ASTM G154 - 12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C1184 Standard Specification for Structural Silicone Sealants

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1775 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light

    D925 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

    D2737 Standard Specification for Polyethylene (PE) Plastic Tubing

    D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3794 Standard Guide for Testing Coil Coatings

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D4799/D4799M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D5208 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

    D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

    D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

    D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes

    D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes

    D7745 Standard Practice for Testing Pultruded Composites

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

    E2556/E2556M Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

    F520 Standard Test Method for Environmental Resistance of Aerospace Transparencies

    F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

    F883 Standard Performance Specification for Padlocks

    F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

    F1945 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

    F2157 Standard Specification for Synthetic Surfaced Running Tracks

    F2286 Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas

    F2947/F2947M Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2957 Standard Specification for Ornamental Aluminum Fence Systems

    G141 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials

    G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

    G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials

    G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial

    G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D3980 Practice for Interlaboratory Testing of Paint and Related Materials

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    G53 Practice for Operating Light-and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials

    G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

    G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources