ASTM WK25980

    Work Item: ASTM WK25980 - Revision of D86 - 09e1 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    (What is a Work Item?)

    Active Standard: D86 - 12

    Developed by Subcommittee: D02.08 | Committee D02 | Contact Staff Manager



    1. Rationale

    ASTM International Committee D02 and the Energy Institute (formerly the Institute of Petroleum) Test Methods Standardization (TMS) Committee have a long history of cooperation and have developed a number of joint and/or technically equivalent standards and interlaboratory study programs. Both ASTM and EI participated in the interlaboratory study which produced RR:D02-1621, which is the basis for the precision stated in D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure, with the intent that this was a joint program, as discussed at meetings during the design of the interlaboratory study. In prior years ASTM D86 and IP 123 have been joint methods, but have drifted apart due to revisions which were not harmonized. These differences are being resolved. During the conduct of the RR:D02-1621 both ASTM and EI were progressing through their separate balloting processes, with the intent that they would eventually be jointed. ASTM and EI have now developed a formal guideline for how this jointing process is to occur, which is the reason for this ballot. The guidelines outline that should the two organizations desire to work towards a joint standard or interlaboratory study than each organization should proceed through an approval process. For ASTM that requires a 2/3 approval of the subcommittee members, at a meeting or by letter ballot, and then approval of the committees executive subcommittee. Since this approval process is somewhat behind schedule, as the jointing agreement and development work had already been established prior to the new guidelines, it appears that the prudent course is to letter ballot the approval of the subcommittee now, for anticipated submission for approval of the executive subcommittee at the upcoming meeting in December 2009.


    Keywords

    batch distillation; distillates; distillation; laboratory distillation; petroleum products; Atmospheric distillation; Batch distillation; Distillation--petroleum products; Laboratory distillation process; Petroleum products;
    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    10-09-2009

    Technical Contact:
    Michael Collier

    Status:
    Draft Under Development