ASTM WK23032

    Revision of A792 / A792M - 08 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    (What is a Work Item?)

    Active Standard: A792 / A792M - 10

    Developed by Subcommittee: A05.11 | Committee A05 | Contact Staff Manager



    WK23032

    1. Rationale

    Currently the General Requirements specification A924/A924M includes 2 tables of thickness tolerances, one for thickness measurements taken 3/8 inches from the edge and one for measurements taken 1 inch from the edge.The product specification requires the user to specify which applies to the order, The requirements has created some confusion. This proposed revision will eliminate the confusion by removing the table of thickness tolerance for measurements taken 3/8 inches from the edge from A924/A924M and adding it to the product specification as a Supplementary Requirement.


    Keywords

    coatings, metallic; 55 % aluminum-zinc alloy coating; steel sheet, metallic coated; Alloy steel sheet/strip--specifications; Aluminum-coated steel sheet--specifications; Aluminum-zinc alloy-coated steel--specifications; Hot-dip processed coatings--specifications; Metallic steel sheet--secifications; Zinc-coated steel sheet--specifications;
    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    02-16-2009

    Technical Contact:
    Donald Mongeon

    Status:
    Draft Under Development