ASTM F1155 - 10 Standard Practice for Selection and Application of Piping System Materials


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    F1273 Standard Specification for Tank Vent Flame Arresters

    F1311 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

    F1386 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

    F1994 Standard Test Method for Shipboard Fixed Foam Firefighting Systems

    F2283 Standard Specification for Shipboard Oil Pollution Abatement System

    F2363/F2363M Standard Specification for Sewage and Graywater Flow Through Treatment Systems


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A105/A105M Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A134 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A139/A139M Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A178/A178M Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A192/A192M Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A213/A213M Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A216/A216M Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A234/A234M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A242/A242M Specification for High-Strength Low-Alloy Structural Steel

    A249/A249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A283/A283M Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A307 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

    A320/A320M Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A351/A351M Specification for Castings, Austenitic, for Pressure-Containing Parts

    A387/A387M Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A395/A395M Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A515/A515M Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A536 Specification for Ductile Iron Castings

    A563 Specification for Carbon and Alloy Steel Nuts

    B61 Specification for Steam or Valve Bronze Castings

    B62 Specification for Composition Bronze or Ounce Metal Castings

    B88 Specification for Seamless Copper Water Tube

    B265 Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B338 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B348 Specification for Titanium and Titanium Alloy Bars and Billets

    B363 Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

    B367 Specification for Titanium and Titanium Alloy Castings

    B381 Specification for Titanium and Titanium Alloy Forgings

    B466/B466M Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Specification for Welded Copper-Nickel Pipe

    B861 Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Specification for Titanium and Titanium Alloy Wire

    B898 Specification for Reactive and Refractory Metal Clad Plate

    D2996 Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D4024 Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    F467 Specification for Nonferrous Nuts for General Use

    F468 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

    F682 Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

    F683 Practice for Selection and Application of Thermal Insulation for Piping and Machinery

    F704 Practice for Selecting Bolting Lengths for Piping System Flanged Joints

    F722 Specification for Welded Joints for Shipboard Piping Systems

    F1476 Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1548 Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications