ASTM WK30666

    Work Item: ASTM WK30666 - Revision of D6138 - 07 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    (What is a Work Item?)

    Active Standard: D6138 - 13

    Developed by Subcommittee: D02.G0.06 | Committee D02 | Contact Staff Manager



    1. Rationale

    The revision of the bearing fill based on volume will bring the test method back in line with the IP method which is the procedure used when creating the research report. The precision of the ASTM test method is based entirely on IP220/93. The 1993 version of the method states to fill a bearing with 9.5 +/- 0.1 ml of grease. This will ensure consistent fill with grease based on calcium sulfonate thickeners and PFPE based lubricants. Also, revised to add ordering information for a bearing packer used with the test.


    Keywords

    corrosion; Emcor test; lubricating grease; rust;
    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    10-18-2010

    Technical Contact:
    Brian Kusak

    Status:
    Draft Under Development