Active Standard: A182 / A182M - 13a
ASTM A240 and A249 have a nitrogen range of .18/.25 for grade UNS S31254. This specification has a range for the same grade of .18/.22. The benefits of nitrogen in 6 Moly grades is well understood. Higher nitrogen is beneficial to corrosion resistance and increases strength levels. Further, in this particular grade, the higher nitrogen range allows a melt code to be designed so that it solidifies in the totally austenitic mode. Solidifying in the totally austenitic mode eliminates formation of delta ferrite during casting and solidification. Delta ferrite can later transform into deleterious phases like sigma that are detrimental to corrosion resistance and impact strength. Allowing higher nitrogen levels is beneficial to the material. Hence, we propose to raise the nitrogen limit in this specification to .25 to match ASTM A240 and A249.
Keywordsaustenitic stainless steel; chromium alloy steel; chromium-molybdenum steel; ferritic/austenitic stainless steel; ferritic stainless steel; martensitic stainless steel; nickel alloy steel; notch toughness requirements; pipe fittings; piping applications; pressure containing parts; stainless steel fittings; stainless steel forgings; steel; steel flanges; steel forgings, alloy; steel valves; temperature service applications, elevated; temperature service applications, high; wrought material ;
Ballot Item Approved as A182/A182M-2013A and Pending Publication