ASTM F538 - 13 Standard Terminology Relating to the Characteristics and Performance of Tires


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    E867 Standard Terminology Relating to Vehicle-Pavement Systems

    E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

    F377 Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

    F408 Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer

    F414 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger

    F421 Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires

    F457 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation

    F551/F551M Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires

    F559 Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

    F724 Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

    F762/F762M Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires

    F811 Standard Practice for Accelerometer Use in Vehicles for Tire Testing

    F870 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

    F1016 Standard Practice for Linear Tire Treadwear Data Analysis

    F1035 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System

    F1112 Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

    F1364 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

    F1502 Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

    F1572 Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces

    F1649 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

    F1650 Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

    F1805 Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

    F1806 Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use

    F1922 Standard Test Method for Tires, Pneumatic, Vehicular, Highway

    F1923 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway

    F1971 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench

    F2493 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire

    F2663 Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR of 4536 kg (10 000 lb) or Less

    F2779 Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface

    F2803 Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels

    F2838 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation

    F2869 Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface

    F2870 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

    F2871 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

    F2872 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire

    F3015 Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    There are currently no reference documents for this standard.