Work Item: ASTM WK41893 -
Revision of C114 - 11b Standard Test Methods for Chemical Analysis of Hydraulic Cement
(What is a Work Item?)
Active Standard: C114 - 13
Developed by Subcommittee: C01.23 | Committee C01 | Contact Staff Manager
It is known that the use of porcelain crucibles yields results that are within the limits set in Table 1 of ASTM C114. Discussion during December 2012 subcommittee indicated the material post ignition cannot be used for other testing but was acceptable for loss on ignition of Portland cement. This will eliminate the need for qualification as a rapid method using porcelain crucibles for determining loss on ignition.
chemical analysis; compositional analysis; hydraulic cements; Alkalies content--cement; Aluminum oxide (Al2O3) content; Ammonium hydroxide content; Calcium oxide (CaO) content; Chemical analysis--cement/concrete/aggregate; Chloroform-soluble organic substances content; Hydraulic cement concrete; Insoluble matter content; Insoluble residue content; Iron oxide content; Loss on ignition (LOI); Magnesium oxide (MgO) content; Manganic oxide content; Optional methods; Organic matter content; Phosphorus pentoxide content; Portland cement; Potassium oxide (K2O) content; Rapid testing; Referee methods; Residue; Silicon dioxide (SiO2) content; Sodium oxide (Na2O) content; Spectrophotometry--flame photometry; Sulfide content; Sulfur trioxide (SO3); Tallow content; Titanium dioxide (TiO2) content; Vinsol resin content; Water-soluble-matter content;
Back to Top