ASTM WK10741

    Work Item: ASTM WK10741 - New Determination of Methanol in Propane by Gas Chromatography and Flame Ionization Detection

    (What is a Work Item?)

    Developed by Subcommittee: D02.H0 | Committee D02 | Contact Staff Manager



    1. Scope

    This test method covers the gas chromatographic procedure for the quantitative determination of methanol in propane by multidimensional gas chromatography and flame ionization detection. This method is applicable when the hydrocarbon matrices have a final boiling point less than 200 degrees Celsius. Oxygenates which may be analyzed include, but are not limited to, those listed in Table 1. The linear working range for methanol is 1 mg/kg to 500 mg/kg mass. Methanol in Propane is the goal of this standard.

    This standard is needed for quality control and custody transfer of Propane in the LPG industry.


    Keywords

    Oxygenates

    The title and scope are in draft form and are under development within this ASTM Committee.

    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    3-11-2006

    Technical Contact:
    Alliee Taylor

    Status:
    Draft Under Development