B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments

F746 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

F1875 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface

F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

G119 Standard Guide for Determining Synergism Between Wear and Corrosion

G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems

G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete

G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

G199 Standard Guide for Electrochemical Noise Measurement