ASTM F477 - 14 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D5685 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D6783 Standard Specification for Polymer Concrete Pipe

    F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

    F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

    F894 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

    F949 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

    F1336 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1483 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

    F1488 Standard Specification for Coextruded Composite Pipe

    F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe

    F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

    F1760 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

    F1803 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

    F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

    F1901 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

    F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

    F1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

    F1987 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

    F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

    F2435 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

    F2510/F2510M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

    F2562/F2562M Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

    F2649 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

    F2736 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

    F2737 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units

    F2762 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2763 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2764/F2764M Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

    F2768 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components

    F2881 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

    F2946 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

    F2947/F2947M Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D395 Test Methods for Rubber Property--Compression Set

    D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension

    D471 Test Method for Rubber Property--Effect of Liquids

    D518 Test Method for Rubber Deterioration--Surface Cracking

    D573 Test Method for Rubber--Deterioration in an Air Oven

    D883 Terminology Relating to Plastics

    D1149 Test Methods for Rubber Deterioration--Cracking in an Ozone Controlled Environment

    D1229 Test Method for Rubber Property--Compression Set at Low Temperatures

    D1349 Practice for Rubber--Standard Conditions for Testing

    D1414 Test Methods for Rubber O-Rings

    D1415 Test Method for Rubber Property--International Hardness

    D1566 Terminology Relating to Rubber

    D2240 Test Method for Rubber Property--Durometer Hardness

    F913 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe