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001 - Standard Specification for High Strength Steel Castings in Heavy Sections
B1 - Standard Specification for Hard-Drawn Copper Wire
B2 - Standard Specification for Medium-Hard-Drawn Copper Wire
B3 - Standard Specification for Soft or Annealed Copper Wire
B5 - Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B6 - Standard Specification for Zinc
B8 - Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9 - Standard Specification for Bronze Trolley Wire
B16M - Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric]
B16 - Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19 - Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks)
B21M - Standard Specification for Naval Brass Rod, Bar, and Shapes [Metric]
B21 - Standard Specification for Naval Brass Rod, Bar, and Shapes
B22 - Standard Specification for Bronze Castings for Bridges and Turntables
B23 - Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
B26/B26M - Standard Specification for Aluminum-Alloy Sand Castings
B29 - Standard Specification for Refined Lead
B30 - Standard Specification for Copper-Base Alloys in Ingot Form
B32 - Standard Specification for Solder Metal
B33 - Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M - Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37 - Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B39 - Standard Specification for Nickel
B42 - Standard Specification for Seamless Copper Pipe, Standard Sizes
B43 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B47 - Standard Specification for Copper Trolley Wire
B48 - Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49 - Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
B61 - Standard Specification for Steam or Valve Bronze Castings
B62 - Standard Specification for Composition Bronze or Ounce Metal Castings
B63 - Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66 - Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67 - Standard Specification for Car and Tender Journal Bearings, Lined
B68M - Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
B68 - Standard Specification for Seamless Copper Tube, Bright Annealed
B69 - Standard Specification for Rolled Zinc
B70 - Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B75M - Standard Specification for Seamless Copper Tube [Metric]
B75 - Standard Specification for Seamless Copper Tube
B76 - Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B77 - Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78 - Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80 - Standard Specification for Magnesium-Alloy Sand Castings
B84 - Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85 - Standard Specification for Aluminum-Alloy Die Castings
B86 - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88M - Standard Specification for Seamless Copper Water Tube [Metric]
B88 - Standard Specification for Seamless Copper Water Tube
B90/B90M - Standard Specification for Magnesium-Alloy Sheet and Plate
B91 - Standard Specification for Magnesium-Alloy Forgings
B92/B92M - Standard Specification for Magnesium Ingot and Stick For Remelting
B93/B93M - Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B94 - Standard Specification for Magnesium-Alloy Die Castings
B96/B96M - Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B98/B98M - Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes
B99/B99M - Standard Specification for Copper-Silicon Alloy Wire for General Applications
B100 - Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101 - Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B102 - Standard Specification for Lead- and Tin-Alloy Die Castings
B103/B103M - Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105 - Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106 - Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M - Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire
B108 - Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111M - Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]
B111 - Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B114 - Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115 - Standard Specification for Electrolytic Cathode Copper
B116 - Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
B117 - Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M - Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M - Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124M - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes [Metric]
B124 - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127 - Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129 - Standard Specification for Cartridge Brass Cartridge Case Cups
B130 - Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131 - Standard Specification for Copper Alloy Bullet Jacket Cups
B134 - Standard Specification for Brass Wire
B135M - Standard Specification for Seamless Brass Tube [Metric]
B135 - Standard Specification for Seamless Brass Tube
B136 - Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137 - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138M - Standard Specification for Manganese Bronze Rod, Bar and Shapes [Metric]
B138 - Standard Specification for Manganese Bronze Rod, Bar and Shapes
B139M - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes [Metric]
B139 - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M - Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148 - Standard Specification for Aluminum-Bronze Sand Castings
B150M - Standard Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric]
B150 - Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151M - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar [Metric]
B151 - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152M - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar [Metric]
B152 - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153 - Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154 - Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
B159M - Standard Specification for Phosphor Bronze Wire [Metric]
B159 - Standard Specification for Phosphor Bronze Wire
B160 - Standard Specification for Nickel Rod and Bar
B161 - Standard Specification for Nickel Seamless Pipe and Tube
B162 - Standard Specification for Nickel Plate, Sheet, and Strip
B163 - Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164 - Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165 - Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B166 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
B167 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045)* Seamless Pipe and Tube
B168 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
B169M - Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric]
B169 - Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170 - Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes
B171 - Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174 - Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176 - Standard Specification for Copper-Alloy Die Castings
B177 - Standard Guide for Chromium Electroplating on Steel for Engineering Use
B179 - Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183 - Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187M - Standard Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric]
B187 - Standard Specification for Copper Bar, Bus Bar, Rod and Shapes
B188 - Standard Specification for Seamless Copper Bus Pipe and Tube
B189 - Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B193 - Standard Test Method for Resistivity of Electrical Conductor Materials
B194 - Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196M - Standard Specification for Copper-Beryllium Alloy Rod and Bar [Metric]
B196 - Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M - Standard Specification for Copper-Beryllium Alloy Wire
B199 - Standard Specification for Magnesium-Alloy Permanent Mold Castings
B200 - Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
B201 - Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208 - Standard Practice for Preparing Tension Test Specimens for Copper-Base Alloys for Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209M - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
B209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B210M - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B210 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B211M - Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
B211 - Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
B212 - Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B213 - Standard Test Method for Flow Rate of Metal Powders
B214 - Standard Test Method for Sieve Analysis of Metal Powders
B215 - Standard Practices for Sampling Finished Lots of Metal Powders
B216 - Standard Specification for Tough-Pitch Fire-Refined Copper Refinery Shapes
B221M - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B223 - Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224 - Standard Classification of Coppers
B226 - Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227 - Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228 - Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229 - Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B230/B230M - Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B231/B231M - Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233 - Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234M - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B234 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B236M - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B236 - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B237 - Standard Specification for Refined Antimony
B240 - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242 - Standard Practice for Preparation of High-Carbon Steel For Electroplating
B243 - Standard Terminology of Powder Metallurgy
B244 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246 - Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247M - Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B247 - Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B248M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip and Rolled Bar [Metric]
B248 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B249M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings [Metric]
B249 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250M - Standard Specification for General Requirements for Wrought Copper Alloy Wire [Metric]
B250 - Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251M - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B251 - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B252 - Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253 - Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254 - Standard Practice for Preparation of and Electroplating on Stainless Steel
B255 - Standard Specification for Sintered Bronze Structural Parts
B258 - Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B263 - Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267 - Standard Specification for Wire for Use In Wire-Wound Resistors
B271 - Standard Specification for Copper-Base Alloy Centrifugal Castings
B272 - Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B275 - Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B276 - Standard Test Method for Apparent Porosity in Cemented Carbides
B277 - Standard Test Method for Hardness of Electrical Contact Materials
B279 - Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281 - Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B282 - Standard Specification for Sintered Brass Structural Parts
B283 - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286 - Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294 - Standard Test Method for Hardness Testing of Cemented Carbides
B296 - Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298 - Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299 - Standard Specification for Titanium Sponge
B301/B301M - Standard Specification for Free-Cutting Copper Rod and Bar
B301M - Standard Specification for Free-Cutting Copper Rod and Bar [Metric]
B302 - Standard Specification for Threadless Copper Pipe, Standard Sizes
B308/B308M - Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311 - Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
B312 - Standard Test Method for Green Strength for Compacted Metal Powder Specimens
B313/B313M - Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315 - Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M - Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317 - Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)
B319 - Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B320 - Standard Practice for Preparation of Iron Castings for Electroplating
B322 - Standard Practice for Cleaning Metals Prior to Electroplating
B324 - Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327 - Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B328 - Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
B329 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
B330 - Standard Test Method for Average Particle Size Fisher Number of Metal Powders of Refractory Metals and Their Related Compounds by the Fisher Sub-Sieve Sizer
B331 - Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333 - Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335 - Standard Specification for Nickel-Molybdenum Alloy Rod
B338 - Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B339 - Standard Specification for Pig Tin
B341/B341M - Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B343 - Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344 - Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345 - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B348 - Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M - Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M - Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351 - Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352 - Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353 - Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354 - Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355 - Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359M - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric]
B359 - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B360 - Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361 - Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362 - Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363 - Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364 - Standard Specification for Tantalum and Tantalum Alloy Ingots
B365 - Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367 - Standard Specification for Titanium and Titanium Alloy Castings
B368 - Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369 - Standard Specification for Copper-Nickel Alloy Castings
B370 - Standard Specification for Copper Sheet and Strip for Building Construction
B371 - Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372 - Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373 - Standard Specification for Aluminum Foil for Capacitors
B374 - Standard Terminology Relating to Electroplating
B379 - Standard Specification for Phosphorized Coppers-Refinery Shapes
B380 - Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
B381 - Standard Specification for Titanium and Titanium Alloy Forgings
B386 - Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387 - Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388 - Standard Specification for Thermostat Metal Sheet and Strip
B389 - Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B390 - Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
B391 - Standard Specification for Niobium and Niobium Alloy Ingots
B392 - Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393 - Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394 - Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395M - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric]
B395 - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B396 - Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes
B397 - Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors
B398/B398M - Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M - Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403 - Standard Specification for Magnesium-Alloy Investment Castings
B404 - Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
B406 - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407 - Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408 - Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409 - Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411 - Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B412 - Standard Specification for Copper-Nickel-Silicon Alloy Wire
B413 - Standard Specification for Refined Silver
B415 - Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416 - Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417 - Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders
B418 - Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B422 - Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
B424 - Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
B425 - Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
B427 - Standard Specification for Gear Bronze Alloy Castings
B428 - Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429 - Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B430 - Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
B432 - Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003)* Plate, Sheet, and Strip
B435 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438/B438M - Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)
B439 - Standard Specification for Iron-Base Sintered Bearings (Oil-Impregnated)
B440 - Standard Specification for Cadmium
B441 - Standard Specification for Copper-Cobalt-Beryllium (UNS No. C17500) and Copper-Nickel-Beryllium (UNS No. C17510) Rod and Bar
B443 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Plate, Sheet, and Strip
B444 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625)* Pipe and Tube
B446 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Rod and Bar
B447 - Standard Specification for Welded Copper Tube
B449 - Standard Specification for Chromates on Aluminum
B452 - Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453M - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod [Metric]
B453 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod
B455 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B457 - Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B458 - Standard Specification for Sintered Nickel Silver Structural Parts
B462 - Standard Specification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, UNS N08367, and UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
B463 - Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
B464 - Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
B465 - Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M - Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467 - Standard Specification for Welded Copper-Nickel Pipe
B468 - Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
B469 - Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications
B470 - Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472 - Standard Specification for UNS N08020, UNS N08026, UNS N08024, UNS N08926, UNS N08367, and UNS R20033 Nickel Alloy Billets and Bars for Reforging
B473 - Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474 - Standard Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipe
B475 - Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476 - Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477 - Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478 - Standard Test Method for Cross Curvature of Thermostat Metals
B479 - Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B480 - Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481 - Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482 - Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B483 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
B487 - Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
B488 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B490 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M - Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493 - Standard Specification for Zirconium and Zirconium Alloy Forgings
B495 - Standard Specification for Zirconium and Zirconium Alloy Ingots
B496 - Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497 - Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M - Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B499 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Nonmagnetic Coatings on Magnetic Basis Metals
B500/B500M - Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
B501 - Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502 - Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
B504 - Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B505 - Standard Specification for Copper-Base Alloy Continuous Castings
B507 - Standard Practice for Design of Articles To Be Electroplated on Racks
B508 - Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B511 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512 - Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514 - Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515 - Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
B516 - Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
B517 - Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B520 - Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521 - Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522 - Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527 - Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
B528 - Standard Test Method for Transverse Rupture Strength of Sintered Metal Powder Specimens
B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B531 - Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
B532 - Standard Specification for Appearance of Electroplated Plastic Surfaces
B533 - Standard Test Method for Peel Strength of Metal Electroplated Plastics
B534 - Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
B537 - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539 - Standard Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts)
B540 - Standard Specification for Palladium Electrical Contact Alloy
B541 - Standard Specification for Gold Electrical Contact Alloy
B542 - Standard Terminology Relating to Electrical Contacts and Their Use
B543M - Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube [Metric]
B543 - Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545 - Standard Specification for Electrodeposited Coatings of Tin
B546 - Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332),Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
B547/B547M - Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548 - Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
B550/B550M - Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M - Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552 - Standard Specification for Seamless and Welded Copper/Nickel Tubes For Water Desalting Plants
B555 - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
B556 - Standard Guide for Measurement of Thin Chromium Coatings by the Spot Test
B557M - Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
B557 - Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B558 - Standard Practice for Preparation of Nickel Alloys for Electroplating
B559 - Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560 - Standard Specification for Modern Pewter Alloys
B561 - Standard Specification for Refined Platinum
B562 - Standard Specification for Refined Gold
B563 - Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564 - Standard Specification for Nickel Alloy Forgings
B565 - Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566 - Standard Specification for Copper-Clad Aluminum Wire
B567 - Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568 - Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569 - Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570 - Standard Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
B571 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B572 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003)* Rod
B574 - Specification for Low-Carbon Nickel-Molybdenum-Chromium,Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B575 - Spec for Low-Carbon Nickel-Molydbdenum-Chromium,Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,Low-Carbon Nickel-Chromium-Molybdenum-Tantalum,Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate,Sheet and Strip
B576 - Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577 - Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B578 - Standard Test Method for Microhardness of Electroplated Coatings
B579 - Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580 - Standard Specification for Anodic Oxide Coatings on Aluminum
B581 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584 - Standard Specification for Copper Alloy Sand Castings for General Applications
B587 - Standard Specification for Welded Brass Tube
B588 - Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
B589 - Standard Specification for Refined Palladium
B591 - Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592 - Standard Specification for Copper-Zinc-Aluminum-Cobalt Plate, Sheet, Strip, and Rolled Bar
B593 - Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594 - Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B595 - Standard Specification for Sintered Aluminum Structural Parts
B596 - Standard Specification for Gold-Copper Alloy Electrical Contact Material
B597 - Standard Practice for Heat Treatment of Aluminum Alloys
B598 - Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
B600 - Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601 - Standard Practice for Temper Designations for Copper and Copper Alloys-Wrought and Cast
B602 - Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603 - Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B604 - Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
B605 - Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606 - Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B607 - Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608 - Standard Specification for Welded Copper-Alloy Pipe
B609/B609M - Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B610 - Standard Test Method for Measuring Dimensional Change of Metal Powder Specimens Due to Sintering
B611 - Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
B612 - Standard Specification for Iron Bronze Sintered Bearings (Oil-Impregnated)
B613 - Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615 - Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616 - Standard Specification for Refined Rhodium
B617 - Standard Specification for Coin Silver Electrical Contact Alloy
B618 - Standard Specification for Aluminum-Alloy Investment Castings
B619 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620 - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621 - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622 - Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624 - Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625 - Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip
B626 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628 - Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629 - Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630 - Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631 - Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M - Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634 - Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635 - Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636 - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
B637 - Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
B639 - Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNSR30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640 - Standard Specification for Welded Copper and Copper Alloy Tube for Air Conditioning and Refrigeration Service
B643 - Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644 - Standard Specification for Copper Alloy Addition Agents
B645 - Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646 - Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647 - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648 - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649 - Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
B650 - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
B651 - Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
B652/B652M - Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654 - Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M - Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
B656 - Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use
B657 - Standard Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
B658/B658M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659 - Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660 - Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661 - Standard Practice for Heat Treatment of Magnesium Alloys
B662 - Standard Specification for Silver-Molybdenum Electrical Contact Material
B663 - Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
B664 - Standard Specification for 80% Silver-20% Graphite Sliding Contact Material
B665 - Standard Practice for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M - Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667 - Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668 - Standard Specification for UNS N08028 Seamless Tubes
B670 - Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671 - Standard Specification for Refined Iridium
B672 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673 - Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Welded Pipe
B674 - Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Welded Tube
B675 - Standard Specification for UNS N08367 Welded Pipe
B676 - Standard Specification for UNS N08367 Welded Tube
B677 - Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube
B678 - Standard Test Method for TestMethodfor Solderability of Metallic-Coated Products
B679 - Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680 - Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B681 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope
B682 - Standard Specification for Standard Metric Sizes of Electrical Conductors
B683 - Standard Specification for Pure Palladium Electrical Contact Material
B684 - Standard Specification for Platinum-Iridium Electrical Contact Materials
B685 - Standard Specification for Palladium-Copper Electrical Contact Material
B686 - Standard Specification for Aluminum Alloy Castings, High-Strength
B687 - Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688 - Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
B689 - Standard Specification for Electroplated Engineering Nickel Coatings
B690 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
B691 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B692 - Standard Specification for 75% Silver-25% Graphite Sliding Contact Material
B693 - StandardSpecificationfor Silver-Nickel Electrical Contact Materials
B694 - Standard Specification for Copper, Copper-Alloy, and Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696 - Standard Specification for Coatings of Cadmium Mechanically Deposited
B697 - Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B698 - Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
B699 - Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B700 - Standard Test Method for Electrodeposited Coatings of Silver for Engineering Use
B701 - Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B702 - Standard Specification for Copper-Tungsten Electrical Contact Material
B703 - Standard Test Method for Apparent Density of Powders Using Arnold Meter
B704 - Standard Specification for Welded UNS N06625 and UNS N08825 Alloy Tubes
B705 - Standard Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe
B708 - Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
B710 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711 - Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B712 - Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
B713 - Standard Terminology Relating to Superconductors
B714 - Standard Test Method for D-C Critical Current of Composite Superconductors
B715 - Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
B717 - Standard Specification for Refined Ruthenium
B718 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
B719 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
B721 - Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts
B722 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
B723 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
B724 - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage Portable Non-Caliper-Type Instrument
B725 - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
B726 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
B727 - Standard Practice for Preparation of Plastics Materials for Electroplating
B729 - Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
B730 - Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
B731 - Standard Specification for 60% Palladium-40% Silver Electrical Contact Material
B733 - Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B734 - Standard Specification for Electrodeposited Copper for Engineering Uses
B735 - Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B736 - Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
B737 - Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738 - Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B739 - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740 - Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B741 - Standard Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography
B742 - Standard Specification for Fine Silver Electrical Contact Fabricated Material
B743 - Standard Specification for Seamless Copper Tube in Coils
B744/B744M - Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B747 - Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B748 - Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
B749 - Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B750 - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy in Ingot Form for Hot-Dip Coatings
B751 - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752 - Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B753 - Standard Specification for Thermostat Component Alloys
B754 - Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
B755 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
B756 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
B757 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
B758 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
B759 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
B760 - Standard Specification for Tungsten Plate, Sheet, and Foil
B761 - Standard Test Method for Particle Size Distribution of Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
B762 - Standard Method of Variables Sampling of Metallic and Inorganic Coatings
B763 - Standard Specification for Copper Alloy Sand Castings for Valve Application
B764 - Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
B765 - Standard Guide for Selection of Porosity Tests for Electrodeposits and Related Metallic Coatings
B766 - Standard Specification for Electrodeposited Coatings of Cadmium
B767 - Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
B768 - Standard Specification for Copper-Cobalt-Beryllium Alloy Strip and Sheet
B769 - Standard Test Method for Shear Testing of Aluminum Alloys
B770 - Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771 - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772 - Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
B773 - Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
B774 - Standard Specification for Low Melting Point Alloys
B775 - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B776 - Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777 - Standard Specification for Tungsten Base, High-Density Metal
B778 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B779 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B780 - Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
B781 - Standard Guide for Silver-Cadmium Oxide Contact Material
B782 - Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)
B784 - Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
B786 - Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum 1350 Conductors for Subsequent Insulation
B787 - Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M - Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B789/B789M - Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B790/B790M - Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B792 - Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B793 - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B794 - Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
B795 - Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
B796 - Standard Test Method for Nonmetallic Inclusion Level of Powder Forged (P/F) Steel Parts
B797 - Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
B798 - Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
B799 - Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
B800 - Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
B801 - Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B802/B802M - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B803 - Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B804 - Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
B805 - Standard Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776, and N09777, Bar and Wire
B806 - Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B807 - Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808 - Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
B809 - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur")
B810 - Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
B811 - Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812 - Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B813 - Standard Specification for Liquid and Paste Fluxes for Soldering Applications of Copper and Copper Alloy Tube
B814 - Standard Specification for :Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
B815 - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
B816 - Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
B817 - Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
B818 - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
B819 - Standard Specification for Seamless Copper Tube for Medical Gas Systems
B820 - Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
B821 - Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B823 - Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
B824 - Standard Specification for General Requirements for Copper Alloy Castings
B825 - Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826 - Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827 - Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B829 - Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B830 - Standard Specification for Uniform Test Methods and Frequency
B831 - Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B832 - Standard Guide for Electroforming with Nickel and Copper
B833 - Standard Specification for Zinc Wire for Thermal Spraying (Metallizing)
B834 - Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
B835 - Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836 - Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837 - Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
B839 - Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method
B840 - Standard Specification for Electro-deposited Coatings for Zinc Cobalt Alloy Deposits
B841 - Standard Specification for Electro-deposited Coatings for Zinc Nickel Alloy Deposits
B842 - Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
B843 - Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B844 - Standard Guide for Silver-Tin Oxide Contact Material
B845 - Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846 - Standard Terminology for Copper and Copper Alloys
B848 - Standard Specification for Powder Forged (P/F) Ferrous Structural Parts
B849 - Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B850 - Standard Guide for Post-Coating Treatments Steel for Reducing the Risk of Hydrogen Embrittlement
B851 - Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852 - Standard Specification for Zinc Alloys (CGG) for Continuous Hot-Dip Galvanizing of Sheet Steel
B853 - Standard Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
B854 - Standard Guide for Measuring Electrical Contact Intermittences
B855 - Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
B856 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS/TW)
B857 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B858M - Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test
B859 - Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
B860 - Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861 - Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B862 - Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863 - Standard Specification for Titanium and Titanium Alloy Wire
B864/B864M - Standard Specification for Corrugated Aluminum Box Culverts
B865 - Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
B866 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
B868 - Standard Practice for Contact Performance Classification of Electrical Connection Systems
B869 - Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870 - Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys C17500 and C17510
B871 - Standard Test Method for Tear Testing of Aluminum Alloy Products
B872 - Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip
B873 - Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B876 - Standard Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application
B877 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
B878 - Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879 - Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
B880 - Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys
B881 - Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
B882 - Specification for Pre-Patinated Copper for Architectural Applications
B883 - Standard Specification for Metal Injection Molding (MIM), Ferrous Structural Parts
B884 - Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
B885 - Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886 - Standard Test Methods for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888 - Standard Specification for Copper Alloy Strip for Use in the Manufacture of Electrical Connectors or Spring Contacts
B889 - Standard Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes
B890 - Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891 - Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B892 - Standard Specification for Zinc-Copper-Aluminum in Ingot Form for Die Castings
B893 - Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894 - Standard Specification for Zinc-Copper-Aluminum Alloy Die Castings
B895 - Standard Test Methods for Evaluating the Corrosion Resistance of Powder Metallurgy (P/M) Stainless Steel Parts/Specimens by Immersion in a Sodium Chloride Solution
B896 - Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Ingot
B898 - Standard Specification for Reactive and Refractory Metal Clad Plate
B899 - Standard Terminology Relating to Non-ferrous Metals and Alloys
C4 - Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5 - Standard Specification for Quicklime for Structural Purposes
C11 - Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C12 - Standard Practice for Installing Vitrified Clay Pipe Lines
C14M - Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
C14 - Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe
C16 - Standard Test Method for Load Testing Refractory Brick at High Temperatures
C20 - Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M - Standard Specification for Gypsum
C24 - Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C25 - Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27 - Standard Classification of Fireclay and High-Alumina Refractory Brick
C28 - Standard Specification for Gypsum Plasters
C29/C29M - Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
C31/C31M - Standard Practice for Making and Curing Concrete Test Specimens in the Field
C32 - Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33 - Standard Specification for Concrete Aggregates
C34 - Standard Specification for Structural Clay Load-Bearing Wall Tile
C35 - Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C36/C36M - Standard Specification for Gypsum Wallboard
C37 - Standard Specification for Gypsum Lath
C39/C39M - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40 - Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C43 - Standard Terminology of Structural Clay Products
C50 - Standard Practice for Sampling, Inspection, Packing, and Marking of Lime and Limestone Products
C51 - Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C55 - Standard Specification for Concrete Brick
C56 - Standard Specification for Structural Clay Non-Load-Bearing Tile
C59 - Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61 - Standard Specification for Gypsum Keene's Cement
C62 - Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70 - Standard Test Method for Surface Moisture in Fine Aggregate
C71 - Standard Terminology Relating to Refractories
C73 - Standard Specification for Calcium Silicate Face Brick (Sand-Lime Brick)
C76M - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
C76 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C78 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C79/C79M - Standard Specification for Treated Core and Nontreated Core Gypsum Sheathing Board
C87 - Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88 - Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90 - Standard Specification for Loadbearing Concrete Masonry Units
C91 - Standard Specification for Masonry Cement
C92 - Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M - Standard Specification for Ready-Mixed Concrete
C97 - Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99 - Standard Test Method for Modulus of Rupture of Dimension Stone
C108 - Standard Symbols for Heat Transmission
C109/C109M - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C110 - Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113 - Standard Test Method for Reheat Change of Refractory Brick
C114 - Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115 - Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C117 - Standard Test Method for Materials Finer than 75-[mu]m (No. 200) Sieve in Mineral Aggregates by Washing
C118M - Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
C118 - Standard Specification for Concrete Pipe for Irrigation or Drainage
C119 - Standard Terminology Relating to Dimension Stone
C120 - Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
C121 - Standard Test Method for Water Absorption of Slate
C123 - Standard Test Method for Lightweight Particles in Aggregate
C125 - Standard Terminology Relating to Concrete and Concrete Aggregates
C126 - Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127 - Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate
C128 - Standard Test Method for Specific Gravity and Absorption of Fine Aggregate
C129 - Standard Specification for Nonloadbearing Concrete Masonry Units
C131 - Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133 - Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134 - Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135 - Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136 - Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138 - Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
C139 - Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140 - Standard Test Methods of Sampling and Testing Concrete Masonry Units and Related Units
C141 - Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
C142 - Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M - Standard Test Method for Slump of Hydraulic Cement Concrete
C144 - Standard Specification for Aggregate for Masonry Mortar
C146 - Standard Test Methods for Chemical Analysis of Glass Sand
C147 - Standard Test Methods for Internal Pressure Strength of Glass Containers
C148 - Standard Test Methods for Polariscopic Examination of Glass Containers
C149 - Standard Test Method for Thermal Shock Resistance of Glass Containers
C150 - Standard Specification for Portland Cement
C151 - Standard Test Method for Autoclave Expansion of Portland Cement
C155 - Standard Classification of Insulating Firebrick
C156 - Standard Test Method for Water Retention by Concrete Curing Materials
C157/C157M - Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
C158 - Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159 - Standard Specification for Vitrified Clay Filter Blocks
C162 - Standard Terminology of Glass and Glass Products
C163 - Standard Practice for Mixing Thermal Insulating Cement Samples
C165 - Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166 - Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167 - Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 - Standard Terminology Relating to Thermal Insulating Materials
C169 - Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C170 - Standard Test Method for Compressive Strength of Dimension Stone
C171 - Standard Specification for Sheet Materials for Curing Concrete
C172 - Standard Practice for Sampling Freshly Mixed Concrete
C173 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C174/C174M - Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177 - Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179 - Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181 - Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C182 - Standard Test Method for Thermal Conductivity of Insulating Firebrick
C183 - Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C184 - Standard Test Method for Fineness of Hydraulic Cement by the 150-[mu][mu][mu]m (No. 100) and 75-[mu][mu][mu]m (No. 200) Sieves
C185 - Standard Test Method for Air Content of Hydraulic Cement Mortar
C186 - Standard Test Method for Heat of Hydration of Hydraulic Cement
C187 - Standard Test Method for Normal Consistency of Hydraulic Cement
C188 - Standard Test Method for Density of Hydraulic Cement
C191 - Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C195 - Standard Specification for Mineral Fiber Thermal Insulating Cement
C196 - Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198 - Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199 - Standard Test Method for Pier Test for Refractory Mortars
C201 - Standard Test Method for Thermal Conductivity of Refractories
C202 - Standard Test Method for Thermal Conductivity of Refractory Brick
C203 - Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204 - Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
C206 - Standard Specification for Finishing Hydrated Lime
C207 - Standard Specification for Hydrated Lime for Masonry Purposes
C208 - Standard Specification for Cellulosic Fiber Insulating Board
C209 - Standard Test Methods for Cellulosic Fiber Insulating Board
C210 - Standard Test Method for Reheat Change of Insulating Firebrick
C212 - Standard Specification for Structural Clay Facing Tile
C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217 - Standard Test Method for Weather Resistance of Slate
C219 - Standard Terminology Relating to Hydraulic Cement
C220 - Standard Specification for Flat Asbestos-Cement Sheets
C221 - Standard Specification for Corrugated Asbestos-Cement Sheets
C222 - Standard Specification for Asbestos-Cement Roofing Shingles
C223 - Standard Specification for Asbestos-Cement Siding
C224 - Standard Practice for Sampling Glass Containers
C225 - Standard Test Methods for Resistance of Glass Containers to Chemical Attack
C226 - Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C227 - Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C230/C230 - Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C231 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232 - Standard Test Methods for Bleeding of Concrete
C233 - Standard Test Method for Air-Entraining Admixtures for Concrete
C234 - Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel
C236 - Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box
C240 - Standard Test Methods of Testing Cellular Glass Insulation Block
C241 - Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242 - Standard Terminology of Ceramic Whitewares and Related Products
C243 - Standard Test Method for Bleeding of Cement Pastes and Mortars
C260 - Standard Specification for Air-Entraining Admixtures for Concrete
C265 - Standard Test Method for Calcium Sulfate in Hydrated Portland Cement Mortar
C266 - Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267 - Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270 - Standard Specification for Mortar for Unit Masonry
C271 - Standard Test Method for Density of Sandwich Core Materials
C272 - Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C273 - Standard Test Method for Shear Properties of Sandwich Core Materials
C274 - Standard Terminology of Structural Sandwich Constructions
C279 - Standard Specification for Chemical-Resistant Masonry Units
C282 - Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
C283 - Standard Test Method for Resistance of Porcelain Enameled Utensils to Boiling Acid
C285 - Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C287 - Standard Specification for Chemical-Resistant Sulfur Mortar
C288 - Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C289 - Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294 - Standard Descriptive Nonmenclature for Constituents of Concrete Aggregates
C295 - Standard Guide for Petrographic Examination of Aggregates for Concrete
C296 - Standard Specification for Asbestos-Cement Pressure Pipe
C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C301 - Standard Test Methods for Vitrified Clay Pipe
C302 - Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303 - Standard Test Method for Dimensions and Density of Preformed Block-Type Thermal Insulation
C305 - Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307 - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 - Standard Test Methods for Working, Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309 - Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
C315 - Standard Specification for Clay Flue Linings
C317 - Standard Specification for Gypsum Concrete
C318/C318M - Standard Specification for Gypsum Formboard
C321 - Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C322 - Standard Practice for Sampling Ceramic Whiteware Clays
C323 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324 - Standard Test Method for Free Moisture in Ceramic Whiteware Clays
C325 - Standard Test Method for Wet Sieve Analysis of Ceramic Whiteware Clays
C326 - Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329 - Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C330 - Standard Specification for Lightweight Aggregates for Structural Concrete
C331 - Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332 - Standard Specification for Lightweight Aggregates for Insulating Concrete
C335 - Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation
C336 - Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338 - Standard Test Method for Softening Point of Glass
C341 - Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C342 - Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations
C346 - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
C348 - Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349 - Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C351 - Standard Test Method for Mean Specific Heat of Thermal Insulation
C353 - Standard Test Method for Adhesion of Dried Thermal Insulating or Finishing Cement
C354 - Standard Test Method for Compressive Strength of Thermal Insulating or Finishing Cement
C356 - Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357 - Standard Test Method for Bulk Density of Granular Refractory Materials
C359 - Standard Test Method for Early Stiffening of Portland Cement (Mortar Method)
C361M - Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
C363 - Standard Test Method for Delamination Strength of Honeycomb Core Materials
C364 - Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366 - Standard Test Methods for Measurement of Thickness of Sandwich Cores
C367 - Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C368 - Standard Test Method for Impact Resistance of Ceramic Tableware
C370 - Standard Test Method for Moisture Expansion of Fired Whiteware Products
C371 - Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
C373 - Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C374 - Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375 - Standard Classification of Water Used in Milling of Porcelain Enamel
C383 - Standard Test Method for Wet Adhesion of Thermal Insulating Cements to Metal
C384 - Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
C385 - Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C386 - Standard Practice for Use of Chemical-Resistant Sulfur Mortar
C387 - Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
C390 - Standard Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots
C393 - Standard Test Method for Flexural Properties of Sandwich Constructions
C394 - Standard Test Method for Shear Fatigue of Sandwich Core Materials
C395 - Standard Specification for Chemical-Resistant Resin Mortars
C397 - Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398 - Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399 - Standard Practice for Use of Chemical-Resistant Resin Mortars
C400 - Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401 - Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M - Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404 - Standard Specification for Aggregates for Masonry Grout
C405 - Standard Practice for Estimating Consistency of Wet-Mixed Thermal Insulating Cement
C406 - Standard Specification for Roofing Slate
C408 - Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C410 - Standard Specification for Industrial Floor Brick
C411 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412M - Standard Specification for Concrete Drain Tile [Metric]
C412 - Standard Specification for Concrete Drain Tile
C413 - Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings
C414 - Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416 - Standard Classification of Silica Refractory Brick
C417 - Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418 - Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C419 - Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421 - Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
C423 - Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C424 - Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C425 - Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C426 - Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428 - Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C429 - Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C430 - Standard Test Method for Fineness of Hydraulic Cement by the 45-[mu][mu][mu][mu]m (No. 325) Sieve
C435 - Standard Classification of Steel Pouring Pit Fireclay Refractories
C441 - Standard Test Method for Effectiveness of Mineral Admixtures or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C442/C442M - Standard Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board
C443M - Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets [Metric]
C443 - Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
C444M - Standard Specification for Perforated Concrete Pipe [Metric]
C444 - Standard Specification for Perforated Concrete Pipe
C446 - Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes
C447 - Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C448 - Standard Test Methods for Abrasion Resistance of Porcelain Enamels
C449/C449M - Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450 - Standard Practice for Prefabrication and Field Fabrication of Thermal Insulating Fitting Covers for NPS Piping, Vessel Lagging, and Dished Head Segments
C451 - Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452 - Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454 - Standard Practice for Disintegration of Carbon Refractories by Alkali
C455 - Standard Classification of Chrome Brick, Chrome-Magnesite Brick, Magnesite-Chrome Brick, and Magnesite Brick
C456 - Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C457 - Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458 - Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
C459 - Standard Test Methods for Asbestos-Cement Flat Products
C460 - Standard Terminology for Asbestos-Cement
C461 - Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C465 - Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C466 - Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467 - Standard Classification of Mullite Refractories
C469 - Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
C470/C470M - Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
C472 - Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C473 - Standard Test Methods for Physical Testing of Gypsum Panel Products
C474 - Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475 - Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476 - Standard Specification for Grout for Masonry
C478M - Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
C478 - Standard Specification for Precast Reinforced Concrete Manhole Sections
C479 - Standard Specification for Vitrified Clay Liner Plates
C480 - Standard Test Method for Flexure Creep of Sandwich Constructions
C481 - Standard Test Method for Laboratory Aging of Sandwich Constructions
C482 - Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement
C483 - Standard Test Method for Electrical Resistance of Conductive Ceramic Tile
C484 - Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485 - Standard Test Method for Measuring Warpage of Ceramic Tile
C488 - Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490 - Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492 - Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C493 - Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement
C494/C494M - Standard Specification for Chemical Admixtures for Concrete
C495 - Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496 - Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C497M - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C497 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C498 - Standard Specification for Perforated Clay Drain Tile
C499 - Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500 - Standard Test Methods for Asbestos-Cement Pipe
C501 - Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502 - Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503 - Standard Specification for Marble Dimension Stone (Exterior)
C505M - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
C505 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
C506M - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
C506 - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C507M - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
C507 - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C508 - Standard Specification for Asbestos-Cement Underdrain Pipe
C509 - Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 - Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511 - Standard Specification for Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512 - Standard Test Method for Creep of Concrete in Compression
C513 - Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
C514 - Standard Specification for Nails for the Application of Gypsum Board
C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings
C516 - Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520 - Standard Test Methods for Density of Granular Loose Fill Insulations
C522 - Standard Test Method for Airflow Resistance of Acoustical Materials
C530 - Standard Specification for Structural Clay Non-Load Bearing Screen Tile
C531 - Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533 - Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534 - Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535 - Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C536 - Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537 - Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538 - Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C541 - Standard Specification for Linings for Asbestos-Cement Pipe
C542 - Standard Specification for Lock-Strip Gaskets
C544 - Standard Test Method for Hydration of Magnesite or Periclase Grain
C545 - Standard Classification of Zircon Refractories
C547 - Standard Specification for Mineral Fiber Pipe Insulation
C549 - Standard Specification for Perlite Loose Fill Insulation
C550 - Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551 - Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552 - Standard Specification for Cellular Glass Thermal Insulation
C553 - Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C554 - Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C557 - Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C559 - Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C560 - Standard Test Methods for Chemical Analysis of Graphite
C561 - Standard Test Method for Ash in a Graphite Sample
C562 - Standard Test Method for Moisture in a Graphite Sample
C563 - Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
C564 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C565 - Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C566 - Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567 - Standard Test Method for Density Structural Lightweight Concrete
C568 - Standard Specification for Limestone Dimension Stone
C570 - Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction
C577 - Standard Test Method for Permeability of Refractories
C578 - Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579 - Standard Test Method for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
C580 - Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581 - Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582 - Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C583 - Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584 - Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C585 - Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
C586 - Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method)
C587 - Standard Specification for Gypsum Veneer Plaster
C588/C588M - Standard Specification for Gypsum Base for Veneer Plasters
C591 - Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592 - Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593 - Standard Specification for Fly Ash and Other Pozzolans for Use With Lime
C595 - Standard Specification for Blended Hydraulic Cements
C596 - Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597 - Standard Test Method for Pulse Velocity Through Concrete
C598 - Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C599 - Standard Specification for Conical Process Glass Pipe and Fittings
C600 - Standard Test Method of Thermal Shock Test on Glass Pipe
C601 - Standard Test Method for Pressure Test on Glass Pipe
C602 - Standard Specification for Agricultural Liming Materials
C603 - Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604 - Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607 - Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C609 - Standard Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
C610 - Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C611 - Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C612 - Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C613/C613M - Standard Test Method for Consitituent Content of composite Prepreg by Soxhlet Extraction
C614 - Standard Test Method for Alkali Resistance of Porcelain Enamels
C615 - Standard Specification for Granite Dimension Stone
C616 - Standard Specification for Quartz-Based Dimension Stone
C617 - Standard Practice for Capping Cylindrical Concrete Specimens
C618 - Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
C621 - Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C622 - Standard Test Method for Corrosion Resistance of Refractories to Molten Glass Using the Basin Furnace
C623 - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C625 - Standard Practice for Reporting Irradiation Results on Graphite
C627 - Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629 - Standard Specification for Slate Dimension Stone
C630/C630M - Standard Specification for Water-Resistant Gypsum Backing Board
C631 - Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C632 - Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633 - Standard Test Method for Adhesion or Cohesive Strength of Flame-Sprayed Coatings
C634 - Standard Terminology Relating to Environmental Acoustics
C635 - Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637 - Standard Specification for SAggregates for Radiation-Shielding Concrete
C638 - Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639 - Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641 - Standard Test Method for Staining Materials in Lightweight Concrete Aggregates
C642 - Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
C645 - Standard Specification for Nonstructural Steel Framing Members
C647 - Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648 - Standard Test Method for Breaking Strength of Ceramic Tile
C650 - Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
C651 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652 - Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653 - Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654M - Standard Specification for Porous Concrete Pipe [Metric]
C654 - Standard Specification for Porous Concrete Pipe
C655M - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
C655 - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C656 - Standard Specification for Structural Insulating Board, Calcium Silicate
C657 - Standard Test Method for D-C Volume Resistivity of Glass
C658 - Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659 - Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C660 - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C661 - Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C662 - Standard Specification for Impervious Graphite Pipe and Threading
C663 - Standard Specification for Asbestos-Cement Storm Drain Pipe
C664 - Standard Test Methods for Thickness of Diffusion Coating
C665 - Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667 - Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C668 - Standard Specification for Asbestos-Cement Transmission Pipe
C669 - Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash
C670 - Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C671 - Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing
C672/C672M - Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673 - Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674 - Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675 - Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676 - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C679 - Standard Test Method for Tack-Free Time of Elastomeric Sealants
C680 - Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program
C681 - Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C682 - Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures
C684 - Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
C685 - Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing
C686 - Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688 - Standard Specification for Functional Additions for Use in Hydraulic Cements
C689 - Standard Test Method for Modulus of Rupture of Unfired Clays
C690 - Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
C692 - Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C693 - Standard Test Method for Density of Glass by Buoyancy
C694 - Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C695 - Standard Test Method for Compressive Strength of Carbon and Graphite
C696 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C697 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C698 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C700 - Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702 - Standard Practice for Reducing Samples of Aggregate to Testing Size
C703 - Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C704 - Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706 - Standard Specification for Limestone for Animal Feed Use
C709 - Standard Terminology Relating to Manufactured Carbon and Graphite
C711 - Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 - Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C713 - Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound
C714 - Standard Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
C715 - Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C716 - Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717 - Standard Terminology of Building Seals and Sealants
C718 - Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants
C719 - Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C721 - Standard Test Method for Average Particle Size of Alumina and Silica Powders by Air Permeability
C722 - Standard Specification for Chemical-Resistant Resin Monolithic Surfacings
C723 - Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C724 - Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C725 - Standard Specification for Semidense Mineral Fiber Siding
C726 - Standard Specification for Mineral Fiber Roof Insulation Board
C727 - Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728 - Standard Specification for Perlite Thermal Insulation Board
C729 - Standard Test Method for Density of Glass by the Sink-Float Comparator
C730 - Standard Test Method for Knoop Indentation Hardness of Glass
C731 - Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732 - Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C733 - Standard Test Method for Volume Shrinkage of Latex Sealants
C734 - Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C735 - Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C736 - Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737 - Standard Specification for Limestone for Dusting of Coal Mines
C738 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C739 - Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
C740 - Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C741 - Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound
C742 - Standard Test Method for Degree of Set for Wood Sash Glazing Compound
C743 - Standard Test Method for Continuity of Porcelain Enamel Coatings
C744 - Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C745 - Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter
C746 - Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C747 - Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C748 - Standard Test Method for Rockwell Hardness of Graphite Materials
C749 - Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
C750 - Standard Specification for Nuclear-Grade Boron Carbide Powder
C751 - Standard Specification for Nuclear-Grade Boron Carbide Pellets
C752 - Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C753 - Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C754 - Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755 - Standard Practice for Selection of Vapor Retarders for Thermal Insulation
C756 - Standard Test Method for Cleanability of Surface Finishes
C757 - Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C758 - Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759 - Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C760 - Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C761 - Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C764 - Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765 - Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767 - Standard Test Method for Thermal Conductivity of Carbon Refractories
C768 - Standard Practice for Drip Slag Testing Refractory Materials at High Temperature
C769 - Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
C770 - Standard Test Method for Measurement of Glass Stress-Optical Coefficient
C771 - Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772 - Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C773 - Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C774 - Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
C775 - Standard Method for Particle-Size Analysis of Whiteware Clays
C776 - Standard Specification for Sintered Uranium Dioxide Pellets
C777 - Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C778 - Standard Specification for Standard Sand
C779 - Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780 - Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C781 - Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors
C782 - Standard Test Method for Softness of Preformed Tape Sealants
C783 - Standard Practice for Core Sampling of Graphite Electrodes
C784 - Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C785 - Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
C786 - Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-[mu][mu][mu][mu]m (No. 50), 150-[mu][mu][mu][mu]m (No. 100), and 75-[mu][mu][mu][mu]m (No. 200) Sieves by Wet Methods
C787 - Standard Specification for Uranium Hexafluoride for Enrichment
C788 - Standard Specification for Nuclear-Grade Uranyl Nitrate Solution
C789M - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
C789 - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
C791 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C792 - Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 - Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
C794 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795 - Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796 - Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C797 - Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds
C799 - Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C800 - Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C801 - Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads
C802 - Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M - Standard Test Method for Penetration Resistance of Hardened Concrete
C805 - Standard Test Method for Rebound Number of Hardened Concrete
C806 - Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807 - Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C808 - Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C809 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
C810 - Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C811 - Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C813 - Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C816 - Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
C821 - Standard Specification for Lime for Use with Pozzolans
C822 - Standard Terminology Relating to Concrete Pipe and Related Products
C823 - Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C824 - Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
C825 - Standard Specification for Precast Concrete Barriers
C827 - Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures
C828 - Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C829 - Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830 - Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831 - Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832 - Standard Test Method of Measuring the Thermal Expansion and Creep of Refractories Under Load
C833 - Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
C834 - Standard Specification for Latex Sealants
C835 - Standard Test Method for Total Hemispherical Emittance of Surfaces From 20 to 1400°C
C836 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C837 - Standard Test Method for Methylene Blue Index of Clay
C838 - Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C839 - Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C840 - Standard Specification for Application and Finishing of Gypsum Board
C841 - Standard Specification for Installation of Interior Lathing and Furring
C842 - Standard Specification for Application of Interior Gypsum Plaster
C843 - Standard Specification for Application of Gypsum Veneer Plaster
C844 - Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845 - Standard Specification for Expansive Hydraulic Cement
C846 - Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847 - Standard Specification for Metal Lath
C848 - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
C849 - Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C850M - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]
C850 - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
C852 - Standard Guide for Design Criteria for Plutonium Gloveboxes
C856 - Standard Practice for Petrographic Examination of Hardened Concrete
C857 - Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858 - Standard Specification for Underground Precast Concrete Utility Structures
C859 - Standard Terminology Relating to Nuclear Materials
C860 - Standard Practices for Determining and Measuring Consistency of Refractory Concretes
C861 - Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862 - Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863 - Standard Practice for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864 - Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865 - Standard Practice for Firing Refractory Concrete Specimens
C866 - Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
C867 - Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C868 - Standard Test Method for Chemical Resistance of Protective Linings
C869 - Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870 - Standard Practice for Conditioning of Thermal Insulating Materials
C871 - Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C872 - Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C873 - Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874 - Standard Practice for Rotary Slag Testing of Refractory Materials
C875 - Standard Specification for Asbestos-Cement Conduit
C876 - Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
C877M - Standard Specification for External Sealing Bands for Noncircular Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
C877 - Standard Specification for External Sealing Bands for Noncircular Concrete Sewer, Storm Drain, and Culvert Pipe
C878 - Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879 - Standard Test Method for Release Papers Used With Preformed Tape Sealants
C880 - Standard Test Method for Flexural Strength of Dimension Stone
C881 - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882 - Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M - Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885 - Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C886 - Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C887 - Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C888 - Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C889 - Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C890 - Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891 - Standard Practice for Installation of Underground Precast Concrete Utility Structures
C892 - Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C895 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C896 - Standard Terminology Relating to Clay Products
C897 - Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
C899 - Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C900 - Standard Test Method for Pullout Strength of Hardened Concrete
C901 - Standard Specification for Prefabricated Masonry Panels
C902 - Standard Specification for Pedestrian and Light Traffic Paving Brick
C903 - Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
C904 - Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905 - Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C906 - Standard Test Method for T-Peel Strength of Hot Applied Sealants
C907 - Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 - Standard Test Method for Yield Strength of Preformed Tape Sealants
C909 - Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910 - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911 - Standard Specification for Quicklime, Hydrated Lime, and Limestone for Chemical Uses
C912 - Standard Practice for Designing a Process for Cleaning Technical Glasses
C913 - Standard Specification for Precast Concrete Water and Wastewater Structures
C914 - Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915 - Standard Specification for Precast Reinforced Concrete Crib Wall Members
C916 - Standard Specification for Adhesives for Duct Thermal Insulation
C917 - Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C918 - Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919 - Standard Practice for Use of Sealants in Acoustical Applications
C920 - Standard Specification for Elastomeric Joint Sealants
C921 - Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C922 - Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C923M - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric]
C923 - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals
C924M - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C924 - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C925 - Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C926 - Standard Specification for Application of Portland Cement-Based Plaster
C927 - Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C928 - Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929 - Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930 - Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C931/C931M - Standard Specification for Exterior Gypsum Soffit Board
C932 - Standard Specification for Surface-Applied Bonding Agents for Exterior Plastering
C933 - Standard Specification for Welded Wire Lath
C935 - Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936 - Standard Specification for Solid Concrete Interlocking Paving Units
C937 - Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938 - Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939 - Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940 - Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941 - Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942 - Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943 - Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944 - Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945 - Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946 - Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947 - Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948 - Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C949 - Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C950 - Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C952 - Standard Test Method for Bond Strength of Mortar to Masonry Units
C953 - Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954 - Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 - Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C956 - Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957 - Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C958 - Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C960/C960M - Standard Specification for Predecorated Gypsum Board
C961 - Standard Test Method for Lap Shear Strength of Hot-Applied Sealants
C963 - Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 - Standard Guide for Lock-Strip Gasket Glazing
C965 - Standard Practice for Measuring Viscosity of Glass Above the Softening Point
C966 - Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C967 - Standard Specification for Uranium Ore Concentrate
C968 - Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C969M - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C969 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C970 - Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
C972 - Standard Test Method for Compression-Recovery of Tape Sealant
C973 - Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974 - Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975 - Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C976 - Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box
C977 - Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C978 - Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C979 - Standard Specification for Pigments for Integrally Colored Concrete
C980 - Standard Specification for Industrial Chimney Lining Brick
C981 - Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C982 - Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
C985M - Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric]
C985 - Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C986 - Standard Guide for Developing Training Programs in the Nuclear Fuel Cycle
C987 - Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
C989 - Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
C990M - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C990 - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C991 - Standard Specification for Flexible Glass Fiber Insulation for Pre-Engineered Metal Buildings
C992 - Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C993 - Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C995 - Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
C996 - Standard Specification for Uranium Hexafluoride Enriched to Less Than 5% 235U1
C998 - Standard Practice for Sampling Surface Soil for Radionuclides
C999 - Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
C1000 - Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001 - Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1002 - Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases
C1005 - Standard Specification for Reference Masses and Devices for Determining Mass for Use in the Physical Testing of Hydraulic Cements
C1006 - Standard Test Method for Splitting Tensile Strength of Masonry Units
C1007 - Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1008 - Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel
C1009 - Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1010 - Standard Guide for Acceptance, Checkout, and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility
C1012 - Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014 - Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015 - Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016 - Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M - Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1018 - Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1019 - Standard Test Method for Sampling and Testing Grout
C1021 - Standard Practice for Laboratories Engaged in the Testing of Building Sealants
C1022 - Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1023 - Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1025 - Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1026 - Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
C1027 - Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1028 - Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1029 - Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1030 - Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031 - Standard Specification for Nuclear-Grade Aluminum Oxide Powder
C1032 - Standard Specification for Woven Wire Plaster Base
C1033 - Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
C1034 - Standard Test Method for Lead and Cadmium Extracted From Glazed Ceramic Cookware
C1035 - Standard Specification for Lead and Cadmium Extracted from Glazed Ceramic Cookware
C1036 - Standard Specification for Flat Glass
C1037 - Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C1038 - Standard Test Method for Expansion of Portland Cement Mortar Bars Stored in Water
C1039 - Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1040 - Standard Test Methods for Density of Unhardened and Hardened Concrete In Place By Nuclear Methods
C1041 - Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1042 - Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
C1043 - Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044 - Standard Practice for Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat Flux and Thermal Transmission Properties
C1045 - Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046 - Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1048 - Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass
C1049 - Standard Practice for Installation of Granular Loose-Fill Thermal Insulation
C1051 - Standard Specification for Sodium (Na) as a Coolant for Liquid Metal-Cooled Reactors
C1052 - Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1053 - Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1054 - Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055 - Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057 - Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058 - Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059 - Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060 - Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M - Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
C1065 - Standard Specification for Nuclear-Grade Zirconium Oxide Powder
C1066 - Standard Specification for Nuclear Grade Zirconium Oxide Pellets
C1067 - Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
C1068 - Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1069 - Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070 - Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1071 - Standard Specification for Thermal and Acoustical Insulation (Glass Fiber, Duct Lining Material)
C1072 - Standard Test Method for Measurement of Masonry Flexural Bond Strength
C1073 - Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
C1074 - Standard Practice for Estimating Concrete Strength by the Maturity Method
C1075 - Standard Practices for Sampling Uranium-Ore Concentrate
C1076 - Standard Specification for Nuclear Grade Hafnium Oxide Pellets
C1077 - Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
C1080 - Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081 - Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082 - Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1083 - Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084 - Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086 - Standard Specification for Glass Fiber Felt Thermal Insulation
C1087 - Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089 - Standard Specification for Spun Cast Prestressed Concrete Poles
C1090 - Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout
C1091 - Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
C1093 - Standard Practice for Accreditation of Testing Agencies for Unit Masonry
C1094 - Standard Guide for Flexible Removable Insulation Covers
C1096 - Standard Test Method for Determination of Wood Fiber in Asbestos Cement
C1097 - Standard Specification for Hydrated Lime for Use in Asphaltic-Concrete Mixtures
C1098 - Standard Specification for Nuclear-Grade Hafnium Oxide Powder
C1099 - Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1100 - Standard Test Method for Ribbon Thermal Shock Testing of Refractory Materials
C1101/C1101M - Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1102 - Standard Test Method for Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles
C1103M - Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C1103 - Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1104/C1104M - Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105 - Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106 - Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107 - Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1108 - Standard Test Method for Plutonium by Controlled-Potential Coulometry
C1109 - Standard Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
C1110 - Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
C1111 - Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1112 - Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
C1113 - Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115 - Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116 - Standard Specification for Fiber-Reinforced Concrete and Shotcrete
C1117 - Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance
C1118 - Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
C1119 - Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120 - Standard Test Method for Wash Test of Asbestos
C1121 - Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122 - Standard Test Method for Wet Volume of Asbestos
C1123 - Standard Test Method for Compressibility and Recovery of Asbestos
C1124 - Standard Test Method for Kerosene Retention of Asbestos
C1125 - Standard Test Method for Penetration Index of Asbestos
C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1128 - Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
C1129 - Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130 - Standard Practice for Calibrating Thin Heat Flux Transducers
C1131 - Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1132 - Standard Practice for Calibration of the Heat Flow Meter Apparatus
C1133 - Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1134 - Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135 - Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136 - Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1137 - Standard Test Method for Degradation of Fine Aggregate Due to Attrition
C1138 - Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1139 - Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1140 - Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141 - Standard Specification for Admixtures for Shotcrete
C1142 - Standard Specification for Extended Life Mortar for Unit Masonry
C1143 - Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium
C1144 - Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
C1145 - Standard Terminology of Advanced Ceramics
C1146 - Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147 - Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148 - Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1149 - Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1150 - Standard Test Method for The Break-Off Number of Concrete
C1151 - Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete
C1152 - Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153 - Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154 - Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155 - Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1156 - Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1157 - Standard Performance Specification for Hydraulic Cement
C1158 - Standard Practice for Use and Installation of Radiant Barrier Systems (RBS) in Building Construction
C1159 - Standard Specification for Sulfur Polymer Cement For Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160 - Standard Specification for Chemical Resistant Carbon Brick
C1161 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162 - Standard Test Method for Loose Density of Asbestos
C1163 - Standard Test Method for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1164 - Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1165 - Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H
C1166 - Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167 - Standard Specification for Clay Roof Tiles
C1168 - Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169 - Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1170 - Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171 - Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172 - Standard Specification for Laminated Architectural Flat Glass
C1173 - Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1174 - Standard Practice for Prediction of the Long-Term Behavior of Waste Package Materials Including Waste Forms Used in the Geologic Disposal of High-Level Nuclear Waste
C1175 - Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1176 - Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M - Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M - Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel
C1179 - Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
C1180 - Standard Terminology of Mortar and Grout for Unit Masonry
C1181 - Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1182 - Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1183 - Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184 - Standard Specification for Structural Silicone Sealants
C1185 - Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186 - Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
C1187 - Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C1188 - Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities1
C1189 - Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors1
C1190 - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193 - Standard Guide for Use of Joint Sealants
C1194 - Standard Test Method for Compressive Strength of Architectural Cast Stone
C1195 - Standard Test Method for Absorption of Architectural Cast Stone
C1196 - Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197 - Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1199 - Standard Test Method for Measuring the Steady State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201 - Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202 - Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
C1203 - Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1204 - Standard Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205 - Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1206 - Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
C1207 - Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1208/C1208M - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1209 - Standard Terminology of Concrete Masonry Units and Related Units
C1210 - Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1211 - Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212 - Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1213 - Standard Terminology Relating to Precast Concrete Products
C1214M - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric]
C1214 - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1215 - Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1216 - Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1217 - Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1218/C1218M - Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1219 - Standard Test Methods for Arsenic in Uranium Hexafluoride
C1220 - Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221 - Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1222 - Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223 - Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224 - Standard Specification for Reflective Insulation for Building Applications
C1225 - Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
C1226 - Standard Test Method for Soluble Chlorides in Asbestos
C1227 - Standard Specification for Precast Concrete Septic Tanks
C1228 - Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229 - Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC)(Wash-Out Test)
C1230 - Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231 - Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
C1232 - Standard Terminology of Masonry
C1233 - Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234 - Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1235 - Standard Test Method for Plutonium by Titanium(III)/Cerium(IV) Titration
C1236 - Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
C1237 - Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
C1238 - Standard Guide for Installation of Walk-Through Metal Detectors
C1239 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1240 - Standard Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
C1241 - Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242 - Standard Guide for Design, Selection, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems
C1243 - Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1244M - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test [Metric]
C1244 - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test
C1245 - Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
C1246 - Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 - Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 - Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249 - Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1250 - Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1251 - Standard Guide for Determination of Specific Surface Area of Advanced Ceramic Materials by Gas Adsorption
C1252 - Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253 - Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1254 - Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255 - Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1256 - Standard Practice for Interpreting Glass Fracture Surface Features
C1257 - Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1258 - Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260 - Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261 - Standard Specification for Firebox Brick for Residential Fireplaces
C1262 - Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units
C1263 - Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264 - Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
C1265 - Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266 - Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1267 - Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268 - Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
C1269 - Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270 - Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1271 - Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272 - Standard Specification for Heavy Vehicular Paving Brick
C1273 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274 - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
C1276 - Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
C1277 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M - Standard Specification for Fiber-Reinforced Gypsum Panels
C1279 - Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1280 - Standard Specification for Application of Gypsum Sheathing
C1281 - Standard Specification for Preformed Tape Sealants for Glazing Applications
C1282 - Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1283 - Standard Practice for Installing Clay Flue Lining
C1284 - Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285 - Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses: The Product Consistency Test (PCT)
C1286 - Standard Classification for Advanced Ceramics
C1287 - Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
C1288 - Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1289 - Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290 - Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291 - Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292 - Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1293 - Standard Test Method for Concrete Aggregates by Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294 - Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1295 - Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
C1296 - Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
C1297 - Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1298 - Standard Guide for the Design and Construction of Brick Liners for Industrial Chimneys
C1299 - Standard Guide for Use in Selection of Liquid-Applied Sealants
C1300 - Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C1301 - Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1302 - Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303 - Standard Test Method for Estimating the Long-Term Change in the Thermal Resistance of Unfaced Rigid Closed Cell Plastic Foams by Slicing and Scaling Under Controlled Laboratory Conditions
C1304 - Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305 - Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306 - Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1307 - Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308 - Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309 - Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1310 - Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
C1311 - Standard Specification for Solvent Release Sealants
C1312 - Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313 - Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1314 - Standard Test Method for Constructing and Testing Masonry Prisms Used to Determine Compliance with Specified Compressive Strength of Masonry
C1315 - Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1316 - Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using a 252
C1317 - Standard Practice for Dissolution of Silicate or Acid-Resistant Matrix Samples
C1318 - Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319 - Standard Specification for Concrete Grid Paving Units
C1320 - Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321 - Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1322 - Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323 - Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1324 - Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325 - Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Interior Substrate Sheets
C1326 - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327 - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328 - Standard Specification for Plastic (Stucco) Cement
C1329 - Standard Specification for Mortar Cement
C1330 - Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1331 - Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332 - Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1334 - Standard Specification for Uranium Oxides with a 235
C1335 - Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1336 - Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337 - Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1338 - Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339 - Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1341 - Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1342 - Standard Practice for Flux Fusion Sample Distribution
C1343 - Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
C1344 - Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
C1345 - Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
C1346 - Standard Practice for Dissolution of UF6 from P-10 Tubes
C1347 - Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1348 - Standard Specification for Blended Uranium Oxides with a ²³⁵U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide
C1349 - Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1350M - Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa - s to Approximately 10¹³ Pa - s) by Beam Bending (Metric)
C1352 - Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353 - Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354 - Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M - Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1357 - Standard Test Method for Evaluating Masonry Bond Strength
C1358 - Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
C1359 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures
C1360 - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361 - Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1362 - Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
C1363 - Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
C1364 - Standard Specification for Architectural Cast Stone
C1365 - Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367 - Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
C1368 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1369 - Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370 - Standard Test Method for Determining the Acceptability of Aggregates for Use in Sulfur Polymer Cement Concrete
C1371 - Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372 - Standard Specification for Segmental Retaining Wall Units
C1373 - Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374 - Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375 - Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1376 - Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass
C1377 - Standard Test Method for Calibration of Surface/Stress Measuring Devices
C1378 - Standard Test Method for Determination of Resistance to Staining
C1379 - Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
C1380 - Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
C1381 - Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382 - Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383 - Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384 - Standard Specification for Modifiers for Masonry Mortars
C1385 - Standard Practice for Sampling Materials for Shotcrete
C1386 - Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
C1387 - Standard Guide for Determination of Technetium-99 in Soil
C1392 - Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1394 - Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1395/C1395M - Specification for Gypsum Ceiling Board
C1396/C1396M - Standard Specification for Gypsum Board
C1397 - Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
C1398 - Standard Test Method for Laboratory Determination of Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
C1399 - Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400 - Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401 - Standard Guide for Structural Sealant Glaze
C1402 - Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1403 - Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1404/C1404M - Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
C1405 - Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
C1407 - Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1408 - Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1409 - Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410 - Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1411 - Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413 - Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1414 - Standard Practice for the Separation of Americium from Plutonium by Ion Exchange
C1415 - Standard Test Method for ²³⁸Pu Isotopic Abundance by Alpha Spectrometry
C1416 - Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
C1417M - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1417 - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1419 - Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1420 - Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage
C1421 - Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
C1422 - Standard Specification for Chemically Strengthened Flat Glass
C1423 - Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1424 - Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures
C1425 - Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426 - Standard Practices for Verification and Calibration of Polarimeters
C1427 - Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1428 - Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
C1429 - Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1431 - Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432 - Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1433M - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
C1433 - Standard Specification for Precast Reinforced Concrete Box Sections for Culvers, Storm Drains, and Sewers
C1435 - Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436 - Standard Specification for Materials for Shotcrete
C1437 - Standard Test Method for Flow of Hydraulic Cement Mortar
C1438 - Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
C1439 - Standard Test Methods for Polymer-Modified Mortar and Concrete
C1440 - Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1441 - Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1442 - Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1443 - Standard Specification for Glasses, Portlight, Circular, Fully Tempered
C1444 - Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
DESIGNATIO - TITLE
D4 - Standard Test Method for Bitumen Content
D6 - Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
D8 - Standard Terminology Relating to Materials for Roads and Pavements
D9 - Standard Terminology Terms Relating to Wood
D12 - Standard Specification for Raw Tung Oil
D13 - Standard Specification for Spirits of Turpentine
D16 - Standard Terminology for Paint, Related Coatings, Materials, and Applications
D20 - Standard Test Method for Distillation of Road Tars
D25 - Standard Specification for Round Timber Piles
D29 - Standard Test Methods for Sampling and Testing Lac Resins
D34 - Standard Guide for Chemical Analysis of White Pigments
D36 - Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D38 - Standard Test Methods for Sampling Wood Preservatives Prior to Testing
D41 - Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
D43 - Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
D49 - Standard Test Methods of Chemical Analysis of Red Lead
D50 - Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
D56 - Standard Test Method for Flash Point by Tag Closed Tester
D61 - Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
D69 - Standard Test Methods for Friction Tapes
D70 - Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
D71 - Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D75 - Standard Practice for Sampling Aggregates
D76 - Standard Specification for Tensile Testing Machines for Textiles
D79 - Standard Specification for Zinc Oxide Pigments
D81 - Standard Specification for Basic Carbonate White Lead Pigment
D83 - Standard Specification for Red Lead Pigment
D85 - Standard Specification for Ochre Pigment
D86 - Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D87 - Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
D88 - Standard Test Method for Saybolt Viscosity
D91 - Standard Test Method for Precipitation Number of Lubricating Oils
D92 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup
D93 - Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
D94 - Standard Test Methods for Saponification Number of Petroleum Products
D95 - Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D96 - Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure)
D97 - Standard Test Method for Pour Point of Petroleum Products
D98 - Standard Specification for Calcium Chloride
D113 - Standard Test Method for Ductility of Bituminous Materials
D115 - Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
D116 - Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
D117 - Standard Guide for Sampling, Test Methods, Specifications, and Guide for Electrical Insulating Oils of Petroleum Origin
D120 - Standard Specification for Rubber Insulating Gloves
D121 - Standard Terminology of Coal and Coke
D123 - Standard Terminology Relating to Textiles
D124 - Standard Specification for Degummed Soybean Oil
D126 - Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
D127 - Standard Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
D128 - Standard Test Methods for Analysis of Lubricating Grease
D129 - Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
D130 - Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
D139 - Standard Test Method for Float Test for Bituminous Materials
D140 - Standard Practice for Sampling Bituminous Materials
D143 - Standard Method of Small Clear Specimens of Timber
D146 - Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
D149 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D150 - Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D153 - Standard Test Methods for Specific Gravity of Pigments
D154 - Standard Guide for Testing Varnishes
D156 - Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D167 - Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
D168 - Standard Test Method for Coke Residue of Creosote
D173 - Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
D176 - Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
D178 - Standard Specification for Rubber Insulating Matting
D185 - Standard Test Methods for Coarse Particles in Pigments, Pastes, and Paints
D187 - Standard Test Method for Burning Quality of Kerosine
D189 - Standard Test Method for Conradson Carbon Residue of Petroleum Products
D197 - Standard Test Method for Sampling and Fineness Test of Pulverized Coal
D198 - Standard Test Methods of Static Tests of Lumber in Structural Sizes
D202 - Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
D204 - Standard Test Methods for Sewing Threads
D207 - Standard Specification for Dry Bleached Lac
D209 - Standard Specification for Lamp black Pigment
D210 - Standard Specification for Bone Black Pigment
D211 - Standard Specification for Chrome Yellow and Chrome Orange Pigments
D215 - Standard Practice for the Chemical Analysis of White Linseed Oil Paints
D217 - Standard Test Methods for Cone Penetration of Lubricating Grease
D224 - Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt)
D225 - Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
D226 - Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
D227 - Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
D228 - Standard Test Methods for Asphalt Roll Roofing, Cap Sheets, and Shingles
D229 - Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
D233 - Standard Test Methods of Sampling and Testing Turpentine
D234 - Standard Specification for Raw Linseed Oil
D235 - Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D237 - Standard Specification for Orange Shellac and Other Lacs
D240 - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D242 - Standard Specification for Mineral Filler For Bituminous Paving Mixtures
D243 - Standard Test Method for Residue of Specified Penetration
D244 - Standard Test Methods for Emulsified Asphalts
D245 - Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
D246 - Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
D249 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules
D255 - Standard Method for Steam Distillation of Bituminous Protective Coatings
D256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D257 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials
D260 - Standard Specification for Boiled Linseed Oil
D261 - Standard Specification for Iron Blue Pigment
D262 - Standard Specification for Ultramarine Blue Pigment
D263 - Standard Specification for Chrome Oxide Green Pigment
D267 - Standard Specification for Gold Bronze Powder
D268 - Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
D269 - Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
D276 - Standard Test Methods for Identification of Fibers in Textiles
D279 - Standard Test Methods for Bleeding of Pigments
D280 - Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
D281 - Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
D283 - Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
D284 - Standard Test Methods for Chemical Analysis of Mercuric Oxide Pigment
D287 - Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
D290 - Standard Practice for Bituminous Mixing Plant Inspection
D291 - Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
D293 - Standard Test Method for the Sieve Analysis of Coke
D295 - Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
D297 - Standard Test Methods for Rubber Products-Chemical Analysis
D299 - Standard Specification for Asbestos Yarns
D301 - Standard Test Methods for Soluble Cellulose Nitrate
D304 - Standard Specification for n-Butyl Alcohol (Butanol)
D305 - Standard Test Method for Solvent-Extractable Material in Black Pigments
D312 - Standard Specification for Asphalt Used in Roofing
D315 - Standard Specification for Woven Asbestos Tape
D319 - Standard Specification for Amyl Alcohol (Synthetic)
D322 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
D323 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D329 - Standard Specification for Acetone
D330 - Standard Specification for 2-Butoxyethanol
D331 - Standard Specification for 2-Ethoxyethanol
D332 - Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
D333 - Standard Test Methods for Clear and Pigmented Lacquers
D341 - Standard Viscosity-Temperature Charts for Liquid Petroleum Products
D344 - Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
D345 - Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
D346 - Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
D347 - Standard Tables for Volume and Specific Gravity Correction Tables for Creosote, Creosote-coal Tar Solution and Coal Tar
D348 - Standard Test Methods for Rigid Tubes Used for Electrical Insulation
D349 - Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
D350 - Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
D351 - Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
D352 - Standard Test Methods for Pasted Mica Used in Electrical Insulation
D358 - Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
D360 - Standard Specification for Shellac Varnishes
D363 - Standard Specification for Tricresyl Phosphate
D365 - Standard Test Methods for Soluble Nitrocellulose Base Solutions
D367 - Standard Test Method for Xylene-Insoluble Matter in Creosote
D368 - Standard Test Method for Specific Gravity of Creosote and Oil-Type Preservatives
D369 - Standard Test Method for Specific Gravity of Creosote Fractions and Residue
D370 - Standard Test Method for Dehydration of Oil-Type Preservatives
D371 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage
D372 - Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation
D374M - Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
D374 - Standard Test Methods for Thickness of Solid Electrical Insulation
D375 - Standard Specification for Asbestos Roving
D378 - Standard Test Methods for Rubber Belting, Flat Type
D380 - Standard Test Methods for Rubber Hose
D381 - Standard Test Method for Gum Content in Fuels by Jet Evaporation
D387 - Standard Test Method for Color and Strength of Color Pigments with a Mechanical Muller
D388 - Standard Classification of Coals by Rank
D390 - Standard Specification for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers for Marine, Land, and Freshwater Use
D391 - Standard Specification for Creosote-Coal Tar Solution
D395 - Standard Test Methods for Rubber Property-Compression Set
D396 - Standard Specification for Fuel Oils
D402 - Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
D409 - Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
D411 - Standard Test Methods for Shellac Used for Electrical Insulation
D412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension
D413 - Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
D420 - Guide to Site Characterization for Engineering, Design, and Construction Purposes
D421 - Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D422 - Standard Test Method for Particle-Size Analysis of Soils
D425 - Standard Test Method for Centrifuge Moisture Equivalent of Soils
D427 - Test Method for Shrinkage Factors of Soils by the Mercury Method
D429 - Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates
D430 - Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
D434 - Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
D440 - Standard Test Method of Drop Shatter Test for Coal
D441 - Standard Test Method of Tumbler Test for Coal
D444 - Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
D445 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
D446 - Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
D448 - Standard Classification for Sizes of Aggregate for Road and Bridge Construction
D449 - Standard Specification for Asphalt Used in Dampproofing and Waterproofing
D450 - Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
D451 - Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
D452 - Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
D453 - Standard Test Method for Tar Acids in Creosote-Coal Tar Solutions
D454 - Standard Test Method for Rubber Deterioration by Heat and Air Pressure
D455 - Standard Specification for Milled Toilet Soap
D456 - Standard Specification for Caustic Soda (Anhydrous)
D457 - Standard Specification for Modified Soda (Sesquicarbonate Type)
D458 - Standard Specification for Soda Ash
D459 - Standard Terminology Relating to Soaps and Other Detergents
D460 - Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
D461 - Standard Test Methods for Felt
D464 - Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
D465 - Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
D470 - Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
D471 - Standard Test Method for Rubber Property-Effect of Liquids
D473 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
D475 - Standard Specification for Pure Para Red Toner Pigment
D476 - Standard Specification for Titanium Dioxide Pigments
D478 - Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
D480 - Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
D482 - Standard Test Method for Ash from Petroleum Products
D483 - Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
D490 - Standard Specification for Road Tar
D495 - Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D496 - Standard Specification for Chip Soap
D497 - Standard Specification for Ordinary Laundry Bar Soap
D498 - Standard Specification for Powdered Soap (Nonalkaline Soap Powder)
D499 - Standard Specification for White Floating Toilet Soap
D500 - Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
D501 - Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
D502 - Standard Test Method for Particle Size of Soaps and Other Detergents
D509 - Standard Test Methods of Sampling and Grading Rosin
D511 - Standard Test Methods for Calcium and Magnesium In Water
D512 - Standard Test Methods for Chloride Ion In Water
D513 - Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
D516 - Standard Test Method for Sulfate Ion in Water
D517 - Standard Specification for Asphalt Plank
D518 - Standard Test Method for Rubber Deterioration-Surface Cracking
D519 - Standard Test Method for Length of Fiber in Wool Top
D520 - Standard Specification for Zinc Dust Pigment
D521 - Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
D522 - Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D523 - Standard Test Method for Specular Gloss
D524 - Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D525 - Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
D528 - Standard Test Method for Machine Direction of Paper and Paperboard
D529 - Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Carbon-Arc Method)
D531 - Standard Test Method for Rubber Property-Pusey and Jones Indentation
D533 - Standard Specification for Built Soap, Powdered
D534 - Standard Specification for Alkaline Soap Powder
D537 - Standard Specification for Sodium Metasilicate
D538 - Standard Specification for Trisodium Phosphate
D542 - Standard Test Method for Index of Refraction of Transparent Organic Plastics
D543 - Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D545 - Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
D546 - Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
D548 - Standard Test Method for Water-Soluble Acidity or Alkalinity of Paper
D555 - Standard Guide for Testing Drying Oils
D558 - Standard Test Methods for Moisture-Density Relations of Soil-Cement Mixtures
D559 - Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
D560 - Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
D561 - Standard Specification for Carbon Black Pigment for Paint
D562 - Standard Test Method for Consistency of Paints Using the Stormer Viscometer
D563 - Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions
D564 - Standard Test Methods for Liquid Paint Driers
D565 - Standard Test Method for Carbonizable Substances in White Mineral Oil
D566 - Standard Test Method for Dropping Point of Lubricating Grease
D570 - Standard Test Method for Water Absorption of Plastics
D572 - Standard Test Method for Rubber-Deterioration by Heat and Oxygen
D573 - Standard Test Method for Rubber-Deterioration in an Air Oven
D575 - Standard Test Methods for Rubber Properties in Compression
D578 - Standard Specification for Glass Fiber Strands
D579 - Standard Specification for Greige Woven Glass Fabrics
D580 - Standard Specification for Greige Woven Glass Tapes and Webbings
D581 - Standard Specification for Glass Fiber Greige Braided Tubular Sleeving
D584 - Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
D585 - Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
D586 - Standard Test Method for Ash in Pulp, Paper, and Paper Products
D589 - Standard Test Method for Opacity of Paper (15°/Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
D590 - Standard Test Method for Petroleum Wax in Paper
D594 - Standard Specification for Sodium Sesquisilicate
D595 - Standard Specification for Tetrasodium Pyrophosphate (Anhydrous)
D596 - Standard Practice for Reporting Results of Analysis of Water
D600 - Standard Specification for Liquid Paint Driers
D601 - Standard Specification for Oiticica Oil (Permanently Liquid)
D602 - Standard Specification for Barium Sulfate Pigments
D603 - Standard Specification for Aluminum Silicate Pigments (Hydrous)
D604 - Standard Specification for Diatomaceous Silica Pigment
D605 - Standard Specification for Magnesium Silicate Pigment (Talc)
D607 - Standard Specification for Wet Ground Mica Pigments
D608 - Standard Specification for Dibutyl Phthalate
D609 - Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D610 - Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
D611 - Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D612 - Standard Test Method for Carbonizable Substances in Paraffin Wax
D613 - Standard Test Method for Cetane Number of Diesel Fuel Oil
D617 - Standard Test Method for Punching Quality of Phenolic Laminated Sheets
D618 - Standard Practice for Conditioning Plastics for Testing
D619 - Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
D622 - Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
D623 - Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
D624 - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D628 - Standard Specification for Asbestos Tubular Sleeving
D629 - Standard Test Methods for Quantitative Analysis of Textiles
D632 - Standard Specification for Sodium Chloride
D633 - Standard Volume Correction Table for Road Tar
D635 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D638 - Standard Test Method for Tensile Properties of Plastics
D642 - Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
D643 - Standard Test Method for Folding Endurance of Paper by the Schopper Tester
D644 - Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying
D645/D645M - Standard Test Method for Thickness of Paper and Paperboard
D646 - Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
D648 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D653 - Standard Terminology Relating to Soil, Rock, and Contained Fluids
D656 - Standard Specification for Pure Toluidine Red Toner
D660 - Standard Test Method for Evaluating Degree of Checking of Exterior Paints
D661 - Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
D662 - Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
D664 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D665 - Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D668 - Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
D669 - Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
D671 - Standard Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force
D681 - Standard Specification for Jute Rove and Plied Yarn for Electrical and Packing Purposes
D685 - Standard Practice for Conditioning Paper and Paper Products for Testing
D686 - Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
D689 - Standard Test Method for Internal Tearing Resistance of Paper
D692 - Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
D693 - Standard Specification for Crushed Aggregate for Macadam Pavements
D695 - Standard Test Method for Compressive Properties of Rigid Plastics
D696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
D698 - Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft
D704 - Standard Specification for Melamine-Formaldehyde Molding Compounds
D705 - Standard Specification for Urea-Formaldehyde Molding Compounds
D706 - Standard Specification for Cellulose Acetate Molding and Extrusion Compounds
D707 - Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
D709 - Standard Specification for Laminated Thermosetting Materials
D710 - Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
D711 - Standard Test Method for No-Pick-Up Time of Traffic Paint
D713 - Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
D714 - Standard Test Method for Evaluating Degree of Blistering of Paints
D715 - Standard Test Methods for Analysis of Barium Sulfate Pigment
D716 - Standard Test Methods for Evaluating Mica Pigment
D717 - Standard Test Methods for Analysis of Magnesium Silicate Pigment
D718 - Standard Test Methods for Analysis of Aluminum Silicate Pigment
D719 - Standard Test Methods for Analysis of Diatomaceous Silica Pigment
D720 - Standard Test Method for Free-Swelling Index of Coal
D721 - Standard Test Method for Oil Content of Petroleum Waxes
D722 - Standard Test Method for Grease Resistance of Paper
D724 - Standard Test Method for Surface Wett-ability of Paper (Angle-of-Contact Method)
D726 - Standard Test Method for Resistance of Nonporous Paper to Passage of Air
D727 - Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
D729 - Standard Specification for Vinylidene Chloride Molding Compounds
D731 - Standard Test Method for Molding Index of Thermosetting Molding Powder
D732 - Standard Test Method for Shear Strength of Plastics by Punch Tool
D737 - Test Method for Air Permeability of Textile Fabrics
D740 - Standard Specification for Methyl Ethyl Ketone
D746 - Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D747 - Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D748 - Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
D750 - Standard Test Method for Rubber Deterioration in Carbon-Arc Weathering Apparatus
D751 - Standard Test Methods for Coated Fabrics
D763 - Standard Specification for Raw and Burnt Umber Pigments
D765 - Standard Specification for Raw and Burnt Sienna Pigments
D768 - Standard Specification for Yellow Iron Oxide Hydrated
D769 - Standard Specification for Black Synthetic Iron Oxide
D770 - Standard Specification for Isopropyl Alcohol
D772 - Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
D774/D774M - Standard Test Method for Bursting Strength of Paper
D776 - Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
D777 - Standard Test Methods for Flammability of Treated Paper and Paperboard
D778 - Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
D779 - Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method
D780 - Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
D784 - Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
D785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D787 - Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
D788 - Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D789 - Standard Test Methods for Determination of Relative Viscosity and Moisture Content of Polyamide (PA)
D790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792 - Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D799 - Standard Specification for Liquid Toilet Soap
D800 - Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
D801 - Standard Test Methods for Sampling and Testing Dipentene
D802 - Standard Test Methods for Sampling and Testing Pine Oils
D803 - Standard Test Methods for Testing Tall Oil
D804 - Terminology Relating to Naval Stores, Including Tall Oil and Related Products
D806 - Standard Test Method for Cement Content of Soil-Cement Mixtures
D807 - Standard Test Method for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM* Embrittlement Detector Method)
D808 - Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
D813 - Standard Test Method for Rubber Deterioration-Crack Growth
D814 - Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
D816 - Standard Test Methods for Rubber Cements
D817 - Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
D820 - Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
D822 - Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Exposure Apparatus
D823 - Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
D824 - Standard Test Method for Rate of Absorption of Water by Bibulous Papers
D828 - Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
D829 - Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
D831 - Standard Test Method for Gas Content of Cable and Capacitor Oils
D832 - Standard Practice for Rubber Conditioning For Low-Temperature Testing
D841 - Standard Specification for Nitration Grade Toluene
D843 - Standard Specification for Nitration Grade Xylene
D847 - Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
D848 - Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
D849 - Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
D850 - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D852 - Standard Test Method for Solidification Point of Benzene
D853 - Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
D854 - Standard Test Method for Specific Gravity of Soils
D857 - Standard Test Method for Aluminum in Water
D858 - Standard Test Methods for Manganese in Water
D859 - Standard Test Method for Silica in Water
D861 - Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
D865 - Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
D866 - Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
D868 - Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
D869 - Standard Test Method for Evaluating Degree of Settling of Paint
D870 - Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
D871 - Standard Test Methods of Testing Cellulose Acetate
D873 - Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
D874 - Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
D876 - Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D877 - Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D878 - Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D880 - Standard Test Method for Impact Testing for Shipping Containers and Systems
D882 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
D883 - Standard Terminology Relating to Plastics
D885 - Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
D887 - Standard Practices for Sampling Water-Formed Deposits
D888 - Standard Test Methods for Dissolved Oxygen in Water
D889 - Standard Test Method for Volatile Oil in Rosin
D890 - Standard Test Method for Water in Liquid Naval Stores
D891 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
D892 - Standard Test Method for Foaming Characteristics of Lubricating Oils
D893 - Standard Test Method for Insolubles In Used Lubricating Oils
D896 - Standard Test Method for Resistance of Adhesive Bonds to Chemical Reagents
D897 - Standard Test Method for Tensile Properties of Adhesive Bonds
D898 - Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
D899 - Standard Test Method for Applied Weight Per Unit Area of Liquid Adhesive
D901 - Standard Methods of Testing Askarels
D902 - Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
D903 - Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
D904 - Standard Practice for Exposure of Adhesive Specimens to Artificial Light
D905 - Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
D906 - Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
D907 - Standard Terminology of Adhesives
D909 - Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method
D910 - Standard Specification for Aviation Gasolines
D912 - Standard Specification for Cuprous Oxide for Use in Antifouling Paints
D913 - Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint
D914 - Standard Test Methods for Ethylcellulose
D918 - Standard Test Method for Blocking Resistance of Paper and Paperboard
D919 - Standard Test Method for Copper Number of Paper and Paperboard
D922 - Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
D923 - Standard Practices for Sampling Electrical Insulating Liquids
D924 - Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D925 - Standard Test Methods for Rubber Property-Staining of Surfaces (Contact, Migration, and Diffusion)
D926 - Standard Test Method for Rubber Property-Plasticity and Recovery (Parallel Plate Method)
D928 - Standard Specification for Sodium Bicarbonate
D929 - Standard Specification for Borax
D930 - Standard Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners
D932 - Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
D933 - Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
D934 - Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
D937 - Standard Test Method for Cone Penetration of Petrolatum
D938 - Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
D942 - Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method
D943 - Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
D945 - Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
D946 - Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
D950 - Standard Test Method for Impact Strength of Adhesive Bonds
D951 - Standard Test Method for Water Resistance of Shipping Containers by Spray Method
D952 - Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
D953 - Standard Test Method for Bearing Strength of Plastics
D955 - Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Plastics
D957 - Standard Practice for Determining Surface Temperature of Molds for Plastics
D960 - Standard Specification for Raw Castor Oil
D961 - Standard Specification for Dehydrated Castor Oil
D962 - Standard Specification for Aluminum Powder and Paste Pigments for Paints
D964 - Standard Specification for Copper Powder for Use in Antifouling Paints
D968 - Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D969 - Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
D970 - Standard Test Methods for Para Red and Toluidine Red Pigments
D971 - Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
D972 - Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
D974 - Standard Test Method for Acid and Base Number by Color-Indicator Titration
D975 - Standard Specification for Diesel Fuel Oils
D976 - Standard Test Methods for Calculated Cetane Index of Distillate Fuels
D977 - Standard Specification for Emulsified Asphalt
D979 - Standard Practice for Sampling Bituminous Paving Mixtures
D984 - Standard Test Methods for Reducible Sulfur in Paper
D985 - Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
D991 - Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
D994 - Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
D995 - Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
D996 - Standard Terminology of Packaging and Distribution Environments
D999 - Standard Methods for Vibration Testing of Shipping Containers
D1000 - Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1002 - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
D1003 - Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
D1004 - Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
D1005 - Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1006 - Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
D1007 - Standard Specification for sec-Butyl Alcohol
D1013 - Standard Test Method for Determining Total Nitrogen in Resins and Plastics
D1014 - Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel
D1015 - Standard Test Method for Freezing Points of High-Purity Hydrocarbons
D1016 - Standard Test Method for Purity of Hydrocarbons from Freezing Points
D1018 - Standard Test Method for Hydrogen In Petroleum Fractions
D1025 - Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene
D1029 - Standard Test Method for Peeling Resistance of Paper and Paperboard
D1030 - Standard Test Method for Fiber Analysis of Paper and Paperboard
D1034 - Standard Specification for Fluor-Chrome-Arsenate-Phenol
D1035 - Standard Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol
D1036 - Standard Test Methods of Static Tests of Wood Poles
D1037 - Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
D1038 - Standard Terminology Relating to Veneer and Plywood
D1039 - Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
D1042 - Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D1043 - Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
D1044 - Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
D1045 - Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
D1047 - Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
D1048 - Standard Specification for Rubber Insulating Blankets
D1049 - Standard Specification for Rubber Insulating Covers
D1050 - Standard Specification for Rubber Insulating Line Hose
D1051 - Standard Specification for Rubber Insulating Sleeves
D1052 - Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
D1053 - Standard Test Methods for Rubber Property-Stiffening at Low Temperatures Flexible Polymers and Coated Fabrics
D1054 - Standard Test Method for Rubber Property-Resilience Using a Rebound Pendulum
D1055 - Standard Specifications for Flexible Cellular Materials-Latex Foam
D1056 - Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber
D1059 - Standard Test Method for Yarn Number Based on Short-Length Specimens
D1060 - Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present
D1061 - Standard Specification for Asbestos Lap
D1062 - Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
D1064 - Standard Test Methods for Iron in Rosin Tall Oil Fatty Acids and Other Related Products
D1065 - Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
D1066 - Standard Practice for Sampling Steam
D1067 - Standard Test Methods for Acidity or Alkalinity of Water
D1068 - Standard Test Methods for Iron in Water
D1070 - Standard Test Methods for Relative Density of Gaseous Fuels
D1071 - Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
D1072 - Standard Test Method for Total Sulfur in Fuel Gases
D1073 - Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
D1074 - Standard Test Method for Compressive Strength of Bituminous Mixtures
D1075 - Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
D1076 - Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
D1078 - Standard Test Method for Distillation Range of Volatile Organic Liquids
D1079 - Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
D1082 - Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
D1083 - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
D1084 - Standard Test Methods for Viscosity of Adhesives
D1091 - Standard Test Methods for Phosphorus in Lubricating Oils and Additives
D1092 - Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
D1093 - Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
D1094 - Standard Test Method for Water Reaction of Aviation Fuels
D1101 - Standard Test Methods for Integrity of Glue Joints in Structural Laminated Wood Products for Exterior Use
D1102 - Standard Test Method for Ash in Wood
D1105 - Standard Test Method for Preparation of Extractive-Free Wood
D1106 - Standard Test Method for Acid-Insoluble Lignin in Wood
D1107 - Standard Test Method for Ethanol-Toluene Solubility of Wood
D1108 - Standard Test Method for Dichloromethane Solubles in Wood
D1109 - Standard Test Method for 1% Sodium Hydroxide Solubility of Wood
D1110 - Standard Test Methods for Water Solubility of Wood
D1113 - Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
D1117 - Standard Test Methods for Nonwoven Fabrics
D1118 - Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
D1119 - Standard Test Method for Percent Ash Content of Engine Coolants and Antirusts
D1120 - Standard Test Method for Boiling Point of Engine Coolants
D1121 - Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
D1122 - Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1123 - Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D1125 - Standard Test Methods for Electrical Conductivity and Resistivity of Water
D1126 - Standard Test Method for Hardness in Water
D1129 - Standard Terminology Relating to Water
D1131 - Standard Test Methods of Testing Rosin Oils
D1133 - Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
D1135 - Standard Test Methods for Chemical Analysis of Blue Pigments
D1139 - Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
D1140 - Standard Test Method for Amount of Material in Soils Finer Than the No. 200 (75-[mu]m) Sieve
D1141 - Standard Specification for Substitute Ocean Water
D1142 - Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
D1143 - Standard Test Method for Piles Under Static Axial Compressive Load
D1144 - Standard Practice for Determining Strength Development of Adhesive Bonds
D1146 - Standard Test Method for Blocking Point of Potentially Adhesive Layers
D1148 - Standard Test Method for Rubber Deterioration-Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
D1149 - Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
D1151 - Standard Test Method for Effect of Moisture and Temperature on Adhesive Bonds
D1152 - Standard Specification for Methanol (Methyl Alcohol)
D1153 - Standard Specification for Methyl Isobutyl Ketone
D1155 - Standard Test Method for Roundness of Glass Spheres
D1157 - Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
D1159 - Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
D1160 - Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
D1165 - Standard Nonmenclature of Domestic Hardwoods and Softwoods
D1166 - Standard Test Method for Methoxyl Groups in Wood and Related Materials
D1168 - Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
D1169 - Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
D1171 - Standard Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
D1172 - Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
D1173 - Standard Test Method for Foaming Properties of Surface-Active Agents
D1176 - Standard Test Method for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
D1177 - Standard Test Method for Freezing Point of Aqueous Engine Coolants
D1179 - Standard Test Methods for Fluoride Ion in Water
D1183 - Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
D1184 - Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
D1185 - Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D1186 - Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
D1187 - Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
D1188 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
D1190 - Standard Specification for Concrete Joint Sealer, Hot-Applied Elastic Type
D1192 - Standard Specification for Equipment for Sampling Water and Steam in Closed Conduits
D1193 - Standard Specification for Reagent Water
D1194 - Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings
D1195 - Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1196 - Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1198 - Standard Test Method for Solvent Tolerance of Amine Resins
D1199 - Standard Specification for Calcium Carbonate Pigments
D1200 - Standard Test Method for Viscosity by Ford Viscosity Cup
D1201 - Standard Specification for Thermosetting Polyester Molding Compounds
D1203 - Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
D1204 - Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1208 - Standard Test Methods for Common Properties of Certain Pigments
D1209 - Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D1210 - Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
D1211 - Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood
D1212 - Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1214 - Standard Test Method for Sieve Analysis of Glass Spheres
D1217 - Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
D1218 - Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
D1223 - Standard Test Method for Specular Gloss of Paper and Paperboard at 75°
D1224 - Standard Test Methods for Zinc and Cadmium in Paper
D1227 - Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
D1229 - Standard Test Method for Rubber Property-Compression Set at Low Temperatures
D1230 - Standard Test Method for Flammability of Apparel Textiles
D1233 - Standard Specification for Twine Made From Bast and Leaf Fibers
D1234 - Standard Test Method of Sampling and Testing Staple Length of Grease Wool
D1238 - Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
D1239 - Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
D1240 - Standard Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1241 - Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1242 - Standard Test Methods for Resistance of Plastic Materials to Abrasion
D1243 - Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
D1244 - Standard Practice for Designation of Yarn Construction
D1245 - Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
D1246 - Standard Test Method for Bromide Ion in Water
D1248 - Standard Specification for Polyethylene Plastics Molding and Extrusion Materials For Wire and Cable
D1249 - Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers
D1250 - Standard Guide for Petroleum Measurement Tables
D1252 - Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
D1253 - Standard Test Method for Residual Chlorine in Water
D1257 - Standard Specification for High-Gravity Glycerin
D1258 - Standard Test Methods for High-Gravity Glycerin
D1259 - Standard Test Methods for Nonvolatile Content of Resin Solutions
D1263 - Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases
D1264 - Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
D1265 - Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
D1266 - Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
D1267 - Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
D1272 - Standard Specification for Pentachlorophenol
D1274 - Standard Test Methods for Chemical Analysis of Pentachlorophenol
D1275 - Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
D1278 - Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
D1280 - Standard Test Method of Total Immersion Corrosion Test for Soak Tank Metal Cleaners
D1282 - Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool
D1283 - Standard Test Method for Alkali-Soluability of Wools
D1287 - Standard Test Method for pH of Engine Coolants and Antirusts
D1290 - Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
D1291 - Standard Practice for Estimation of Chlorine Requirement or Demand of Water, or Both
D1292 - Standard Test Method for Odor in Water
D1293 - Standard Test Methods for pH of Water
D1294 - Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
D1296 - Standard Test Method for Odor of Volatile Solvents and Diluents
D1298 - Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1301 - Standard Test Methods for Chemical Analysis of White Lead Pigments
D1304 - Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
D1305 - Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type
D1306 - Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Esters Containing Other Dibasic Acids (Gravimetric)
D1308 - Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
D1309 - Standard Test Method for Settling Properties of Traffic Paints During Storage
D1310 - Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1312 - Standard Test Methods for Apparent Free Phenols in Synthetic Phenolic Resins or Solutions Used for Coating Purposes
D1316 - Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
D1319 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D1321 - Standard Test Method for Needle Penetration of Petroleum Waxes
D1322 - Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
D1324 - Standard Specification for Modified Wood
D1325 - Standard Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
D1326 - Standard Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
D1327 - Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
D1329 - Standard Test Method for Evaluating Rubber Property-Retraction at Lower Temperatures (TR Test)
D1330 - Standard Specification for Rubber Sheet Gaskets
D1331 - Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D1334 - Standard Test Method for Wool Content of Raw Wool-Commercial Scale
D1335 - Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
D1336 - Standard Test Method for Distortion of Yarn in Woven Fabrics
D1337 - Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength
D1338 - Standard Test Method for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
D1342 - Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
D1343 - Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
D1347 - Standard Test Methods for Methylcellulose
D1348 - Standard Test Methods for Moisture in Cellulose
D1349 - Standard Practice for Rubber-Standard Temperatures For Testing
D1351 - Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
D1352 - Standard Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable
D1353 - Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
D1356 - Standard Terminology Relating to Sampling and Analysis of Atmospheres
D1357 - Standard Practice for Planning the Sampling of the Ambient Atmosphere
D1358 - Standard Test Method for Spectrophotometric Diene Value of Dehydrated Castor Oil and Its Derivatives
D1360 - Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
D1363 - Standard Test Method for Permanganate Time of Acetone and Methanol
D1364 - Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1366 - Standard Practice for Reporting Particle Size Characteristics of Pigments
D1367 - Standard Test Method for Lubricating Qualities of Graphites
D1369 - Standard Practice for Quantities of Materials for Bituminous Surface Treatments
D1370 - Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
D1374 - Standard Test Method of Aerated Total Immersion Corrosion Test for Metal Cleaners
D1384 - Standard Test Method for Corrosion Test for Engine Coolants in Glassware
D1385 - Standard Test Method for Hydrazine in Water
D1386 - Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
D1387 - Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
D1388 - Standard Test Method for Stiffness of Fabrics
D1389 - Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
D1392 - Standard Specification for Safflower Oil
D1394 - Standard Test Methods for Chemical Analysis of White Titanium Pigments
D1396 - Standard Test Methods for Chemical Analysis of Poly(Vinyl Butyral)
D1397 - Standard Test Method for Unsaponifiable Matter in Alkyd Resins and Resin Solutions
D1398 - Standard Test Method for Fatty Acid Content of Alkyd Resins and Alkyd Resin Solutions
D1399 - Standard Test Method for Unsaponifiable Contents of Tricresyl Phosphate
D1400 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
D1401 - Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D1403 - Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
D1404 - Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
D1405 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D1411 - Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D1412 - Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C
D1413 - Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
D1414 - Standard Test Methods for Rubber O-Rings
D1415 - Standard Test Method for Rubber Property-International Hardness
D1417 - Standard Test Methods for Rubber Latices-Synthetic
D1418 - Standard Practice for Rubber and Rubber Latices-Nomenclature
D1422 - Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
D1423 - Standard Test Method for Twist in Yarns by the Direct-Counting
D1424 - Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
D1425 - Standard Test Method for Unevenness of Textile Strands Using Capacitance Testing Equipment
D1426 - Standard Test Methods for Ammonia Nitrogen In Water
D1429 - Standard Test Methods for Specific Gravity of Water and Brine
D1430 - Standard Specification for Polychlorotrifluoroethylene (PCTFE) Plastics
D1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D1435 - Standard Practice for Outdoor Weathering of Plastics
D1436 - Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
D1439 - Standard Test Methods for Sodium Carboxymethylcellulose
D1440 - Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
D1441 - Standard Practice for Sampling Cotton Fibers for Testing
D1442 - Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
D1445 - Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
D1447 - Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
D1448 - Standard Test Method for Micronaire Reading of Cotton Fibers
D1452 - Standard Practice for Soil Investigation and Sampling by Auger Borings
D1455 - Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
D1456 - Standard Test Method for Rubber Property-Elongation at Specific Stress
D1458 - Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1459 - Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation
D1460 - Standard Test Method for Rubber Property-Change in Length During Liquid Immersion
D1461 - Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
D1462 - Standard Specification for Refined Soybean Oil
D1464 - Standard Test Method for Differential Dyeing Behavior of Cotton
D1465 - Standard Test Method for Blocking and Picking Points of Petroleum Wax
D1466 - Standard Test Method for Sampling Liquid Oils and Fatty Acids Commonly Used in Paints, Varnishes, and Related Materials
D1467 - Standard Guide for Testing Fatty Acids Used in Protective Coatings
D1468 - Standard Test Method for Volatile Matter in Tricresyl Phosphate
D1469 - Standard Test Method for Total Rosin Acids Content of Coating Vehicles
D1474 - Standard Test Methods for Indentation Hardness of Organic Coatings
D1475 - Standard test Method for Density of Liquid Coatings, Inks, and Related Products
D1476 - Standard Test Method for Heptane Miscibility of Lacquer Solvents
D1478 - Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
D1480 - Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
D1481 - Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
D1483 - Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
D1485 - Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
D1488 - Standard Test Method for Amylaceous Matter in Adhesives
D1489 - Standard Test Method for Nonvolatile Content of Aqueous Adhesives
D1490 - Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
D1492 - Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
D1493 - Standard Test Method for Solidification Point of Industrial Organic Chemicals
D1494 - Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D1498 - Standard Practice for Oxidation-Reduction Potential of Water
D1499 - Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics
D1500 - Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1505 - Standard Test Method for Density of Plastics by the Density-Gradient Technique
D1506 - Standard Test Methods for Carbon Black-Ash Content
D1508 - Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
D1509 - Standard Test Methods for Carbon Black-Heating Loss
D1510 - Standard Test Method for Carbon Black-Iodine Adsorption Number
D1511 - Standard Test Method for Carbon Black-Pellet Size Distribution
D1512 - Standard Test Methods for Carbon Black-pH Value
D1513 - Standard Test Method for Carbon Black, Pelleted-Pour Density
D1514 - Standard Test Method for Carbon Black-Sieve Residue
D1516 - Standard Test Method for Width of Leather
D1517 - Standard Definitions of Terms Relating to Leather
D1518 - Standard Test Method for Thermal Transmittance of Textile Materials
D1519 - Standard Test Method for Rubber Chemicals-Melting Range
D1523 - Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
D1524 - Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
D1525 - Standard Test Method for Vicat Softening Temperature of Plastics
D1527 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1531 - Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1534 - Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
D1535 - Standard Practice for Specifying Color by the Munsell System
D1537 - Standard Specification for Distilled Soybean Fatty Acids
D1538 - Standard Specification for Distilled Linseed Fatty Acids
D1539 - Standard Specification for Dehydrated Castor Acids
D1541 - Standard Test Method for Total Iodine Value of Drying Oils and Their Derivatives
D1544 - Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
D1545 - Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
D1546 - Standard Practice for Testing the Performance of Clear Floor Sealers
D1550 - ASTM Butadiene Measurement Tables
D1552 - Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
D1554 - Standard Definitions of Terms Relating to Wood-Base Fiber and Particle Panel Materials
D1555M - Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric]
D1555 - Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons
D1556 - Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557 - Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2,700 kN-m/m3))
D1558 - Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1560 - Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
D1561 - Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
D1562 - Standard Classification System for Cellulose Acetate Propionate Molding and Extrusion Compounds
D1566 - Standard Terminology Relating to Rubber
D1567 - Standard Test Method for Detergent Cleaners for Evaluation of Corrosive Effects on Certain Porcelain Enamels
D1568 - Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
D1569 - Standard Test Methods for Detergent Alkylate
D1570 - Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
D1571 - Standard Specification for Woven Asbestos Cloth
D1573 - Standard Test Method for Heat Aging of Asbestos Textiles
D1574 - Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
D1575 - Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver
D1576 - Standard Test Method for Moisture in Wool by Oven-Drying
D1577 - Standard Test Methods for Linear Density of Textile Fibers
D1578 - Standard Test Method for Breaking Strength of Yarn in Skein Form
D1579 - Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
D1582 - Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
D1583 - Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
D1585 - Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1586 - Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
D1587 - Standard Practice for Thin-Walled Tube Geotechnical Sampling of Soils
D1593 - Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
D1596 - Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
D1598 - Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599 - Standard Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
D1600 - Standard Terminology for Abbreviated Terms Relating to Plastics
D1601 - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
D1603 - Standard Test Method for Carbon Black In Olefin Plastics
D1607 - Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
D1608 - Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
D1610 - Standard Practice for Conditioning Leather and Leather Products for Testing
D1611 - Standard Test Method for Corrosion Produced by Leather in Contact with Metal
D1612 - Standard Test Method for Acetone in Methanol
D1613 - Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
D1614 - Standard Test Method for Alkalinity in Acetone
D1615 - Standard Test Methods for Glycerol,EthyleneGlycol,andPentaerythritolinAlkydResins
D1617 - Standard Test Method for Ester Value of Solvents and Thinners
D1618 - Standard Test Method for Carbon Black Extractables-Transmittance of Toluene Extract
D1619 - Standard Test Methods for Carbon Black-Sulfur Content
D1621 - Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
D1622 - Standard Test Method for Apparent Density of Rigid Cellular Plastics
D1623 - Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics
D1624 - Standard Specification for Acid Copper Chromate
D1625 - Standard Specification for Chromated Copper Arsenate
D1627 - Standard Test Methods for Chemical Analysis of Acid Copper Chromate
D1628 - Standard Test Methods for Chemical Analysis of Chromated Copper Arsenate
D1630 - Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
D1631 - Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
D1632 - Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
D1633 - Standard Test Method for Compressive Strength of Molded Soil-Cement Cylinders
D1634 - Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
D1635 - Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
D1636 - Standard Specification for Allyl Molding Compounds
D1639 - Standard Test Method for Acid Value of Organic Coating Materials
D1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1641 - Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
D1642 - Standard Test Methods for Elasticity or Toughness of Varnishes
D1646 - Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
D1647 - Standard Test Methods for Resistance of Dried Films of Varnishes to Water and Alkali
D1648 - Standard Specification for Basic Lead Silicochromate Pigment
D1649 - Standard Specification for Strontium Chromate Pigment
D1652 - Standard Test Methods for Epoxy Content of Epoxy Resins
D1653 - Standard Test Methods for Water Vapor Transmission of Organic Coating Films
D1654 - Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1655 - Standard Specification for Aviation Turbine Fuels
D1662 - Standard Test Method for Active Sulfur in Cutting Oils
D1665 - Standard Test Method for Engler Specific Viscosity of Tar Products
D1666 - Standard Methods for Conducting Machining Tests of Wood and Wood-Base Materials
D1667 - Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
D1668 - Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
D1669 - Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
D1670 - Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
D1673 - Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
D1675 - Standard Test Methods for Polytetrafluoroethylene Tubing
D1676 - Standard Test Methods for Film-Insulated Magnet Wire
D1677 - Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
D1679 - Standard Specification for Synthetic Rubber Heat- and Moisture-Resisting Insulation for Wire and Cable, 75°C Operation
D1681 - Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
D1684 - Standard Practice for Lighting Cotton Classing Rooms for Color Grading
D1685 - Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
D1686 - Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
D1687 - Standard Test Methods for Chromium in Water
D1688 - Standard Test Methods for Copper in Water
D1691 - Standard Test Methods for Zinc in Water
D1693 - Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
D1694 - Standard Specification for Threads 60° (Stub) for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D1695 - Standard Terminology of Cellulose and Cellulose Derivatives
D1696 - Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
D1698 - Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
D1701 - Standard Test Methods for Scavenger Content of Askarels
D1704 - Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
D1708 - Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
D1709 - Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
D1710 - Standard Specification for Polytetrafluoroethylene (PTFE) Basic Shapes, Rod, and Heavy-Walled Tubing
D1711 - Standard Terminology Relating to Electrical Insulation
D1712 - Standard Practice for Resistance of Plastics to Sulfide Staining
D1718 - Standard Specification for Isobutyl Acetate (95% Grade)
D1719 - Standard Specification for Isobutyl Alcohol
D1720 - Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
D1721 - Standard Test Method for Permanganate Time of Tricresyl Phosphate
D1722 - Standard Test Method for Water Miscibility of Water-Soluble Solvents
D1725 - Standard Test Method for Viscosity of Resin Solutions
D1726 - Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
D1729 - Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1730 - Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D1731 - Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
D1732 - Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
D1734 - Standard Practice for Making Cementitious Panels for Testing Coatings
D1735 - Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1739 - Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
D1740 - Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels
D1742 - Standard Test Method for Oil Separation from Lubricating Grease During Storage
D1743 - Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
D1744 - Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent
D1746 - Standard Test Method for Transparency of Plastic Sheeting
D1747 - Standard Test Method for Refractive Index of Viscous Materials
D1748 - Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
D1749 - Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
D1751 - Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
D1752 - Standard Specification for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
D1754 - Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
D1755 - Standard Specification for Poly(Vinyl Chloride) Resins
D1756 - Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
D1757 - Standard Test Method for Sulfur in Ash from Coal and Coke
D1758 - Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
D1760 - Standard Specification for Pressure Treatment of Timber Products
D1761 - Standard Test Methods for Mechanical Fasteners in Wood
D1762 - Standard Test Method for Chemical Analysis of Wood Charcoal
D1763 - Standard Specification for Epoxy Resins
D1764 - Standard Specification for Rubber Latex Products for Automotive Applications
D1765 - Standard Classification System for Carbon Blacks Used in Rubber Products
D1766 - Standard Test Method for Rubber Chemicals-Solubility
D1767 - Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
D1768 - Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
D1770 - Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
D1774 - Standard Test Methods for Elastic Properties of Textile Fibers
D1775 - Standard Test Method for Tension and Elongation of Wide Elastic Fabrics (Constant-Rate-of-Load Type Tensile Testing Machine)
D1776 - Standard Practice for Conditioning Testing Textiles
D1777 - Standard Test Method for Thickness of Textile Materials
D1779 - Standard Specification for Adhesive for Acoustical Materials
D1780 - Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
D1781 - Standard Test Method for Climbing Drum Peel for Adhesives
D1782 - Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
D1783 - Standard Test Methods for Phenolic Compounds in Water
D1784 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1785 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D1786 - Standard Specification for Toluene Diisocyanate
D1790 - Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1791 - Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
D1792 - Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
D1793 - Standard Test Method for Water Spotting of Emulsion Floor Polishes
D1795 - Standard Test Method for Intrinsic Viscosity of Cellulose
D1796 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D1799 - Standard Practice for Carbon Black-Sampling Packaged Shipments
D1807 - Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids
D1810 - Standard Test Method for Specific Gravity of Askarels
D1813 - Standard Test Method for Measuring Thickness of Leather Test Specimens
D1814 - Standard Test Method for Measuring Thickness of Leather Units
D1815 - Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
D1816 - Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
D1817 - Standard Test Method for Rubber Chemicals-Density
D1820 - Standard Test Method for Hydrolyzable Chlorine Compounds in Chlorinated Aromatic Hydrocarbons (Askarels)
D1821 - Standard Test Method for Inorganic Chlorides in Askarels
D1822 - Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
D1823 - Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824 - Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1825 - Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
D1826 - Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
D1827 - Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
D1828 - Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
D1829 - Standard Test Method for Electrical Resistance of Ceramic Materials at Elevated Temperatures
D1830 - Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
D1831 - Standard Test Method for Roll Stability of Lubricating Grease
D1832 - Standard Test Method for Peroxide Number of Petroleum Wax
D1833 - Standard Test Method for Odor of Petroleum Wax
D1834 - Standard Test Method for 20° Specular Gloss of Waxed Paper
D1835 - Standard Specification for Liquefied Petroleum (LP) Gases
D1836 - Standard Specification for Commercial Hexanes
D1837 - Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
D1838 - Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
D1839 - Standard Test Method for Amyl Nitrate in Diesel Fuels
D1840 - Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D1841 - Standard Specification for Distilled Coconut Fatty Acids
D1842 - Standard Specification for Distilled Corn Fatty Acids
D1843 - Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids
D1844 - Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
D1845 - Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
D1847 - Standard Test Methods for Total Chlorine Content of Epoxy Resins
D1848 - Standard Classification for Reporting Paint Film Failures Characteristic of Exterior Latex Paints
D1849 - Standard Test Method for Package Stability of Paint
D1854 - Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
D1856 - Standard Test Method for Recovery of Asphalt From Solution by Abson Method
D1857 - Standard Test Method for Fusibility of Coal and Coke Ash
D1858 - Standard Specification for Creosote-Petroleum Solution
D1859 - Standard Specification for Petroleum for Blending with Creosote
D1860 - Standard Test Method for Moisture and Creosote-Type Preservative in Wood
D1863 - Standard Specification for Mineral Aggregate Used on Built-Up Roofs
D1864 - Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
D1865 - Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
D1867 - Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
D1868 - Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
D1869 - Standard Specification for Rubber Rings for Asbestos-Cement Pipe
D1871 - Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
D1874 - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
D1875 - Standard Test Method for Density of Adhesives in Fluid Form
D1876 - Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
D1879 - Standard Practice for Exposure of Adhesive Specimens to High-Energy Radiation
D1881 - Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
D1882 - Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
D1883 - Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1886 - Standard Test Methods for Nickel in Water
D1889 - Standard Test Method for Turbidity of Water
D1890 - Standard Test Method for Beta Particle Radioactivity of Water
D1894 - Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
D1895 - Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
D1896 - Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
D1900 - Standard Practice for Carbon Black-Sampling Bulk Shipments
D1901 - Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
D1903 - Standard Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
D1907 - Standard Test Method for Yarn Number by the Skein Method
D1909 - Standard Table of Commercial Moisture Regains for Textile Fibers
D1912 - Standard Test Method for Cold-Crack Resistance of Upholstery Leather
D1913 - Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
D1914 - Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres
D1916 - Standard Test Method for Penetration of Adhesives
D1917 - Standard Test Methods for Rubber Property-Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
D1918 - Standard Test Method for Asbestos Content of Asbestos Textiles
D1921 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
D1922 - Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
D1926 - Test Methods for Carboxyl Content of Cellulose Test Methods for Carboxyl Content of Cellulose
D1928 - Standard Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens
D1929 - Standard Test Method for Determining Ignition Temperature of Plastics
D1931 - Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1932 - Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
D1933 - Standard Specification for Nitrogen Gas as an Electrical Insulating Material
D1934 - Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
D1937 - Standard Test Method for Carbon Black, Pelleted-Mass Strength
D1938 - Standard Test Method for Tear-Propagation Resistance of Plastic Film and Thin Sheeting by a Single-Tear Method
D1941 - Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
D1943 - Standard Test Method for Alpha Particle Radioactivity of Water
D1945 - Standard Test Method for Analysis of Natural Gas by Gas Chromatography
D1946 - Standard Practice for Analysis of Reformed Gas by Gas Chromatography
D1950 - Standard Test Method for Acetone Tolerance of Heat-Bodied Drying Oils
D1951 - Standard Test Method for Ash in Drying Oils and Fatty Acids
D1952 - Standard Test Method for Quantitative Determination of Break in Drying Oils
D1954 - Standard Test Method for Foots in Raw Linseed Oil (Volumetric Method)
D1955 - Standard Test Method for Gel Time of Drying Oils
D1957 - Standard Test Method for Hydroxyl Value of Fatty Oils and Acids
D1958 - Standard Test Method for Chloroform Insoluble Matter in Oiticica Oil
D1959 - Standard Test Method for Iodine Value of Drying Oils and Fatty Acids
D1960 - Standard Test Method for Loss on Heating of Drying Oils
D1962 - Standard Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids
D1963 - Standard Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C
D1964 - Standard Test Method for Tung Oil Quality
D1965 - Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids
D1966 - Standard Test Method for Foots in Raw Linseed Oil (Gravimetric Method)
D1967 - Standard Test Method for Measuring Color After Heating of Drying Oils
D1968 - Standard Terminology Relating to Paper and Paper Products
D1969 - Standard Specification for 2-Ethylhexanol (Synthetic)
D1970 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
D1971 - Standard Practices for Digestion of Samples for Determination of Metals by Flame Atomic Absorption or Plasma Emission Spectroscopy
D1972 - Standard Practice for Generic Marking of Plastic Products
D1973 - Standard Guide for Design of a Liner System for Containment of Wastes
D1974 - Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
D1975 - Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
D1976 - Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
D1977 - Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
D1978 - Standard Guide for Analysis of Electrocoat Bath Samples
D1979 - Standard Test Method for Free Formaldehyde Content of Amino Resins
D1980 - Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids
D1981 - Standard Test Method for Measuring Color After Heating of Fatty Acids
D1982 - Standard Test Method for Titer of Fatty Acids
D1983 - Standard Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters
D1984 - Standard Specification for Tall Oil Fatty Acids
D1985 - Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
D1986 - Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
D1987 - Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
D1988 - Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
D1989 - Standard Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters
D1990 - Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D1991 - Standard Test Method for Rubber Chemicals-2-Mercaptobenzothiazole (MBT)-Assay
D1992 - Standard Guide for Testing Synthetic Plasticizers Used in Rubber
D1993 - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
D1994 - Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
D1995 - Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
D1996 - Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
D1997 - Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
D1998 - Standard Specification for Polyethylene Upright Storage Tanks
D1999 - Standard Guide for Selection of Specimens and Test Parameters for International Commerce
D2000 - Standard Classification System for Rubber Products in Automotive Applications
D2001 - Standard Test Method for Depentanization of Gasoline and Naphthas
D2007 - Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
D2008 - Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
D2010/D2010M - Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
D2013 - Standard Method of Preparing Coal Samples for Analysis
D2014 - Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
D2015 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter
D2017 - Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
D2019 - Standard Test Method for Dirt in Paper and Paperboard
D2020 - Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
D2021 - Standard Specification for Neutral Detergent, 40 Percent Alkylbenzene Sulfonate Type
D2022 - Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
D2023 - Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
D2024 - Standard Test Method for Cloud Point of Nonionic Surfactants
D2026 - Standard Specification for Cutback Asphalt (Slow-Curing Type)
D2027 - Standard Specification for Cutback Asphalt (Medium-Curing Type)
D2028 - Standard Specification for Cutback Asphalt (Rapid-Curing Type)
D2029 - Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
D2030 - Standard Test Method for Water Solubility of Refined Pyridine
D2031 - Standard Test Method for Reducing Substances in Refined Pyridine
D2035 - Standard Practice for Coagulation-Flocculation Jar Test of Water
D2036 - Standard Test Methods for Cyanides in Water
D2041 - Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
D2042 - Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
D2043 - Standard Test Method for Silver Tarnishing by Paper
D2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Floor Surfaces as Measured by the James Machine
D2048 - Standard Test Method for Powdering of Floor Polish Films
D2050 - Standard Terminology Relating to Zippers
D2051 - Standard Test Method for Durability of Finish of Zippers to Laundering
D2052 - Standard Test Method for Colorfastness of Zippers to Drycleaning
D2053 - Standard Test Method for Colorfastness of Zippers to Light
D2054 - Standard Test Method for Colorfastness of Zipper Tapes to Crocking
D2057 - Standard Test Method for Colorfastness of Zippers to Laundering
D2058 - Standard Test Method for Durability of Finish of Zippers to Drycleaning
D2059 - Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
D2060 - Standard Test Methods for Measuring Zipper Dimensions
D2061 - Standard Test Methods for Strength Tests for Zippers
D2062 - Standard Test Methods for Operability of Zippers
D2063 - Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
D2064 - Standard Test Method for Print Resistance of Architectural Paints
D2065 - Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
D2066 - Standard Test Methods for Relative Tinting Strength of Printing Ink Dispersions
D2067 - Standard Test Method for Coarse Particles in Printing Ink Dispersions
D2068 - Standard Test Method for Filter Blocking Tendency of Distillate Fuel Oils
D2069 - Standard Specification for Marine Fuels
D2070 - Standard Test Method for Thermal Stability of Hydraulic Oils
D2071 - Standard Test Methods for Fatty Nitrogen Products
D2072 - Standard Test Method for Water in Fatty Nitrogen Compounds
D2073 - Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method
D2074 - Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
D2075 - Standard Test Method for Iodine Value of Fatty Amines, Amidoamines, and Diamines
D2076 - Standard Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides
D2077 - Standard Test Method for Ash in Fatty Quaternary Ammonium Chlorides
D2078 - Standard Test Method for Iodine Value of Fatty Quaternary Ammonium Chlorides
D2079 - Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides
D2080 - Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
D2081 - Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides
D2082 - Standard Test Method for Percent of Non-Amines in Fatty Nitrogen Compounds
D2083 - Standard Test Method for Calculation of Percent of Primary, Secondary, and Tertiary Amines in Fatty Amines
D2084 - Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
D2085 - Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method)
D2086 - Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
D2087 - Standard Test Method for Iron in Formaldehyde Solutions
D2090 - Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids
D2091 - Standard Test Method for Print Resistance of Lacquers
D2092 - Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting
D2093 - Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
D2094 - Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
D2095 - Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
D2096 - Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
D2097 - Standard Test Method for Flex Testing of Finish on Upholstery Leather
D2098 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
D2099 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
D2100 - Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
D2102 - Standard Test Method for Shrinkage of Textile Fiber Bundle Test
D2103 - Standard Specification for Polyethylene Film and Sheeting
D2104 - Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
D2105 - Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2106 - Standard Test Methods for the Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
D2109 - Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
D2110 - Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
D2111 - Standard Test Methods for Specific Gravity of Halogenated Organic Solvents and Their Admixtures
D2112 - Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Rotating Bomb
D2113 - Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2115 - Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
D2116 - Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials
D2118 - Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its' Products
D2119 - Standard Test Method for Aldehydes in Styrene Monomer
D2121 - Standard Test Methods for Polymer Content of Styrene Monomer and [alpha]-Methylstyrene
D2122 - Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2124 - Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
D2126 - Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D2130 - Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
D2131 - Standard Specification for Natural Muscovite Mica Splittings
D2132 - Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
D2134 - Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
D2136 - Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
D2137 - Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
D2143 - Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2144 - Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
D2148 - Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
D2149 - Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
D2151 - Standard Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients
D2152 - Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
D2156 - Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
D2157 - Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
D2158 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
D2161 - Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D2162 - Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
D2163 - Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography
D2164 - Standard Methods of Testing Structural Insulating Roof Deck
D2165 - Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
D2166 - Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167 - Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2168 - Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2170 - Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
D2171 - Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
D2172 - Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
D2175 - Standard Test Method for Book Bulk and Book Bulking Number of Paper
D2176 - Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
D2177 - Standard Test Method for Ink Absorption of Blotting Paper
D2178 - Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
D2179 - Standard Specification for Combination Bar Soap
D2180 - Standard Test Method for Active Oxygen in Bleaching Compounds
D2186 - Standard Test Methods for Deposit-Forming Impurities in Steam
D2187 - Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
D2190 - Standard Specification for Vinyl Acetate
D2191 - Standard Test Method for Acetaldehyde Content of Vinyl Acetate
D2192 - Standard Test Method for Purity of Aldehydes and Ketones
D2193 - Standard Test Method for Hydroquinone in Vinyl Acetate
D2194 - Standard Test Method for Concentration of Formaldehyde Solutions
D2195 - Standard Test Methods for Pentaerythritol
D2196 - Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
D2197 - Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
D2198 - Standard Test Method for Stain Removal From Multicolor Lacquers
D2199 - Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
D2200 - Pictoral Surface Preparation Standards for Painting Steel Surfaces
D2201 - Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2202 - Standard Test Method for Slump of Sealants
D2203 - Standard Test Method for Staining from Sealants
D2205 - Standard Guide for Selection of Tests for Traffic Paints
D2207 - Standard Test Method for Bursting Strength of Leather by the Ball Method
D2208 - Standard Test Method for Breaking Strength of Leather by the Grab Method
D2209 - Standard Test Method for Tensile Strength of Leather
D2210 - Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
D2211 - Standard Test Method for Elongation of Leather
D2212 - Standard Test Method for Slit Tear Resistance of Leather
D2213 - Standard Test Method for Compressibility of Leather
D2214 - Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus
D2216 - Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2217 - Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D2218 - Standard Specification for Molybdate Orange Pigments
D2219 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
D2220 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
D2221 - Standard Test Method for Creep Properties of Package Cushioning Materials
D2222 - Standard Test Method for Methanol Extract of Vinyl Chloride Resins
D2225 - Standard Test Methods for Silicone Fluids Used for Electrical Insulation
D2226 - Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
D2227 - Standard Specification for Natural Rubber (NR) Technical Grades
D2228 - Standard Test Method for Rubber Property-Abrasion Resistance (Pico Abrader)
D2229 - Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
D2230 - Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
D2233 - Standard Specification for Chlorinated Aromatic Hydrocarbons (Askarels) for Capacitors
D2234 - Standard Practice for Collection of a Gross Sample of Coal
D2235 - Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2238 - Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
D2239 - Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2240 - Standard Test Method for Rubber Property-Durometer Hardness
D2241 - Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2243 - Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2244 - Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
D2245 - Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
D2247 - Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
D2248 - Standard Practice for Detergent Resistance of Organic Finishes
D2249 - Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash
D2251 - Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
D2252 - Standard Specification for Fineness of Types of Alpaca
D2255 - Standard Test Method for Grading Spun Yarns for Appearance
D2256 - Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
D2257 - Standard Test Method for Extractable Matter in Textiles
D2258 - Standard Practice for Sampling Yarn for Testing
D2259 - Standard Test Method for Shrinkage of Yarns
D2260 - Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
D2261 - Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
D2265 - Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
D2266 - Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
D2268 - Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
D2269 - Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
D2270 - Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
D2271 - Standard Test Method for Preliminary Examination of Hydraulic Fluids (Wear Test)
D2272 - Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
D2273 - Standard Test Method for Trace Sediment in Lubricating Oils
D2274 - Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
D2275 - Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
D2276 - Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D2278 - Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
D2281 - Standard Test Method for Evaluation of Wetting Agents by the Skein Test
D2282 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
D2283 - Standard Specification for Chlorinated Aromatic Hydrocarbons (Askarels) for Transformers
D2284 - Standard Test Method for Acidity of Sulfur Hexafluoride
D2285 - Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method
D2287 - Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D2288 - Standard Test Method for Weight Loss of Plasticizers on Heating
D2290 - Standard Test Method for Apparent Tensile Strength of Ring or Tubular Plastics and Reinforced Plastics by Split Disk Method
D2291 - Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
D2293 - Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
D2294 - Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
D2295 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
D2296 - Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
D2300 - Standard Test Method for Gassing of Insulating Oils Under Electrical Stress and Ionization (Modified Pirelli Method)
D2301 - Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D2303 - Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
D2304 - Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
D2305 - Standard Test Methods for Polymeric Films Used for Electrical Insulation
D2306 - Standard Test Method for C8 Aromatic Hydrocarbon Analysis by Gas Chromatography
D2307 - Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
D2308 - Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
D2310 - Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2318 - Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
D2319 - Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
D2320 - Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
D2321 - Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2322 - Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
D2323 - Standard Specification for Refined Pyridine (1 Degree)
D2325 - Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus
D2330 - Standard Test Method for Methylene Blue Active Substances
D2331 - Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
D2332 - Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
D2336 - Standard Guide for Specifying Factory Applied Wood Coatings
D2337 - Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
D2338 - Standard Test Method for Determining Particle Size of Multicolor Lacquers
D2339 - Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
D2340 - Standard Test Method for Peroxides in Styrene Monomer
D2343 - Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
D2344 - Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method
D2346 - Standard Test Method for Apparent Density of Leather
D2347 - Standard Test Method for Measuring Area of Leather Test Specimens
D2348 - Standard Test Method for Arsenic in Paint
D2349 - Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
D2350 - Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
D2351 - Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
D2352 - Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
D2354 - Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D2356 - Standard Specification for Phosphate and Silica Containing Scouring Powder Compounds
D2357 - Qualitative Classification of Surfactants by Infrared Absorption
D2358 - Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
D2359 - Standard Specification for Refined Benzene-535
D2360 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
D2361 - Standard Test Method for Chlorine in Coal
D2363 - Standard Test Methods for Hydroxypropyl Methylcellulose
D2364 - Standard Test Methods for Hydroxyethylcellulose
D2369 - Standard Test Method for Volatile Content of Coatings
D2370 - Standard Test Method for Tensile Properties of Organic Coatings
D2371 - Standard Test Method for Pigment Content of Solvent-Reducible Paints
D2372 - Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
D2373 - Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
D2374 - Standard Test Method for Lead in Paint Driers by EDTA Method
D2375 - Standard Test Method for Manganese in Paint Driers by EDTA Method
D2376 - Standard Test Method for Slump of Face Glazing and Bedding Compounds on Metal Sash
D2377 - Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2378 - Standard Specification for Formaldehyde 50% Grade Uninhibited and 37% Grade Inhibited and Uninhibited
D2379 - Standard Test Method for Acidity of Formaldehyde Solutions
D2380 - Standard Test Method for Methanol Content of Formaldehyde Solutions
D2381 - Standard Test Methods for Flexible Composite Materials Used for Electrical Insulation
D2383 - Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
D2384 - Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
D2386 - Standard Test Method for Freezing Point of Aviation Fuels
D2389 - Standard Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellents
D2392 - Standard Test Method for Color Of Dyed Aviation Gasolines
D2394 - Standard Method for Simulated Service Testing of Wood and Wood-Base Finish Flooring
D2395 - Standard Test Methods for Specific Gravity of Wood and Wood-Base Materials
D2396 - Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
D2397 - Standard Specification for Cationic Emulsified Asphalt
D2399 - Standard Practice for Selection of Cutback Asphalts
D2400 - Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
D2402 - Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
D2403 - Standard Specification for Refined Phthalic Anhydride-1308
D2412 - Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2413 - Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
D2414 - Standard Test Method for Carbon Black-n-Dibutyl Phthalate Absorption Number
D2415 - Standard Test Method for Ash in Coal Tar and Pitch
D2416 - Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
D2419 - Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
D2420 - Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
D2421 - Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
D2422 - Standard Classification of Industrial Fluid Lubricants by Viscosity System
D2423 - Standard Test Method for Surface Wax on Waxed Paper or Paperboard
D2425 - Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
D2426 - Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
D2427 - Standard Test Method for Determination of C₂ through C₅ Hydrocarbons in Gasolines by Gas Chromatography
D2433 - Standard Test Methods for Rubber Thread
D2434 - Standard Test Method for Permeability of Granular Soils (Constant Head)
D2435 - Standard Test Method for One-Dimensional Consolidation Properties of Soils
D2439 - Standard Specification for Refined Phenol
D2440 - Standard Test Method for Oxidation Stability of Mineral Insulating Oil
D2441 - Standard Test Method for Hydrolyzable Chlorine Compounds in Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxing
D2442 - Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
D2443 - Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment
D2444 - Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2447 - Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
D2448 - Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
D2449 - Standard Specification for Rubber Bales From Natural Sources-Limit on Coating
D2450 - Standard Test Method for Bond of Oil- and Resin-Base Caulking Compounds
D2451 - Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash
D2452 - Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453 - Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2454 - Standard Practice for Determining the Effect of Overbaking on Organic Coatings
D2455 - Standard Test Method for Identification of Carboxylic Acids in Alkyd Resins
D2456 - Standard Test Method for Identification of Polyhydric Alcohols in Alkyd Resins
D2457 - Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
D2460 - Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
D2462 - Standard Test Method for Moisture in Wool by Distillation With Toluene
D2463 - Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
D2464 - Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2468 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
D2471 - Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
D2472 - Standard Specification for Sulfur Hexafluoride
D2475 - Standard Specification for Wool Felt
D2477 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
D2481 - Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
D2482 - Standard Test Method for Surface Strength of Paper (Wax Pick Method)
D2484 - Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
D2485 - Standard Test Methods for Evaluating Coatings For High Temperature Service
D2486 - Standard Test Method for Scrub Resistance of Wall Paints
D2487 - Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488 - Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2489 - Standard Test Method for Degree of Particle Coating of Bituminous-Aggregate Mixtures
D2492 - Standard Test Method for Forms of Sulfur in Coal
D2493 - Tables Viscosity-Temperature Chart for Asphalts
D2494 - Standard Test Method for Commercial Mass of a Shipment of Yarn or Man-Made Staple Fiber or Tow
D2495 - Standard Test Method for Moisture in Cotton by Oven-Drying
D2497 - Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
D2500 - Standard Test Method for Cloud Point of Petroleum Products
D2501 - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
D2502 - Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
D2503 - Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
D2504 - Standard Test Method for Noncondensable Gases in C₂ and Lighter Hydrocarbon Products by Gas Chromatography
D2505 - Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
D2507 - Standard Terminology of Rheological Properties of Gelled Rocket Propellants
D2508 - Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
D2509 - Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
D2510 - Standard Test Method for Adhesion of Solid Film Lubricants
D2511 - Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
D2512 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
D2513 - Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
D2517 - Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2518 - Standard Specification for Woven Glass Fabrics for Electrical Insulation
D2519 - Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2520 - Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650°C
D2521 - Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
D2522 - Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
D2523 - Standard Practice for Testing Load-Strain Properties of Roofing Membranes
D2524 - Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method- 1/8-in. (3.2-mm) Gage Length
D2525 - Standard Practice for Sampling Wool for Moisture
D2526 - Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
D2527 - Standard Specification for Rubber Seals-Splice Strength
D2532 - Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
D2533 - Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels
D2534 - Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
D2538 - Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
D2539 - Standard Test Method for Shock Sensitivity of Liquid Monopropellants by the Card-Gap Test
D2540 - Standard Test Method for Drop-Weight Sensitivity of Liquid Monopropellants
D2541 - Standard Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants
D2549 - Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
D2555 - Standard Test Methods for Establishing Clear Wood Strength Values
D2556 - Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
D2557 - Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)
D2559 - Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
D2561 - Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
D2562 - Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
D2563 - Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
D2564 - Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2565 - Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
D2569 - Standard Test Method for Distillation of Pitch
D2570 - Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
D2571 - Standard Guide for Testing Wood Furniture Lacquers
D2572 - Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
D2573 - Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2574 - Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
D2575 - Standard Method for Testing Polymerized Fatty Acids
D2578 - Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
D2579 - Standard Test Method for Total Organic Carbon in Water
D2580 - Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
D2581 - Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
D2582 - Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D2583 - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2584 - Standard Test Method for Ignition Loss of Cured Reinforced Resins
D2589 - Standard Test Method for McNett Wet Classification of Asbestos Fiber
D2590 - Standard Test Method for Sampling Chrysotile Asbestos
D2593 - Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
D2594 - Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
D2595 - Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
D2596 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
D2597 - Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
D2598 - Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
D2603 - Test Method for Sonic Shear Stability of Polymer-Containing Oils
D2604 - Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions
D2606 - Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents
D2609 - Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2612 - Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests
D2613 - Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
D2616 - Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
D2617 - Standard Test Method for Total Ash in Leather
D2619 - Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
D2620 - Standard Test Method for Light Stability of Clear Coatings
D2621 - Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
D2622 - Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2624 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D2625 - Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
D2626 - Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
D2627 - Standard Specification for Diacetone Alcohol
D2628 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
D2632 - Standard Test Method for Rubber Property-Resilience by Vertical Rebound
D2633 - Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
D2634 - Standard Specification for Methyl Amyl Acetate (95% Grade)
D2635 - Standard Specification for Methyl Isobutyl Carbinol
D2636 - Standard Specification for Hexylene Glycol
D2638 - Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
D2639 - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
D2643 - Standard Specification for Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
D2644 - Standard Tolerances for Yarns Spun on the Woolen System
D2645 - Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
D2646 - Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
D2647 - Standard Specification for Crosslinkable Ethylene Plastics
D2649 - Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
D2650 - Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
D2651 - Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
D2652 - Standard Terminology Relating to Activated Carbon
D2655 - Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
D2656 - Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
D2657 - Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
D2658 - Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
D2659 - Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
D2661 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2662 - Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2663 - Standard Test Methods for Carbon Black-Dispersion in Rubber
D2664 - Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
D2665 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2666 - Standard Specification for Polybutylene (PB) Plastic Tubing
D2667 - Standard Test Method for Biodegradability of Alkylbenzene Sulfonates
D2668 - Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
D2669 - Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
D2670 - Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
D2671 - Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
D2672 - Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
D2673 - Standard Specification for Oriented Polypropylene Film
D2674 - Standard Test Method for Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
D2680 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D2683 - Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2684 - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
D2685 - Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
D2686 - Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
D2687 - Standard Practices for Sampling Particulate Ion-Exchange Materials
D2688 - Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
D2689 - Standard Practices for Testing Alkyd Resins
D2690 - Standard Test Method for Isophthalic Acid in Alkyd and Polyester Resins
D2692 - Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
D2693 - Standard Specification for Ethylene Glycol
D2694 - Standard Specification for Diethylene Glycol
D2697 - Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
D2698 - Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
D2699 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D2700 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
D2702 - Standard Practice for Rubber Chemicals-Determination ofInfrared Absorption Characteristics
D2703 - Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics
D2709 - Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2710 - Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
D2711 - Standard Test Method for Demulsibility Characteristics of Lubricating Oils
D2712 - Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography
D2713 - Standard Test Method for Dryness of Propane (Valve Freeze Method)
D2714 - Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
D2715 - Standard Test Method for Volatilization Rates of Lubricants in Vacuum
D2717 - Standard Test Method for Thermal Conductivity of Liquids
D2718 - Standard Test Method for Structural Panels in Planar Shear (Rolling Shear)
D2719 - Standard Test Methods for Structural Panels in Shear Through-the-Thickness
D2720 - Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions
D2724 - Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
D2728 - Standard Practice for Paving Uses and Application Temperatures for Road Tars
D2729 - Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D2732 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
D2734 - Standard Test Methods for Void Content of Reinforced Plastics
D2737 - Standard Specification for Polyethylene (PE) Plastic Tubing
D2739 - Standard Test Method for Volume Resistivity of Conductive Adhesives
D2741 - Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
D2743 - Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
D2745 - Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
D2746 - Standard Test Method for Staining Tendency of Asphalt (Stain Index)
D2749 - Standard Symbols for Dimensions of Plastic Pipe Fittings
D2751 - Standard Specification for Acrylonitrile-Butadiene-Styrene(ABS)SewerPipeandFittings
D2752 - Standard Test Methods for Air Permeability of Asbestos Fibers
D2754 - Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
D2755 - Standard Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide
D2756 - Standard Test Method for Weight Loss of Electrical Insulating Varnishes
D2757 - Standard Specification for Impervious Steatite Ceramics for Electrical and Electronic Applications
D2758 - Standard Test Method for Engine Coolants by Engine Dynamometer
D2759 - Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
D2760 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Paper Chromatographic Method
D2761 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Ion Exchange Method
D2764 - Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
D2765 - Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D2766 - Standard Test Method for Specific Heat of Liquids and Solids
D2768 - Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
D2770 - Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
D2771 - Standard Test Methods for Compaction Density of Electrical Grade Magnesium Oxide
D2772 - Standard Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide
D2773 - Standard Test Method for Loss on Ignition of Electrical Grade Magnesium Oxide
D2774 - Standard Practice for Underground Installation of Thermoplastic Pressure Piping
D2777 - Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
D2779 - Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
D2780 - Standard Test Method for Solubility of Fixed Gases in Liquids
D2782 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
D2783 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
D2784 - Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
D2786 - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
D2789 - Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
D2791 - Standard Test Methods for Continuous Determination of Sodium in Water
D2792 - Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
D2793 - Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
D2794 - Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
D2795 - Standard Test Methods for Analysis of Coal and Coke Ash
D2797 - Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
D2798 - Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite in a Polished Specimen of Coal
D2799 - Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
D2800 - Standard Test Method for Preparation of Methyl Esters From Oils for Determination of Fatty Acid Composition by Gas-Liquid Chromatography
D2802 - Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
D2803 - Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D2804 - Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
D2805 - Standard Test Method for Hiding Power of Paints by Reflectometry
D2807 - Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
D2809 - Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
D2810 - Standard Test Method for pH of Leather
D2812 - Standard Test Method for Non-Lint Content of Cotton
D2813 - Standard Practice for Sampling Leather for Physical and Chemical Tests
D2816 - Standard Test Method for Cashmere Coarse-Hair Content in Cashmere
D2817 - Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
D2821 - Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
D2822 - Standard Specification for Asphalt Roof Cement
D2823 - Standard Specification for Asphalt Roof Coatings
D2824 - Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, and Fibered without Asbestos
D2825 - Standard Terminology Relating to Polishes and Related Materials
D2827 - Standard Specification for Styrene Monomer
D2828 - Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type
D2829 - Standard Practice for Sampling and Analysis of Built-Up Roofs
D2830 - Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products
D2832 - Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
D2834 - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
D2835 - Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
D2837 - Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
D2838 - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
D2839 - Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
D2842 - Standard Test Method for Water Absorption of Rigid Cellular Plastics
D2843 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2844 - Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2845 - Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2846/D2846M - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2847 - Standard Practice for Testing Engine Coolants in Car and Light Truck Service
D2850 - Standard Test Method for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
D2851 - Standard Specification for Liquid Optical Adhesive
D2852 - Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
D2854 - Standard Test Method for Apparent Density of Activated Carbon
D2855 - Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2856 - Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer
D2857 - Standard Practice for Dilute Solution Viscosity of Polymers
D2858 - Standard Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
D2859 - Standard Test Method for Flammability of Finished Textile Floor Covering Materials
D2860/D2860M - Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
D2861 - Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
D2862 - Standard Test Method for Particle Size Distribution of Granular Activated Carbon
D2863 - Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D2864 - Standard Terminology Relating to Electrical Insulating Liquids and Gases
D2865 - Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
D2866 - Standard Test Method for Total Ash Content of Activated Carbon
D2867 - Standard Test Methods for Moisture in Activated Carbon
D2868 - Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
D2872 - Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
D2873 - Standard Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry
D2875 - Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
D2876 - Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
D2878 - Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
D2879 - Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
D2880 - Standard Specification for Gas Turbine Fuel Oils
D2882 - Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D2883 - Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
D2884 - Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
D2885 - Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
D2887 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D2889 - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
D2890 - Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
D2892 - Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
D2893 - Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
D2895 - Standard Test Method for Gloss Retention of Waxed Paper and Paperboard After Storage at 40°C (104°F)
D2896 - Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D2898 - Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
D2899 - Standard Practice for Establishing Design Stresses for Round Timber Piles
D2900 - Standard Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements
D2901 - Standard Test Method for Cement Content of Freshly Mixed Soil-Cement
D2902 - Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
D2903 - Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D2904 - Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
D2905 - Standard Practice for Statements on Number of Specimens for Textiles
D2906 - Standard Practice for Statements on Precision and Bias for Textiles
D2907 - Standard Test Methods for Microquantities of Uranium in Water by Fluorometry
D2908 - Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
D2911 - Standard Specification for Dimensions and Tolerances for Plastic Bottles
D2913 - Standard Test Method for Mercaptan Content of the Atmosphere
D2914 - Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
D2915 - Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
D2916 - Standard Specification for Isophorone
D2917 - Standard Specification for Methyl Isoamyl Ketone
D2918 - Standard Practice for Durability Assessment of Adhesive Joints Stressed in Peel
D2919 - Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
D2921 - Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
D2922 - Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
D2923 - Standard Test Method for Rigidity of Polyolefin Film and Sheeting
D2924 - Standard Test Method for External Pressure Resistance of "Fiberglass"
D2925 - Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2929 - Standard Test Method for Sulfur Content of Cellulosic Materials by X-ray Fluorescence
D2930 - Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
D2935 - Standard Test Method for Apparent Density of Industrial Aromatic Hydrocarbons
D2936 - Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2937 - Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2938 - Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens
D2939 - Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
D2940 - Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
D2941 - Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
D2942 - Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
D2943 - Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
D2945 - Standard Test Method for Gas Content of Insulating Oils
D2946 - Standard Terminology for Asbestos and Asbestos-Cement Products
D2947 - Standard Test Method for Screen Analysis of Asbestos Fibers
D2949 - Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2950 - Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
D2951 - Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
D2955 - Standard Specification for Hand Scrubbing Soap (Grit Soap) Paste and Bar
D2957 - Standard Specification for Hand Scrubbing Soap (Grit Soap) Powder
D2958 - Standard Specification for Powdered Toilet Soap
D2959 - Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
D2960 - Standard Test Method of Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances
D2961 - Standard Test Method for Total Moisture in Coal Reduced to 2.36-mm (No. 8) Mesh Top Sieve Size (Limited-Purpose Method)
D2962 - Standard Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
D2967 - Standard Test Method for Edge Coverage of Coating Powders
D2968 - Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
D2969 - Standard Test Methods for Steel Tire Cords
D2970/D2970M - Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
D2972 - Standard Test Methods for Arsenic in Water
D2974 - Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2976 - Standard Test Method for pH of Peat Materials
D2977 - Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
D2979 - Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
D2980 - Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
D2981 - Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
D2982 - Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
D2983 - Standard Test Method for Low-Temperature Viscosity of Automotive Fluid Lubricants Measured by Brookfield Viscometer
D2985 - Standard Test Method for Color of Asbestos
D2986 - Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
D2987 - Standard Test Method for Moisture Content of Asbestos Fiber
D2988 - Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
D2990 - Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
D2992 - Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2993 - Standard Specification for Acrylonitrile-Butadiene Rubberized Tar
D2994 - Standard Test Methods for Rubberized Tar
D2995 - Standard Practice for Determining Application Rate of Bituminous Distributors
D2996 - Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997 - Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2998 - Standard Test Method for Polyhydric Alcohols in Alkyd Resins
D3000 - Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter
D3002 - Standard Guide for Evaluation of Coatings Applied to Plastics
D3003 - Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
D3004 - Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
D3005 - Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D3006 - Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
D3009 - Standard Test Method for Composition of Turpentine by Gas Chromatography
D3012 - Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Biaxial Rotator
D3013 - Standard Specification for Epoxy Molding Compounds
D3014 - Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D3015 - Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds
D3016 - Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
D3017 - Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
D3018 - Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
D3019 - Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Abestos Fibered
D3021 - Standard Specification for Phthalocyanine Green Pigments
D3022 - Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
D3023 - Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
D3025 - Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
D3026 - Standard Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
D3028 - Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids
D3030 - Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
D3032 - Standard Test Methods for Hookup Wire Insulation
D3034 - Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3038 - Standard Test Method for Drop Shatter Test for Coke
D3039/D3039M - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
D3042 - Standard Test Method for Insoluble Residue in Carbonate Aggregates
D3043 - Standard Methods of Structural Panels in Flexure
D3044 - Standard Test Method for Shear Modulus of Wood-Based Structural Panels
D3045 - Standard Practice for Heat Aging of Plastics Without Load
D3046 - Standard Specification for Powdered Hand Cleaner (Soap with Borax)
D3047 - Standard Specification for Powdered Hand Cleaner (Soap with Vegetable Scrubber)
D3048 - Standard Test Method of Assay for Alkaline Protease
D3049 - Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
D3050 - Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics
D3052 - Standard Practice for Rating Water-Emulsion Floor Polishes
D3053 - Standard Terminology Relating to Carbon Black
D3054 - Standard Test Methods for Analysis of Cyclohexane by Gas Chromatography
D3056 - Standard Test Method for Gel Time of Solventless Varnishes
D3057 - Standard Test Method for Moisture in Aerosol Products
D3060 - Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
D3063 - Standard Test Method for Pressure in Glass Aerosol Bottles
D3064 - Terminology Relating to Aerosol Products
D3065 - Standard Test Methods for Flammability of Aerosol Products
D3069 - Standard Test Method for Delivery Rate of Aerosol Products
D3070 - Standard Test Method of Rapid Pressure Determination of Pressurized Products
D3071 - Standard Test Method for Drop Testing of Glass Aerosol Bottles
D3074 - Standard Test Methods for Pressure in Metal Aerosol Containers
D3075 - Standard Test Method for Overrun of Food Aerosol Products
D3076 - Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
D3078 - Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
D3079 - Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
D3080 - Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3082 - Standard Test Method for Boron In Water
D3084 - Standard Practice for Alpha-Particle Spectrometry of Water
D3087 - Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
D3090 - Standard Practice for Storage Testing of Aerosol Products
D3091 - Standard Practice for Safe Filling of Low-Pressure Pressurized Products
D3092 - Standard Test Method for Particle-Size Distribution of Space-Insecticide Aerosol
D3094 - Standard Test Method for Seepage Rate of Aerosol Products
D3097 - Standard Test Method for Aerosol Products for Delivered Mass
D3103 - Standard Test Method for Thermal Insulation Quality of Packages
D3104 - Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
D3105 - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
D3106 - Standard Test Method for Permanent Deformation of Elastomeric Yarns
D3108 - Standard Test Method for Coefficient of Friction, Yarn to Solid Material
D3111 - Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
D3113 - Standard Test Methods for Sodium Salts of EDTA in Water
D3115 - Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
D3117 - Standard Test Method for Wax Appearance Point of Distillate Fuels
D3120 - Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D3121 - Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
D3122 - Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3123 - Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
D3124 - Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
D3125 - Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
D3128 - Standard Specification for 2-Methoxyethanol
D3130 - Standard Specification for n-Propyl Acetate (96% Grade)
D3131 - Standard Specification for Isopropyl Acetate (99% Grade)
D3132 - Standard Test Method for Solubility Range of Resins and Polymers
D3133 - Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Lacquers by Infrared Spectrophotometry
D3134 - Standard Practice for Establishing Color and Gloss Tolerances
D3135 - Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
D3136 - Standard Terminology Relating to Care Labels for Textile and Leather Products Other Than Textile Floor Coverings and Upholstery
D3137 - Standard Test Method for Rubber Property-Hydrolytic Stability
D3138 - Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139 - Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3141 - Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
D3142 - Standard Test Method for Density of Liquid asphalts (Hydrometer Method)
D3143 - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
D3144 - Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
D3145 - Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D3147 - Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
D3148 - Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
D3149 - Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3150 - Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
D3151 - Standard Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
D3152 - Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus
D3153 - Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
D3154 - Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
D3155 - Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
D3156 - Standard Practice for Rubber-Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
D3157 - Standard Test Method for Rubber from Natural Sources-Color
D3159 - Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
D3160 - Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS ([alpha]-Methylstyrene)
D3161 - Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
D3162 - Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
D3163 - Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
D3164M - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Metric)
D3164 - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D3165 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D3166 - Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
D3167 - Standard Test Method for Floating Roller Peel Resistance of Adhesives
D3168 - Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
D3169 - Standard Specification for Refined Sunflower Oil
D3170 - Standard Test Method for Chipping Resistance of Coatings
D3171 - Standard Test Method for Fiber Content of Resin-Matrix Composites by Matrix Digestion
D3172 - Standard Practice for Proximate Analysis of Coal and Coke
D3173 - Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
D3174 - Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
D3175 - Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
D3176 - Standard Practice for Ultimate Analysis of Coal and Coke
D3177 - Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
D3178 - Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
D3179 - Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
D3180 - Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
D3181 - Standard Guide for Conducting Wear Tests on Textiles
D3182 - Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
D3183 - Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
D3184 - Standard Test Methods for Rubber-Evaluation of NR (Natural Rubber)
D3185 - Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
D3186 - Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
D3187 - Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
D3188 - Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
D3189 - Standard Test Methods for Rubber-Evaluation of Solution BR (Polybutadiene Rubber)
D3190 - Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)
D3191 - Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures
D3192 - Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
D3193 - Standard Specification for Ethylbenzene
D3194 - Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
D3195 - Standard Practice for Rotameter Calibration
D3198 - Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
D3199 - Standard Test Method for Water Vapor Transmission Through Screw-Cap Closure Liners
D3200 - Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
D3201 - Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
D3202 - Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
D3203 - Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
D3204 - Standard Specification for Preformed Cellular Plastic Joint Fillers for Relieving Pressure
D3205 - Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer
D3206 - Standard Test Method for Soil Resistance of Floor Polishes
D3207 - Standard Test Method for Detergent Resistance of Floor Polish Films
D3208 - Standard Specification for Manifold Papers for Permanent Records
D3209 - Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
D3210 - Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
D3212 - Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3213 - Standard Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil
D3214 - Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation
D3215 - Standard Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements
D3217 - Standard Test Methods for Breaking Tenacity of Man-Made Textile Fibers in Loop or Knot Configurations
D3218 - Standard Specification for Polyolefin Monofilaments
D3222 - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
D3223 - Standard Test Method for Total Mercury in Water
D3224 - Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions
D3225 - Standard Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives
D3227 - Standard Test Method for Thiol (Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
D3228 - Standard Test Method for Total Nitrogen In Lubricating Oils and Fuel Oils By Modified Kjeldahl Method
D3230 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
D3231 - Standard Test Method for Phosphorus in Gasoline
D3233 - Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
D3234 - Standard Test Method for Abrasion Resistance of Petroleum Wax Coatings
D3235 - Standard Test Method for Solvent Extractables in Petroleum Waxes
D3236 - Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
D3237 - Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
D3238 - Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
D3239 - Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
D3240 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
D3241 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
D3242 - Standard Test Method for Acidity in Aviation Turbine Fuel
D3244 - Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D3245 - Standard Test Method for Pumpability of Industrial Fuel Oils
D3246 - Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
D3249 - Standard Practice for General Ambient Air Analyzer Procedures
D3251 - Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
D3256 - Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
D3257 - Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
D3258 - Standard Test Method for Porosity of Paint Films
D3259 - Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
D3260 - Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
D3261 - Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3262 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3263 - Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
D3264 - Standard Specification for Industrial Grade Aniline
D3265 - Standard Test Method for Carbon Black-Tint Strength
D3266 - Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) 1,2
D3267 - Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
D3268 - Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method) 1,2
D3269 - Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures)
D3270 - Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) 1,2
D3271 - Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
D3272 - Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
D3273 - Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D3274 - Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
D3275 - Standard Specification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
D3276 - Standard Guide for Painting Inspectors (Metal Substrates)
D3277 - Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
D3278 - Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
D3279 - Standard Test Method for n-Heptane Insolubles
D3280 - Standard Test Methods for Analysis of White Zinc Pigments
D3282 - Standard Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3283 - Standard Specification for Air as an Electrical Insulating Material
D3284 - Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
D3285 - Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
D3286 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter
D3288 - Standard Test Methods for Magnet-Wire Enamels
D3289 - Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
D3290 - Standard Specification for Bond and Ledger Papers for Permanent Records
D3291 - Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
D3294 - Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
D3295 - Standard Specification for PTFE Tubing
D3296 - Standard Specification for FEP-Fluorocarbon Tube
D3299 - Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3300 - Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
D3301 - Standard Specification for File Folders for Storage of Permanent Records
D3302 - Standard Test Method for Total Moisture in Coal
D3305 - Standard Practice for Sampling Small Gas Volume in a Transformer
D3306 - Standard Specification for Ethylene Glycol Base Engine Coolant for Automobile and Light Duty Service
D3307 - Standard Specification forPerfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
D3308 - Standard Specification for PTFE Resin Skived Tape
D3309 - Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
D3310 - Standard Test Method for Determining Corrosivity of Adhesive Materials
D3311 - Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D3312 - Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
D3313 - Standard Test Method for Carbon Black-Individual Pellet Hardness
D3314 - Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
D3316 - Standard Test Method for Stability of Perchloroethylene with Copper
D3319 - Standard Test Method for Accelerated Polishing of Aggregates Using the British Wheel
D3320 - Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3321 - Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
D3322 - Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
D3324 - Standard Practice for Carbon Black-Improving Test Reproducibility Using ASTM Reference Blacks
D3325 - Standard Practice for Preservation of Waterborne Oil Samples
D3326 - Standard Practice for Preparation of Samples for Identification of Waterborne Oils
D3328 - Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
D3329 - Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
D3330/D3330M - Standard Test Methods for Peel Adhesion of Pressure-Sensitive Tape
D3332 - Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
D3333 - Standard Practice for Sampling Man-Made Staple Fibers, Sliver, or Tow for Testing
D3335 - Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
D3336 - Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
D3337 - Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
D3338 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D3339 - Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
D3340 - Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
D3341 - Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
D3342 - Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
D3343 - Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
D3344 - Standard Test Method for Total Wax Content of Corrugated Paperboard
D3345 - Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
D3346 - Standard Test Methods for Rubber Property-Processability of SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer
D3347 - Standard Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide For Use in Sheathed Heating Elements
D3348 - Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
D3349 - Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
D3351 - Standard Test Method for Gel Count of Plastic Film
D3352 - Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
D3353 - Standard Test Methods for Fibrous-Insulated Magnet Wire
D3354 - Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
D3359 - Standard Test Methods for Measuring Adhesion by Tape Test
D3360 - Standard Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments
D3361 - Standard Practice for Operating Light- and Water-Exposure Apparatus (Unfiltered Open-Flame Carbon-Arc Type) for Testing Paint, Varnish, Lacquer, and Related Products Using the Dew Cycle
D3362 - Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
D3363 - Standard Test Method for Film Hardness by Pencil Test
D3364 - Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
D3366 - Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
D3367 - Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
D3368 - Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
D3369 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
D3370 - Standard Practices for Sampling Water from Closed Conduits
D3371 - Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
D3372 - Standard Test Method for Molybdenum in Water
D3373 - Standard Test Method for Vanadium in Water
D3374 - Standard Specification for Vinyl-Coated Glass Yarns
D3375 - Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
D3376 - Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
D3377 - Standard Test Method for Weight Loss of Solventless Varnishes
D3379 - Standard Test Method for Tensile Strength and Young's Modulus for High-Modulus Single-Filament Materials
D3380 - Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
D3381 - Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
D3382 - Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
D3385 - Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3386 - Standard Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
D3387 - Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
D3389 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)
D3393 - Standard Specification for Coated Fabrics-Waterproofness
D3394 - Standard Test Methods for Sampling and Testing Electrical Insulating Board
D3395 - Standard Test Methods for Rubber Deterioration-Dynamic Ozone Cracking in a Chamber
D3398 - Standard Test Method for Index of Aggregate Particle Shape and Texture
D3399 - Standard Specification for General-Purpose Synthetic Detergent Liquid
D3400 - Standard Specification for Liquid Sodium Silicates
D3402 - Standard Test Method for Tumbler Test for Coke
D3403 - Standard Test Methods for Rubber-Evaluation of IR (Isoprene Rubber)
D3404 - Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
D3405 - Standard Specification for Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements
D3406 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
D3409 - Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
D3410/D3410M - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3412 - Standard Test Method for Coefficient of Friction, Yarn to Yarn
D3414 - Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
D3415 - Standard Practice for Identificaiton of Waterborne Oils
D3417 - Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
D3418 - Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
D3419 - Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
D3420 - Standard Test Method for Pendulum Impact Resistance of Plastic Film
D3423 - Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3424 - Standard Test Methods for Evaluating the Lightfastness and Weatherability of Printed Matter
D3426 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
D3427 - Standard Test Method for Air Release Properties of Petroleum Oils
D3429 - Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
D3430 - Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
D3432 - Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography
D3433 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
D3434 - Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
D3436 - Standard Practice for Sampling and Handling Aniline
D3437 - Standard Practice for Sampling and Handling Liquid Cyclic Products
D3438 - Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
D3440 - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
D3441 - Standard Test Method for Deep, Quasi-Static, Cone and Friction-Cone Penetration Tests of Soil
D3442 - Standard Test Method for Gaseous Tritium Content of the Atmosphere
D3443 - Standard Test Method for Chloride in Trichlorotrifluoroethane
D3444 - Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
D3447 - Standard Test Method for Purity of Halogenated Organic Solvents
D3448 - Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
D3450 - Standard Test Method for Washability Properties of Interior Architectural Coatings
D3451 - Standard Practices for Testing Polymeric Powders and Powder Coatings
D3452 - Standard Practice for Rubber-Identification by Pyrolysis-Gas Chromatography
D3453 - Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
D3455 - Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
D3456 - Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
D3457 - Standard Test Method for Preparation of Methyl Esters From Fatty Acids for Determination of Fatty Acid Composition by Gas-Liquid Chromatography
D3458 - Standard Specification for Copies from Office Copying Machines for Permanent Records
D3459 - Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products
D3460 - Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers
D3461 - Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
D3462 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D3464 - Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
D3466 - Standard Test Method for Ignition Temperature of Granular Activated Carbon
D3467 - Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3468 - Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
D3469 - Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
D3470 - Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
D3472 - Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
D3473 - Standard Test Methods for Lifting Force Required to Remove Certain Child-Resistant Snap Caps
D3474 - Standard Practice for The Calibration and Use of Torque Meters Used in Packaging Applications
D3475 - Standard Classification of Child-Resistant Packages
D3477 - Standard Performance Specification for Men's and Boys' Woven Dress Shirt Fabrics
D3479/D3479M - Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D3481 - Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D3482 - Standard Test Method for Determining Electrolytic Corrosion of Copper by Adhesives
D3483 - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
D3484 - Standard Test Methods for Rubber-Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
D3485 - Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D3487 - Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
D3489 - Standard Test Methods for Rubber--Microcellular Urethane
D3492 - Standard Specification for Rubber Contraceptives (Male Condoms)
D3493 - Standard Test Method for Carbon Black-n-Dibutyl Phthalate Absorption Number of Compressed Sample
D3494 - Standard Specification for Water-Emulsion Floor Polish Remover
D3495 - Standard Test Method for Hexane Extraction of Leather
D3496 - Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
D3497 - Standard Test Method for Dynamic Modulus of Asphalt Mixtures
D3498 - Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
D3499 - Standard Test Method for Toughness of Wood-Based Structural Panels
D3500 - Standard Test Methods for Structural Panels in Tension
D3501 - Standard Test Methods for Wood-Based Structural Panels in Compression
D3504 - Standard Specification for Maleic Anhydride
D3505 - Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
D3507 - Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood
D3511 - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
D3512 - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
D3513 - Standard Test Method for Overlength Fiber Content of Man-Made Staple Fiber
D3514 - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
D3515 - Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
D3516 - Standard Test Methods for Ashing Cellulose
D3517 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3518/D3518M - Standard Practice for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +45° Laminate
D3519 - Standard Test Method for Foam in Aqueous Media (Blender Test)
D3520 - Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)
D3521 - Standard Test Method for Surface Wax Coating On Corrugated Board
D3522 - Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing
D3523 - Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
D3524 - Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
D3525 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
D3527 - Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
D3528 - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D3529/D3529M - Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
D3530/D3530M - Standard Test Method for Volatiles Content of Epoxy Matrix Prepreg
D3531 - Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
D3532 - Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D3533 - Standard Method of Rubber-Nitrogen Content
D3534 - Standard Test Method for Polychlorinated Biphenyls (PCBs) in Water
D3535 - Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions
D3539 - Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
D3540 - Standard Specification for Primary Amyl Acetate, Synthetic (98% Grade)
D3541 - Standard Specification for 2-Ethylhexyl Acrylate
D3542 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
D3543 - Standard Test Method for Metal Glide Adhesion
D3544 - Standard Guide for Reporting Test Methods and Results on High Modulus Fibers
D3545 - Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
D3546 - Standard Test Method for Formic Acid in Glacial Acetic Acid
D3547 - Standard Specification for n-Butyl Acrylate
D3548 - Standard Specification for Ethyl Acrylate
D3549 - Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
D3550 - Standard Practice for Ring-Lined Barrel Sampling of Soils
D3551 - Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
D3552/D3552M - Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites
D3553 - Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites
D3554 - Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable
D3555 - Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable
D3556 - Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
D3557 - Standard Test Methods for Cadmium in Water
D3558 - Standard Test Methods for Cobalt in Water
D3559 - Standard Test Methods for Lead in Water
D3561 - Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
D3562 - Standard Performance Specification for Men's and Boys' Woven Dress Topcoat and Dress Overcoat Fabrics
D3564 - Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
D3565 - Standard Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents
D3566 - Standard Practice for Rubber-Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
D3567 - Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3568 - Standard Test Methods for Rubber-Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
D3569 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements
D3571 - Consumer Product Specification for Household Laundry and Dishwasher Water Inlet Hose
D3574 - Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams
D3575 - Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
D3576 - Standard Test Method for Cell Size of Rigid Cellular Plastics
D3577 - Standard Specification for Rubber Surgical Gloves
D3578 - Standard Specification for Rubber Examination Gloves
D3579 - Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
D3580 - Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
D3581 - Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements
D3585 - Standard Specification for ASTM Reference Fluid for Coolant Tests
D3588 - Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
D3590 - Standard Test Methods for Total Kjeldahl Nitrogen in Water
D3591 - Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
D3594 - Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
D3595 - Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
D3596 - Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
D3597 - Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked
D3598 - Standard Test Method for Citrate in Synthetic Detergents
D3601 - Standard Test Method for Foam In Aqueous Media (Bottle Test)
D3603 - Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
D3605 - Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
D3606 - Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
D3607 - Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
D3608 - Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
D3609 - Standard Practice for Calibration Techniques Using Permeation Tubes
D3610 - Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
D3611 - Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
D3612 - Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
D3613 - Standard Test Methods of Sampling Electrical Insulating Oils for Gas Analysis and Determination of Water Content
D3614 - Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
D3616 - Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
D3617 - Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
D3618 - Standard Test Method for Detection of Lead in Paint and Dried Paint Films
D3619 - Standard Specification for Aluminum Silicate Pigments (Anhydrous)
D3620 - Standard Specification for Glacial Acetic Acid
D3622 - Standard Specification for 1-Propanol (n-Propyl Alcohol)
D3623 - Standard Method for Testing Antifouling Panels in Shallow Submergence
D3624 - Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
D3625 - Standard Test Method for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
D3627 - Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
D3628 - Standard Practice for Selection and Use of Emulsified Asphalts
D3629 - Standard Test Method for Rubber Property-Cut Growth Resistance
D3630 - Standard Guide for Determining Constituents Classified as Hazardous Contained in Protective Coatings
D3631 - Standard Test Methods for Measuring Surface Atmospheric Pressure
D3632 - Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
D3633 - Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
D3634 - Standard Test Method for Trace Chloride Ion in Engine Coolants
D3635 - Standard Test Method for Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
D3636 - Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
D3638 - Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
D3639 - Standard Test Method for Classification of Asbestos by Quebec Standard Test
D3641 - Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
D3642 - Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
D3643 - Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
D3644 - Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
D3645 - Standard Test Methods for Beryllium in Water
D3647 - Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
D3648 - Standard Practices for the Measurement of Radioactivity
D3649 - Standard Test Method for High-Resolution Gamma-Ray Spectrometry of Water
D3650 - Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
D3651 - Standard Test Method for Barium in Brackish Water, Seawater, and Brines
D3652/D3652M - Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes
D3654/D3654M - Standard Test Method for Holding Power of Pressure-Sensitive Tapes
D3655 - Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics
D3656 - Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
D3657 - Standard Specification for Zipper Dimensions
D3658 - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
D3659 - Standard Test Method for Flammability of Apparel Fabrics by Semi-Restraint Method
D3663 - Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
D3664 - Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
D3665 - Standard Practice for Random Sampling of Construction Materials
D3666 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Bituminous Paving Materials
D3667 - Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
D3670 - Standard Guide for Determination of Precision and Bias of Methods of Committee D-22
D3673 - Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
D3675 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source
D3676 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
D3677 - Standard Test Methods for Rubber-Identification by Infrared Spectrophotometry
D3678 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3680 - Standard Test Method for Residual Vinyl Chloride Monomer Content of Poly(Vinyl Chloride) Resins, Compounds, and Copolymers by Solution Injection Technique
D3681 - Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3682 - Standard Test Method for Major and Minor Elements in Coal and Coke Ash by Atomic Absorption
D3683 - Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
D3684 - Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
D3685/D3685M - Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
D3686 - Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D3687 - Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
D3689 - Standard Test Method for Individual Piles Under Static Axial Tensile Load
D3690 - Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
D3691 - Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
D3692 - Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings
D3693 - Standard Specification for Labeled Length per Holder of Sewing Thread
D3694 - Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
D3695 - Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
D3696 - Standard Practice for Evaluating an Effluent for Flavor Impairment to Fish Flesh
D3697 - Standard Test Method for Antimony in Water
D3698 - Standard Practice for Solvent Vapor Degreasing Operations
D3699 - Standard Specification for Kerosine
D3700 - Standard Practice for Containing Hydrocarbon Fluid Samples Using a Floating Piston Cylinder
D3701 - Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
D3702 - Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
D3703 - Standard Test Method for Peroxide Number of Aviation Turbine Fuels
D3704 - Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
D3705 - Standard Test Method for Misting Properties of Lubricating Fluids
D3706 - Standard Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test
D3707 - Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
D3708 - Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
D3709 - Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
D3710 - Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
D3711 - Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
D3712 - Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
D3713 - Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame
D3715/D3715M - Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
D3716 - Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
D3717 - Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
D3718 - Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
D3719 - Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels
D3720 - Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-ray Diffraction
D3721 - Standard Specification for Synthetic Red Iron Oxide Pigment
D3722 - Standard Specification for Natural Red and Brown Iron Oxide Pigments
D3723 - Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
D3724 - Standard Specification for Synthetic Brown Iron Oxide Pigment
D3725 - Standard Test Method for Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography
D3728 - Standard Specification for 2-Ethoxyethyl Acetate (99% Grade)
D3730 - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
D3731 - Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
D3732 - Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
D3733 - Standard Test Method for Silicon Content of Silicone Polymers and Silicone-Modified Alkyds by Atomic Absorption
D3734 - Standard Specification for High-Flash Aromatic Naphthas
D3735 - Standard Specification for VM∧P Naphthas
D3737 - Standard Practice for Establishing Stresses for Structural Glued Laminated Timber (Glulam)
D3738 - Standard Specification for Rubber-Coated Cloth Hospital Sheeting
D3739 - Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
D3741 - Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
D3742 - Standard Test Method for 1,1,1-Trichloroethane Content
D3743 - Terminology Relating Terms Relating to Bridge Deck and Substructure Protection
D3744 - Standard Test Method for Aggregate Durability Index
D3745 - Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
D3746 - Standard Test Method for Impact Resistance of Bituminous Roofing Systems
D3747 - Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
D3748 - Standard Practice for Evaluating High-Density Rigid Cellular Thermoplastics
D3749 - Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
D3751 - Standard Practice for Evaluation of Furniture Polish
D3752 - Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
D3753 - Standard Specification for Glass-Fiber-Reinforced Polyester Manholes
D3754 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3755 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
D3756 - Standard Test Method for Evaluation of Resistance To Electrical Breakdown By Treeing In Solid Dielectric Materials Using Diverging Fields
D3757 - Standard Guide for Preparing Specifications for Solvent Floor Polishes
D3758 - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
D3759 - Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
D3760 - Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
D3761 - Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
D3762 - Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D3763 - Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D3764 - Standard Practice for Validation of Process Stream Analyzers
D3765 - Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
D3766 - Standard Terminology Relating to Catalysts and Catalysis
D3767 - Standard Practice for Rubber-Measurement of Dimensions
D3768 - Standard Test Method for Microcellular Urethanes--Flexural Recovery
D3769 - Standard Test Method for Microcellular Urethanes--High Temperature Sag
D3771 - Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
D3772 - Standard Specification for Rubber Finger Cots
D3773 - Standard Test Methods for Length of Woven Fabric
D3774 - Standard Test Methods for Width of Textile Fabric
D3775 - Standard Test Method for Fabric Count of Woven Fabric
D3776 - Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
D3777 - Standard Practice for Writing Specifications for Textiles
D3779 - Standard Performance Specification for Women's and Girls' Woven Rainwear and All-Purpose, Water-Repellent Coat Fabrics
D3780 - Standard Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
D3781 - Standard Performance Specification for Men's and Boys' Knitted Rainwear and All-Purpose, Water-Repellent Coat Fabrics
D3782 - Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics
D3783 - Standard Performance Specification for Woven Flat Lining Fabrics for Men's and Boys' Apparel
D3784 - Standard Performance Specification for Men's and Boys' Woven Bathrobe and Dressing Gown Fabrics
D3785 - Standard Performance Specification for Woven Necktie and Scarf Fabrics
D3790 - Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
D3791 - Standard Practice for Evaluating the Effects of Heat on Asphalts
D3792 - Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D3793 - Standard Test Method for Low-Temperature Coalescence of Latex Paint Films
D3794 - Standard Guide for Testing Coil Coatings
D3795 - Standard Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer
D3796 - Standard Practice for Calibration of Type S Pitot Tubes
D3797 - Standard Test Method for Analysis of o-Xylene by Gas Chromatography
D3798 - Standard Test Method for Analysis of p-Xylene by Gas Chromatography
D3799 - Standard Test Method for Purity of Styrene by Freezing Point Method
D3800 - Standard Test Method for Density of High-Modulus Fibers
D3801 - Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3802 - Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3803 - Standard Test Method for Nuclear-Grade Activated Carbon
D3804 - Standard Test Method for Iron in Paint Driers by EDTA Method
D3806 - Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
D3807 - Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
D3808 - Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
D3809 - Standard Method of Testing Synthetic Dielectric Fluids For Capacitors
D3810 - Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
D3811/D3811M - Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
D3813/D3813M - Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
D3814 - Standard Guide for Locating Combustion Test Methods for Polymeric Materials
D3815/D3815M - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus
D3816/D3816M - Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
D3819 - Standard Performance Specification for Men's and Boys' Woven Pajama Fabrics
D3820 - Standard Performance Specification for Men's and Boys' Woven Underwear Fabrics
D3822 - Standard Test Method for Tensile Properties of Single Textile Fibers
D3823 - Standard Practice for Determining Ticket Numbers for Sewing Threads
D3824 - Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
D3825 - Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
D3826 - Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
D3827 - Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
D3828 - Standard Test Methods for Flash Point by Small Scale Closed Tester
D3829 - Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
D3831 - Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
D3832 - Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
D3833/D3833M - Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
D3835 - Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
D3836 - Standard Practice for Evaluation of Automotive Polish
D3837 - Standard Practice for Preparing a Solution of Alkali-Soluble Resins
D3838 - Standard Test Method for pH of Activated Carbon
D3839 - Standard Practice for Underground Installation of "Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe
D3840 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841 - Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3843 - Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D3844 - Standard Guide for Labeling Halogenated Hydrocarbon Solvent Containers
D3845 - Standard Specification for Glacial Methacrylic Acid
D3846 - Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
D3847 - Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
D3848 - Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
D3849 - Standard Test Method for Carbon Black - Primary Aggregate Dimensions from Electron Microscope Image Analysis
D3850 - Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D3851 - Standard Specification for Urethane Microcellular Shoe Soling Materials
D3852 - Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
D3853 - Standard Terminology Relating to Rubber and Rubber Latices-Abbreviations for Chemicals Used in Compounding
D3854 - Standard Test Method for Rubber Thread-Resistance to Dry Heat
D3855 - Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment
D3856 - Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
D3858 - Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
D3859 - Standard Test Methods for Selenium in Water
D3860 - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D3861 - Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
D3862 - Standard Test Method for Retention Characteristics of 0.2-[mu]m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3863 - Standard Test Method for Retention Characteristics of 0.40 to 0.45-[mu]m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3864 - Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
D3865 - Standard Test Method for Plutonium in Water
D3866 - Standard Test Methods for Silver in Water
D3867 - Standard Test Methods for Nitrite-Nitrate in Water
D3868 - Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
D3869 - Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
D3870 - Standard Practice for Establishing Performance Characteristics for Colony Counting Methods in Microbiology
D3871 - Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
D3872 - Standard Test Method for Ferrous Iron in Iron Oxides
D3873 - Standard Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Arsenate Solutions
D3874 - Standard Test Method for Ignition of Materials by Hot Wire Sources
D3875 - Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
D3876 - Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography
D3877 - Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
D3878 - Standard Terminology Composite Materials
D3879 - Standard Test Method for Sampling Amphibole Asbestos
D3880 - Standard Test Method for Asbestos Strength Units
D3882 - Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
D3883 - Standard Test Method for Yarn Crimp or Yarn Takeup in Woven Fabrics
D3884 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
D3885 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
D3886 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Method)
D3887 - Standard Specification for Tolerances for Knitted Fabrics
D3888 - Standard Terminology Relating to Open-End Spinning
D3889/D3889M - Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
D3891 - Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
D3892 - Standard Practice for Packaging/Packing of Plastics
D3893 - Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
D3895 - Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D3896 - Standard Practice for Rubber From Synthetic Sources-Sampling
D3897 - Standard Practice for Calculation of Basicity of Chrome Tanning Liquors
D3898 - Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
D3899 - Standard Specification for Rubber Contraceptives-Vaginal Diaphragms
D3900 - Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
D3902 - Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
D3903 - Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
D3905 - Standard Specification for Toilet Tissue for Industrial and Institutional Use
D3906 - Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
D3907 - Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
D3908 - Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
D3909 - Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
D3910 - Standard Practices for Design, Testing, and Construction of Slurry Seal
D3911 - Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D3912 - Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants
D3913 - Standard Test Method for Acidity in Basic Chromium Tanning Liquors
D3914 - Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
D3915 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
D3916 - Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D3917 - Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
D3918 - Standard Terminology Relating to Reinforced Plastic Pultruded Products
D3919 - Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
D3920 - Standard Test Method for Strontium in Water
D3921 - Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
D3923 - Standard Practices for Detecting Leaks in Reverse Osmosis Devices
D3924 - Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
D3925 - Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
D3926 - Standard Test Method for Percent Solids in Titanium Dioxide Slurries
D3928 - Standard Test Method for Evaluation of Gloss or Sheen Uniformity
D3929 - Standard Test Method for Evaluating the Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
D3930 - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
D3931 - Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
D3933 - Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D3934 - Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
D3935 - Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
D3936 - Standard Test Method for Resistance to Delamination of the Secondary Backin of Pile Yarn Floor covering
D3937 - Standard Test Method for Crimp Frequency of Man-Made Staple Fibers
D3938 - Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Consumer Products
D3939 - Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method)
D3941 - Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
D3942 - Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
D3943 - Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
D3944 - Standard Test Method for Solidification Point of Petroleum Wax
D3946 - Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metalworking Fluids
D3948 - Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
D3949 - Standard Specification for Coated Glass Fabrics Used for Electrical Insulation
D3950 - Standard Specification for Strapping, Nonmetallic (and Joining Methods)
D3951 - Standard Practice for Commercial Packaging
D3953 - Standard Specification for Strapping, Flat Steel and Seals
D3954 - Standard Test Method for Dropping Point of Waxes
D3955 - Standard Specification for Electrical Insulating Varnishes
D3956 - Standard Specification for Methane Thermophysical Property Tables
D3957 - Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
D3958 - Standard Test Methods for Rubber Evaluation of BIIR and CIIR (Halogenated Isobutene-Isoprene Rubber)
D3959 - Standard Test Method for Rubber- and Plastic-Coated Fabrics-Discoloration Sensitivity to Tobacco Smoke
D3960 - Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D3961 - Standard Test Method for Trace Quantities of Sulfur in Liquid Aromatic Hydrocarbons by Oxidative Microcoulometry
D3963/D3963M - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Reinforcing Steel Bars
D3964 - Standard Practice for Selection of Coating Specimens for Appearance Measurements
D3965 - Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3966 - Standard Test Method for Piles Under Lateral Loads
D3967 - Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3968 - Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
D3969 - Standard Test Method for Zirconium in Paint Driers by EDTA Method
D3970 - Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
D3971 - Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
D3972 - Standard Test Method for Isotopic Uranium in Water by Radiochemistry
D3973 - Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
D3974 - Standard Practices for Extraction of Trace Elements from Sediments
D3975 - Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
D3976 - Standard Practice for Preparation of Sediment Samples for Chemical Analysis
D3977 - Standard Test Methods for Determining Sediment Concentration in Water Samples
D3978 - Standard Practice for Algal Growth Potential Testing with Selenastrum Capricornutum
D3981 - Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
D3982 - Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
D3983 - Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
D3984 - Standard Specification for Ethane Thermophysical Property Tables
D3985 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
D3986 - Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
D3987 - Standard Test Method for Shake Extraction of Solid Waste with Water
D3988 - Standard Test Method for Vanadium in Paint Driers by EDTA Method
D3989 - Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
D3990 - Standard Terminology Relating to Fabric Defects
D3991 - Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade
D3992 - Standard Specification for Wool Top or Mohair Top and Assignment of Grade
D3994 - Standard Performance Specification for Woven Swimwear Fabrics
D3995 - Standard Performance Specification for Men's and Women's Knitted Career Apparel Fabrics Dress and Vocational
D3996 - Standard Performance Specification for Knit Swimwear Fabrics
D3997 - Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
D3999 - Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4000 - Standard Classification System for Specifying Plastic Materials
D4001 - Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
D4002 - Standard Practice for Evaluation of Buffable Shoe Polish
D4003 - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
D4004 - Standard Test Methods for Rubber-Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
D4005 - Standard Test Method for Plastic-Coated Fabrics-Completeness of Fusion of PVC Dispersion Coatings
D4006 - Standard Test Method for Water in Crude Oil by Distillation
D4007 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
D4008 - Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)
D4009 - Standard Guide for Foam Stability of Hand Dishwashing Detergents
D4010 - Standard Specification for Waterless Hand Cleaner
D4011 - Standard Specification for Lotion Soap
D4012 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
D4013 - Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
D4014 - Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
D4015 - Standard Test Methods for Modulus and Damping of Soils by the Resonant-Column Method
D4016 - Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4017 - Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D4018 - Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
D4019 - Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide
D4020 - Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
D4022 - Standard Specification for Coal Tar Roof Cement, Asbestos Containing
D4023 - Standard Terminology Terms Relating to Humidity Measurements
D4024 - Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4025 - Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
D4026 - Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
D4027 - Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
D4028 - Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
D4029 - Standard Specification for Finished Woven Glass Fabrics
D4030 - Standard Specification for Glass Fiber Cord and Sewing Thread
D4031 - Standard Test Method for Bulk Properties of Textured Yarns
D4032 - Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
D4033 - Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Upholstery Fabrics (Dynamic Fatigue Method)
D4034 - Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics
D4035 - Standard Performance Specification for Knitted Necktie and Scarf Fabrics
D4037 - Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics
D4038 - Standard Performance Specification for Women's and Girls' Woven Dress and Blouse Fabrics
D4039 - Standard Test Method for Reflection Haze of High-Gloss Surfaces
D4040 - Standard Test Method for Viscosity of Printing Inks and Vehicles by the Falling-Rod Viscometer
D4042 - Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
D4043 - Standard Guide for Selection of Aquifer-Test Method in Determining of Hydraulic Properties by Well Techniques
D4044 - Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
D4045 - Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
D4046 - Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
D4047 - Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
D4048 - Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
D4049 - Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
D4050 - Standard Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4051 - Standard Practice for Preparation of Low-Pressure Gas Blends
D4052 - Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
D4053 - Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
D4054 - Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials
D4055 - Standard Test Method for Pentane Insolubles by Membrane Filtration
D4056 - Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
D4057 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4058 - Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
D4059 - Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4061 - Standard Test Method for Retroreflectance of Horizontal Coatings
D4062 - Standard Test Method for Leveling of Paints by Draw-Down Method
D4063 - Standard Specification for Electrical Insulating Board
D4064 - Standard Practice for Preservative Treatment of Utility Poles by the Thermal Process
D4065 - Standard Practice for Determining and Reporting Dynamic Mechanical Properties of Plastics
D4066 - Standard Classification System for Nylon Injection and Extrusion Materials (PA)
D4067 - Standard Specification for Reinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding and Extrusion Materials
D4068 - Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4069 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4070 - Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
D4071 - Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
D4072 - Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
D4073 - Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
D4074 - Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
D4075 - Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
D4077 - Standard Specification for Cumene (Isopropylbenzene)
D4078 - Standard Specification for Water Emulsion Floor Polish
D4079 - Standard Specification for Vapor-Degreasing Grade Methylene Chloride
D4080 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
D4081 - Standard Specification for Drycleaning-Grade Perchloroethylene
D4082 - Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
D4083 - Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4084 - Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
D4085 - Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
D4086 - Standard Practice for Visual Evaluation of Metamerism
D4088 - Standard Practice for Preparation for Shipment of Solid Electrical Insulating Materials
D4092 - Standard Terminology Relating to Dynamic Mechanical Measurements on Plastics
D4093 - Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
D4094 - Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
D4095 - Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
D4096 - Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
D4097 - Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4101 - Standard Specification for Propylene Plastic Injection and Extrusion Materials
D4102 - Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
D4103 - Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
D4104 - Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105 - Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106 - Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4107 - Standard Test Method for Tritium in Drinking Water
D4109 - Standard Performance Specification for Men's and Boys' Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics
D4110 - Standard Performance Specification for Men's and Boys' Knitted Bathrobe, Dressing Gown, and Pajama Fabrics
D4111 - Standard Performance Specification for Woven Napery and Tablecloth Fabrics Household and Institutional
D4112 - Standard Performance Specification for Woven Umbrella Fabrics
D4113 - Standard Performance Specification for Woven Slipcover Fabrics
D4114 - Standard Performance Specification for Woven Flat Lining Fabrics for Women's and Girls' Apparel
D4115 - Standard Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics
D4116 - Standard Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination Fabrics
D4117 - Standard Performance Specification for Women's and Girls' Woven Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics
D4118 - Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics
D4119 - Standard Performance Specification for Men's and Boys' Knitted Dress Shirt Fabrics
D4120 - Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
D4122 - Standard Practice for Carbon Black-Evaluation of an Industry Reference Black
D4123 - Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
D4124 - Standard Test Methods for Separation of Asphalt into Four Fractions
D4125 - Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
D4126 - Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
D4127 - Standard Terminology Used with Ion-Selective Electrodes
D4128 - Standard Practice for Identification of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
D4129 - Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
D4130 - Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
D4131 - Standard Practice for Sampling Fish with Rotenone
D4132 - Standard Practice for Sampling Phytoplankton with Conical Tow Nets
D4133 - Standard Practice for Sampling Phytoplankton with Pumps
D4134 - Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
D4135 - Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
D4136 - Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
D4137 - Standard Practice for Preserving Phytoplankton Samples
D4138 - Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
D4139 - Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
D4140 - Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
D4141 - Standard Practice for Conducting Accelerated Outdoor Exposure Tests of Coatings
D4142 - Standard Guide for Testing Epoxy Resins
D4143 - Standard Guide for Testing Latex Vehicles
D4144 - Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
D4145 - Standard Test Method for Coating Flexibility of Prepainted Sheet
D4146 - Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
D4147 - Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
D4148 - Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method
D4149 - Standard Classification for Sampling Phytoplankton in Surface Waters
D4150 - Standard Terminology Relating to Gaseous Fuels
D4151 - Standard Test Method for Flammability of Blankets
D4153 - Standard Performance Specification for Men's, Women's, and Children's Woven Handkerchief Fabrics
D4154 - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
D4155 - Standard Performance Specification for Women's and Girls' Woven Sportswear, Shorts, Slacks, and Suiting Fabrics
D4156 - Standard Performance Specification for Women's and Girls' Knitted Sportswear Fabrics
D4157 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
D4158 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Uniform Abrasion Method)
D4161 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
D4165 - Standard Test Method for Cyanogen Chloride in Water
D4166 - Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument
D4167 - Standard Specification for Fiber-Reinforced Plastic Fans and Blowers
D4168 - Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
D4169 - Standard Practice for Performance Testing of Shipping Containers and Systems
D4170 - Standard Test Method for Fretting Wear Protection by Lubricating Greases
D4171 - Standard Specification for Fuel System Icing Inhibitors
D4172 - Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
D4174 - Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
D4175 - Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
D4176 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4177 - Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
D4178 - Standard Practice for Calibrating Moisture Analyzers
D4179 - Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
D4181 - Standard Specification for Acetal (POM) Molding and Extrusion Materials
D4182 - Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
D4185 - Standard Practice for Measurement of Metals in Workplace Atmosphere by Atomic Absorption Spectrophotometry
D4186 - Standard Test Method for One-Dimensional Consolidation Properties of Soils Using Controlled-Strain Loading
D4188 - Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
D4189 - Standard Test Method for Silt Density Index (SDI) of Water
D4190 - Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
D4191 - Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
D4192 - Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
D4193 - Standard Test Method for Thiocyanate in Water
D4194 - Standard Test Methods for Operating Characteristics of Reverse Osmosis Devices
D4195 - Standard Guide for Water Analysis for Reverse Osmosis Application
D4196 - Standard Test Method for Confirming the Sterility of Membrane Filters
D4198 - Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
D4199 - Standard Test Methods for Autoclavability of Membrane Filters
D4200 - Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
D4201 - Standard Test Method for Coliphages in Water
D4203 - Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D4204 - Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D4206 - Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
D4208 - Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
D4209 - Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
D4210 - Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data
D4211 - Classification for Fish Sampling
D4212 - Standard Test Method for Viscosity by Dip-Type Viscosity Cups
D4213 - Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
D4214 - Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4215 - Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
D4216 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds
D4217 - Standard Test Method for Gel Time of Thermosetting Coating Powder
D4218 - Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
D4219 - Standard Test Method for Unconfined Compressive Strength Index of Chemical-Grouted Soils
D4220 - Standard Practices for Preserving and Transporting Soil Samples
D4221 - Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
D4223 - Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
D4225 - Standard Specification for Styrene-Butadiene Sheeting
D4226 - Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4227 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D4230 - Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
D4232 - Standard Performance Specification for Men's and Women's Dress and Vocational Career Apparel Fabrics
D4233 - Standard Performance Specification for Women's and Girls' Knitted and Woven Brassiere Fabrics
D4234 - Standard Performance Specification for Women's and Girls' Knitted Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics
D4235 - Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics
D4236 - Standard Practice for Labeling Art Materials for Chronic Health Hazards
D4239 - Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
D4241 - Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems
D4242 - Standard Test Method for Glass Plate Flow for Thermosetting Coating Powders
D4243 - Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
D4244 - Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
D4245 - Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
D4246 - Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
D4247 - Standard Specification for General-Purpose, Black Heavy-Duty, and Black Extra-Heavy-Duty Crosslinked Polychloroprene Jackets For Wire and Cable
D4248 - Standard Practice for Design of Steam Turbine Generator Oil Systems
D4249 - Standard Test Method for Enumeration of Candida albicans in Water
D4250 - Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products
D4251 - Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
D4252 - Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
D4253 - Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254 - Standard Test Method for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4255/D4255M - Standard Guide for Testing In-plane Shear Properties of Composite Laminates
D4258 - Standard Practice for Surface Cleaning Concrete for Coating
D4259 - Standard Practice for Abrading Concrete
D4260 - Standard Practice for Acid Etching Concrete
D4261 - Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating
D4262 - Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263 - Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4265 - Standard Guide for Evaluating Stain Removal Performance in Home Laundering
D4266 - Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
D4267 - Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
D4268 - Standard Test Methods for Testing Fiber Ropes
D4270 - Standard Guide for Using Existing Practices in Developing and Writing Test Methods
D4271 - Standard Practice for Writing Statements on Sampling in Test Methods for Textiles
D4272 - Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
D4273 - Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
D4274 - Standard Test Methods for Testing Polyurethane Raw Materials Determination of Hydroxyl Numbers of Polyols
D4275 - Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
D4276 - Standard Practice for Confined Area Entry
D4277 - Standard Guide for Testing Amino Resins
D4278 - Standard Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
D4279 - Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
D4280 - Standard Specification for Extended Life Type, Nonplowable, Prismatic, Raised, Retroreflective Pavement Markers
D4281 - Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
D4282 - Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
D4283 - Standard Test Method for Viscosity of Silicone Fluids
D4284 - Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
D4285 - Standard Test Method for Indicating Oil or Water in Compressed Air
D4286 - Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4287 - Standard Test Method for High-Shear Viscosity Using the ICI Cone/Plate Viscometer
D4288 - Standard Specification for Calcium Borosilicate Pigments
D4289 - Standard Test Method for Compatibility of Lubricating Grease with Elastomers
D4290 - Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
D4291 - Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
D4292 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
D4293 - Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
D4294 - Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
D4295 - Standard Classification for Rubber Compounding Materials-Zinc Oxide
D4296 - Standard Practice for Sampling Pitch
D4297 - Standard Practice for Sampling and Handling Bisphenol A (4,4`-Isopropylidinediphenol)
D4298 - Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
D4300 - Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
D4301 - Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
D4302 - Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
D4303 - Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
D4304 - Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
D4305 - Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
D4306 - Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
D4308 - Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
D4309 - Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
D4310 - Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
D4311 - Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
D