Withdrawn Rationale:
This specification defines the size composition and surface preparation requirements for test samples used to evaluate coatings according to the following ASTM test procedures.
Formerly under the jurisdiction of Committee D33 on Protective Coating and Lining Work for Power Generation Facilities, this specification was withdrawn in January 2010 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
1. Scope
1.1 This specification defines the size composition and surface preparation requirements for test samples used to evaluate coatings according to the following ASTM test procedures.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A36/A36M Specification for Carbon Structural Steel
C33/C33M Specification for Concrete Aggregates
C150/C150M Specification for Portland Cement
C192/C192M Practice for Making and Curing Concrete Test Specimens in the Laboratory
C260 Specification for Air-Entraining Admixtures for Concrete
C494/C494M Specification for Chemical Admixtures for Concrete
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
D3912 Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants
D4258 Practice for Surface Cleaning Concrete for Coating
D4259 Practice for Abrading Concrete
D4260 Practice for Liquid and Gelled Acid Etching of Concrete
D4541 Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
American Concrete Institute
ACI308 Guide to Curing Concrete
Index Terms
concrete blocks; nuclear power plants; qualification testing; sample preparation; steel samples; test samples;
DOI: 10.1520/D5139-90R01
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
