Standard Withdrawn, No replacement   Last Updated: Mar 02, 2021 Track Document
ASTM D5328-92(1997)

Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)

Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001) D5328-92R97 ASTM|D5328-92R97|en-US Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001) Standard new BOS Vol. 06.02 Committee D01
$ 0.00 Out of stock

Scope

1.1 This test method covers the determination of the volatile organic compound (VOC40) content of non-heatset printing ink systems of the paste type using a baking cycle of 1 h at 40°C.

1.2 This test method is applicable to paste printing inks and vehicles that dry primarily by absorption, polymerization, or related means without the application of heat. Such systems do not contain appreciable quantities of low-boiling solvents that evaporate readily at ordinary room temperatures.

Note 1-The 40°C baking temperature in this test method is the same as that specified in Bay Area Method 30. The temperature of heating is 110°C in several related test methods, for example, D2369, D4713 and EPA Reference Method 24. VOC determinations are reviewed in ASTM Manual Series MNL 4.

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Language unavailable
Format unavailable
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center